Views
8 months ago

GEA Agricultural Equipment and Supplies 2018

LED Tubes

LED Tubes and Moisture-proof Lights LED tubes- the energy-saving alternative to classic T8 fluorescent tubes! The advantages at a glance: • high energy cost savings compared to regular T8 fluorescent lamps • easy retrofit lamp replacement without re-wiring: Only the fluorescent lamp and starter must be replaced by the LED Tube and the supplied LED starter • extremely high service life (> 30,000 h) and switching capacity • full light output even at low temperatures • full, immediate luminosity, no flickering, no humming • uniform and glare-free illumination • high colour reproduction (Ra > 80), suitable for nearly all operating site according to workplace guidelines • sturdy plastic housing without any glass parts • no IF radiation (low thermal output) • no UV radiation (insects are not drawn to it) • mercury-free 4,000 K (neutral white) 6,500 K (daylight white) ​ LED Tube EcoSTAR ​ • only suitable for luminaires with conventional electro-magnetic ballasts (conventional ballasts/ low-loss ballasts). • LED Tubes cannot be dimmed • TÜV approved technical data ​ Input voltage: 220-240 V, 50/60 Hz Colour rendering index CRI: Ra > 80 Light angle (half intensity angle): 140° Chip service life (L70): > 30,000 h Energy efficiency class: A+ Base: G13 Bulb shape: T8 2-year warranty ref. no. description luminous flux​ length ​ ​ € 34544 EcoSTAR 22 Watt, 4,000 K 2.000 lm 150 cm 1/10 480 ​ 34556 EcoSTAR 22 Watt, 6,500 K 2.000 lm 150 cm 1/10 480 ​ 34541 EcoSTAR 18 Watt, 4,000 K 1.600 lm 120 cm 1/10 480 ​ 34557 EcoSTAR 18 Watt, 6,500 K 1.600 lm 120 cm 1/10 480 ​ EcoSTAR Plus LED Tubes ​ • only suitable for lights with conventional electro-magnetic ballast (conventional ballast/low-loss ballast) • the LED tubes cannot be dimmed • TÜV approved 2 years warranty ​technical data ​ Input voltage: 220-240 V, 50/60 Hz Colour rendering index CRI: RA > 80 Light angle (half intensity angle): 140° Chip service life (L70): > 30.000 h Energy efficiency class: A++ Plinth G13 Bulb shape T8 EcoSTAR Plus: Even more efficient, even brighter! • light yield up to 125 Lumen/Watt • 37.5 % more luminous flux compared to EcoSTAR ref. no. description luminous flux length ​ ​ € 34545 EcoSTAR Plus 22 Watt, 4,000 K 2.750 lm 150 cm 1/10 480 ​ 34543 EcoSTAR Plus 22 Watt, 6,500 K 2.750 lm 150 cm 1/10 480 ​ 34542 EcoSTAR Plus 20 Watt, 4,000 K 2.200 lm 120 cm 1/10 480 ​ 34540 EcoSTAR Plus 20 Watt, 6,500 K 2.200 lm 120 cm 1/10 480 ​ 162

Moisture-proof Diffuser Light for LED Tube ​ • housing made from glass fibre reinforced polyester, low inflammability • cover made from acrylic glass (PMMA), transparent, pearled interior, with clip locks • protected against powerful water jets and dust-proof (IP 65 protection class) • with D marking according to DIN EN 60598-2-24, therefore suitable for areas at risk of fires due to combustible dusts or fibres • incl. microfuse • no bridging starter required • only suitable for T8 LED Tubes (Ø 26 mm) • suitable for LED tubes EcoSTAR and EcoSTAR Plus LED Tubes and Moisture-proof Lights Light source not included! ref. no. length ​ ​ € 34561 120 cm 1 120 ​ 34562 150 cm 1 120 ​ D LED Moisture-proof Lamp Perfect for rough conditions in wet, moist or dusty environments! • for lighting stables, riding halls, industrial buildings and warehouses, barns, workshops, etc. • with integrated high-performance LED chips (no fluorescent tubes required) • high energy cost savings compared to regular T8 fluorescent lamps • water-proof and dust-proof (IP 67 protection class), corrosion-protected • with D marking according to DIN EN 60598-2-24, therefore suitable for areas at risk of fires due to combustible dusts or fibres (hay storage, feed, bedding, etc.) • stable, shock-resistant housing made from polycarbonate • uniform and glare-free illumination due to a frosted cover • incl. installation clips made of stainless steel 5-year warranty technical data ​ Luminous efficacy: 120 - 125 lm/W Light angle (half intensity angle): 130° LED type: SMD 2835 Chip service life (L70): > 50.000 Input voltage: 100 - 277 V / 50 - 60 Hz Working temperature: - 40 °C to + 50 °C Colour temperature: 6.000 K Colour rendering (CRI): Ra > 80 Protection type: IP 67 D ref. no. description luminous flux l x w x h ​ € 34546 LED moisture-proof lamp 40 W 5.000 lm 1192 x 72 x 82 mm 1/6 ​ 34547 LED moisture-proof lamp 55 W 6.500 lm 1492 x 72 x 82 mm 1/6 ​ The lights comprise built-in LED bulbs. The bulbs in the light cannot be replaced. GEA 163