07.12.2020 Views

Leyton 2020 KBB catalogue

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

KITCHEN BEDROOM & BATHROOM LED LIGHTING

1


CONTENTS

Lighting for kitchens, bedrooms 3

and bathrooms

How to plan your lighting design 4

Lighting function 7

Colour & function 8

Lighting multifunction spaces 11

Lighting control 14

Smart control 16

LED tape & profile 19

White LED tape 22

Changeable white LED tape 24

Colour changeable (RGB) LED tape 26

Dotless & seamless LED tape 28

Flexible linear light LED 30

White side‐emitting LED tape 31

LED tape profile 33

Surface profile 36

Recessed profile 38

Specialist profiles 40

Cabinet lighting 43

COB LED lighting 44

Driverless LED lighting 47

LED lighting 48

Changeable white LED lighting 50

Motion sensor LED lighting 52

Strip lighting 54

Plinth lighting 57

Ceiling lighting 59

Ceiling downlights 60

Pendant lighting 65

Contemporary pendants 66

Statement pendants 70

Glass pendants 71

Vintage pendants 72

Lamps for pendants 74

Bathroom lighting 77

Bathroom cabinet lighting 78

Ceiling floor and wall lighting 80

Other lighting & accessories 83

Other lighting 85

Powerports and chargers 86

Sensors, drivers & controllers 89

2All measurements in this brochure are in millimetres unless otherwise stated.


Lighting for kitchens,

bedrooms and bathrooms

In an age where the spaces we inhabit are becoming

multifunctional with their traditional usages becoming

blurred, effective lighting design has become more

important than ever. Lighting design not only enhances

interior designs but also creates different mood spaces

within the same room and, in doing so, expands its use

and function.

In this edition of Leyton KBB we will introduce you to

the concepts needed to create different lighting moods,

show you the fittings required to realise your vision and

explain the controls available for your customers to

switch between different lighting schemes easily.

3

3


How to plan your

lighting design

The key to any successful lighting design is to lay down

different types of light in layers.

A good place to start is the background or ambient lighting.

If the room has a clear function (such as a bedroom or

bathroom) choose a brightness and colour temperature

that best suits it. If the room has many functions, you might

want to think about the use of smart lighting or secondary

lighting to replace the ambient light when it is turned off.

Next, consider the specific activities that happen in the

room. Remember, a room with a relaxed ambient light may

still require areas of strong, purposeful light. Examples of

this are reading lights in the bedroom or shaving lights in

the bathroom. This is often referred to as task lighting.

Now, look at introducing your accent lighting. Use this

light to illuminate decorative detail, colours, textures or

architectural features.

Lastly, if appropriate, add your pendant lighting. These

pieces, typically, are beautiful objects in their own right.

They may be used as ambient, task or accent lighting.

ambient lighting

task lighting

accent lighting

pendant lighting

By blending all of these different layers of light together

you will create a space that is lit practically, appropriately

and beautifully.

4


Design by JS Geddes

5


6

Design by Schuller


Lighting function

There are three lighting groups you need to consider when

lighting a room. Using all three will not only give you a great

overall effect but will provide flexibility to perform the wide

range of functions the room may need to accommodate. This

is especially important in kitchens. The change from a bright,

energetic light for daytime tasks, to a relaxed space after

work and through to an intimate atmosphere for evening

dining should be seamless and effortless.

Ambient lighting

Ambient lighting is a room’s overall

illumination. It takes many forms

including ceiling mounted or recessed

fixtures that direct light downwards and

wall lights and uplighters that wash both

walls and ceiling with light.

Task lighting

Task lighting is functional lighting that

helps you with everyday activities –

preparing food, reading and dressing.

Under cabinet lights, spot lights and

strip lights are all obvious examples of

task lighting.

Accent lighting

Accent lighting adds drama to a room

and can significantly affect its mood.

Careful placement of accent lighting

allows you to change the room from

a bright, energetic space to a relaxed

sanctuary instantly.

7


Colour & function

The colour, or temperature, of white light is an important consideration when

creating a lighting design. White light temperature ranges from warm evening

light (with a low kelvin measurement) through noon-time neutral light to bright,

cool white (with a high kelvin measurement). Each has its place in your overall

lighting scheme.

Extra warm white

2700 Kelvin

In multifunctional rooms, such as

kitchens and bathrooms, a room may

need to switch between different white

temperatures. In these instances,

choosing lighting that can be changed

through WiFi enabled applications or

other devices is particularly helpful.

Choosing the right white temperature

for ambient lighting

The primary function of the room

will often help you decide on the

temperature of the ambient white light.

Rooms used at the end of the day or

spaces where you enter from the dark

tend to be more suited to a warmer

temperature colour. Entrance hallways

and living areas are good examples of

this. If it is a multifunction room, choose

a neutral white tone or a smart lighting

system that will allow you to switch

between temperatures. The physical

characteristics of the room can also

indicate the best temperature to use.

Contemporary spaces with large

flat planes are best suited to a cool

or neutral white colour, while more

traditional room designs, with expanses

of wood features, might benefit from a

warmer white temperature.

Choosing the right white temperature

for task lighting

The tone of white for task lighting

depends somewhat on the activity

undertaken. A warmer white temperature

is generally easier on the eye when

reading, but if you are cooking or

preparing food it is preferable to have a

neutral white colour so you can judge the

food's freshness or readiness to serve.

White colour and accent lighting

The choice of white colour in lighting

individual objects or spaces depends on

the object or space you are highlighting.

The temperature of white light affects

our perception of the colour it is

illuminating. It's important to bear

this in mind if you have an interior

design with a strong colour motif. A

cooler white colour looks great with

contemporary work surfaces and

chrome accessories, whereas a warm

white colour might be more appropriate

with wood and highlights gold flecks in

high gloss granite beautifully. For extra

ambience especially with dark woods

extra warm white tapes are becoming

increasingly popular.

8


Warm white

3000 Kelvin

Neutral white

4000 Kelvin

Cool white

6500 Kelvin

9


10


Lighting multifunction spaces

Daytime lighting palette

Using a mix of ambient, task and accent lighting you can create

very different environments within the same room. Here's an

example of how a combination of different lighting can be used

to create a design for a daytime task-orientated kitchen.

Task – in-cabinet lighting

Automatically activated by discreet sensors when the doors

are opened, these purely functional LED spotlights do not

affect the overall lighting scheme of the room.

Ambient – ceiling spot lighting

A bright array of overhead LED spot lighting, suitable for a

busy kitchen environment, can be dimmed as the function of

the room changes.

Task – under-cabinet lighting

Under-cabinet COB spot lights provide an even illumination

across the worktop surface and the splashback.

Task – under-cabinet lighting

Strong, bright task lighting, in this instance in the form

of undercabinet RGB & White LED tape, provides a bright

continuous expanse of light for manual activity.

11


12


Evening lighting palette

Here's the same room with a different combination of lighting

activated to create a lighting design perfect for the end of the

day wind down.

Accent - above cabinet lighting

LED tape, running along the tops of these cabinets, creates a

soft wash of warm light against the back wall and ceiling.

