Basic Troubleshooting Tips for HP Scanjet Enterprise 7000 s2
Some technical errors like loose cables or blurs on the scanning strips can cause your HP scanner device
to give vague scans and operate in a surprising manner or fail to operate. Always check properly
following items when you face scanning issues.
If scans are unclear, check properly to see if the scanning strips inside the document feeder are
opaque or smudged. If so, you should clean the scanning strips. If you are scanning a document
which will be examined with help of OCR, Optical Character Recognition and confirm that the
original document is clearly adequate to be examined.
Confirm that USB and power cables are firmly placed in their respective connectors on the back
of the scanner and the power cord is connected into a working electrical outlet. If you have any
difficulty regarding this step, you can call online HP Scanner Tech Support team to get right
technical advice immediately.
Confirm that the scanner has not powered off automatically. If this has, press the Power option
to turn on the scanner.
Confirm that the scanner is getting the power:-
Make sure that the green LEC on the power supply is ON.
If Green LED is not on, confirm that power is available to a power outlet that the power
supply is plugged into.
It has been seen that if power is available to a power outlet but the green LED is still not
on, the power supply might be faulty.
If you get a scanner not found the error message, then try to scan the scanner, you have to turn
off the scanner and wait for thirty seconds and turn on the HP scanner. Still, if you get this
message, requiring resetting the scanner.
If you have connected your scanner to the computer system via USB port or USB hub in front of
the computer system and disconnect the scanning machine and then reconnect it to a USB port
on the back of the computer system.
Confirm that the scanner buttons are supported.
You have to turn off the scanner and wait for 30 seconds and then turn on the scanner.
Confirm that the document feeder hatch is closed.
Finally, you should restart the computer system. Still, if you are experiencing HP Scanjet
Enterprise 7000 s2, you should call at HP Scanner Technical Support Number 1-855-461-5433 to
get immediate solutions from scanner experts.