Casting & Impressions

Shake-N-Cast Impression Kit
This kit features a self-contained, pre-measured water capsule and
dental stone* cas ng material packaged in a single, heavy-duty
plas c pouch. This incredibly simple-to-use kit eliminates all the
mess and guess-work inherent
with many other cas ng mediums. With Shake-N-Cast, the mixture
is always the right consistency. The Shake-N-Cast kit contains
2 lbs. (32 oz.) of dental stone and 14 fluid oz. of liquefier, factorysealed
in a tough plas c pouch. One kit is sufficient for cas ng a full
-sized, adult shoe print. Simply apply pressure to break the water
capsule, shake and knead the container for up to two minutes, cut
off a corner of the pouch and pour it into the impression. When
working in loose, dry soil or sand, we recommend preparing the
impression with Dust and Dirt Hardener.
SI-SNC42
Shake-N-Cast Impression Kit Net Wt. 42 oz.
Master Shake-N-Cast Impression Kit
This kit includes SIRCHIE®'s Shake-N-Cast dental stone* cas ng material in five (5)
pre-measured pouches. Each individual SNC42 pouch contains the correct amount of
cas ng material and water in a self-contained packet. One pouch will cast an adult size
footprint up to 15" long. Merely press down on the pouch to break the water packet,
shake for 30 seconds, knead the pouch for up to 1 1/2 minutes, and then pour into the
impression. The kit contains 2 cans of our new Aerosol Dust and Dirt Hardener for preparing
impressions in loose or sandy soil, as well as Silicone Release Agent to simplify
cast removal and cleanup. Two cans of Snow Impression Wax are included for cas ng
in ice or snow. The 2 cas ng frames are easily sized—one for footprints and one for
re tracks.
Features:
• A complete impression cas ng kit
• No more mess, no more measuring, no more mixing bowls,
no more guess work
• Simple to use
• Superior results
Contents:
5 - SNC42 Shake-N-Cast Impression Kits, Net Wt. 42 oz.
1 - FCF100 Adjustable Cas ng Frame, 7.25" x 12"-18"
1 - FCF200 Adjustable Cas ng Frame, 12" x 18"-24"
2 - 638CA Aerosol Dust & Dirt Hardener, 15 oz.
1 - SNC100CC Heavy-Duty, Molded Carrying Case, 17" x 13" x 7.375"
2 - SP1000 Aerosol Snow Impression Wax, 15 oz.
1 - SRA10 Aerosol Silicone Rubber Release Agent, 4.5 oz.
1 - KCP142 Melamine Spoon
1 - ESP30W Photo Scales, Set of 100
1 - 608E1 Evidence Tags with Ties, Set of 100
1 - Technical Instruc ons

MikroTrack
The first reusable footwear and re track impression mould material. MikroTrack creates a perfect three
dimensional
impression with accurate recording of all relevant details in the evidence. The MikroTrack impression can
be stored and will not dry. Once photographed, just mould it back together and it’s ready to use again.
1 Liter is sufficient for one foot
CS-0162
3L plas c container
SNOW PRINT POWDER
Snow impressions at the crime scene normally contain more informa on that can be recovered
through conven onal photography. The wet and transparent snow will absorb the
light when taking a picture. The result will be an impression with insufficient contrast and
without any valuable details. The SNOW PRINT POWDER can help you with these problems.
The surface of the impression can easily be brushed with the powder using a so
brush. The powder will change the surface of the impression, thereby allowing it to be
photographed with much be er contrast, recovering valuable details. This technique
works best on wet mel ng snow but also on cold frozen snow.
CS-0081
Snow Print Powder, 250ml