Views
7 months ago

# AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

## Part 1:

Part 1: AutoCAD Basics circle will be created passing through the selected points. Click the / button and then the 2 button on the Number Pad. Click the = button; the value 28.8675 is displayed in the value box. Example 5 (Tan, Tan, Radius) In this example, you will create a circle by selecting two objects, and then specifying the radius of the circle. This creates a circle tangent to the selected objects. Click Home > Utilities > Measure > Radius on the ribbon. The message, “Select arc or circle: “appears in the command line. Click Home > Draw > Circle > Tan, Tan, Select the circle passing through the three vertices of the triangle; the radius and diameter values of the circle will be displayed above the command line. Radius on the ribbon; the message, “Specify point on object for first tangent of circle:” appears in the command line. Select the horizontal line of the triangle; the message, “Specify point on object for second tangent of circle:” appears in the command line. Select anyone of the inclined lines; the message, “Specify radius of circle” appears in the command line. Click the Paste value to command line button on the Quick Calculator; the value 28.8675 will be pasted in the command line. Click Home > Utilities > Quick Calculator on the ribbon; the Quick Calculator appears. Type-in 57.7350 in the Quick Calculator. 53

Part 1: AutoCAD Basics Select the two inclined lines. This creates a circle tangent to the selected lines. Press ENTER to specify the radius; the circle will be created touching all three sides of the triangle. Save and close the file. Drawing Arcs An arc is a portion of a circle. The total angle of an arc will always be less than 360 degrees, whereas the total angle of a circle is 360 degrees. AutoCAD provides you with eleven ways to draw an arc. You can draw arcs in different ways by using the tools Save and close the file. Example 6 (Tan, Tan, Tan) In this example, you will create a circle by selecting available in the Arcs drop-down of the Draw panel. The usage of these tools will depend on your requirement. Some methods to create arcs are explained in the following examples. three objects to which it will be tangent. Click the Open button on the Quick Access Toolbar; the Select File dialog appears. Browse to the location of Lineexample3.dwg file and double-click on it; the file will be opened. Click Home > Draw > Circle > Tan, Tan, Tan on the ribbon. Select the bottom horizontal line of the drawing. 54

• Page 2 and 3:

• Page 4:

• Page 7 and 8:

Chapter 3: Drawing Aids ...........

• Page 9 and 10:

Exercise 1 ........................

• Page 11 and 12:

Using the Fillet Edge tool ........

• Page 13 and 14:

Starting a New Assembly File ......

• Page 15 and 16:

TUTORIAL 7 ........................

• Page 17 and 18:

• Page 21 and 22:

• Page 23 and 24: Part 1: AutoCAD Basics Starting Aut
• Page 25 and 26: Part 1: AutoCAD Basics Tip: If the
• Page 27 and 28: Part 1: AutoCAD Basics Graphics Win
• Page 29 and 30: Part 1: AutoCAD Basics Infer Constr
• Page 31 and 32: Part 1: AutoCAD Basics Dynamic Inpu
• Page 33 and 34: Part 1: AutoCAD Basics Annotation S
• Page 35 and 36: Part 1: AutoCAD Basics balloon noti
• Page 37 and 38: Part 1: AutoCAD Basics Changing the
• Page 39 and 40: Part 1: AutoCAD Basics Shortcut Men
• Page 41 and 42: Part 1: AutoCAD Basics However, if
• Page 43 and 44: Part 1: AutoCAD Basics The Select T
• Page 45 and 46: Part 1: AutoCAD Basics Command List
• Page 47 and 48: Part 1: AutoCAD Basics DIMSTYLE D U
• Page 49 and 50: Part 1: AutoCAD Basics DIST DI Used
• Page 51 and 52: Part 1: AutoCAD Basics INSERT I Use
• Page 53 and 54: Part 1: AutoCAD Basics MSPACE MS Us
• Page 55 and 56: Part 1: AutoCAD Basics QUICKCALC QC
• Page 57 and 58: Part 1: AutoCAD Basics SPELL SP Use
• Page 59 and 60: Part 1: AutoCAD Basics XLINE XL Use
• Page 61 and 62: Part 1: AutoCAD Basics CONE Used to
• Page 63 and 64: Part 1: AutoCAD Basics MATERIALASSI
• Page 65 and 66: Part 1: AutoCAD Basics SPACETRANS U
• Page 67 and 68: Part 1: AutoCAD Basics 46
• Page 69 and 70: Part 1: AutoCAD Basics below. Turn
• Page 71 and 72: Part 1: AutoCAD Basics Save the fi
• Page 73: Part 1: AutoCAD Basics Example 2(Ce
• Page 77 and 78: Part 1: AutoCAD Basics Pick a poin
• Page 79 and 80: Part 1: AutoCAD Basics Specify th
• Page 81 and 82: Part 1: AutoCAD Basics methods are
• Page 83 and 84: Part 1: AutoCAD Basics Activate th
• Page 85 and 86: Part 1: AutoCAD Basics 64 Drawing B
• Page 87 and 88: Part 1: AutoCAD Basics On the Stat
• Page 89 and 90: Part 1: AutoCAD Basics easily turn-
• Page 91 and 92: Part 1: AutoCAD Basics click the do
• Page 93 and 94: Part 1: AutoCAD Basics From: Locate
• Page 95 and 96: Part 1: AutoCAD Basics Using Object
• Page 97 and 98: Part 1: AutoCAD Basics Click Zoo
• Page 99 and 100: Part 1: AutoCAD Basics Using Zoom-S
• Page 101 and 102: Part 1: AutoCAD Basics 80
• Page 103 and 104: Part 1: AutoCAD Basics The Copy too
• Page 105 and 106: Part 1: AutoCAD Basics command line
• Page 107 and 108: Part 1: AutoCAD Basics Define secon
• Page 109 and 110: Part 1: AutoCAD Basics The Stretch
• Page 111 and 112: Part 1: AutoCAD Basics Rotate Items
• Page 113 and 114: Part 1: AutoCAD Basics The Path Arr
• Page 115 and 116: Part 1: AutoCAD Basics The followin
• Page 117 and 118: Part 1: AutoCAD Basics Convert to A
• Page 119 and 120: Part 1: AutoCAD Basics Refine Verti
• Page 121 and 122: Part 1: AutoCAD Basics Type 80 in
• Page 123 and 124: Part 1: AutoCAD Basics Click OK; t
• Page 125 and 126:

Part 1: AutoCAD Basics Type 5 and

• Page 127 and 128:

• Page 129 and 130:

• Page 131 and 132:

• Page 133 and 134:

• Page 135 and 136:

Part 1: AutoCAD Basics created by u

• Page 137 and 138:

Part 1: AutoCAD Basics Use the Off

• Page 139 and 140:

Part 1: AutoCAD Basics Click the C

• Page 141 and 142:

Part 1: AutoCAD Basics Move the p

• Page 143 and 144:

Part 1: AutoCAD Basics Select t

• Page 145 and 146:

Part 1: AutoCAD Basics Click the

• Page 147 and 148:

Part 1: AutoCAD Basics Exercise 4 C

• Page 149 and 150:

• Page 151 and 152:

Part 1: AutoCAD Basics Click Annot

• Page 153 and 154:

Part 1: AutoCAD Basics Diameter DIA

• Page 155 and 156:

Part 1: AutoCAD Basics Click Anno

• Page 157 and 158:

Part 1: AutoCAD Basics Break DIMBRE

• Page 159 and 160:

Part 1: AutoCAD Basics Click Zoom

• Page 161 and 162:

Part 1: AutoCAD Basics Select the

• Page 163 and 164:

Part 1: AutoCAD Basics On the Home

• Page 165 and 166:

Part 1: AutoCAD Basics Click OK

• Page 167 and 168:

Part 1: AutoCAD Basics Position Coc

• Page 169 and 170:

Part 1: AutoCAD Basics Click Home

• Page 171 and 172:

Part 1: AutoCAD Basics Press ENTER

• Page 173 and 174:

• Page 175 and 176:

Part 1: AutoCAD Basics Editing Dime

• Page 177 and 178:

Part 1: AutoCAD Basics In the Prop

• Page 179 and 180:

Part 1: AutoCAD Basics Method: Limi

• Page 181 and 182:

Part 1: AutoCAD Basics Constraint F

• Page 183 and 184:

Part 1: AutoCAD Basics Select a po

• Page 185 and 186:

Part 1: AutoCAD Basics Click Par

• Page 187 and 188:

Part 1: AutoCAD Basics Click the A

• Page 189 and 190:

Part 1: AutoCAD Basics Also, you wi

• Page 191 and 192:

Part 1: AutoCAD Basics Click the P

• Page 193 and 194:

Part 1: AutoCAD Basics Exercise 2 I

• Page 195 and 196:

