Mitchell-Golf-Catalog.pdf
SKIP COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS SKIP MITCHELLGOLF.COM : 800-437-1314 : INTERACTIVE PDF CATALOG : February 2023 RESULTS SPEAK FOR THEMSELVES Owned By More Club Fitters, PGA/LPGA Professionals, Tour Vans, Colleges, Hobbyists & Retailers Than Any Other Bending Machine.
- Page 2 and 3: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 4 and 5: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 6 and 7: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 8 and 9: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 10 and 11: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 12 and 13: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 14 and 15: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 16 and 17: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 18 and 19: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 20 and 21: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 22 and 23: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 24 and 25: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 26 and 27: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 28 and 29: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 30 and 31: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 32 and 33: SKIP COVER INFO FREQUENCY ANGLE MAC
- Page 34 and 35: SKIP COVER INFO FREQUENCY ANGLE MAC
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
MITCHELLGOLF.COM : 800-437-1314 : INTERACTIVE PDF CATALOG : February 2023<br />
RESULTS<br />
SPEAK FOR THEMSELVES<br />
Owned By More Club Fitters, PGA/LPGA<br />
Professionals, Tour Vans, Colleges, Hobbyists &<br />
Retailers Than Any Other Bending Machine.
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
<strong>Mitchell</strong> <strong>Golf</strong><br />
Interactive<br />
PDF <strong>Catalog</strong><br />
Introduction of our Interactive PDF<br />
<strong>Catalog</strong> was a big success in 2015. It<br />
has received accolades from many of<br />
our customers claiming it’s easier to use<br />
than a printed version.<br />
Address: 1001 Industral Blvd, Albion, MI 49224 Fax: (937) 436-1325<br />
Email: info@mitchellgolf.com<br />
Phone: 800-437-1314<br />
Website: www.mitchellgolf.com<br />
Hours: Monday thru Friday: 8am - 5pm (ET)<br />
Payment Terms:<br />
MasterCard, VISA, Discover, American Express,<br />
Check-By-Phone, Check in Advance, Wire Transfer<br />
in Advance. No C.O.D Orders or Letters of Credit.<br />
Order Online: Secure, easy and fast ordering. Complete catalog online at www.mitchellgolf.com.<br />
Prices: Items are subject to change without notice.<br />
Damaged Goods: If any item arrives damaged, you must notify the carrier immediately to initiate a claim. Save<br />
the damaged package for inspection. Notify <strong>Mitchell</strong>® <strong>Golf</strong> Equipment Company immediately.<br />
Each catalog page has product feature<br />
information, pricing and a link to our<br />
secure website. It makes shopping more<br />
convenient in our new digital world.<br />
With our easy navigation by product<br />
category and the interactive link, it is real<br />
simple to shop the catalog for specific<br />
items, then click the link to our website<br />
page to make the purchase.<br />
We have the ability to update our catalog,<br />
as needed keeping you current with product<br />
information and pricing, plus specials and<br />
discounts.<br />
Returns: 30 Days 100% Satisfaction Return Policy. Items must be returned in original packaging. Return<br />
products will not be accepted without prior authorization. Call for R.A. Number.<br />
Guarantee: All products manufactured by <strong>Mitchell</strong>® <strong>Golf</strong> Equipment Company are guaranteed against<br />
material defects and workmanship. Replacement or repair will be at the discretion of <strong>Mitchell</strong>® <strong>Golf</strong><br />
Equipment Company. Customer is responsible for all shipping fees. Warranty of other products based on<br />
policy of the manufacturer.<br />
Shipments: UPS Ground, US Mail, or Motor Freight unless otherwise requested. F.O.B. Dayton, Ohio. Shipping,<br />
Handling and Insurance Fees are extra.<br />
Next Day Air, 2-Day Air, 3-Day Select & Ground Service Available.<br />
We’re Here To Help<br />
Grow Your Business<br />
Call Us: 800-437-1314<br />
Invest In Quality Products<br />
Made In The USA.<br />
Our newest revision will be emailed each<br />
time it’s published. Please save it to your<br />
desktop for easy access.<br />
Enjoy Using Our<br />
2019 Interactive<br />
PDF <strong>Catalog</strong><br />
1 Day<br />
2 Day<br />
3 Day<br />
4 Day<br />
5 Day<br />
UPS GROUND: Guaranteed Day-Definite Delivery for Commercial Shipments.
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Frequency<br />
1<br />
Why Frequency?<br />
Visit: mitchellgolf.com/why-frequency<br />
DigiFlex 2.0 Frequency<br />
Meter w/ Portable<br />
Base Plate<br />
$899.99<br />
#DFMS-10000<br />
Battery Pack<br />
For DigiFlex<br />
Frequency Meter<br />
$22.99<br />
#DFM-BP<br />
Includes (2)<br />
9 Volt Batteries<br />
16” x 48”<br />
Frequency Board<br />
Features Club Length<br />
Measuring Scale<br />
50 Sheet<br />
Pad<br />
» Adjustable Quick Clamping Vise<br />
» Interchangeable Aluminum Grip & Shaft Clamps<br />
» 205 Gram Shaft Weight<br />
» Digital Meter With Transformer<br />
» Frequency Charts<br />
» Online PDF Manual<br />
» <strong>Golf</strong> Club Not Included<br />
Digiflex<br />
Frequency Charts<br />
$5.49<br />
#DFM-FC<br />
Transformer Adapters<br />
For All Countries<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Frequency<br />
2<br />
Destaco Clamp #604<br />
Destaco Clamp for DigiFlex<br />
Frequency Meter vise<br />
Transformer<br />
$29.99<br />
#TRANSFORMER<br />
$45.99<br />
#DESTACO#604<br />
» Locks in Both Extended and Retracted Position<br />
» Ergonomic Handle Grip<br />
» Stainless Steel<br />
