Catalog_02/2021_Englisch
In this catalog you will find the entire range of HP-Textiles GmbH.
In this catalog you will find the entire range of HP-Textiles GmbH.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Product <strong>Catalog</strong>ue<br />
Valid from April 1st, 2<strong>02</strong>1<br />
<strong>02</strong> / 2<strong>02</strong>1
CATEGORY<br />
Page<br />
CATEGORY<br />
Page<br />
Reinforcement Fabrics<br />
Polyester Non-Woven<br />
82 - 83<br />
Overview Carbon Fabrics<br />
4 - 5<br />
Perforate Release Film<br />
83<br />
Carbon Fabrics<br />
6 - 13<br />
Vacuum Bagging Film / Tube<br />
84 - 85<br />
Carbon Roving<br />
13<br />
Vacuum Mesh / Infusion Mesh<br />
86<br />
Overview Spread Tow Fabrics<br />
14<br />
Double-Sided Adhesive Tape<br />
87<br />
Spread Tow Carbon Fabrics<br />
15 - 16<br />
Spray adhesive<br />
87<br />
Overview Multiaxial Carbon Fabric<br />
17<br />
Sealant Tape<br />
88<br />
Multiaxial Carbon Fabrics<br />
18 - 23<br />
MTI ® -Hose<br />
89<br />
Carbon Fabric Tapes<br />
24 - 28<br />
PE Vacuum-Hose<br />
90<br />
Carbon Flat Braids and Sleeves<br />
29 - 30<br />
PU Vacuum-Hose<br />
90<br />
Design Fabrics<br />
31 - 33<br />
Spiral Tube for Vacuum Infusion<br />
91<br />
Overview Aramid Fabric<br />
34<br />
Blade Runner<br />
92 - 93<br />
Table of Content<br />
Aramid Fabrics<br />
Aramid Fabrics Tapes<br />
Overview Hybrid Fabric<br />
Hybrid Fabrics<br />
Overview Glass Fabrics<br />
Glass Filament Fabrics -Silane-<br />
Glass Filament Fabrics -Finish-<br />
Overview Glass Roving Fabrics<br />
Glass Roving Fabrics<br />
Glass Filament Fabric Tapes<br />
Glass Sleeves and Flat Braids<br />
Overview Chopped Strand Mats<br />
Chopped Strand Mats<br />
Combo Mats<br />
C-Glass Non Woven<br />
Mould Making Fabric<br />
Overview Multiaxial Glass Fabrics<br />
Multiaxial Glass Fabrics<br />
35<br />
36<br />
37<br />
38<br />
39 - 40<br />
41 - 43<br />
45 - 50<br />
52<br />
52 - 53<br />
54 - 57<br />
58 - 59<br />
60<br />
61 - 62<br />
63<br />
64<br />
65<br />
66<br />
67 - 71<br />
Tube Clip Squeezee ®<br />
Tube Clip Squeezer ®<br />
MTI ® -Valve<br />
IQS-Connectors<br />
Standard Push-Connectors<br />
Vac Checker<br />
Standard Manometer<br />
Vacuum Pumps<br />
Epoxy Resin Systems<br />
Overview Epoxy Resin<br />
Epoxy Priming Resin / Sealing<br />
Epoxy Filler<br />
Epoxy Adhesive Resin<br />
Mould covering Resin<br />
Laminating Resins<br />
Standard<br />
High Performance<br />
Multipurpose<br />
93<br />
94<br />
94 - 96<br />
96 - 97<br />
97<br />
98<br />
98 - 99<br />
100 - 101<br />
1<strong>02</strong><br />
103<br />
104 - 105<br />
106 - 107<br />
108 - 109<br />
110 - 111<br />
112 - 114<br />
Sandwichmaterial<br />
3D|Core TM<br />
Soric ® SF / LRC und Coremat<br />
72 - 75<br />
76 - 77<br />
High Heat Resistant<br />
Covering<br />
Injection Resin<br />
Statement of the DNV GL<br />
115<br />
116 - 117<br />
118 - 119<br />
Vacuum Technology<br />
Overview Vacuum Infusion<br />
Peel Ply<br />
78 - 79<br />
80 - 82<br />
Standard<br />
High Heat Resistant<br />
Covering Resins<br />
120 - 121<br />
122<br />
2<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
CATEGORY<br />
Page<br />
CATEGORY<br />
Page<br />
transparent<br />
123 - 124<br />
Priming Wax, Film release agent<br />
171<br />
colored<br />
125 - 127<br />
Carnauba Wax<br />
173<br />
Casting Resins<br />
128 - 132<br />
Release Agent for IMC / MTI<br />
173<br />
Coating and Surface Systems<br />
Silicone spray<br />
173<br />
Coating System<br />
133 - 134<br />
Levelling Coating System<br />
135 - 136<br />
Cleanser / Thinner<br />
Paving Joint Mortar<br />
137 - 139<br />
Aceton<br />
174<br />
Aquariums and Terrariums<br />
140 - 141<br />
XB-Thinner / IMC-Thinner<br />
174<br />
Reactive diluent RV-23<br />
175<br />
Polyester Resin Systems<br />
Handwash paste<br />
175<br />
Overview Polyester Resins<br />
142 - 143<br />
Orthophthalic-based<br />
144 - 146<br />
Filler / Additive<br />
ISO-NPG-based<br />
147 - 148<br />
Overview Fillers<br />
176 - 177<br />
Gelcoat ISO-NPG-based<br />
149<br />
Thixotropypowder<br />
178<br />
Topcoat ISO-NPG-based<br />
150 - 151<br />
Microballoons, Cotton Flocks<br />
179<br />
MEKP-Hardener<br />
Mould and Cast Resins<br />
Silicone-Rubber<br />
PUR Resins<br />
Acryl Casting Resin<br />
151<br />
153 - 154<br />
155 - 156<br />
157<br />
Shopped glass fibre<br />
Aluminium Powder<br />
Quartz sand<br />
Overview Additives<br />
Foaming-, Thickening, Degassing<br />
Levelling Agent, Light Stabilizer<br />
180<br />
180<br />
181<br />
182 - 183<br />
183<br />
183<br />
Table of Content<br />
Epoxi Casting Resin<br />
128 - 132<br />
Tools / Accesoires<br />
2K PU Coatings<br />
Degasser Roller<br />
184 - 185<br />
Grunding „Undercoating“<br />
1<strong>02</strong><br />
Lamininating-Sets<br />
186<br />
2K In-Mould-Coating (IMC)<br />
158 - 159<br />
Laminating Rollers, Brushes<br />
187 - 189<br />
1K Clear Coat<br />
159<br />
Measuring Jugs / Stirring Rods<br />
189 - 191<br />
2K PUR-PLUS Top Coat<br />
160 - 163<br />
Outlet valves<br />
192<br />
2K PUR-PLUS TEXTUR Top Coat<br />
161 - 163<br />
Jerrycans<br />
193<br />
2K PUR Top Coat<br />
164<br />
Perma Grit® / Sanding Tools<br />
194 - 196<br />
Jigsaw Blad<br />
197 - 198<br />
Dye<br />
Scraper, Squeegee<br />
199<br />
covering, metallic, neon<br />
165 - 168<br />
Gloves, Handwash paste<br />
200<br />
transparent and Deko Glitter<br />
169<br />
Complete Set‘s<br />
Release Agents<br />
Carbon Coating<br />
201<br />
Overview release Agents<br />
170 - 171<br />
Fibreglass repair<br />
2<strong>02</strong><br />
Mould Release Agent<br />
171<br />
Moulding<br />
2<strong>02</strong><br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 3
OVERVIEW CARBON FABRICS<br />
Carbon fibres have versatile properties. The main motive for the development of carbon fibres has come from the<br />
aerospace industry with its need for a material with a combination of high strength, high stiffness and low weight.<br />
These high-tenacity (HT) fibres provide excellently balanced mechanical laminate properties.<br />
Without carbon fibres many constructive solutions for aerospace would never have been possible. In the energy<br />
industry, these reinforcing fibres are used to the realization of wind turbines and fuel cell technology for high-pressure<br />
gas tank and gas diffusion, used for oil exploration in risers and for the reprocessing of nuclear fuel in a<br />
centrifuge. In medical technology, there are carbon-fiber back into Xray tables, prostheses and fixators. Industrial<br />
applications include rollers for the paper and printing industries, as well as optical and structural components<br />
in the automotive industry. For applications in the area of leisure are sports equipment (tennis racket, golf club<br />
shafts, bicycle frames, masts for sailing boats, surfboards, helmets, fishing rods) and musical instruments<br />
The potential applications of carbon fibres are very diverse!<br />
The Most Important Fabric Constructions:<br />
Plain<br />
• the simplest weave<br />
• very slip-resistant<br />
• bad drapability<br />
• suitable for flat plates or easy moulds<br />
Carbon<br />
Twill<br />
• diagonally running lines are characteristic<br />
• better drapability than plain weave<br />
• less slip-resistant<br />
• suitable for complicated geometries<br />
Satin<br />
• suitable for complicated geometries<br />
• very good drapability<br />
• low slip-resistance<br />
• less mesh crossing, therefore strength in the laminate<br />
• leaves a very smooth surface<br />
4 phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
OVERVIEW CARBON FABRICS<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
WEAVE<br />
STYLE<br />
THREADS/cm<br />
Warp / Weft<br />
YARN TYPE<br />
Warp Tex<br />
YARN TYPE<br />
Weft Tex<br />
THICKNESS<br />
mm<br />
** HP-P68C 68 Plain<br />
5,0 x 5,0 1K-67 1K-67 0,10<br />
6 HP-P80C 80 Plain<br />
6,0 x 6,0 1K-67 1K-67 0,12<br />
6 HP-P96C 93 Plain<br />
7,0 x 7,0 1K-67 1K-67 0,13<br />
** HP-P120C 120 Plain<br />
9,0 x 9,0 1K-67 1K-67 0,16<br />
** HP-S120C 120 Atlas 1/4 9,0 x 9,0 1K-67 1K-67 0,16<br />
** HP-T150C 150 Twill 2/2 12,0 x 10,0 1K-67 1K-67 0,20<br />
6 HP-P160C 160 Plain<br />
4,0 x 4,0 3K-200 3K-200 0,27<br />
6 HP-T160C 160 Twill 2/2 4,0 x 4,0 3K-200 3K-200 0,30<br />
7 HP-P195C 195 Plain<br />
4,8 x 4,8 3K-200 3K-200 0,30<br />
7 HP-T195C 195 Twill 2/2 4,8 x 4,8 3K-200 3K-200 0,30<br />
7 HP-P200C 200 Plain<br />
5,0 x 5,0 3K-200 3K-200 0,30<br />
7 HP-P200/<strong>02</strong>50C 200 Plain<br />
5,0 x 5,0 3K-200 3K-200 0,30<br />
8 HP-T200C 200 Twill 2/2 5,0 x 5,0 3K-200 3K-200 0,32<br />
11<br />
HP-U215C 215 UD 2,5 x 1,6 12K-800 0,2<br />
Thermoplast fixation<br />
** HP-T217C 217 x-Twill 3/1 5,2 x 5,2 3K-200 3K-200 0,32<br />
8 - 9 HP-T240C 245 Twill 2/2 6,0 x 6,0 3K-200 3K-200 0,35<br />
10<br />
HP-T240CE<br />
EP-Binder 245 Twill 2/2 6,0 x 6,0 3K-200 3K-200 0,35<br />
10<br />
**<br />
**<br />
**<br />
11<br />
**<br />
**<br />
**<br />
HP-T240/125CE<br />
Thermoplast fixation<br />
HP-P250C<br />
HP-P285C<br />
HP-T285C<br />
HP-T286C<br />
HP-S285C<br />
HP-T287C<br />
HP-P300C<br />
245<br />
250<br />
285<br />
285<br />
285<br />
285<br />
285<br />
300<br />
Twill 2/2<br />
Plain<br />
Plain<br />
Twill 2/2<br />
Twill 4/4<br />
Atlas 1/4<br />
Twill 2/2<br />
Plain<br />
6,0 x 6,0<br />
6,0 x 6,25<br />
7,0 x 7,0<br />
7,0 x 7,0<br />
7,0 x 7,0<br />
7,0 x 7,0<br />
3,5 x 3,5<br />
3,7 x 3,7<br />
3K-200<br />
3K-200<br />
3K-200<br />
3K-200<br />
3K-200<br />
3K-200<br />
6K-400<br />
6K-400<br />
3K-200<br />
3K-200<br />
3K-200<br />
3K-200<br />
3K-200<br />
3K-200<br />
6K-400<br />
6K-400<br />
0,35<br />
0,33<br />
0,38<br />
0,43<br />
0,43<br />
0,45<br />
0,47<br />
0,42<br />
12<br />
HP-U315C 315 UD 3,65 x 1,6 12K-800 0,3<br />
Thermoplast fixation<br />
Carbon<br />
**<br />
**<br />
**<br />
**<br />
12<br />
12<br />
**<br />
**<br />
**<br />
13<br />
**<br />
HP-T370C<br />
HP-S372C<br />
HP-P375C<br />
HP-T400C<br />
HP-P400C<br />
HP-T421C<br />
HP-P460C<br />
HP-T460C<br />
HP-P600C<br />
HP-T600C<br />
HP-T660C<br />
370<br />
370<br />
375<br />
400<br />
400<br />
420<br />
460<br />
460<br />
600<br />
600<br />
660<br />
x-Twill 3/1<br />
Atlas 1/4<br />
Plain<br />
x-Twill 3/1<br />
Plain<br />
Twill 2/2<br />
Plain<br />
Twill 2/2<br />
Plain<br />
Twill 2/2<br />
Twill 2/2<br />
4,6 x 4,6<br />
2,3 x 2,3<br />
2,3 x 2,3<br />
5,0 x 5,0<br />
2,5 x 2,5<br />
2,6 x 2,6<br />
2,8 x 2,8<br />
2,8 x 2,8<br />
3,7 x 3,7<br />
3,7 x 3,7<br />
4,1 x 4,1<br />
6K-400<br />
12K-800<br />
12K-800<br />
6K-400<br />
12K-800<br />
12K-800<br />
12K-800<br />
12K-800<br />
12K-800<br />
12K-800<br />
12K-800<br />
6K-400<br />
12K-800<br />
12K-800<br />
6K-400<br />
12K-800<br />
12K-800<br />
12K-800<br />
12K-800<br />
12K-800<br />
12K-800<br />
12K-800<br />
0,61<br />
0,61<br />
0,63<br />
0,60<br />
0,64<br />
0,64<br />
0,70<br />
0,73<br />
0,85<br />
0,85<br />
0,93<br />
** These articles, as well as different weights, constructions and widths are available upon request!<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 5
Carbon Fabrics 1K<br />
Article: HP-P80C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 67,70 56,89<br />
from 3m² 64,90 54,54<br />
from 5m² 62,95 52,90<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
59,65<br />
56,66<br />
54,66<br />
50,13<br />
47,61<br />
45,93<br />
from 100m² on request<br />
Fields of Application:<br />
Sandwich construction, model<br />
