TXF_UserManual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Issuing Printing Command<br />
With <strong>TXF</strong>, a rip software is provided. Using this ripping software, import the selected image and issue the Print<br />
command. Before printing, make sure the following instructions should be maintained:<br />
<br />
<br />
Make Conveyor Belt Online<br />
Set the Base Point<br />
Pausing or Canceling Print<br />
At any instance of time, user can pause or cancel the printing during it process.<br />
Follow these steps to pause or cancel the printing:<br />
Step 1: To pause the print process, press the PAUSE button from the Control Panel of the print engine, as<br />
shown below:<br />
Fig 72: Selecting the Pause Command<br />
On pressing the PAUSE button, the following screen appears, as shown below:<br />
Fig 73: Displaying the Instruction Screen<br />
Note: To resume the printing process, again press the PAUSE button.<br />
Step 2: To cancel the printing process, press and hold the SET UP button from the Control Panel (Fig. 72).<br />
Now, the printing process gets cancelled.<br />
<strong>TXF</strong><br />
Page | 44