Pryme Catalogue 2019/20

PrymeAustralia

PRODUCT

CATALOGUE

2019/20


CONTENTS

ERGODYNE

ANSI Compliant and best practice 2

SQUIDS

Tool tethering kits 6

Tool traps 8

Tool tethering 18

Grabber & tie hook 30

Tool topping 32

Gear & tool storage 34

EQUIPMENT

Transport 101 36

Guide 38

PROFLEX

Anti-vibration gloves 40

SKULLERZ

Bump caps 42

ERGONOMICS

Sprains and strains 48

PROFLEX

Back supports 50

Knee pads 52

CHILL-ITS

Cooling range 56

SHAX WORK SHELTER

Pop-up series 74

N-FERNO

Winter warming 76

SQWINCHER

QWIK STIKS

Sugar Free electrolyte enhanced sachets 82

SQWEEZE ® POPS

Electrolyte enhanced frozen pops 84

Liquid concentrate 86

Electrolyte enhanced fast pack 90

Retail packs 92

Accessories 93

GREVEN SKIN CARE SOLUTIONS

Before work skin barrier protection 98

During work industrial hand cleaners 100

After work moisturising care 102

MAXI BLOCK

Sunscreen range 107

ZincOn 110

Outbacker with Insect repellent 112

Aloe Vera 113

After sun 113

CASE AND PALLET INFORMATION

Ergodyne 114

Sqwincher & Peter Greven 118

Maxi Block 119

Sqwincher ® is an electrolyte

enhanced beverage for effective

hydration & is the recognised

leader in providing hydration

solutions to hot workplaces, to

help reduce heat related illness

& accidents.

Keep your workers safe &

productive with Sqwincher ®

hydration that works.

Ergodyne has pioneered the

development of products that

make the workplace a better

place. All products are precisely

crafted to manage the elements,

improve productivity and provide

protection for workers on job

sites all over the world.

Work Gear:

36 years of tenacity.

With over 90 years' experience

in producing industrial skin care,

Greven Skin Care distinguishes

itself on 3 levels:

• Optimal Skin Compatibility

• Environmentally Sound

• Exceptional Cost Effectiveness

1. PG Skin Care products reduce

the risk of occupational skin disease

and improve workers skin health

2. Certified earth friendly products,

fully biodegradable, solvent free

with no harmful ingredients that

will clog pipes, drains or run off

3. Metered Dispensers stop waste

and overuse, reduced amount

of waste from business.

Keeping working skin healthy

Australia and New Zealand have

very high levels of UV radiation

during summer months. That's why

it is important to protect yourself

against these damaging sun rays

with well formulated sunscreen.

Maxiblock protects workers from

both UVA and UVB sun rays.

Protection you can trust .

PRYME I +61 7 3374 4544 I WWW.PRYME.COM.AU I HEAD OFFICE: 18/49 BELLWOOD BUSINESS PARK, DARRA, QLD 4076


MAKING THE

WORKPLACE A

BETTER PLACE 1

Delivering the most innovative, well -crafted safety gear

& training solutions that safety professionals demand,

workers desire and job sites require.

Providing protection, promoting prevention and ensuring

compliance. All driving towards the goal of ZERO injuries.

PRYME.COM.AU


Accidents from dropped

objects account for the

fourth highest proportion

of all workplace

incidents in Australia.

PREVENTABLE STATS

Australia

19

Fatalities per year

10%

of all Workplace incidents

PRYME TIP:

New Zealand

82%

Fatalities 2013-2019

10%

of all Workplace incidents

Luck is bad policy – Drops will happen – create a Drops Free Zone TM

PREVENT THIS FROM HAPPENING. Talk to us today: sales@pryme.com.au

EMPLOYER OBLIGATIONS

AUSTRALIA

Sections 34-38 of the Workplace Health & Safety (WHS)

Act 2011, requires employers to minimise risk where

reasonably practicable to employees. Safe Work Australia

published the “Falling Objects Fact Sheet” in 2012

that required tools and materials to be tethered

when working at heights.

NEW ZEALAND

All tools and equipment are to be attached by a cord

unless another effective method is used to prevent a

falling hazard to meet the requirements of the

Health Safety in Employment Act 1992. AS/NZS 4488

also requires all tools and equipment to be tethered

when working at heights.

2 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


WHAT DOES ANSI/ISEA 121 ENTAIL?

The ANSI (American National Standards Institute) and ISEA

(International Safety Equipment Association) 121 – 2018

is a standard that consists of design, testing, performance

and labelling requirements for tool tethering systems and

containers used to transport, secure and position tools and

equipment at heights.

The 121 standard gives workers guidance for best practice

on what equipment to use when implementing a tethering

program. How to implement a program, and assistance in

doing so will be provided by your safety expert.

THE CATEGORIES OF EQUIPMENT IN

THE ANSI/ISEA 121-2018 STANDARD

ANCHOR & TOOL ATTACHMENTS

DROP

FREE

ZONE

ESTABLISHING

BEST PRACTICE

A

TOPPED

A

TETHERED

B

5960

CONTAINERS

Bags and buckets used to transport tools and equipment

to and from at heights work zones. Tool pouches, bags

and hoist buckets/bags should have a secure closure

or “top” that can cover contents and prevent them from

spilling if tipped.

If a container does not have a secure closure it must

have tethering points available.

TRAPPED

C

TOOL TETHERS

B

C

TOOL TETHERS

Tethering is the retention of the tools and equipment being

used to the anchor points that hold them, most commonly

with a tool lanyard. These lanyards should have the proper

connections on each end for the tools and anchors being

used. They should also be made with a shock-absorbing

design whenever possible.

TOOL AND ANCHOR ATTACHMENTS

Retrofit attachment points installed onto tools, equipment

or fixed anchor locations for connecting lanyards. Most

tools do not come with a secure attachment point built

into the tool. In these situations, a secure attachment

point must be created.

CONTAINERS

COLOUR COORDINATE FOR QUICK AND EASY IDENTIFICATION

Ergodyne Objects at Heights Solutions are

colour coordinated by capacity ranges.

LIGHT

HEAVY













OK to Anchor

to User's Body

Must Anchor to Separate Structure

PRYME.COM.AU

3


Trapping refers to retrofitting a

connection point onto a tool. Most

tools do not come with a secure

attachment point built into the tool.

In these situations, a secure

attachment point must be created.

3780

3755

3790

3770

3700

3713

Once all tools have a connection

point, the appropriate tethering

solution can be selected.

3119F(x)

3139

Lastly, once all tools are safely

tethered, it is imperative to

connect them to a determined

and secure anchor point.

3175

3114

5555

3740

5550

3114

3703

0.45kg

0.34kg

0.23kg

Dual Swiveling Locking Carabiner

5555 / 5550

0.9 kg

kg

4.6 6.8kg

3713 - Swivel Tail

(Rotation Tools)

3703 - Fixed Tail

(Straight Tools)

SUPPORT & TRAINING VIDEOS

Learn more by visiting our

comprehensive online video library.

www.pryme.com.au/video-library

PRYME BLOG

The Pryme Blog is the place for industry insights, safety

topics, regulations and the latest news and trends. Access our

blog via: www.pryme.com.au/blogs

PRODUCT AND INFORMATIONAL RESOURCES

We have various product and informational flyers & brochures

available to learn more about our products and general

information about creating a drops free zone. Reach out to us

to have access to our popular material: sales@pryme.net.au

CREATE A TETHERING POINT

TRAPPING

6.8 kg

One-step retrofit attachment Two-step retrofit attachment

3790 - Shackle Traps 3700 - Web Tool Tails

3755 - Tape Traps

3770 - Tape Measure Trap

0.9 kg

0.11 kg

3703 / 3713 - Elastic Tool Tails

3740 - Rotation Hand Tool

Traps - Slips

3755 - Tape Traps

2.7 kg

TETHERING

CONNECTING

3780 - Power Tool Trap

SELECT A TETHERING SOLUTION

3114

Wrist Lanyard

3175

Accessory Anchor

0.9kg Tool Tethering Kit 3180

0.9kg Tool Tethering Kit 3180

Tether up to six 0.9kg tools

Tether up to six 0.9kg tools

Kit includes:

• 3700: 11.5cm Web Tool Tails (6-pack)

Kit includes:

• 3755: Self-Adhering Tape Trap

requires no heat

• 3130S: Coiled Lanyard Design Prevents

Snagging

• 3700: 11.5cm Web Tool Tails (6-pack)

• 3755: Self-Adhering Tape Trap

requires no heat

• 3130S: Coiled Lanyard Design Prevents

Snagging

1.4 kg 18 kg

Part no: 19650

Part no: 19650

3119F(x)

Shock-absorbent Lanyard

CONNECT TO AN ANCHOR POINT

Tool Belts

12 kg

Tether one standard tape measure

Kit 3190 includes:

• 3770: Tape Measure Trap

• 3130S: Coiled Lanyard Design

Prevents Snagging

Safety Harness

3139

Heavy Duty Lanyard

Tape Measure Tethering Kits 3190 / 3193

Tape Measure Tethering Kits 3190 / 3193

Tether one standard tape measure

Kit 3190 includes:

• 3770: Tape Measure Trap

• 3130S: Coiled Lanyard Design

Prevents Snagging

Kit 3193 includes:

• 3770: Tape Measure Trap

Kit 3193 includes:

• 3100F(x): Tool Lanyard Single Carabiner

• 3770: Tape Measure Trap

• 3100F(x): Tool Lanyard Single Carabiner

3190

3190

3114

Wrist Lanyard

3193

3190 - Part no: 19660 | 3193 - Part no: 19663

3190 - Part no: 19660 | 3193 - Part no: 19663

Ready-to-Tether Kits

Ready-to-Tether Kits

2.3kg Tool Tethering Kit 3181

Tether up to four 2.3kg tools

2.3kg Tool Tethering Kit 3181

Kit includes:

Tether up to four 2.3kg tools

• 3103: Accessory Kit - Detachable

Loops (3-pack)

• 3755: Self-Adhering Tape Trap

requires no heat

• 3102F(x): Detachable Single Carabiner

Kit includes:

• 3103: Accessory Kit - Detachable

Loops (3-pack)

• 3755: Self-Adhering Tape Trap

requires no heat

• 3102F(x): Detachable Single Carabiner

Part no: 19651

Power Tool Tethering Kit 3191

Part no: 19651

Tether one standard cordless power tool

Power Tool Tethering Kit 3191

Kit includes:

Tether one standard cordless power tool

• 3780L: Power Tool Trap (Large)

• 3100F(x): Tool Lanyard Single

Carabiner

Kit includes:

• 3780L: Power Tool Trap (Large)

3193

• 3100F(x): Tool Lanyard Single

Carabiner

Part no: 19661

1.4kg Wrist Lanyard Tethering Kit 3192

Tether up to four 1.4kg tools

Kit includes:

Part no: 19661

Part no: 19662

Tether up to three 4.5kg tools

4.5kg Tool Tethering Kit 3182

Kit includes:

• 3713: Elastic Loop Tool Tails Swivel

• 3755: Self-adhering tape trap

requires no heat

• 3100F(x): Tool Lanyard Single Carabiner

Tether up to three 4.5kg tools

Kit includes:

• 3713: Elastic Loop Tool Tails Swivel

• 3755: Self-adhering tape trap

requires no heat

• 3100F(x): Tool Lanyard Single Carabiner

Tether up to four 1.4kg tools

Part no: 19652

Kit includes:

www.pryme.com.au | sales@pryme.net.au | 07 3374 4544

4.5kg Tool Tethering Kit 3182

Part no: 19652

1.4kg Wrist Lanyard Tethering Kit 3192

• 3103: Accessory Kit - Detachable

Loops (3-pack)

• 3755: Self-adhering tape trap

requires no heat

• 3116: Pull-On Wrist Lanyard with Buckle

• 3103: Accessory Kit - Detachable

Loops (3-pack)

• 3755: Self-adhering tape trap

requires no heat

• 3116: Pu l-On Wrist Lanyard with Buckle

Part no: 19662

www.pryme.com.au | sales@pryme.net.au | 07 3374 4544

www.pryme.com.au

sales@pryme.com.au

07 3374 4544

1 2 3 4

IDENTIFY

TRAP

TETHER

CONNECT

WHAT PRODUCT YOU WANT

TO SECURE AND HOW

5kg

4kg

0.9kg

5kg

CREATE A CONNECTION/

TRAP POINT

Trapping refers to retrofitting a

connection point onto a tool for

a more secure attachment.

LINK THE TRAP POINT

BETWEEN YOU AND THE TOOL

Once all tools have a connection

point the appropriate tethering

solution can be selected.

Consider the following factors to

select the appropriate solution:

weight of tool, type of connector(s)

on lanyard, clearance, reach,

and snag hazard.

SECURING THE TETHERING

DEVICE TO A DETERMINED

ANCHOR POINT

As a final step, it is imperative

to connect to a determined and

secure anchor point. This could

be a tool belt, topping bucket,

bag, or by using an approved

static anchor point.

3100F(X)

=

3780L

SQUIDS 3191

4 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


SQUIDS

TOOL TETHERING KITS

Ergodyne is your goto

source for safely and

efficiently securing your

objects at heights. We are

dedicated to keeping workers

safe and productive on the

job. Effectively securing

objects at heights is a 4-step

process and involves three

key product types: traps,

lanyards, and connectors.

NOT SURE

WHICH KIT

TO GRAB?

Jump online to use our Tool

Tethering Application. Select

which tool you want to tether,

follow the steps, and we'll

show you the best kit to use.

WWW.PRYME.COM.AU/TOOL-TETHERING-SOLUTIONS

PRYME.COM.AU

5


SQUIDS

TOOL TETHERING KITS

0.9KG TOOL TETHERING KIT

2.3KG TOOL TETHERING KIT

Tether up to six 0.9kg tools 3180

Kit includes:

• 3700: 4.5” (11.5cm) web tool tails (6 pack)

• 3755: self-adhering tape trap requires no heat

• 3130S: coiled lanyard design prevents snagging

• Approved to the ANSI/ISEA 121-2018 standard

Part No. Description UOM

19650 3180 Kit 1 Unit

4.5KG TOOL TETHERING KIT

0.9kg

Tether up to four 2.3kg tools 3181

Kit includes:

• 3103: accessory kit - detachable loops (3-pack)

• 3755: self-adhering tape trap requires no heat

• 3102F(x): detachable single carabiner

• Approved to the ANSI/ISEA 121-2018 standard

Part No. Description UOM

19651 3181 Kit 1 Unit

TAPE MEASURE TETHERING KIT

2.3kg

Tether up to three 4.5kg tools 3182

Kit includes:

• 3713: elastic loop tool tails swivel (3-pack)

• 3755: self-adhering tape trap requires no heat

• 3100F(x): tool lanyard single carabiner

• Approved to the ANSI/ISEA 121-2018 standard

Part No. Description UOM

19652 3182 Kit 1 Unit

4.5kg

Tether one standard tape measure 3190/93

Both kits include:

• 3770: Tape measure trap

• Approved to the ANSI/ISEA 121-2018 standard

3190: 3130S: Coiled lanyard prevents snagging

3193: 3100F(x): Tool lanyard single carabiner

Part No. Description UOM

19660 3190 Kit 1 Unit

19663 3193 Kit 1 Unit

0.9kg

6 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


POWER TOOL TETHERING KIT

WRIST LANYARD TETHERING KIT

KIT INCLUDES: 3191

KIT INCLUDES: 3192

• 3780L: power tool trap (large)

• 3100F(x): tool lanyard single carabiner

• Approved to the ANSI/ISEA 121-2018 standard

2.7kg

• 3103: accessory kit - detachable loops (3pack)

• 3755: self-adhering tape trap requires no heat

• 3116: pull-on wrist lanyard with buckle

• Approved to the ANSI/ISEA 121-2018 standard

1.4kg

Part No. Description UOM

Part No. Description UOM

19661 3191 Kit 1 Unit

19662 3192 Kit 1 Unit

SCREWDRIVER TETHERING

PHONE TETHERING KIT

KIT INCLUDES: 3194

KIT INCLUDES: 3195

• 3740: Variety Pack tethers small hand tools

• 3156: Coil Low Profile Lanyard – Carabiner

• Approved to the ANSI/ISEA 121-2018 standard

0.5kg

• 3760: Plus attached to cell phones

• 3156: Coil Low Profile Lanyard – Carabiner

• Approved to the ANSI/ISEA 121-2018 standard

0.9kg

Part No. Description UOM

Part No. Description UOM

19664 3194 Kit 1 Unit

19665 3195 Kit 1 Unit

PRYME.COM.AU

7


SQUIDS

TOOL TRAPS

ATTACHMENT SERIES (HAND TOOLS)

SECURE CONNECTION

FULLY ENCLOSED ATTACHMENT POINTS

VARIETY OF SIZES

FITS MULTIPLE HAND TOOLS

3740

FRICTION GRIP HOLD

NO ADHESIVES OR HEAT REQUIRED TO APPLY

EASY INSTALLMENT

IN ONE TO TWO STEPS

VERSATILE

8 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


HAND TOOL TRAP - SLIPS

WEB TOOL TAILS 6-PACK

See left hand page for examples

KIT INCLUDES: 3740

• Approved to the ANSI/ISEA 121-2018 standard

• ABS plastic outer ring for strength and durability

• Flexible inner core grips tool after application

• Swivelling ABS connecting ring for tethering

• One-piece, one-step attachment onto hand tools

• Fits tools 0.035” to 0.40”

• One time use, replace after removed

Part No. Description UOM

19740 S | 4-pack 6 Units

19741 M | 4-pack 6 Units

19742 L | 4-pack 6 Units

19743 XL | 4-pack 6 Units

19744 Variety Pack (all 4 Sizes) 6 Units

ELASTIC TOOL TAILS 3-PACK

Available in four sizes

0.45kg

KIT INCLUDES: 3700

• Approved to the ANSI/ISEA 121-2018 standard

• Ultra strength nylon webbing

• Fully enclosed plated D-ring for secure attachment

• High tensile strength nylon thread

• Web catch with double stitch for more durable

stopping point

• Available in five colour-coded lengths

• Third-party tested using a 2:1 safety factor

Used with tape traps; creates retrofit tether point

Part No. Description UOM

19701 Variety (all 5 sizes) 6 Units

19703 9cm | 6-pack 6 Units

19704 11.5cm | 6-pack 6 Units

19705 14cm | 6-pack 6 Units

19706 16.5cm | 6-pack 6 Units

19708 21.5cm | 6-pack 6 Units

DETACHABLE LOOPS

0.9kg

3703

3713

KIT INCLUDES: 3703/13

• Approved to the ANSI/ISEA 121-2018 standard

• Stretch cord surrounded by tubular nylon webbing

• Use with tool trap to create retrofit tether point

• Adjustable barrel lock for tool attachment

• Fully enclosed plated O-ring for secure attachment

• Doubles as an anchor loop for belt, harness or

separate structure

• Standard length: 38cm | 3703 Extended length: 46cm

• Third-party tested using a 2:1 safety factor

Part No. Description UOM

19765

19767

19769

3713: Lime with swivel | 38cm |

4.6kg | 3-pack

3703: Lime | 38cm | 6.8kg |

3-pack

3703: Lime | 46cm | 6.8kg |

3-pack

6 Units

6 Units

6 Units

4.5kg

6.8kg

KIT INCLUDES: 3103

• Approved to the ANSI/ISEA 121-2018 standard

• Adjustable barrel lock for tool attachment

• Modular quick connecting buckle

for exchanging multiple tools

• Compatible with 3102: Detachable Tool Lanyard

• Length: 32cm

• Third-party tested using a 2:1 safety factor

Part No. Description UOM

19068 Black | 32cm | 2.3kg | 3-pack 6 Units

19069 Lime | 32cm | 2.3kg | 3-pack 6 Units

2.3kg

PRYME.COM.AU

9


ACCESSORY ANCHOR

COLD SHRINK TRAP

Available in three sizes

KIT INCLUDES: 3175

• Approved to the ANSI/ISEA 121-2018 standard

• Heavy-duty 45mm polyester webbing

• Nickel-plated iron D-ring

• 840D nylon wear protector sleeve

• Not for climbing or fall arrest

• Length 23.5in (60cm)