making, thin coatings, boat<br />
constructions, carbon design,<br />
airplane model construction.<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Suitable for<br />
80 g/m²<br />
100 cm<br />
Plain<br />
6 y./cm<br />
6 y./cm<br />
HT-Fibre / 1K 67tex<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 96g/m², laminate thickness: 0,13mm, laminate weight: 176g/m²<br />
Article: HP-P96C<br />
Technical Data<br />
Carbon<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
69,97 58,80<br />
68,50 57,56<br />
65,39 54,95<br />
62,23 52,29<br />
58,89 49,49<br />
56,99 47,89<br />
on request<br />
Fields of Application:<br />
Sandwich construction, thin coatings,<br />
carbon design.<br />
Tight mesh due to the use of fine<br />
yarn and a high number of threads.<br />
Weight<br />
93 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 111g/m², laminate thickness: 0,11mm, laminate weight: 1111g/m²<br />
Carbon Fabrics 3K 160g/m²<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Suitable for<br />
100 cm<br />
Plain<br />
7 y./cm<br />
7 y./cm<br />
HT-Fibre / 1K 67tex<br />
epoxy resin<br />
Article: HP-P160C<br />
Plain Width: 100cm<br />
Article: HP-T160C<br />
Twill Width: 100cm<br />
Technical Data<br />
Weight 160 g/m²<br />
Width 100 cm<br />
Construction<br />
Plain / Twill<br />
Warp<br />
4 y./cm<br />
Weft<br />
4 y./cm<br />
Fibre<br />
HT-Fibre / 3K 200tex<br />
Price €/m² incl. VAT net<br />
from 1m² 22,49 18,90<br />
from 3m² 18,92 15,90<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment.<br />
Suitable for<br />
epoxy resin<br />
from 5m²<br />
17,81 14,97<br />
from 10m²<br />
16,54 13,90<br />
from 25m²<br />
15,29 12,85<br />
from 50m²<br />
13,98 11,75<br />
from 100m²<br />
13,49 11,34<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 192g/m², laminate thickness: 0,26mm, laminate weight: 352g/m²<br />
6 phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon Fabrics 3K 195g/m²<br />
Article: HP-P195C<br />
Plain Width: 100cm<br />
Article: HP-T195C<br />
Twill Width: 100cm<br />
Technical Data<br />
Weight 195 g/m²<br />
Width 100 cm<br />
Construction<br />
Plain / Twill<br />
Warp<br />
4,8 y./cm<br />
Weft<br />
4,8 y./cm<br />
Fibre<br />
HT-Fibre / 3K 200tex<br />
Price €/m² incl. VAT net<br />
from 1m² 24,95 20,97<br />
from 3m² 21,30 17,90<br />
from 5m² 19,99 16,80<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
18,79<br />
17,40<br />
16,30<br />
15,40<br />
15,79<br />
14,62<br />
13,70<br />
12,94<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment.<br />
Suitable for<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 234g/m², laminate thickness: 0,31mm, laminate weight: 429g/m²<br />
Carbon Fabrics 3K 200g/m²<br />
Article: HP-P200C<br />
Plain Width: 100cm<br />
Article: HP-P200/<strong>02</strong>50C<br />
Plain Width: 25cm<br />
Technical Data<br />
Weight 200 g/m²<br />
Width 25 cm / 100cm<br />
Carbon<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Plain<br />
5 y./cm<br />
5 y./cm<br />
HT-Fibre / 3K 200tex<br />
Price €/m² incl. VAT net<br />
from 1m² 26,95 22,65<br />
from 3m² 22,49 18,90<br />
from 5m² 20,99 17,64<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
19,50<br />
17,79<br />
16,60<br />
15,80<br />
16,39<br />
14,95<br />
13,95<br />
13,28<br />
Price €/m² incl. VAT net<br />
from 1m² 27,97 23,50<br />
from 3m² 23,68 19,90<br />
from 5m² 21,99 18,48<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
20,69<br />
18,98<br />
17,79<br />
16,99<br />
17,39<br />
15,95<br />
14,95<br />
14,28<br />
Suitable for<br />
epoxy resin<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment.<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,32mm, laminate weight: 440g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 7
Carbon Fabrics 3K 200g/m²<br />
Article: HP-T200C<br />
Twill Width: 100cm<br />
Article: HP-T200/120C<br />
Twill Width: 120cm<br />
Technical Data<br />
Weight 200 g/m²<br />
Width 100 cm / 120 cm<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Twill<br />
5 y./cm<br />
5 y./cm<br />
HT-Fibre / 3K 200tex<br />
Price €/m² incl. VAT net<br />
from 1m² 26,95 22,65<br />
from 3m² 22,49 18,90<br />
from 5m² 20,99 17,64<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
19,50<br />
17,79<br />
16,60<br />
15,80<br />
16,39<br />
14,95<br />
13,95<br />
13,28<br />
Price €/m² incl. VAT net<br />
from 1m² 26,95 22,65<br />
from 3m² 22,49 18,90<br />
from 5m² 20,99 17,64<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 120m²<br />
19,50<br />
17,79<br />
16,60<br />
15,80<br />
16,39<br />
14,95<br />
13,95<br />
13,28<br />
Suitable for<br />
epoxy resin<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment.<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,32mm, laminate weight: 440g/m²<br />
Carbon<br />
Carbon Fabrics 3K 245g/m²<br />
Technical Data<br />
Weight 245 g/m²<br />
Width 100 / 127 cm<br />
Construction<br />
Twill<br />
Warp<br />
6 y./cm<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment.<br />
IDEAL FOR A<br />
VISIBLE<br />
CARBON LOOK<br />
Weft<br />
Fibre<br />
Suitable for<br />
6 y./cm<br />
HT-Fibre / 3K 200tex<br />
epoxy resin<br />
Article: HP-T240C<br />
Twill Width: 100cm<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
29,99 25,20<br />
27,25 22,90<br />
24,97 20,98<br />
23,50 19,75<br />
21,60 18,15<br />
19,99 16,80<br />
18,92 15,90<br />
Article: HP-T240/125C<br />
Twill Width: 127cm<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 127m²<br />
29,99 25,20<br />
27,25 22,90<br />
24,97 20,98<br />
23,50 19,75<br />
21,60 18,15<br />
19,99 16,80<br />
18,92 15,90<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 288g/m², laminate thickness: 0,39mm, laminate weight: 528g/m²<br />
8 phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon Fabrics 3K 245g/m² - Special Widths -<br />
Technical Data<br />
Weight<br />
245 g/m²<br />
Width<br />
50 / 150 cm<br />
Construction<br />
Twill<br />
Warp<br />
6 y./cm<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment.<br />
IDEAL FOR A<br />
VISIBLE<br />
CARBON LOOK<br />
Weft<br />
Fibre<br />
Suitable for<br />
6 y./cm<br />
HT-Fibre / 3K 200tex<br />
epoxy resin<br />
ENGINE COWLINGS<br />
Article: HP-T240/050C<br />
Twill Width: 50cm<br />
Price €/m² incl. VAT net<br />
Article: HP-T240/150C<br />
Twill Width: 150cm<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
29,99 25,20<br />
from 1m²<br />
31,99 26,88<br />
from 3m²<br />
27,25 22,90<br />
from 3m²<br />
28,98 24,35<br />
from 5m²<br />
24,97 20,98<br />
from 5m²<br />
27,25 22,90<br />
from 10m²<br />
23,50 19,75<br />
from 10m²<br />
24,97 20,98<br />
from 25m²<br />
21,60 18,15<br />
from 25m²<br />
23,56 19,80<br />
from 50m²<br />
19,99 16,80<br />
from 50m²<br />
21,90 18,40<br />
from 100m²<br />
18,92 15,90<br />
from 150m²<br />
20,11 16,90<br />
+ For smaller and / or oblong<br />
components,<br />
e.g. snowboards, car parts<br />
+ Simple handling<br />
+ For wide and / or large components,<br />
e.g. engine cowlings<br />
Carbon<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 288g/m², laminate thickness: 0,39mm, laminate weight: 528g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 9
Carbon Fabrics 3K 245g/m²<br />
Technical Data<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment.<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Suitable for<br />
245 g/m²<br />
127 cm<br />
Twill<br />
6 y./cm<br />
6 y./cm<br />
HT-Fibre / 3K 200tex<br />
epoxy resin<br />
Article: HP-T240CE<br />
Twill Width: 100cm<br />
Article: HP-T240/127CE<br />
Twill Width: 127cm<br />
Price €/m² incl. VAT net<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
35,58 29,90<br />
33,20 27,90<br />
30,82 25,90<br />
29,16 24,50<br />
27,31 22,95<br />
25,59 21,50<br />
23,68 19,90<br />
NON-SLIPPING<br />
IDEAL FOR A<br />
VISIBLE<br />
CARBON LOOK<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 127m²<br />
35,58 29,90<br />
33,20 27,90<br />
30,82 25,90<br />
29,16 24,50<br />
27,31 22,95<br />
25,59 21,50<br />
23,68 19,90<br />
Carbon<br />
This Carbon Fabric is one-sided<br />
fixed with an EP-binder.<br />
(EP-Binder approx. 10-15g/m²)<br />
+ no fraying when cutting<br />
+ fabric is heat-formable<br />
This Carbon Fabric is one-sided<br />
fixed with an EP-binder.<br />
(EP-Binder approx. 10-15g/m²)<br />
+ no fraying when cutting<br />
+ fabric is heat-formable<br />
Back with EP-Binder<br />
Back with EP-Binder<br />
10<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon Fabrics 3K 285g/m²<br />
Article: HP-T286C<br />
Technical Data<br />
Weight<br />
Width<br />
285 g/m²<br />
125cm<br />
Construction Twill 4/4<br />
Warp 7 y./cm<br />
Weft 7 y./cm<br />
Fibre<br />
HT-Fibre / 3K 200tex<br />
Price €/m² incl. VAT net<br />
from 1m² 38,68 32,50<br />
from 3m² 36,83 30,95<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment, carbon<br />
design.<br />
Suitable for<br />
epoxy resin<br />
from 5m²<br />
31,95 26,85<br />
from 10m²<br />
from 25m²<br />
30,45 25,59<br />
28,44 23,90<br />
IDEAL FOR<br />
COMPLEX GEOMETRIES<br />
from 50m²<br />
25,94 21,80<br />
from 100m²<br />
24,87 20,90<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 342g/m², laminate thickness: 0,46mm, laminate weight: 627g/m²<br />
Carbon<br />
Carbon Fabrics 12K Unidirectional -Thermoplast fixation-<br />
This Carbon-Fabric is due to the special manufacturing process very hard-wearing and easy to handle. Shiftings<br />
are almost impossible because of the thermosetting (Hotmelt-fibre in Weft). No fraying of the cutting edge.<br />
Article: HP-U215C<br />
Price €/m² incl. VAT net<br />
from 1m² 15,95 13,40<br />
from 3m² 15,59 13,10<br />
from 5m² 14,88 12,50<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
13,45<br />
12,38<br />
11,25<br />
10,59<br />
11,30<br />
10,40<br />
9,45<br />
8,90<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment,<br />
sandwich construction, orthopedic<br />
technology<br />
Technical Data<br />
Weight approx. 215 g/m²<br />
Width 100 cm<br />
Construction Unidirectional 0°<br />
Warp 2,5 y./cm<br />
Weft 1,6 y./cm<br />
Fibre Warp HT-Fibre 12K 800tex<br />
Weft E-Glass / Hotmelt<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 258g/m², laminate thickness: 0,35mm, laminate weight: 473g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 11
Carbon Fabrics 12K Uniderectional -Thermoplast fixation-<br />
Article: HP-U315C<br />
Price €/m² incl. VAT net<br />
from 1m² 22,49 18,90<br />
from 3m² 21,30 17,90<br />
from 5m² 19,75 16,60<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
17,79<br />
16,30<br />
14,88<br />
13,92<br />
14,95<br />
13,70<br />
12,50<br />
11,70<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment,<br />
sandwich construction, orthopedic<br />
technology<br />
Technical Data<br />
Weight approx. 315 g/m²<br />
Width 100 cm<br />
Construction Unidirectional 0°<br />
Warp 3,65 y./cm<br />
Weft 1,6 y./cm<br />
Fibre Warp HT-Fibre 12K 800tex<br />
Weft E-Glass / Hotmelt<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 378g/m², laminate thickness: 0,51mm, laminate weight: 693g/m²<br />
Carbon Fabrics 12K approx. 400g/m²<br />
Carbon<br />
Article: HP-P400C<br />
Price €/m² incl. VAT net<br />
from 1m² 25,99 21,84<br />
Technical Data<br />
Weight 400 g/m²<br />
Width 100 cm<br />
from 3m²<br />
22,59 18,98<br />
Construction<br />
Plain<br />
from 5m²<br />
21,30 17,90<br />
Warp<br />
2,5 y./cm<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
19,98 16,79<br />
18,39 15,45<br />
16,90 14,20<br />
16,48 13,85<br />
Fields of Application:<br />
