MS AR 2018 (1)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PRODUCT PORTFOLIO<br />
The Company’s product range comprises of the following<br />
products:<br />
Steel re-bars (G60 / Mughal Supreme)<br />
Steel bars are used as a tension device in reinforced<br />
concrete structures to strengthen and hold the concrete in<br />
tension. Rebar’s surface is often patterned to form a better<br />
bond with the concrete. The steel bar is used both in building<br />
infrastructural projects and residential ventures.<br />
Girders<br />
I-beams are usually made of structural steel and are used<br />
in construction and civil engineering. I-beams may be<br />
used both on their own, or acting compositely with another<br />
material, typically concrete. The horizontal elements of the<br />
“I” are known as flanges, while the vertical element is termed<br />
the “web”. The web resists shear forces, while the flanges<br />
resist most of the bending moment experienced by the<br />
beam. Beam theory shows that the I-shaped section is a<br />
very efficient form for carrying both bending and shear loads<br />
in the plane of the web.<br />
T-iron<br />
T- iron used in construction is a load–bearing structure of<br />
reinforced concrete, wood or metal, with T-shaped cross<br />
section. The top of the T-shaped cross section serves as<br />
a flange or compression member resisting compressive<br />
stresses. The web (vertical section) of the beam below the<br />
compression flange serves to resist shear stress and to<br />
provide greater separation for the coupled forces of bending.<br />
PROCEDURES ADOPTED FOR<br />
QUALITY ASSURANCE OF<br />
PRODUCTS<br />
We believe in providing the highest quality and best value<br />
for money products. The Company has implemented an<br />
extensive and effective quality assurance system for its<br />
products. The Company is ISO-9001:2015 certified and truly<br />
implements Quality Management System. The Company<br />
manufactures mild steel products based on state of the<br />
art technology. The quality of all products is ensured at<br />
all stages of the steel making process through systematic<br />
and effective adoption, implementation, monitoring and<br />
continuous enhancement of quality control systems using<br />
latest methods of analysis. All stages of the production<br />
process right from the selection of raw materials, processing<br />
of materials and the finished product are subjected to<br />
rigorous testing, to ensure that each item is of the highest<br />
quality. Invariable standard compliance could not have been<br />
possible without an unmatched source of reliability and<br />
particularly quality control trained personnel. Our Laboratory<br />
is equipped with traditional chemical and mechanical<br />
analytical machines besides the world’s renowned Optical<br />
Emission Spectrometer of M8 series. During the year as well<br />
the Company has installed Spectro lab for its girder mill for<br />
conducting chemical testing.<br />
Annual Report <strong>2018</strong><br />
09