• Static anchor maximum safe

working capacity: 181kg

• Tool Tail maximum safe working capacity: 18kg

Part No. Description UOM

19175 Accessory Anchor | Black 6 Units

TOOL SHACKLE TRAPS

18kg

181kg

KIT INCLUDES: 3723/24/26

• Approved to the ANSI/ISEA 121-2018 standard

• Fits tool diameter range of 1.9 - 6.4cm

• 3M Cold Shrink technology requires no heat source

• No additional tools needed to ensure a secure

connection on tool

•EPDM rubber material resists acids, alkalies and

extreme temps

• Third-party tested using a 2:1 safety factor

Part No. Description UOM

19723

19724

19726

3723 | Shrink Trap | 7.6cm |

2kg

3724 | Shrink Trap | 10.1cm

| 4.5kg

3726 | Shrink Trap | 15.2cm

| 6.8kg

6 Units

6 Units

6 Units

2.0kg

6.8kg

4.5kg

SELF-ADHERING TAPE TRAP

Available in four sizes

KIT INCLUDES: 3790

• Approved to the ANSI/ISEA 121-2018 standard

• Requires no heat source for application

• No adhesives so it can be removed with no mess

• Fibreglass reinforcement for added durability

• Provides added grip to the handle of a tool

• Third-party tested using a 2:1 safety factor

• Cut & puncture resistant

Used with tool tail; creates retrofit tether point

Part No. Description UOM

19792 Shackle | S | 6.8kg | 2-pack 6 Units

19793 Shackle | M | 6.8kg | 2-pack 6 Units

19794 Shackle | L | 6.8kg | 2-pack 6 Units

19795 Shackle | XL | 6.8kg | 2-pack 6 Units

6.8kg

KITS INCLUDE: 3755

• Approved to the ANSI/ISEA 121-2018 standard

• Requires no heat source for application

• No adhesives so it can be removed with no mess

• Fibreglass reinforcement for added durability

• Provides added grip to the handle of a tool

• Third-party tested using a 2:1 safety factor

• Cut & puncture resistant

Used with tool tail; creates retrofit tether pointbiner

Part No. Description UOM

19755 Grey | 3.7m x 2.5cm | 4.5kg 6 Units

19756 Orange | 3.7m x 2.5cm | 4.5kg 6 Units

4.5kg

10 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


PRYME.COM.AU

11


SQUIDS

TOOL TRAPS

ATTACHMENT SERIES (INSTRUMENTS ETC.)

SECURE CLOSURES

HOLD CELLPHONES AND

OTHER INSTRUMENTS

PATENTED DESIGNS

ALLOW FOR FULL FUNCTIONING OF YOUR

INSTRUMENTS AND DO NOT IMPEDE THEIR USE

DURABLE AND

RESISTANT

DEVICES AND INSTRUMENTS COVERED

IN PROTECTIVE MATERIALS

3760

REINFORCED

MATERIALS

PASS STRINGENT DROP

TESTING REQUIREMENTS

3110F(X)

PRYME TIP:

Always choose a Shock Absorbing SQUIDS lanyard

12 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


CELLPHONE TRAP - SLEEVE

TABLET TRAP - SLEEVE

KIT INCLUDES: 3760

KIT INCLUDES: 3765

• Approved to the ANSI/ISEA 121-2018 standard

• Water-resistant primary material

• Clear touch screen window

• Steel grommet for tool lanyard attachment

• Zipper closure secures cellphone

• Standard size fits regular iPhones, Samsung, and

LG cellphones

• Plus size fits iPhone+, Samsung, and LG

cellphones

• Max tethering capacity of 1lbs. (0.5kg)

Part No. Description UOM

19762 Standard | Clear | 0.5kg 6 Units

19763 Plus | Clear | 0.5kg 6 Units

0.5kg

• Approved to the ANSI/ISEA 121-2018 standard

• Water-resistant primary material

• Clear touch screen window

• Steel grommet for tool lanyard attachment

• Zipper closure secures tablet

• Fits most standard tablets

• Max tethering capacity of 2lbs. (0.9kg)

Part No. Description UOM

19764 Standard | Clear | 0.9kg 6 Units

0.9kg

WATER BOTTLE / CANISTER TRAP - SLEEVE

TAPE MEASURE TRAP

KIT INCLUDES: 3770

KITS INCLUDE: 3775

• Approved to the ANSI/ISEA 121-2018 standard

• Polyester primary material

• Hook & loop straps secure tape measure

• Stainless steel belt clip

• Zinc-plated cast D-Ring

• Third-party tested using a 2:1 safety factor

• Large fits tape measures from 16’-25’ (5m-8m)

• XL fits tape measures from 30’-35’ (9m-10m)

0.9kg

• Approved to the ANSI/ISEA 121-2018 standard

• Neoprene primary material

• Stainless steel belt clip

• Zinc-plated cast D-ring

• Adjustable buckle closure for security

• Fits standard 0.5L water bottles

• Maximum tethering capacity of 2lbs. (0.9kg)

0.9kg

Part No. Description UOM

19770 L | Orange | 0.9kg 6 Units

Part No. Description UOM

19775

Water Bottle / Canister Sleeve |

Black | 0.9kg

6 Units

PRYME.COM.AU

13


SQUIDS

TOOL TRAPS

ATTACHMENT SERIES (INSTRUMENTS ETC.)

14 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


WIRE LOOP TOOL TAILS

WIRE SCREWGATE TOOL TAILS

KIT INCLUDES: 3704

• Approved to the ANSI/ISEA 121-2018 standard

• Orange PU coating for protection

• Designed to safely tether small captive holes

on tools

• Extended length – 6in. (15cm)

• Copper termination ends

• One-step retrofit attachment point

• Maximum tethering capacity of 2lbs. (0.9kg)

Part No. Description UOM

19707 Loop Tool Tail | 0.9kg | 6-pack 6 Units

0.9kg

KIT INCLUDES: 3705

• Approved to the ANSI/ISEA 121-2018 standard

• Stainless-steel cable wire is corrosion resistant

• Orange PU coating for protection

• Copper termination ends

• Designed to safety tether small captive holes on tools

• Extended length – 6in. (15cm)

• Maximum tethering capacity of 3lbs. (1.4kg)

Part No. Description UOM

19709

Screw Gate Tool Tail | 1.4kg |

6-pack

6 Units

1.4kg

PRYME.COM.AU

15


SQUIDS

TOOL TRAPS

ATTACHMENT SERIES (POWER TOOLS)

PATENTED DESIGNS

ALLOW USER TO INSTALL ATTACHMENTS ON POWER

TOOLS WITHOUT CHANGING THE TOOL’S INTEGRITY

3797

MULTIPLE STYLES

FOR A VARIETY OF POWER TOOLS

STAINLESS STEEL

HARDWARE

RESISTANT TO THE

ELEMENTS ON THE JOB

3796 POWER TOOL TRAP TM

Drill/Impact Driver Bracket

3797 POWER TOOL TRAP TM

Grinder Bracket

3798 POWER TOOL TRAP TM

Pneumatic Bracket

16 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


POWER TOOL TRAP -

DRILL/IMPACT DRIVER BRACKET

POWER TOOL TRAP - GRINDER BRACKET

KIT INCLUDES: 3796

• Approved to the ANSI/ISEA 121-2018 standard

• For installation on drills/drivers to create a tether point

• Stainless steel bracket and fasteners for application

• Versatile design attaches to a variety of tools

• Set comes with bracket, 7 fasteners & washers

and two labels

• Max capacity is 2.5lbs (1.13kg) with M2.5 fastener

and 3lbs (1.36kg) with M3 and M4 fastener

• Fits M2.5, M3.0, M4.0 screw ports on tools

Part No. Description UOM

19796 Drill Bracket | Stainless Steel 6 Units

1.4kg

POWER TOOL TRAP - PNEUMATIC BRACKET

KIT INCLUDES: 3797

• Approved to the ANSI/ISEA 121-2018 standard

• For installation on grinders to create a tether point

• Stainless steel bracket and fasteners for application

• Versatile design attaches to a variety of grinders

• Set comes with bracket, 2 fasteners

& washers and label

• Max capacity is 8lbs (3.63kg)

• Fits M8 and M10 screw ports on tools

Part No. Description UOM

19797 Grinder Bracket | Stainless Steel 6 Units

POWER TOOL TRAP - BATTERY WRAP

3.6kg

KIT INCLUDES: 3780

KIT INCLUDES: 3798

• Approved to the ANSI/ISEA 121-2018 standard

• For installation on grinders to create a tether point

• Stainless steel bracket attaches to hose coupler

• Design allows attachment to swivel when tethered

• Set comes with bracket and a label

• Max capacity is 5lbs (2.26kg)

• Fits 3/8” and 1/4” couplers

Part No. Description UOM

19798

Pneumatic Bracket

| Stainless Steel

6 Units

2.3kg

• Approved to the ANSI/ISEA 121-2018 standard

• 1000D nylon with water-resistant backing

• Hook & loop straps secure power tool battery

• Nickel-plated cast D-ring

• Prevents power tool and battery from

becoming a dropped object

• Large size to fit batteries up to

L:12.5cm x W:9cm x H:9cm

• Small size to fit batteries up to

L:9cm x W:7cm x H:6.5cm

• Third-party tested using a 2:1 safety factor

Part No. Description UOM

19784 Battery Wrap | Black | L | 4.5kg 6 Units

19782 Battery Wrap | Black | S | 2.7kg 6 Units

4.5kg

2.7kg

PRYME.COM.AU

17


SQUIDS

TOOL TETHERING

LANYARD SERIES (TOOL & EQUIPMENT)

SHOCK-ABSORBING

PROPERTIES

DURABLE

LANYARD BODY

3100F(X)

CAPTIVE EYE

CARABINERS

3704

CARABINER VARIETY

AND SECURITY

THIRD-PARTY CERTIFIED

WEIGHT RATINGS

18 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


TOOL LANYARD SINGLE CARABINER

TOOL LANYARD DUAL CARABINER

KEY FEATURES:

• Approved to the ANSI/ISEA 121-2018 standard

• Durable 1680D shock-absorbing poly webbing

• Aluminium alloy carabiner with locking screw-gate

and captive eye

• Threaded loop end that grips the tool when attached

• Low-profile lightweight design reduces snag hazards

• Third-party tested using a 2:1 safety factor

• Lanyard size: 96cm - 122cm

Part No. Description UOM

19802 Lanyard | Orange/Grey 6 Units

3100F(X)

4.5kg

TOOL LANYARD SINGLE-LOCKING CARABINER

KEY FEATURES:

• Approved to the ANSI/ISEA 121-2018 standard

• Durable 1680D shock-absorbing poly webbing

• Aluminium alloy carabiner with locking screw-gate

and captive eye

• Carabiners designed for gloved hands

• Low-profile lightweight design reduces snag hazards

• Third-party tested using a 2:1 safety factor

• Lanyard size: 96cm - 122cm

Part No. Description UOM

19822 Lanyard | Orange/Grey 6 Units

3110F(X)

4.5kg

TOOL LANYARD DUAL-LOCKING CARABINER

KEY FEATURES:

• Approved to the ANSI/ISEA 121-2018 standard

• Durable 1680D shock-absorbing poly webbing

• Double-action aluminium carabiner with captive eye

• Treaded loop end that grips the tool when attached

• Low-profile lightweight design reduces snag hazards

• Third-party tested using a 2:1 safety factor

• Lanyard size: 96cm - 123cm

Part No. Description UOM

19808 Lanyard | Orange/Grey 6 Units

3108F(X)

6.8kg

KEY FEATURES:

• Approved to the ANSI/ISEA 121-2018 standard

• Durable 1680D shock-absorbing poly webbing

• Double-action aluminium carabiner with captive eye

• Carabiners designed for gloved hands

• Low-profile lightweight design reduces snag hazards

• Third-party tested using a 2:1 safety factor

• Lanyard size: 96cm - 123cm

Part No. Description UOM

19828 Lanyard | Orange/Grey 6 Units

3118F(X)

6.8kg

PRYME.COM.AU

19


SQUIDS

TOOL TETHERING

LANYARD SERIES (TOOL & EQUIPMENT)

TOOL LANYARD SINGLE SWIVELLING

LOCKING CARABINER

TOOL LANYARD DUAL SWIVELLING

LOCKING CARABINER

KEY FEATURES:

• Approved to the ANSI/ISEA 121-2018 standard

• Durable 1680D shock-absorbing poly webbing

• Double-action aluminium carabiner with captive eye

• Treaded loop end grips the tool when attached

• Lightweight design reduces snag hazards

• Swivelling carabiners eliminate binding and snags

• Third party certified to a 11.3kg maximum

capacity with 2:1 safety factor

• Lanyard size: 96cm -122cm

Part No. Description UOM

19809 Lanyard | Orange/Grey 6 Units

3109F(X)

SS SCREWGATE CARABINER LANYARD

KEY FEATURES:

• Approved to the ANSI/ISEA 121-2018 standard

• Durable 1680D shock-absorbing poly webbing

• Double-action aluminium carabiner with captive eye

• Carabiners designed for gloved hands

• Lightweight design reduces snag hazards

• Swivelling carabiners eliminate binding and snags

• Third party certified to a 11.3kg maximum

capacity with 2:1 safety factor

• Lanyard size: 96cm - 122cm

Part No. Description UOM

19829 Lanyard | Orange/Grey 6 Units

3119F(X)

SS SCREWGATE TRIPLE CARABINER - TWINLEG

KEY FEATURES: 3111

• Energy-absorbing cord with tubular-nylon webbing

• Manual-locking stainless steel carabiners (#304)

• Reflective accent for higher visibility

• Lock stitching at both ends for extra security

• Third-party tested using a 2:1 safety factor

• Standard lanyard size: 89cm - 110cm

• Extended lanyard size: 110cm - 140cm

Part No. Description UOM

19027 Standard Lanyard | HV Lime 6 Units

19037 Extended Lanyard | HV Lime 6 Units

6.8kg

KEY FEATURES: 3311

• Energy-absorbing cord with tubular-nylon webbing

• Manual-locking stainless steel carabiners (#304)

• Twin leg for two tools or 100% tie-off of one tool

• Reflective accent for higher visibility

• Lock stitching at both ends for extra security

• Third-party tested using a 2:1 safety factor

• Standard lanyard size: 89cm - 107cm

Part No. Description UOM

19083 Standard Lanyard | HV Lime 6 Units

6.8kg

20 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


WRIST TOOL LANYARD

PULL-ON WRIST TOOL LANYARD - CARABINER

KEY FEATURES: 3115

KEY FEATURES: 3114

• Approved to the ANSI/ISEA 121-2018 standard

• Polyester webbing cuff secures to wrist

• Energy-absorbing ribbed pull cord

• Adjustable barrel lock for tool attachment

• Approved to the ANSI/ISEA 121-2018 standard

• Elastic maintains snug fit

• Pull-on design provides easy on/off

• One-size-fits-all

• Short length improves the drop clearance needed

• Stainless steel (#304) carabiner

1.4kg

0.9kg

• Wrist Measurement: S/M 5” – 7” (13cm – 18cm)

• Tuck-away pocket to keep connector when not in use

• Wrist Measurement: L/XL 7” – 8½” (18cm – 22cm)

Part No. Description UOM

Part No. Description UOM

19056 Wrist Lanyard | Black 6 Units

19042 Wrist Lanyard S/M 6 Units

19052 Wrist Lanyard L/XL 6 Units PRYME TIP:

TOOL LANYARD SINGLE CARABINER - MODULAR

Not all tool lanyards are created equal.

Always select a Shock Absorbing SQUIDS F(x) Tool Lanyard.

SQUIDS F(x) Tool Lanyards feature shock aborbing poly webbing

that limit the drop forces on workers at heights.

These next generation SQUIDS F(x) Tool Lanyards increase both the

safety and efficency of workers at heights.

KEY FEATURES:

•Approved to the ANSI/ISEA 121-2018 standard

• Durable 1680D shock-absorbing poly webbing

• Aluminium alloy carabiner with locking screw-gate

and captive eye

• Threaded loop end grips the tool when attached

• Lightweight design reduces snag hazards

• Modular buckle for quickly exchanging tools

• Third-party tested using a 2:1 safety factor

• Lanyard size: 96cm - 122cm

Part No. Description UOM

19864 Lanyard | Orange/Grey 6 Units

3102F(X)

2.3kg

PRYME.COM.AU

21


SQUIDS

TOOL TETHERING

LANYARD SERIES (TOOL & EQUIPMENT)

Drop

Force

READING

SQUIDS ®

Drop

Force

READING

OTHER GUYS

SQUIDS ®

NEXT GENERATION

SHOCK ABSORBING

LANYARDS

Ergodyne Squids ® Tool Lanyards are

scientifically engineered to reduce drop

forces and prevent workers from being

pulled down when they drop an object.

The other guys? Not so much.

