Views
2 weeks ago

TXF_UserManual

Controlling Belt Motion

Controlling Belt Motion To control the belt motion, select the BELT icon from the SERVICE MODE screen (Refer to Fig 7). The BELT MOTION screen appears as shown below: Fig 8: Displaying the BELT MOTION Screen Using the BELT MOTION screen, you can perform the following actions: BELT SPEED HZ: Set the speed of the Conveyor Belt. ADVANCE: Move the belt in the forward direction. REVERSE: Move the belt in the reverse direction. TUB DOWN: Lower down the tub. Setting Belt Speed To set the belt speed, select the BELT SPEED HZ icon from the BELT MOTION screen. The Numeric Keypad appears on the BELT MOTION screen, as shown below: Fig 9: Setting the Belt Speed Now, enter the belt speed in the Numeric Keypad and select the Enter button to set the belt speed. TXF Page | 14

Setting Washing Unit To set the position of washing tub, select the TUB icon from the SERVICE MODE screen. The WASHING UNIT screen appears, as shown below: Fig 10: Displaying the WASHING UNIT Screen Using the WASHING TUB screen, you can perform the following actions: TUB: Move the washing tub in upward direction. TUB DOWN: Move the washing tub in downward direction. BRUSHING OFF: Switch ON or OFF the washing tub functioning. TUB MAINTT: Move the tub to the maintenance position. Controlling Take Up Motion To update the take up motion, select the TAKE UP icon from the SERVICE MODE screen. The TAKE UP MOTION screen appears on the screen, as shown below: Fig 11: Displaying the TAKE UP MOTION Screen TXF Page | 15