Views
8 months ago

TXF_UserManual

Loading the Previously

Loading the Previously Saved Settings Follow these steps to load the previously saved preset: Step 1: Press the MENU button from the Control Panel of the print engine. Step 2: Press the Down arrow button and select the PRESET option, as shown below: Fig 81: Selecting the PRESET Option Step 3: After selecting the PRESET option, press the Right arrow and select the Load option, as shown below: Fig 82: Selecting the LOAD Option Step 4: Press the ENTER button to confirm the selection. Now, the settings get changed and loaded. After completing the process, the following screen appears: Fig 83: Displaying the SETUP SHEET Screen TXF Page | 48

Automatically Loading the Saved Preset When Fabric is Loaded Follow these steps to automatically load the previously saved preset: Step 1: Press the MENU button from the Control Panel of the print engine. Step 2: Press the Down arrow button and select the PRESET option, as shown below: Fig 84: Selecting the PRESET Option Step 3: After selecting the PRESET option, press the Right arrow and select the AUTO DISPLAY option, as shown below: Fig 85: Selecting the AUTO DISPLAY option Step 4: Press the Up or Down arrow button and select the ENABLE option, as shown below: Fig 86: Selecting the ENABLE Option Step 5: Press the ENTER button to confirm the selection. Now, the AUTO DISPLAY option is enabled and whenever the fabric is loaded, the screen for loading the saved preset appears. Follow the below mentioned step to load the saved preset: Step 1: Press the SETUP button from the Control Panel of the print engine after loading the fabric. The LOAD PRESET screen appears, as shown below: Fig 87: Selecting the Preset Setting Option Step 2: Press the Up or Down arrow button and select the desired preset option to load previously saved settings (Refer to Fig 87). Step 3: Press the ENTER button to confirm the selection. Now, the preset setting gets applied to the currently loaded fabric. TXF Page | 49