Transformer comes with<br />
adapters for USA and<br />
EURO.<br />
For use with DigiFlex Frequency Meter<br />
and TourGauge Digital Machines.<br />
Shaft Tip Weights<br />
Clamps For Rifle Gradient<br />
Replacement Clamps<br />
205 Gram Weight<br />
255 Gram Weight<br />
3.5” Grip Clamp<br />
2.5” Shaft Clamp<br />
5” Grip Clamp<br />
5” Shaft Clamp<br />
$36.99<br />
#DFM-205W<br />
$36.99<br />
#DFM-255W<br />
$66.49<br />
#DFM3.5GC<br />
$66.49<br />
#DFM2.5SC<br />
$66.49<br />
#DFM5GC<br />
$66.49<br />
#DFM5SC<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Angle Machines : Putter Bending<br />
3<br />
Analog<br />
Complete System<br />
Digital<br />
Complete System<br />
w/ Floor Stand<br />
$1899.99<br />
#TGPM-FMS<br />
w/ Floor Stand<br />
$2099.99<br />
#TGDPM-FMS<br />
PATENTED<br />
#TGPM-FMS<br />
w/ Portable Stand<br />
$2017.99<br />
#TGPM-PMS<br />
w/ Bench Mount<br />
$1749.99<br />
#TGPM-B<br />
w/ Portable Stand<br />
$2282.49<br />
#TGDPM-PMS<br />
w/ Bench Mount<br />
$1921.99<br />
#TGDPM-B<br />
#TGDPM-PMS<br />
<strong>Mitchell</strong>® TourGauge® Putter Machines Are Number One On Tour<br />
Worldwide & Will Register, Clamp & Bend All Putters That Meet<br />
USGA Approved Designs Per Appendix II Of The Rules Book.<br />
<strong>Mitchell</strong> ® TourGauge ® Putter Machines are CNC machined utilizing a precision ground<br />
slide-bearing gauge assembly available with an analog scale or digital LED display that<br />
moves from center of the machine to register against the putter shaft. This ensures<br />
100% accuracy with zero tolerance while adjusting for hosel position regardless of offset,<br />
non-offset or face progression of all right- and left-hand models: blades, cavity backs<br />
and mallets, including today’s latest designs of oversized mallet heads.<br />
Included With Machine:<br />
» 19” Adjustable Putter Aluminum Bending Bar<br />
» 16” Putter Shaft Bending Bar<br />
» Putter Nylon Clamp<br />
» Oversized Mallet Clamp<br />
» Mounting Hardware<br />
» Instruction Manual - Online<br />
» Putter Spec Charts<br />
» 27’ Roll Face Fixture Tape<br />
» AC Transformer (Digital Model Only)<br />
Go Mobile!<br />
See Page 8<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Angle Machines : Irons, Hybrids & Metal Woods<br />
4<br />
One Machine Bends<br />
Irons, Hybrids & Metal Woods<br />
Right- & Left-Hand<br />
The Steelclub ® Signature Angle Machine is the latest evolution of<br />
the world’s best bending machine and is our best seller. It uses<br />
Dual Precision Gauges for measuring and bending loft/lie angles on<br />
irons and face/lie angles on hybrids and metal woods. It doubles<br />
as a specification gauge that accurately measures loft, lie and face<br />
angles simultaneously with its patented measuring gauges.<br />
Shown<br />
w/ Iron<br />
Shown w/ Driver<br />
Use As Spec Gauge For<br />
Adjustable Tip Clubs<br />
PATENTED<br />
Included With Machine:<br />
» Angle Charts<br />
» 27’ Roll Face Fixture Tape<br />
» Instruction Manual - Online<br />
» Iron, Metal Wood & Hybrid Clamps<br />
» 27” Standard Hosel Adjustable Bending Bar<br />
» 27” Short Hosel Adjustable Bending Bar<br />
» Heavy-Duty 40” Floor Mount Stand<br />
(Installation Hardware Included)<br />
The new self-adjusting drivers, fairway metals and hybrids can be<br />
checked to record the actual adjustments made by repositioning<br />
the adapter. Not all company adjustments are the same. Use the<br />
Steelclub ® Signature Angle Machine to learn just how much of an<br />
adjustment is being made.<br />
Steelclub ® Signature Irons, Hybrids<br />
& Metal Woods Machine<br />
w/ Floor Mount<br />
$2799.99<br />
#SAMS-FMS<br />
Sets The<br />
“Industry Standard”<br />
Worldwide<br />
Go Mobile! See Page 8<br />
Shown<br />
w/ Hybrid<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Angle Machines : Iron Bending<br />
5<br />
#SAMSI-FMS<br />
New Design<br />
2016<br />
#TGIM-FMS<br />
#TGDIM-FMS<br />
#SAMI-FMS<br />
Steelclub ® and TourGauge ® Irons Angle<br />
Machines are precision gauges for measuring<br />
and bending loft/lie angles on all irons. A<br />
complete set of irons can be measured and<br />
adjusted in less then 10 minutes. They clamp<br />
all iron sole radiuses and wide top line designs.<br />
They easily bend 17-4 and 431 cast stainless<br />
steel and forged carbon steel heads, right- and<br />
left-hand. Technicians measure and bend in the<br />
same fixture, which eliminates operator error<br />
when using other measuring devices.<br />
Competitor Machines Do Not Compare To The Secure<br />
Clamping & Bending Capability Of <strong>Mitchell</strong> Machines<br />
Signature Irons<br />
w/ Floor Mount<br />
$2299.99<br />
#SAMSI-FMS<br />
TOUR GAUGE®<br />
Irons Machine<br />
w/ Floor Mount<br />
$2099.99<br />
#TGIM-FMS<br />
Digital Irons<br />
w/ Floor Mount<br />
$2449.49<br />
#TGDIM-FMS<br />
Steelclub ® Irons<br />
w/ Floor Mount<br />
$1649.99<br />
#SAMI-FMS<br />
Included With Machine:<br />
» Angle Charts<br />
» 27’ Roll Face Fixture Tape<br />
» Instruction Manual - Online<br />
» AC Transformer (Digital Model Only)<br />
» 27” Adjustable Bending Bar<br />
» Heavy-Duty 40” Floor Mount Stand<br />
(Installation Hardware Included)<br />
PATENTED<br />
#TGDIM-FMS<br />
Go Mobile! See Page 8<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Angle Machines : Performance Packages<br />
6<br />
Signature<br />
Package<br />
SteelClub® Signature<br />
Angle Machine For Irons,<br />
Hybrids, and Woods<br />
AND<br />
TourGauge® Digital<br />
Putter Machine<br />
Request<br />
Quote Now!<br />
All Packages<br />
Include<br />
SteelClub<br />
Package<br />
SteelClub® Signature<br />
Angle Machine For Irons<br />
AND<br />
TourGauge®<br />
Putter Machine<br />
Request<br />
Quote Now!<br />
TourGauge<br />
Digital<br />
Package<br />
TourGauge® Digital<br />
Irons Machine<br />
AND<br />
TourGauge® Digital<br />
