Views
2 months ago

CAPITOL TECHNICAL GUIDE v3

INSIDE MOUNT WIDTH

INSIDE MOUNT WIDTH INSIDE MOUNT HEIGHT 34

OUTSIDE MOUNT Face or outside mount L frames, reveal mount L frame and track shutter layouts are all suitable for outside mount. The depth of the reveal is irrelevant for outside mount, however you may still need to consider clearance for door handles or architraves on outside mount track shutters if mounting either side of architraves and hard up against the wall. 1. Measure outside of architrave or desired shutter frame width in at least 3 places (top, centre and bottom) 2. Provide the largest width size as finish size 3. Measure outside of architrave or desired shutter frame height in at least 3 places (left, centre and right) 4. Provide the largest height size as finish size 5. If a divider rail is required, measure from the floor or outside of architrave or chosen shutter frame to the centre of the required divider rail location. Remember rails could vary up to 40mm if not specified critical. 6. If a T post is required, measure from the outside of architrave or chosen shutter frame at left to the centre of the T post location 7. For multiple T posts, measure from outside of architrave or chosen shutter frame at left to the centre of each following post location 8. If corner or bay posts are required, measure the total width of the entire window according to point 3, then measure from outside of architrave at left to the centre of each post location OUTSIDE MOUNT WIDTH 35

WorkEngine v3.x Installation Guide - EPM Live
TECHNICAL GUIDE
CAPITOL CORRIDOR
Capitol Capitol - Minnesota's Private Colleges
2015-additional-needs-guide-v3
Technical Guide - RM.com
Technical Guide - Hyster Company
Waspmote: Technical Guide - Libelium
Racor Products Technical Guide
Technical Guide - Hyster Company
policy-guide-201201-Category-Guide-V3
Capitol Celebrates 80 Years! - Capitol College
Technical DATA Sheet and Guide - TheToolBoxShop.com
Technical Guide - Antietam Velo Club
Brochure / Technical Guide - Hyster Company
Brochure / Technical Guide - Hyster Company
LO5.0T Technical Guide - Hyster Company
Brochure / Technical Guide - Hyster Company
HyPURITY HPLC Technical Guide - Chromatopak
Technical & Parts Guide - Wilwood Engineering
217.V3