Canadean's Consumer and Market Insights report on the Dairy and Soy Food market in Bulgaria provides insights on high growth categories to target, trends in the usage of packaging materials, types and closures category level distribution data and brands market shares.
Food grade lubricants refer to lubricants that are used to maintain the food processing machinery, i.e. it protects the tools and machines from wear and tear. However, since many of them come into direct contact with food, these lubricants used in these machineries need to be different from the usual machine lubricants. In other words, they should not render the food unfit for consumption. With recent advances in the food processing industry, there is now much variety in the machinery used to process each food/beverage category. With growing concern over the food we eat, food processors need to comply with various regulatory frameworks like the Hazard Analysis & Critical Control Points (HACCP). The standards vary from country to country. However, these are internationally accepted standards which are followed by food grade lubricant manufacturers. For instance, the non-profit public health and safety company, NSF International, along with USDA, has set standards for various food grade lubricants.
These days, food safety is the highest priority for the food processors, and they take utmost care to maintain the same. H1 and H2 are the two most common broad spectrum food grade lubricants that are used in machinery involving incidental food contact and no food contact respectively. However, with the drive to produce innovative products in the food processing industry, the demand for customised and high performance food grade lubricants is expected to swell in near future. Food grade lubricants range from hydraulic fluids, oven chain oils, gear oils, compressor oils and vacuum pump oils to specialty lubricants such as can seamer oil. Different processes require different grades of oil. For instance, H3 (soluble oil) is used to prevent rust on trolleys, hooks and similar equipment whereas 3H release agents are used on chopping boards, cutters, grills, loaf pans, boning benches and other such hard surfaces.
Request Free Report Sample@ http://www.futuremarketinsights.com/reports/sample/rep-gb-98
http://www.qyresearchglobal.com/goods-829409.html According to QYResearch, The Latin America sales market for Wet Pet Food is expected to reach about 171.5 MT by 2022 from 131.3 MT in 2017, registering a compounded annual growth rate (CAGR) of 5.5% during the analysis period, 2017-2022.