Accent - in-cabinet and shelf lighting

A mixture of LED shelf tape housed in a recessed profile and

light fixtures remain on in this evening setting to provide focused

areas of interest and to provide a sense of depth to the room.

Accent - island lighting

LED tape is used both under the worktop surface and on the

plinth to make a feature of the island.

Accent - plinth lighting

Plinth lighting around the main body of cabinets throws light

on the floor creating a softly lit walkway.

Simple to control

Control of sophisticated lighting

schemes like this is now simple.

The latest range of smart

lighting, along with control units

and WiFi enabled apps and

voice control devices, such as

Alexa, make switching between

lighting schemes effortless.

13


Lighting control

As multifunctional, open spaces have become more commonplace in room design

so the need to change the mix of ambient, task and accent lighting throughout

the day has become more important. Altering this mix manually can be time

consuming and laborious. By using the right control technologies you can

effortlessly switch between combinations of light and completely transform the

mood and function of a room in an instant. Here are a few of the ways to control

your lighting schemes.

Automatic control

This ranges from simple switches and sensors that

activate lighting inside a cabinet when the door is opened,

to sophisticated gestural control sensors that can control

the brightness of light depending how close your hand is.

These controls are not only functional and practical, but

deliver light on demand without upsetting the ambient

mood of the room.

Dimmers

Dimmers are still a very useful way of controlling large

areas of light simply and intuitively. Our latest range

of LED drivers now enable you to control LED lighting

consistently and sensitivity from a standard wall

dimmer. This is a breakthrough for LED lighting and

can be used with your room’s ambient lighting or with

groups of accent or task lighting.

14


Four zone control

A great balance between simplicity and flexibility, four

zone or scheme dimming controls allow you to adjust

the brightness, colour temperature and colour of

lighting in up to four different zones, either individually

or collectively. The controls can be either wallmounted,

remote or app controlled. The wall-mounted

panel works wirelessly with a receiver, and has a range

of 20m for the remote control.

Home automation systems

The ultimate in lighting control. With the correct

interfaces, our LED lighting can seamlessly integrate

with home automation systems such as Lutron

and Rako. These advanced systems also integrate

with other technology allowing you to change your

visual environment at the touch of a button. These

can automatically change to suit the time of day or

even the season.

15


Smart control

One of the biggest recent advancements

in lighting has been the use of WiFi

to control lighting units. Most of the

LED lighting in this KBB book can be

integrated into a WiFi network with

a controller that simply plugs into

the lighting driver. You can find these

controllers on page 93.

Once on a WiFi network there are a

couple of different ways to program

and control your lighting. A variety of

standalone operating platforms exist

in lighting eg Wiz. However, for ease

of use these can all be simultaneously

controlled via a voice control app such

as Amazon Alexa or Google home.

Whichever control device you choose to

use, they will not only give you complete

control over the light's brightness,

temperature and colour but will

also enable you to program different

combinations of lighting that can be

activated instantly.

16


Whatever platform you choose to make your WiFi enabled lighting

design, it's easy with our plug and play controllers. With these,

most of the lighting in this book can become smart lighting.

1. Choose the lighting you with to

control over WiFi.

“ Alexa...

evening

lighting ”

2. Simply attach the appropriate

controller to the driver.

3. Connect the enabled lighting and

program with a downloadable app.

4. Control, effortelssly, through your

phone, tablet or choice of smart

speaker.

17


18


LED tape & profile

22. White LED tape

24. Changeable white LED tape

26. Colour changeable (RGB) LED tape

28. Dotless & seamless LED tape

30. Flexible linear light LED

31. White side-emitting LED tape

19


LED tape and profile

LED tape is increasingly playing a bigger part in lighting

for kitchens, bathrooms and bedrooms. Its versatility and

durability make it ideal for all kinds of lighting environments;

from high lumen task intensive areas through to low lumen

accent lighting to highlight the rooms architectural features.

With the use of an appropriate profile, tape can be elegantly

mounted or recessed on or into surfaces and with the

use of the right diffuser, the light from the tape can be

altered to achieve a desired effect, or even be hidden

against dark surfaces.

The colour of LED tape

White LED tape, as the name suggests,

provides a consistent bright, dimmable

white light, which is available in range of

temperatures from extra warm through

to cool white.

Coloured LED tape is able to create

millions of colours. By using three

chips (red, green and blue) it works

in a similar way to your television or

computer screen. Each diode can be

controlled independently to create the

perfect colour to match your mood.

Some of our RGB LED tapes have

an extra white diode which makes

switching to white light happen

instantly. This is ideal in rooms that

have multiple uses where switching

between a functional and recreational

environment happens frequently.

Design by Dimension DMI

20


The brightness of LED tape

The brightness of LED tape is most

easily expressed as watts per metre.

The higher number of diodes per metre

the higher the wattage. Chose low watt

per metre tape for low level ambient

or accent lighting and high watt per

metre tape for task lighting and sight

critical environments.

Side emitting LED tape

This LED tape emits light from its edges

rather than from its surface. It creates

light that is parallel to the surface it is

attached to. This is particularly useful for

lighting around curved worktops and for

uplighting curved architectural features.

Dotless and seamless light

The fewer diodes per metre in LED tape

the more likely the individual diodes may

be seen. This becomes an issue if the

tape is reflected in a high gloss surface,

such as a highly polished worktop or

floor. Dotless LED and seamless tapes

have a high wattage and diode count per

metre. When dotless tape is used with an

appropriate profile and diffuser it creates

an almost pure strip of light where the

individual diodes are not visible. Seamless

tape creates the same intense strip of

dotless light but without the need for a

profile and diffuser. This makes it ideal

for curved surfaces.

IP rated LED tape

An IP rating is a measurement of the

protection an item will have against

the ingress of dust, dirt and water.

IP rated LED strips come with a silicone

coating making them waterproof to

varying degrees.

A higher IP rated tape is ideal for

installing in kitchens, wash-up areas,

bathrooms and wet rooms. A lower rated

tape is suitable for tape that might need

cleaning with a damp cloth or where it

might be splashed with water.

Below: the easiest way to choose the

right level of brightness for your tape is by

comparing the relative watts per metre.

A. 2.4w per metre – is well suited for soft

accent lighting such as plinth lighting.

B. 4.8w per metre – stronger area accent

lighting and ambience.

A.

C. 9.6w per metre – an all-round solution

for task lighting especially under-cabinet.

D. 19.2w per metre – for strong task

lighting, architectural lighting and

flooding walls.

B.

C.

D.

21


White LED tape

From bright white task lighting to

accent and mood lighting our white LED

tape is available in different levels of

brightness and colour temperatures. IP

rated tape is also available for bathrooms

and areas that may come into contact

with water.

