Views
1 week ago

VS_2017

Ignitors and Accessories

Ignitors and Accessories for Discharge Lamps Pulse Ignitors for HS Lamps 50 to 1000 W Standard version For standard high pressure sodium lamps (HS) Max. permitted casing temperature: 95 °C Screw terminals: 0.5–1.5 mm² Fastening: male nipple with pre-assembled washer and nut For luminaires of protection class I Type Ref. No. Voltage AC Number of Ignition Load Programmed Casing Weight 50–60 Hz ignition pulses voltage capacity switch-off time d (Ø) a b c V per mains period kV pF sec. mm mm mm mm g Plastic casing (PC) PZS 1000 K 140613 220–240 approx. 1/sec. approx. 4 20–4000 — — 50 28 27 50 Not suitable for HS lamps types Plus, Super, XL, HO Suitable ballasts (type: NaH...P) are available on request Pulse Ignitors for HI Lamps 250 to 2000 W, Ignition Voltage up to 1 kV Standard version For metal halide lamps (HI) with ignition voltage of 0.9 kV Max. permitted casing temperature: 95 °C Screw terminals: 0.5–2.5 mm² Fastening: male nipple with pre-assembled washer and nut For luminaires of protection class I Type Ref. No. Voltage AC Number of Ignition Load Programmed Casing Weight 50–60 Hz ignition pulses voltage capacity switch-off time a b c V per mains period kV pF sec. mm mm mm g Plastic casing (PC) PZI 1000/1 K 140617 220–240 ≥ 1 0.7–0.9 max. 10000 — 57 28 27 50 Suitable ballasts see page 31, 32 and 33 52

Ignitors and Accessories for Discharge Lamps Instant Restrike Ignitors for High-pressure Discharge Lamps up to 600 W For high pressure sodium lamps (HS), metal halide lamps (HI), ceramic discharge lamps (C-HI) and projection lamps in accordance with the lamp table shown below For installation as a symmetric ignition device (whereby the ignition voltage is split equally over both lamp electrodes) For installation in luminaires of protection class I Max. permitted ambient temperature t a: 60 °C Mains connection: screw terminal 3-poles, 0.75–2.5 mm² Lamp connection: screw terminal 0.75–2.5 mm² for circuit 1 and 2 Fastening: 2 mounting slots for screws M4 Material: plastic casing made of ABS CAUTION Defective lamps must be replaced immediately Circuit 1 Circuit 2 1 2 3 4 5 Type Ref. No. Voltage AC Max. Internal Inherent Ignition Ignition Load Casing Weight 50–60 Hz lamp current loss heating voltage* time capacity a b c V A W K kV sec. pF mm mm mm g HZ 600 K 147790 230 ±10% 8 < 4 < 10 20–30 approx. 6 5–30 247 66 47 1000 * Depending on the respective circuit; the ignition voltage is split equally over both lamp electrodes Lamp table Circuit 1 Circuit 2 Lamp type Base VS lampholder type Catalogue page Lamp type Base VS lampholder type CDM-TD 70 W RX7s 306 77 HBO 50 W SFa8-2 — HCI-TS 70 W RX7s 306 77 MSR 125 HR GZX9.5 — HI 70 W (DE) RX7s 306 77 HBO 200 W SFc10-4 — HS 70 W (DE) RX7s 306 77 HBO 200 W SFc10-4 — RCI-TS 70 W RX7s 306 77 MSR 200 HR GZX9.5 — HS 150 W (DE) RX7s 306 77 HTI 250 W FaX1.5 — HMI 200 W X515 — HMI 400 W/SE GZZ9.5 — HMI 200 W/X GZY9.5 — HMP 400 W FaX1.5 — MSI 200 W GZY9.5 — HTI 400 W FaX1.5 — RSI 200 W X515 — RSI 400 W GZX9.5 — HS 250 W (DE) Fc2 025 77–78 HBO 500 W SFcY13-5 — HS 400 W (DE) Fc2 025 77–78 HMP 575 W SFc10-4 / G22 — MSR 400 HR GZZ9.5 — HMI 575 W SFc10-4 — MSI 575 W SFc10 — RSI 575 W G22 — MSR 575 HR G22 — HTI 600 W FaX1.5 — 6 7 8 9 10 53

