EN | Flyer | Baling hemp (Hanf) | Goeweil

BALING INDUSTRIAL HEMP
INTO ROUND BALES

GÖWEIL
MATERIAL
INDUSTRIAL HEMP
FOR SYNTHESIZING CBD OIL:
Industrial hemp is marked by a high concentration of CBD but contains
only a small percentage of the psychoactive ingredient THC,
allowing for the legal cultivation of permissible types of industrial
hemp.
The non-psychoactive agent cannabidiol – CBD for short – is found
primarily in the upper third of the hemp plant. The leaves and blossoms
are mainly processed into hemp oil and cosmetic products.
An extraction process is applied to harness the high quality CBD oil.
This oil boasts an abundance of vitamins and trace elements, which
help to soothe pain and inflammation, produce an anxiolytic and
calming effect, and can support the treatment of a large number
of diseases.

GÖWEIL
SILAGE ROUND BALES
THE ENSILING PROCESS:
The finely chopped biomass is packaged air-tight and stored. Due
to these anaerobic conditions, the process of lactic acid fermentation
ensues, consuming the residual sugars contained in the finely
chopped material. The silage therefore becomes acidified, preserving
the material.
INDUSTRIAL HEMP IN ROUND BALES:
Baling industrial hemp into compact silage round bales offers
a host of advantages:
• High compression during baling translates to perfect preservation
• Perfectly clean work flow without contamination of the material
• Simple and cost-efficient storage of the round bales
• Easy and hassle-free transport of the round bales

GÖWEIL OFFERS THE FOLLOWING SOLUTION FOR PROCESSING HEMP
LT-MASTER
BALER-WRAPPER COMBINATION
Stationary baler-wrapper combination with fully automatic program control:
• Bale diameters of 0.60 – 1.15 m (4’ x 2’ - 4’ x 4’)
• Suited for a multitude of finely chopped materials
• High compression, rapid exclusion of air and a perfectly clean production flow
• Setting up the machine is quick and easy
• A large selection of additional equipment

GÖWEIL OFFERS THE FOLLOWING SOLUTION FOR PROCESSING HEMP
VARIO-MASTER
BALER-WRAPPER COMBINATION
Stationary baler-wrapper combination with a variable bale chamber and fully automatic
program control:
• Variable bale size of 0.80 – 1.40 m (4’ x 2.5’ - 4’ x 4.5’)
• Suited for a multitude of finely chopped materials
• High compression, rapid exclusion of air and a perfectly clean production flow
• Setting up the machine is quick and easy
• A large selection of additional equipment

LT-MASTER & VARIO-MASTER
MATERIAL FLOW
The following is a step-by-step description of the functionality and material flow of the LT-Master and
VARIO-Master baler-wrapper combinations:
WRAPPER
BALER
3
6
4
5
Schematic diagram of the VARIO-Master with a variable bale chamber
Required work space
Space for the power unit:
Tractor or
Electric motor (blue)
1,773 x 1,323 mm [70 x 52 in]
Bale delivery ramp
Space for the bale deposit
30°
Bale delivery ramp
with bale tipper
[46.5 ft]
14170 mm
3500 mm
[11.5 ft]
Space for the feeding system:
Dumper, push-off trailer, truck, ...

CONTROL
Fully automatic
program control PROFI
The execution of all work
cycles is fully automatic
SLOPING
CONVEYOR
2
FEEDER
1
1
FEEDER
4
BALE CHAMBER
The chopped hemp is loaded into the large capacity
feeder
The bale is highly compressed inside the baler
2
SLOPING CONVEYOR
5
WRAPPING TABLE
The material is metered perfectly and transported
from the feeder to the sloping conveyor
The bale is picked up from the chamber by the
wrapping table and brought to the wrapper
3
SLOPING CONVEYOR / BALE CHAMBER
6
WRAPPER
The material drops from the sloping conveyor into
the bale chamber
The bale of hemp is wrapped perfectly and then
deposited

LT-MASTER & VARIO-MASTER
PHOTOS
The baler-wrapper combinations LT-Master and VARIO-Master have already been put through their
paces under the most varied harvesting conditions. The result: hemp silage bales baled and wrapped
to perfection!
1
2 3

IMAGE DESCRIPTION
1) LT-Master ready to bale
2) Work at night – the machine is lit perfectly thanks to the LED worklights
3) Field of industrial hemp
4) Fully baled and bound bale of hemp
4

GÖWEIL OFFERS THE FOLLOWING SOLUTION FOR PROCESSING HEMP
G-1 B5040
BUNKER BALER
Mobile baler-wrapper combination with fully automatic program control:
• Bale size of 1.25 m (4’ x 4’)
• Freshly cut hemp plants are compressed into bales directly on the field
• High compression, rapid exclusion of air, and a perfectly clean production flow
• Bales are deposited directly on the field
1 2

IMAGE DESCRIPTION
1) Field of industrial hemp
2) The hemp is cut at the upper third of the plant
3) The cut hemp is transported to the bunker
4) Baled and bound round bale of hemp
5) Bale deposit directly on the field
6) Wrapped round bale of hemp
7) Harvested field of hemp
INNOVATION
3 4
5
6
7

86,01027 // EN
GÖWEIL Maschinenbau GmbH
Davidschlag 11, 4202 Kirchschlag // AUSTRIA
Tel.: +43 (0) 7215 2131-0 // Fax.: +43 (0) 7215 2131-9
office@goeweil.com // www.goeweil.com