WHITE 30

Volt: 12 Watt/Metre: 2.4 Max length: 10m

Colour Lumens IP rating CODE

Cool 240 65 FX30-IPWH

Neutral 200 65 FX30-IPNW

Warm 180 65 FX30-IPWW

WHITE 60

Volt: 12 Watt/Metre: 4.8 Max length: 10m

Colour Lumens IP rating CODE

Cool 480 - FXLED-WH

Neutral 420 - FXLED-NW

Warm 360 - FXLED-WW

Cool 480 65 FXLED-IPWH

Neutral 420 65 FXLED-IPNW

Warm 360 65 FXLED-IPWW

WHITE 120

Volt: 12 Watt/Metre: 9.6 Max length: 10m

Colour Lumens IP rating CODE

Cool 960 - FX120-12-CW

Neutral 840 - FX120-12-NW

Warm 720 - FX120-12-WW

Cool 960 65 FX120-12IPCW

Neutral 840 65 FX120-12IPNW

Warm 720 65 FX120-12IPWW

WHITE 240

Volt: 12 Watt/Metre: 19.2 Max length: 3m

Colour Lumens IP rating CODE

Cool 1920 - FX240-12-CW

Neutral 1680 - FX240-12-NW

Warm 1440 - FX240-12-WW

22


23


Changeable white

LED tape

Being able to adjust the temperature

of white LED tape from cool to warm

gives you complete flexibility in creating

lighting palettes and moods for your

room-sets.

DOTLESS WHITE CHANGEABLE

Volt: 24 Watt/Metre: 17.2 Max length: 5m

Colour Lumens CODE

CT 826-847 FX-HDCT-24

WHITE CHANGEABLE

Volt: 24 Watt/Metre: 9.6 Max length: 10m

Colour Lumens IP rating CODE

CT 720/840 * CT120-24

24


25


Colour changeable

(RGB) LED tape

Complete colour control using red, green

and blue diodes. Create imaginative

light palettes for any mood or room. Our

RGB and white tape includes an extra

white diode which makes switching

to white light happen instantly. This is

ideal in rooms that have multiple uses

where switching between functional and

recreational light is required.

COLOUR CHANGEABLE & WHITE TAPE

Volt: 24 Watt/Metre: 18 Max length: 10m

Colour Lumens IP rating CODE

RGB & Cool White 420 - FX4RGBCW

RGB & Warm White 370 - FX4RGBWW

DOTLESS COLOUR CHANGEABLE

Volt: 24 Watt/Metre: 17.2 Max length: 5m

Colour Lumens CODE

RGB 462/625 FX-HDRGB-24

COLOUR CHANGEABLE 30

Volt: 12 Watt/Metre: 7.2 Max length: 10m

Colour Lumens CODE

RGB 480/540 FX30-RGB

26


Design by Dimension DMI

27


Dotless & seamless

LED tape

Our dotless LED tape produces a strong

task lighting and can be dimmed without

creating any dot reflection. When used in

a standard aluminium profile it will give a

clean continuous pure strip of light without

any dots reflecting off the surface.

Our seamless tape produces a dotless

effect without the need for a diffuser and

profile making it ideal for curved planes

and surfaces where profiles can’t be used.

28


DOTLESS COLOUR CHANGEABLE

Volt: 24 Watt/Metre: 17.2 Max length: 5m

Colour Lumens CODE

RGB 462-625 FX-HDRGB-24

DOTLESS WHITE CHANGEABLE

Volt: 24 Watt/Metre: 16.6 Max length: 5m

Colour Lumens CODE

CT 862-847 FX-HDCT-24

SEAMLESS

Volt: 12 Watt/Metre: 6 Max length: 5m

Colour Lumens IP rating CODE

Cool 480 65 FX-LIP-12-CW

Neutral 480 65 FX-LIP-12-NW

Warm 450 65 FX-LIP-12-WW

Extra Warm 438 65 FX-LIP-12-2700

DOTLESS WHITE

Watt/Metre: 7.4/8.6

Max length: 5m

Volt Colour Lumens CODE

12 Cool 820 FXSL-12-CW

Neutral 810 FXSL-12-NW

Warm 770 FXSL-12-WW

Extra Warm 750 FXSL-12-2700

24 Cool 820 FXSL-24-CW

Neutral 810 FXSL-24-NW

Warm 770 FXSL-24-WW

SEAMLESS HIGH POWER

Volt: 12 Watt/Metre: 12 Max length: 5m

Colour Lumens IP rating CODE

Cool 900 65 FX-HIP-12-CW

Neutral 880 65 FX-HIP-12-NW

Warm 840 65 FX-HIP-12-WW

Extra Warm 816 65 FX-HIP-12-2700

29


Flexible linear

light LED

Flexible linear is entirely encapsulated

with silicone which acts as its own

diffuser. This creates lots of advantages

and is particularly helpful when using on

curved planes and surfaces. It can also

be recessed into surfaces to give a flush

finish. Being IP rated makes these tapes

versatile solutions for any room.

NEON RECESSED

Volt: 12 Watt/Metre: 11 Max length: 5m

Colour Lumens IP rating CODE

Neutral 1050 66 NF-12R-NW

Warm 1000 66 NF-12R-WW

STELLAR

Volt: 12 Watt/Metre: 10 Max length: 3m kit

Colour Lumens IP rating CODE

Neutral 67 STLR12-3-NW

Warm 67 STLR12-3-WW

30


White

side‐emitting

LED tape

With specially configured diodes that shine

down rather than out this makes it perfect

for fitting vertically onto surfaces to create

dramatic thin blades of light or for use in

curved planes, plinths and shelving.

WHITE 60

Volt: 12 Watt/Metre: 4.8 Max length: 10m

Colour Lumens IP rating CODE

Cool 240 - SELEDR-CW

Neutral 200 - SELEDR-NW

Warm 190 - SELEDR-WW

Cool 240 65 SELEDR-IPCW

Neutral 200 65 SELEDR-IPNW

Warm 190 65 SELEDR-IPWW

31


32


LED tape profile

36. Surface profile

38. Recessed profile

40. Specialised profiles

Design by Treyone

33


Types of LED tape profile

and their use

Recessed

These profiles can be integrated

into many different materials and

provide discreet housing for LED tape.

Particularly useful for minimalist

designs or where, for practical

reasons, the tape needs to sit

flush with the surface.

Surface

In some areas where the profile will

be less visible, for example, behind

a pelmet or over a cabinet, there is a

practical advantage in fixing the profile

and housed tape to the surface.

Specialist

Tape can even be housed in profiles

specifically designed for other functions.

These include hanging rail profiles and

profiles that can bend to match curves or

plastered into walls or ceilings.

Plaster In

Combining this profile and dotless

tape creates a stunning clean

light in newly plastered walls.

34


Black effect

Our black diffuser can be used with our

recessed or surface mounted profile.

When the tape is off, the effect is a

discreet lighting solution that is perfect

for dark colours and furniture.

Board

A specialist profile that slides onto the

back of shelving and houses LED tape

creates an invisible source of light which

floods the back of the shelving unit.

35


Surface profile

Our surface profiles are available in a

range of shapes, and finishes and can be

cut bespoke for your projects.

