350 Machine 6 Pack Rings Applicator

350 Machine Applicator
The 350 machine applicator uses proven rotational innovation to free up a
person from applying the carrier, meeting the requirements of entry speed
canning tasks. it's designed to be adaptable to adapt to line changes,
including conveyor height and package direction. The machine can without
much of a stretch change between various pack products, and different can
sizes. As with cans compared to bottles, the recyclable carrier it applies
utilize less material, resulting it uses less energy, less water, and bringing
about less waste. The ring carriers are also photodegradable to protect
Environment or wildlife.

At up to 60 cans-per-minute
the 350 machine meets the
requirements of entry speed
canning lines on up to
intermediate tasks. As the
cans enter the 350 machine
they will either take a right 90
degree or left 90 degree
discharge. The 350 Machine
will not disappoint you.
Speed and Flexibility

No Air or Water Required
The Mumm 350 machine operates
on a simple grounded 3-pronged
wall plug of 110v. The machine
requires a standard 110 v non-GFI
wall outlet. The machine does not
use pneumatics.
Voltage: 110-120 (VAC), Service
amps: 12 @ 110 (VAC).
Note: It must be plugged into a
Non-GFCI outlet.

Both 12oz and 16oz Capabilities
Can size change-over is a very
quick time of 10 minute operation.
The Length-54”, Width- 35”, Height-
71” at 36” conveyor height but its
adjustable.
It's around 3,500 six pack ring in
carriers.
Typically 8-10 weeks from receipt
of deposit depending on existing
build schedule.

The 350 Machine compact reels
contains 3500 six pack rings so
you will be running for extended
periods before reloading. At a
speed of 60 cans per minute
you have to change reels in
every 5.5 hours. That saves
time, cost and labor.
This is one of the most
environmental friendly way to
recycle your rings.
Long Reload Cycle

Mumm Craft Products
1155 Timber Drive Elgin, IL, USA
Contact us to buy 6 pack ring machine
(800) 446-7225