Views
1 week ago

5100512174-03

t l Installation and

t l Installation and connection 2 Mounting the Vigirex RMH No special tools are required to mount the relay. Simply insert the device straight through the cut-out. Thickness of front panel: 1 mm min. / 3 mm max. The device clips onto the panel. DB124922 Please note: the device may be removed with the door closed. alarme fault 1 2 3 4 5 6 7 8 9 10 11 12 A mA %(I ∆n) A max I alarm t alarm (s) I∆n ∆t (s) Modif Test Reset Mounting the RM12T multiplexer The multiplexer must be mounted on a DIN rail. DB124923 1 2 3 4 5 6 7 8 9 10 11 12 13 RM12T 5100512174-03 Released for Manufacturing Printed on 2013/01/09 41/69

Installation and connection Identification of Vigirex RMH connection terminals DB124924 Vigirex RMH RM12T multiplexer Connector A: "Pre-alarm" and "alarm" relay outputs. Connector B: Connection to the internal bus network. To measurement toroid(s) Connector C: Power supply and voltage presence relay output. Connector D: Connection to the RM12T multiplexer (connection to the toroids). RMH 220-240Va.c. Bus 24V 0V alarm pré-al. 32 34 31 41 44 32 34 31 41 44 21 22 RM12T 24 23 A B RM12T 1 2 3 4 5 6 7 8 9 10 11 12 13 21 22 no wire 24 23 21 22 24 23 11 14 A1 A2 11 on 14 A1 A2 D C 14 15 16 17 18 19 20 21 22 23 24 25 26 To measurement toroid(s) Power To connector D of Vigirex RMH 5100512174-03 Released for Manufacturing Printed on 2013/01/09 42/69

Program_-Guide_2015-03-03
Issue 03
03/2008
ISSUE #03
Minimalistic 03
feineadressen_berlinpotsdam_2015-03
NEWS 03
Classic 03
Fusion 03