Model making, boat construction,<br />
motor sports, sports equipment.<br />
Weft<br />
Fibre<br />
Suitable for<br />
2,5 y./cm<br />
HT-Fibre / 12K 800tex<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 480g/m², laminate thickness: 0,64mm, laminate weight: 880g/m²<br />
Article: HP-T421C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 25,99 21,84<br />
from 3m² 22,59 18,98<br />
from 5m² 21,30 17,90<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
19,98<br />
18,39<br />
16,90<br />
16,48<br />
16,79<br />
15,45<br />
14,20<br />
13,85<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment, carbon<br />
design.<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Suitable for<br />
420 g/m²<br />
100 cm<br />
Twill<br />
2,6 y./cm<br />
2,6 y./cm<br />
HT-Fibre / 12K 800tex<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 530g/m², laminate thickness: 0,67mm, laminate weight: 924g/m²<br />
12<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon Fabrics 12K 600g/m²<br />
Article: HP-T600C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 35,58 29,90<br />
from 3m² 31,99 26,88<br />
from 5m² 29,99 25,20<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
28,50<br />
27,25<br />
25,99<br />
24,95<br />
23,95<br />
22,90<br />
21,84<br />
20,97<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment, carbon<br />
design.<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Suitable for<br />
600 g/m²<br />
100 cm<br />
Twill<br />
3,7 y./cm<br />
3,7 y./cm<br />
HT-Fibre / 12K 800tex<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 720g/m², laminate thickness: 0,96mm, laminate weight: 1320g/m²<br />
Carbon Fibre Roving<br />
This 50K fibre strand is with 50.000 single filaments more than twice as heavy and wide as the conventional 24K<br />
fibre. Therefore, the price-performance ratio (€/Kg) is very interesting.<br />
Article: HP-HT-50K<br />
Technical Data<br />
Price €/roll incl. VAT net<br />
50m (188g)<br />
Basic price/100g<br />
100m (375g)<br />
Basic price/100g<br />
250m (938g)<br />
Basic price/100g<br />
12,97<br />
6,90<br />
23,68<br />
6,31<br />
41,53<br />
4,42<br />
10,90<br />
5,79<br />
19,90<br />
5,30<br />
34,90<br />
3,72<br />
Fibre: Panex 35 ®<br />
Density: 1,81 g/m³<br />
Tensile Modulus: 241 GPa<br />
Fibre Diameter 7,2 µm<br />
Filament count: 50.000 = 50K<br />
Weight:<br />
approx. 3,75 g/m<br />
Suitable for epoxy resin<br />
Carbon<br />
1500m (5,6kg)<br />
Basic price/100g<br />
190,28 159,90<br />
3,28 2,70<br />
** Suitable for hand laminating, winding and pultrusion**<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 13
OVERVIEW SPREAD TOW CARBON FABRICS<br />
The Spread-Tow-Carbon-Fabric is a fabric with spreaded fibres.<br />
It is very thin through the spreading of the single filaments but nevertheless the fabric is very closed. You achieve<br />
an increased strength and a lower resin consumption because of the low fibre bending. It is ideal for design<br />
applications because of its unique carbon look.<br />
Carbon<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
WEAVE<br />
STYLE<br />
THREADS/cm<br />
Warp / Weft<br />
YARN TYPE<br />
Warp Tex<br />
YARN TYPE<br />
Weft Tex<br />
STRAND WIDTH<br />
mm<br />
15 HP-P64S25C 64 Plain<br />
0,4 x 0,4 12K 12K 25<br />
** HP-T64S25C 64 Twill 2/2 0,4 x 0,4 12K 12K 25<br />
15 HP-P80S20C 80 Plain<br />
0,5 x 0,5 12K 12K 20<br />
** HP-T80S20C 80 Twill 2/2 0,5 x 0,5 12K 12K 20<br />
15 HP-P100S16C 100 Plain<br />
0,6 x 0,6 12K 12K 16<br />
** HP-T100S16C 100 Twill 2/2 0,6 x 0,6 12K 12K 16<br />
** HP-P160S15C 160 Plain 0,66 x 0,66 15K 15K 15<br />
** HP-P160S25C 160 Plain<br />
0,4 x 0,4 15K 15K 25<br />
** HP-T160S15C 160 Twill 2/2 0,66 x 0,66 15K 15K 15<br />
16 HP-P161SC 160 Plain<br />
4 x 4 3K 3K 2,5<br />
16 HP-T161SC 160 Twill 2/2<br />
4 x 4 3K 3K 2,5<br />
16 HP-P193C 193 Plain<br />
1,2 x 1,2 12K 12K 8,3<br />
16 HP-T193C 193 Twill 2/2 1,2 x 1,2 12K 12K 8,3<br />
** HP-P201SC 200 Plain<br />
5 x 5 3K 3K 2<br />
** HP-T201SC 200 Twill 2/2<br />
5 x 5 3K 3K 2<br />
** These articles, as well as different weights, constructions and widths are available upon request!<br />
14<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Spread Tow Carbon Fabrics<br />
Article: HP-P64S25C<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 63,5m²<br />
PRICES AND<br />
AVAILABILITY UPON<br />
REQUEST<br />
Spread Tow Carbon Fabric<br />
strand width: approx. 25mm<br />
Fields of Application:<br />
high-strength, thin laminates,<br />
model making, motor sports,<br />
sports equipment.<br />
Technical Data<br />
Weight 64 g/m²<br />
Width approx. 127 cm<br />
Construktion Plain<br />
Warp 0,4 y./cm<br />
Weft 0,4 y./cm<br />
Fibre HT-Fibre / 12K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 77g/m², laminate thickness: 0,10mm, laminate weight: 141g/m²<br />
Article: HP-P80S20C<br />
Price €/m² incl. VAT net<br />
from 1m² 61,64 51,80<br />
from 3m² 57,95 48,70<br />
from 5m² 53,49 44,95<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
49,92<br />
48,49<br />
44,49<br />
41,95<br />
40,75<br />
37,39<br />
Spread Tow Carbon Fabric<br />
strand width: approx. 20mm<br />
Fields of Application:<br />
high-strength, thin laminates,<br />
model making, motor sports,<br />
sports equipment.<br />
Technical Data<br />
Weight 80 g/m²<br />
Width approx. 1<strong>02</strong> cm<br />
Construktion Plain<br />
Warp 0,5 y./cm<br />
Weft 0,5 y./cm<br />
Fibre HT-Fibre / 12K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 96g/m², laminate thickness: 0,13mm, laminate weight: 176g/m²<br />
Article: HP-P100S16C<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
PRICES AND<br />
AVAILABILITY UPON<br />
REQUEST<br />
Spread Tow Carbon Fabric<br />
strand width: approx. 16mm<br />
Fields of Application:<br />
high-strength, thin laminates,<br />
model making, motor sports,<br />
sports equipment.<br />
Technical Data<br />
Weight<br />
Width<br />
Construktion<br />
Warp<br />
Weft<br />
Fibre<br />
Suitable for<br />
100 g/m²<br />
1<strong>02</strong> cm<br />
Plain<br />
0,6 y./cm<br />
0,6 y./cm<br />
HT-Fibre / 12K<br />
epoxy resin<br />
Carbon<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 120g/m², laminate thickness: 0,16mm, laminate weight: 220g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 15
Spread Tow Carbon Fabrics<br />
Article: HP-P161SC<br />
Price €/m² incl. VAT net<br />
from 1m² 29,74 24,99<br />
from 3m² 27,67 23,25<br />
from 5m² 25,59 21,50<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
24,10<br />
22,49<br />
20,59<br />
20,25<br />
18,90<br />
17,30<br />
Spread Tow Carbon Fabric<br />
strand width: approx. 2,5mm<br />
Fields of Application:<br />
high-strength, thin laminates, model<br />
making, motor sports, sports equipment.<br />
Technical Data<br />
Weight 160 g/m²<br />
Width 100 cm<br />
Construktion Plain<br />
Warp 4 y./cm<br />
Weft 4 y./cm<br />
Fibre HT-Fibre / 3K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 192g/m², laminate thickness: 0,26mm, laminate weight: 352g/m²<br />
Article: HP-T161SC<br />
Price €/m² incl. VAT net<br />
from 1m² 29,74 24,99<br />
from 3m² 27,67 23,25<br />
from 5m² 25,59 21,50<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
24,10<br />
22,49<br />
20,59<br />
20,25<br />
18,90<br />
17,30<br />
Spread Tow Carbon Fabric<br />
strand width: approx. 2,5mm<br />
Fields of Application:<br />
high-strength, thin laminates, model<br />
making, motor sports, sports equipment.<br />
Technical Data<br />
Weight 160 g/m²<br />
Width 100 / 125 cm<br />
Construktion Twill 2/2<br />
Warp 4 y./cm<br />
Weft 4 y./cm<br />
Fibre HT-Fibre / 3K<br />
Suitable for epoxy resin<br />
Carbon<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 192g/m², laminate thickness: 0,26mm, laminate weight: 352g/m²<br />
Article: HP-P193C<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 127m²<br />
28,50 23,95<br />
26,89 22,60<br />
25,59 21,50<br />
23,68 19,90<br />
21,99 18,48<br />
21,30 17,90<br />
on request<br />
Spread Tow Carbon Fabric<br />
strand width: approx. 8,3mm<br />
Fields of Application:<br />
model making, motor sports, sports<br />
equipment.<br />
Technical Data<br />
Weight<br />
Width<br />
Construktion<br />
Warp<br />
Weft<br />
Fibre<br />
Suitable for<br />
193 g/m²<br />
127 cm<br />
Plain<br />
1,2 y./cm<br />
1,2 y./cm<br />
HT-Fibre / 12K<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 425g/m²<br />
Article: HP-T193C<br />
Price €/m² incl. VAT net<br />
from 1m² 31,65 26,60<br />
from 3m² 29,99 25,20<br />
from 5m² 28,32 23,80<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
26,66<br />
24,87<br />
23,21<br />
22,40<br />
20,90<br />
19,50<br />
from 127m² on request<br />
Spread Tow Carbon Fabric<br />
strand width: approx. 8,3mm<br />
OFFER WHILE<br />
STOCKS LAST<br />
Technical Data<br />
Weight 193 g/m²<br />
Width 127 cm<br />
Construktion Twill<br />
Warp 1,2 y./cm<br />
Weft 1,2 y./cm<br />
Fibre HT-Fibre / 12K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 425g/m²<br />
16<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
OVERVIEW MULTIAXIAL CARBON FABRICS<br />
Non-woven Multiaxial Carbon Fabrics are textile structures. Their fibres are endless and located parallel to each<br />
other. They are fixed together with a sewing thread or with thermosetting. Many areas increase their competitiveness<br />
by using the advantages of multiaxial fabrics, whether in aerospace, boat building or motor sports.<br />
+45°<br />
-45°<br />
Quality features<br />
• Suitable for epoxy, polyester and vinylester resin<br />
• Better mechanical properties<br />
• Good wet out and lower resin consumption<br />
• Load oriented fibre orientation<br />
Applications<br />
• Boat construction<br />
• Sport equipment<br />
• Motor sports<br />
• Motor blades<br />
• Mould and tank construction<br />
0°<br />
90°<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
CONSTRUCTION FIBRE STITCH TYPE WIDTH<br />
cm<br />
18 HP-U050/50C 50 0° HT-Fibre 50K or 24K Carbon -<br />
50<br />
18 HP-U080/50C 80 0° HT-Fibre 50K or 24K Carbon -<br />
50<br />
18 HP-U100/50C 100 0° HT-Fibre 50K or 24K Carbon -<br />
50<br />
18 HP-U158/122C 158 0° HT-Fibre 50K Carbon<br />
Tricot 122<br />
19 HP-U200/60C 200 0° HT-Fibre 50K Carbon<br />
Tricot 60<br />
19 HP-U300/61C 300 0° HT-Fibre 50K Carbon<br />
Tricot 61<br />
19 HP-U500/123C 500 0° HT-Fibre 50K Carbon<br />
Tricot 123<br />
20 HP-B205C 205 0° / 90° HT-Fibre 50K Carbon<br />
Tricot 127<br />
20 HP-B412C 400 0° / 90° HT-Fibre 50K Carbon<br />
Tricot 127<br />
20 HP-B080C 80 +45° / -45° HT-Fibre 24K Carbon Franse 127<br />
21 HP-B100C 100 +45° / -45° HT-Fibre 24K Carbon Franse 127<br />
21 HP-B141C 140 +45° / -45° HT-Fibre 24K Carbon Franse 127<br />
21 HP-B200C 200 +45° / -45° HT-Fibre 50K Carbon Franse 127<br />
21 HP-B200C/12K 200 +45° / -45° HT-Fibre 12K Carbon Franse 127<br />
22 HP-B305C 300 +45° / -45° HT-Fibre 50K Carbon Franse 127<br />
22 HP-B415C 410 +45° / -45° HT-Fibre 50K Carbon Franse 127<br />
22 HP-B600C 600 +45° / -45° HT-Fibre 50K Carbon Franse 127<br />
22 HP-T300C 300 +45 / -45° / 0° HT-Fibre 50K Carbon<br />
Tricot 127<br />
23 HP-T450C 450 +45 / -45° / 0° HT-Fibre 50K Carbon<br />
Tricot 127<br />
23 HP-Q305C 300 0°/-45°/90°/+45° HT-Fibre 50K Carbon<br />
Tricot 127<br />
23 HP-Q600C 600 0°/-45°/90°/+45° HT-Fibre 50K Carbon<br />
Tricot 127<br />
23 HP-Q810C 800 0°/-45°/90°/+45° HT-Fibre 50K Carbon<br />
Tricot 127<br />
Carbon<br />
** These articles, as well as different weights, constructions and widths are available upon request!<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 17
Carbon Fabric Unidirectional 0° - Thermofixed -<br />