Design by Treyone

36


BENDABLE

Max length: 2m

Size Finish Diffuser CODE

18 x 5.66 Aluminium Opal SB

ANGLED

Max length: 2m

Size Finish Diffuser CODE

30 x 11 Aluminium Clear LAS

CORNER

Max length: 2.5m

Size Finish Diffuser CODE

18 x 18 Aluminium Clear JCC

Frosted

JCF

RECTANGLE

Max length: 2.5m

Size Finish Diffuser CODE

17.5 x 8 Aluminium Frosted JS

Black Frosted JSBK

White Frosted JSWH

Black Black JSBK-BK

RECTANGLE

Max length: 2.5m

Size Finish Diffuser CODE

11.6 x 15 Aluminium Opal JMW

SIDE EMITTING

Max length: 2m

Size Finish Diffuser CODE

20 x 5 Synthetic • WESP

GLASS PROFILE

Max length: 2m

Size Finish Diffuser CODE

25 x 14 Grey • WGL

QUADRANT

Max length: 2.5m

Size Finish Diffuser CODE

16 x 16 Aluminium Opal JQ

37


Recessed profile

Elegant and discreet, recessed profile sits

flush against the surface and houses

the LED tape out of sight. Particularly

useful in minimalist designs where

clear lines and uninterrupted planes are

important. We can provide a bespoke

cutting service for your projects, just let

us know what you need.

RECTANGLE

Max length: 2.5m

Size Finish Diffuser CODE

24.8 x 7 Aluminium Frosted JR

Black Frosted JRBK

White Frosted JRWH

Black Black JRBK-BK

RECTANGLE-DEEP

Max length: 2.5m

Size Finish Diffuser CODE

25 x 15 Aluminium Opal JSR

SQUARE

Max length: 2.5m

Size Finish Diffuser CODE

10 x 10 Aluminium Frosted J10SQ

PLASTER IN

Max length: 2m

Size Finish Diffuser CODE

14.5 x 15 Aluminium Opal TNW

SIDE EMITTING

Max length: 2m

Size Finish Diffuser CODE

6 x 30.5 Aluminium Integrated SSEM†

SLIMLINE

Max length: 2m

Size Finish Diffuser CODE

15.5 x 11 Aluminium Frosted UNR

† Supplied with 24 volt 8 watt side emitting tape

38


RECESSED

Max length: 2m

Size Finish Diffuser CODE

24 x 9 Black Frosted SCAS-BK

Aluminium Frosted SCAS

RECTANGLE

Max length: 2m

Size Finish Diffuser CODE

15.5 x 10.7 Polycarbonate • WFL

Design by Treyone

39


Specialist profiles

A range of specialist profiles that extend

the functionality of lighting. From hanging

rails to profiles specially designed for

shelf units all available with our bespoke

cutting service.

BRACKET

Finish Diffuser CODE

Aluminium • HR-ENDSET

RAIL

Max length: 2m

Size Finish Diffuser CODE

15 x 30 Aluminium • WHR

SENSOR BRACKET

Max length: 78mm

Size Finish Diffuser CODE

31 x 38 Aluminium • HR-PIR-ENDSET

40


Design by Schuller

Board profile

Get stunning effects using this specialist profile that slides over the back edge of

shelves and contains and diffuses LED tape. The result is a wash of light from the

rear of the shelving unit emanating from what app ears to be an invisible source.

WALL/TILE

Size Finish Diffuser CODE

35 x 45 Aluminium Frosted JCH

BOARD

Max length: 2.5m

Size Finish Diffuser CODE

21 x 24 Aluminium Opal JB18

IP

Max length: 2.5m

Size Finish Diffuser IP rating CODE

16 x 12.6 Aluminium Frosted 65 JIP65

41


42


Cabinet lighting

44. COB LED lighting

47. Driverless LED lighting

48. LED lighting

50. Changeable white LED lighting

52 Motion sensor LED lighting

54 Strip lighting

55 Linkable modular linear system

57 Plinth lighting

43


COB LED lighting

Chip on board LED cabinet lighting

provides a bright, uniform light that is

perfect for task lighting. Being dotless

it creates a beautiful light effect on

wall surfaces.

ROUND RECESSED

Volt: 12 Watt: 3 Size: 9 x 62

Finish Temperature Lumens CODE

Aluminium-Matt Cool 280 DLC-ALU-CW

Warm 260 DLC-ALU-WW

Stainless Steel Cool 280 DLC-SS-CW

Neutral 270 DLC-SS-NW

Warm 260 DLC-SS-WW

Anthracite Cool 280 DLC-AN-CW

Neutral 270 DLC-AN-NW

Warm 260 DLC-AN-WW

ROUND SURFACE

Volt: 12 Watt: 3 Size: 12.5 x 62

Finish Temperature Lumens CODE

Aluminium-Matt Cool 280 DLC-SM-ALU-CW

Warm 260 DLC-SM-ALU-WW

Stainless Steel Cool 280 DLC-SM-SS-CW

Neutral 270 DLC-SM-SS-NW

Warm 260 DLC-SM-SS-WW

Anthracite Cool 280 DLC-SM-AN-CW

Neutral 270 DLC-SM-AN-NW

Warm 260 DLC-SM-AN-WW

TRIANGLE

Volt: 12 Watt: 3 Size: 143 x 128 x 40

Finish Temperature Lumens CODE

Stainless Steel Cool 280 TRC-SS-CW

Neutral 270 TRC-SS-NW

Warm 260 TRC-SS-WW

44


Design by Schuller

45


Design by Now Kitchens

RECTANGLE TARGA

Volt: 12 Watt: 3 Size: 190 x 60 x 5

Finish Temperature Lumens CODE

Aluminium-Matt Cool 280 TARGA-CW

Neutral 270 TARGA-NW

Warm 260 TARGA-WW

Anthracite Cool 280 TARGA-AN-CW

Neutral 270 TARGA-AN-NW

Warm 260 TARGA-AN-WW

SQUARE TARGA

Volt: 12 Watt: 3 Size: 60 x 60 x 5

Finish Temperature Lumens CODE

Aluminium-Matt Cool 280 SQ-TARGA-CW

Neutral 270 SQ-TARGA-NW

Warm 260 SQ-TARGA-WW

46


Driverless LED

lighting

Drivers are not required for these mains

voltage non dimmable LED cabinet lights.

TRIANGLE (DRIVERLESS)

Volt: 240 Watt: 2.5 Size: 143 x 129 x 40

Finish Temperature Lumens CODE

Stainless Steel Cool 210 TRM-SS-3K

Neutral 200 TRM-SS-4K

Warm 190 TRM-SS-6K

ROUND SURFACE (DRIVERLESS)

Volt: 240 Watt: 2.5 Size: 17 x 72

Finish Temperature Lumens CODE

Stainless Steel Cool 210 DLMSM-SS-6K

Neutral 200 DLMSM-SS-4K

Warm 190 DLMSM-SS-3K

47


LED lighting

Our LED lighting is available in a wide

range of imaginative fittings to suit every

design. Some fittings are diffused to

avoid dotting.