22 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


TOOL LANYARD DUAL CARABINER

SS SCREWGATE CARABINER LANYARD

KEY FEATURES: 3110

• Energy-absorbing cord with tubular-nylon webbing

• Single-action aluminium carabiner

• Reflective accent for higher visibility

• Lock stitching at both ends for extra security

• Third-party tested using a 2:1 safety factor

• Standard lanyard size: 89cm - 107cm

• Extended lanyard size: 107cm - 137cm

Part No. Description UOM

19022 Standard Lanyard | Black 6 Units

19032 Extended Lanyard | Black 6 Units

19023 Standard Lanyard | HV Lime 6 Units

19033 Extended Lanyard | HV Lime 6 Units

COIL TOOL LANYARD

4.5kg

KEY FEATURES: 3101

• Energy-absorbing cord with tubular-nylon webbing

• Manual-locking stainless steel carabiners (#304)

• Reflective accent for higher visibility

• Lock stitching at both ends for extra security

• Third-party tested using a 2:1 safety factor

• Standard lanyard size: 89cm - 107cm

• Extended lanyard size: 107cm - 137cm

Part No. Description UOM

19007 Standard Lanyard | HV Lime 6 Units

19017 Extended Lanyard | HV Lime 6 Units

COIL TOOL LANYARD

6.8kg

KEY FEATURES:

• Approved to the ANSI/ISEA 121-2018 standard

• Constructed with PU-covered aircraft cable

• Stainless steel carabiners (#304)

• Coil design prevents snag and tangle hazards

• Swivelling design prevents tangles and fast recoil

• Extended length 48” (123cm)

Part No. Description UOM

19130 Coil Lanyard | S 6 Units

3130S

0.9kg

KEY FEATURES:

• Approved to the ANSI/ISEA 121-2018 standard

• Constructed with PU-covered aircraft cable

• Stainless steel carabiners (#304)

• Coil design prevents snag and tangle hazards

• Swivelling design prevents tangles and fast recoil

• Extended length 48” (123cm)

Part No. Description UOM

19131 Coil Lanyard | M 6 Units

3130M

2.3kg

PRYME.COM.AU

23


SQUIDS

TOOL TETHERING

LANYARD SERIES (TOOL & EQUIPMENT)

HD LANYARD SINGLE CARABINER

HD LANYARD DUAL CARABINER

KEY FEATURES: 3129

• Approved to the ANSI/ISEA 121-2018 standard

• Durable 1000D poly webbing

• Double-action aluminium carabiner with captive eye

• Treaded loop end grips the tool when attached

• Swivelling carabiners eliminate binding and snags

• Heavy-duty design tethers tools up to 40lbs (18kg)

• Third-party tested using a 2:1 safety factor

• Lanyard size: 193cm

Part No. Description UOM

19137 Lanyard | Black 6 Units

18kg

KEY FEATURES: 3139

• Approved to the ANSI/ISEA 121-2018 standard

• Durable 1000D poly webbing

• Double-action aluminium carabiner with captive eye

• Carabiners designed for gloved hands

• Swivelling carabiners eliminate binding and snags

• Heavy-duty design tethers tools up to 40lbs (18kg)

• Third-party tested using a 2:1 safety factor

• Lanyard size: 193cm

Part No. Description UOM

19139 Lanyard | Black 6 Units

18kg

COIL LOW PROFILE LANYARD - CARABINER

COIL LOW PROFILE LANYARD - DUAL CARABINER

KEY FEATURES: 3156

• Approved to the ANSI/ISEA 121-2018 standard

• Low-profile, durable plastic coil

• Easily attaches to hard hats and other small tools

• Coil design prevents snag and tangle hazards

• Aluminium alloy carabiner with captive eye

• Lanyard size: 30.5cm - 123cm

Part No. Description UOM

19161 LP Lanyard | Grey 6 Units

0.9kg

KEY FEATURES: 3166

• Approved to the ANSI/ISEA 121-2018 standard

• Low-profile, durable plastic coil

• Easily attaches to hard hats and other small tools

• Coil design prevents snag and tangle hazards

• Aluminium alloy carabiner with captive eye

• Lanyard size: 30.5cm - 123cm)

Part No. Description UOM

19162 Lanyard | Grey 6 Units

0.9kg

24 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


PRYME.COM.AU 25


SQUIDS

TOOL TETHERING

LANYARD SERIES (HARD HATS)

PRYME TIP:

Chin straps are a very uncomfortable way to secure a

hard hat – workers prefer SQUIDS hard hat lanyards

EASILY ATTACHES

TO HARD HATS AND OTHER HEAD

WEAR

3155

COMFORTABLE

HIGH-STRETCH ELASTIC MATERIAL

QUICK-CONNECT CLAMP

ATTACHES SECURELY TO FABRIC

26 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


ELASTIC LOW PROFILE LANYARD - CLAMP

ELASTIC LOW PROFILE LANYARD - BUCKLE

KEY FEATURES: 3155

KEY FEATURES: 3150

• Comfortable, high-stretch elastic material

• Easily attaches to hard hats and other head wear

• Quick-connect clamp attaches securely to fabric

• Lanyard size: 58cm - 123cm

0.9kg

• Comfortable, high-stretch elastic material

• Easily attaches to hard hats and other head wear

• Double-lock plastic buckle attaches to harness

• Lanyard size: 55cm - 123cm

0.9kg

Part No. Description UOM

19155 LP Lanyard | HV Lime 24 Units

Part No. Description UOM

19150 LP Lanyard | HV Lime 6 Units

COIL LOW PROFILE LANYARD - CLAMP

COIL LOW PROFILE LANYARD - CARABINER

KEY FEATURES: 3158

• Low-profile, durable plastic coil

• Easily attaches to hard hats and other small tools

• Coil design prevents snag and tangle hazards

• Quick-connect clamp attaches securely to fabric

• Lanyard size: 30.5cm - 123cm

Part No. Description UOM

19159 LP Lanyard | HV Lime 6 Units

0.9kg

KEY FEATURES: 3156

• Approved to the ANSI/ISEA 121-2018 standard

• Low-profile, durable plastic coil

• Easily attaches to hard hats and other small tools

• Coil design prevents snag and tangle hazards

• Aluminium alloy carabiner with captive eye

• Lanyard size: 30.5cm - 123cm

Part No. Description UOM

19161 LP Lanyard | Grey 6 Units

0.9kg

PRYME.COM.AU

27


SQUIDS

TOOL TETHERING

RETRACTOR SERIES (TOOL & EQUIPMENT)

LOCKING CARABINERS

THAT SWIVEL FOR SECURE ATTACHMENT

AND SMOOTH FUNCTION

MULTIPLE WAYS

TO ANCHOR RETRACTABLES

INCLUDING CARABINERS AND

WEB SLOTS

DURABLE

HOUSINGS PROTECT THE INTERNAL

WORKS OF THE RETRACTABLE

LIGHTWEIGHT AND

CUT RESISTANT

CORDS HOLD UP IN TOUGH

ENVIRONMENTS

28 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


ELASTIC LOW PROFILE LANYARD - CLAMP

RETRACTABLE TOOL LANYARD - LOOP

3000

3001

KEY FEATURES: 3000 / 01

• Approved to the ANSI/ISEA 121-2018 standard

• Self-setting pawls set desired lanyard length

• Modular connecting buckle for exchanging tools

• Plated swivelling ring for 360˚ rotation

• Loop and manual-locking stainless carabiner (#304)

• Technora cord for ultimate strength and durability

• Extendable length up to 48in (123cm)

Part No. Description UOM

19300

19301

Retractable Lanyard Dual

Carabiner | 0.5kg

Retractable Lanyard Single

Carabiner and Loop | 0.9kg

6 Units

6 Units

0.9kg

0.5kg

KEY FEATURES: 3010

• Approved to the ANSI/ISEA 121-2018 standard

• Durable ABS plastic housing for extreme durability

• Double-locking carabiner for secure attachment

• Web slot to be threaded on a belt for anchoring

• Lightweight cord is durable and cut resistant

• Extendable length up to 48in (123cm)

Part No. Description UOM

19310

Retractable Lanyard Single

Carabiner | 2.3kg

RETRACTABLE TOOL TAILS

6 Units

2.3kg

RETRACTABLE TOOL LANYARD - DUAL CARABINER

3026

3025

KEY FEATURES: 3025 / 26

KEY FEATURES: 3011

• Approved to the ANSI/ISEA 121-2018 standard

• Durable ABS plastic housing for extreme durability

• Dual double-locking carabiners for secure attachment

• Built-in swivel to prevent tangles and binds

• Lightweight cord is durable and cut resistant

• Extendable length up to 48in (123cm)

Part No. Description UOM

3.6kg

• Compatible with 3000/3001 Retractable Lanyard

• Modular connecting buckle for exchanging tools

• 3025: Manual-locking stainless steel carabiner (#304)

• 3026: Loop for tool attachment

Part No. Description UOM

19325 Extra Tails with Carabiner | 0.5kg 6 Units

19326 Extra Tails with Loop | 0.9kg 6 Units

0.9kg

0.5kg

19311

Retractable Lanyard Dual

Carabiner | 3.6kg

1 Unit

PRYME.COM.AU

29


SQUIDS

GRABBER & TIE HOOK

GRABBER COLOURS:

Deep Blue

Metal Detectable

Red

Orange

Yellow

Black

Blue

GRABBER - DUAL CLIP OR BELT CLIP MOUNT

3405

3400

3405

BREAKAWAY DESIGN

INDEPENDENT OPERATION

MODULAR ANCHORING OPTIONS

KEY FEATURES: 3400 / 05

TIE HOOK - LOCKING HOOK

KEY FEATURES: 3540

• Large locking hook with 360° swivel (38mm)

• Reusable sliding belt lock mechanism

• High tensile strength, weather resistant nylon 66

• Hi-vis orange colour

• Excellent resistance to oil, salt, solvents, and alkali

• Temp range: – 40°C – 80°C

• Recommended load limit: 44lbs (19.9kg)

Part No. Description UOM

33402 Small: 30cm | 19.9kg 6 Units

33403 Locking hook | M | 40cm | 19.9kg 6 Units

33404 Large: 50cm | 19.9kg 6 Units

19.9kg

• Clips to clothing, belts, webbing and D-rings

• Holds PPE, tools, accessories, and other items

• Prevents dropped objects and foreign material

• Dielectric / non-conductive material

• Durable, ultra-resilient acetal copolymer

• 100 Packs available for better pricing on 3400

dual clip mounts

Part No.

Description

3400 | Dual clip mount

Part No.

100 Pack #

UOM

19112 Dual Clip | Black 19112-Bulk 6 Units

19113 Dual Clip | Red 19113-Bulk 6 Units

19117 Dual Clip | Blue 19117-Bulk 6 Units

19118 Dual Clip | Orange 19118-Bulk 6 Units

19119 Dual Clip | Lime 19119-Bulk 6 Units

19132

3405 | belt Clip mount

Metal Detectable |

Deep Blue

6 Units

19122 Belt Clip | Black 6 Units

19123 Belt Clip | Red 6 Units

19127 Belt Clip | Blue 6 Units

19128 Belt Clip | Orange 6 Units

19129 Belt Clip | Lime 6 Units

19142 Metal Detectable | Deep Blue 6 Units

30 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


5-INCH PADDED AERIAL TOOL BELT

KEY FEATURES: 5555

• 1680D ballistic polyester

• Thick, vented foam padding for comfort

• Nickel-plated 2” double tongue metal roller buckle

• Nickel-plated grommets set firmly for durability

• Nickel-plated suspender anchors

Part No. Description UOM

13656 5-Inch Belt | Black | M 1 Unit

13657 5-Inch Belt | Black | L 1 Unit

13658 5-Inch Belt | Black | XL 1 Unit

13659 5-Inch Belt | Black | 2XL 1 Unit

COMFORTABLE,PADDED

TOOL BELT FOR EASY

RIG SUPPORT

PRYME.COM.AU

31


HOIST BUCKET SERIES

ARSENAL

TOOL TOPPING

THIRD-PARTY CERTIFIED

TO A 5:1 SAFETY FACTOR

HEAVY-GAUGE

STITCHING

PATENTED

SAFETY TOP

5960

DURABLE

FABRICS

REINFORCED

BOTTOM

32 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


CANVAS HOIST BUCKET WITH D-RINGS

LEATHER BOTTOM CANVAS

KEY FEATURES: 5960

KEY FEATURES: 5740

• 24oz canvas and synthetic leather bottom

• Reinforced webbing handle

• Three plated D-rings

• Third-party certified to a 5:1 safety factor

• Maximum safe working capacity of 68KG

• Maximum safe tethering anchor capacity

of 9kg on each d-ring

• Diameter: 32cm / Height: 43cm

Part No. Description UOM

14960 Hoist Bucket without Top 1 Unit

14938 Top of Bucket 1 Unit

68kg

20oz canvas and leather-reinforced base

• Nickel-plated swivel clip

• PP rope handle and interior pocket

• Third-party certified to a 4:1 safety factor

• Maximum safe working capacity of 68KG

• Diameter: 32cm / Height: 43cm

Part No. Description UOM

14440 Hoist Bucket without Top 1 Unit

14438 Top of Bucket 1 Unit

68kg

PRYME TIP:

Always use the patented safety top when lifting with Hoist Buckets

PRYME.COM.AU

33


BAG & ORGANISER SERIES

ARSENAL

GEAR & TOOL STORAGE

D-RINGS

FOR ATTACHMENT

OF TOOL LANYARDS

5843

DURABLE

FABRICS

HEAVY-DUTY

ZIPPERS

VARIETY OF

POCKETS

34 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


TOPPED PARTS POUCH

TOPPED PARTS POUCH

KEY FEATURES: 5528

KEY FEATURES: 5538

20oz water-resistant canvas

• Trap door closure for safety and security

• Two exterior tool loops

• Two exterior D-rings for tool lanyard attachment

• Third-party certified to a 4:1 safety factor

• Size: 19cm x 19cm x 30cm

9kg

• Waterproof tarpaulin material

• Trap door closure for safety and security

• Two exterior tool loops

• Two exterior D-rings for tool lanyard attachment

• Third-party certified to a 4:1 safety factor

• Size: 19cm x 19cm x 30cm

9kg

Part No. Description UOM

Part No. Description UOM

13628 5528 | Parts Pouch | Black | 9kg 1 Unit

13638 5538 | Parts Pouch | Orange | 9kg 1 Unit

PREMIUM TOPPED PARTS POUCH

TOOL BACKPACK

KEY FEATURES: 5527

KEY FEATURES: 5843

• 1680D ballistic polyester

• Snap-hinge closure for safety and security

• Two exterior D-rings for tool lanyard attachment

• Straps designed for quick attachment and removal

• Size: 25cm x 15cm x 29cm

9kg

• Tall tool holster on side panel

• Padded shoulder straps for increased comfort

• Reinforced comfort padding on the back

• 26 interior pockets and 7 exterior pockets

• Size: 34cm x 22cm x 61cm

22.6kg

Part No. Description UOM

Part No. Description UOM

13627 5527 | Parts Pouch | Orange | 9kg 1 Unit

13743 5843 | Parts Pouch | Black | 23kg 1 Unit

PRYME.COM.AU

35


EQUIPMENT

TRANSPORT 101

THE DO’S AND DON’TS OF DROPS

RISKS

ASSOCIATED WITH POOR EQUIPMENT TRANSPORTATION

SPRAINS OR STRAINS

Many times, workers try to carry all their tools and equipment

to heights in case they need something they don’t anticipate.

This can lead to them overloading themselves while climbing,

taking a toll on the body.

FATIGUE / EXHAUSTION

That toll may not lead to a muscle pull or strain, however trying

to carry too much up during a long climb on a hot day could

stress the body in other ways. Stress or exertion – coupled with

extreme conditions like heat – can be dangerous.

FALLING OBJECT / STRUCK-BY

Improperly carrying equipment to heights like holding tools

in your hands, slipping them into your pocket or not securing

them when hoisting can easily lead to those objects taking

a tumble below.

FALLS TO LOWER LEVEL

Too much weight on a worker can drag them down, not having

a lifting plan in place for hoisting can swing a load into someone,

or not storing equipment in an organized fashion while at height

can lead to trip hazards all causing a potential slip, trip or fall.

CERTIFIED EQUIPMENT

THERE ARE HUNDREDS OF BAGS, BUCKETS, POUCHES AND HOLSTERS OUT THERE, BUT YOUR STANDARD

19L BUCKET IS NOT GOING TO BE ENOUGH AT HEIGHTS. PORTABLE CONTAINERS THAT ARE HOISTED AND

STATIONARY CONTAINERS THAT ARE CARRIED SHOULD BE RATED.

STATIC TESTING

Portable and stationary containers

should be statically pulled or loaded

with a 5:1 safety factor.

INVERTED STATIC TESTING

Containers designed to carry contents

that cannot be tethered should have

a top or closure that is tested upside

down to a 2:1 safety factor.

DYNAMIC TESTING

Containers should have drop testing

conducted, as well including attachment

points meant to anchor lanyards.

36 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


BEST PRACTICES

• EQUIPMENT TRANSPORTATION BEST

PRACTICES TO MITIGATE THOSE RISKS.

• NEVER CARRY OBJECTS IN YOUR POCKETS

• ALWAYS MAINTAIN THREE POINTS

OF CONTACT (Never Carry a Container in your Hand)

• LIMIT THE WEIGHT ON A WORKER’S BODY

(Hoist, if possible)

• USE CONTAINERS WITH SECURE TOPS

AND/OR TETHERING ANCHOR POINTS

• USE MECHANICAL ADVANTAGE TO HOIST,

IF POSSIBLE

• HAVE A LIFT PLAN IN PLACE -

EVEN THOUGH A CRANE IS BEING USED

PRYME.COM.AU

37


EQUIPMENT

GUIDE

LANYARD AND SHACKLE GUIDE

Follow the tool lanyard selection guide to choose the right lanyard for the job.

CAPACITY LANYARD CONNECTORS

Model KGs Style Modular Single/Twin Leg Connector A Connector B Swivel

Material Connection Material Connection

3000 0.5 Retractable Yes Single Stainless Manual Lock Stainless Manual Lock Yes

3001 0.9 Retractable Yes Single Stainless Manual Lock Loop Choke Yes

3010 2.3 Retractable No Single Aluminium Auto Locking ABS Plastic Belt Loop Yes

3011 3.6 Retractable No Single Aluminium Auto Locking Aluminium Auto Locking Yes

3100 4.6 Shock Absorbing Elastic No Single Aluminium Non Locking Loop Choke No

3110 4.6 Shock Absorbing Elastic No Single Aluminium Non Locking Aluminium Non Locking No

3111 6.8 Shock Absorbing Elastic No Single Stainless Manual Lock Stainless Manual Lock No

3100F(x) 4.5 Shock Absorbing Elastic No Single Aluminium Manual Locking Polyester Loop No

3110F(x) 4.5 Shock Absorbing Elastic No Single Aluminium Manual Locking Aluminium Manual Locking No

3102F(x) 2.3 Shock Absorbing Elastic Yes Single Aluminium Manual Locking Polyester Loop No

3108F(x) 6.8 Shock Absorbing Elastic No Single Aluminium Auto Locking Polyester Loop No

3109F(x) 12 Shock Absorbing Elastic No Single Aluminium Auto Locking Polyester Loop Yes

3118F(x) 6.8 Shock Absorbing Elastic No Single Aluminium Auto Locking Aluminium Auto Locking No

3119F(x) 12 Shock Absorbing Elastic No Single Aluminium Auto Locking Aluminium Auto Locking Yes

3129 18 Heavy Duty No Single Aluminium Auto Locking Aluminium Auto Locking Yes

3139 18 Heavy Duty No Single Aluminium Auto Locking Aluminium Auto Locking Yes

3130S 0.9 Coiled Cable No Single Stainless Manual Lock Stainless Manual Lock No

3130M 2.3 Coiled Cable No Single Stainless Manual Lock Stainless Manual Lock No

3311 6.8 Shock Absorbing Elastic No Twin Stainless Manual Lock Stainless Manual Lock No

3114 1.4 Wrist Yes Single Nylon Strap Wrist Cuff Stainless Manual Lock Yes

3115 0.9 Wrist No Single Nylon Strap Wrist Cuff Loop Choke Yes

3116 1.4 Wrist Yes Single Elastic Loop Elastic Wrist Cuff Yes

3150 0.9 Speciality No Single Polyester Loop Polypropylene Buckle No

3155 0.9 Speciality No Single Polyester Loop Polypropylene Clamp No

3156 0.9 Specialty No Single Aluminium Auto Locking PU Loop No

3157 0.9 Specialty Yes Single Plastic Modular Buckle Polypropylene Clamp No

3158 0.9 Speciality No Single Plastic Loop Polypropylene Clamp No

3166 0.9 Specialty No Single Aluminium Auto Locking Aluminium Auto Locking No

38 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


SQUIDS TOOL SHACKLES SELECTION GUIDE

Follow the tool shackles selection guide to choose the right shackles for the job. Waisted tools or captive tools with connection points

that are too small for carabiners, can use tool shackles to create a connection point.