Putter Machine<br />
Request<br />
Quote Now!<br />
Scale List Common Swing Weight Factors<br />
TourGauge<br />
Package<br />
TourGauge®<br />
Irons Machine<br />
AND<br />
TourGauge®<br />
Putter Machine<br />
Request<br />
Quote Now!<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Angle Machines : Accessories<br />
7<br />
Adjustable<br />
Bending Bar<br />
$210.99<br />
#SABB<br />
Adjustable Short Hosel<br />
Bending Bar<br />
$210.49<br />
#SASHBB<br />
Irons, Metal Woods & Hybrids<br />
Short Hosel Irons, Metal Woods & Hybrids<br />
Stamping Fixture<br />
$480.49<br />
#WSF<br />
Pack Of 5<br />
Top Aluminum<br />
Clamp Pad<br />
$31.49<br />
#STC-AP-5<br />
Iron Brass<br />
Bending Bar<br />
$204.99<br />
#SIBBB<br />
Adjustable Putter Aluminum<br />
Bending Bar<br />
$192.49<br />
#SAPABB<br />
Forged Irons<br />
Putters With Hosels<br />
A complete stamping kit which includes: the<br />
wedge stamping fixture, alphabet and number<br />
stamps, and black and white paint fill pens.<br />
Oil Based Wedge<br />
Stamp Paint Markers<br />
$34.99<br />
#MARKER-KIT1<br />
» Orange<br />
» Pink Rose<br />
» Light Blue<br />
» Violet<br />
Oil Based Wedge<br />
Stamp Paint Markers<br />
$34.99<br />
#MARKER-KIT2<br />
» Red<br />
» Green<br />
» Yellow<br />
» Blue<br />
Fits Steelclub® & TourGauge®<br />
Machines to protect top line on irons<br />
with Soft Chrome or Mirror Finish.<br />
Putter Shaft<br />
Bending Bar<br />
$87.47<br />
#SPSBB<br />
Used For Customizing<br />
Wedge Stamps<br />
Multi-Colored<br />
4 Pack<br />
Used For Customizing<br />
Wedge Stamps<br />
Single & Double Bend Putters<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Angle Machines : Accessories<br />
8<br />
Made of Steel<br />
Portable Machine Stand<br />
$359.99<br />
#PMS<br />
Floor Mount Stand<br />
$209.99<br />
#FMS<br />
Portable Machine Stand<br />
Kit For <strong>Mitchell</strong> Angle<br />
Machines<br />
$511.99<br />
#AM-PMS-KIT<br />
NEW<br />
DESIGN<br />
Bending<br />
Bar Hooks<br />
Bending<br />
Bar Hooks<br />
42” x 60”<br />
Platform for Portable<br />
Machine Stand<br />
40”<br />
$229.99<br />
#PMS-PLATFORM<br />
Replacement Platform for<br />
Portable Machine Stand Kit(s)<br />
Base for Portable<br />
Machine Stand<br />
$249.99<br />
#PMS-BASE<br />
24” x 24” Diamond Plate Steel Base<br />
w/ 40” Floor Mount Stand<br />
Great For Grinders,<br />
Buffers, Etc.<br />
Replacement Base for<br />
the Portable Machine Stand (PMS).<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Mobile <strong>Golf</strong> Cart Stand<br />
9<br />
No Room For A Club Repair Shop?<br />
Mobile Club Fitting & Repair Is Your Solution<br />
Shown Installed<br />
Shown With Grip Station<br />
Shown With Angle Machine<br />
The <strong>Mitchell</strong> <strong>Golf</strong> Cart Stand mounts in bagwell<br />
using both golf bag straps while the base is securely<br />
mounted in place using the clamshell clamp. The<br />
unit can easily be installed or removed in less than<br />
a minute and does not require a dedicated cart.<br />
» Bend Clubs Anywhere On The Course<br />
» Putter Fittings At The Practice Green<br />
» Replace Grips On The Driving Range<br />
» Fits Most Makes & Models Of <strong>Golf</strong> Carts<br />
<strong>Golf</strong> Cart Stand<br />
$449.99<br />
#GCS<br />
Packaged Deals<br />
Grip Station<br />
w/ GCS<br />
Steelclub ® Irons<br />
Machine w/ GCS<br />
TourGauge ® Putter<br />
Machine w/ GCS<br />
Steelclub ® Signature<br />
Irons Machine w/ GCS<br />
TourGauge ® Digital<br />
Putter Machine w/ GCS<br />
TourGauge ® Digital Irons<br />
Machine w/ GCS<br />
Steelclub ® Signature<br />
Irons, Hybrids & Metal<br />
Woods Machine w/ GCS<br />
$923.99<br />
#GS-GCS<br />
$1681.99<br />
#SAMI-GCS<br />
$1958.99<br />
#TGPM-GCS<br />
$2222.99<br />
#SAMSI-GCS<br />
$2137.49<br />
#TGDPM-GCS<br />
$2354.49<br />
#TGDIM-GCS<br />
$2787.49<br />
#SAMS-GCS<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Re-Grip<br />
10<br />
Industry’s Most Complete<br />
Gripping System<br />
Grip Station w/<br />
Portable Machine Stand<br />
» Pro Tour Grip Vise<br />
» Grip Tape Dispenser<br />
» Build-Up Tape Dispenser<br />
» Solvent Tray<br />
» 40” Floor Mount Stand & Hardware<br />
» Storage Shelf<br />
» Dual Club Racks<br />
Solvent<br />
Not Included<br />
(Page 9)<br />
$949.99<br />
#GS-PMS<br />
Portable Base<br />
24” x 48”<br />
Go Mobile!<br />
See Page 8<br />
Grip Station Bench Mount<br />
$664.49<br />
#GS-BM<br />
Grip Station w/ Floor<br />
Mount Stand<br />
$722.99<br />
#GS-FMS<br />
Grip Station<br />
Portable Stand Kit<br />
$479.99<br />
#GS-PMS-KIT<br />
Grip Solvent Tray & Bracket<br />
$45.99<br />
#GS-DPA<br />
Easy Shaft Size<br />
Adjustment<br />
Vise & Club<br />
Not Included<br />
Grip Tape Dispenser<br />
$174.99<br />
#GTD<br />
Pro Tour Grip Vise<br />
#PTGV-V<br />
Tape<br />
Not Included<br />
Grip Solvent Tray Only<br />
$14.99<br />
#GS-DP<br />
$174.99<br />
#PTGV-B or #PTGV-V<br />
#PTGV-B<br />
Grip Build-Up Tape Dispenser<br />
$52.99<br />
#GBTD<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Re-Grip<br />
11<br />
<strong>Mitchell</strong> ® <strong>Golf</strong> is the original inventor of the needle saver extension<br />
hose. Reduces needle breakage.<br />
Reduces Needle Breakage<br />
Grip Remover Gun w/<br />
Needle Saver Hose, 12<br />
Needles & Adapter<br />
$96.99<br />
#GRG-NSH-N-NA<br />
» Canister w/ Pressurized Pump<br />
» Needle Saver Extension Hose<br />
» Quick Change Needle Adapter<br />
» (12) 18-Gauge Needles<br />
Need Solvent?<br />
See Next Page<br />
Needle Saver Hose<br />
$14.99<br />
#NSH<br />
Grip Remover Gun w/<br />
12 Needles & Adapter<br />
$83.99<br />
#GRG<br />
QUICK CHANGE NEEDLE & ADAPTER DESIGN<br />
Manufactured by <strong>Mitchell</strong> ® <strong>Golf</strong><br />
For use with Grip Remover Gun<br />
Needle Saver Hose w/<br />
12 Needles & Needle<br />
Adapter<br />