Article: HP-U050/50C<br />
Price €/m² incl. VAT net<br />
from 1m² 10,70 8,99<br />
from 3m² 10,12 8,50<br />
from 5m² 9,76 8,20<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
8,93<br />
8,27<br />
7,74<br />
7,08<br />
7,50<br />
6,95<br />
6,50<br />
5,95<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment.<br />
Technical Data<br />
Weight 50 g/m²<br />
Width<br />
50 cm<br />
Unidirectional 0°<br />
0° 50 g/m²<br />
Fibre<br />
HT-Fibre / 50K or 24K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 45 vol. % fibres: resin consumption: 39,5g/m², laminate thickness: 0,06mm, laminate weight: 89,5g/m²<br />
Article: HP-U080/50C<br />
Price €/m² incl. VAT net<br />
from 1m² 11,31 9,50<br />
from 3m² 10,65 8,95<br />
from 5m² 10,35 8,70<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
9,51<br />
8,75<br />
8,21<br />
7,74<br />
7,99<br />
7,35<br />
6,90<br />
6,50<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment.<br />
Technical Data<br />
Weight 80 g/m²<br />
Width<br />
50 cm<br />
Unidirectional 0°<br />
0° 80 g/m²<br />
Fibre<br />
HT-Fibre / 50K or 24K<br />
Suitable for epoxy resin<br />
Carbon<br />
Calculated data for hand laminate with 45 vol. % fibres: resin consumption: 65g/m², laminate thickness: 0,10mm, laminate weight: 145g/m²<br />
Article: HP-U100/50C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 11,78 9,90<br />
from 3m² 11,29 9,49<br />
from 5m² 10,69 8,98<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
9,88<br />
9,10<br />
8,45<br />
8,03<br />
8,30<br />
7,65<br />
7,10<br />
6,75<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment.<br />
Weight 100 g/m²<br />
Width<br />
50 cm<br />
Unidirectional 0°<br />
0° 100 g/m²<br />
Fibre<br />
HT-Fibre / 50K or 24K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 45 vol. % fibres: resin consumption: 80g/m², laminate thickness: 0,12mm, laminate weight: 180g/m²<br />
Article: HP-U158/122C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 122m²<br />
11,78 9,90<br />
11,29 9,49<br />
10,69 8,98<br />
9,88 8,30<br />
9,10 7,65<br />
8,45 7,10<br />
7,97 6,70<br />
Fields of Application:<br />
Model making, motor sports,<br />
boat construction, sports equipment,<br />
mould and tank construction,<br />
masts, rotor blades.<br />
Weight<br />
158 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 190g/m², laminate thickness: 0,25mm, laminate weight: 348g/m²<br />
Width<br />
Unidirectional 0°<br />
122 cm<br />
0° 158 g/m²<br />
90° 9,8 g/m² (E-Glass)<br />
Fibre<br />
Suitable for<br />
HT-Fibre / 50K<br />
epoxy resin<br />
18<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon Fabric Unidirectional 0°<br />
Article: HP-U200/60C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 30,5m²<br />
from 61m²<br />
15,41 12,95<br />
14,88 12,50<br />
14,16 11,90<br />
12,97 10,90<br />
11,78 9,90<br />
10,53 8,85<br />
Fields of Application:<br />
Model making, motor sports,<br />
boat construction, sports equipment,<br />
mould and tank construction,<br />
masts, rotor blades.<br />
Weight<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,32mm, laminate weight: 440g/m²<br />
Width<br />
Unidirectional 0°<br />
200 g/m²<br />
61 cm<br />
0° 200 g/m²<br />
Fibre<br />
Suitable for<br />
HT-Fibre / 50K<br />
epoxy resin<br />
Article: HP-U300/61C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 30,5m²<br />
from 61m²<br />
22,49 18,90<br />
21,30 17,90<br />
20,11 16,90<br />
18,92 15,90<br />
17,20 14,45<br />
15,17 12,75<br />
Fields of Application:<br />
Model making, motor sports,<br />
boat construction, sports equipment,<br />
mould and tank construction,<br />
masts, rotor blades.<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 360g/m², laminate thickness: 0,48mm, laminate weight: 660g/m²<br />
Article: HP-U500/123C<br />
Weight<br />
Width<br />
Unidirectional 0°<br />
300 g/m²<br />
61 cm<br />
0° 300 g/m²<br />
Fibre<br />
Suitable for<br />
Technical Data<br />
HT-Fibre / 50K<br />
epoxy resin<br />
Carbon<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 61,5m²<br />
29,39 24,70<br />
28,20 23,70<br />
27,07 22,75<br />
24,75 20,80<br />
23,21 19,50<br />
21,66 18,20<br />
Fields of Application:<br />
Model making, motor sports,<br />
boat construction, sports equipment,<br />
mould and tank construction,<br />
masts, rotor blades.<br />
Weight<br />
500 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 600g/m², laminate thickness: 0,80mm, laminate weight: 1100g/m²<br />
Width<br />
Unidirectional 0°<br />
123 cm<br />
0° 500 g/m²<br />
Fibre<br />
Suitable for<br />
HT-Fibre / 50K<br />
epoxy resin<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 19
Carbon Fabric Bidirectional 0°/90°<br />
Article: HP-B205C<br />
Price €/m² incl. VAT net<br />
from 1m² 19,64 16,50<br />
from 3m² 17,73 14,90<br />
from 5m² 16,54 13,90<br />
from 10m² 15,35 12,90<br />
from 25m² 13,69 11,50<br />
from 63,5m² 12,85 10,80<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
Technical Data<br />
Weight 200 g/m²<br />
Width 127 cm<br />
Bidirectional 0°/90°<br />
0° 100 g/m²<br />
90° 100 g/m²<br />
Fibre HT-Fibre / 50K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 194g/m², laminate thickness: 0,28mm, laminate weight: 394g/m²<br />
Article: HP-B412C<br />
Price €/m² incl. VAT net<br />
from 1m² 23,74 19,95<br />
from 3m² 22,49 18,90<br />
from 5m² 21,99 18,48<br />
from 10m² 19,99 16,80<br />
from 25m² 18,74 15,75<br />
from 63,5m² 17,49 14,70<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
Technical Data<br />
Weight 400 g/m²<br />
Width 127 cm<br />
Bidirectional 0°/90°<br />
0° 200 g/m²<br />
90° 200 g/m²<br />
Fibre HT-Fibre / 50K<br />
Suitable for epoxy resin<br />
Carbon<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 400g/m², laminate thickness: 0,58mm, laminate weight: 810g/m²<br />
!<br />
Carbon Fabric Bidiagonal +45°/-45°<br />
Article: HP-B080C*<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 63,5m²<br />
27,25 22,90<br />
25,95 21,81<br />
24,40 20,50<br />
22,49 18,90<br />
20,83 17,50<br />
18,92 15,90<br />
Very light and good drapability!<br />
Fields of Application:<br />
Model making, sport equipment,<br />
motor sports, automotive industry.<br />
Technical Data<br />
Weight<br />
80 g/m²<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 85g/m², laminate thickness: 0,1mm, laminate weight: 173g/m²<br />
Width<br />
127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 40 g/m²<br />
-45° 40 g/m²<br />
Fibre<br />
Suitable for<br />
HT-Fibre / 24K<br />
epoxy resin<br />
* Due to the low weight of HP-B080C, HP-B100C and HP-B141C, gaps on the fabrics are<br />
possible. Such gaps do not constitute from bad quality.<br />
20<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
!<br />
Article: HP-B100C*<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
24,87 20,90<br />
from 3m²<br />
23,68 19,90<br />
from 5m²<br />
22,49 18,90<br />
from 10m²<br />
20,83 17,50<br />
from 25m²<br />
18,92 15,90<br />
from 63,5m²<br />
17,73 14,90<br />
Very light and good drapability!<br />
Fields of Application:<br />
Model making, sport equipment,<br />
motor sports, automotive<br />
industry, boat building.<br />
Technical Data<br />
Weight<br />
100 g/m²<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 97g/m², laminate thickness: 0,1mm, laminate weight: 197g/m²<br />
Width<br />
127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 50 g/m²<br />
-45° 50 g/m²<br />
Fibre<br />
Suitable for<br />
HT-Fibre / 24K<br />
epoxy resin<br />
Article: HP-B141C*<br />
Technical Data<br />
!<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
24,87 20,90<br />
from 3m²<br />
23,68 19,90<br />
from 5m²<br />
22,49 18,90<br />
from 10m²<br />
20,83 17,50<br />
from 25m²<br />
18,92 15,90<br />
from 63,5m²<br />
17,73 14,90<br />
Very light and good drapability!<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
Weight<br />
Width<br />
140 g/m²<br />
127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 68 g/m²<br />
-45° 68 g/m²<br />
Fibre<br />
Suitable for<br />
HT-Fibre / 24K<br />
epoxy resin<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 136g/m², laminate thickness: 0,2mm, laminate weight: 276g/m²<br />
Article: HP-B200C<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 63,5m²<br />
18,45 15,50<br />
16,54 13,90<br />
15,35 12,90<br />
14,16 11,90<br />
12,97 10,90<br />
11,78 9,90<br />
Very light and good drapability!<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction, rotor<br />
blades.<br />
Technical Data<br />
Weight<br />
200 g/m²<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 194g/m², laminate thickness: 0,28mm, laminate weight: 394g/m²<br />
Width<br />
127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 100 g/m²<br />
-45° 100 g/m²<br />
Fibre<br />
Suitable for<br />
HT-Fibre / 50K<br />
epoxy resin<br />
Carbon<br />
Article: HP-B200C12K<br />
Price €/m² incl. VAT net<br />
from 1m² 24,87 20,90<br />
from 3m² 23,68 19,90<br />
from 5m² 22,49 18,90<br />
from 10m² 20,83 17,50<br />
from 25m² 18,92 15,90<br />
from 63,5m² 17,73 14,90<br />
Very smooth and good drapability!<br />
Fields of Application:<br />
Model making, motor sports, sports<br />
equipment, rotor blades, Orthopedic<br />
technology, carbon design<br />
Technical Data<br />
Weight 200 g/m²<br />
Width 127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 100 g/m²<br />
-45° 100 g/m²<br />
Fibre 12K Torayca T700<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 197g/m², laminate thickness: 0,29mm, laminate weight: 400g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 21
Article: HP-B305C<br />
Price €/m² incl. VAT net<br />
from 1m² 21,30 17,90<br />
from 3m² 20,11 16,90<br />
from 5m² 18,92 15,90<br />
from 10m² 17,73 14,90<br />
from 25m² 16,54 13,90<br />
from 63,5m² 15,53 12,90<br />
Very light and good drapability!<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
Technical Data<br />
Weight 300 g/m²<br />
Width 127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 150 g/m²<br />
-45° 150 g/m²<br />
Fibre HT-Fibre / 50K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 290g/m², laminate thickness: 0,42mm, laminate weight: 590g/m²<br />
Article: HP-B415C<br />
Price €/m² incl. VAT net<br />
from 1m² 22,55 18,95<br />
from 3m² 21,30 17,90<br />
from 5m² 20,11 16,90<br />
from 10m² 18,92 15,90<br />
from 25m² 17,73 14,90<br />
from 63,5m² 16,54 13,90<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
Technical Data<br />
Weight 410 g/m²<br />
Width 127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 203 g/m²<br />
-45° 203 g/m²<br />
Fibre HT-Fibre / 50K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 586g/m², laminate thickness: 0,85mm, laminate weight: 1191g/m²<br />
Carbon<br />
Article: HP-B600C<br />
Price €/m² incl. VAT net<br />
from 1m² 31,89 26,80<br />
Technical Data<br />
Weight 600 g/m²<br />
Width 127 cm<br />
from 3m²<br />
30,82 25,90<br />
Bidiagonal +45°/-45°<br />
from 5m²<br />
28,95 24,33<br />
+45° 300 g/m²<br />
from 10m²<br />
from 25m²<br />
from 63,5m²<br />
27,25 22,90<br />
24,87 20,90<br />
23,21 19,50<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
-45° 300 g/m²<br />
Fibre HT-Fibre / 50K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 387g/m², laminate thickness: 0,56mm, laminate weight: 787g/m²<br />
Carbon Fabric Triaxial +45°/-45°/0°<br />
Article: HP-T300C<br />
Price €/m² incl. VAT net<br />
from 1m² 21,30 17,90<br />
from 3m² 20,11 16,90<br />
from 5m² 18,92 15,90<br />
