Views
3 months ago

GlassCatalogue_LowRes

Surface Protection

Surface Protection Products / Glass Films & Tapes GlasPro Film GlasPro Film is a transparent protection film that can be applied to both the inner and outer surfaces of IG units as well as single glazing, to prevent damage during shipping and handling as well as on the construction site. The film is applied to the glass to ensure that the entire surface of the glass is protected from scratches, dirt, dust, cementitious residue, paint and other construction related damage. Usage GlasPro is available in three grades, GlasPro 3, GlasPro 6 and GlasPro 12. Each GlasPro grade has a limited warranty for UV exposure of 3, 6, and 12 month periods respectively. Please contact our technical department for further information. Please see below table for available roll sizes. GlasPro 3 & 6 GlasPro 12 1225mm x 250lm 1225mm x 500lm 1225mm x 250lm 1500mm x 250lm Features • Polyethylene-based surface protection film • Provides optimum protection for valuable glass surfaces • No harmful chemicals or by-products - can be disposed of with construction waste • Peels off easily when no longer required taking accumulated dirt and debris with it • Aids in the prevention of product rejections and subsequent reworking or scrapping 192 Product Catalogue For Glass Processors & IG Manufacturers

Surface Protection Products / Glass Films & Tapes GlasPro Edge Tape GlasPro Edge Tape is a high mass acrylic tape with transparent fixed liner. The tape provides an edge seal around laminated glass units to prevent moisture contamination which can lead to discolouration and eventual delamination of the glass and interlayer. Usage GlasPro Edge Tape is compatible with glass-to-glass, glass-to-polycarbonate, and other commonly used substrates used in security and architectural applications. It is essential, as with all pressure sensitive tapes, that the surface to which the tape is applied be clean, dry, and free of grease and oil. Bond strength is dependent on the amount of contact area, we recommend a 1mm setback from the edge of the glass. Features • Provides dramatically enhanced moisture and solvent resistance • Increases the resistance to delamination resulting from moisture ingress • Creates an aesthetically pleasing appearance on the laminate edge • Minimises composite layer damage from solvents in sealants and cleaning solutions • Helps protect the edge of glass laminates from chipping and other minor damage Sizes: Standard thicknesses of 0.5mm and 1mm, available in slit rolls from 6mm upwards with a roll length of 33M. Email: info@fgtrading.co.za | Web: www.fgtrading.co.za 193