6 months ago

Android Car Navigation

5. System/MCU update 5.1

5. System/MCU update 5.1 Update System Set→Common set→Update→OK (must put into “update SD card”) 5.1 Update MCU Application→set→common set→extended set→123456(OK)→select car model→update MCU. 21

6.FAQ QUESTION SOLUTION REPAIR Con not start Radio without work 1:Check the power wire 2:Check power fuse is off or burned 3:The reset button to check whether there is lose 1:Check radio antenna is normal 1: Choose a radio station and whether the sound normal 2:Use LOC and DX scan 3:ISO power wire and wire P。ANT wire and original radio wire link 4:check the scan area Refer to《link of power wire》 Change a 15A fuse Press on reset The radio antenna install in Set DX Choice your area range NAVI without work 1:Map problem 2:Map data broken 3:Map use of expired 4:GPS NO SIGNAL: Uninstall map and install again Install NAVI map again Install NAVI map again 22

In-Car Multimedia/Navigation 2003-2004 - Pioneer
Car Specific Navigation System - GPStar
scion alpine navigation interface kit - Car Navigation systems ...
2011 Catalog for Car Audio, Multimedia, Navigation and Marine ...
In-car apps: Android, HTML5 or something else instead? - SBD
Navigator Child Car Seat - Kiddicare
Introducing A True Car Navigation System Unlike Any - Navi & Map
Introduction to Android: “Hello, Android!”
Secureview Android App -
Article Android Inside - FoxyTag
MontaVista Android Solution for ECONA
iPhone or Android: Which Is Better?
Secureview Android App -
Whats New in Android
An Overview of The Android Ecosystem
NFC with Android - Fachhochschule Nordwestschweiz