TOOL

WEIGHT

TAIL MODEL

#

SHAFT DIAMETER:

< 19 MM

SHAFT DIAMETER:

19-32 MM

TRAP MODEL (TYPE: MODEL)

SHAFT DIAMETER:

32-44 MM

SHAFT DIAMETER:

44-57 MM

SHAFT DIAMETER:

57-63 MM

WEIGHT < 0.90KG

WEIGHT < 2.26KG

WEIGHT < 4.53KG

WEIGHT < 6.80KG

WEB TAIL: 3700

(ALL SIZES)

ELASTIC TAIL:

3703, 3703EXT, 3713

ELASTIC TAIL:

3703, 3703EXT, 3713

ELASTIC TAIL:

3703, 3703EXT, 3713

ELASTIC TAIL:

3703EXT

Tape: 3750

[Length = > 31cm]

Tape: 3750

[Length = > 31cm]

Tape: 3750

[Length = > 46cm]

Tape: 3750

[Length = > 46cm]

Tape: 3750

[Length = > 61cm]

Cold Shrink: N/A Cold Shrink: N/A Cold Shrink: N/A Cold Shrink: N/A Cold Shrink: N/A

Tape: 3750

[Length = > 31cm]

Tape: 3750

[Length = > 31cm]

Tape: 3750

[Length = > 46cm]

Tape: 3750

[Length = > 46cm]

Tape: 3750

[Length = > 61cm]

Cold Shrink: N/A Cold Shrink: 3723 Cold Shrink: 3723 Cold Shrink: 3726 Cold Shrink: 3726

Tape: 3750

[Length = > 46cm]

Tape: 3750

[Length = > 46cm]

Tape: 3750

[Length = > 61cm]

Tape: 3750

[Length = > 61cm]

Tape: 3750

[Length = > 76cm]

Cold Shrink: N/A Cold Shrink: N/A Cold Shrink: 3724 Cold Shrink: 3726 Cold Shrink: 3726

Tape: 3750

[Length = > 61cm]

Tape: 3750

[Length = > 61cm]

Tape: 3750

[Length = > 76cm]

Tape: 3750

[Length = > 76cm]

Tape: 3750

[Length = > 92cm]

Cold Shrink: N/A Cold Shrink: N/A Cold Shrink: 3724 Cold Shrink: 3726 Cold Shrink: 3726

Tape: 3750

[Length = > 76cm]

Tape: 3750

[Length = > 76cm]

Tape: 3750

[Length = > 92cm]

Tape: 3750

[Length = > 92cm]

Tape: 3750

[Length = > 122cm]

Cold Shrink: N/A Cold Shrink: N/A Cold Shrink: N/A Cold Shrink: N/A Cold Shrink: 3726

PRYME.COM.AU

39


PROFLEX

ANTI-VIBRATION GLOVES

PROTECTION

ARMOUR

CERTIFIED

VIBRATION

REDUCTION

AVC (ADVANCED VIBRATION

CONTROL) PADDED PALM

HAND-ARM

VIBRATION (HAVS)

AKA “WHITE FINGER”

IS A PERMANENT

MEDICAL CONDITION

THAT CAUSES LOSS OF

FEELING IN FINGERS,

HANDS AND ARMS.

EXTREME CASES

CAN RESULT IN

LOSS OF PARTS OR

COMPLETE DIGITS.

9015F(x)

PRYME TIP:

Always use a Vibration Reducing

Glove when working with power

tools and machinery

MOULDED

HOOK & LOOP

CLOSURE CINCHES TIGHT

40 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


ANSI/ISO-CERTIFIED LIGHTWEIGHT

ANTI-VIBRATION

ANSI/ISO-CERTIFIED

ANTI-VIBRATION + DIR PROTECTION

KEY FEATURES: 9000

• ANSI S2.73-2014/ISO 10819:2013

certified protection

• Unique chloroprene rubber palm pad

• Breathable 7-gauge cotton/nylon seamless knit

• Comfortable, flexible pre-curved design

• Elastic cuff for secure fit

Part No. Description UOM

16453 Black | M 6 Pairs

16454 Black | L 6 Pairs

16455 Black | XL 6 Pairs

KEY FEATURES:

• ANSI S2.73-2014/ISO 10819:2013

certified protection

• Full-length AVC padding under gripping palm

• TPR armour on knuckles and fingers

•Hex-stretch knit + breathable

spandex construction

• Low-profile moulded hook & loop closure with ID

Part No. Description UOM

16232 Black | S 6 Pairs

16233 Black | M 6 Pairs

16234 Black | L 6 Pairs

16235 Black | XL 6 Pairs

16236 Black | 2XL 6 Pairs

9015F(X)

Size Chart for Proflex Gloves

Size

XS (6)

S (7)

M (8)

L (9)

XL (10)

2XL (11)

3XL (12)

Fits Hands

up to 7in (18cm)

up to 7-8in (18-20cm)

up to 8-9in (20-23cm)

up to 9-10in (23-25cm)

up to 10-11in (25-28cm)

up to 11-12in (28-30cm)

up to 12-13in (30-32cm)

PRYME.COM.AU

41


SKULLERZ

BUMP CAPS

Bump Caps do not provide protection against effects of falling / thrown objects or

moving suspended loads and should not be used instead of an industrial safety

helmet as specified in EN397 or ANSI Z89.

Innovative ventilation system and

sculpted rear opening allow the shell

to protect and breathe

Durable, impact-resistant ABS plastic

construction outside; comfortable

thermo-formed foam padding inside

EN 812: 2012

CERTIFIED PROTECTION

EN 812 is currently the world’s only

standard for bump cap design and

performance. Certification requires the

cap and shell system undergo rigorous

testing to prove protection from impact

and penetration under various conditions.

Skullerz 8950, 8960, and 8945 Bump

Caps provide certified protection you can

count on for those tight spots on the job.

Certified forehead and crown coverage

means maximum protection from bumps

and bangs

Unique flanged shell flexes for fit and

comfort while ribs provide stability

and support

CHOOSE THE RIGHT STYLE OF BRIM FOR YOUR WORK

Micro Brim

-30mm

Short Brim

-50mm

Long Brim

-80mm

42 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


USER INFORMATION

• BUMP CAPS ARE MADE TO ABSORB

ENERGY OF A BLOW BY PARTIAL

DESTRUCTION OR DAMAGE TO SHELL

• THOUGH SUCH DAMAGE MAY NOT

BE READILY APPARENT, ANY BUMP

CAP SUBJECTED TO SEVERE IMPACT

SHOULD BE REPLACED

• FOR ADEQUATE PROTECTION, CAP

MUST FIT OR BE ADJUSTED TO SIZE

OF USER’S HEAD

• DO NOT APPLY PAINT, SOLVENTS,

ADHESIVES OR SELF-ADHESIVE

LABELS UNLESS INSTRUCTED BY THE

MANUFACTURER

PRYME.COM.AU

43


SKULLERZ

BUMP CAPS

THREE DIFFERENT

BRIM LENGTHS

43% LIGHTER

THAN THE 8950 MODEL

WITH OR

WITHOUT LEDS

EN 812-COMPLIANT

PROTECTION

SHELL

PROTECTS,

FLEXES AND

BREATHES

8965

REMOVABLE ANTI-

MICROBIAL LINER

INNOVATIVE CLOSURE

KEEPS CAP IN PLACE

44 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


NEXT GEN BUMP CAP

NEXT GEN LED BUMP CAP

KEY FEATURES: 8955

• Protective shell designed for maximum

comfort and airflow

• Nylon or Hi-vis polyester outer with

reflective accents

• Removable and machine washable antimicrobial

liner

• EN 812 Compliant patented design

• Brim sizes: Short (50mm) and Long (80mm)

Part No. Description UOM

Short Brim

23366 Black 6 Units

23336 Navy 6 Units

23351 HV Lime 6 Units

Long Brim

23367 Black 6 Units

23337 Navy 6 Units

23352 HV Lime 6 Units

KEY FEATURES: 8965

• Protective shell designed for maximum comfort

and airflow

• Patented LED lighting technology built-in under brim

• Nylon outer with reflective accents

• Removable and machine washable antimicrobial

liner

• EN 812 Compliant patented design

• Brim sizes: Short (50mm) and Long (80mm)

Part No. Description UOM

Short Brim

23368 Black 6 Units

23338 Navy 6 Units

Long Brim

23369 Black 6 Units

23339 Navy 6 Units

PRYME.COM.AU

45


SKULLERZ

BUMP CAPS

PROTECTIVE SHELL

FLEXES AND BREATHES

43% LIGHTER

THAN THE 8950 MODEL

FEATURES 40%

MORE VENTING

CUSTOM FIT

HEIGHT ADJUSTMENT

8945

YOU CAN

LEAVE YOUR

HAT ON!

UNIVERSAL BUMP CAP INSERT

TURNS ANY HAT INTO A PROTECTIVE CAP.

+

=

8965

46 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


UNIVERSAL BUMP CAP INSERT

BUMP CAP / XL BUMP CAP

XL Shell Now

Available!

KEY FEATURES: 8945

• Add flexible, impact-resistant insert to any cap

• Cut-away system adjusts height for custom fit

• Lightweight, breathable vented design

• Internal foam padding provides added protection

• Updated design with 40% more venting

Part No. Description UOM

23380 Insert | Grey 6 Units

BUMP CAP WITH LED LIGHTING

TECHNOLOGY

KEY FEATURES: 8960

KEY FEATURES: 8950

• Removable, impact-resistant shell with foam lining

• Patented flanged design for comfort and airflow

• Nylon or hi-vis polyester with reflective accents

• Updated design with 40% more venting

• EN 812 Compliant patented design

• Brim sizes: Micro (30mm), Short (50mm) and Long

(80mm)

Part No. Description UOM

Micro Brim

23342 Black 6 Units

23341 Navy 6 Units

23331 HV Lime 6 Units

Short Brim

23340 / 23346 Black / Black | XL 6 Units

23343 / 23347 Navy / Navy | XL 6 Units

23333 HV Lime 6 Units

Long Brim

23344 / 23348 Black / Black | XL 6 Units

23345 / 23349 Navy / Navy | XL 6 Units

23335 HV Lime 6 Units

• Removable, impact-resistant shell with foam lining

• Patented flanged design for comfort and airflow

• Nylon or hi-vis polyester with reflective accents

• Updated design with 40% more venting

• EN 812 Compliant patented design

• Brim sizes: Micro (30mm), Short (50mm) and Long

(80mm)

Part No. Description UOM

Short Brim

23370 Black 6 Units

23373 Navy 6 Units

23377 HV Lime 6 Units

Long Brim

23374 Black 6 Units

23375 Navy 6 Units

23379 HV Lime 6 Units

PRYME.COM.AU

47


ERGONOMICS

SPRAINS AND STRAINS

43 % 38 % 10 %

ARE WORK

RELATED INJURIES

ARE BACK

RELATED INJURIES

ARE KNEE

RELATED INJURIES

40.8 % ARE BODY STRESSING INJURIES AND

20.9 % ARE DUE TO SLIPS, TRIPS AND FALLS WITHIN AUSTRALIA

4 OUT OF 5 PEOPLE EXPERIENCE BACK PAIN IN THEIR LIFETIME

Work-Related sprains and strains or

Musculoskeletal disorders (WMSDs)

are the most common condition for

which workers' compensation claims

are currently lodged. Complex joints

like the knees and back are an injury

hotspot for workers.

PREVENTING SPRAINS

AND STRAINS

• Ergonomic solutions like using the

right positioning, raising work off

the floor and taking small breaks to

relieve stress all assist in preventing

sprains and strains.

• Used correctly ergonomic PPE such

as back supports, knee pads and

kneeling pads can provide support,

cushioning and serve as a reminder

to use correct bending, lifting or

kneeling techniques.

SPEAK TO OUR

SPECIALIST TODAY

SALES@PRYME.COM.AU

48 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


snugly around your hips with the

HOW IT front FIT?

of the support two-fingers

width below SHOULD

your naval.

// ProFlex The straps

IT FIT?

® Back should Supports be placed should fit

securely snugly around on your your shoulders hips with the

without front of the causing support tension. two-fingers

width below your naval.

// // ProFlex The hook

HOW SHOULD

® Back & loop Supports fasteners should should fit

// snugly be The closed straps around completely. should your be hips placed with the

front securely of the on support your shoulders two-fingers

width without below causing your tension. naval.

IT HOW FIT? SHOULD

// // The straps hook & should loop fasteners be placed should

securely be closed on completely. your shoulders

// ProFlex without

IT FIT?

® Back Supports should fit

EIGHT

EIGHT

causing tension.

snugly around your hips with the

Grasp each end

//

front

The hook

of the

&

support

loop fasteners

two-fingers

should

FITTING A PROFLEX BACK SUPPORT

2

waistband. Stret

// width

be closed

ProFlex below

completely.

® Back your Supports naval. should fit DID YOU KNOW?

DID DID YOU YOU KNOW?

• ProFlex® Back Supports should fit

across the the left and ata

// The snugly straps around should your be placed hips with the

securely front 1 EIGHT

Slip

of

the

the

back snugly

support

support around

two-fingers

on. your hips with the front

SPRAINS // STRAINS // ARE

edge ARE

of of the the waist ban

on your of the shoulders support two-fingers width below

SPRAINS // // STRAINS ARE

below the the navel. Fast

without width below causing your tension. naval.

at bands loosely at your

COMMANDMENTS COMMANDMENTS

THE THE #1 #1 INJURY RESULTING

your naval.

THE #1 INJURY RESULTING

// // The hook straps & should loop fasteners be placed should

COMMANDMENTS

be securely closed completely.

on your shoulders

without 1 OF LIFTING

OF OF LIFTING

• The straps should be placed securely on

IN IN DAYS AWAY FROM WORK

IN DAYS AWAY FROM WORK

Plan your lift

Slip the

causing

back your shoulders support

tension.

on. without causing tension.

OF LIFTING Plan Plan your

Plan

your lift

your

lift

Ask

Ask

for

for

1

// The hook & loop fasteners should

1Ask and for test the load. Ge

• The hook & loop fasteners should be

1 and and test lift test the and load. the test load. 2 2

help. help. help. 3 3foo

be closed completely. closed completely.

the load.

Slip the back support on.

1

Grasp each end of the

2 waistband. Stretch the right

1Slip end

the back

across the left and attach. The upper support on.

Adjust straps for

edge of the waist band should be

Slip the back support on.

1

3

fit fit without tensio

below

Grasp

the navel.

each end

Fasten

of the

outer elastic

bands loosely at your side.

2 waistband. Stretch the right end

across Slip the the left back and support attach. on. The 2upper

Plan Plan your your lift

lift

Ask Ask for

for

Get Get a firm

a firm

Bend Bend your

your

Grasp each end

your

1edge of the

Plan waist

your band

lift lift

should be

Ask for for

Get a a firm

Tighten Tighten Bend your

your

Lift Tighten with Lift with your Kee

Grasp each end of the of the waistband.

stomach muscles.

below the navel. Fasten outer

2 1

1

1and and test test the the load.

load.

and test the the load.

5

6 your legs. 7

waistband. Stretch the right

Stretch elastic

end

the 2

2

right help.

end 3

2help.

help.

footing.

4

3footing.

footing.

knees.

5

4knees.

knees.

53

4

stomach muscles. 6 your stomach legs. muscles. 7 loa

muscles.

bands loosely at your side. across the left and

across the left and attach. The

attach.

upper

The upper

edge of the waist band should edge be of the waistband

below the navel. Fasten outer should elastic be below the

bands loosely at your side. navel. Fasten outer

Grasp each end of the elastic bands loosely

at your side.

2 waistband. Adjust straps Stretch for a the comfortable right end

Before you lift lift -

across 3 fit the without left and tension. attach. The upper

4

elastic bands ana

edge Grasp of the each waist end band of should the be

forward as as far far as as pos

below 2 waistband. the navel. Stretch Fasten outer the right elastic 3end

bands across loosely the left at and your attach. side. The upper

Adjust straps for a

Adjust straps for a comfortable comfortable

edge

3 fit

of

without

the waist

tension.

band should

fit

be Tighten Tighten your

your

Lift without tension.

Lift Lift with

with with

Keep Keep Keep the the

the

Keep

Keep Keep your

your

your

below the navel. Tighten Fasten your

outer elastic

Lift Lift with

Keep the the

Keep your

bands 5loosely 5

5stomach stomach muscles. muscles.

stomach at your muscles. side.

6

6

your legs.

7

your legs.

6your legs. 7

load close.

8

7load load close. close.

8

8back back upright. upright.

back upright.

Adjust straps for a comfortable

3 fit without tension.

4Before you lift -

grasp the outer

Before you lift - grasp the elastic outerbands and

4

?

elastic bands and stretch stretch forward as far

forward as far as possible. as possible.

Secure bands ini

Adjust straps for a comfortable

3

DID YOU KNOW? 5

position.

fit without tension.

Before you lift - grasp the outer

4 elastic bands and stretch

Adjust straps for a comfortable

5

forward as far as possible. Secure bands in

SPRAINS // STRAINS ARE THE #1 INJURY

3 fit without tension. comfortable position.

Before you lift - grasp the outer

RESULTING IN DAYS AWAY FROM WORK

4 elastic bands and stretch

forward as far as possible.

5

PROPER PROPER LIFTING

LIFTING

EIGH

Slip the back sup

1

DID YOU

REDUCE THE THE RISK OF OF BACK INJURIES >>>

>>> SPRAINS

PROPER LIFTING

COMMANDMENTS

THE THE #1#

I

IN IN DAYS

REDUCE THE RISK OF BACK INJURIES >>>

Secure bands in comfortable

position.