12 Needles w/ Needle<br />
Adapter To Retro-Fit<br />
Grip Remover Gun<br />
$37.99<br />
#NSH-N-NA<br />
$32.99<br />
#GRG-RN12-A<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Re-Grip<br />
12<br />
1-Gallon<br />
$26.49<br />
#HF100-1G<br />
Grip Solvent<br />
Environmentally Safe & Economical<br />
» Formulated To Use With All Standard Grip Tapes<br />
» You Mist Tape Rather Than Pour Onto Tape<br />
» Non-Toxic, Non-Flammable, Odorless & Recyclable<br />
12 Roll Pack!<br />
Two-Sided<br />
Grip Tape<br />
$164.99<br />
#GT-ST2-12<br />
2” x 36 Yard Roll<br />
Grip Tape<br />
Remover Tool<br />
$39.99<br />
#GTRT<br />
Grip Tape<br />
Remover Tool Blade<br />
$19.49<br />
#GTRT-RB<br />
22 oz. Solvent w/<br />
Leakproof Spray Bottle<br />
$12.99<br />
#HF100-22<br />
22 oz. Leakproof<br />
Spray Bottle<br />
$5.99<br />
#HF100-SPRAYER<br />
Use 50%<br />
Less Than Other<br />
Solvents<br />
Exactly .0075” Thick<br />
(1/64” Increase In Grip Size Per Layer)<br />
Professional Grip<br />
Build-Up Tape<br />
$10.49<br />
#GBUT2<br />
2” x 60 Yard Roll<br />
27’ Roll<br />
Use with Steelclub®<br />
& TourGauge® Angle Machines.<br />
1/4” Face<br />
Fixture Tape<br />
$12.99<br />
#SFFT<br />
Pacten Tape Used On Face<br />
Fixture To Protect Club<br />
Face During Bending<br />
27” Roll<br />
5-Gallon<br />
$125.99<br />
#HF100-5G<br />
Professional<br />
Grip Tape<br />
$14.99<br />
#GT-ST2<br />
2” x 36 Yard Roll<br />
Use with TourGauge®<br />
Putter Machines.<br />
1” Face<br />
Fixture Tape<br />
$15.99<br />
#SFFT1<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Re-Shaft<br />
13<br />
Steelclub ® Graphite Shaft Pullers are CNC machined making them precision tools. The Selectable Hosel Stop, a <strong>Mitchell</strong> innovation,<br />
accommodates all shaft tip diameters and is the best in the industry. The interchangeable rubber shaft clamp is great for proper clamping<br />
pressure. The T-Handle turning is convenient and efficient saving time pulling graphite shafts.<br />
» Great For Heavy Volume Use<br />
» Precision CNC Machined<br />
» Low Friction Bearing Extracting Rod<br />
» Balanced Speed Handle<br />
» Bench Or Vise Mount<br />
» 2-1/2” Rubber Clamps<br />
» T-Handle Top Clamp<br />
» Selectable .335” - .500” Hosel Stop<br />
Best Model<br />
Available!<br />
Steelclub ® Graphite<br />
Shaft Puller Commercial<br />
E-Z Model<br />
$439.99<br />
#SGSPEZ<br />
• Better Performance<br />
• Accepts All Shaft Tip Diameters<br />
• Greater Clamping Pressure<br />
» Precision CNC Machined<br />
» Smooth Turning T-Handle Extracting Rod<br />
» Vise Mount<br />
» 2-1/2” Rubber Clamps<br />
» T-Handle Top Clamp<br />
» Selectable .335” - .500” Hosel Stop<br />
Steelclub ® Graphite<br />
Shaft Puller Pro<br />
Plus Model<br />
$349.99<br />
#SGSPPP<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Re-Shaft<br />
14<br />
Smaller, Sleeker, Better<br />
Graphite Shaft Puller<br />
Replacement Inserts<br />
$33.49<br />
#SGSP-INSERTS<br />
Club Repair Vac<br />
Request Quote<br />
Now!<br />
#BV<br />
Steelclub ® Shaft Tip & Hosel Gauge<br />
$87.99<br />
#SSTHG<br />
Fits Both Steelclub ®<br />
Graphite Shaft Puller Models<br />
Four precision ground pins of .335, .350, .355, .370<br />
for measuring hosel diameters and shaft tips.<br />
Accepts Oversized<br />
Metal Woods & Hybrids<br />
The Steelclub ® Hosel Boring Fixture features a T-Handle<br />
Brass Jaw that protects club finish and aligns hosel<br />
vertically. Precision machined to use with irons, hybrids<br />
and metal woods. Clamps to a drill press table with a<br />
C-Clamp. Works great on hard to remove broken shafts.<br />
Steelclub ® Hosel Boring Fixture<br />
$399.99<br />
#SHBF-B1<br />
Now in a smaller space-saving footprint! Our <strong>Mitchell</strong> <strong>Golf</strong> Club<br />
Repair Vac delivers the same high volume, high-pressure air<br />
movement system: 1200cf per minute of down-draft vacuum<br />
that eliminates almost all the shaft dust you create. Dust<br />
is pulled through a filtration system of two specially coated<br />
filters (included). These filters capture dust particulates as<br />
small as 8-micron in size. These filters are required to ensure<br />
the vacuum pressure needed to work sufficiently.<br />
Old Model<br />
New Model<br />
Shaft Tamping Plate<br />
$19.99<br />
#STP<br />
Drive Head<br />
Onto Shaft<br />
Hosel Brush For Irons<br />
w/ Handle<br />
$11.49<br />
#HB-I-H<br />
Hosel Brush<br />
For Irons<br />
$8.99<br />
#HB-I<br />
Use With An<br />
Electric Hand Drill<br />
5” x 6” x 1/4” Steel<br />
Black Oxide Finish<br />
Hosel Brush For Woods<br />
w/ Handle<br />
$11.49<br />
#HB-W-H<br />
Hosel Brush<br />
For Woods<br />
$8.99<br />
#HB-W<br />
Rotate<br />
Clockwise Only<br />
40” Height 42” Height<br />
30” Width 21” Width<br />
36” Length 36.5” Length<br />
Do not use other filters as they will not work properly.<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Re-Shaft<br />
15<br />
DigiFlex Frequency<br />
Spec Shaft<br />
6 Pack<br />
Finishing Pads<br />
$9.49<br />
#FIN-PAD<br />
Glass Beads – 4oz.<br />
Jar<br />
$7.49<br />
#GB<br />
Ideal for removing “shadows” from club<br />
head hosels after bending.<br />
Shaft Centering Beads<br />
.002″ Diameter<br />
Epoxy Mixing<br />
Sheets<br />
$49.99<br />
#DFM-SS<br />
$12.99<br />
#EMS<br />
DigiFlex 4” Zone<br />
Clamp<br />
$53.99<br />
#DFM4ZC<br />
Epoxy Wipes<br />
$4.99<br />
#WIPES<br />
Pack of 100<br />
BenchVAC<br />
Filters<br />
Corks For Woods<br />
Corks For Irons<br />
12 Pack<br />
36 Pack<br />
$5.49<br />
#CORK-W<br />
$5.49<br />
#CORK-I<br />
$68.99<br />
#BVF-PK-12<br />
$188.99<br />
#BVF-PK-36<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Epoxy<br />
16<br />
(4) 510 Quick Cure Cartridges & 7 oz. Gun Kit<br />
$119.99<br />
#EDS-KT7-510<br />
(4) 2020 Long Cure Cartridges & 7 oz. Gun Kit<br />
$114.49<br />
#EDS-KT7-2020<br />