48


LED - FLAT

Volt: 12 Watt: 1.4 Size: 6 x 58

Finish Colour Lumens CODE

Satin Silver Cool 90 LEDF-SC-WH

Warm 75 LEDF-SC-WW

LED - ROUND (RECESSED)

Volt: 12 Watt: 2 Size: 10 x 65

Finish Colour Lumens CODE

Stainless Steel Cool 160 DLK-SS-CW

Neutral 155 DLK-SS-NW

Warm 150 DLK-SS-WW

LED - ROUND (SURFACE)

Volt: 12 Watt: 2 Size: 14 x 68

Finish Colour Lumens CODE

Stainless Steel Cool 160 DLKSM-SS-CW

Neutral 155 DLKSM-SS-NW

Warm 150 DLKSM-SS-WW

ROUND MINI ‡

Volt: 12 Watt: 0.4 IP rating: 64 Size: 10 x 30

Finish Temperature Lumens CODE

Chrome Cool 40 ELLA-6K

Neutral 35 ELLA-4K

Warm 30 ELLA-3K

LED - TRIANGLE

Volt:12 Watt: 2 Size: 130 x 153 x 47

Finish Colour Lumens CODE

Stainless Steel Cool 160 TRK-SS-CW

Neutral 155 TRK-SS-NW

Warm 150 TRK-SS-WW

LED - SQUARE

Volt: 12 Watt: 1.25 Size: 65 x 65 x 8

Finish Colour Lumens CODE

Stainless Steel Cool 100 SQ12-LED-CW-SS

Warm 90 SQ12-LED-WW-SS

can be recessed

LED - MAGRA

Volt: 12 Watt: 5 Size: 160 x 60 x 5.5mm

Finish Colour Lumens CODE

Aluminium Cool 200 MAGRA-CW

Neutral 190 MAGRA-NW

Warm 180 MAGRA-WW

LED - KWADRA

Volt: 12 Watt: 2.5 Size: 150 x 35 x 9

Finish Colour Lumens CODE

Satin Silver Cool 210 KWADRA-CW

Neutral 200 KWADRA-NW

Warm 190 KWADRA-WW

LED - TABULA

Volt: 12 Watt: 3 Size: 160 x 80 x 8

Finish Colour Lumens CODE

Satin Silver Cool 220 TABULA-CW

Neutral 210 TABULA-NW

Warm 200 TABULA-WW

49


Changeable white

LED lighting

These LED units enable you to switch

between cool bright task orientated

lighting to warm end of the day ambience

easily, either through smart WiFi enabled

devices or through remote controls.

ROUND RECESSED

Volt: 12 Watt: 2 Size: 350 x 95

Colour Finish Lumens CODE

CCT Stainless Steel 150-160 DLK-SS-CCT

AURA

Volt: 12 Watt: 2.4 Size: 190 x 50 x 5

Colour Finish Lumens CODE

CCT Aluminium 140/150 AURA

AURA ROUND

Volt: 12 Watt: 2.4 Size: 5 x 55

Colour Finish Lumens CODE

CCT Aluminium 140/150 AURA-DL

50


How to be smart

Install our LED lighting, connect them to our Omni receiver and you will be able

to instantly control where applicable, the brightness, the colour temperature or

colour through a remote controller or through your WiFi enabled smart devices

such as Amazon's Alexa or Google Home.

Find out how this works on page 16.

51


Motion sensor

LED lighting

Often referred to as convenience lighting

these LED units are automatically activated

via built in passive infrared sensors.

Especially designed for in cabinet use,

these are easy to install and are integral to

a well thought out room design.

ROMA-BATTERY

Volt: Lithium ION Watt: 0.5 Size: 78 x 78 x 13

Colour Finish Lumens CODE

Cool Satin Silver 57 ROMA-SQT

NAPOLI2-BATTERY

Volt: Lithium ION Watt: 1 Size: 21 x 70

Colour Finish Lumens CODE

Warm Satin Silver 110 NAPOLI2

ROUND SURFACE CLP

Volt: 12 Watt: 2.9 Size: 68 x 7

Colour Finish Lumens CODE

Warm Satin Silver 100 CLP-SAT-WW

DOUBLE DOOR SENSOR

Volt: 12 Watt: 5.4 Size: 562 x 30 x 15

Colour Finish Lumens CODE

Warm Satin Silver 400 CSL-SAT-3K

DRAWER LIGHT

Volt: 12 Colour: Neutral Finish: Satin Silver

Size Watt Lumens CODE

462 x 29 x 10 4.2 310 SDL-462N

562 x 29 x 10 5.4 410 SDL-562N

762 x 29 x 10 7.8 590 SDL-762N

862 x 29 x 10 9 680 SDL-862N

962 x 29 x 10 10.2 770 SDL-962N

52


Design by Schuller

53


Strip lighting

Classic task lighting for cabinets.

Available in various lengths that can

be fitted together to create a modular

lighting system.

STRIP LIGHT

Volt: 240

Finish: White

Size Watt Lumens CODE

224 x 23 x 35 3 270 UCLED2-224-6K

3 255 UCLED2-224-4K

3 245 UCLED2-224-3K

303 x 23 x 35 5 460 UCLED2-303-6K

5 440 UCLED2-303-4K

5 410 UCLED2-303-3K

526 x 23 x 35 8 720 UCLED2-526-6K

8 700 UCLED2-526-4K

8 680 UCLED2-526-3K

903 x 23 x 35 14 1260 UCLED2-903-6K

14 1200 UCLED2-903-4K

14 1130 UCLED2-903-3K

1159 x 23 x 35 16 1460 UCLED2-1159-6K

16 1400 UCLED2-1159-4K

16 1320 UCLED2-1159-3K

54


Linkable modular

linear system

The LSP is a modular system of strip

lighting that emits a clean linear dotless

light and no dark spots even into

the corners. It can be easily fitted via

supplied brackets or magnets.

LSP LINKABLE DOTLESS STRIP

Volt: 24

Finish: White

Temperature Size Watt CODE

Neutral 100 1.33 LSP-100-NW

Warm 100 1.33 LSP-100-WW

Neutral 300 4 LSP-300-NW

Warm 300 4 LSP-300-WW

Neutral 580 7.99 LSP-580-NW

Warm 580 7.99 LSP-580-WW

LSP LINKABLE DOTLESS CORNERS

Volt: 24

Finish: White

Temperature Direction CODE

Neutral Anti Clockwise LSP-CACW-NW

Warm Anti Clockwise LSP-CACW-WW

Neutral Clockwise LSP-CCW-NW

Warm Clockwise LSP-CCW-WW

LSP LINKABLE DOTLESS LEADS

Volt: 24

Finish: White

Type Size CODE

Input 2M LSP-INPUT

Link 150mm LSP-LINK150

55


56

Design by Treyone


Plinth lighting

Plinth lighting creates very dramatic

accent lighting which accentuates the

shape of the room and is especially

effective around islands. To do this use

either small individual LED lights as shown

below or led tape as shown opposite.