Before you lift - grasp the outer

EIGHT

Slip the back su

DID Y

COMMANDME

OF OF LIFTING

PRYME.COM.AU

OF LIFTIN

49

2

6


PROFLEX

ERGONOMICS

BACK SUPPORTS

NON-CONDUCTIVE

POLYPROPYLENE STAYS

ADJUSTABLE,

DETACHABLE

SUSPENDERS

100

280D SPANDEX

BODY MATERIAL

BLACK AND

HV ORANGE

50 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


ECONOMY SPANDEX

BACK SUPPORT

STANDARD WEIGHT LIFTERS

STYLE BACK SUPPORT

KEY FEATURES: 1500

• 7.75” (19.7cm) rigid foam body

• Durable 900D foam laminated nylon body fabric

• Foam lumbar pad

KEY FEATURES:

100/

100HV

• 8” (20.3cm) economical spandex body

• Non-conductive polypropylene stays

• 280D spandex body material

• Adjustable, detachable suspenders

• Rubber track webbing

• Stretchable bias binding with zig-zag stitching

Part No. Description UOM

100 | Black

11381 / 11382 XS / S 6 Units

11383 M 6 Units

11384 / 11385 L / XL 6 Units

11386 / 11387 /

11388

100HV | HV Orange

2XL / 3XL / 4XL

6 Units

11881 / 11882 XS / S 6 Units

11883 M 6 Units

11884 / 11885 L / XL 6 Units

11886 / 11887 /

11888

2XL / 3XL / 4XL

6 Units

Part No. Description UOM

11471 S 6 Units

11472 M 6 Units

11473 / 11474 L / XL 6 Units

11475 2XL 6 Units

PROPER FIT

Use flexible measuring tape

and find the circumference

at your belly button.

Size

XS

S

M

L

XL

2XL

3XL

4XL

Fits Waist

Up to 25” (64cm)

25-30” (64-76cm)

30-34” (76-86cm)

34-38” (86-97cm)

38-42” (97-107cm)

42-46” (107-117cm)

46-52” (117-132cm)

52-58” (132-147cm)

PRYME.COM.AU

51


PROFLEX

ERGONOMICS

KNEE PADS

BUCKLE OR HOOK +

LOOP STRAP OPTIONS

CAP STYLES

FOR DIFFERENT

KNEELING ACTIVITIES

335HL

DURABLE NBR FOAM PADDING

MAXIMISES COMFORT + DURABILITY

52 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


SLIP-RESISTANT RUBBER CAP

SHORT LIGHT DUTY COPOLYMER

KEY FEATURES:

• Slip-resistant long rubber cap to grip surfaces

• 840D nylon fabric cover

• 12mm NBR foam padding cut to hug the knee

• Nickel-plated grommets

• Buckle or hook & loop closure

Part No. Description UOM

18336 Black Cap 6 Pairs

335HL

KEY FEATURES: 200

• Durable copolymer padding

• Super lightweight for comfortable all-day wear

• Single strap with hook & loop closure

Part No. Description UOM

18200 Black 6 Pairs

WIDE SOFT CAP LEATHER

KEY FEATURES:

• Leather cap for protection

• Provides protection against sparks/slag/fire

(Not FR rated)

• 12mm NBR foam padding cut to hug the knee

• Slightly wider and longer for wraparound comfort

• Adjustable straps and buckle closure

Part No. Description UOM

18232 Black and Leather Brown 6 Pairs

230LTR

PRYME.COM.AU

53


PROFLEX

ERGONOMICS

KNEE PADS

LIGHTWEIGHT GEL +

EVA FOAM

FOR MOBILE COMFORT

ROUND CAP

FOR HIGHEST DEGREE

OF KNEELING MOBILITY

367

NON-SLIP RUBBER CAP

GRIPS KNEELING SURFACE

54 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


ROUND CAP LIGHTWEIGHT GEL

SHORT CAP INJECTED GEL

KEY FEATURES: 367

• Round cap for highest degree of kneeling mobility

• Non-slip rubber cap grips kneeling surface

• Lightweight gel + EVA foam for mobile comfort

• Breathable perforated neoprene bottom strap

• Top elastic strap cinches tight with plastic clip

Part No. Description UOM

18467 Black 6 Pairs

KEY FEATURES: 355

• Short cap design for mobility when kneeling

• Non-slip rubber cap grips kneeling surface

• Injected gel + PU foam for all-day comfort

• Bottom webbing and top elastic straps

• Plastic clips cinch tight and keep straps secure

Part No. Description UOM

18455 Black 6 Pairs

GEL FOAM

KEY FEATURES: 350

• 12mm NBR gel padding & 20mm EVA padding

• 1680D ballistic nylon outer shell

• Slip-resistant durable 420D nylon-rubber surface

• Adjustable, breathable neoprene stretch strap

• Hook & loop closure

Part No. Description UOM

18350 Black 6 Pairs

PRYME.COM.AU

55


CHILL-ITS ®

COOLING RANGE

THE ANATOMY OF CHILL FACTOR X.

// AIRFLOW

// EVAPORATION

// PERMEABLE MEMBRANE

DRY EVAPORATIVE

TECHNOLOGY:

100% DRY,

COOL COMFORT.

// WATERWICK

// WATER

ACTIVATION:

Fill vest or cap with water

COOLING DURATION:

Up to 3 days

// COOLS BODY

// COOLS BODY

EXPECTATIONS:

Inner membrane evaporates from the inside out

so the user stays dry, cool, and comfortable.

Machine washable with cap closed.

// WATER

// COOLS BODY

// AIRFLOW

// EVAPORATION

// MICROFIBER

// COOLS BODY

ACTIVATION:

Run underwater

COOLING DURATION:

Up to 3 hours

MICROFIBER

COOLING TOWEL

(MF):

A SOFT TOUCH THAT’S

HARD TO BEAT.

EXPECTATIONS:

Fibres hold water while maintaining

lightweight and soft feel. Reusable,

machine washable.

56 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


4 DIFFERENT TECHNOLOGIES. ONE PURPOSE: KOOLIN' THE GANG.

// WATER

// AIRFLOW

// EVAPORATION

// PVA

ACTIVATION:

Run underwater

COOLING DURATION:

Up to 4 hours

PVA COOLING TOWEL

(CT):

SUPER ABSORBENT.

HYPER EVAPORATIVE.

WICKED COOL.

// COOLS BODY

// COOLS BODY

EXPECTATIONS:

Sponge-like feel. Excellent water retention

(the key to cool) without getting bulky.

Reusable, machine washable.

// WATER

// AIRFLOW

// COOLS BODY

// EVAPORATION

// ACRYLIC POLYMERS

// COOLS BODY

ACTIVATION:

Soak in cold water 2-5 minutes

COOLING DURATION:

Up to 4 hours

ACRYLIC POLYMER

CRYSTALS:

THEY PLUMP WHEN

YOU CHILL ’EM!

EXPECTATIONS:

Polymers plump and expand.

Squishy to the touch.

Reusable, hand wash only.

PRYME.COM.AU

57


EVAPORATIVE SERIES

CHILL-ITS ®

COOLING RANGE

MICROFIBER, PVA AND

ACRYLIC POLYMER

TECHNOLOGIES

AVAILABLE

PACKAGING

MULTIPLE OPTIONS AVAILABLE

ADVANCED

EVAPORATIVE COOLING

TECHNOLOGY

6602

UV PROTECTION

UP TO UPF 50+

FOR INFORMATION ON HOW TO ACTIVATE ANY CHILL-ITS ®

COOLING TOWELS, Visit: www.pryme.com.au

58 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


STANDARD COOLING TOWEL

STANDARD COOLING TOWEL BAND

X 50 Pack

6602

KEY FEATURES: 6603

KEY FEATURES: 6602

• Advanced PVA cooling technology, 2mm thick

• Super-evaporative feels cooler than ambient air

• Activates fast and easy - run underwater

• Size: 13” x 29.5” (33cm x 75cm)

• Rinse before use, machine washable

• BULK: 50 Indiv. packaged in heat sealed bag w/UPC

Part No. Description UOM

6602 BULK

12439 Hi-vis Lime 6 Units

12442 Pink 6 Units

12438 Grey 6 Units

12420 Blue 6 Units

• Advanced PVA cooling technology, 2mm thick

• Super-evaporative feels cooler than ambient air

• Activates fast and easy - run underwater

• Wear as neck wrap by pulling end through slit

• Size: 4” x 29.5” (10cm x 75cm)

• Rinse before use

Part No. Description UOM

12418 Blue 6 Units

COOLING TOWEL COLOURS:

Blue

Hi-vis Lime

Pink

Grey

*Note: all colours not necessarily available in all styles.

See specific product for listing.

HOW THICK IS MY PVA TOWEL?

2MM 6602 // 6602 BULK // 6603

1.6MM 6601

PRYME.COM.AU

59


CHILL-ITS ®

COOLING RANGE

EVAPORATIVE SERIES

CHILL-ITS ® COLOURS

& PATTERNS

Blue Hi-vis Lime

*Note: all colours not necessarily

available in all styles.

See specific product for listing.

COOLING WRAP TIE

KEY FEATURES: 6700

• Tie closure headband

• Lightweight, cooling acrylic polymers

• Soak in cold water 2-5 minutes to activate

• Remains cool for up to 4 hours

Part No. Description UOM

12307 Blue 24 Units

12301 Hi-vis Lime 24 Units

60 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


COOLING WRAP TIE WITH TOWEL

COOLING BANDANA FLAME RESISTANT

KEY FEATURES:

• Tie closure headband

• Advanced PVA material activates easily and quickly

• Reusable, just rewet to reactivate

• Super-evaporative cooling process keeps you cool

• Rinse before use

Part No. Description UOM

6700CT

12567 Blue 24 Units

12566 Hi-vis Lime 24 Units

12562 Camouflage 24 Units

12563 Red Western 24 Units

12564 Navy Western 24 Units

KEY FEATURES:

• Tie Closure Triangle hat

• Modacrylic cotton blend FR fabric

• Fabric meets ASTM F1506 performance

requirements

• Lightweight, cooling acrylic polymers

• Soak in cold water 2-5 minutes to activate

NFPA 70E CAT 1

ATPV 7.1 CAL/CM 2

Part No. Description UOM

12627 Blue 6 Units

12621 Hi-vis Lime 6 Units

6710FR

COOLING BANDANA

COOLING WRAP TIE FLAME RESISTANT

KEY FEATURES: 6710

• Tie Closure Triangle hat

• Soak in cold water 2-5 minutes to activate

• Remains cool for up to 4 hours

Part No. Description UOM

12327 Blue 24 Units

12331 Hi-vis Lime 24 Units

12324 Camouflage 24 Units

12325 Red Western 24 Units

12326 Navy Western 24 Units

KEY FEATURES:

• Tie closure headband

• Modacrylic cotton blend FR fabric

•Fabric meets ASTM F1506 performance

requirements

• Lightweight, cooling acrylic polymers

• Soak in cold water 2-5 minutes to activate

NFPA 70E CAT 1

ATPV 7.1 CAL/CM 2

Part No. Description UOM

12418 Black 6 Units

6700FR

PRYME.COM.AU

61


EVAPORATIVE SERIES

CHILL-ITS ®

COOLING RANGE

EASY ACTIVATION

MULTIPLE PACKAGING

OPTIONS AVAILABLE

6685

LIGHTWEIGHT

CONSTRUCTION

VENTED

SIDE PANELS WITH STRETCHABLE

MESH CONSTRUCTION

LONG-LASTING

COOLING TECHNOLOGY

62 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


DRY EVAPORATIVE

TECHNOLOGY EXPLAINED...

// EVAPORATION

// AIRFLOW

// PERMEABLE MEMBRANE

// WATERWICK

// WATER

// COOLS BODY

// COOLS BODY

DRY EVAPORATIVE COOLING VEST

KEY FEATURES: 6685

• Provides immediate and long-lasting cooling

• Up to three days of dry cooling

• Activate with 13-20oz (400-600ml) of water

• Lightweight, durable and machine washable

• Easy to use, watertight filling cap

Part No. Description UOM

12673 HV Lime | M 1 Unit

12674 HV Lime | L 1 Unit

12675 HV Lime | XL 1 Unit

12676 HV Lime | 2XL 1 Unit

12677 HV Lime | 3XL 1 Unit

12678 HV Lime | 4XL 1 Unit

HOW DOES THE DRY EVAPORATIVE COOLING

TECHNOLOGY WORK?

1. Activate vest or cap - fill vest or cap with water and distribute

water evenly

2. Inner dry tech membrane does its thing - technology gradually

releases water through evaporation from the inside out keeping you

cool, comfortable, and most importantly, dry

HOW COOL WILL IT GET?

Will cool up to 15˚F (10˚C) below ambient air temp

*Note: high levels of humidity (60-80%) can affect cooling ability

HOW MUCH WATER IS NEEDED?

Vest: 16 – 20 oz depending on size (400-600ml)

Cap: 3 oz (89ml)

*Note: more water ≠ better cooling, DON’T OVERFILL

HOW LONG DOES THE COOLING EFFECT LAST?

Up to 3 days depending on environment

HOW TIGHT SHOULD THE VEST FIT?

As close to the skin as possible – the closer it is, the more cooling you

feel. Recommend wearing over a lightweight t-shirt

CAN THE VEST BE WORN UNDERNEATH OTHER

GARMENTS?

The vest needs airflow to breathe so a mesh vest is fine, but heavier

layers are not recommended

DO I NEED TO CLEAN THE INSIDE OF THE VEST?

NO! Leave it be. It has an anti-microbial treatment that will keep itself

clean and free from any bacteria or fungal growth

CAN I WASH THE PRODUCT?

You sure can, but keep that cap CLOSED

PRYME.COM.AU

63


EVAPORATIVE SERIES

CHILL-ITS ®

COOLING RANGE

6660

UNIVERSAL DESIGN

ELASTIC INNER RIM TO FIT MOST HARD HATS

100% POLYESTER

FABRIC

UV PROTECTION

LONGER LENGTH TO BLOCK UV RAYS

64 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


HARD HAT BRIM WITH NECK SHADE

TERRY HARD HAT LINER SWEATBAND

KEY FEATURES: 6660

• 100% polyester fabric

• Universal design - elastic inner rim to

fit most hard hats

• Hook & loop straps for hard hat connection

• Longer length to block UV rays

Part No. Description UOM

12640 Hi-vis Lime 50 Units

12641 Hi-vis Orange 50 Units

12642 White with Green Flap 50 Units

12643 Navy Blue 50 Units

KEY FEATURES: 6609

• Absorbent Terry headband

• Fits most hard hat suspension systems

• 100% cotton

• Machine washable

Part No. Description UOM

12440 Grey 24 Units

PRYME.COM.AU

65


CHILL-ITS ®

COOLING RANGE

EVAPORATIVE SERIES

HARD HAT PAD WITH POLYMERS

HARD HAT LINER WITH POLYMERS

KEY FEATURES: 6715

• Lightweight, cooling acrylic polymers

• Soak in cold water 2-5 minutes to activate

• Hook & loop closures

• Conveniently attaches to hard hat suspension

• Remains cool for up to 4 hours

Part No. Description UOM

12337 Blue 24 Units

PRYME TIP:

Must have air movement to cool, cannot be worn under PPE Clothing

KEY FEATURES: 6716

• Lightweight, cooling acrylic polymers

• Soak in cold water 2-5 minutes to activate

• Hook & loop closures

• Conveniently attaches to hard hat suspension

• Remains cool for up to 4 hours

Part No. Description UOM

12338 Blue 24 Units

EVAPORATIVE COOLING VEST

KEY FEATURES: 6665

• Super-absorbent material inside

• Water-repellent liner

• Lightweight, durable and washable

• Soak in cold water 2-5 minutes to activate

• Remains cool for up to 4 hours

Part No. Description UOM

12533 Hi-vis Lime | M 6 Units

12534 Hi-vis Lime | L 6 Units

12535 Hi-vis Lime | XL 6 Units

12536 Hi-vis Lime | 2XL 6 Units

12537 Hi-vis Lime | 3XL 6 Units

66 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


PRYME.COM.AU

67


CHILL-ITS ®

COOLING RANGE

MULTI-BRAND

BLOCKS WIND,

SUN AND DUST

6485

ANTI-ODOR

TREATMENT

MOISTURE

WICKING

COMFORTABLE

STRETCHABLE AND SEAM-FREE

MULTIPLE STYLE

AND USAGE

CONFIGURATIONS

68 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


MULTI-BAND

MULTI-BAND FLAME RESISTANT

NFPA 70E CAT 1

ATPV 4.2 CAL/CM 2

KEY FEATURES: 6485

• Multiple styles and usage configurations

• Moisture management performance fabric dries fast

• Stretchable, comfortable and seam-free

• Anti-stink treatment helps workers remain unscented

• Blocks wind, sun and dust

Part No. Description UOM

42108 Hi-vis Lime 12 Units

42109 Hi-vis Orange 12 Units

KEY FEATURES:

• Inherently FR Nomex® knit fabric

• Meets requirements of ASTM F1506s

• Classified CAT 1 according to NFPA 70E

• Stretchable, comfortable and seam-free

• Anti-stink treatment helps workers remain unscented

• Multi-climate usage

Part No. Description UOM

42201 Navy 6 Units

EXAMPLES OF HOW TO WEAR THE CHILL-ITS® MULTI-BAND

HEADBAND MASK NECKERCHIEF SCARF BALACLAVA HAIRBAND WRISTBAND

DEW RAG

SKULL CAP

PRYME.COM.AU

69


PHASE CHANGE SERIES

CHILL-ITS ®

COOLING RANGE

NO AIRFLOW

REQUIRED

PHASE CHANGE COOLING

LIGHTWEIGHT

30-60% LIGHTER THAN

OTHER PCM VESTS

6250

2 HOURS

OF COOLING

PRYME TIP:

Can be worn under

coveralls or HAZ -MAT

protective work gear

ADJUSTABLE

FINE-TUNE YOUR FIT

HOLDS 4

LIGHTWEIGHT

PACKS

70 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


HI-VIS PREMIUM PHASE CHANGE VEST

KEY FEATURES:

• Maintains constant 64ºF / 18ºC

• Cooling lifecycle lasts up to four hours

• Modacrylic cotton blend FR fabric

• Reflective striping for added visibility

• Fabric meets ASTM F1506 per NFPA 70E (CAT 1)

Part No. Description UOM

Vest + Charge Packs

NFPA 70E CAT 1

ATPV 7.1 CAL/CM 2

12220 HV Orange | S/M 1 Unit

12221 HV Orange | S/M 1 Unit

6215HV

LIGHTWEIGHT PHASE CHANGE VEST

KEY FEATURES: 6250

• Maintains constant 59ºF / 15ºC

• 100% bio-based PCM

• Cooling lifecycle lasts up to 2 hours

• Adjustable soft canvas vest holds 4 lightweight packs

• 30-60% lighter weight than other PCM vests

Part No. Description UOM

Vest + Charge Packs

12133 Black | S/M 1 Unit

12135 Black | L/XL 1 Unit

PRYME.COM.AU

71


HYDRATION SERIES

CHILL-ITS ®

COOLING RANGE

600D

RIPSTOP POLYESTER SHELL

WITHSTANDS HARSH USE

LARGE ZIP-UP

CAP COVER

5156

BREAKAWAY

SHOULDER STRAPS PREVENT

DANGEROUS HANG-UPS

EASY-FILL ANTI-MICROBIAL

DUAL CAP BLADDER

ANTI-MICROBIAL BITE

VALVE WITH COVER TO

KEEP CONTAMINANTS OUT

2L & 3L TPE

BLADDER OPTIONS

OPTIONAL PUMP FOR QUICK,

PRESSURISED STREAM OF WATER

72 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


3L PREMIUM CARGO HYDRATION PACK

3L PREMIUM LOW-PROFILE HYDRATION PACK

KEY FEATURES: 5157

• Durable 600D water-resistant ripstop polyester

• Vented straps and back for maximum breathability

• 8mm EVA foam padding on shoulder straps

• 4 zippered compartments, D-rings and webbing

• Enlarged main compartment & two mesh pockets

Part No. Description UOM

13164 3L | Hi-vis Lime 1 Unit

13059 3L | Bladder replacement 1 Unit

KEY FEATURES: 5156

• Durable 600D water-resistant ripstop polyester

• Vented straps and back for maximum breathability

• 8mm EVA foam padding on shoulder straps

• Zippered compartment, D-rings and webbing

• Insulated pack and tube keeps water cool

Part No. Description UOM

13162 3L | Hi-vis Lime 1 Unit

13059 3L | Bladder replacement 1 Unit

2L LOW-PROFILE HYDRATION PACK

HYDRATION PACK PRESSURE PUMP AND

BLADDER CLEANING KIT

KEY FEATURES: 5158 /59

KEY FEATURES: 5155

• Durable 600D water-resistant ripstop polyester

• Insulated pack and tube keeps water cool

• 100% anti-microbial bite valve with cover

• Breakaway shoulder straps for additional safety

• Hi-vis options for added visibility

Part No. Description UOM

13156 2L | Hi-vis Lime 1 Unit

13157 2L | Hi-vis Orange 1 Unit

13057 2L | Bladder 1 Unit

5158 PRESSURE PUMP:

• FDA-approved food grade silicone body

• Valve cover keeps debris off bulb tip

• Fits all Chill-Its Hydration Packs

5159 CLEANING KIT:

• Drying rack to air dry bladder

• Bladder / delivery system / bite valve cleaning brush

• Compatible with any Chill-Its bladder

Part No. Description UOM

13158 5158 Pump 1 Unit

13159 5159 Cleaning Kit 1 Unit

PRYME.COM.AU

73


SHAX WORK SHELTER

POP-UP SERIES

POLYESTER CANOPY

WITH PU/UV

TREATMENTS AND

VENTED TOP

6000

REFLECTIVE AND

REINFORCED

FLAME

RESISTANCE

MEETS CPAI-84 CODE

ADJUSTABLE

MECHANICS

3m x 3m

10’X10’ FOOTPRINT

DURABLE

STEEL FRAME

74 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


HEAVY-DUTY COMMERCIAL TENT

WHAT IS CPAI-84??