Part 1: AutoCAD Basics Example 2: I

• Page 197 and 198:

Part 1: AutoCAD Basics Click the P

• Page 199 and 200:

Part 1: AutoCAD Basics You can also

• Page 201 and 202:

Part 1: AutoCAD Basics Example: Cr

• Page 203 and 204:

Part 1: AutoCAD Basics Pick a poin

• Page 205 and 206:

• Page 207 and 208:

• Page 209 and 210:

Part 1: AutoCAD Basics Set the Ann

• Page 211 and 212:

Part 1: AutoCAD Basics following ex

• Page 213 and 214:

Part 1: AutoCAD Basics In the Ins

• Page 215 and 216:

Part 1: AutoCAD Basics Using Tool P

• Page 217 and 218:

Part 1: AutoCAD Basics Enter 4 as

• Page 219 and 220:

Part 1: AutoCAD Basics Expand the

• Page 221 and 222:

Part 1: AutoCAD Basics option can b

• Page 223 and 224:

Part 1: AutoCAD Basics Example 1:

• Page 225 and 226:

Part 1: AutoCAD Basics Select the

• Page 227 and 228:

Part 1: AutoCAD Basics Select a p

• Page 229 and 230:

• Page 231 and 232:

• Page 233 and 234:

Part 1: AutoCAD Basics Click the L

• Page 235 and 236:

Part 1: AutoCAD Basics Use the Pa

• Page 237 and 238:

• Page 239 and 240:

Part 1: AutoCAD Basics Primary Unit

• Page 241 and 242:

Part 1: AutoCAD Basics Object Scale

• Page 243 and 244:

Part 1: AutoCAD Basics Set Paper T

• Page 245 and 246:

• Page 247 and 248:

Part 1: AutoCAD Basics Select the

• Page 249 and 250:

Part 1: AutoCAD Basics Toolbar; the

• Page 251 and 252:

Part 1: AutoCAD Basics also downloa

• Page 253 and 254:

Part 1: AutoCAD Basics On the ribb

• Page 255 and 256:

• Page 257 and 258:

Part 1: AutoCAD Basics Tip: If the

• Page 259 and 260:

Part 1: AutoCAD Basics rotate the m

• Page 261 and 262:

Part 1: AutoCAD Basics Click Home

• Page 263 and 264:

Part 1: AutoCAD Basics down > Wiref

• Page 265 and 266:

Part 1: AutoCAD Basics become paral

• Page 267 and 268:

Part 1: AutoCAD Basics Creating Oth

• Page 269 and 270:

Part 1: AutoCAD Basics The other op

• Page 271 and 272:

Part 1: AutoCAD Basics Click S

• Page 273 and 274:

Part 1: AutoCAD Basics Change th

• Page 275 and 276:

Part 1: AutoCAD Basics Make the Ske

• Page 277 and 278:

• Page 279 and 280:

Part 1: AutoCAD Basics Select the

• Page 281 and 282:

Part 1: AutoCAD Basics Using the He

• Page 283 and 284:

• Page 285 and 286:

Part 1: AutoCAD Basics be moved as

• Page 287 and 288:

Part 1: AutoCAD Basics Click the O

• Page 289 and 290:

Part 1: AutoCAD Basics three points

• Page 291 and 292:

Part 1: AutoCAD Basics Press ENTER

• Page 293 and 294:

Part 1: AutoCAD Basics Using the Of

• Page 295 and 296:

Part 1: AutoCAD Basics Select the c

• Page 297 and 298:

Part 1: AutoCAD Basics Press ENTER

• Page 299 and 300:

Part 1: AutoCAD Basics Set the Sca

• Page 301 and 302:

Part 1: AutoCAD Basics Select the

• Page 303 and 304:

• Page 305 and 306:

• Page 307 and 308:

Part 1: AutoCAD Basics Click to c

• Page 309 and 310:

Part 1: AutoCAD Basics 118, and the

• Page 311 and 312:

• Page 313 and 314:

Part 1: AutoCAD Basics Press Esc t

• Page 315 and 316:

Part 1: AutoCAD Basics base point.

