Views
5 months ago

Getting Started

5 • THE ADVANCED

5 • THE ADVANCED TRANSFER PANEL Prompt Acceleration Deceleration Turning Velocity Factor Zone Control Rule Units Initial Position Status Initial Position Station Name Intersection Name Network Link Name Zone Initial Status Description Specifies the acceleration in length units per unit time squared that is applied to return a guided transporter to its normal operating velocity after slowing down. The unit time is specified in the Units field. Specifies the deceleration in length units per unit time squared that is applied to brake a guided transporter when it needs to slow down or stop. The unit time is specified in the Units field. Defines the factor to be applied to a guided transporter’s velocity when it negotiates a turn. In order for slow-downs through turns to be performed automatically, directions must be defined for all network links in the network Network Name. Determines when a guided transporter controlling a zone releases it, allowing another transporter access to that zone. This field specifies the time units for the Acceleration and Deceleration entries (such as per minute squared or per hour squared). Repeat group that allows the specification of initial position. One entry may be used for each unit in the transporter set (as defined by Capacity). Determines the type of initial position for the transporter unit(s). If a free-path transporter, Default will place the transporter at the first station location specified in the Distance module Distance Set. If a guided transporter, Default will place the transporter at the first network link specified in the Network module Network Name. Name of the station for the transporter’s initial position. Defines the name of the intersection at which the guided transporter unit will be initialized. Defines the name of the network link at which the guided transporter unit will be initialized. Defines the zone number on the network link at which the guided transporter unit will be initialized. Establishes the initial status, Active or Inactive, of the transporter unit. 105

GETTING STARTED WITH ARENA Prompt Size Based On Size Value Report Statistics Description Determines whether the guided transporter’s size will be specified in length units or number of zones. Specifies the initial transporter size in number of length units or zones according to the Size Based On field. Specifies whether or not statistics will be collected automatically. Distance module DESCRIPTION The Distance module is used to define the travel distances between all stations that free-path transporters may visit. It consists of a distance name and a list of station pairs and individual distances. TYPICAL USES • Defining the distance a forklift travels between processing stations • Defining the distance hospital gurneys travel between various diagnostic areas PROMPTS Prompt Name Beginning Station Ending Station Distance Description Distance set name. Starting station name. Ending station name. Distance between the beginning and ending station. 106

SonicWALL EX9000 Getting Started Guide - Ingram Micro
PXI and PCI Getting Started - Egmont Instruments
Blueback Project Tracker Getting Started Guide - Ocean
Getting Started Guide
Getting Started Guide
LTspice IV Getting Started Guide
Painting Getting Started Craft Sheet - Play Resource
School Wellness Policy Getting Started - Connecticut State ...
M70-101 Latest Exam BrainDumps
getting started with eventstudio - EventHelix.com
98-375 BrainDumps Discount
Telit Getting Started Guide - SemiconductorStore.com
Presentation slides [PDF] - Joint Steering Committee for ...
Logistics MBA. Get Started. - Institute for Defense & Business
TransienT immuniTy simulaTors For ConDuCTeD DisTurBanCes
Getting Started - Ramsey County Parks and Recreation
The Terraform Book
4g pa design gets help 4g pa design gets help - AWR Corporation
Arena Material: chapter 5 - AS Nida