ABS / AIR BAG 2004 USER GUIDE - OTC
ABS / AIR BAG 2004 USER GUIDE - OTC
ABS / AIR BAG 2004 USER GUIDE - OTC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ABS</strong> / Air Bag <strong>2004</strong> User Guide Chapter 5: Diagnostic Codes (Read / Clear Codes)<br />
Review Codes<br />
Review Codes<br />
For some vehicles, the Review Codes option appears<br />
on the Diagnostic Trouble Codes menu screen. This<br />
option lets you review trouble codes after initially reading<br />
them.<br />
To review diagnostic trouble codes, follow these steps:<br />
Figure 5.12: Diagnostic Menu Screen<br />
1 Select Diagnostic Codes from the Diagnostic Menu<br />
screen. This displays the Diagnostic Trouble Codes menu<br />
screen.<br />
Figure 5.13: Diagnostic Trouble Codes Menu Screen<br />
2 From the Diagnostic Trouble Codes screen, select<br />
Review Codes and press the ENTER key.<br />
3 If another menu appears, select KOEO on Demand and<br />
press the ENTER key. This displays the list of codes on<br />
the Review Codes screen.<br />
Note: If there are no codes to display, a message screen<br />
states that the code library is empty. If necessary, read<br />
the codes. Refer to “Read Codes” on page 34.<br />
Figure 5.14: Review Codes Screen<br />
4 View the list and save or print it, if necessary.<br />
To view a saved file, refer to “Playback a Data File” on<br />
page 21. For printing information, refer to “Print” on<br />
page 26.<br />
5 Use the EXIT key to return to previous screens.<br />
Note: After reviewing the codes, if necessary, clear the<br />
codes from the vehicle and the <strong>ABS</strong> / Air Bag software. Use<br />
any instructions that were provided when reading the codes.<br />
For some vehicles the Diagnostic Trouble Codes menu<br />
screen may have a Clear Codes option. If so, refer to “Clear<br />
Codes” on page 38. If necessary, consult the manufacturer’s<br />
service manual for the correct “clear code” method.<br />
37