7 oz. 510 Cartridge<br />
$20.99<br />
#EDS-510-7<br />
7 oz. 2020 Cartridge<br />
$16.99<br />
#EDS-2020-7<br />
7 oz. Gun<br />
$79.99<br />
#EDS-GUN7<br />
Self<br />
Dispensing!<br />
510 Pro-Fix<br />
Quick Cure Shaft<br />
Epoxy - 1 oz.<br />
$9.49<br />
#EDS-510-1<br />
» 10 Min. Work-Life<br />
» Ball Hitting In 45 Min.<br />
» Super-High Sheer Strength<br />
3M Scotch-Weld DP810<br />
Acrylic Epoxy - 1.7 oz.<br />
$51.49<br />
#EDS-DP810-1.7<br />
(4) 510 Quick Cure Cartridges & 1.7 oz. Gun Kit<br />
$79.99<br />
#EDS-KT1.7-510<br />
(4) 2020 Long Cure Cartridges & 1.7 oz. Gun Kit<br />
$68.99<br />
#EDS-KT1.7-2020<br />
1.7 oz. 510 Cartridge<br />
$12.99<br />
#EDS-510-1.7<br />
1.7 oz. 2020 Cartridge<br />
$10.49<br />
#EDS-2020-1.7<br />
1.7 oz. Gun<br />
$39.99<br />
#EDS-GUN1.7-M<br />
32 oz. Kit<br />
16 oz. Each<br />
16 oz. Kit<br />
8 oz. Each<br />
8 oz. Kit<br />
4 oz. Each<br />
2020 Pro-Fix Long Cure<br />
Epoxy Squeeze Bottles<br />
$36.99<br />
#EDS-2020-32<br />
2020 Pro-Fix Long Cure<br />
Epoxy Squeeze Bottles<br />
$25.49<br />
#EDS-2020-16<br />
Pro-Fix Quick Cure Epoxy<br />
$18.99<br />
#EDS-QC-8<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Ferrules<br />
17<br />
3/8” Wood<br />
.375” Height<br />
.350” ID<br />
.520” OD<br />
#FER375-350-520<br />
1/2” Wood<br />
.500” Height<br />
.335” ID<br />
.475” OD<br />
#FER500-335-475<br />
1/2” Wood<br />
.500” Height<br />
.335” ID<br />
.500” OD<br />
#FER500-335-500<br />
1/2” Wood<br />
.500” Height<br />
.335” ID<br />
.528” OD<br />
#FER500-335-528<br />
3/4” Wood<br />
.750” Height<br />
.335” ID<br />
.480” OD<br />
#FER750-335-480<br />
7/8” Wood<br />
.875” Height<br />
.335” ID<br />
.500” OD<br />
#FER875-335-500<br />
Standard Black Ferrules<br />
Per Dozen Pack<br />
$4.99<br />
» Organized In A Sturdy 14” x 9” Plastic Case<br />
» Specifications Indexed For Easy Identification<br />
& Re-Order<br />
1/2” Iron<br />
.500” Height<br />
.370” ID<br />
.528” OD<br />
#FER500-370-528<br />
1/2” Iron<br />
.500” Height<br />
.370” ID<br />
.550” OD<br />
#FER500-370-550<br />
5/8” Iron<br />
.625” Height<br />
.370” ID<br />
.530” OD<br />
#FER625-370-530<br />
3/4” Iron<br />
.750” Height<br />
.370” ID<br />
.543” OD<br />
#FER750-370-543<br />
288 Pieces Total<br />
» Black Standard Wood Ferrules<br />
6 Sizes / 12 Each<br />
1 Size / 24 Each<br />
96 Pieces<br />
» Black Standard Iron Ferrules<br />
8 Sizes / 24 Each - 192 Pieces<br />
7/8” Iron<br />
.875” Height<br />
.370” ID<br />
.525” OD<br />
7/8” Iron<br />
.875” Height<br />
.370” ID<br />
.560” OD<br />
1” Iron<br />
.1000” Height<br />
.370” ID<br />
.528” OD<br />
1” Iron<br />
.1000” Height<br />
.370” ID<br />
.570” OD<br />
Club Repair Ferrule Kit<br />
$85.99<br />
#FER-KT<br />
#FER875-370-525<br />
#FER875-370-560<br />
#FER1000-370-528<br />
#FER1000-370-570<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Ferrules<br />
18<br />
Graphite Bore-Thru<br />
Shaft Plugs<br />
$5.99<br />
#BTP-G<br />
Steel Bore-Thru<br />
Shaft Plug<br />
$5.99<br />
#BTP-S<br />
.150 Ferrule Bushing .335 ID<br />
.410 OD<br />
$4.49<br />
#FERB150-335-410<br />
Pack of 4<br />
For finishing bore-thru<br />
heads<br />
For finishing bore-thru<br />
heads<br />
Brass Shims<br />
$5.49<br />
#SHIM-355-370<br />
Brass Shims<br />
$5.49<br />
#SHIM-335-350<br />
Brass Shims<br />
.150 Ferrule Bushing .370 ID<br />
.410 OD<br />
$4.99<br />
#FERB150-370-410<br />
Pack of 4<br />
Height - 1” (Irons)<br />
Install Taper Tip .355” Tip<br />
Shaft Into Parallel .370”<br />
Diameter Hosel .355” - .370”<br />
Height - 3/4” (Woods)<br />
Install .335” Tip Shaft<br />
Into .350” Diameter Hosel<br />
.335” - .350”<br />
.410 Bushing .335 ID<br />
Packs of<br />
5<br />
$3.49<br />
#BUS335-410 Pack of 4<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Motors & Supplies<br />
19<br />
» 110 or 220/230 AC<br />
» 1/2” Double Arbor<br />
» 1/3 HP<br />
» 6” Abrasive Cut Off Wheel<br />
» 3450 RPM<br />
» On/Off Switch<br />
» 1” x 42” Belt Sander Attachment<br />
» 80 Grit Sanding Belt<br />
» Transparent Eye Shield<br />
Buffing Compounds<br />
Shaft Cutting Machine<br />
w/ Ferrule Turning Fixture<br />
110/120 Volt<br />
Shaft Cutting<br />
Machine<br />
110/120 Volt<br />
Shown With<br />
Ferrule Turning Fixture<br />
Red Rouge Buffing Compound – 1lb. Bar<br />
$6.99<br />
#BUFF-RR-1<br />
$623.99<br />
#SCM-FTF<br />
$554.99<br />
#SCM<br />
Includes<br />
Cutting Scale Table<br />
1/4” Increments<br />
Use for “coloring” operation to bring out a<br />
precise and mirror finish on soft metals.<br />
220/230 Volt<br />
$493.99<br />
#SCM-FTF-220/230V<br />
220/230 Volt<br />
$430.99<br />
#SCM-220/230V<br />
Tripoli Brown Rouge Buffing Compound<br />
– 1lb. Bar<br />
$6.99<br />
#BUFF-TBR-1<br />
» Perfect For Cutting Steel Or Graphite Shafts<br />
» .035” Thickness<br />
» Cuts Through Graphite Without Splintering The Tip<br />
» No Tape Is Necessary To Protect Tip<br />
Shaft Cut Off Wheel<br />
$9.49<br />
#SCOW<br />
Shaft Cut Off<br />
Wheels - 5 Pack<br />
$44.99<br />
#SCOW-5PK<br />
Use as “cutting down” operation and<br />
bringing out high luster on non-ferrous<br />
metals (no iron content).<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Motors & Supplies<br />
20<br />
Finishing Belts<br />
1” x 42”<br />
80 Grit Sanding Belt<br />
1” x 42” Graphite<br />
Tip Abrasive Belt<br />
2” x 36”<br />
80 Grit Sanding Belt<br />
$4.49<br />
#SB80-42<br />
Abrade Steel Shaft Tips<br />
$13.99<br />
#GTAB-42<br />
Abrade Composite Shaft Tips<br />
(Non-Woven)<br />
$8.49<br />
#GB80-36<br />
1” x 42” White<br />
Cloth Ferrule Belt<br />
$5.99<br />
#WFB-42<br />
Ferrule Turning<br />
(Soft Linen)<br />
2” x 36” Fine Grit<br />
Finishing Belt<br />
$17.49<br />
#FBF-36<br />
Buffing Wheel Rake<br />
$18.99<br />
#BWR<br />
1” x 30” Graphite Tip<br />
Abrasive Belt<br />
2” x 36” Medium<br />
Grit Finishing Belt<br />