from 10m² 17,73 14,90<br />
from 25m² 16,54 13,90<br />
from 63,5m² 15,35 12,90<br />
Fields of Application:<br />
wind energy, sports equipment making,<br />
ship and boat construction,<br />
motor sports, aircraft construction.<br />
Technical Data<br />
Weight 300 g/m²<br />
Width 127 cm<br />
Triaxial +45°/-45°/0°<br />
+45°/-45° each 100 g/m²<br />
0° 100 g/m²<br />
Fibre HT-Fibre / 50K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 360g/m², laminate thickness: 0,48mm, laminate weight: 660g/m²<br />
22<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: HP-T450C<br />
Price €/m² incl. VAT net<br />
from 1m² 29,63 24,90<br />
from 3m² 27,97 23,50<br />
from 5m² 26,06 21,90<br />
from 10m² 23,56 19,80<br />
from 25m² 22,49 18,90<br />
from 63,5m² 20,83 17,50<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
Technical Data<br />
Weight 450 g/m²<br />
Width 127 cm<br />
Triaxial +45°/-45°/0°<br />
+45°/-45° each 150 g/m²<br />
0° 150 g/m²<br />
Fibre HT-Fibre / 50K<br />
Suitable for epoxy resin<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 436g/m², laminate thickness: 0,63mm, laminate weight: 886g/m²<br />
Carbon Fabric Quadraxial 0°/-45°/90°/+45°<br />
Article: HP-Q305C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 63,5m²<br />
22,<strong>02</strong> 18,50<br />
20,83 17,50<br />
19,64 16,50<br />
18,15 15,25<br />
16,96 14,25<br />
15,71 13,20<br />
Article: HP-Q600C<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
Weight<br />
300 g/m²<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 290g/m², laminate thickness: 0,42mm, laminate weight: 590g/m²<br />
Width<br />
127cm<br />
Quadraxial 0°/-45°/90°/+45°<br />
0°/90° each 75g/m²<br />
+45°/-45° each 75g/m²<br />
Fibre<br />
Suitable for<br />
Technical Data<br />
HT-Fibre / 50K<br />
epoxy- & polyester resin<br />
Carbon<br />
Price €/m² incl. VAT net<br />
from 1m² 33,92 28,50<br />
from 3m² 32,01 26,90<br />
from 5m² 29,63 24,90<br />
from 10m² 28,44 23,90<br />
from 25m² 26,06 21,90<br />
from 63,5m² 24,87 20,90<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
Weight 600 g/m²<br />
Width 127cm<br />
Quadraxial 0°/-45°/90°/+45°<br />
0°/90° each 150g/m²<br />
+45°/-45° each 150g/m²<br />
Fibre HT-Fibre / 50K<br />
Suitable for epoxy- & polyester resin<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 581g/m², laminate thickness: 0,84mm, laminate weight: 1181g/m²<br />
Article: HP-Q810C<br />
Price €/m² incl. VAT net<br />
from 1m² 40,34 33,90<br />
from 3m² 39,15 32,90<br />
from 5m² 37,96 31,90<br />
from 10m² 35,58 29,90<br />
from 25m² 34,39 28,90<br />
from 63,5m² 32,73 27,50<br />
Fields of Application:<br />
Model making, motor sports, boat<br />
construction, sports equipment,<br />
mould and tank construction.<br />
Technical Data<br />
Weight 800 g/m²<br />
Width 127cm<br />
Quadraxial 0°/-45°/90°/+45°<br />
0°/90° each 200g/m²<br />
+45°/-45° each 200g/m²<br />
Fibre HT-Fibre / 50K<br />
Suitable for epoxy- & polyester resin<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 776g/m², laminate thickness: 1,12mm, laminate weight: 1576g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 23
Carbon Fabric Tapes (Thermoset)<br />
Due to the special manner of preparation the unidirectional Carbon-Fabric-Tapes are very hard-wearing and<br />
easy to handle. Shiftings are almost impossible because of the thermosetting. Carbon fibres have a high tensile<br />
strength, a low specific weight, low breaking elongation and a high temperature resistance. They have a higher<br />
strength than most metals and other fibre composites.<br />
The elongation of CRP is elastic, the fatigue resistance and vibration damping is excellent.<br />
Technical Data<br />
Weight 315g/m²<br />
Width 2,5cm, 4cm, 5cm, 10cm<br />
Construction Unidirectional 0°<br />
Fibre HT-Faser / 12K 800tex<br />
Fields of Application:<br />
• Tanks, pipes, hulls<br />
• Model making<br />
• Boat construction<br />
• Sport equipment<br />
• Repairs & reinforcements<br />
Suitable for<br />
epoxy resin<br />
Article: HP-U315C/<strong>02</strong>5<br />
Width: 2,5 cm Lenght: 50 lfm<br />
Article: HP-U315C/040<br />
Width: 4 cm Lenght: 50 lfm<br />
Carbon<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m<br />
from 2 rolls<br />
Basic price/m<br />
from 5 rolls<br />
Basic price/m<br />
52,00<br />
1,04<br />
47,00<br />
0,94<br />
42,00<br />
0,84<br />
43,50<br />
0,87<br />
39,50<br />
0,79<br />
35,50<br />
0,71<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m<br />
from 2 rolls<br />
Basic price/m<br />
from 5 rolls<br />
Basic price/m<br />
82,50<br />
1,65<br />
75,00<br />
1,50<br />
68,00<br />
1,36<br />
69,50<br />
1,39<br />
63,00<br />
1,26<br />
57,00<br />
1,14<br />
from 10 rolls<br />
Basic price/m<br />
37,50 31,50<br />
0,75 0,63<br />
from 10 rolls<br />
Basic price/m<br />
59,50 50,00<br />
1,19 1,00<br />
Article: HP-U315C/050<br />
Width: 5 cm Lenght: 50 lfm<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m<br />
94,00 79,00<br />
1,88 1,58<br />
Article: HP-U315C/100<br />
Width: 10 cm Lenght: 50 lfm<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m<br />
169,00 142,00<br />
3,38 2,84<br />
from 2 rolls<br />
Basic price/m<br />
84,50 71,00<br />
1,69 1,42<br />
from 2 rolls<br />
Basic price/m<br />
160,00 134,50<br />
3,20 2,69<br />
from 5 rolls<br />
Basic price/m<br />
75,00 63,00<br />
1,50 1,26<br />
from 5 rolls<br />
Basic price/m<br />
141,00 118,50<br />
2,82 2,37<br />
from 10 rolls<br />
Basic price/m<br />
68,50 57,50<br />
1,37 1,15<br />
from 10 rolls<br />
Basic price/m<br />
127,00 106,50<br />
2,54 2,13<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 378g/m², laminate thickness: 0,51mm, laminate weight: 693g/m²<br />
24<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon Standard Tapes<br />
Our Fabric-Tapes are manufactured on high-performance ribbon looms up to a width of 100mm. Other weights,<br />
constructions or other widths are available by request.<br />
Fields of application:<br />
• Tanks, pipes, hulls<br />
• Model making<br />
• Boat construction<br />
• Sport equipment<br />
• Repairs & reinforcements<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
CONSTRUCTION<br />
THREADS/cm<br />
Warp / Weft<br />
YARN TYPE<br />
Warp Tex<br />
YARN TYPE<br />
Weft Tex<br />
25 HP-U125C/<strong>02</strong>5 125 0° 5,0 / 3,5x2 3K-200 EC9-34 25<br />
25 HP-U125C/050 125 0° 5,0 / 3,5x2 3K-200 EC9-34 50<br />
26 HP-U175C/<strong>02</strong>5 175 0° 7,0 / 4x2 3K-200 EC9-34 25<br />
26 HP-U175C/050 175 0° 7,0 / 4x2 3K-200 EC9-34 50<br />
26 HP-U175C/100 175 0° 7,0 / 4x2 3K-200 EC9-34 100<br />
26 HP-U225C/<strong>02</strong>5 225 0° 5,0 / 3,5x2 6K-400 EC9-34 25<br />
26 HP-U225C/050 225 0° 5,0 / 3,5x2 6K-400 EC9-34 50<br />
26 HP-U225C/100 225 0° 5,0 / 3,5x2 6K-400 EC9-34 100<br />
27 HP-U340C/<strong>02</strong>5 340 0° 4,2 / 1,6 12K-800 EC9-34 25<br />
27 HP-U340C/040 340 0° 4,2 / 1,6 12K-800 EC9-34 40<br />
27 HP-U340C/050 340 0° 4,2 / 1,6 12K-800 EC9-34 50<br />
27 HP-U340C/100 340 0° 4,2 / 1,6 12K-800 EC9-34 100<br />
27 HP-U525C/<strong>02</strong>5 525 0° 6,2 / 4x2 12K-800 EC9-68 25<br />
27 HP-U525C/050 525 0° 6,2 / 4x2 12K-800 EC9-68 50<br />
27 HP-U525C/100 525 0° 6,2 / 4x2 12K-800 EC9-68 100<br />
28 HP-P2<strong>02</strong>C/050 205 Plain<br />
5,0 / 5,0 3K-200 3K-200 50<br />
WIDTH<br />
mm<br />
28 HP-P2<strong>02</strong>C/100 205 Plain<br />
5,0 / 5,0 3K-200 3K-200 100<br />
28 HP-P305C/050 305 Plain<br />
3,5 / 2x2 6K-400 6K-400 50<br />
28 HP-P305C/100 305 Plain<br />
3,5 / 2x2 6K-400 6K-400 100<br />
Carbon<br />
Different weights, constructions and widths are available upon request!<br />
Article: HP-U125C/<strong>02</strong>5<br />
125g/m² / 25mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
9,24 7,76<br />
1,85 1,55<br />
Article: HP-U125C/050<br />
125g/m² / 50mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
13,11 11,<strong>02</strong><br />
2,62 2,20<br />
10 m<br />
Basic price/m<br />
13,63 11,46<br />
1,36 1,15<br />
10 m<br />
Basic price/m<br />
20,64 17,35<br />
2,06 1,73<br />
25 m<br />
Basic price/m<br />
26,37 22,16<br />
1,05 0,89<br />
25 m<br />
Basic price/m<br />
42,51 35,72<br />
1,70 1,43<br />
50 m<br />
Basic price/m<br />
46,69 39,24<br />
0,93 0,78<br />
50 m<br />
Basic price/m<br />
77,13 64,81<br />
1,54 1,30<br />
100 m<br />
Basic price/m<br />
76,76 64,50<br />
0,77 0,65<br />
100 m<br />
Basic price/m<br />
132,09 111,00<br />
1,32 1,11<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 25
Carbon Standard Tapes 175g/m² Unidirectional<br />
Article: HP-U175C/<strong>02</strong>5<br />
175g/m² / 25mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
9,99 8,39<br />
2,00 1,68<br />
Article: HP-U175C/050<br />
175g/m² / 50mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
14,74 12,38<br />
2,95 2,48<br />
Article: HP-U175C/100<br />
175g/m² / 100mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
23,61 19,84<br />
4,72 3,97<br />
10 m<br />
Basic price/m<br />
14,99 12,60<br />
1,50 1,26<br />
10 m<br />
Basic price/m<br />
23,58 19,82<br />
2,36 1,98<br />
10 m<br />
Basic price/m<br />
39,64 33,31<br />
3,96 3,33<br />
25 m<br />
Basic price/m<br />
29,50 24,79<br />
1,18 0,99<br />
25 m<br />
Basic price/m<br />
49,28 41,41<br />
1,97 1,66<br />
25 m<br />
Basic price/m<br />
86,24 72,47<br />
3,45 2,90<br />
50 m<br />
Basic price/m<br />
52,58 44,19<br />
1,05 0,88<br />
50 m<br />
Basic price/m<br />
89,89 75,54<br />
1,80 1,51<br />
50 m<br />
Basic price/m<br />
159,59 134,11<br />
3,19 2,68<br />
100 m<br />
Basic price/m<br />
87,47 73,50<br />
0,87 0,74<br />
100 m<br />
Basic price/m<br />
155,30 130,50<br />
1,55 1,31<br />
100 m<br />
Basic price/m<br />
282,03 237,00<br />
2,82 2,37<br />
Carbon Standard Tapes 225g/m² Unidirectional<br />
Article: HP-U225C/<strong>02</strong>5<br />
225g/m² / 25mm / 0°<br />
Article: HP-U225C/050<br />
225g/m² / 50mm / 0°<br />
Article: HP-U225C/100<br />
225g/m² / 100mm / 0°<br />
Price €/roll incl. VAT net<br />
Price €/roll incl. VAT net<br />
Price €/roll incl. VAT net<br />
Carbon<br />
5 m<br />
Basic price/m<br />
10 m<br />
Basic price/m<br />
25 m<br />
Basic price/m<br />
10,86 9,13<br />
2,17 1,83<br />
16,57 13,93<br />
1,66 1,39<br />
33,14 27,85<br />
1,33 1,11<br />
5 m<br />
Basic price/m<br />
10 m<br />
Basic price/m<br />
25 m<br />
Basic price/m<br />
16,36 13,75<br />
3,27 2,75<br />
26,52 22,29<br />
2,65 2,23<br />
56,05 47,10<br />
2,24 1,88<br />
5 m<br />
Basic price/m<br />
10 m<br />
Basic price/m<br />
25 m<br />
Basic price/m<br />
26,98 22,67<br />
5,40 4,53<br />
45,74 38,44<br />
4,57 3,84<br />
100,30 84,29<br />
4,01 3,37<br />
50 m<br />
Basic price/m<br />
59,45 49,96<br />
1,19 1,00<br />
50 m<br />
Basic price/m<br />
1<strong>02</strong>,65 86,26<br />
2,05 1,73<br />
50 m<br />
Basic price/m<br />
186,10 156,39<br />
3,72 3,13<br />
100 m<br />
Basic price/m<br />
99,96 84,00<br />
1,00 0,84<br />
100 m<br />
Basic price/m<br />
178,50 150,00<br />
1,79 1,50<br />
100 m<br />
Basic price/m<br />
330,23 277,50<br />
3,30 2,78<br />
26<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon Standard Tapes<br />
340g/m² Unidirectional<br />
Article: HP-U340C/<strong>02</strong>5<br />
340g/m² / 25mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
10,23 8,59<br />
2,05 1,72<br />
Article: HP-U340C/040<br />
340g/m² / 40mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
12,91 10,85<br />
2,58 2,17<br />
Article: HP-U340C/050<br />
340g/m² / 50mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
14,83 12,46<br />
2,97 2,49<br />
10 m<br />