• Page 317 and 318:

Part 1: AutoCAD Basics Move the po

• Page 319 and 320:

Part 1: AutoCAD Basics Trim the un

• Page 321 and 322:

Part 1: AutoCAD Basics Likewise, c

• Page 323 and 324:

Part 1: AutoCAD Basics Offset the

• Page 325 and 326:

Part 1: AutoCAD Basics Select the

• Page 327 and 328:

Part 1: AutoCAD Basics Arranging Ob

• Page 329 and 330:

Part 1: AutoCAD Basics Creating Gri

• Page 331 and 332:

Part 1: AutoCAD Basics Insert the

• Page 333 and 334:

Part 1: AutoCAD Basics Save and cl

• Page 335 and 336:

Part 2: Inventor Basics

• Page 337 and 338:

Part 2: Autodesk Inventor Basics In

• Page 339 and 340:

Part 2: Autodesk Inventor Basics Th

• Page 341 and 342:

Part 2: Autodesk Inventor Basics Qu

• Page 343 and 344:

Part 2: Autodesk Inventor Basics Di

• Page 345 and 346:

Part 2: Autodesk Inventor Basics To

• Page 347 and 348:

Part 2: Autodesk Inventor Basics 32

• Page 349 and 350:

Part 2: Autodesk Inventor Basics 9.

• Page 351 and 352:

Part 2: Autodesk Inventor Basics No

• Page 353 and 354:

Part 2: Autodesk Inventor Basics Te

• Page 355 and 356:

Part 2: Autodesk Inventor Basics Ad

• Page 357 and 358:

Part 2: Autodesk Inventor Basics St

• Page 359 and 360:

Part 2: Autodesk Inventor Basics Th

• Page 361 and 362:

Part 2: Autodesk Inventor Basics A

• Page 363 and 364:

Part 2: Autodesk Inventor Basics 2.

• Page 365 and 366:

Part 2: Autodesk Inventor Basics 6.

• Page 367 and 368:

Part 2: Autodesk Inventor Basics Th

• Page 369 and 370:

Part 2: Autodesk Inventor Basics An

• Page 371 and 372:

Part 2: Autodesk Inventor Basics 3.

• Page 373 and 374:

Part 2: Autodesk Inventor Basics 13

• Page 375 and 376:

Part 2: Autodesk Inventor Basics 2.

• Page 377 and 378:

Part 2: Autodesk Inventor Basics Pl

• Page 379 and 380:

Part 2: Autodesk Inventor Basics 9.

• Page 381 and 382:

Part 2: Autodesk Inventor Basics 26

• Page 383 and 384:

Part 2: Autodesk Inventor Basics 36

• Page 385 and 386:

Part 2: Autodesk Inventor Basics Ed

• Page 387 and 388:

Part 2: Autodesk Inventor Basics 4.

• Page 389 and 390:

Part 2: Autodesk Inventor Basics Cr

• Page 391 and 392:

Part 2: Autodesk Inventor Basics Ad

• Page 393 and 394:

Part 2: Autodesk Inventor Basics 12

• Page 395 and 396:

Part 2: Autodesk Inventor Basics 3.

• Page 397 and 398:

Part 2: Autodesk Inventor Basics 4.

• Page 399 and 400:

Part 2: Autodesk Inventor Basics 7.

• Page 401 and 402:

Part 2: Autodesk Inventor Basics 16

• Page 403 and 404:

Part 2: Autodesk Inventor Basics 30

• Page 405 and 406:

Part 2: Autodesk Inventor Basics 4.

• Page 407 and 408:

Part 2: Autodesk Inventor Basics 6.

• Page 409 and 410:

Part 2: Autodesk Inventor Basics 5.

• Page 411 and 412:

Part 2: Autodesk Inventor Basics 2.

• Page 413 and 414:

Part 2: Autodesk Inventor Basics 19

• Page 415 and 416:

Part 2: Autodesk Inventor Basics 2.

• Page 417 and 418:

Part 2: Autodesk Inventor Basics 34

• Page 419 and 420:

Part 2: Autodesk Inventor Basics 3.

• Page 421 and 422:

Part 2: Autodesk Inventor Basics 8.

• Page 423 and 424:

Part 2: Autodesk Inventor Basics 2.

• Page 425 and 426:

Part 2: Autodesk Inventor Basics 29

• Page 427 and 428:

Part 2: Autodesk Inventor Basics 2D

• Page 429 and 430:

Part 2: Autodesk Inventor Basics 21

• Page 431 and 432:

Part 2: Autodesk Inventor Basics 35

• Page 433 and 434:

Part 2: Autodesk Inventor Basics Cr

• Page 435 and 436:

Part 2: Autodesk Inventor Basics 14

• Page 437 and 438:

Part 2: Autodesk Inventor Basics Le

• Page 439 and 440:

Part 2: Autodesk Inventor Basics Ad

• Page 441 and 442:

Part 2: Autodesk Inventor Basics va

• Page 443 and 444:

Part 2: Autodesk Inventor Basics Cr

• Page 445 and 446:

Part 2: Autodesk Inventor Basics 6.

