Pallmann_Homeowner_Finish_Guide_04-18
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Maintenance<br />
WEEKLY<br />
PALLMANN ® Hardwood Floor Cleaner is a non-toxic,<br />
streak-free pH neutral formula for daily cleaning and<br />
maintenance of residential and commercial no-wax<br />
wood floor finishes.<br />
The PALLMANN ® Hardwood Floor Cleaner may<br />
be used with the PALLMANN ® Microfiber Pad on a<br />
weekly basis or as needed to thoroughly clean your<br />
floors. Using the PALLMANN ® Hardwood Floor Dusting<br />
Pad, lightly dust the floor to remove large debris.<br />
A vacuum may also be used for large areas. Clean<br />
stubborn spots, spills, and shoe marks by spraying<br />
the Hardwood Floor Cleaner directly on the areas.<br />
MONTHLY<br />
Inspect protector pads on furniture and ensure that all walk-off mats are in proper locations.<br />
Also, visually inspect the wood floor for traffic patterns that may be present. If a traffic<br />
pattern is noticeable, it may be time to consult a wood flooring professional to discuss<br />
recoating your wood floors.<br />
YEARLY<br />
Contact a professional hardwood flooring contractor to deep clean your wood floors<br />
using PALLMANN ® Clean Strong product every year. Over time, everyday residues such as<br />
oils, grease, and dirt will accumulate on the hardwood floor. These residues can act as an<br />
abrasive which may cause premature finish wear. The PALLMANN ® Clean Strong product is<br />
a professional product that should only be used by a professional hardwood flooring<br />
contractor.<br />
SEVERAL YEARS LATER<br />
Your wood floor may need a new coat of finish several years after the initial application. This<br />
will ensure that you do not wear down the current finish to bare wood, causing expensive sanding<br />
procedures. Compared to re-sanding, re-coating is an inexpensive procedure that often can<br />
be completed in one day with little to no dust in the home. We recommend using our dustless<br />
recoating product PALL-X BOND in combination with one of our waterborne finishes.<br />
PALLMANN | A brand of Uzin Utz Group<br />
Aurora, CO 80011 USA | Phone: 720.374.4810<br />
pallmann.us@uzin-utz.com I pallmann.us<br />
<strong>Finish</strong><br />
<strong>Guide</strong>
Who is PALLMANN?<br />
Choosing the Perfect Sealer<br />
Choosing the Perfect <strong>Finish</strong><br />
PALL-X COLOR<br />
Hardwood floor sealer<br />
is applied to the surface of the<br />
Hardwood floor finish creates lasting beauty and protects wood flooring from wear, dirt<br />
and moisture while giving the wood an attractive color and sheen.<br />
wood floor to protect against<br />
stains and damage.<br />
PALL-X 98 <strong>Finish</strong><br />
PALL-X COLOR Sealer<br />
PALL-X 98 is a clear finish which allows the natural beauty of the floor to<br />
PALL-X 325 CLEAR<br />
PALL-X COLOR’s unique formula<br />
reacts with most wood species<br />
to bring out the warm rich tones<br />
of the wood. This sealer is<br />
recommended to enhance the<br />
shine through. It is available in three popular sheens: semi-gloss, satin,<br />
and matte. VOC compliant and 100% fully cured in 4 days allows you to<br />
be back on your floor quicker than when choosing traditional oil modified<br />
polyurethanes.<br />
A two component waterborne hardwood floor finish, PALL-X 98 is designed<br />
Since 1900, PALLMANN has been<br />
providing the latest innovation and<br />
technology advancements to the wood<br />
flooring industry by creating finishes and<br />
maintenance products that are safe for<br />
the environment, while also providing<br />
beauty, durability and longevity for your<br />
Red Oak<br />
PALL-X COLOR<br />
vibrancy and depth of the stain<br />
color. Note: do not use over<br />
white or pastel stains.<br />
PALL-X 325 CLEAR Sealer<br />
PALL-X 325 CLEAR sealer is ideal<br />
when a clear, light tone look is<br />
desired. It is also recommended<br />
over white or pastel stains prior<br />
for commercial and high traffic residential applications.<br />
PALL-X POWER <strong>Finish</strong><br />
PALL-X POWER is a clear finish which allows the natural beauty of the floor<br />
to shine through. It is available in four popular sheens: gloss, semi-gloss,<br />
satin, and ultra matte. VOC compliant and 100% fully cured in 5 days<br />
allows you to be back on your floor quicker than when choosing traditional<br />
oil modified polyurethanes.<br />
home’s wood flooring investment.<br />
to the application of the final<br />
A single component waterborne hardwood floor finish, PALL-X POWER<br />
PALLMANN’s project references include<br />
grand ballrooms in the French Alps to<br />
finish coats.<br />
features Power Plus Technology and is designed for commercial or high<br />
traffic residential applications.<br />
local coffee shops in Colorado. Our<br />
finishes are manufactured and shipped<br />
from our production facility in Würzburg,<br />
PALL-X 96 <strong>Finish</strong><br />
Germany and are stocked locally<br />
throughout our American distribution<br />
network. We combine German<br />
engineering with the technical expertise<br />
of American wood floor craftsmen to<br />
give your floors the protection and<br />
beauty that will last a lifetime.<br />
PALL-X 325 CLEAR<br />
White Oak<br />
PALL-X 96 is a clear finish which allows the natural beauty of the floor to<br />
shine through. It is available in four popular sheens: gloss, semi-gloss,<br />
satin, and matte. VOC compliant and 100% fully cured in 7-10 days allows<br />
you to be back on your floor quicker than when choosing traditional oil<br />
modified polyurethanes.<br />
A single component waterborne hardwood floor finish, PALL-X 96 is<br />
designed for light commercial and residential applications.