Use to re-surface cloth buffing wheels by<br />
removing compound build-up<br />
$11.49<br />
#GTAB-30<br />
$27.49<br />
#FBM-36<br />
Ferrule Turning Fixture<br />
1” x 42” Egyptian<br />
Cloth Ferrule Belt<br />
2” x 48” 60 Grit<br />
Sanding Belt<br />
$109.99<br />
#FTF<br />
$4.49<br />
#RFB-42<br />
Ferrule Turning<br />
(Flat Surface)<br />
$8.49<br />
#GB60-48<br />
Allows you to control the shaft while<br />
turning a perfect finish on the ferrule.<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Motors & Supplies<br />
21<br />
The Buffing<br />
Machine!<br />
First Step<br />
In Bore-Thru<br />
Finishing<br />
Sanding & Buffing Machine!<br />
Dedicate use of belt sander<br />
attachment for shaft abrading<br />
or add Ferrule Turning Fixture<br />
for finishing ferrules.<br />
Wheels Not<br />
Included<br />
6” x 1”<br />
Includes Arbor<br />
Metal Deburring Wheel<br />
$79.99<br />
#MDW<br />
» 1/2” Double Arbor<br />
» 1/3 HP<br />
» 3450 RPM<br />
» 110 or 220/230 AC Power Cord<br />
» On/Off Switch<br />
» Arbor Washer & Nut Included<br />
» 1” x 42” Belt Sander Attachment<br />
Belt Not<br />
Included<br />
(Page 14)<br />
» 1/2” Double Arbor<br />
» 1/3 HP<br />
» 3450 RPM<br />
» 110 or 220/230 AC Power Cord<br />
» On/Off Switch<br />
» Arbor Washers & Nuts Included<br />
Second Step<br />
In Bore-Thru<br />
Finishing<br />
Buffer Motor<br />
110/120 Volt<br />
$422.99<br />
#BM6<br />
220/230 Volt<br />
$422.99<br />
#BM6-220/230V<br />
6” x 1”<br />
Includes Arbor<br />
Metal Finishing Wheel<br />
$51.99<br />
#MFW<br />
1” x 6” Buffing<br />
Wheel Not Included<br />
Belt Sander/<br />
Buffer Motor<br />
110/120 Volt<br />
Shown Without<br />
Ferrule Turning<br />
Fixture<br />
BSBM w/ Ferrule<br />
Turning Fixture<br />
110/120 Volt<br />
Set of 3<br />
1/2”, 5/8” & 3/4”<br />
Arbors<br />
Polishes The<br />
Brightest Finish<br />
w/o Compound<br />
$509.99<br />
#BSBM<br />
$599.99<br />
#BSBM-FTF<br />
Arbor Adapter<br />
Metal Polishing Wheel<br />
220/230 Volt<br />
220/230 Volt<br />
$9.99<br />
#ARBOR-ADP<br />
6” x 1”<br />
Includes Arbor<br />
$79.99<br />
#MPW<br />
$489.49<br />
#BSBM-220/230V<br />
$577.49<br />
#BSBM-FTF-220/230V<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Swing Weight<br />
22<br />
Ram Corks<br />
Down Shaft &<br />
Drive Club Head<br />
From Shaft<br />
1-1/4” Dia.<br />
Rubber Grip<br />
50” Steel Ram Rod<br />
Scale List Common Swing Weight Factors<br />
Zero Balance<br />
Beam Weight<br />
1/4” Dia.<br />
Heavy-Duty Rod<br />
$20.99<br />
#RAMROD<br />
Industry’s Only CNC Milled Swing Weight Scale!<br />
» Levels Balance Beam<br />
» Ensures Accurate Readings<br />
» Unique Design<br />
» Easy To Use<br />
» 14” Fulcrum<br />
» Swing Weight Scale - D2, Etc.<br />
» Total Weight Scale In Ounces & 5 Gram Increments<br />
» Easy-Slide Balance Weight<br />
» Beautiful Aluminum & Black Colors<br />
» Precision Machined From Aluminum & Steel<br />
$349.99<br />
#TGSWS<br />
This Unique<br />
<strong>Mitchell</strong> ® Design Sets<br />
A New Industry<br />
Standard!<br />
Brass Tip Weights<br />
1 Gram<br />
#BW1<br />
Pack of 12<br />
2 Gram<br />
#BW2<br />
3 Gram<br />
#BW3<br />
4 Gram<br />
#BW4<br />
Fits both wood and iron steel shafts with tip diameters of .335” to .370”.<br />
5 Gram<br />
#BW5<br />
6 Gram<br />
#BW6<br />
7 Gram<br />
#BW7<br />
8 Gram<br />
#BW8<br />
Brass Tip Weights<br />
For Steel Shafts<br />
$7.49<br />
Fits .335 To .370<br />
Tip Steel Shafts<br />
144<br />
Total Pieces<br />
» 24 Each Of 1, 2, 3, 4 Gram<br />
» 12 Each of 5, 6, 7, 8 Gram<br />
» Visual Inventory<br />
Brass Tip Weight Kit<br />
For Steel Shafts<br />
$79.49<br />
#BW-KT<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Measuring<br />
23<br />
Measuring Tool For Woods, Hybrids, Irons & Putters<br />
Engineered with a unique sole centering method guaranteeing accurate lengths for<br />
all lie angles. This ensures a consistent length progression between clubs in every set.<br />
Conforms to USGA method for measuring maximum driver length of 48”.<br />
Clublength<br />
Ruler Measuring Tool<br />
Complete Kit<br />
$149.49<br />
#CLR-MT-KT<br />
Mark Exact<br />
Length For Butt<br />
Trimming<br />
Clublength<br />
Marking Guide<br />
$33.49<br />
#CLR-MG<br />
Buy Together<br />
& Save!<br />
Clublength Ruler<br />
w/ Sole Plate<br />
$100.99<br />
#CLR-MT<br />
Clublength<br />
Sole Plate<br />
<strong>Mitchell</strong>® Putter Ruler<br />
$24.99<br />
#PR<br />
Measures Right- &<br />
Left-Hand Putters Up<br />
To 48”<br />
This unique ruler measures all putters directly down<br />
the shaft plane. This is the most accepted method for<br />
putter length measurements. Locate the 2 dowel pins<br />
on the shaft and position putter in its lie angle position<br />
with grip in center of ruler. Read putter length at end of<br />
grip. Measures right- and left-hand putters up to 48”.<br />
Fits With Sole<br />
Centering Method<br />
On Sole Plate<br />
Clublength<br />
Putter Adapter<br />
$33.49<br />
#CLR-PSA<br />
48” Ruler<br />
Sole Plate<br />
Markings On<br />
Edges & Center<br />
$78.99<br />
#CLR-SP<br />
Clublength<br />
48” Ruler<br />
$16.49<br />
#CLR<br />
Angle Charts<br />
$4.99<br />
#MAC<br />
4 Pads<br />
50 Sheets Each<br />
Record Loft,Lie & Face Angles<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Accessories<br />
24<br />
.335” Diameter<br />
#DB8.6<br />
Drill Bit<br />
$10.99<br />
1/2” x 36 Yard Roll<br />
.350” Diameter<br />
#DB8.9<br />
.370” Diameter<br />
#DB9.4<br />
Drill Bit Package (All 3)<br />
$27.99<br />
#DB-PK<br />
5 Mil Thick<br />
Lead Tape<br />
$45.99<br />
#LT-36YD<br />
.600” Butt Dia.<br />
1/2” x 100” Roll<br />
3” Graphite<br />
Shaft Extender<br />
3” Oversize Ultralight<br />
Shaft Extender<br />
Lead Tape<br />
$4.99<br />
#GSE-600<br />
$4.99<br />
#GSE-600OS<br />
5 Mil Thick<br />
$9.49<br />
#LT-100IN<br />
Replacement<br />