• Page 447 and 448:

Part 2: Autodesk Inventor Basics 6.

• Page 449 and 450:

Part 2: Autodesk Inventor Basics 4.

• Page 451 and 452:

Part 2: Autodesk Inventor Basics 2.

• Page 453 and 454:

Part 2: Autodesk Inventor Basics 6.

• Page 455 and 456:

Part 2: Autodesk Inventor Basics 8.

• Page 457 and 458:

Part 2: Autodesk Inventor Basics Ch

• Page 459 and 460:

Part 2: Autodesk Inventor Basics 3.

• Page 461 and 462:

Part 2: Autodesk Inventor Basics Cr

• Page 463 and 464:

Part 2: Autodesk Inventor Basics

• Page 465 and 466:

Part 2: Autodesk Inventor Basics 8.

• Page 467 and 468:

Part 2: Autodesk Inventor Basics 14

• Page 469 and 470:

Part 2: Autodesk Inventor Basics Cr

• Page 471 and 472:

Part 2: Autodesk Inventor Basics Yo

• Page 473 and 474:

Part 2: Autodesk Inventor Basics 12

• Page 475 and 476:

Part 2: Autodesk Inventor Basics Ch

• Page 477 and 478:

Part 2: Autodesk Inventor Basics 38

• Page 479 and 480:

Part 2: Autodesk Inventor Basics 10

• Page 481 and 482:

Part 2: Autodesk Inventor Basics 8.

• Page 483 and 484:

Part 2: Autodesk Inventor Basics 6.

• Page 485 and 486:

Part 2: Autodesk Inventor Basics 4.

• Page 487 and 488:

Part 2: Autodesk Inventor Basics Th

• Page 489 and 490:

Part 2: Autodesk Inventor Basics 7.

• Page 491 and 492:

Part 2: Autodesk Inventor Basics 3.

• Page 493 and 494:

Part 2: Autodesk Inventor Basics Dr

• Page 495 and 496:

Part 2: Autodesk Inventor Basics On

• Page 497 and 498:

Part 2: Autodesk Inventor Basics 1.

• Page 499 and 500:

Part 2: Autodesk Inventor Basics 2.

• Page 501 and 502:

Part 2: Autodesk Inventor Basics 11

• Page 503 and 504:

Part 2: Autodesk Inventor Basics 32

• Page 505 and 506:

Part 2: Autodesk Inventor Basics 6.

• Page 507 and 508:

Part 2: Autodesk Inventor Basics 48

• Page 509 and 510:

Part 2: Autodesk Inventor Basics Pr

• Page 511 and 512:

Part 2: Autodesk Inventor Basics 20

• Page 513 and 514:

Part 2: Autodesk Inventor Basics 22

AutoCAD Inventor LT Suite 2013 Brochure - Autodesk
AutoCAD Inventor Simulation 2012 Technical ... - Applied Software
AutoCAD Inventor Simulation 2012 Overview ... - Applied Software
1-58503-294-8 -- AutoCAD LT 2007 Tutorial - SDC Publications
AutoCAD LT® 2011 Tutorial - SDC Publications
978-1-58503-552-6 -- AutoCAD 2011 Tutorial ... - SDC Publications
AutoCAD® 2006 Tutorial - SDC Publications
978-1-58503-501-4 -- AutoCAD 2010 Tutorial ... - SDC Publications
158503245X - AutoCAD LT 2006 Tutorial - SDC Publications
AutoCAD 2007 Tutorial: 3D Modeling - SDC Publications
1-58503-294-8 -- AutoCAD LT 2007 Tutorial - SDC Publications
Engineering Graphics Essentials with AutoCAD ... - SDC Publications
Pro/ENGINEER Tutorial
978-1-58503-434-5 -- AutoCAD 2009 Tutorial ... - SDC Publications
978-1-58503-685-1 -- Tools for Design with VEX ... - VEX Robotics
Pro/ENGINEER WILDFIRE 2.0 Tutorial - SDC Publications
Autodesk InventorÂ®
978-1-58503-505-2 -- AutoCAD LT 2010 Tutorial - SDC Publications
Inventor Rendering Tutorial