Views
6 months ago

construction chemicals

Mantotherm Exterior

Mantotherm Exterior Paint With Silicone Acrylic Emulsion Based Exterior Paint With Silicone Additive PRODUCT DESCRIPTION Acrylic emulsion based, waterproof, long lasting, high quality, opaque finishing coat decorative exterior paint with silicon additive. AREAS OF USE Mantotherm Exterior Paint With Silicone is used as the finishing coat painting material along with the suitable primer on cement based plaster, exposed concrete, fiber cement board and thermal insulation systems of exteriors of buildings. PRODUCT ADVANTAGES • Water repellent thanks to the silicon additive in its content. • Enables the water vapor to be discharged and winds the building thanks to its high water vapor permeability. • Resistant to outdoor weather conditions, and such weather conditions as rain, snow, excessively high or low temperatures. • Poses high coating capability. • The colors of the product are fade and crack resistant. • Being water based, the product is odorless and is not harmful to human health and the environment. REFERENCE STANDARDS Certifications/Standards TS 7847 Ministry of Public Works and Settlement Item No. Ministry of Public Works and Settlement Item No.: 04.522/S QUALITY CERTIFICATES TSE APPLICATION PROCEDURE Application Surfaces Outdoors Walls; - Cement based plasters (Mantotherm Primer applied) - Concrete (MegaSıva K and MegaSıva İ applied) - Fiber cement panels (Mantotherm Primer applied) - Thermal insulation systems (as finishing coat paint) Surface Preparation • Application surfaces should be sound, clean, dust free, and free from molding oils and other foreign substances. Such materials as mortar and cement residues should be peeled off. • Mantotherm Primer should be applied to such surfaces, which may have been painted previously or is to be newly painted. Application Methods • Mantotherm Exterior Paint With Silicone should be stirred until it becomes homogenously consistent prior to the application. • The product should be diluted with fresh water in such maximum volume that is equal to 10 - 15 % of the total volume, and be applied in 2 coats with a roller, brush or a spraygun. Application Recommendations • In order to avoid any potential differences in shade on the facade, the product of the same batch number should be used on each facade. • Any extra water should not be added to the mixture. • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing. • Due care should be given to prevent the exposure of the material to direct sunlight in hot weather conditions. • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance. • The product should not be applied under windy or extremely hot weather conditions and under direct sunlight. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) APPLICATION INSTRUCTIONS Mixing Ratio The product should be mixed with water, in such volume that equal to 10 - 15 % of the volume of the product. Mixing Equipment • Low speed electrical mixer (400 cycles/min.) • Special tip stirring equipment Mixing Period The product should be mixed until a homogenous mixture is obtained. The product should be kept homogenous by stirring intermittently during the application. Application Equipment • Roller • Brush • Spray gun Equipment Cleaning The equipment used should be cleaned with water following the application before the product dries. TECHNICAL PROPERTIES Chemical Structure: Acrylic emulsion based exterior paint with silicone additive Density: 1.55 ± 0.02 gr/cm 3 Color: White and swatch card colors Viscosity: 120 - 130 KU pH: 8.5 - 9.5 Solid Matter Content: %65 ± 1 Gloss: Opaque Flashing Point: Water based – Non-flammable Diluent: Water CONSUMPTION Recommended consumption amount for application on 1 m 2 surface is 0.11 - 0.13 liter. The said value may vary, depending on the surface and ambient conditions. PACKAGING Mantotherm Exterior Paint With Silicone is delivered in net 15 liter plastic buckets. SHELF LIFE The shelf life of the product is 12 months when stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. STORAGE CONDITIONS The product should be stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. It should not be exposed to direct sunlight. The container of the product should be closed firmly when not used. SAFETY PRECAUTIONS Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application. Surface and Ambient Temperature The surface and ambient temperature should be between +5°C and +30°C whilst at application. Application Limits Dry to the touch Stand-by period between coats Full dry time Minimum 1 hour Minimum 4 hours Minimum 24 hours The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. 141

