AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Arranging Objects of the drawing in
Layers
On the ribbon, click the Home > Layers > Layer
Properties. This displays the Layer Properties
Manager.
On the Layer Properties Manager, click the New
Layer button.
Type Wall in the layer Name box and press
Enter.
Create another layer, and then type-in Door.
Press Enter.
Likewise, create other layers and define the
layer properties, as shown below. Refer to
Chapter 3 to learn more about layers.
Press Esc to deselect the selected objects.
Likewise, transfer the other objects to their
respective layers.
Close the Layer Properties Manager.
Select the Dining set, cupboard, and bed.
On the ribbon, click Home > Layers > Layer
drop-down > Furniture. The selected objects
will be transferred to the Furniture layer.
Open the Layer Properties Manager and
click the bulb symbols associated to Door,
306