SPOT

Volt: 240 Finish: Brushed Chrome Size: 35 Ø x 1

Colour Watt CODE

Cool 0.5 LED-PLRND1WH

Cool 4 light kit x 0.5 LED-PLRNDWH

QUAD

Volt: 12/240 Finish: Satin Silver Size: 38 x 38 x 6

Colour Watt CODE

Cool 4 x 0.5 LED-PLSQ4WH

Cool 2 LED-PLSQ1WH

MICRO-DISC

Volt: 12/240 Finish: Stainless Steel Size: 14 Ø x 1

Colour Watt CODE

Cool 0.2 LED-PL2-WH

Warm 0.8 LED-PL2-KIT4-WH

Cool 0.2 LED-PL2-WW

Warm 0.8 LED-PL2-KIT4-WW

SQUARE

Volt: 12/240 Finish: Stainless Steel Size: 35 x 35 x 1

Colour Watt CODE

Cool 0.6 SQWHLED1SS

Cool 2.4 SQWHLED4SS

Warm 0.6 SQWWLED1SS

Warm 2.4 SQWWLED4SS

57


58


Ceiling lighting

59


Ceiling downlights

Powerful downlights with integrated

LEDs, these products are fire rated and

dimmable. Perfect for directing light

on areas that require good levels of

illumination or to highlight design features.

FIXED (8-WATT)

Volt: 240 Watt: 8 IP rating: 65 Size: 56 x 69 Ø

Finish Colour Lumens CODE

White Neutral 530 ELAN8-4K-WH

Warm 500 ELAN8-3K-WH

Chrome Neutral 530 ELAN8-4K-CH

Warm 500 ELAN8-3K-CH

Brushed Nickel Neutral 530 ELAN8-4K-BN

Warm 500 ELAN8-3K-BN

FIXED (10-WATT)

Volt: 240 Watt: 10 IP rating: 65 Size: 57 x 69 Ø

Finish Colour Lumens CODE

White Neutral 580 ELAN10-4K-WH

Warm 560 ELAN10-3K-WH

Chrome Neutral 580 ELAN10-4K-CH

Warm 560 ELAN10-3K-CH

Brushed Nickel Neutral 580 ELAN10-4K-BN

Warm 560 ELAN10-3K-BN

60


61


Get the look you need

Most of our ceiling lighting has

interchangeable bezels or rings.

This gives you great flexibility in

finish and even shape.

TILT (8-WATT)

Volt: 240 Watt: 8 IP rating: 20 Size: 56 x 82 Ø

Finish Colour Lumens CODE

White Neutral 530 ELAN8T-4K-WH

Warm 500 ELAN8T-3K-WH

Chrome Neutral 530 ELAN8T-4K-CH

Warm 500 ELAN8T-3K-CH

Brushed Nickel Neutral 530 ELAN8T-4K-BN

Warm 500 ELAN8T-3K-BN

TILT (10-WATT)

Volt: 240 Watt: 10 IP rating: 20 Size: 57 x 79 Ø

Finish Colour Lumens CODE

White Neutral 580 ELAN10T-4K-WH

Warm 560 ELAN10T-3K-WH

Chrome Neutral 580 ELAN10T-4K-CH

Warm 560 ELAN10T-3K-CH

Brushed Nickel Neutral 580 ELAN10T-4K-BN

Warm 560 ELAN10T-3K-BN

BAFFLED (10-WATT)

Volt: 240 Watt: 10 IP rating: 44 Size: 76 x 71 Ø

Finish Colour Lumens CODE

White Neutral 530 ELAN10-BF-4K-WH

Warm 510 ELAN10-BF-3K-WH

Brushed Nickel Neutral 530 ELAN10-BF-4K-BN

Warm 510 ELAN10-BF-3K-BN

62


CHANGEABLE WHITE

Volt: 240 Watt: 7 IP rating: 65 Size: 85 x 64

Finish Colour Lumens CODE

White/Brushed 2700-6500 650-750 QUARTZ-4CT

Nickel

SMART CONTROL - WIZ

Volt: 240 Watt: 10 IP rating: 65 Size: 85 x 64

Colour Lumens CODE

2700-6500 650-750 ESPRIT-WIZ

Bezel

White

ESPRIT-WIZ -WH

Chrome

ESPRIT-WIZ -CH

Brushed Nickel

ESPRIT-WIZ -BN

Easy colour

temperature change

You can change the colour

temperature of both of these

downlights. The Changeable White

uses a switch on the back of the

device and the Smart Control

downlight uses the Wiz platform

to wirelessly connect to it. This

means you can change the colour

temperature over WiFi through an

app or smart speaker system, no

matter if it is one solitary downlight

or a whole ceiling of lights.

63


64


Pendant lighting

66. Contemporary pendants

70. Statement pendants

71. Glass pendants

72. Vintage pendants

74. Lamps for pendants

65


Contemporary pendants

a) b) c)

a) Turin

Code: TURIN-BS

Black sandstone cement effect

Includes: 6W LED

Width/Diameter: 4cm

Drop: 170cm

b) Como

Code: COMO-BS

Black sandstone cement effect

Requires: E27 max 25W

Width/Diameter: 16cm

Drop: 190cm

c) Como

Code: COMO-WS

White sandstone cement effect

Requires: E27 max 25W

Width/Diameter: 16cm

Drop: 190cm

66


e)

d)

f) g)

d) Jimmy

Code: PL1R301210026

Black metal body, gold inner

Requires: E27 max 60W

Width/Diameter: 31cm

Drop: 130cm

e) Jimmy

Code: PL1R301210876

Grey metal body, silver inner

Requires: E27 max 60W

Width/Diameter: 31cm

Drop: 130cm

f) Marley

Code: PL13124001016

White single pendant

Requires: GU10 max 35W

Width/Diameter: 6cm

Drop: 150cm

g) Marley

Code: PL13124001326

Matt black single pendant

Requires: GU10 max 35W

Width/Diameter: 6cm

Drop: 150cm

67


Contemporary pendants

i)

j)

h)

h) Baroness

Code: PL13089002316

Matt white metal and acrylic

Requires: E14 max 15W x 2 req

Width/Diameter: 25cm

Drop: 150cm

i) Baroness

Code: PL13089002426

Anthracite metal and acrylic

Requires: E14 max 15W x 2 req

Width/Diameter: 25cm

Drop: 150cm

j) Kingston

Code: PL13153901066

Glass and chrome

Requires: E14 max 40W

Width/Diameter: 20cm

Drop: 150cm

68


k) Midas

Code: PL13016001066

Smoked glass and chrome

Requires: E27 max 60W

Width/Diameter: 30cm

Drop: 150cm

l) Midas

Code: PL13016901066

Smoked glass and chrome

Requires: E27 max 60W

Width/Diameter: 45cm

Drop: 150cm

l)

k)

m)

m) Pure

Code: PL13020003426

Anthracite metal

and smoked glass

Requires: E14 max 28W x 2 req

Width/Diameter: 40cm

Drop: 150cm

69


Statement pendants

a)

b)

a) Course

Code: PL1R320511076

Brushed nickel and acrylic

Requires: 27W LED included

Width/Diameter: 60cm

Drop: 150cm

b) Carrera

Code: PL13250101326

Matt black metal

Requires: 38W LED

Width/Diameter: 55cm

Drop: 150cm

70


Glass pendants

A range of stunning glass designs

perfect for the contemporary home

a)

c)

b)

d)

a) Prague

Antique bronze finish hanging

set with twisted black cord

Requires: E27 max 60w

Drop: 200cm

Budapest (not shown)