Mantotherm Acrylic Based Exterior Paint Acrylic Emulsion Based Exterior Paint PRODUCT DESCRIPTION Acrylic emulsion based, long lasting, high quality, opaque finishing coat decorative exterior paint. AREAS OF USE Mantotherm Acrylic Based Exterior Paint is used as the finishing coat painting material along with the suitable primer on cement based plaster, exposed concrete, fiber cement board and thermal insulation systems. PRODUCT ADVANTAGES • Poses high coating capability. • Resistant to outdoor weather conditions, and such weather conditions as rain, snow, excessively high or low temperatures. • Enables the water vapor to be discharged and winds the building thanks to its high water vapor permeability. • The colors of the product are fade and crack resistant. • Being water based, the product is odorless and is not harmful to human health and the environment. REFERENCE STANDARDS Certifications/Standards TS 7847 Ministry of Public Works and Settlement Item No. Ministry of Public Works and Settlement Item No.: 04.522/D QUALITY CERTIFICATES TSE APPLICATION PROCEDURE Application Surfaces Outdoors Walls; - Cement based plasters (Mantotherm Primer applied) - Concrete (MegaSıva K and MegaSıva İ applied) - Fiber cement panels (Mantotherm Primer applied) - Thermal insulation systems (as finishing coat paint) Surface Preparation • Application surfaces should be sound, clean, dust free, and free from molding oils and other foreign substances. Such materials as mortar and cement residues should be peeled off. • Mantotherm Primer should be applied to such surfaces, which may have been painted previously or is to be newly painted. Application Methods • Mantotherm Acrylic Based Exterior Paint should be stirred until it becomes homogenously consistent prior to the application. • The product should be diluted with fresh water in such maximum volume that is equal to 10 - 15% of the total volume, and be applied in 2 coats with a roller, brush or a spray gun. Application Recommendations • Any extra water should not be added to the mixture. • In order to avoid any potential differences in shade on the facade, the product of the same batch number should be used on each facade. • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing. • Due care should be given to prevent the exposure of the material to direct sunlight in hot weather conditions. • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance. • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) APPLICATION INSTRUCTIONS Mixing Ratio The product should be mixed with water, in such volume that equal to 10 - 15 % of the volume of the product. Mixing Equipment • Low speed electrical mixer (400 cycles/min.) • Special tip stirring equipment Mixing Period The product should be mixed until a homogenous mixture is obtained. The product should be kept homogenous by stirring intermittently during the application. Application Equipment • Roller • Brush • Spray gun Equipment Cleaning The equipment used should be cleaned with water following the application before the product dries. TECHNICAL PROPERTIES Chemical Structure: Acrylic emulsion based exterior paint Density: 1.60 ± 0.02 gr/cm 3 Color: White and swatch card colors Viscosity: 120 - 130 KU pH: 8.5 - 9.5 Solid Matter Content: % 66 ± 1 Gloss: Opaque Flashing Point: Water based – Non-flammable Diluent: Water CONSUMPTION Recommended consumption amount for application on 1 m 2 surface is 0.11 - 0.13 liters. The said value may vary, depending on the surface and ambient conditions. PACKAGING Mantotherm Acrylic Based Exterior Paint is delivered in net 15 liter plastic buckets. SHELF LIFE The shelf life of the product is 12 months when stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. STORAGE CONDITIONS The product should be stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. It should not be exposed to direct sunlight. The container of the product should be closed firmly when not used. SAFETY PRECAUTIONS Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application. Surface and Ambient Temperature The surface and ambient temperature should be between +5°C and +30°C whilst at application. Application Limits Dry to the touch Stand by period between coats Full dry time Minimum 1 hour Minimum 4 hours Minimum 24 hours The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. 142

Pure Color HP Pure Color HP - Invicon Chemical Solutions Gmbh
Paver Reneu Bro 8.5x11 - Vexcon Chemicals
Nanotechnology and Construction
Mapecem Premix Mapecem Premix - Northland Construction Supplies
Module 4 - Construction of a gravity fed system
BASF CC Brochure - BASF Construction Chemicals Pacific
Planicrete AC Planicrete AC - Northland Construction Supplies
Mapecem Premix Mapecem Premix - Northland Construction Supplies
Durable Connections - BASF Construction Chemicals Pacific
Chemicals For Sustainable Construction - Roof & Facade
Ground Gas Barriers Brochure - Triton Chemicals
total concrete protection how penetron®waterproofs concrete
Download water pollution from construction leaflet - States of Jersey
Construction Chemicals - TIB Chemicals AG
White Paper: Using Chemical Products in HVAC Systems - NADCA
PIPELINE REHABILITATION – PROTEGOL ... - TIB Chemicals AG
Flooring Systems Brochure Download (938Kb) - Triton Chemicals