The CPAI-84 (Canvas Products Association International) Standard

is widely used in the industry and has been adopted by states

such as California and New Jersey. It provides testing methods

for evaluating the flame resistance of fabric and other pliable

materials in camping tentage. It also provides performance

criteria and certification guidelines for suppliers (like Ergodyne)

and labelling requirements that identify a tent as being

constructed of flame-resistant materials and caution against

action detrimental to those flame-retardant finishes.

KEY FEATURES: 6000

• 10’x10’ (3mx3m) area, peak height of 14’ (4m)

• Polyester canopy w/ PU/UV treatments and

vented top, meets CPAI-84 code

• Powder coated steel frame with easy adjustment

• Heavy-duty ground stakes and ropes included

• Wheeled bag for storage/transport, 45lbs (20.4kg)

• Optional water-resistant tent weight bags available

Part No. Description UOM

12900

10’x10’ Heavy Duty Tent |

Hi-vis Lime

1 Unit

12998 Side Panel | Hi-vis Lime 1 Unit

12994

Tent Weight Bags | Black |

2-pack

1 Unit

PRYME TIP:

Easy access to shade is an important part of heat stress management

on the work site

OPTIONAL TENT

WEIGHT BAGS

AVAILABLE

PRYME.COM.AU

75


N-FERNO

WINTER WARMING

100%

POLYESTER

KNIT

ONE SIZE

6815

TWO AVAILABLE

STYLES

HALF CAP AND FULL FACE

76 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


STRETCH CAP

FLEECE BALACLAVA

KEY FEATURES: 6810/15

• 100% polyester knit

• 6810: Half cap style

• 6815: Full face style

• One size

Part No. Description UOM

16810 6810 Half Cap 12 Units

16815 6815 Full Face 12 Units

FR NOMEX® BALACLAVA

KEY FEATURES: 6821

• Polyester fleece for warmth

• Long length

• Reflective accent for higher visibility

Part No. Description UOM

16821 Black 12 Units

2-WAY 2-LAYER FR LINER

NFPA 70E CAT 1

ATPV 9.7 CAL/CM 2

KEY FEATURES: 6825

• FR Nomex® fleece

• Arc-rated; ATPV of 9.7 cal/cm2

• Reflective accent for higher visibility

• Stretchable and comfortable

• Meets ASTM F1506; classified to NFPA 70E (CAT 2)

Part No. Description UOM

16825 Black 6 Units

NFPA 70E CAT 1

ATPV 17 CAL/CM 2

KEY FEATURES: 6885

• Top: FR modacrylic twill with FR modacrylic fleece

• Lower: Double layer FR modacrylic rib knit

• Nomex® metal zipper

• Warming pack pockets / Hook & loop straps

• Meets ASTM F1506; classified to NFPA 70E (CAT 2)

Part No. Description UOM

16885 Black 6 Units

PRYME.COM.AU

77


78 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS

WANT TO FIND OUT MORE?

sales@pryme.com.au

OR WATCH OUR ONLINE PRODUCT VIDEOS:

www.pryme.com.au/video-library


HYDRATION

THAT WORKS

Weekday workers or weekend warriors,

from the oil fields to the footy fields,

Sqwincher ® has the perfect package,

flavour and formulation designed to

satisfy the toughest hydration needs.

HYDRATION HEALTH

MADE EASY

PRYME.COM.AU

79

79


EFFECTS OF DEHYDRATION?

IT ONLY TAKES 2%

OF DEHYDRATION

TO RESULT IN UP TO

A 50% DECREASE IN

WORK AND MENTAL

PERFORMANCE.

CONTACT US FOR

YOUR HYDRATION

PLAN TODAY!

sales@pryme.com.au

To ensure a safe working environment, an adequate supply

of cool drinking water and providing Sqwincher ® electrolyte

replenishment is crucial for the prevention of dehydration,

heat stress, injury and in the worst cases, death.

What you may not know is that Dehydration is also problematic

during winter. This is called cold stress. It can be even more

hazardous in cold weather due to thirst suppression, lack of

perspiration, diuretics and increased urination.

DANGERS POSED BY HEAT STRESS

54º C+

Imminent heat stroke or sunstroke.

38º – 54º C

Probable sunstroke, heat cramps and heat

exhaustion and possible heat stroke with

prolonged exposure and physical activity.

32º – 38º C

Possible sunstroke, heat cramps and

heat exhaustion with prolonged exposure

and physical activity.

TIPS ON MONITORING HYDRATION

URINE CHART

Urine colour is a great

indication of your body

fluid levels.

SEVERELY DEHYDRATED

DEHYDRATED

HYDRATED

OVER HYDRATED

REQUIRED WATER

3.0 L

2.2 L

RECOMMENDED

ELECTROLYTES

During strenuous activity as

well as in colder environments;

180 - 300ml of electrolytes

every 15 - 20 minutes.

80 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


Being a Safety Professional we look for things with low sodium in it. The other products

have low sugar but sodium is through the roof. Sqwincher ® has the best of the two.”

BRYAN E. SAFETY PROFESSIONAL

HOW TO ENCOURAGE

HYDRATION

MANDATE WATER BREAKS

Have employees take three-minute

breaks at regular intervals throughout

the day. Keep large jugs of cold

filtered water easily accessible.

POST HYDRATION REMINDERS

Sometimes workers simply forget

to drink until that feeling of thirst

creeps up.

PROVIDE REUSABLE BOTTLES

These encourage workers to

keep water and other fluids

on hand at all times.

5 KEY REASONS

Sqwincher®

IS THE LEADER IN HYDRATION

1 2 3 4 5

GREAT

TASTE

SUPERIOR

PACKAGING FOR

HOT WORKPLACES

ELECTROLYTES

POWER YOUR

BODY’S NATURAL

PROCESSES

LOW SODIUM–

ELECTROLYTE

REPLENISHMENT

LOW COST

PER SERVE

REGULAR, FROZEN,

& SUGAR FREE

OPTIONS

Sqwincher ® has served Australasian workers since

1999 and is trusted by many leading companies, fire,

emergency services & defence force organisations to

provide safe & effective hydration to their workers.

PRYME TIP:

It costs less to prevent a heat related accident or illness than it does

to recover from one.

PRYME.COM.AU

81


QWIK STIKS

SUGAR FREE ELECTROLYTE

ENHANCED SACHETS

KEY FEATURES:

LOW SODIUM

CAFFEINE-FREE

GLUTEN-FREE

SUGAR FREE

FOR LOW CALORIES

CONVENIENT

SINGLE SERVE PACKAGING

PORTION CONTROL SACHETS FOR

ON-THE-GO USE

GREAT TASTE

FOR INCREASED FLUID CONSUMPTION

PRYME TIP:

Just add one Qwik Stik

to a 600ml water bottle,

shake and enjoy!

Part No. Description Flavour UOM

SQ0104 Qwik Stiks | 50 Pack Mixed Flavours 1 Case (10 Packets)

SQ0100 Qwik Stiks | 50 Pack Orange 1 Case (10 Packets)

SQ0101 Qwik Stiks | 50 Pack Mixed Berry 1 Case (10 Packets)

SQ0103 Qwik Stiks | 50 Pack Lemonade 1 Case (10 Packets)

SQ0106 Qwik Stiks | 50 Pack Grape 1 Case (10 Packets)

SQ0107 Qwik Stiks | 50 Pack Lemon Lime 1 Case (10 Packets)

SQ0109 Qwik Stiks | 50 Pack Cool Citrus 1 Case (10 Packets)

82 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


To put Sqwincher ® to the test, I have been using and testing it for many months

in a variety of training and working situations, as I prepare for ultra-marathons.

I can carry several hour’s worth of Sqwincher ® sugar free Qwik Stiks in my pocket

and as long as I have access to water, presto my electrolyte needs are taken care

of. The best part is that Sqwincher ® is fantastic on my stomach and remains

palatable no matter what the temperature or how long it is in my bottle.”

COACH JEFF, ULTRA MARATHON RUNNER, PROFESSIONAL SPORTS TRAINER

EACH PACKET

CONTAINS 50

QWIK STIKS

EACH CASE

CONTAINS 10

PACKETS

Sqwincher’s ® sugar free

electrolyte powder, also

called Qwik Stiks, are

an electrolyte enhanced

beverage, which contains

zero sugar. Qwik Stiks

come in single serve

sachets, which are ideal

for on-the-go use as well.

EASY!

ADD ONE QWIK

STIK TO A 600ML

WATER BOTTLE

PRYME.COM.AU

83


SQWEEZE ® POPS

ELECTROLYTE ENHANCED

FROZEN POPS

KEY FEATURES:

LOW SODIUM

CAFFEINE-FREE

GLUTEN-FREE

CONVENIENT

SINGLE SERVE PACKAGING

ONCE FROZEN THEY ARE

READY TO EAT

FROZEN FORMAT

HELPS COOL CORE BODY TEMPERATURE FAST

ALSO AVAILABLE IN TWO

SUGAR FREE ZERO FLAVOURS

- SEE CHART BELOW

GREAT TASTE

FOR INCREASED FLUID CONSUMPTION

Part No. Description Flavour UOM

SQ159200201 Sqweeze Pops | 10 Pack Mixed Flavours 1 Case (15 Packets)

SQ159200228 Sugar Free Sqweeze Pops | 10 Pack Fruit Punch 1 Case (15 Packets)

SQ159200229 Sugar Free Sqweeze Pops | 10 Pack Tangerine Orange 1 Case (15 Packets)

84 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


An outstanding feature of the Sqwincher ® range of products is that they contain

some of the lowest sodium contents on a per serve basis of any product in the

market. This is an important benefit for any individual who wishes to maintain good

hydration whilst managing a low sodium outcome in their daily dietary regime.”

PETER SKARSHEWSKI, FOOD TECHNOLOGIST, FOOD FOR THOUGHT CONSULTING

Sqwincher ® pops

When you need quick

hydration on the job or in

the field, reach for the unique

frozen solution designed

to help you replace what

the body sweats out.

Flavours included are:

Orange, Mixed Berry,

Lemon- Lime, Cherry,

and Grape.

EACH PACKET

CONTAINS 10

SQWEEZE ® POPS

EACH CASE

CONTAINS 15

PACKETS

FREE

CHEST FREEZER

GET IN QUICK!

VALID ONLY WHILE STOCKS LAST

Large size that fits 900 Pops

l:96cm x w:56cm x h:85cm

For more details contact us

at sales@pryme.com.au

PRYME.COM.AU

85


LIQUID CONCENTRATE

2L ELECTROLYTE

ENHANCED CONCENTRATE

KEY FEATURES:

Each Sqwincher ® 2 Litre Liquid

Concentrate bottle yeilds 20

litres of finished product. Mix

one bottle into a 20 Litre Cooler,

add water and ice to create a

hydration station that will keep

fluid cold for up to 12 hours.

LOW SODIUM

GLUTEN-FREE

CAFFEINE-FREE

GREAT TASTE

FOR INCREASED FLUID CONSUMPTION

EACH BOTTLE

MAKES 20L

SQWINCHER ®

EACH CASE

CONTAINS 6

BOTTLES

Part No. Description Flavour UOM

SQ0028 2L Concentrate Lemon Lime 1 Case (6 Bottles)

SQ0042 2L Concentrate Orange 1 Case (6 Bottles)

SQ0046 2L Concentrate Wildberry 1 Case (6 Bottles)

SQ0047 2L Concentrate Tropical Cooler 1 Case (6 Bottles)

SQ0050 2L Concentrate Grape 1 Case (6 Bottles)

SQ0052 2L Concentrate Lemonade 1 Case (6 Bottles)

SQ0051 2L Concentrate Mixed Flavours 1 Case (6 Bottles)

86 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


Sqwincher as a preventative therapy, tastes great, is scientifically formulated

and will aid in the effects of dehydration.”

JO-ANNE COLEMAN, REGISTERED NURSE

20L

COOLER

PERFECT FOR USE WITH

SQWINCHER ® CONCENTRATE

Part No. Description UOM

SQ01 20L Cooler 1 Unit

SQ10 Replacement Spigot 1 Unit

SQ11 Replacement Lid 1 Unit

For more details

contact us at

sales@pryme.com.au

PRYME.COM.AU

87


LIQUID CONCENTRATE

500ML ELECTROLYTE

ENHANCED CONCENTRATE

KEY FEATURES:

Sqwincher ® liquid

concentrates are designed

to help replenish fluids

and electrolytes, keeping

people with hard working

lifestyles going. Liquid

concentrates mix readily

with water and it’s unique

formulations designed to

help reduce the fatigue and

cramping associated with

hot environments

and intense workouts.

EACH BOTTLE

MAKES 5L

SQWINCHER ®

EACH MIXED

CASE CONTAINS

12 BOTTLES

SMALL BOTTLE

FOR ON-THE-GO USE

LOW SODIUM

GLUTEN-FREE

CAFFEINE-FREE

GREAT TASTE

FOR INCREASED FLUID CONSUMPTION

Part No. Description Flavour UOM

SQ0034 500ml Concentrate Mixed Flavours 1 Case (12 Bottles)

88 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


Sqwincher ® was introduced into our Steelmaking plant in mid-2000 with

better than anticipated results. Since this introduction, there has not been

one reported incident of heat exhaustion/fatigue, or work related collapse,

remembering the conditions can be extreme during summer.

Due to the varied packaging it is possible for even the most mobile of workers

to have Sqwincher ® on hand anytime, anywhere. The results are not only

in the reported injury stats, but also in the workers. Based on these facts,

Sqwincher ® is an important asset on the production/maintenance lines.”

WENDY DEEG, REGISTERED NURSE

STRONG RUST

PROOF PLASTIC

BPA FREE

3.8L

COOLER

PERFECT FOR USE WITH

SQWINCHER ® CONCENTRATE

Part No. Description UOM

SQ04 3.8L Cooler 1 Unit

For more details

contact us at

sales@pryme.com.au

PRYME.COM.AU

89


FAST PACK

ELECTROLYTE ENHANCED FAST PACK

KEY FEATURES:

Sqwincher ® electrolyte replenishing

Fast Packs are easy to use, on-the-go,

electrolyte enhanced beverage. Simply tear

off the top of the packet , add water and

enjoy your drink straight from the pack.

POCKET SIZE PACK

FOR ON-THE-GO USE

COMES IN

BOXES OF 50

FAST PACKS

EACH CASE

CONTAINS 200

FAST PACKS

LOW SODIUM

GLUTEN-FREE

CAFFEINE-FREE

GREAT TASTE

FOR INCREASED FLUID CONSUMPTION

FAST PACK CONTAINS

180ML SQWINCHER ®

PRYME TIP:

Perfect for portion control and mobile workers

Part No. Description Flavour UOM

SQ0097 180ml Fast Pack | 50 Box Orange 1 Case (4 Boxes)

SQ0098 180ml Fast Pack | 50 Box Tropical Cooler 1 Case (4 Boxes)

SQ0099 180ml Fast Pack | 50 Box Wildberry 1 Case (4 Boxes)

SQ0066 180ml Fast Pack | 50 Box Lemon Lime 1 Case (4 Boxes)

90 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


The small size and convenient packaging allows me to take products out during

rides and runs. To any athlete who pushes their body to the limits and understands

the importance of hydration and electrolyte replenishment I recommend including

Sqwincher ® products as part of your nutritional plan”

EMMA COMAN-JEFFRIES, TRIATHELETE, WINNER QLD TRIATHLON SERIES 2010/11

Sqwincher ® Fast Pack ®

is a quick and convenient method to

replenish your electrolytes and rehydrate.

Made to easily tuck away and not get in the

way of your active lifestyle. Simply tear the

top open, add water to the fill line and drink.

PRYME.COM.AU

91


RETAIL PACKS

10 PACKS

QWIK STIKS 10-PACK

SQWEEZE ® POPS 10-PACK

FAST PACK 10-PACK

KEY FEATURES:

• Qwik Stiks Sugar Free Electrolyte Sachets

• Each packet contains 10 Qwik Stiks

• Each case contains 25 packets

•Retail-ready packaging

• Fits most common vending machines

• Hydration packets at hot workplaces,

where it’s needed the most

KEY FEATURES:

• Electrolyte Frozen Sqweeze Pops

• Each packet contains 10 Sqweeze Pops

• Each case contains 15 packets

• Retail-ready packaging

• Fits most common vending machines

• Hydration packets at hot workplaces,

where it’s needed the most

KEY FEATURES:

• Electrolyte Fast Pack

• Each packet contains 10 Fast Packs

• Each case contains 24 packets

• Retail-ready packaging

• Fits most common vending machines

• Hydration packets at hot workplaces,

where it’s needed the most

Part No.

