extended embed settings
cp-61/62:bluetooth sensors 12-11-2013 ios app pairing make sure bluetooth is turned on If pairing fails: -Make sure the battery is not depleted. -Make sure the belt contact areas are properly wet. -Make sure the sensor is not upside down. -Try unclipping and reclipping the sensor from the belt -Pull out the battery for 30 seconds. Tap “Bluetooth” Turn on the toggle Make sure the Bluetooth icon is visible wahoo fitness Tap the gear icon to go into the settings menu © BBB CYCLING Rooseveltstraat 46, 2321BM Leiden, The Netherlands Tap “Heart Rate” It should automatically be searching Once paired, the screen should look like this. Go back to Home. The main screen should show If pairing fails, try unclipping your sensor a 1 at top left corner and re-clip it on the belt, this will “re-activate” the sensor Start a new workout! BBB has no responsibility for misprints or changed technical content.
Magazine: BBB Cycling_Tutorial_iOS app pairing