1/8” Drill Bit<br />
$7.99<br />
#DB1/8<br />
1/2” x 75” Roll<br />
High-Density<br />
Lead Tape<br />
10 Mil Thick<br />
$12.99<br />
#LT-75IN-HD<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Hand Tools<br />
25<br />
Measures In Pounds, Ounces, Penny<br />
Keep It Clean!<br />
All Purpose - Heavy Duty<br />
Weight Or By Piece Count!<br />
Backlit LCD For<br />
Easier Reading<br />
Gram Scale<br />
Horse Hair Brush<br />
$11.49<br />
#HHB<br />
Retractable Utility<br />
Knife w/ Blade<br />
$7.49<br />
#URK<br />
$74.49<br />
#GRAM-S<br />
Hook Blade Grip<br />
Knife w/ 5 Blades<br />
5 Pack of Replacement<br />
Hook Blades<br />
» Measures To 600 Grams<br />
» Extra Large LCD Readout<br />
» 3 AAA Batteries - Included<br />
» Automatic Shut-Off<br />
» Rubberized Face Plate<br />
» Easy Touch Keys<br />
» Stainless Steel Platform<br />
Measures In<br />
1/10 Gram<br />
Increments<br />
$12.99<br />
#HBK<br />
$3.99<br />
#HBK-5B<br />
Ideal For Cutting Off Grips<br />
Great For Removing Or Installing Ferrules<br />
Maximum Gripping Power<br />
Protect Shafts & Club<br />
Head With 4” Rubber<br />
.335”, .350”, .370”, 400” & .500”<br />
Hole Diameters<br />
Aluminum<br />
Shaft Clamp<br />
$36.99<br />
#ALUM-SC<br />
.335”, .370” & .400” Hole Diameters<br />
Aluminum<br />
Vise Clamp<br />
$72.49<br />
#ALUM-VC<br />
Magnetized<br />
V-Groove Jaws<br />
Pro Tour Rubber<br />
Vise Pads<br />
$59.99<br />
#PTRVP<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Fitting<br />
26<br />
8” x 16” x 1/8” Thick<br />
Lie-Mark Board<br />
$22.99<br />
#LMB<br />
For Accurate Markings Use At The<br />
Same Level As The <strong>Golf</strong>er’s Feet<br />
Ideal method for determining dynamic lie angles to fit<br />
golfers. Special material leaves a black mark on the club’s<br />
sole (easily removed) to properly interpret required lie<br />
angle adjustments.<br />
Magnetic Lie Angle Pointer<br />
Shows how ball flight is misdirected if<br />
lie angle is incorrect at impact.<br />
4 Pads<br />
50 Sheets Each<br />
Putter Spec Charts<br />
$21.99<br />
#MLAP<br />
Demonstrates Ball Flight<br />
Direction As It Leaves Club Face<br />
Club Not Included<br />
Record Putter Fitting Data<br />
$4.99<br />
#MPC<br />
Search For The Perfect Swing<br />
Alastair Cochran / John Stobbs<br />
50 Sheets<br />
Must read book for <strong>Golf</strong> Professionals<br />
and Club Repair Technicians.<br />
$14.99<br />
#SPS-B<br />
Invaluable For Recording <strong>Golf</strong> Club<br />
Specifications<br />
<strong>Golf</strong> Club Specification<br />
Forms<br />
$5.99<br />
#GCSF<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Parts<br />
27<br />
Extenders for Grip Station<br />
Portable Stand<br />
$39.99<br />
#PMS-EXTENDERS<br />
TGPM/TGDPM – Top Clamp Assembly<br />
$59.99<br />
#PM-TCA-01<br />
Replacement Extenders for Grip Station<br />
Portable Machine Stand Kit (GS-PMS-KIT).<br />
For use with:<br />
» TourGAUGE® Putter Machine<br />
» TourGAUGE® Digital Putter Machine<br />
Lie Plate w/ Scale<br />
$72.49<br />
#AM-LPA<br />
Miniature Shaft Encoder<br />
$27.99<br />
#ENCODER<br />
For use with:<br />
» STEELCLUB® Irons Angle Machine<br />
For use with:<br />
» TourGAUGE® Digital Machines<br />
Wood Sole Base<br />
$43.99<br />
#SAMP-WSB-02<br />
Digital Encoder<br />
Cable<br />
$30.99<br />
#ENCODERCABLE<br />
Large Mallet Clamp<br />
$72.49<br />
#TGPM-LMC<br />
For use with:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
For use with:<br />
» TourGAUGE® Digital Machines<br />
For use with:<br />
» TourGAUGE® Putter Machine<br />
» TourGAUGE® Digital Putter Machine<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Parts<br />
28<br />
Wood Back Clamp, Sole Base & Sole<br />
Fixture Assembly<br />
Scales<br />
$141.99<br />
#SAMP-WCS<br />
For use with:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine.<br />
Centering Scale For:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
Centering Scale<br />
$9.99<br />
#CENTERSCALE<br />
Hybrid Clamp Set<br />
$142.99<br />
#SAMP-HCS<br />
For use with:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine.<br />
Frequency Board Length Scale for:<br />
» DigiFlex Frequency Board<br />
Frequency Board<br />
Length Scale<br />
$5.49<br />
#DFM-LSCALE<br />
Hybrid Sole Rest<br />
$87.49<br />
#HC-WSFA<br />
For use with:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
Loft Scale for:<br />
» STEELCLUB® Irons Angle Machine<br />
Loft Scale<br />
$9.49<br />
#AM-LS<br />
Loft Scale for:<br />
» STEELCLUB® Irons Angle Machine<br />
SAMI – Loft Scale<br />
$8.49<br />
#SAMI-LS<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Parts<br />
29<br />
SAMI/SAMSI/TGDIM – Top Clamp<br />
Assembly<br />
$66.99<br />
#SAMI-TCA-01<br />
Pro Tour Grip Vise Pad Set<br />
$20.99<br />
#PTGV-PAD-SET<br />
For use with:<br />
» STEELCLUB® Irons Angle Machine<br />
» STEELCLUB® Signature Irons Angle Machine<br />
» TourGAUGE® Digital Irons Machine<br />
For use with:<br />
» Pro Tour Grip Vise<br />
Back Clamp Block<br />
$44.99<br />
#PM-BCB-02<br />
Hybrid Back Clamp<br />
$44.99<br />
#HC-BCA<br />
For use with:<br />
» TourGAUGE® Putter Machine<br />
» TourGAUGE® Digital Putter Machine<br />
For use with:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
For use with:<br />
SAMS/SAMP –<br />
Back Iron Clamp<br />
Assembly<br />
$46.49<br />
#SAMP-BICA<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
SAMI/TGDIM – Back Iron<br />
Clamp Weldment<br />
$48.49<br />
#SAMI-BICW<br />
For use with:<br />
» STEELCLUB® Irons Angle Machine<br />
» TourGAUGE® Digital Irons Machine<br />
For use with:<br />
Back Wood Clamp<br />
$36.99<br />
#SAMP-BWCA-01<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Re-Gripping 30<br />
SAMS/SAMP<br />
Iron Sole Rest Set<br />
$36.99<br />
#SAMP-ISC-SET<br />
SAMSI – Iron Sole Rest Set<br />
$35.49<br />
#SAMSI-ISC-SET<br />
SAMI/TGDIM – Iron Sole Rest Set<br />
