Stark & Greensmith Installation Guide

cedarnursery

Standard Fence Installation

Guide


Standard Fence Installation

Guide

1. Drill 3 5mm holes into each post at the

intervals shown:

- 125mm from the top of the post

- 905mm from the top of the post

- 1685mm from the top of the post

These are for the clamps.


Standard Fence Installation

Guide

2. Set posts 500mm into the

ground, using Postcrete or similar.

1230mm


Standard Fence Installation

Guide

3. Remove the backs of

the clamps using an allen

key.

Fix the front of the

clamps to the posts using

a self tapping M6 Screw

(supplied).


Standard Fence Installation

Guide

4. Fix the panel into place

110mm above ground level,

ensuring it is horizontal. Once in

place, fix the back of clamps,

securing the panel.

5. Using an adhesive such as

super glue, fix the end caps to

the top of the post, ensuring it is

water tight.


Standard Fence Installation

Guide

6. If fixing via feet, trim 500mm

off of post length.

Fix feet to appropriate surface

using M10 bolts (not supplied),

and sleeve post over foot.

1230mm

For decking: Please consult your

decking installer and ensure you

fix to frame substrate below

More magazines by this user
Similar magazines