Oscillators and Beacon Transmitters - Kuhne electronic
Oscillators and Beacon Transmitters - Kuhne electronic
Oscillators and Beacon Transmitters - Kuhne electronic
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Beacon</strong> <strong>Transmitters</strong><br />
MKU 13 BAKE<br />
MKU 10 BAKE<br />
23 cm B<strong>and</strong><br />
1,2 cm B<strong>and</strong><br />
Features<br />
• Temperature stabilized crystal oscillator for high frequency stability<br />
• Optional: connector for external source (e.g. OCXO) - please request!<br />
• Helical filters <strong>and</strong> microstrip filters for high spurious <strong>and</strong> harmonic rejection<br />
• Compact construction in a German Silver case<br />
• Optional: milled aluminium case - please request!<br />
Applications<br />
• <strong>Beacon</strong> transmitters to explore radio propagation (amateur radio)<br />
• Signal source for measurement equipment<br />
Specifications<br />
Type<br />
Center frequency<br />
Output power<br />
Crystal frequency (st<strong>and</strong>ard)<br />
Multiplication factor<br />
CW keying (telegraphy)<br />
CW input connector<br />
Supply voltage<br />
Current consumption<br />
Output connector<br />
Case<br />
Dimensions (mm)<br />
Weight<br />
Possible Options<br />
MKU 13 BAKE<br />
1296.9 MHz<br />
typ. 800 mW<br />
108.075 MHz<br />
12<br />
A1, F1<br />
feed-through capacitor<br />
+12 ... 14 V DC<br />
typ. 500 mA<br />
SMA-female / 50 ohms<br />
German Silver<br />
74 x 56 x 30<br />
typ. 100 g<br />
01<br />
MKU 10 BAKE<br />
10368.9 MHz<br />
typ. 200 mW<br />
108.009 MHz<br />
96<br />
F1<br />
Feed-through capacitor<br />
+12 ... 14 V DC<br />
typ. 280 mA<br />
SMA-female / 50 ohms<br />
German Silver<br />
111 x 55 x 30<br />
typ. 160 g<br />
01; 02<br />
Important Notes<br />
• Please specify the required beacon frequency in<br />
your order. If the frequency is not specified, the<br />
st<strong>and</strong>ard frequency will be supplied (see table).<br />
• At option 01 the frequency of the ext. oscillator is<br />
calculated as follows: Oscillator frequency = wanted<br />
output frequency : multiplication factor<br />
Options<br />
• Option 01: SMA-female connector for external<br />
oscillator (without internal oscillator)<br />
• Option 02: milled aluminium case<br />
75<br />
<strong>Oscillators</strong>