$36.99<br />
#SAMI-ISC-SET<br />
For use with:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine.<br />
For use with:<br />
» STEELCLUB® Signature Irons Angle Machine<br />
For use with:<br />
» STEELCLUB® Irons Angle Machine<br />
» TourGAUGE® Digital Irons Machine<br />
Brass Sole Rest Sets<br />
Brass Sole Rests<br />
SAMI/TGDIM<br />
SAMS/SAMP/SAMSI<br />
SAMI/TGDIM<br />
SAMS/SAMP/SAMSI<br />
$53.99<br />
#SAMI-ISC-B-SET<br />
$53.99<br />
#SAMP-ISC-B-SET<br />
$48.49<br />
#SAMI-ISC-B<br />
$47.49<br />
#SAMP-ISC-B<br />
For use with:<br />
» STEELCLUB® Irons Angle Machine<br />
» TourGAUGE® Digital Irons Machine<br />
For use with:<br />
» STEELCLUB® Signature Irons Angle Machine<br />
For use with:<br />
» STEELCLUB® Irons Angle Machine<br />
» TourGAUGE® Digital Irons Machine<br />
For use with:<br />
» STEELCLUB® Signature Irons Angle Machine<br />
SAMS/SAMP<br />
Top Clamp Assembly<br />
$119.99<br />
#SAMP-TCA-01<br />
Top Clamp Pad Assembly<br />
$30.99<br />
#PM-TCPA<br />
SAMS/SAMP/SAMSI – Sole<br />
Rest<br />
$30.99<br />
#SAMP-ISC-02<br />
SAMI/TGDIM – Sole Rest<br />
$29.99<br />
#SAMI-ISC-02<br />
For use with:<br />
For use with:<br />
For use with:<br />
For use with:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine.<br />
» TourGAUGE® Putter Machine<br />
» TourGAUGE® Digital Putter Machine<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
» STEELCLUB® Signature Irons Angle Machine<br />
» STEELCLUB® Irons Angle Machine<br />
» TourGAUGE® Digital Irons Machine<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Parts<br />
31<br />
Wood Sole Fixture<br />
Assembly<br />
$75.99<br />
#SAMP-WSFA-SET<br />
Pro Tour Grip Vise Pad Set Tape<br />
$2.99<br />
#PTGV-PAD-SET-TAPE<br />
For use with:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
For use with:<br />
» Pro Tour Grip Vise Pad set<br />
Locking Camber Kit<br />
Toe Stop<br />
$16.99<br />
#LCB-KT<br />
For use with:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
$35.49<br />
#AM-TSA-01<br />
For use on the following machines:<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Signature Irons Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
» STEELCLUB® Irons Angle Machine<br />
» STEELCLUB® Digital Irons Machine<br />
Putter Sole Fixture Assembly<br />
$44.99<br />
#PM-PSFA-SET<br />
For use with:<br />
» TourGAUGE® Putter Machine<br />
» TourGAUGE® Digital Putter Machine<br />
Knurled Knob for DigiFlex Frequency<br />
Meter Clamp Adjustment<br />
Knurled Knob<br />
$10.49<br />
#DFM-TS-02<br />
For use with:<br />
Hybrid Toe Stop<br />
$39.99<br />
#HC-TSA<br />
» STEELCLUB® Signature Angle Machine<br />
» STEELCLUB® Plus Angle Machine<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Re-Gripping Gear 32<br />
<strong>Mitchell</strong> <strong>Golf</strong> Adjustable<br />
Patch Hat<br />
Lightweight and Breathable Adjustable<br />
Performance Mesh Hat<br />
Colors:<br />
White, Gray<br />
<strong>Mitchell</strong> <strong>Golf</strong> Adjustable<br />
Patch Hat<br />
Lightweight and Breathable Adjustable<br />
Cotton Mesh Hat<br />
Colors:<br />
Gray, Red, Black<br />
Want More<br />
<strong>Mitchell</strong> <strong>Golf</strong><br />
Content?<br />
Like & Follow<br />
Us on Social<br />
$32.99<br />
#HAT-MESH<br />
$32.99<br />
#HAT-COTTON<br />
@mitchellgolfco <strong>Mitchell</strong> <strong>Golf</strong> @<strong>Mitchell</strong><strong>Golf</strong>Co @<strong>Mitchell</strong><strong>Golf</strong>Co<br />
Dancing Angle Machine<br />
Leather Headcover<br />
<strong>Mitchell</strong> <strong>Golf</strong> Machine Cover<br />
Subscribe to Our Newsletter!<br />
$109.99<br />
#LEDAMLH<br />
$54.99<br />
#COVER<br />
Limited Edition Dancing Angle Machine Leather<br />
Headcover by Winston Collection<br />
Help keep your investment clean and protected with our<br />
durable machine covers featuring the <strong>Mitchell</strong> <strong>Golf</strong> logo.<br />
Designed to fit over all machines.<br />
Stay up to date with new products, announcements,<br />
exclusive deals and more by signing up!<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
SKIP<br />
COVER INFO FREQUENCY ANGLE MACHINES GOLF CART STAND RE-GRIP RE-SHAFT EPOXY FERRULES MOTORS & SUPPLIES SWING WEIGHT MEASURING ACCESSORIES HAND TOOLS FITTING PARTS<br />
SKIP<br />
GOLF<br />
Gear<br />
33<br />
<strong>Mitchell</strong> <strong>Golf</strong> T-Shirt<br />
Heather Red, Heather Storm Gray, Heather Columbia<br />
Blue, Heather Military Green, Heather Navy and more<br />
w/ Vintage White Screen Print<br />
Sizes:<br />
S-XXL<br />
$24.99<br />
#TSHIRT<br />
E-Gift Card<br />
<strong>Mitchell</strong> <strong>Golf</strong> E-Gift Cards are the perfect<br />
gift for your golf enthusiast.<br />
$50.00 - $500.00<br />
#E-GCARD<br />
<strong>Mitchell</strong> <strong>Golf</strong><br />
Hooded Sweatshirt<br />
Lightweight French Terry Color<br />
Options: Forest Green Heather,<br />
True Navy, True Royal<br />
Fleece Pullover Color Options:<br />
Athletic Heather, True Red<br />
Sizes:<br />
M-XXL<br />
$49.99<br />
#MG-SS<br />
What’s Your Angle Banner<br />
Display your <strong>Mitchell</strong> <strong>Golf</strong> pride with this uniquely<br />
designed and colorful banner!<br />
<strong>Golf</strong> Questions?<br />
Get Answers!<br />
About <strong>Mitchell</strong> <strong>Golf</strong> Equipment<br />
Club Fitting<br />
Shaft Frequency<br />
Club Building & Repair<br />
Ask The Pro<br />
Patrick Gallagher, PGA<br />
Director of <strong>Golf</strong> Operations<br />
$69.99<br />
#BANNER<br />
» E-Gift Cards never expire and carry no fees<br />
» Redeemable for all products on <strong>Mitchell</strong><strong>Golf</strong>.com<br />
» Gift card amounts come in: $50, $100, $250, and $500<br />
<strong>Mitchell</strong> ® Machines - #1 On Tour Worldwide - 29 Years<br />
800-437-1314 : MITCHELLGOLF.COM<br />
Subscribe to eNews for Special Offers / Promotions
Change language