Views
8 months ago

construction chemicals

Consumption Amount

Consumption Amount Calculation Method for Joint Fillers A Ceramic Consumption (kg/m2) =ρx (A+B) x (dxw) AxB B A: Width of ceramic (mm) B: Length of ceramic (mm) d: Thickness of ceramic (mm) w: Joint width (mm) ρ: Density of joint filler (gr/cm3) RECOMMENDED MegaFuga CONSUMPTION AMOUNTS IN kg/m 2 FOR 9 mm THICK CERAMIC Product Name Density (ρ) Ceramic Size (cm) Joint Gap (mm) 3 4 5 MegaFuga 1.876 gr/cm 3 50x25 0.304 0.405 0.507 10x10 1.013 1.351 1.688 33x33 0.307 0.409 0.512 45x45 0.225 0.300 0.375 66x33 0.230 0.307 0.384 60x60 0.169 0.225 0.281 100x50 0.152 0.203 0.253 PACKAGING MegaFuga is delivered in • Net 5 kg kraft bags of 160 units provided on a palette of 80x100 cm in dimension (800 kg) • Net 10 kg kraft bags of 110 units provided on a palette of 80x100 cm in dimension (1100 kg) • Net 20 kg kraft bags of 60 units provided on a palette of 80x100 cm in dimension (1200 kg) SHELF LIFE The shelf life of the product is 12 months when stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. STORAGE CONDITIONS The product should be stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. It should not be exposed to direct sunlight. The container of the product should be closed firmly when not used. SAFETY PRECAUTIONS Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application. 43