  • Page 1 and 2: Component Systems for Lighting Appl
  • Page 3 and 4: Contents 5 Transformers for Low-vol
  • Page 5 and 6: 1 PUMA Headquarters Porsche Museum
  • Page 7 and 8: 2 Ballasts for Discharge Lamps For
  • Page 9 and 10: Ballasts for Discharge Lamps Electr
  • Page 11 and 12: Ballasts for Discharge Lamps Cord G
  • Page 13 and 14: Ballasts for Discharge Lamps Contro
  • Page 15 and 16: Ballasts for Discharge Lamps Contro
  • Page 17 and 18: Ballasts for Discharge Lamps Ballas
  • Page 19 and 20: Ballasts for Discharge Lamps Compac
  • Page 21 and 22: Ballasts for Discharge Lamps Standa
  • Page 23 and 24: Ballasts for Discharge Lamps Ballas
  • Page 25 and 26: Ballasts for Discharge Lamps Ballas
  • Page 27 and 28: Ballasts for Discharge Lamps Ballas
  • Page 29 and 30: Ballasts for Discharge Lamps Ballas
  • Page 31 and 32: Ballasts for Discharge Lamps Ballas
  • Page 33 and 34: Ballasts for Discharge Lamps Ballas
  • Page 35 and 36: Ballasts for Discharge Lamps Compac
  • Page 37 and 38: Ballasts for Discharge Lamps Ballas
  • Page 39 and 40: Ballasts for Discharge Lamps Ballas
  • Page 41 and 42: 2 Ignitors and Accessories for Disc
  • Page 43 and 44: Ignitors and Accessories for Discha
  • Page 45 and 46: Ignitors and Accessories for Discha
  • Page 47 and 48: Ignitors and Accessories for Discha
  • Page 49 and 50: Ignitors and Accessories for Discha
  • Page 51: Ignitors and Accessories for Discha
  • Page 55 and 56: Ignitors and Accessories for Discha
  • Page 57 and 58: Ignitors and Accessories for Discha
  • Page 59 and 60: Ignitors and Accessories for Discha
  • Page 61 and 62: Ignitors and Accessories for Discha
  • Page 63 and 64: 2 Lampholders for Discharge Lamps E
  • Page 65 and 66: Lampholders for Discharge Lamps E27
  • Page 67 and 68: Lampholders for Discharge Lamps E40
  • Page 69 and 70: Lampholders Fassungen für for Entl
  • Page 71 and 72: Lampholders for Discharge Lamps GY9
  • Page 73 and 74: Lampholders for Discharge Lamps Par
  • Page 75 and 76: Lampholders for Discharge Lamps RX7
  • Page 77 and 78: Lampholders for Discharge Lamps K12
  • Page 79 and 80: Technical Details - Components for
  • Page 81 and 82: Technical Details - Components for
  • Page 83 and 84: Technical Details - Components for
  • Page 85 and 86: Technical Details - Components for
  • Page 87 and 88: Technical Details - Components for
  • Page 89 and 90: Technical Details - Components for
  • Page 91 and 92: Technical Details - Components for
  • Page 93 and 94: Technical Details - Components for
  • Page 95 and 96: Technical Details - Components for
  • Page 97 and 98: Technical Details - Components for
  • Page 99 and 100: Technical Details - Components for
  • Page 101 and 102: Technical Details - Components for
  • Page 103 and 104:

    Technical Details - Components for

  • Page 105 and 106:

    Technical Details - Components for

  • Page 107 and 108:

    Technical Details - Components for

  • Page 109 and 110:

    Technical Details - Components for

  • Page 111 and 112:

    Technical Details - Components for

  • Page 113 and 114:

    Technical Details - Components for

  • Page 115 and 116:

    Technical Details - Components for

  • Page 117 and 118:

    Technical Details - Components for

  • Page 119 and 120:

    Technical Details - Components for

  • Page 121 and 122:

    3 Electronic Ballasts for TC and T

  • Page 123 and 124:

    Electronic Ballasts for TC and T La

  • Page 125 and 126:

    Electronic Ballasts for TC and T La

  • Page 127 and 128:

    Electronic Ballasts for TC and T La

  • Page 129 and 130:

    Electronic Ballasts for TC and T La

  • Page 131 and 132:

    Electronic Ballasts for TC and T La

  • Page 133 and 134:

    Electronic Ballasts for TC and T La

  • Page 135 and 136:

    Electronic Ballasts for TC and T La

  • Page 137 and 138:

    Electronic Ballasts for TC and T La

  • Page 139 and 140:

    Electronic Ballasts for TC and T La

  • Page 141 and 142:

    Electronic Ballasts for TC and T La

  • Page 143 and 144:

    Electronic Ballasts for TC and T La

  • Page 145 and 146:

    Electronic Ballasts for TC and T La

  • Page 147 and 148:

    3 Electromagnetic Ballasts for TC a

  • Page 149 and 150:

    Electromagnetic Ballasts for TC and

  • Page 151 and 152:

    Electromagnetic Ballasts for TC and

  • Page 153 and 154:

    Electromagnetic Ballasts for TC and

  • Page 155 and 156:

    Electromagnetic Ballasts for TC and

  • Page 157 and 158:

    3 Lampholders and Accessories for T

  • Page 159 and 160:

    Lampholders and Accessories for TC

  • Page 161 and 162:

    Lampholders and Accessories for TC

  • Page 163 and 164:

    Lampholders and Accessories for TC

  • Page 165 and 166:

    Lampholders and Accessories for TC

  • Page 167 and 168:

    Lampholders and Accessories for TC

  • Page 169 and 170:

    Lampholders and Accessories for TC

  • Page 171 and 172:

    Lampholders and Accessories for TC

  • Page 173 and 174:

    3 Lampholders and Accessories for T

  • Page 175 and 176:

    Lampholders and Accessories for T L

  • Page 177 and 178:

    Lampholders and Accessories for T L

  • Page 179 and 180:

    Lampholders and Accessories for T L

  • Page 181 and 182:

    Lampholders and Accessories for T L

  • Page 183 and 184:

    Lampholders and Accessories for T L

  • Page 185 and 186:

    Lampholders and Accessories for T L

  • Page 187 and 188:

    Lampholders and Accessories for T L

  • Page 189 and 190:

    Lampholders and Accessories for T L

  • Page 191 and 192:

    Lampholders and Accessories for T L

  • Page 193 and 194:

    Lampholders and Accessories for T L

  • Page 195 and 196:

    Lampholders and Accessories for T L

  • Page 197 and 198:

    Lampholders and Accessories for T L

  • Page 199 and 200:

    3 Starter Holders and Terminal Bloc

  • Page 201 and 202:

    Starter Holders and Terminal Blocks

  • Page 203 and 204:

    Starter Holders and Terminal Blocks

  • Page 205 and 206:

    Starter Holders and Terminal Blocks

  • Page 207 and 208:

    Starter Holders and Terminal Blocks

  • Page 209 and 210:

    Technical Details - Components for

  • Page 211 and 212:

    Technical Details - Components for

  • Page 213 and 214:

    Technical Details - Components for

  • Page 215 and 216:

    Technical Details - Components for

  • Page 217 and 218:

    Technical Details - Components for

  • Page 219 and 220:

    Technical Details - Components for

  • Page 221 and 222:

    Technical Details - Components for

  • Page 223 and 224:

    Technical Details - Components for

  • Page 225 and 226:

    Technical Details - Components for

  • Page 227 and 228:

    Technical Details - Components for

  • Page 229 and 230:

    Technical Details - Components for

  • Page 231 and 232:

    Technical Details - Components for

  • Page 233 and 234:

    Technical Details - Components for

  • Page 235 and 236:

    Technical Details - Components for

  • Page 237 and 238:

    4 Parallel Capacitors Parallel capa

  • Page 239 and 240:

    Parallel Capacitors Parallel Connec

  • Page 241 and 242:

    Parallel Capacitors Parallel Connec

  • Page 243 and 244:

    Technical Details - Capacitors for

  • Page 245 and 246:

    Technical Details - Capacitors for

  • Page 247 and 248:

    Technical Details - Capacitors for

  • Page 249 and 250:

    Technical Details - Capacitors for

  • Page 251 and 252:

