AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Press ENTER to create rounds as shown in
figure.
Likewise, select the round edge as shown in
figure and select the Next option from the
command line; the edges on the bottom face of
the model will be highlighted.
Click the Orbit button on the Navigation Bar
and rotate the model.
Select the Accept option to view rounds and
Click the Fillet Edge button on the Solid
Editing panel.
Select the Loop option from the command line
and select the edge from the model, as shown in
figure; the edges on the front face of the model
fillets on the bottom face.
Select the Radius option and type 2. Press
ENTER to accept.
Press ENTER twice to create rounds as shown in
figure.
are highlighted. Also the message, “Enter an
option [Accept/Next] :” appears in the
command line.
Select the Next option from the command line;
the edges on the side face will be highlighted.
Select the Accept button; rounds and fillets are
displayed on the side face.
270