Basic price/m<br />
16,17 13,59<br />
1,62 1,36<br />
10 m<br />
Basic price/m<br />
21,30 17,90<br />
2,13 1,79<br />
10 m<br />
Basic price/m<br />
24,96 20,97<br />
2,50 2,10<br />
25 m<br />
Basic price/m<br />
32,87 27,62<br />
1,31 1,10<br />
25 m<br />
Basic price/m<br />
45,05 37,86<br />
1,80 1,51<br />
25 m<br />
Basic price/m<br />
53,75 45,17<br />
2,15 1,81<br />
50 m<br />
Basic price/m<br />
54,18 45,53<br />
1,08 0,91<br />
50 m<br />
Basic price/m<br />
75,42 63,38<br />
1,51 1,27<br />
50 m<br />
Basic price/m<br />
90,59 76,13<br />
1,81 1,52<br />
100 m<br />
Basic price/m<br />
93,30 78,40<br />
0,93 0,78<br />
100 m<br />
Basic price/m<br />
133,28 112,00<br />
1,33 1,12<br />
100 m<br />
Basic price/m<br />
161,84 136,00<br />
1,62 1,36<br />
Article: HP-U340C/100<br />
340g/m² / 100mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
23,79 19,99<br />
4,76 4,00<br />
10 m<br />
Basic price/m<br />
25 m<br />
Basic price/m<br />
50 m<br />
Basic price/m<br />
42,03 35,32<br />
4,20 3,53<br />
94,36 79,29<br />
3,77 3,17<br />
161,39 135,63<br />
3,23 2,71<br />
Carbon<br />
100 m<br />
Basic price/m<br />
295,12 248,00<br />
2,95 2,48<br />
Carbon Standard Tapes<br />
525g/m² Unidirectional<br />
Article: HP-U525C/<strong>02</strong>5<br />
525g/m² / 25mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
11,49 9,65<br />
2,30 1,93<br />
Article: HP-U525C/050<br />
525g/m² / 50mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
17,36 14,59<br />
3,47 2,92<br />
Article: HP-U525C/100<br />
525g/m² / 100mm / 0°<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
28,61 24,04<br />
5,72 4,81<br />
10 m<br />
Basic price/m<br />
17,70 14,88<br />
1,77 1,49<br />
10 m<br />
Basic price/m<br />
28,33 23,81<br />
2,83 2,38<br />
10 m<br />
Basic price/m<br />
48,68 40,91<br />
4,87 4,09<br />
25 m<br />
Basic price/m<br />
35,74 30,04<br />
1,43 1,20<br />
25 m<br />
Basic price/m<br />
60,21 50,60<br />
2,41 2,<strong>02</strong><br />
25 m<br />
Basic price/m<br />
107,07 89,97<br />
4,28 3,60<br />
50 m<br />
Basic price/m<br />
64,36 54,09<br />
1,29 1,08<br />
50 m<br />
Basic price/m<br />
110,51 92,86<br />
2,21 1,86<br />
50 m<br />
Basic price/m<br />
198,86 167,11<br />
3,98 3,34<br />
100 m<br />
Basic price/m<br />
108,89 91,50<br />
1,09 0,92<br />
100 m<br />
Basic price/m<br />
192,78 162,00<br />
1,93 1,62<br />
100 m<br />
Basic price/m<br />
353,43 297,00<br />
3,53 2,97<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 27
Carbon Standard Tapes 205g/m² Plain<br />
Article: HP-P2<strong>02</strong>C/050<br />
205g/m² / 50mm / Plain<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
18,11 15,22<br />
3,62 3,04<br />
Article: HP-P2<strong>02</strong>C/100<br />
205g/m² / 100mm / Leinwand<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
29,60 24,88<br />
5,92 4,98<br />
10 m<br />
Basic price/m<br />
29,69 24,95<br />
2,97 2,49<br />
10 m<br />
Basic price/m<br />
50,49 42,43<br />
5,05 4,24<br />
25 m<br />
Basic price/m<br />
63,34 53,22<br />
2,53 2,13<br />
25 m<br />
Basic price/m<br />
111,23 93,47<br />
4,45 3,74<br />
50 m<br />
Basic price/m<br />
116,40 97,81<br />
2,33 1,96<br />
50 m<br />
Basic price/m<br />
206,72 173,71<br />
4,13 3,47<br />
100 m<br />
Basic price/m<br />
203,49 171,00<br />
2,03 1,71<br />
100 m<br />
Basic price/m<br />
367,71 309,00<br />
3,68 3,09<br />
Carbon Standard Tapes 205g/m² Plain<br />
Article: HP-P305C/050<br />
305g/m² / 50mm / Plain<br />
Article: HP-P305C/100<br />
305g/m² / 100mm / Leinwand<br />
Carbon<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
10 m<br />
Basic price/m<br />
21,11<br />
4,22<br />
35,11<br />
3,51<br />
17,74<br />
3,55<br />
29,51<br />
2,95<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
10 m<br />
Basic price/m<br />
35,23<br />
7,05<br />
60,66<br />
6,07<br />
29,60<br />
5,92<br />
50,98<br />
5,10<br />
25 m<br />
Basic price/m<br />
75,83 63,72<br />
3,03 2,55<br />
25 m<br />
Basic price/m<br />
134,66 113,16<br />
5,39 4,53<br />
50 m<br />
Basic price/m<br />
139,96 117,61<br />
2,80 2,35<br />
50 m<br />
Basic price/m<br />
250,90 210,84<br />
5,<strong>02</strong> 4,22<br />
100 m<br />
Basic price/m<br />
246,33 207,00<br />
2,46 2,07<br />
100 m<br />
Basic price/m<br />
448,04 376,50<br />
4,48 3,77<br />
28<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon Fibre Flat Braid<br />
Carbon braided tapes are an excellent alternative to conventional carbon fiber tapes. Due to the special braiding<br />
technique, the application width is variable. By stretching or compressing the width can be changed. Ideally, the<br />
fiber angle should be between 30° and 60°. Optimal torsion and shear strengths without complex cutting are<br />
therefore possible.<br />
The carbon fibre sleeves are well suitable for applications with epoxy or polyester resins. You can find more<br />
detailed information on our product data sheet.<br />
Our carbon braided tapes are always offered and sold in stretched condition, since it is technically not possible<br />
to wrap the tapes with a fiber angle of 45°.<br />
Please note that the length changes depending on the fibre angle.<br />
ARTICLE<br />
MATERIAL<br />
HT-Fibre<br />
NUMBER OF<br />
ENDS<br />
WIDTH AT 45°<br />
mm<br />
AREA OF APPLICATION<br />
mm<br />
HP-BFC035/65/1 1K 67tex 65 35 15 - 45<br />
HP-BFC063/65/3 3K 200tex 65 63 30 - 80<br />
Article: HP-BFC035/65/1 Article: HP-BFC063/65/3<br />
Price €/roll incl. VAT net<br />
5 m 31,86 26,75<br />
Basic price/m 6,37 5,36<br />
Price €/roll incl. VAT net<br />
5 m 27,38 23,00<br />
Basic price/m 5,48 4,60<br />
10 m<br />
Basic price/m<br />
54,60 45,90<br />
5,46 4,59<br />
10 m<br />
Basic price/m<br />
46,20 38,80<br />
4,62 3,88<br />
25 m<br />
Basic price/m<br />
50 m<br />
Basic price/m<br />
100 m<br />
Basic price/m<br />
118,79 99,75<br />
4,75 3,99<br />
225,98 190,00<br />
4,52 3,80<br />
435,24 366,00<br />
4,35 3,66<br />
25 m<br />
Basic price/m<br />
50 m<br />
Basic price/m<br />
100 m<br />
Basic price/m<br />
1<strong>02</strong>,31 86,00<br />
4,09 3,44<br />
187,53 157,50<br />
3,75 3,15<br />
356,36 299,00<br />
3,56 2,99<br />
Carbon<br />
INSTRUCTIONS: MOLD CONSTRUCTION<br />
On our website (Video & Download Portal) you can find various work instructions and tutorials for free around<br />
the theme of “Mold Construction”.<br />
Please use the QR-Code to get to the instruction or visit<br />
our website www.hp-textiles.com (category “Downloads”).<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 29
Carbon Braided Sleeve<br />
Carbon braided sleeves are ideal for the production of tubes and also for prostheses in orthopedic technology.<br />
Another major area of application is spar- or hollow structures in vehicles, sports equipment and boat building.<br />
The carbon fibre sleeves are well suitable for applications with epoxy or polyester resins.<br />
The diameter of the braided sleeves can be varied by stretching. Ideally, the fiber angle should be between 30°<br />
and 60°. Optimal torsion and shear strengths are achieved at an angle of 45°. You can find more detailed information<br />
on our product data sheet.<br />
Our carbon braided sleeves are always offered and sold in stretched condition, since it is technically not<br />
possible to wrap the hoses with a fiber angle of 45°.<br />
As a guideline, a length change of approx. 20-30% is possible.<br />
Example: straight carbon sleeve approx. 100m / at 45° length of approx. 75m<br />
ARTICLE<br />
MATERIAL<br />
HT-Fibre<br />
NUMBER OF<br />
ENDS<br />
DIAMETER AT 45°<br />
mm<br />
AREA OF APPLICATION<br />
ø mm<br />
HP-BSC009/40/1 1K 67tex 40 9,5 4 - 13<br />
HP-BSC018/32/6 6K 400tex 32 18 7 - 24<br />
HP-BSC035/96/3 3K 200tex 96 35 15 - 45<br />
HP-BSC062/144/3 3K 200tex 144 62 25 - 85<br />
HP-BSC156/144/12 12K 800tex 144 156 50 - 200<br />
Article: HP-BSC009/40/1<br />
Article: HP-BSC018/32/6<br />
Carbon<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
10 m<br />
Basic price/m<br />
24,40<br />
4,88<br />
38,50<br />
3,85<br />
20,50<br />
4,10<br />
32,35<br />
3,24<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
10 m<br />
Basic price/m<br />
21,75<br />
4,35<br />
33,70<br />
3,37<br />
18,30<br />
3,66<br />
28,30<br />
2,83<br />
25 m<br />
Basic price/m<br />
81,89 68,82<br />
3,28 2,75<br />
25 m<br />
Basic price/m<br />
71,00 59,50<br />
2,84 2,38<br />
50 m<br />
Basic price/m<br />
143,96 120,97<br />
2,88 2,42<br />
50 m<br />
Basic price/m<br />
124,00 104,00<br />
2,48 2,08<br />
100 m<br />
Basic price/m<br />
257,62 216,49<br />
2,58 2,16<br />
100 m<br />
Basic price/m<br />
221,00 186,00<br />
2,21 1,86<br />
Article: HP-BSC035/96/3 Article: HP-BSC62/144/3<br />
Article: HP-BSC156/144/12<br />
Price €/roll incl. VAT net<br />
5 m 35,62 29,93<br />
Basic price/m 7,12 5,99<br />
Price €/roll incl. VAT net<br />
5 m 44,55 37,44<br />
Basic price/m 8,91 7,49<br />
Price €/roll incl. VAT net<br />
5 m 1<strong>02</strong>,98 86,54<br />
Basic price/m 20,60 17,31<br />
10 m<br />
Basic price/m<br />
58,81 49,42<br />
5,88 4,94<br />
10 m<br />
Basic price/m<br />
79,06 66,44<br />
7,91 6,64<br />
10 m<br />
Basic price/m<br />
189,28 159,06<br />
18,93 15,91<br />
25 m<br />
Basic price/m<br />
128,65 108,11<br />
5,15 4,32<br />
25 m<br />
Basic price/m<br />
179,89 151,17<br />
7,20 6,05<br />
25 m<br />
Basic price/m<br />
452,68 380,40<br />
18,11 15,22<br />
50 m<br />
Basic price/m<br />
229,53 192,88<br />
4,59 3,86<br />
50 m<br />
Basic price/m<br />
333,30 280,08<br />
6,67 5,60<br />
50 m<br />
Basic price/m<br />
843,41 708,75<br />
16,87 14,18<br />
100 m<br />
Basic price/m<br />
412,57 346,70<br />
4,13 3,47<br />
100 m<br />
Basic price/m<br />
599,40 503,70<br />
5,99 5,04<br />
100 m<br />
Basic price/m<br />
1.627,15 1.367,35<br />
16,27 13,67<br />
30<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon-Design-Fabric -with UV-resistant matrix-<br />
Pure Carbon, soft as leather with a high abrasion resistance.<br />
Our impregnated Carbon Fabric lines characterize the special and high quality carbon fabrics with original and<br />
unique finishing developed by R&D team, offering a particularly pleasant look and a soft touch and granting high<br />
resistance to flexibility and abrasion test. It is furthermore intended for the new concept applications in the world<br />
of fashion, in the interior design, in the automotive and in the marine for high level internal parts and it is receiving<br />
great interest and appreciation from the customers for it‘ quality and it‘s originality.<br />
Article: HP-T281CT<br />
mat<br />
width: 100cm<br />
Article: HP-T282CT<br />
glossy<br />
width: 100cm<br />
Technical Data<br />
Fabric weight<br />
285 g/m²<br />
Total weight<br />
600 g/m²<br />
Width<br />
100 cm<br />
Construction Twill 2/2<br />
Warp 7 Fd./cm<br />
Weft 7 Fd./cm<br />
Price €/m² incl. VAT net total price<br />
from 0,25m²<br />
from 0,5m²<br />
133,88<br />
129,59<br />
112,50<br />
108,90<br />
33,47<br />
64,80<br />
from 1m² 125,96 105,85 125,96<br />
from 2m² 121,98 1<strong>02</strong>,50 243,95<br />
from 3m² 117,81 99,00 353,43<br />
from 5m² 112,93 94,90 564,66<br />
from 10m² 109,36 on request 91,90 1093,61<br />
Carbon-Design-Fabric<br />
Design<br />
Abrasion<br />
resistance<br />
mat or glossy<br />
> 50.000 cycles<br />
Processing:<br />
The HP-T281CT can be processed in a similar way<br />
to leather.<br />
It can easily be placed around curves or tight radii<br />
without breaking.<br />
You can cut it with our scissors HP-L1054 or HP-<br />
