Views
1 week ago

GEA Agricultural Equipment and Supplies 2018

Antifreeze Water Bowls

Antifreeze Water Bowls Heatable Float Drinking Bowl SH30 ​ • drinking bowl made from high-quality plastic with integrated heating cable • 222062 and 222063: heating cable (approx. 31 W) for heating the drinking bowl and valve • 222064 and 222065: heating cable (approx. 73 W) for heating the drinking bowl, valve and up to 2 metres of pipeline (auxiliary pipe heating) • integrated frost protection thermostat (switch-on temperature approx. +5 °C, switch-off temperature approx. +13 °C) • heating cable easy to replace • suitable for circulating heating systems • a transformer is required for the 24 V version (not included) • valve cover with snap hook for rapid access • volume: 5 l • water flow rate: approx. 6.5 l/min (2-3 bar) • water connection 1/2“ possible from left or right • with valve type 22182 also suitable for connection to low pressure • with outlet plug for easy cleaning • suitable for wall and pipe mounting • weight: 2.7 kg frost-protected down to about -15 °C The cover on the underside of the bowl prevents the heat given off by the heating cable from escaping. ​ with integrated pipe heating External frost protection thermostat Drain stop 4 variants With auxiliary pipe heating, 73 W Without auxiliary pipe heating, 31 W 24 V 222065 222063 230 V 222064 222062 ref. no. description ​ ​ € 222062 Drinking Bowl SH30 230V, without auxiliary pipe heating 1 42 ​ 222063 Drinking Bowl SH30 24V, without auxiliary pipe heating 1 42 ​ 222064 Drinking Bowl SH30 230V, with auxiliary pipe heating 1 42 ​ 222065 Drinking Bowl SH30 24V, with auxiliary pipe heating 1 42 ​ 222019 Mounting brackets, in pairs 1 - ​ 22192 High pressure replacement float valve 1/50 1,200 ​ 22182 Replacement low pressure float valve 1/100 800 ​ 138

​ Frost-Proof Accessories 24 V Frost-Protection Heating Cable ​ • for heating up the spur pipes of water bowls • IPX7 • a 24 V transformer is required for operation ​ ref. no. description ​ € 22358 1,5 m, 15 w 1/60 ​ 223581 3,0 m, 30 w 1/60 ​ Transformer for Trough Heating ​ • transforms voltage from 230 V to 24 V • suitable for all frost-proof water bowls • short circuit and overload protection thanks to easy-to-replace car fuses in the output current circuit • the transformers are also secured against overheating thanks to an integrated temperature limiter (automatic reset after cool-down) • IP 65 (transformer)/IP 20 (wiring) ref. no. voltage ​ € 222796 100 VA 1 ​ 222797 200 VA 1 ​ 222626 300 VA 1 ​ 222798 400 VA 1 ​ Conventional miniature car fuses for safe operation of the installation Which transformer should be used? If you want to operate a drinking bowl with 80 Watt of power, then a 100 W transformer will suffice (#222796). If you also want to connect a heating cable at 24 V, simply add the current consumption (= wattage) of the cable. Also take into account the power loss through supply lines (see sample calculation). This yields the minimum transformer output. Do not measure the transformer‘s power too precisely in order to have a buffer for extensions. Calculation example transformers: ​ 5 x drinking bowls with current capacity of 100 Watt = 500 Watt 4 x frost-protection heating line 24 V each at 30 Watt = 120 Watt 1 x frost-protection heating line 24 V each at 15 Watt = 15 Watt Total consumer power = 635 Watt Consideration of line losses (flat rate of 15 %) 635 Watt x 1.15 ​ Therefore two transformers with a capacity of 400 Watt each should be chosen. = 730 Watt ​ ​ ​ Antifreeze Thermostat ​ • suitable for all bowl and tube heating systems • outside probe for automatic start and shut off • IP 54 • In splashproof housing • Max. permitted power 3,6 kW Advantages: • the frost protection installation is not switched on if there is no risk of frost • the thermostat automatically switches the frost protection elements off or on • the trigger temperature can be freely selected The frost protection thermostat should be installed at the coldest point. ref. no. ​ € 222794 1/30 ​ GEA 139