As Prague with Pewter finish

b) Calais

Code: PL13048001426

Smoked glass body

Requires: E27 max 60W

Width/Diameter: 20cm

Drop: 130cm

c) Dover

Code: PL13049001426

Smoked glass body

Requires: E27 max 60W

Width/Diameter: 40cm

Drop: 130cm

d) Robin (4 light)

Code: PL13106004326

Matt black metal with smoked glass. 4 light

Requires: E27 max 28W x4 req

Width/Diameter: 80cm

Drop: 150cm

Robin (1 light)

Code: PL13106001326

Matt black metal with smoked glass. 1 light

Requires: E27 max 28W req

Width/Diameter: 10cm

Drop: 150cm

71


Vintage pendants

b)

c)

a)

a) Cord

Code: PL13101005616

Antique grey five cord set

Requires: E27 max 60W x 5

Width/Diameter: 180cm

Drop: 150cm

Cord (not shown)

Code: PL13101005626

Antique copper five cord set

Requires: E27 max 60W x 5

Width/Diameter: 180cm

Drop: 150cm

b) Cord

Code: PL13101001616

Antique grey single pendant

Requires: E27 max 60W x 1

Width/Diameter: 12cm

Drop: 150cm

c) Cord

Code: PL13101001626

Antique copper single pendant

Requires: E27 max 60W x 1

Width/Diameter: 31cm

Drop: 150cm

72


Inspirational heritage designs

with a contemporary twist

d)

e)

d) Gotham

Code: PL13070006886

Vintage gunmetal effect

Requires: E27 max 60W x 6

Width/Length: 46.3cm x 103cm

Drop: 150cm

e) Tanja

Code: PL13007001026

Black and copper

Requires: E27 max 60W

Width/Diameter: 39cm

Drop: 150cm

73


Lamps for pendants

a) b) c)

i)

d)

e) f)

g)

h)

i)

j)

k)

l) m)

74


Don’t forget your bulbs, here’s a range of

LED lamps suitable for the pendant collection

a) Code: VIN-G95-ES-D

Dimmable vintage globe G95

LED filament lamp

Wattage: 2

Lumens: 170

Cap type: ES

d) Code: PL19024796

Bronze vintage LED diamond

shape

Wattage: 4

Lumens: 320

Cap type: E27

h) Code: PL19014796

Bronze vintage LED arrow

shape

Wattage: 4

Lumens: 320

Cap type: E27

k) Code: PL19876606

Dimmable GLS-LED -

Warm white

Wattage: 6

Lumens: 600

Cap type: E27

b) Code: VIN-ST64-ES-D

Dimmable vintage ST64 LED

filament lamp

Wattage: 2

Lumens: 170

Cap type: ES

e) Code: PL19024546

Silver vintage LED diamond

shape

Wattage: 4

Lumens: 140

Cap type: E27

i) Code: PL19014546

Silver vintage LED arrow

shape

Wattage: 4

Lumens: 140

Cap type: E27

l) Code: PL19894006

Candle LED - Warm white

Wattage: 4

Lumens: 400

Cap type: E14

c) Code: VIN-T45-ES-D

Dimmable vintage tubular T45

LED filament lamp

Wattage: 2

Lumens: 170

Cap type: ES

f) Code: PL19044796

Bronze vintage LED faceted

shape

Wattage: 4

Lumens: 320

Cap type: E27

j) Code: PL1988564

Silver LED G95 shape

Wattage: 4

Lumens: 140

Cap type: E27

m) Code: GLS10-WW-ES

Warm white

Code: GLS10-D-WW-ES

Dimmable lamp

Wattage: 10

Lumens: 806

Cap type: ES

g) Code: PL19044546

Silver vintage LED faceted

shape

Wattage: 4

Lumens: 140

Cap type: E27

75


76


Bathroom lighting

78. Bathroom cabinet lighting

80. Ceiling floor and wall lighting

77


Bathroom

cabinet lighting

CORAL

Volt: 12 Watt: 3 Size: 160 x 40 x 5

Finish Temperature Lumens IP rating CODE

Chrome Warm 300 44 CORAL

NARA

Volt: 12 Finish: Stainless Steel Size: 8.5 x 50 Ø

Temperature Watt Lumens IP rating CODE

Neutral 1 170 67 NARAFL-4K

Warm 1 160 67 NARAFL-3K

78


Ingress Protection (IP Rating)

It is important to ensure that all bathroom lighting is well

protected from water, either directly or in the atmosphere.

The IP rating scheme is a standard that rates a light's

suitability for use in wet conditions. The specific rating

depends on the proximity to water sources. All of our

bathroom lighting has a minimum rating of IP44 with

some downlights rated IP65, ideal for use in showers.

