AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Select the section view from the layout; the
message, “Specify center point or [Hidden
lines/Scale/Visibility/Boundary/model
Edge/Annotation] :” appears in the
command line.
Select a point on the section view, as shown
below; the message, “Specify size of boundary
or [Rectangular/Undo]:” appears in the
command line.
Draw a circle similar to the one shown below.
Exercises
Create 3D models using the drawing views and dimensions.
Next, place the detail view on the lower right
corner of the layout.
Select the Smooth with border button on the
Model Edge panel of the Detail View Creation
tab.
Press Enter; the detail view will be created.
280