    Technical Details - Capacitors for

  • Page 253 and 254:

    5 Transformers for Low-voltage Halo

  • Page 255 and 256:

    Transformers for Low-voltage Haloge

  • Page 257 and 258:

    Transformers for Low-voltage Haloge

  • Page 259 and 260:

    5 Lampholders for Halogen Incandesc

  • Page 261 and 262:

    Lampholders for Halogen Incandescen

  • Page 263 and 264:

    Lampholders for Halogen Incandescen

  • Page 265 and 266:

    Lampholders for Halogen Incandescen

  • Page 267 and 268:

    Lampholders for Halogen Incandescen

  • Page 269 and 270:

    Lampholders for Halogen Incandescen

  • Page 271 and 272:

    Lampholders for Halogen Incandescen

  • Page 273 and 274:

    Lampholders for Halogen Incandescen

  • Page 275 and 276:

    Lampholders for Halogen Incandescen

  • Page 277 and 278:

    Lampholders for Halogen Incandescen

  • Page 279 and 280:

    5 Lampholders for General-service I

  • Page 281 and 282:

    Lampholders for General-service Inc

  • Page 283 and 284:

    Lampholders for General-service Inc

  • Page 285 and 286:

    Lampholders for General-service Inc

  • Page 287 and 288:

    Lampholders for General-service Inc

  • Page 289 and 290:

    Lampholders for General-service Inc

  • Page 291 and 292:

    Lampholders for General-service Inc

  • Page 293 and 294:

    Lampholders for General-service Inc

  • Page 295 and 296:

    Lampholders for General-service Inc

  • Page 297 and 298:

    Lampholders for General-service Inc

  • Page 299 and 300:

    Lampholders for General-service Inc

  • Page 301 and 302:

    Lampholders for General-service Inc

  • Page 303 and 304:

    Lampholders for General-service Inc

  • Page 305 and 306:

    Lampholders for General-service Inc

  • Page 307 and 308:

    Lampholders for General-service Inc

  • Page 309 and 310:

    Lampholders for General-service Inc

  • Page 311 and 312:

    Lampholders for General-service Inc

  • Page 313 and 314:

    Lampholders for General-service Inc

  • Page 315 and 316:

    Technical Details - Components for

  • Page 317 and 318:

    Technical Details - Components for

  • Page 319 and 320:

    Technical Details - Components for

  • Page 321 and 322:

    Technical Details - Components for

  • Page 323 and 324:

    Technical Details - Components for

  • Page 325 and 326:

    Technical Details - Components for

  • Page 327 and 328:

    Technical Details - Components for

  • Page 329 and 330:

    6 Emergency Lighting Modules for TC

  • Page 331 and 332:

    Emergency Lighting Modules for TC a

  • Page 333 and 334:

    Technical Details - Emergency Light

  • Page 335 and 336:

    Technical Details - Emergency Light

  • Page 337 and 338:

    Technical Details - Emergency Light

  • Page 339 and 340:

    Technical Details - Emergency Light

  • Page 341 and 342:

    1 2 3 4 5 Energy Management & Contr

  • Page 343 and 344:

    Components for the UL Market GX10 L

  • Page 345 and 346:

    Components for the UL Market G13 Pu

  • Page 347 and 348:

    Components for the UL Market 1 2 3

  • Page 349 and 350:

    General Technical Details Product d

  • Page 351 and 352:

    General Technical Details The follo

  • Page 353 and 354:

    General Technical Details Protectio

  • Page 355 and 356:

    General Technical Details Protectio

  • Page 357 and 358:

    Glossary A A type, B type capacitor

  • Page 359 and 360:

    Glossary R Reference ballast Specia

  • Page 361 and 362:

    Reference Numbers Ref. No. Type Pag

  • Page 363 and 364:

    Reference Numbers Ref. No. Type Pag

  • Page 365 and 366:

    Reference Numbers Ref. No. Type Pag

  • Page 367 and 368:

    Reference Numbers Ref. No. Type Pag

  • Page 369 and 370:

    Reference Numbers Ref. No. Type Pag

  • Page 371 and 372:

    Reference Numbers Ref. No. Type Pag

  • Page 373 and 374:

    Subsidiaries Subsidiaries Adress Ph