L1055 without fraying.<br />
In the further process it can be stitched or glued.<br />
Carbon<br />
Our design fabrics have been specially developed for design applications to create unique, refined and particularly<br />
fascinating surface coatings. Due to the twill weave they are good drapable and smooth. Therefore, it is suitable<br />
for flat components, roundings and complex geometries.<br />
Article: HP-T405CER<br />
red magic carbon width: 100cm<br />
Article: HP-T405CEB<br />
blue magic carbon width: 125cm<br />
Technical Data<br />
Weight approx. 405 g/m²<br />
Width 100 / 125 cm<br />
Construction Twill 6/6<br />
Warp 6 Fd./cm<br />
Weft 18 Fd./cm<br />
Design<br />
red magic carbon<br />
blue magic carbon<br />
Price €/m² incl. VAT net<br />
from 1m² 70,81 59,50<br />
from 3m² 68,90 57,90<br />
from 5m² 65,33 54,90<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
61,76<br />
58,19<br />
55,81<br />
51,90<br />
48,90<br />
46,90<br />
from 100m² on request<br />
Special Features:<br />
A three-dimensional carbon look<br />
paired with noble coloured design.<br />
Due to the tight weaving it is on the<br />
one hand slip-resistant and on the<br />
other hand good drapable and soft<br />
and smooth.<br />
Suitable for<br />
Fields of Application:<br />
epoxy resin<br />
• Design application<br />
• car- & motorcycling components<br />
• skis, kite-, long-, snow- and kickboards<br />
• furniture and furnishing parts<br />
• safety helmets<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 31
Polyester-Design-Fabric<br />
With this „glitter carbon“ you get unique and very fascinating coated surface coatings. Three-dimensional carbon<br />
fibre optics paired with fine coloured design. Depending on the incidence of light, the appearance of the coloured<br />
copper thread changes.<br />
Because of the dense interweaving, it is relatively non-slip but still drapable and cuddly. Thus, it is not only suitable<br />
for flat components, but also for more complex curves and shapes.<br />
Applications:<br />
Whether vehicle parts (interior decoration, hoods, air filter cover), sports equipment (skis, snowboards, bicycle<br />
components), safety helmets, furniture or orthopaedic technology. Through this fabric to create surfaces with a<br />
unique and distinctive look.<br />
Article: HP-T285CCB<br />
blue width: 100cm<br />
Article: HP-T285CCG<br />
gold width: 100cm<br />
Article: HP-T285CCR<br />
red width: 100cm<br />
Article: HP-T285CCB13<br />
pastel blue width: 100cm<br />
Article: HP-T285CCS1<br />
silver width: 100cm<br />
Article: HP-T285CCP7<br />
pink width: 100cm<br />
Carbon<br />
Article: HP-T285CCG19<br />
green width: 100cm<br />
Article: HP-T285CCG35<br />
bright green width: 100cm<br />
Article: HP-T285CCL18<br />
purple width: 100cm<br />
Price €/m² incl. VAT net<br />
from 1m² 44,98 37,80<br />
from 3m² 43,79 36,80<br />
from 5m² 42,60 35,80<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
39,98<br />
37,49<br />
35,58<br />
33,60<br />
31,50<br />
29,90<br />
Note:<br />
We do recommend the following<br />
epoxy resins system to work with<br />
the designed carbon fabric:<br />
HP-E25D, HP-E25DM, HP-E40D<br />
(please have a look at page 123<br />
/ 124)<br />
Technical Data<br />
Weight 285 g/m²<br />
Width 100 cm<br />
Construction Twill 2/2<br />
Warp 7 Fd./cm<br />
3K Carbon 200Tex<br />
Weft 10,5 Fd./cm<br />
3K Carbon 200Tex<br />
0,15 mmCu/Ag<br />
Suitable for<br />
epoxy resin<br />
32<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
3D-Design-Fabric<br />
The 3D-Design-Fabrics are the very latest developed glass fabric, with dyed colours and one sided metallised<br />
glass fabric twill weave. Components which are refined with this 3D-Design fabric, will get a unique 3 dimensional<br />
metallic appearance.<br />
** The 3D-Design-Fabrics are very smooth, has a good drapability and slip-resistance.**<br />
Article: HP-T300EA<br />
Price €/m² incl. VAT net<br />
from 1m² 17,79 14,95<br />
from 5m² 15,89 13,35<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
14,49<br />
12,97<br />
11,29<br />
9,98<br />
12,18<br />
10,90<br />
9,49<br />
8,39<br />
Technical Data<br />
Weight approx. 300 g/m²<br />
Width 100 cm<br />
Construction Twill 2/2<br />
Warp 7 Fd./cm<br />
Weft 7 Fd./cm<br />
Design alustyle<br />
Suitable for epoxy resin<br />
Article: HP-TP200EA<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 18,98 15,95<br />
from 3m² 17,79 14,95<br />
from 5m² 16,96 14,25<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
15,70<br />
13,91<br />
11,89<br />
13,19<br />
11,69<br />
9,99<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Design<br />
200 g/m²<br />
127 cm<br />
Twill / Plain<br />
17,4 Fd./cm<br />
12 Fd./cm<br />
aluminum **rhombus**<br />
Carbon<br />
Suitable for<br />
epoxy resin<br />
Article: HP-TP200ET<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 19,99 16,80<br />
from 3m² 18,74 15,75<br />
from 5m² 17,79 14,95<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
16,41<br />
14,58<br />
12,50<br />
13,79<br />
12,25<br />
10,50<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Design<br />
200 g/m²<br />
127 cm<br />
Twill / Plain<br />
17,4 Fd./cm<br />
12 Fd./cm<br />
titanium **rhombus**<br />
Suitable for<br />
epoxy resin<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 33
OVERVIEW ARAMID FABRIC<br />
Aramid fibres are characterized by a high tenacity, a very good impact strength and abrasion resistance.<br />
Further properties are e.g. a good dampening ability, excellent chemical resistance and non-flammability.<br />
Working with the raw fabric and the laminates is often hard and therefore it is recommended to use special tools.<br />
Aramid<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
WEAVE<br />
STYLE<br />
THREADS/cm<br />
Warp / Weft<br />
YARN TYPE<br />
Warp Tex<br />
YARN TYPE<br />
Weft Tex<br />
THICKNESS<br />
mm<br />
** HP-P36A 36 Plain<br />
8,0 x 8,0 22 22 0,10<br />
35 HP-P60A 61 Plain<br />
13,5 x 13,5 22 22 0,12<br />
** HP-P75A 75 Plain<br />
8,7 x 8,7 42 42 0,15<br />
** HP-T110A 110 Twill 2/2 13,0 x 13,0 42 42 0,20<br />
** HP-P110A 110 Plain<br />
13,4 x 13,4 40,5 40,5 0,18<br />
** HP-P115A 115 Plain<br />
13,4 x 13,4 42 42 0,20<br />
** HP-P120A 120 Plain<br />
8,0 x 6,0 127 22 0,20<br />
** HP-P158A 158 Plain<br />
9,0 x 5,5 158 22 0,28<br />
** HP-M160A 160 Mesh 101 5,0 x 5,0 158 158 0,50<br />
** HP-P160A 160 Plain<br />
5,0 x 5,0 158 158 0,30<br />
** HP-T160A 160 Twill 2/2 5,0 x 5,0 158 158 0,30<br />
** HP-P163A 163 Plain<br />
6,5 x 6,5 126 126 0,29<br />
** HP-T171A 170 Atlas 1/7 19,0 x 19,0 42 42 0,30<br />
35 HP-P170A 170 Plain<br />
5,2 x 5,2 158 158<br />
35 HP-T172A 172 Twill 2/2 5,2 x 5,2 158 158 0,30<br />
** HP-T170A 170 X-Twill 3/1 6,5 x 6,5 127 127 0,32<br />
** HP-T174A 170 Twill 2/2 5,0 x 5,0 168 168 0,35<br />
** HP-T195A 195 Twill 2/2 6,0 x 6,0 158 158 0,35<br />
** HP-T220A 220 X-Twill 3/1 6,7 x 6,7 161 161 0,43<br />
** HP-P230A 230 Plain<br />
7,0 x 7,0 158 158 0,35<br />
** HP-T230A 230 Twill 2/2 7,0 x 7,0 158 158 0,40<br />
** HP-T231A 230 X-Twill 3/1 7,0 x 7,0 158 158 0,45<br />
** HP-M230A 230 Mesh 101 7,0 x 7,0 158 158 0,60<br />
** HP-P285A 285 Plain<br />
10,5 x 10,5 126 126 0,41<br />
** HP-P295A 295 Plain<br />
9,3 x 8,4 158 158 0,47<br />
35 HP-T310A 310 Twill 2/2 4,5 x 4,5 322 322<br />
** HP-S315A 315 Atlas 1/4 6,3 x 6,3 240 240 0,56<br />
** HP-T315A 315 X-Twill 3/1 4,9 x 4,9 316 316 0,60<br />
** HP-S335A 335 Atlas 1/4 6,8 x 6,8 240 240 0,60<br />
** HP-S365A 365 Atlas 1/7 20,5 x 2,3 158 158 0,62<br />
** HP-P470A 470 P 4/4 4-fdg. 10,5 x 8,5 240 240 0,78<br />
** HP-T470A 470 Twill 2/2 8,0 x 6,5 316 316 0,81<br />
** HP-P556A 556 Panama 4/4 8,0 x 8,0 330 330 0,90<br />
** These articles, as well as different weights, constructions and widths are available upon request!<br />
34<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Aramid Fabrics<br />
Article: HP-P60A<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 32,73 27,50<br />
Weight<br />
Width<br />
61 g/m²<br />
127 cm<br />
from 3m²<br />
31,54 26,50<br />
Construction<br />
Plain<br />
from 5m²<br />
28,92 24,30<br />
Warp<br />
13,5 y./cm<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
26,54 22,30<br />
24,87 20,90<br />
23,68 19,90<br />
on request<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
aircraft construction, sports<br />
equipment, high-strength coating.<br />
Weft<br />
Fibre<br />
Suitable for<br />
13,5 y./cm<br />
Aramid 22tex<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 86g/m², laminate thickness: 0,12mm, laminate weight: 147g/m²<br />
Article: HP-T172A<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 23,68 19,90<br />
Weight<br />
Width<br />
170 g/m²<br />
100 cm<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
21,99 18,48<br />
19,99 16,80<br />
18,45 15,50<br />
16,54 13,90<br />
15,35 12,90<br />
13,98 11,75<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
aircraft construction, sports<br />
equipment, high-strength coating.<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Suitable for<br />
Twill<br />
5,2 y./cm<br />
5,2 y./cm<br />
Aramid 158tex<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,34mm, laminate weight: 410g/m²<br />
Article: HP-P170A<br />
Technical Data<br />
Aramid<br />
Price €/m² incl. VAT net<br />
from 1m² 23,68 19,90<br />
Weight<br />
Width<br />
170 g/m²<br />
100 cm<br />
from 3m²<br />
21,99 18,48<br />
Construction<br />
Plain<br />
from 5m²<br />
19,99 16,80<br />
Warp<br />
6,7 y./cm<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
18,45 15,50<br />
16,54 13,90<br />
15,35 12,90<br />
13,98 11,75<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
aircraft construction, sports<br />
equipment, high-strength coating.<br />
Weft<br />
Fibre<br />
Suitable for<br />
6,7 y./cm<br />
Aramid 121tex<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,34mm, laminate weight: 410g/m²<br />
Article: HP-T310A<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 31,90 26,81<br />
Weight<br />
Width<br />
310 g/m²<br />
100 cm<br />
from 3m²<br />
29,90 25,13<br />
Construction<br />
Twill<br />
from 5m²<br />
27,95 23,49<br />
Warp<br />
4,5 y./cm<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
25,95 21,81<br />
24,50 20,59<br />
22,90 19,24<br />
21,90 18,40<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
aircraft construction, sports<br />
equipment, high-strength coating.<br />
Weft<br />
Fibre<br />
Suitable for<br />
4,5 y./cm<br />
Aramid 322tex<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 456g/m², laminate thickness: 0,61mm, laminate weight: 767g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 35
Aramid Tapes<br />
Our Fabric-Tapes are manufactured on high-performance ribbon looms up to a<br />
width of 100mm. Other weights, constructions or other widths are available by<br />
request.<br />
ARTICLE<br />
WEIGHT<br />
g/m²<br />
CONSTRUCTION MATERIAL THREADS/cm<br />
Warp / Weft<br />
WIDTH<br />
cm<br />
LENGTH<br />
m<br />
HP-P171A/<strong>02</strong>5 170 Plain Aramid 121tex 7 / 3,5x2 2,5 100<br />
HP-P171A/050 170 Plain Aramid 121tex 7 / 3,5x2 5 100<br />
HP-P171A/100 170 Plain Aramid 121tex 7 / 3,5x2 10 100<br />
Article: HP-P171A/<strong>02</strong>5 Article: HP-P171A/050 Article: HP-P171A/100<br />
Price €/roll incl. VAT net<br />
5 m 9,99 8,39<br />
Basic price/m 2,00 1,68<br />
Price €/roll incl. VAT net<br />
5 m 14,36 12,07<br />
Basic price/m 2,87 2,41<br />
Price €/roll incl. VAT net<br />
5 m 22,61 19,00<br />
Basic price/m 4,52 3,80<br />
10 m<br />
Basic price/m<br />