MegaFuga Sil Silicon Mixed, Law Water Absorbent Joint Filler G PRODUCT DESCRIPTION Cement based, elastic and water repellent joint filler with polymer and silicon additives, which is suitable for application to joint gaps, ranging between 2 and 10 mm, in indoors and outdoors spaces, and is resistant to temperature changes and also water resistant. AREAS OF USE MegaFuga Sil is suitable for use on the joints with gaps, ranging between 2 and 10 mm, on such floors coated with ceramic, natural stone, granite ceramic and marble, and on such wet areas as bathrooms, terraces and pools. It is suitable for use horizontal and vertical joint gaps on indoors and outdoors spaces. PRODUCT ADVANTAGES • Water repellent thanks to the silicon additive in its content. • Suitable for application on such surfaces that are constantly in contact with water. • Poses reduced water absorption and high abrasion resistance thanks to the special additives in its content. • Easily applied and provides a crack free, smooth appearance. • Offers a wide range of colors, which are endurable and fadeless. • Resistant to water, frost and high temperature. • Prepared and applied easily. PERFORMANCE High abrasion resistance ≤ 1000 mm 3 TS EN 12808 - 2 Bending strength after dry storage ≥ 2.5 N/mm 2 TS EN 12808 - 3 Bending strength after freezing - thawing cycles ≥ 2.5 N/mm 2 TS EN 12808 - 3 Compression strength after dry storage ≥ 15 N/mm 2 TS EN 12808 - 3 Compression strength after freezing - thawing cycles ≥ 15 N/mm 2 TS EN 12808 - 3 Contraction ≤ 3 mm/m TS EN 12808 - 4 Reduced water absorption after 30 minutes ≤ 2 gr TS EN 12808 - 5 Reduced water absorption after 240 minutes ≤ 5 gr TS EN 12808 - 5 The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. REFERENCE STANDARDS Certifications/Standards TS EN 13888/CG2WA Ministry of Public Works and Settlement Item No. Ministry of Public Works and Settlement Item No.: 04.013/2 QUALITY CERTIFICATES TSE G APPLICATION PROCEDURE Application Surfaces Indoors and Outdoors Walls; - Ceramic - Natural stone - Marble - Granite Indoors and Outdoors Floors; - Ceramic - Natural stone - Marble - Granite Pool Walls and Floors; - Ceramic - Marble Surface Preparation • The surface coating materials should have been bonded minimum 24 hours in advance. • Joint application should not be initiated before the adhesive is completely dehydrated. • Coating surface and joint gaps should have been cleaned and cleansed of oil, dirt and dust. • The joint gaps should be moisturized in order to maintain the fixed water absorption of vertical and horizontal parts. Application Methods • MegaFuga Sil joint filler should be filled into joint gaps with a plastic or rubber based joint trowel through circular, parallel and crosswise movements. • The residuary on the mortar’s surface should be scraped with a soft-tip scraper or a scraper with moisturized sponge on the tip, and the thin layer of joint, which may have remained on the surface, should be thoroughly cleaned by wiping with a moist sponge after roughly 20 minute standby time, depending on the ambient temperature. • Surface smoothening and cleaning should be performed with a dry cloth before MegaFuga Sil dries completely. Application Recommendations • The adhesive and the surface behind the coating should be completely dehumidified in order to prevent yellowing in the case of white joints and undulation in the case of colorful joints after the application. • The application thickness of the joint filler should be identical for both floor and wall applications. • MegaFuga Guard should be used in order for the prevention of the discoloration of the joint fillers used on such frequently cleaned surfaces and floors as kitchen counters and for the same to be lasting. • Such cleaning supplies as bleach, hydrochloric acid and lime remover should not be used in order to ensure that the joint fillings are not damaged. The joint gaps should be cleaned with MegaClean. • The product should, once mixed, be used before the expiration of its pot life. Any mortar, the pot life of which has expired, should not be used during the application. • Any such foreign substance as lime, cement or plaster should not be added to the mortar prepared. • Any extra water should not be added to the mixture. • The product should not be applied on unsound surfaces. The soundness and the load bearing capacity of old surfaces should be checked prior to adhesion. • The surface should be preserved from air currents and water contact during and after the application. • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing. • Due care should be taken to ensure that the material is not exposed to direct sunlight in hot weather conditions, and the product should be mixed with cold water. • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance. • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) Surface and Ambient Temperature The surface and ambient temperature should be between +5°C and +30°C whilst at application. Application Limits Useful time for prepared mortar - Pot life Drying time Opening the traffic The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. APPLICATION INSTRUCTIONS Mixing Ratio The product should be mixed with water, weighing equal to 30 - 33 % of the product. (6.0 - 6.6 liters of water for a 20 kg package) Mixing Equipment • Low speed electrical mixer (400 cycles/min.) • Special tip stirring equipment Mixing Period The product should be stirred with a low-speed mixer until any dry dust and globs are eliminated. The mortar should, then, be stirred once again for 1 to 2 minutes after being had settled for 5 to 10 minutes following preparation. Application Equipment • Joint trowel • Scraper • Cleaning Sponge Equipment Cleaning The equipment used should be cleaned with water following the application before the joint filling mortar dries. TECHNICAL PROPERTIES Chemical Structure: Cement based joint filler with silicon additive Dry Density: 1.20 ± 0.05 gr/cm 3 Mortar Density: 1.85 ± 0.05 gr/cm 3 Grain Size: ≤ 150 µm Color: A range of 30 colors Temperature Resistance: -15°C to +80°C Maximum 1.5 hours Minimum 12 hours 24 - 48 hours 44

Paver Reneu Bro 8.5x11 - Vexcon Chemicals
Ground Gas Barriers Brochure Download - Triton Chemicals
Machines, Equipments and Systems for Tunnel Construction
Health and Safety Data Sheets for Cements and Cement Products
BASF CC Brochure - BASF Construction Chemicals Pacific
Click here for PDF Guide - Womersleys
Durable Connections - BASF Construction Chemicals Pacific
Epoxy Coatings Brochure - Euclid Chemical Co
AGC Chemicals Product Range - AGCCE
GENERAL PURPOSE cEmENt - Lafarge in South Africa
Grand Housing Development Program Volume III - Gtz
manual for supervisors and project staff - International Recovery ...
Soak the buildup, let EZEE Clean work awhile, then ... - IMER USA.
Chemicals & Janitorial - HRS Janitorial Service & Supplies
Using Chemical Products in HVAC Systems: - NADCA
HeatWave 110, 120, 135, 155 Heat Only - prior to ... - AquaCal
Your reliable partner in the tool welding construction - UTP ...
conform column formers for circular columns construction formwork ...
Challenges in Catalysis for Pharmaceuticals and Fine Chemicals 3
The complete range for quality leather - Performance Chemicals ...
Download water pollution from construction leaflet - States of Jersey