New Tools 8000 V1.15 and firmware 3.09 - Honeywell Life Safety ...

hlsaustria

New Tools 8000 V1.15 and firmware 3.09 - Honeywell Life Safety ...

New Tools 8000 V1.15 and firmware 3.09

Remote maintenance function “ReCo” – available now with the latest Tools

8000

With the latest version of Tools 8000 you have now a remote maintenance function included.

Similar as it has been with predecessor “TEDIS” you can now access the FACP via modem

connection or locally (also via essernet) to read out event memory, switch on/off groups and

controls and many more. ReCo shows you the same messages in Tools 8000 which are

currently displayed on the panel itself.

Tab "Event Memory"

With the latest version of Tools 8000 you now have an comfortable access into the event

memory of connected panels.

Honeywell Life Safety Austria GmbH | 1230 Vienna – Austria | Lemböckgasse 49

T +43 1 6006030 | F + 43 1 6006030-900 | hls-austria@honeywell.com | www.hls-austria.com Page 1


New Search function

With the latest version of Tools 8000 you can now easily search for serial numbers, group

numbers, group texts and many more. Tools 8000 will then guide you through all relevant

search results. This feature fastens your search process for programmed elements even in

large installations.

Other improvements

In connection with the latest firmware 3.09 for IQ8Control panels the following improvements

are available:

• Number of switch functions increased to 6.000

• Indication of control input state

New switch function “Test zone”

• Optional indication of verification/delay time in panel display

• Optional suppression of printout for TAL

• Deletion of event memory with tools8000

Honeywell Life Safety Austria GmbH | 1230 Vienna – Austria | Lemböckgasse 49

T +43 1 6006030 | F + 43 1 6006030-900 | hls-austria@honeywell.com | www.hls-austria.com Page 2

More magazines by this user
Similar magazines