79


Ceiling floor and

wall lighting

80


KITTS

Volt: 240 IP rating: 44 Finish: Chrome

Size Kelvin Lumens Watt CODE

90 x 85 Ø 3000 280 3.6 282710106

160 x 85 Ø 3000 2 x 180 2 x 2.8 282710206

BUBBLES - SINGLE

Volt: 240 Watt: 1 x 3.2 Size: 190 x 120 x 70 Ø

Finish Kelvin Lumens IP rating CODE

Chrome 3000 300 44 282410106

BUBBLES - DOUBLE

Volt: 240 Watt: 2 x 3.2 Size: 300 x 120 x 70 Ø

Finish Kelvin Lumens IP rating CODE

Chrome 3000 2 x 300 44 282410206

CESAR

Volt: 240 Watt: 15 IR rating: 44

Size Kelvin Lumens CODE

260 x 30 3000 1350 656411506

APART

Volt: 240 Watt: 18 IR rating: 44

Size Kelvin Lumens CODE

350 x 100 3000 1600 659411806

MATTIMO

Volt: 240 Watt: 4.3 IR rating: 44

Size Kelvin Lumens CODE

400 x 55 x 85 3000 450 283270106

JENA

Volt: 12 Finish: Stainless Steel Size: 30 x 30 Ø

Temperature Watt Lumens IP rating CODE

3000K 0.6 40 67 GR-JENA

4000K 0.6 50 67 GR-JENA-4K

ELISE2

Volt: 12 Finish: Stainless Steel Size: 20 x 20 Ø

Kelvin Watt Lumens IP rating CODE

3000 0.5 35 68 GR-ELISE2

81


82


Other lighting

& accessories

85. Other lighting

86. Powerports and chargers

83


84


Other lighting

MAJOR SHELF

Volt: 240

Finish: Aluminium

Size Temperature Watt CODE

450 x 205 x 50 Cool 5.8 LSHELF45-LED

600 x 205 x 50 Cool 8 LSHELF60-LED

900 x 205 x 50 Cool 12 LSHELF90-LED

LED SLIM SHELF

Volt: 240

Finish: Aluminium

Size Temperature Watt CODE

450 x 230 x 44 Warm 9.7 LEDSLIM450-3K

Neutral 9.7 LEDSLIM450-4K

600 x 230 x 44 Warm 13.1 LEDSLIM600-3K

Neutral 13.1 LEDSLIM600-4K

900 x 230 x 44 Warm 19.5 LEDSLIM900-3K

Neutral 19.5 LEDSLIM900-4K

SHINE - GLASS SHELF LIGHT

Volt: 12

Finish: Aluminium

Size Temperature Watt CODE

35 x 38 x 30 Cool 1.5 SHINE-CW

Warm 1.5 SHINE-WW

TOUCH BEDHEAD WITH USB CHARGER

Volt: 12 Watt: 10

Finish Temperature CODE

Black Warm HARDY-BK

Chrome Warm HARDY-CH

MIA- RECESSED WALL/STAIR LIGHT

Volt: 240 Size: 75 x 75 x 48

Finish Temperature Watt CODE

Brushed Nickel Neutral 4 MIA-BN-4K

Warm 4 MIA-BN-3K

Chrome Neutral 4 MIA-CH-4K

Warm 4 MIA-CH-3K

85


Powerports and

chargers

POWERPORT

Volt: 240 Max Watt: 3250

Size Finish CODE

352 x 115 Black POW-2B

Satin Silver

POW-2S

Stainless Steel

POW-3SS

410 x 115 Stainless Steel POW-3SS-BT

MOTORISED POWERPORT QI CHARGER

Volt: 240 Watt: 3250

Size Finish CODE

720 x 112 Stainless Steel POW-6M

MOTORISED POWERPORT

Volt: 240 Watt: 3250

Size Finish CODE

720 x 112 Stainless Steel POW-5M

SURFACE USB CHARGER

Volt: 12 Max Watt: 5

Size Finish CODE

50 x 30 x 14 Grey WUSB-S

RECESSED USB CHARGER

Volt: 12 Max Watt: 5

Size Finish CODE

37 x 25 Grey WUSB-R

86


87


88

Design by Schuller


Sensors, drivers

& controllers

89


PIR

ON/OFF

Sensors

DOOR SENSORS IR

Volt: 12/24

Size Finish Max Watt CODE

63 x 14 White 15/30 IRDS-LED-TOP

Black 15/30 IRDSBK-LED

SENSORS- RECESSED/SURFACE

Volt: 12/24

Size Finish Max Watt CODE

63 x 16 Satin Silver 24/48 S-IRDS-LED-TOP

63 x 16 Satin Silver 24/48 S-PIR-LED-TOP

DOOR SENSOR (SINGLE)

Volt: 12/24

Size Finish Max Watt CODE

23 x 18 x 8 Satin Silver 24/48 DSIR-TOP

DOOR SENSOR (TWIN)

Volt: 12/24

Size Finish Max Watt CODE

23 x 18 x 8 Satin Silver 24/48 DSIR-DUO-TOP

MINI DOOR SENSOR (SINGLE) RECESSED

Volt: 240

Size Finish Max Watt CODE

13 x 10 Black 250 S-MINI-DS

MINI DOOR SENSOR (TWIN) RECESSED

Volt: 240

Size Finish Max Watt CODE

13 x 10 Black 250 S-MINI-DS-DUO

MOTION SENSORS RECESSED

Volt: 240

Size Finish Max Watt CODE

13 x 10 Black 250 S-MINI-MS

WIRELESS PIR SENSOR KIT

Volt: 12/24

Size Finish Max Watt CODE

51 x 51 x 10 Black 60/120 PIR-RFSEN

90


Drivers

6W DRIVER

Max Watt: 6

Finish: White

Size Volt CODE

68 x 35 x 20 12 DRV12-6W

24 DRV24-6W

12W DRIVER

Max Watt: 12

Finish: White

Size Volt CODE

94 x 45 x 27 12 DRV12-12W

15W DRIVER

Max Watt: 15

Finish: White

Size Volt CODE

121 x 46 x 20 12 DRV12-15W

30W DRIVER

Max Watt: 30

Finish: White

Size Volt CODE

140 x 45 x 29 12 DRV12-30W

24 DRV24-30W

60W DRIVER

Max Watt: 60

Finish: White

Size Volt CODE

180 x 60 x 32 12 DRV12-60W

24 DRV24-60W

10W DIMMABLE DRIVER

Max Watt:10

Finish: White

Size Volt CODE

158 x 46 x 18 12 DRV12D-10W

30W DIMMABLE DRIVER

Max Watt: 30

Finish: White

Size Volt CODE

158 x 46 x 18 12 DRV12D-30W

50W DIMMABLE DRIVER

Max Watt: 50

Finish: White

Size Volt CODE

174 x 61 x 24 12 DRV12D-50W

91


Dimmers

& controllers

SINGLE COLOUR FOUR ZONE

Max Watt: 144/288

Volt

CODE

12/24 RF-Z1C-REM

12/24 RF-Z1C-REC

RGB/RGBW FOUR ZONE

Max Watt: 144/288

Volt

CODE

12/24 RF-Z4C-REC

12/24 RF-Z4C-REM

WHITE CHANGEABLE 4 ZONE

Max Watt: 144/288

Volt

CODE

Receiver 12/24 RF-Z2C-REC

Remote

RF-Z1C-REM

RECESSED ON/OFF DIMMER

Volt: 12/24 Max Watt: 24/48

Size Finish CODE

22 x 18 Satin Silver RECTD

RECESSED OR SURFACE ON/OFF DIMMER

Volt: 12/24 Max Watt: 24/48

Size Finish CODE

17 Satin Silver SRSEN

LLSENS IR ON/OFF GESTURE CONTROL

PIR-SENTIM

Volt Max Watt CODE

240 250 LLSENS

Volt Max Watt CODE

240 250 PIRSENTIM

92


Smart Control

WIZ RETRO

Max Watt: 500 Volt: 240

CODE

Receiver

WIZ-REC

OMNI

Max Watt: 144/288

Volt

CODE

Smart controller 12 OMNI-REC-TOP-PS

93


Terms and conditions

Leyton Lighting has a policy of continuous product development and whilst

every effort has been made to provide accurate and up-to-date information

within this brochure, products supplied may vary in detail to those illustrated

and described.

LED – please note that colour shift may occur where LEDs are placed within

close proximity to each other and that colour temperature can vary between

batches and manufacturers.

We would like to thank Schuller, Treyone, JS Geddes, Now Kitchens and

Dimension DMI for the use of their photography in the making of this brochure.

94


95


UNIT 5, Hemmells Park, Hemmells, Laindon, Essex, SS15 6GF

T: +44 (0)1268 544488

F: +44 (0)1268 544448

E: info leytonkbb.co.uk

W: leytonkbb.co.uk

96

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!