Views
4 months ago

GEA Agricultural Equipment and Supplies 2018

Milk Heater FastHeat

Milk Heater FastHeat FastHeat and FastHeat Digital The calf milk heaters of the latest generation... The calf milk heaters of the FastHeat range combine functional design with clear time and energy savings. Energy saving At just 1700 watts, FastHeat calf milk heaters excel with considerably lower energy consumption compared to conventional products. Through its patented product design and the reduced height of the cast aluminium radiator, it is possible to heat up quite low fill levels without any unnecessary energy loss. technical data ​ voltage: 230 V output: 1700 W Protection class: IPX7 weight: 2.7 kg max. heater element diameter: 165 mm min. dip depth: 80 mm max. dip depth: 690 mm max. temperature: 90 °C Quick and even heating FastHeat milk warmers make use of the milk’s (or other medium’s) heat convection in a pretty smart way: the heated milk rises up to the surface while still colder milk drops to the bottom of the bucket where it is heated again. Since the heating element is located at the bottom where the milk is coldest, the heating energy fully effects the heat transmission to the milk. This allows for an efficient and even heating of the milk. From 18 °C to 42 °C in around 11 minutes (bucket holding 8 litres of water). Calf milk heater FastHeat Digital ​ • Digital control with steplessly-selectable temperatures (from +10 °C to max. +90 °C) • stores the last target temperature set • illuminated display • visual and audible signal output, e.g. when the set target temperature is reached • safety cut-out in the event of dry operation • connecting cable holder so that the connecting plug always stays dry • with practical and reliable handle • overall height of the device: 78.5 cm • extremely lightweight - only 2.7 kg (around 25 % lighter than standard products) • easy to clean thanks to PTFE-coated heater element • 3 m connecting cable Milk Heater FastHeat ​ • with tried and tested temperature regulation making it easy to operate with the usual comfort • visual signal output, e.g. when the set target temperature is reached • with practical handle • overall height of the device: 81.5 cm • extremely lightweight - only 2.7 kg (around 25 % lighter than standard products) • easy to clean thanks to PTFE-coated heater element • 3 m connecting cable optimized for feeding bucket with volumes up to 10 liters ref. no. ​ ​ € 14160 1 25 ​ ref. no. ​ ​ € 14150 1 25 ​ Very easy to clean thanks to its patented shape and PTFE coating! 38

​ Milk Heater Milk Heater for Calf Feeding EasyHeat 23A ​ • curved handle allows single-handed use • individually adjustable thermostat • easy to clean thanks to a polished heater made from cast aluminium • extremely stable • high heating power • ready to use at approx. 13 cm fill level • with mounting for connection cable • 3 m connecting cable ​ technical data ​ Voltage: 230 V Output: 2300 W Protection class: IPX7 Weight: 4,7 kg Overall height: 86 cm Heater element diameter: 16 cm Minimum immersion depth: 13 cm Maximum immersion depth: 75 cm maximum temperature: 80 °C ref. no. description ​ € 14170 with earthed plug 1 ​ 14170-CH with Swiss plug 1 ​ KERBL Milk Heater with PTFE-coating and Bow Handle ​ • with practical handle for one or two-handed operation • multi-stage thermostat • extremely stable • powerful heating performance • already operational at a level of 15 cm Advantages of PTFE (polytetrafluoroethylene) coating: • thanks to the dirt-resistant properties of PTFE coating, very easy to clean • absolutely acid-proof • no burning of the heating ring as coating is resistant to high temperatures • 3 m connecting cable ref. no. ​ ​ € 1420 1 25 ​ 1420 1418 Milk Heater with Bow Handle ​ • with practical handle for one or two-handed operation • multi-stage thermostat • extremely stable • powerful heating performance • already operational at a level of 15 cm • 3 m connecting cable ​ ref. no. ​ ​ € 1418 1 25 ​ technical data ​ Power supply: 230 V Output: 2300 W Safety classification: IPX7 Weight: 4,7 kg Height: 815 mm Heater element diameter: 160 mm minimum dip depth: 150 mm maximum dip depth: 690 mm Max. temperature: 80 °C from 18 °C to 42 °C in around 16 minutes (bucket holding 8 litres of water). GEA 39