1 week ago



OPTIONAL EXTRAS The following options are available on the ENCORE aluminium range of shutters and incur an additional cost: FLY SCREENING Aluminium angle is powdercoated to match the shutters and attached to the rear of each panel. Fibreglass flyscreen and spline is then attached before shipping so there is no need to assemble onsite. Tilt rod is assembled at the rear of panels by default however you can opt to attach at the front when using flyscreening. This must be specified at the time of order as a special instruction. FLUSH BOLTS Flush bolts are commonly used to manually lock bifold panels into place in the bottom track and are useful for keeping panels secured at all times on double panel hinged layouts. Single bolts are rebated into the bottom of the stile and are available in silver only. When ordering flush bolts for track bifolds, they will be installed at the factory on every 2 nd panel by default. The bottom track, window sill or door jamb must have holes for the bolt to extend through to pass into the space within to keep the panel secured in the closed position. 65

Technical Manual
Technical Manual -
WINTIX Technical Manual - Ancare
Symposia Technical Manual - Kenes
Plumbers Technical & Installation Manual
Technical Manual -
19 JULY Technical Manual
technical manual - Orvis
Technical Manual - Doccheck
Philmac Valves Technical Manual
Autosport Technical Manual - Deutsch
Technical Manual - Tyrolia
Technical Manual - Tyrolia
Technical Manual "Family of Three"
Technical Manual - ODYSSEY Batteries
technical manual - Orvis
Metric Range Technical Manual