UOM

Part No.

UOM

Part No.

UOM

SQWPX001

1 Case (25 Packets)

SQWPX002

1 Case (15 Packets)

SQWPX003

1 Case (24 Packets)

THE SQWINCHER ® FORMULATION IS THE

RESULT OF RESEARCH AND DEVELOPMENT

THAT GOES WELL BEYOND QUENCHING

THIRST TO DELIVER REHYDRATION FOR

THE TOUGHEST OF ACTIVITIES.

PRYME TIP:

Ideal for Vending Machines

92 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


ACCESSORIES

DRINK BOTTLES

ACRYLIC DISPENSER

SERVASTATION

KEY FEATURES:

• Branded drink bottle

• One bottle can contain up to 700ml of

Sqwincher ® for an ideal dilution ratio

• Clear coloured bottle

Part No.

SQBIKECLRC

UOM

Units

SQWEEZE FREEZE

GRAB & GO BAG

KEY FEATURES:

• Counter or wall mount display

• Easily dispenses Qwik Stiks

• Size: L: 26cm x W: 9cm x H: 33cm

Part No.

UOM

158205400 1 Case

MIXING PADDLE

KEY FEATURES:

• Sqwincher ® servastation holds

2L concentrate bottles in place

• 340ml Sqwincher ® cups fit in

the cup dispenser

• Pump spouts for 2L concentrate

bottles

• Cup Dispenser to easily dispense

the Sqwincher ® cups

Part No. Description UOM

SQ0160 Pump Spouts 12 per pack

SQ0158 340ml Cups 1 Case

SQ0161

Sqwincher

Servastation

1 Unit

SQ05 Cup Dispenser 1 Unit

KEY FEATURES:

• Easily carry your Sqweeze Pops

• Keeps your Sqweeze Pops frozen

• Expanded size: L:21.5cm x W:15cm x

H:45.5cm

Part No.

UOM

300360 1 Unit

KEY FEATURES:

Mixing paddle: used to mix Sqwincher with

water in a cooler

Part No.

SQW300309

UOM

1 Unit

For more details

contact us at

sales@pryme.com.au

PRYME.COM.AU

93


HYDRATION FACTS

AND WHITEPAPERS

HEAT STRESS

Performing strenuous work in hot and humid

conditions without adequate hydration can lead

to dehydration and heat stress, increased risk of

injury and in the worst cases death. It also leads

to considerably slow reaction time and difficulty

concentrating, which makes it unsafe to operate

machinery and vehicles.

Having an adequate supply of cool drinking water

and electrolytes such as Sqwincher ® , is crucial

when developing a proper hydration program.

DEHYDRATION CAUSES EFFECTS SIMILAR TO

ALCOHOL INTOXICATION

The bodies main electrolytes

BETTER TASTING WATER

Electrolytes are essential ions

in the human body for proper

electrical activity. Maintaining the

concentration of electrolytes is

crucial for proper fluid balance,

nerve function, muscle contraction,

and other physiological processes

in the body. The intake of

electrolytes is primarily through

fluids and foods. Electrolytes work

together to maintain homeostasis

and water equilibrium.

Sqwincher ® is specially formulated to create a palatable electrolyte

enhanced beverage to safely hydrate dehydrated workers

Studies show that when the taste and temperature of water is

modified to make a palatable beverage, there is increased fluid

consumption. Sqwincher ® is low in sodium, caffeine free and is

formulated to taste great without a salty after taste.

ELECTROLYTE REPLACEMENTS ARE NECESSARY

TO REMAIN PROPERLY HYDRATED

Duririg the summer months, hydration is a big topic. However,

dehydration can and does occur during winter months as well.

This is called cold stress. It can even be more hazardous in cold

weather due to thirst suppression, lack of perspiration, diuretics

and increased urination.

ELECTROLYTES POWER YOUR BODIES

NATURAL PROCESSES

NEED MORE INFO?

CONTACT PRYME TO RECEIVE THE

FOLLOWING WHITEPAPERS:

• Dehydration Overview

• Dangers of on the job

dehydration

• 5 factors that lead to

dehydration

• 6 signs of dehydration

workers should know

• Q&A Workers signs of

dehydration

• Q&A How to encourage

employee hydration

• Q&A Lifestyle choices

• 7 Factors that contribute to

heat stress

• Q&A What should I do if I

have heat stress?

• Sqwincher electrolytes

overview

• Electrolytes what are they

• Q&A Good ways to replenish

electrolytes

• Q&A What is hyponatremia?

• Hydration is not just a

summer issue

94 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


INDUSTRIAL SKIN

CARE SOLUTIONS

Pre-Work Creams, Skin Cleansing

and Skin Conditioning since 1923

PRYME.COM.AU

95


INDUSTRIAL SKIN PROTECTION

Occupational Contact Dermatitis (OCD) is accountable

for 75 percent of skin conditions in the workplace and

occurs in workers who are exposed to irritating or

allergenic substances or specific physical factors.

OCD and other skin issues are also largely preventable.

For almost 100 years, Peter Greven® Physioderm has been manufacturing products

for clean & healthy skin. The wide range of available products for effective protection,

cleansing and care of occupationally stressed skin, has made Peter Greven® Physioderm

one of the leading enterprises in the development and manufacture of occupational skin

care products.

Through its effective hand care plan, companies can now implement an easy to

understand process to combat occupational skin diseases.

PRIMARY CAUSES

OF OCCUPATIONAL

SKIN PROBLEMS:

Contact with oil,

grease, solvents and

degreasing agents

Pre-existing sensitive

skin or atopic

dermatitis (eczema)

Exposure to potentially

allergenic chemicals

Cold working

conditions

Exposure to

ultraviolet radiation

96 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


Prevent skin deterioration. Contact sales@pryme.com.au

THE 3 PILLARS OF OCCUPATIONAL SKIN CARE: PRODUCT SELECTION CHART

Application:

BEFORE WORK: PRE-WORK CREAMS

Dirt-repellent

pre-work cream

Universal pre-work

cream

Cement Lime I Cooling Agents I

Fertilizer I Dyestuff I Salt I

Cleaning Products I Disinfectants

I Fibreglass I Under Gloves I

Friction Work

Grease I Cutting Oils I Resins I

Thinners I Paint I Fats I

Adhesives I Metal Dust I

Organic Solvents I Cutting Oils I

Multi-component Resins

DURING WORK: INDUSTRIAL HAND CLEANERS

Hair, body and

Grease and grime I General washup

I Showering

hands cleaner

for light dirt

Industry type:

Concrete I Maintenance Area I

Fertilisers I Chemical Plants I

Lime Manufacturing I

Pulp and Paper Plants

Automative Workshop I Timber

Processing I Machine Shops I

Painters I Maintenance Sheds I

Boat Builders Refineries I Mobile

Mechanics I Fuel Depots I

Rail Maintenance

Light Duty Hand Cleaning I

Locker- and Rest Rooms I Offices

and Showers I General Industry

Extra heavy-duty

cleaner

Paint and adhesive

remover

Grease and grime I Metalic dust I

Ink, paint, and adhesives I

Oil, resin and varnish

Ink, paint, and adhesives I

Resin, and varnish I Lacquers

Extra Heavy Duty I Manufacturing

Sites I Metal Working I Energy &

Gas I Mining I Automotive

Automotive Paint and Body Work

I Heavy Manufacturing I Metal

Working I Silk Screen Printing

All purpose wipes

Embedded dirt I Ink I Tough

industrial grime I Surfaces and

tools without water

Machine Shops I Automotive and

Painters I Metal Working I Mobile

Mechanics I Boat Builders

AFTER WORK: MOISTURISING CARE

Concentrated

skin care cream

Cold Environments I Solvents

I Dry Climates I Friction I Skin

Conditioning I Dry, Damaged

or Cracked Skin

All Industry and skin types

PRYME.COM.AU

97


BEFORE WORK SKIN PROTECTION

Protecting the skin from harmful working materials, irritants and sensitizers

is an important step for maintaining skin integrity. Using an effective pre-work

cream or lotion can help prevent the skin from irritation, de-fatting and the

excessive adhesion of contaminants.

IMPROVES THE GRIP

ON TOOLS OR WORK

MATERIALS

PREVENTS THE

ADHESION OF

DIRT PARTICLES

FACILITATES THE

CLEANING OF THE

SKIN WHEN EXPOSED

TO STUBBORN SOILS

SILICONE FREE

98 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


Prevent skin deterioration. Contact sales@pryme.com.au

GREVEN ® MULTI TEC

Dirt-Repellent Pre-Work Cream

GREVEN ® REMO TEC

Universal Pre-Work Cream

KEY FEATURES:

• Improves the grip on tools or work materials

• Facilitates the cleaning of the skin when exposed to stubborn soils

• Prevents the adhesion of dirt particles

• Skin Compatible

• No messy fingerprints

• Silicone free

Part No. Description UOM

13042026 2000ml Soft Bottle 1 Case (6 bottles)

13042027 250ml Tube 1 Case (24 Tubes)

KEY FEATURES:

• Supports the natural regeneration of the skin

• Strengthens the upper layers of the skin exposed to stubborn soils

• Reduces skin irritation during work

• Skin Compatible

• Oil-in-water emulsion

• Silicone free

Part No. Description UOM

13402011 2000ml Soft Bottle 1 Case (6 bottles)

13402015 250ml Tube 1 Case (24 Tubes)

PRYME.COM.AU

99


DURING WORK HAND CLEANERS

Cleaning the skin of dirt, grease, grime and harmful germs is fundamental

to maintaining healthy skin. Peter Greven Physioderm’s wide selection of

skin care formulations clean and dissolve the toughest of dirt yet are gentle

enough to leave your hands feeling soft and refreshed.

100%

BIODEGRADABLE

RECYCLABLE

PACKAGING

SILICONE FREE

ALL NATURAL OLIVE

CORE SCRUBBERS

EXTRA HEAVY

DUTY CLEANING

100 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


Prevent skin deterioration. Contact sales@pryme.com.au

GREVEN ® HAIR, BODY & HANDS

GREVEN ® HEAVY DUTY WIPES

KEY FEATURES:

• Combines high-quality ingredients for a gentle and effective

everyday cleaner

• Conditioners to provide the skin and hair with a

balancing influence to eliminate dryness

• Multiple use without changing products

• Carefully formulated with re-moisturising agents to soften the skin

• Skin friendly, pH balanced

• Silicone free

Part No. Description UOM

13587008 2000ml Soft Bottle 1 Case (4 bottles)

13587007 250ml Bottle 1 Case (24 bottles)

GREVEN ® ACTIVE FORCE MP ECO

KEY FEATURES:

• Perfect for mobile users

• Dual texture, rough and smooth cleaning side

• Large surface area for extended use

• Pleasant mandarin scent

• Use without water

• 80 Wipes in a tin, 6 tins per case

Part No. Description UOM

13540010 Wipes Tin 1 Case (4 tins)

GREVEN ® ACTIVE ULTRA ANTI-BOND

KEY FEATURES:

• Solvent Free, no titanium dioxide

• Heavy duty cleaning

• All Natural olive core scrubbers (nut - free)

• Skin friendly, pH balanced

• 100% biodegradable

• Recyclable Packaging

• Silicone free

Part No. Description UOM

14060003 2000ml Soft Bottle 1 Case (4 bottles)

14060002 250ml Bottle 1 Case (24 bottles)

KEY FEATURES:

• Cleans skin when common skin cleaners fail to perform

• All natural olive core scrubbers (nut - free)

• Will not clog drains

• Contains dirt-removing ester oils

• Skin friendly, pH balanced

• Silicone free

Part No. Description UOM

12668029 2000ml Soft Bottle 1 Case (4 bottles)

12668028 250ml Bottle 1 Case (24 bottles)

PRYME.COM.AU

101


AFTER WORK MOISTURISING CARE

Skin that’s continuously damaged by harmful working materials or drying

elements becomes a weakness to the body and allows contaminants to

penetrate through the skin. Prevent harm or illness by restoring skin to its

natural state through the regular use of an after-care product.

REPLENISHES SKIN

MOISTURE AND LIPIDS

FAST ABSORBING AND

NON GREASY FEEL

SILICONE FREE

SUPPORTS

THE NATURAL

REGENERATIVE

PROCESS OF THE SKIN

102 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


Prevent skin deterioration. Contact sales@pryme.com.au

GREVEN ® CREME C

Concentrated Skin Care Cream

KEY FEATURES:

• Supports the natural regenerative process of the skin

• Replenishes skin moisture and lipids

• Fast absorbing and non greasy feel

• Light fragrance

• Silicone free

Part No. Description UOM

13361004 2000ml Soft Bottle 1 Case (6 bottles)

12985009 100ml tubes 1 Case (50 tubes)

PG SMART 2L DISPENSERS

SMART DISPENSER

- DISPENSES 1-2ML

PER PUSH (33% TO

100% LESS THAN

COMPETING BRANDS)

DOSAGE CAN BE

ADJUSTED IN 3 STEPS

KEY FEATURES:

• 1-2ml dispensed per push, 33% to 100% less than competing brands

• Lockable, long lasting, no maintenance

• Easy to mount and easy to load

• No clogging no leaking

• Attractive & durable polypropylene construction

Part No. Description UOM

13447007 2L Dispenser | Black 1 Unit

13880002 2L Dispenser | White 1 Unit

PRYME.COM.AU

103


104 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


PROTECTION

YOU CAN TRUST

Get more outdoor with Maxiblock

Sunscreens. Developed and

manufactured in Australia for

every outdoor occasion.

PRYME.COM.AU

105


AUSTRALIA AND

NEW ZEALAND

EXPERIENCE SOME OF

THE HIGHEST LEVELS

OF UV RADIATION

IN THE WORLD

DURING SUMMER.

PROTECT YOUR WORKERS AGAINST

THE DAMAGING SUN

There are two types of harmful rays of sunlight that reaches us;

UVA and UVB. UVA rays penetrate deep into the skin’s thickest

layer, the dermis.

Maxiblock’s Sunscreen is:

Non-greasy,

dry touch

Water resistant

for 4 hours

UVA / UVB

Broad Spectrum

sales@pryme.com.au

Advanced SPF 50+

formulation

Perfect for sensitive

skin, non-perfumed

106 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


MAXIBLOCK

SUNSCREEN RANGE

MAXIBLOCK ESSENTIAL SUNSCREEN

The go-to sun protection

for every outdoor occasion

• Dry-Touch

• Non-Greasy

• Fragrance Free

• Dermatological Tested Formula

MAXIBLOCK ZINCON SUNSCREEN

Mineral sunscreens

for sensitive skin

• Exceptional UVA Protection

• White or Tinted

• Rubs Clear

MAXIBLOCK OUTBACKER SUNSCREEN

Dual protection: sunscreen

and insect repellent

• Proven Efficacy

• Effective Against Flies and Mosquitoes

MAXIBLOCK ALOE VERA AFTER SUN

The natural moisturising

and hydrating properties

of Aloe Vera plants

• Alcohol Free

• Non-Greasy

• Fast Relief

• Helps Minimise Skin Peeling

AU/NZ 2604:2012 compliant

PRYME.COM.AU

107


SUNSCREEN RANGE

ESSENTIAL

KEY FEATURES:

SPF50+

VERY HIGH PROTECTION

AUSTRALIAN MADE

FOR HARSH CONDITIONS

4 HOURS

WATER & SWEAT RESISTANT

UVA & UVB

BROAD SPECTRUM

DRY TOUCH

TECHNOLOGY

SKIN FRIENDLY

DERMATOLOGICAL TESTED FORMULA

UVA ABSORBER

4% AVOBENZONE

SUNSCREEN ESSENTIALS PUMP PACKS

Part No. Description UOM

MB76651 1L Pump Pack 1 Case (4 Pump Packs)

MB76650 500ml Pump Pack 1 Case (24 Pump Packs)

108 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


ESSENTIAL TUBES

ESSENTIAL SPRAY

BOTTLE & LIP BALM

KINDER TUBE

KEY FEATURES:

• SPF50+ very high protection

• UVA & UVB broad spectrum

• 4 Hours water & sweat resistant

• Featuring dry touch technology for a light

natural skin feel

• Skin friendly dermatological tested formula

• Designed and made in Australia for

harsh conditions

• 4% avobenzone (UVA absorber)

Part No. Description UOM

MB76649 200ml Tube 1 Case (24 Tubes)

MB76646 100ml Tube 1 Case (24 Tubes)

KEY FEATURES:

• SPF50+ very high protection

• UVA & UVB broad spectrum

• 4 Hours water & sweat resistant

• Featuring dry touch technology for a light

natural skin feel

• Skin friendly dermatological tested formula

• Designed and made in Australia for the

harsh conditions

• 4% avobenzone (UVA absorber)

Part No. Description UOM

MB76648 250ml Spray Bottle 1 Case

(36 Bottles)

MB76643

10g Lip Balm

1 Case

(120 Units)

KEY FEATURES:

• SPF50+ very high protection

• UVA & UVB broad spectrum

• 4 Hours water & sweat resistant

•Featuring dry touch technology for a light

natural skin feel

• Skin friendly dermatological tested formula

• Designed and made in Australia for the

harsh conditions

• 45% less UV filters compared to

Maxiblock Essential range;

for delicate and sensitive skins

• 4% avobenzone (UVA absorber)

Part No. Description UOM

MB76746 100ml Tube 1 Case (24 Tubes)

PRYME.COM.AU

109


SUNSCREEN RANGE

ZINCON

KEY FEATURES:

SPF30

HIGH PROTECTION. MINERAL SHIELD

CONTAINING 22% ZINC OXIDE

AUSTRALIAN MADE

FOR HARSH CONDITIONS

4 HOURS

WATER & SWEAT RESISTANT

UVA & UVB

BROAD SPECTRUM

CLEAR & BRONZE

TINT

SKIN FRIENDLY

DERMATOLOGICAL TESTED

FORMULA FOR SENSITIVE SKIN

COMPLIANT

WITH LATEST 2012 TGA STANDARD

SUNSCREEN ZINCON TUBES

Part No. Description UOM

MB76627 50g Cream | Clear 1 Case (24 Tubes)

MB76626 50g Cream | Bronze 1 Case (24 Tubes)

110 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


SPF50+

VERY HIGH PROTECTION

AUSTRALIAN MADE

FOR HARSH CONDITIONS

4 HOURS

WATER & SWEAT RESISTANT

UVA & UVB

BROAD SPECTRUM

WHITE & BRONZE

TINT

SKIN FRIENDLY

DERMATOLOGICAL TESTED FORMULA

SUNSCREEN ZINCON STICKS

Part No. Description UOM

MB76654 12g Lip Stick | White 1 Case (120 Sticks)

MB76655 12g Lip Stick | Bronze 1 Case (120 Sticks)

PRYME.COM.AU

111


SUNSCREEN RANGE

OUTBACKER WITH INSECT REPELLENT

KEY FEATURES:

SPF50+

HIGH PROTECTION

AUSTRALIAN MADE

FOR HARSH CONDITIONS

4 HOURS

WATER & SWEAT RESISTANT

UVA & UVB

BROAD SPECTRUM

INSECT REPELLENT

EFFECTIVE AGAINST FLIES

AND MOSQUITOES. CONTAINS 7.2% DEET

SKIN FRIENDLY

DERMATOLOGICAL

TESTED FORMULA

APVMA APPROVED

COMPLIANT

WITH LATEST 2012 TGA STANDARD

SUNSCREEN ESSENTIALS PUMP PACKS

Part No. Description UOM

MB76602 1L Bottle 1 Case (4 Bottles)

MB76601 100ml Tube 1 Case (24 Tubes)

112 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


ALOE VERA

AFTER SUN

KEY FEATURES:

ALOE VERA GEL COOLS, MOISTURISES AND

REVITALISES SKIN DAMAGED BY SUNBURN, MINOR

BURNS, WIND, SEA OR OTHER HARSH CONDITIONS.

