WORLD OF INDUSTRIES 06/2018 (RU)
WORLD OF INDUSTRIES 06/2018 (RU)
WORLD OF INDUSTRIES 06/2018 (RU)
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Differential pressure transmitter<br />
with railway certification<br />
The JUMO MIDAS DP10 differential pressure transmitter with<br />
a silicon sensor is used to detect the differential pressure in<br />
fluid and gaseous as well as low-aggressive media. The<br />
measurement range covers 0 to 40 mbar up to 0 to 16 bar<br />
differential pressure. The highly vibration-resistant differential<br />
pressure transmitter has been certified for use in the<br />
railway industry in accordance with the latest versions of the<br />
standards under DIN EN 50155, DIN EN 50121, and DIN EN<br />
45545. Within the railway industry the JUMO MIDAS DP10<br />
can be used in areas such as pressure monitoring for brake<br />
circuits or level measurement in service water, wastewater,<br />
and quench water tanks. JUMO MIDAS DP10 is also suitable<br />
for monitoring differential pressure to measure current in<br />
ventilation systems or for controlling the degree of contamination<br />
in filters.<br />
Sensor monitors filtration systems<br />
in wind turbines<br />
Efficient use of wind turbines requires full<br />
condition monitoring. This is where<br />
keeping hydraulic fluids and lubricants<br />
clean with qualified filtration systems is<br />
key. The filters not only remove the solids<br />
which increase wear but at the same time<br />
also serve as a sensor, since in a tribological<br />
sense these particles are nothing than<br />
the result of the system-related ‘wear<br />
margin’. So in mechanical systems the<br />
filters ‘measure’ the inevitable wear of<br />
friction partners.<br />
Since depending on the conditions in and under which the<br />
parts are used, this process is not necessarily even and in can<br />
even spike greatly due to spontaneous incidents, the filters<br />
require continuous monitoring. Bühler Technologies<br />
presents a new sensor for this challenging monitoring task.<br />
www.buehler-technologies.com<br />
www.jumo.net<br />
Compact, flexible and easy to install<br />
bearingless encoders are trending in<br />
elevator technology<br />
The use of non-contact magnetic measuring systems like the<br />
bearing-less encoders is a rising trend in the elevator<br />
technology. The bearingless measuring systems are especially<br />
suitable for external rotor motors. Kübler, one of the leading<br />
specialists in the field of position and motion sensors offers<br />
such measuring systems, made of an incremental sensor and<br />
a magnetic ring. This measuring system offers clear<br />
advantages: high resolution, reduced space requirements,<br />
suitable for narrow mounting spaces, flexible and easy to<br />
install. With its compact installation depth of only 10 mm, the<br />
Limes LI50 with magnetic ring can be installed quickly and<br />
easily in tightest mounting spaces. Oblong holes ensure easy<br />
adjusting of the measuring system. A wide mounting<br />
tolerance between the sensor head and the magnetic ring<br />
ensures trouble-free installation. Just like its encoders, the<br />
bearingless measuring system is particularly robust and<br />
reliable.<br />
www.kuebler.com<br />
Tel.: Tel.: +49 (0)4743/2769 27690 · · www.astro-motoren.de<br />
Zu Land, On land, im Wasser, at sea, under unterwater, Wasser, in in theder airLuft andund in space im Weltall -<br />
Small Elektrokleinmotoren electric motors according bis 200 Watt to customer nach Kundenwunsch requirements.<br />
2017<br />
ASTRO Motoren GmbH & Co. KG<br />
Debstedt · · Große Beek Beek 7 · 727607 · D-27607 Geestland Geestland · Germany<br />
Tel.: (0)47 +49 43 (0)/ 4743 27 69 · 27690 · astro@astro-motoren.de<br />
www.astro-motoren.de<br />
<strong>WORLD</strong> <strong>OF</strong> <strong>INDUSTRIES</strong> <strong>2018</strong> 29<br />
ASTRO.indd 1 08.02.<strong>2018</strong> 10:35:55