You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OBD2 Live Data Mode<br />
CUSTOMIZING LIVE DATA (PIDs)<br />
CUSTOMIZING LIVE DATA (PIDs)<br />
This feature lets you customize the CanOBD2&1 <strong>Scan</strong> <strong>Tool</strong> display to<br />
show only those PIDs that are of interest at the current time. You can<br />
customize the Live Data display by placing the CanOBD2&1 <strong>Scan</strong> <strong>Tool</strong><br />
in "Custom Live Data" mode and selecting only the PIDs that you wish<br />
to display. To customize the Live Data display, proceed as follows:<br />
1. With the CanOBD1&1 <strong>Scan</strong> <strong>Tool</strong> in<br />
"Live Data" mode (see VIEWING LIVE<br />
DATA on page 47 for details), press and<br />
hold the ENTER/LD button until the<br />
"Mode Selection Menu" appears.<br />
2. Use the UP and DOWN buttons,<br />
as necessary, to highlight Live Data<br />
Menu, then press the ENTER/LD<br />
button.<br />
� The "Live Data Menu" displays.<br />
3. Use the UP and DOWN buttons, as<br />
necessary, to highlight Custom Live Data,<br />
then press the ENTER/LD button.<br />
� The "Custom Live Data" menu<br />
displays, with the first PID in the<br />
menu highlighted.<br />
4. Use the UP and DOWN buttons<br />
to scroll through the available PIDs.<br />
When the PID you wish to display is<br />
highlighted, press the ENTER/LD<br />
button to select it (a "checkmark" will<br />
show in the checkbox to the right of the<br />
PID to confirm your selection). Repeat<br />
the procedure until only the PIDs you<br />
want to display have all been selected.<br />
� To deselect a currently selected PID, highlight the PID, then<br />
press the ENTER/LD button. The checkmark will be<br />
removed from the checkbox.<br />
5. When you are finished making your selection(s), scroll to the end of<br />
the PID list and highlight the word DONE, then press the ENTER/LD<br />
button.<br />
� The CanOBD2&1 <strong>Scan</strong> <strong>Tool</strong> is now in "Custom Live Data" mode.<br />
Only the PIDs you selected are shown on the CanOBD2&1 <strong>Scan</strong><br />
<strong>Tool</strong>s display.<br />
� To toggle between the "Custom Live Data" display and the full<br />
Live Data display, momentarily press the ENTER/LD button.<br />
� To exit the "Custom Live Data" mode, press and hold the<br />
ENTER/LD button until the “Mode Selection Menu” displays.<br />
48 CanOBD2&1