ALCOHOL FREE

FAST RELIEF

NON-GREASY

EASILY ABSORBED

SUITABLE FOR PEOPLE

WITH SENSITIVE SKIN

SKIN FRIENDLY

DERMATOLOGICAL TESTED

FORMULA

SUNSCREEN ESSENTIALS PUMP PACKS

Part No. Description UOM

MB76631 500ml Bottle 1 Case (12 Bottles)

MB76630 125ml Tube 1 Case (24 Tubes)

AUSTRALIAN MADE

FOR HARSH CONDITIONS

PRYME.COM.AU

113


CASE AND PALLET

INFORMATION

ERGODYNE

Model No. Description Purchase UOM Case UOM Case Length Case Width Case Height Case Weight

3180 Tool Tethering kit | 0.9kg 1 Unit 50 58.5 48.25 43.25 22.68

3181 Tool Tethering Kit | 2.3kg 1 Unit 50 58.5 48.25 43.25 17.01

3182 Tool Tethering kit | 4.5kg 1 Unit 50 58.5 48.25 43.25 22.68

3190 Tape Measure Kit 1 Unit 50 58.5 48.25 43.25 17.01

3191 Power Tool Kit 1 Unit 50 58.5 48.25 43.25 17.01

3192 Wrist Lanyard Kit 1 Unit 50 58.5 48.25 43.25 22.68

3193 Tape Measure Kit 1 Unit 50 58.5 48.25 43.25 17.01

3194 Screwdriver Tethering Kit 1 Unit

3195 Phone Tethering Kit 1 Unit

3740 Hand Tool Trap Slips | Small 6 Packets

3740 Hand Tool Trap Slips | Medium 6 Packets

3740 Hand Tool Trap Slips | Large 6 Packets

3740 Hand Tool Trap Slips | X-Large 6 Packets

3740 Hand Tool Trap Slips | 4 Sizes 6 Packets

3700 Web Tool Tails 6-pack 6 Packets 120 60 50 15 10.34

3103 Detachable loops 3-pack 6 Packets 120 60 50 24 9.25

3703 Elastic tool tails 3-pack 6 Packets 120 60 50 33 10.34

3713 Elastic tool tails with swivel 3-pack 6 Packets 120 60 50 33 10.34

3175 Accessory anchor 6 Anchors 60 36 27 21 14.97

3723 Shrink tool trap | 7.6cm 6 Traps 30 16 16 12 1.22

3724 Shrink tool trap | 10.2cm 6 Traps 20 16 16 12 1.45

3726 Shrink tool trap | 15.3cm 6 Traps 20 53 41 28 2.90

3790 Tool shackles 2-pack | small 6 Packets 192 48 38 13 9.58

3790 Tool shackles 2-pack | medium 6 Packets 152 48 38 13 11.72

3790 Tool shackles 2-pack | large 6 Packets 84 45 25 15 13.34

3790 Tool shackles 2-pack | x-large 6 Packets 54 45 25 15 14.70

3755 Self-adhering tape trap 6 Rolls 96 30.5 43.5 23 10.45

3760 Cellphone Trap - Sleeve | Standard 6 Traps

3760 Cellphone Trap - Sleeve | Plus 6 Traps

3765 Tablet Trap - Sleeve 6 Traps

3770 Tape measure traps 6 Traps 96 30 34 50 9.58

3775 Water Bottle / Cannister sleeve trap 6 Traps 60 40 30 21 5.99

3704 Wire Loop Tails 6 Traps

3705 Wire Screwgate Tool Tails 6 Traps

3796 Power Tool Trap - Drill/Impact Bracket 6 Traps

3797 Power Tool Trap - Grinder Bracket 6 Traps

All dimensions are in CM and weights in KG

114 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


Model No. Description Purchase UOM Case UOM Case Length Case Width Case Height Case Weight

3798 Power Tool Trap - Pneumatic Bracket 6 Traps

3780XL Power Tool Trap - Battery Wrap XL 6 Traps

3780L Power Tool Trap - Battery Wrap L 6 Traps 50 52 37 42 7.94

3780S Power Tool Trap - Battery Wrap S 6 Traps 50 42 32 32 5.67

3100fx Tool Lanyard Single Carabiner 6 Lanyards 150 60 50 24 12.93

3110fx Tool Lanyard Dual Carabiner 6 Lanyards 150 60 50 24 17.69

3108fx Single Locking Carabiner 6 Lanyards 150 60 50 24 17.01

3118fx Dual Locking Carabiner 6 Lanyards 90 60 50 24 15.51

3109fx Single Swiveling Locking Carabiner 6 Lanyards 96 56 46 28 16.11

3119fx Dual Swiveling Locking Carabiner 6 Lanyards 72 56 46 28 17.64

3102fx Single Carabiner Modular 6 Lanyards 180 60 50 31 19.60

3100 Tool Lanyard Single Carabiner Standard 6 Lanyards 96 60 50 24 9.14

3110 Tool Lanyard Dual Carabiner Standard 6 Lanyards

3101 SS Screwgate Carabiner Lanyard Standard

3111 SS Screwgate Carabiner Lanyard Standard

3311 SS Screwgate Triple Carabiner - Twinleg

3129 HD Lanyard Single Carabiner 6 Lanyards 54 60 30 20 24.49

3139 HD Lanyard Dual Carabiner 6 Lanyards 36 60 30 15 16.33

3114 Wrist tool lanyard carabiner 6 Lanyards 240 60 48 30 7.62

3115 Adjustable wrist tool lanyards 6 Lanyards 360 60 50 23 13.06

3130S Coil Tool Lanyard 6 Lanyards 96 47 40 31 18.29

3130M Coil Tool Lanyard 6 Lanyards 96 49 42 32.5 21.77

3150 Elastic Hard Hat Lanyard Buckle 360 62 62 22 16.33

3155 Elastic hard hat lanyard Clamp 24 Lanyards 360 62 62 22 16.33

3157 Coil Low Profile Lanyard Buckle 120 60 50 15 5.44

3158 Coil hard hat lanyard 6 Lanyards 120 60 50 15 5.44

3156 Coil Low Profile Lanyard Single Carabiner

3166 Coil Low Profile Lanyard Dual Carabiner

3000 Retractable Lanyard Single Carabiner 6 Lanyards 40 32 28 60 10.89

3001 Retractable Lanyard Dual Carabiner 6 Lanyards 40 32 28 60 9.07

3010 Retractable Lanyard Single Carabiner

3011 Retractable Lanyard Dual Carabiner

3025 Retractable Tool Tails Carabiner 6 Carabiners 50 48 33 17 10.21

3026 Retractable Tool Tails Loop 6 Loops 50 48 33 17 4.54

3400 Grabbers with dual clip mount 6 Grabbers 240 42 42 42 7.62

3405 Grabbers with belt clip mount 6 Grabbers 240 42 42 42 7.62

All dimensions are in CM and weights in KG

PRYME.COM.AU

115


CASE AND PALLET

INFORMATION

ERGODYNE

Model No. Description Purchase UOM Case UOM Case Length Case Width Case Height Case Weight

3540 Tie locking hooks 6 Hooks 300 70 47 42.5 12.25

5555 5-inch tool belts 6 Belts 40 66 44 40 19.78

5960 Canvas Hoist Bucket with D-rings 1 Bucket 8 67 34 35 11.79

5740 Leather Bottom Canvas 1 Bucket 8 67 34 35 11.79

5528 Tool parts bag topped canvas 1 Bag 24 61 55 37 9.80

5538 Tool parts bag topped tarpaulin 1 Bag 24 61 55 52 9.80

5527 Premium tool parts bag topped 1 Bag 8 48 40 34 5.44

5843 Tool backpack 1 Bag 4 54 42 46 10.52

9015fx Anti-Vibration Gloves with Dorsal 6 Pairs 50 60 59 26 18.14

9000 Anti-Vibration Gloves Lightweight 6 Pairs 100 61 52 28 20.87

900 Half-Finger Impact Gloves 6 Pairs 100 60 46 12 19.50

8955 Next Gen Bump Cap

8965 Next Gen Led Bump Cap

8945 Universal bump cap inserts 6 Inserts 48 41 41 41 4.35

8950 Bump caps 6 Caps 48 70 52 39 11.10

8960 Bump caps with led lighting 6 Caps 48 70 52 39 11.10

100 /

100HV

Economy back supports 6 Units 25 60.96 50.8 22.86 7.94

1500 Weight lifters support belts 6 Belts 20 60 50 23 6.35

335HL Slip resistant caps 6 Pairs 20 48 38 32 9.07

200 Knee pad short light duty 6 Pairs 80 52.7 47.6 24.8 9.07

230LTR

Wide Soft Cap Leather

367 Gel knee pad round cap 6 Pairs 12 46 34 29 7.08

355 Gel knee pad short cap 6 Pairs 12 46 35 34 9.25

350 Knee pad gel foam 6 Pairs 20 55 33 56 7.26

380 Kneeling pad | standard 1 Unit 10 55 37 31 6.99

385 Kneeling pad | large 1 Unit 10 73 42 31 10.21

390 Kneeling pad | extra large 1 Unit 10 93 47 31 15.01

6602 Cooling towel 6 Towels 100 41 46 61 17.69

6603 Cooling towel 6 Bands 200 78 27.5 29.4 18.14

6700 Cooling Wrap Tie 24 Units 264 30 49.5 33 7.18

6700CT Cooling Wrap Tie with Towel 24 Units 264 30 49.5 50 15.57

6700FR Cooling Wrap Tie Flame Resistant 6 Units 264 30 49.5 50 15.57

6710 Cooling Bandana 24 Units 264 42 49.5 30 11.97

6710CT Cooling Bandana with Towel 6 Units 264 42 49.5 30 18.57

6710FR Cooling Bandana Flame Resistant 6 Units 264 42 49.5 30 18.57

6685 Dry Evaporative Cooling Vest 1 Unit 40 41.91 41.91 41.92 10.34

All dimensions are in CM and weights in KG

116 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


Model No. Description Purchase UOM Case UOM Case Length Case Width Case Height Case Weight

6660 Hard Hat Brim with Neck Shade 50 Units 144 45 40 38 21.55

6609 Terry Hard Hat Liner Sweatband 24 Units 1008 60 49.5 42 27.43

6550 Terry Head Sweatband 192 52 46 17 5.23

6500 Terry Wrist Sweatband 192 52 46 20 6.97

6715 Hard Hat Pad with Polymers 264 35 49.50 40 4.79

6716 Hard Hat Liner with Polymers 24 Liners 264 60 49.5 15 7.18

6670CT Hard hat neck shade with CT 6 Units 336 60 49.5 60 19.81

6665 Evaporative cooling vest 6 Units 40 41.91 41.91 41.92 10.34

6485 Multi-band 12 Units 150 63 30.5 38 10.21

6486 Fire Resistance Multi-band 6 Units 150 63 30.5 38 11.57

6215 Premium Phase Change Vest 1 Unit 1 60.96 50.8 26.41 2.72

6215HV Premium Phase Change Vest Hi-Vis 1 Unit 1 60.96 50.8 26.41 2.72

6230 Standard Phase Change Vest 1 60.96 50.8 26.41 2.72

6250 Lightweight Phase Change Vest

6220 Replacement Charge Packs 1 Unit 10 60.96 50.8 26.42 18.14

6260 Replacement Charge Packs

6240 Ice Vest Extenders 1 Unit 150 23 54 20 3.40

5157 Hydration Pack 3L Cargo 1 Unit 15 58.42 48.26 46.72 12.32

5156 Hydration Pack 3L 1 Unit 15 58.42 48.26 45.72 9.25

5155 Hydration Pack 2L 1 Unit 15 58.42 48.26 45.75 9.87

5158 Pressure Pump 48 22.75 45.75 33 3.70

5159 Bladder Cleaning Kit 25 20.5 51 70 6.80

6000 Heavy-Duty Commercial Tent 1 Unit

6815 Winter caps full face 12 Caps 200 40.64 40.64 68.58 14.51

6810 Winter caps half face 12 Caps 300 40.64 40.64 68.58 21.77

6821 Balaclavas 12 Caps 108 60.96 50.8 35 6.86

All dimensions are in CM and weights in KG

PRYME.COM.AU

117


CASE AND PALLET

INFORMATION

SQWINCHER

Description Purchase UOM Case Length Case Width Case Height Case Weight Pallet Qty

Qwik Stiks 50-pack 1 Case 26 27 23 2.5 64 cases

Sqweeze Pops 1 Case 35 32 30 15 60 cases

2L Liquid Concentrates 1 Case 40 29 26 16 60 cases

500ml Liquid Concentrates 1 Case 37 17 18 8.3 90 cases

Fast Packs 1 Case 45 27 18 6 60 cases

20L Cooler 1 Case 34 34 50 6 30 cases

Sqwincher Clear Bike Bottle 1 Case 77 34 48 7.6 12 cases

Qwik Stiks 10-pack 1 Case 26 27 23 1.5 64 cases

Sqweeze Pops 10-pack 1 Case 45 27 18 15 60 cases

Fast Packs 10-pack 1 Case 35 32 30 10 60 cases

PETER GREVEN

Part No. Description Purchase UOM Case Length Case Width Case Height Case Weight Pallet Qty

13402011 Remo-tec cream 2000ml bottle 1 Case 24 24 30 10 75 cases

13402015 Remo-tec cream 250ml tube 1 Case 25 37 16 8 54 cases

13042026 Multi-tec lotion 2000ml bottle 1 Case 24 24 30 10 75 cases

13042027 Multi-tec lotion 250ml tube 1 Case 25 37 16 8 54 cases

14060003 Hand wash Eco Friendly 2000ml bottle 1 Case 24 24 30 10 75 cases

14060002 Hand wash Eco Friendly 250ml bottle 1 Case 27 20 26 9 54 cases

13587008 Hair, Body, and Hands 2000ml bottle 1 Case 24 24 30 10 75 cases

13587007 Hair, Body, and Hands 250ml bottle 1 Case 25 37 16 8 54 cases

12668029 Adhesive and Paint remover 2000ml bottle 1 Case 24 24 30 10 75 cases

12668028 Adhesive and Paint remover 250ml bottle 1 Case 25 37 16 8 54 cases

13540010 Heavy Duty Wipes Bucket 1 Case 20 42 42 9 36 cases

13361004

12985009

12905030

12905031

Spezial Creme C

- skin care cream 2000ml bottle

Spezial Creme C

- skin care cream 100ml tube

Spezial Lotion D

- skin care lotion 2000ml bottle

Spezial Lotion D

- skin care lotion 250ml bottle

1 Case 24 24 30 10 75 cases

1 Case 17 23 47 7 56 cases

1 Case 24 24 30 10 75 cases

1 Case 25 37 16 8 54 cases

13880002 2L Dispensers White 1 Case 19 19 40 2 120 cases

13880007 2L Dispensers Black 1 Case 19 19 40 2 120 cases

All dimensions are in CM and weights in KG

118 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


MAXI BLOCK

Part No. Description Purchase UOM Case Length Case Width Case Height Case Weight

MB76651 1L Pump Bottle 1 Case 23.5 16.5 20 4.4

MB76650 500ml Pump Bottle 1 Case 49 29 22 13.6

MB76649 200ml Tube 1 Case 37.5 21.5 21.5 6.3

MB76646 100ml Tube 1 Case 25 21 21 5.3

MB76648 250ml Spray Bottle 1 Case 53.5 29 21 12.1

MB76643 Lip Balm 1 Case 30 23 18 3.8

MB76746 Kinder 1 Case 25 21 21 3.11

MB76626 50g Zinc On Tubes Bronze 1 Case 22 18 14.5 1.8

MB76627 50g Zinc On Tubes Clear 1 Case 22 18 14.5 1.8

MB76655 12gm Zinc Stick Bronze 1 Case 36 24 21.5 3.8

MB76654 12gm Zinc Stick White 1 Case 36 24 21.5 3.8

MB76602 Outbacker 1L Pump Bottle 1 Case 23.5 16.5 20 4.4

MB76601 Outbacker 100ml Tube 1 Case 25 21 21 3.11

MB76631 Aloe Vera After Sun 500ml Pump Bottle 1 Case 31 22 21 6.82

MB76630 Aloe Vera After Sun 125ml Tube 1 Case 31 22 21 3.85

All dimensions are in CM and weights in KG

PRYME.COM.AU

119


PRYME TEAM

Terry Houlihan

Managing Director

terry@pryme.com.au

Sam Houlihan

Business Development Manager

sam@pryme.com.au

Melissa Dillon

Customer Service Manager

melissa@pryme.com.au

Krystal Chand

Administration Officer

krystal@pryme.com.au

Brad Houlihan

Business Development Manager

brad@pryme.com.au

Harish Chand

Financial Controller

harish@pryme.com.au

Debbie Taylor

New Zealand Customer Service

debbie@pryme.com.au

Green Fox Studio

Creative Agency

manager@greenfoxstudio.com.au

PRYME IS AN

INTERNATIONAL

LEADER IN PROVIDING

INNOVATIVE

WORKPLACE SAFETY &

WELLNESS SOLUTIONS.

Our market leading

brands are distributed

throughout Australia,

New Zealand,

Singapore and South

Africa, through a

network of authorized

distributors.

AUSTRALIA

Brisbane,

Queensland

PO Box 1298

Kenmore QLD 4069

P: +61 7 3374 4544

F: +61 7 3374 4768

E: sales@pryme.com.au

www.pryme.com.au

NEW ZEALAND

Expeditors, 21 Airpark Dr,

Mangere, Auckland, 2022

PO Box 98726

SAMC Auckland

P: +64 9 262 2205

F: +64 9 262 2298

E: sales@pryme.co.nz

www.pryme.co.nz

120 I PRYME AUSTRALIA I MARKET LEADER IN WORKPLACE HEALTH & SAFETY PRODUCTS


MAKING THE WORKPLACE

A BETTER PLACE SINCE 1999

PRYME I +61 7 3374 4544 I WWW.PRYME.COM.AU I HEAD OFFICE: 18/49 BELLWOOD BUSINESS PARK, DARRA, QLD 4076

Similar magazines