Views
7 months ago

Getting Started

6 • THE FLOW PROCESS

6 • THE FLOW PROCESS PANEL The flow rate of the entity is regulated according to the maximum rate(s) of the source regulator and/or destination regulator. Additionally, the flow rate may be further constrained due to starvation or blocking from empty or full tanks. The initial maximum rate of a regulator is specified in the Tank module. A regulator’s maximum rate may be changed during a run using the Regulate module. The RegulatorMaxRate(Regulator ID) function returns the current maximum rate of a regulator. The RegulatorRate(Regulator ID) function returns the current rate of a regulator. The actual quantity transferred by an entity in the Flow module may be stored in the Quantity Save Attribute when the entity exits the module. TYPICAL USES • Adding material to a tank • Removing material from a tank • Transferring material between two tanks PROMPTS Prompt Description Name Type Flow Destination/ Source: The module’s identifier. The flow type, which may be Transfer, Add, or Remove. Source Regulator Type Indicates how the source regulator will be specified; as Regulator, Regulator Set, Attribute, Expression. Regulator Name Regulator Set Name Set Index Attribute Name Expression Destination Regulator Type Regulator Name Name of the source regulator. Name of the regulator set that contains the source regulator name. Index into the regulator set. Name of the attribute that stores the source regulator name. Expression that evaluates to the source regulator name. Indicates how the destination regulator will be specified; as Regulator, Regulator Set, Attribute, Expression. Name of the destination regulator. 113

GETTING STARTED WITH ARENA Prompt Description Regulator Set Name Set Index Attribute Name Expression Stop Flow After: Quantity Time Units Signal Value Priority Allocation Name of the regulator set that contains the destination regulator name. Index into the regulator set. Name of the attribute that stores the destination regulator name. Expression that evaluates to the destination regulator name. The flow will be stopped after this quantity has been transferred. The flow will be stopped after this time duration has elapsed. The time units of the Time. The flow will be stopped if this signal value is received. The priority of the flow operation when allocating limited input or output to multiple flow operations occurring at a tank. Determines how the time and costs accrued during the flow operation will be allocated to the entity. Quantity Save Attribute Attribute to save the quantity transferred by the entity. Regulate module DESCRIPTION The Regulate module provides discrete control for assigning the maximum rates of regulators defined in the Tank module. TYPICAL USES • Used to simulate such actions as the closing or opening of valves 114

Getting Started - Ramsey County Parks and Recreation
Getting Started Guide
Getting Started Guide
getting started with eventstudio - EventHelix.com
Telit Getting Started Guide - SemiconductorStore.com
LTspice IV Getting Started Guide
Logistics MBA. Get Started. - Institute for Defense & Business
98-375 BrainDumps Discount
The Terraform Book
Presentation slides [PDF] - Joint Steering Committee for ...
4g pa design gets help 4g pa design gets help - AWR Corporation
TransienT immuniTy simulaTors For ConDuCTeD DisTurBanCes
SonicWALL EX9000 Getting Started Guide - Ingram Micro
PXI and PCI Getting Started - Egmont Instruments
Blueback Project Tracker Getting Started Guide - Ocean
Painting Getting Started Craft Sheet - Play Resource
School Wellness Policy Getting Started - Connecticut State ...
M70-101 Latest Exam BrainDumps
Arena Material: chapter 5 - AS Nida