14,99 12,60<br />
1,50 1,26<br />
10 m<br />
Basic price/m<br />
22,90 19,25<br />
2,29 1,92<br />
10 m<br />
Basic price/m<br />
37,83 31,79<br />
3,78 3,18<br />
25 m<br />
Basic price/m<br />
29,50 24,79<br />
1,18 0,99<br />
25 m<br />
Basic price/m<br />
47,72 40,10<br />
1,91 1,60<br />
25 m<br />
Basic price/m<br />
82,08 68,97<br />
3,28 2,76<br />
50 m<br />
Basic price/m<br />
52,58 44,19<br />
1,05 0,88<br />
50 m<br />
Basic price/m<br />
86,94 73,06<br />
1,74 1,46<br />
50 m<br />
Basic price/m<br />
151,74 127,51<br />
3,03 2,55<br />
Aramid<br />
100 m<br />
Basic price/m<br />
87,47 73,50<br />
0,87 0,74<br />
100 m<br />
Basic price/m<br />
149,94 126,00<br />
1,50 1,26<br />
100 m<br />
Basic price/m<br />
267,75 225,00<br />
2,68 2,25<br />
Special Offers<br />
Many greatly reduced items can be found in our online store<br />
www.hp-textiles.com/shop under the heading „Special Items“ or follow this QR-Code:<br />
40%<br />
Aramid Fabric<br />
60g/m² Plain<br />
25%<br />
Hybrid Fabric<br />
205g/m² Twill<br />
40% Carbon Fabric 40%<br />
285g/m² Twill 4/4<br />
Glas Fabric<br />
1250g/m² Triaxial<br />
36<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
OVERVIEW HYBRID FABRIC<br />
Hybrid Fabrics combine the good properties of the Carbon Fabrics with the ones of the Aramid Fabrics. Through<br />
the Carbon Fibres the fabric gets a high stiffness and the Aramid Fibres give the fabric a high impact strength,<br />
tensile strength, capacity and wear resistance.<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
WEAVE<br />
STYLE<br />
THREADS/cm<br />
Warp / Weft<br />
YARN TYPE<br />
Warp Tex<br />
** HP-P71AC 71 Plain 6,5 x 6,5 1K Carbon - 67<br />
Kevlar 49 - 42<br />
** HP-P96AC 96 Plain<br />
10 x 10 1K Carbon - 67<br />
Kevlar 49 - 42<br />
38 HP-P163AC 163 Plain 4,4 x 4,4 3K Carbon - 200<br />
Aramid 158<br />
** HP-P165AC 165 Plain 4,6 x 4,6 3K Carbon - 200<br />
Aramid 161<br />
YARN TYPE<br />
Weft Tex<br />
1K Carbon - 67<br />
Kevlar 49 - 42<br />
1K Carbon - 67<br />
Kevlar 49 - 42<br />
3K Carbon - 200<br />
Aramid 158<br />
3K Carbon - 200<br />
Aramid 161<br />
THICKNESS<br />
mm<br />
0,14<br />
0,18<br />
0,30<br />
0,30<br />
** HP-P167AC 165 Plain 4,0 x 5,0 3K Carbon - 200 Aramid 158 0,35<br />
38 HP-P180AC 180 Plain 5,0 x 5,0 3K Carbon - 200<br />
Kevlar 49 - 132<br />
38 HP-T205AC 205 Twill 2/2 6,0 x 6,0 3K Carbon - 200<br />
Kevlar 49 - 132<br />
3K Carbon - 200<br />
Kevlar 49 - 132<br />
3K Carbon - 200<br />
Kevlar 49 - 132<br />
0,31<br />
0,35<br />
** HP-T207AC 205 Twill 2/2 5,0 x 6,0 3K Carbon - 200 Aramid 158 0,35<br />
** HP-T210AC 210 Twill 3/1 6,5 x 6,0 3K Carbon - 200 3K Carbon - 200 0,37<br />
Kevlar 49 - 127 Kevlar 49 - 127<br />
Hybrid<br />
** HP-T240AC 240 Twill 2/2 6,7 x 6,7 3K Carbon - 200<br />
Kevlar 49 - 158<br />
** HP-T600AC 600 Twill 2/2 6,6 x 6,6 12K Carbon - 800<br />
Kevlar 49 - 316<br />
3K Carbon - 200<br />
Kevlar 49 - 158<br />
12K Carbon - 800<br />
Kevlar 49 - 316<br />
0,40<br />
0,90<br />
** These articles, as well as different weights, constructions and widths are available upon request!<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 37
Hybrid Fabrics<br />
Article: HP-P163AC<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 22,98 19,31<br />
Weight<br />
Width<br />
163 g/m²<br />
100 cm<br />
from 3m²<br />
20,98 17,63<br />
Construction<br />
Plain<br />
from 5m²<br />
18,98 15,95<br />
Warp<br />
4,4 y./cm<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
17,98 15,11<br />
16,98 14,27<br />
15,95 13,40<br />
14,95 12,56<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction.<br />
Weft<br />
Fibre<br />
4,4 y./cm<br />
Carbon 3K 200tex<br />
Aramid 158tex<br />
Suitable for<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 210g/m², laminate thickness: 0,29mm, laminate weight: 375g/m²<br />
Article: HP-P180AC<br />
Technical Data<br />
Hybrid<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
24,98 20,99<br />
22,98 19,31<br />
20,90 17,56<br />
19,90 16,72<br />
18,90 15,88<br />
17,79 14,95<br />
16,49 13,86<br />
Fields of Application:<br />
Sandwich construction, model<br />
making, aircraft construction, sports<br />
equipment, high-strength coating.<br />
Weight<br />
180 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 230g/m², laminate thickness: 0,32mm, laminate weight: 410g/m²<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Suitable for<br />
100 cm<br />
Plain<br />
4,9 y./cm<br />
4,9 y./cm<br />
HT-Fibre / 3K 200tex<br />
Aramid 158tex<br />
epoxy resin<br />
Article: HP-T205AC<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 27,25 22,90<br />
Weight<br />
Width<br />
205 g/m²<br />
100/120 cm<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
25,49 21,42<br />
22,98 19,31<br />
21,85 18,36<br />
19,99 16,80<br />
18,99 15,96<br />
17,98 15,11<br />
Fields of Application:<br />
Sandwich construction, model<br />
making, aircraft construction, sports<br />
equipment, high-strength coating.<br />
Construction<br />
Warp<br />
Weft<br />
Fibre<br />
Twill<br />
5,5 y./cm<br />
5,5 y./cm<br />
HT-Fibre / 3K 200tex<br />
Aramid 158tex<br />
Suitable for<br />
epoxy resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 260g/m², laminate thickness: 0,36mm, laminate weight: 465g/m²<br />
38<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
OVERVIEW GLASS FILAMENT FABRIC<br />
Glass-Filament-Fabrics are weaved panels consisting of endless E-Glass-Yarn. The glass yarn is a spinning<br />
thread which is provided with a slight turning (approx. 20 - 40 turnings per meter). Glass fibre threads consist of<br />
several glass yarns which are twisted together.<br />
The properties of textile glass materials as reinforcing materials are determined by the fineness and sizing of the<br />
spinning thread. The sizing of the thread is a thin coating based on chrome or silane compounds. It is applied with<br />
an application roll while the pulling process.<br />
The mechanical basic features (e.g. tensile strength, tensile moduls of elasticity, elongation at break) are determined<br />
by the glass type, the application and the sizing of the thread. These include smoothness and sliding ability<br />
while processing with the textiles, the compatibility of the glass surfaces and the resin matrix and hereby the<br />
implementation of the mechanical basic features onto the composite material.<br />
E-Glass Description<br />
Glasstype<br />
Density<br />
kg/dm³<br />
Softening<br />
temperature °C<br />
Tensilstrength<br />
MPA<br />
Elasticity<br />
modul GPa<br />
Elongation<br />
%<br />
Thermal conductivity<br />
W(m.K)<br />
E-Glas 2,59 - 2,62 825 - 860 2600 73 3,5 - 4 0,15<br />
Comparison: Silane / Finish<br />
SILANE<br />
FINISH<br />
PREPARATION The sizing is applied during the<br />
production of the yarn on the basis<br />
of a universal Silane bonding agent.<br />
Silane fabrics need no further treatment and<br />
are directly applicable in the fibre composite.<br />
The fabric is first prepared from a textile fibre- glass.<br />
Thereafter, the textile glass sizing is burned.<br />
And then a special bonding agent,<br />
the so-called finish is applied.<br />
The finish consists of a bifunctional chemical<br />
compound. This compound optimized<br />
on the one hand the binding to the<br />
resin and on the other hand to the fibre.<br />
Glass<br />
PROPERTIES • Good mechanical properties in the<br />
laminate<br />
• Transparent laminates<br />
• Low Fibre Print<br />
• Very cheap<br />
• Suitable for EP and UP resin<br />
APPLICATIONS • boat building<br />
• Good impregnation of the fibre<br />
• sport equipments<br />
• vehicle industrie<br />
• model and mould components<br />
• Very good mechanical properties in the<br />
laminate<br />
• Very transparent laminates<br />
• Low Fibre Print<br />
• Very high-quality<br />
• Very suitable for EP and UP resin<br />
• Outstanding impregnation of the fibre<br />
• Very low dust during cutting<br />
• For the first layer(s) after the mold cover<br />
layer, since they not stand out from<br />
the surface.<br />
• boat building<br />
• sport equipments<br />
• vehicle industrie<br />
• model and mould components<br />
• wood and venner coatings<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 39
OVERVIEW GLASS FILAMENT FABRIC - SILANE<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
WEAVE<br />
STYLE<br />
THREADS/cm<br />
Warp / Weft<br />
YARN TYPE<br />
Warp Tex<br />
YARN TYPE<br />
Weft Tex<br />
WIDTH<br />
cm<br />
41 HP-P80E 86 Plain<br />
12 x 11,5 EC6-34 EC6-34 100<br />
41 HP-T80E 86 Twill 2/2 12 x 11,5 EC6-34 EC6-34 100<br />
41 HP-P110E 105 Plain<br />
16 x 15 EC6-34 EC6-34 100<br />
41 HP-T110E 105 Twill 2/2<br />
16 x 15 EC6-34 EC6-34 100<br />
42 HP-P163E 166 Plain<br />
12 x 11,5 EC9-68 EC9-68 100<br />
42 HP-T163E 166 Twill 2/2 12 x 11,5 EC9-68 EC9-68 100<br />
42 HP-T211E 213 Twill 2/2<br />
19 x 12 EC9-68 EC9-68 120<br />
42 HP-P221E 220 Plain<br />
8 x 5,4 EC9-136 EC16-200 100<br />
43 HP-P275E 275 Plain<br />
8 x 5,6 EC9-136 EC13-300 100<br />
43 HP-T275E 275 Twill 2/2<br />
8 x 5,6 EC9-136 EC13-300 100<br />
43 HP-P385E 385 Plain<br />
7,4 x 5,4 EC13-300 EC13-300 100<br />
43 HP-T385E 385 Twill 2/2 7,4 x 5,4 EC13-300 EC13-300 100<br />
** HP-S660E 660 Satin 8/3 16,0 x 16,0 EC9-68 EC9-68 100<br />
OVERVIEW GLASS FILAMENT FABRIC - FINISH -<br />
Glass<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
WEAVE STY-<br />
LE<br />
THREADS/cm<br />
Warp / Weft<br />
YARN TYPE<br />
Warp Tex<br />
YARN TYPE<br />
Weft Tex<br />
WIDTH<br />
cm<br />
45 HP-P25EF 25 Plain<br />
20 x 19,5 EC5-5,5 EC5-5,5 127<br />
45 HP-P49EF 49 Plain<br />
20 x 22 EC5-11 EC5-11 103-127<br />
45 HP-P50EF 49 Plain<br />
23,5 x 18,5 EC5-11 EC5-11 110-127<br />
46 HP-P80EF 81 Plain<br />
12 x 11 EC9-34 EC9-34 100<br />
46 HP-P100/127EF 104 Plain<br />
24 x 23 EC7-22 EC7-22 127<br />
46 HP-T100EF 104 Twill 2/2<br />
24 x 23 EC7-22 EC7-22 110-127<br />
46 HP-P160EF 160 Plain<br />
6 x 5,5 2x EC9-68 EC9-136 100<br />
47 HP-P163EF 160 Plain<br />
11,8 x 12 EC9-68 EC9-68 100<br />
47/50 HP-T163EF 160 Twill 2/2<br />
11,8 x 12 EC9-68 EC9-68 100<br />
47 HP-T194EF 194 Twill 2/2<br />
14 x 14 EC9-68 EC9-68 120<br />
47 HP-P200/127EF 206 Plain<br />
17 x 11,8 EC9-68 EC9-68 127<br />
48 HP-U220EF 220 UD / Plain<br />
6 x 7 5x EC9-68 EC7-22 100<br />
48 HP-P280EF 280 Plain<br />
7 x 7 3x EC9-68 EC11-204 127<br />
48/50 HP-T280EF 280 Twill 2/2<br />
7 x 7 3x EC9-68 EC11-204 100 / 127<br />
48 HP-S300EF 300 8 Satin<br />
22 x 21,4 EC9-68 EC9-68 100-127<br />
** HP-P330EF 330 Plain<br />
6,5 x 6,5 5x EC9-68 3x EC9-68 100<br />
49 HP-P390EF 390 Plain<br />
6 x 6,7 5x EC9-68 EC13-272 100<br />
49/50 HP-T390EF 390 Twill 2/2<br />
6 x 6,7 5x EC9-68 EC13-272 100<br />
** HP-U445EF 440 UD / Plain 28,5 x 6,3 EC9-136 EC9-68 100<br />
49 HP-S440EF 440 8 Satin<br />
6 x 8,5 5x EC9-68 EC13-272 100<br />
49 HP-HD1000EF 1000 HD-Plain<br />
22,4 x 14 2x EC9-136 2x EC9-136 100<br />
** These articles, as well as different weights, constructions and widths are available upon request!<br />
40<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Glass Filament Fabrics -Silane-<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Article: HP-P80E<br />
Plain Width: 100cm<br />
Article: HP-T80E<br />
Twill Width: 100cm<br />
Technical Data<br />
Weight 86 g/m²<br />
Width 100 cm<br />
Construction<br />
Plain / Twill<br />
Warp<br />
12 y./cm<br />
Weft<br />
11,5 y./cm<br />
Sizing<br />
Silane<br />
Price €/m² incl. VAT net<br />
from 1m²* 3,58 3,01<br />
from 5m² 3,35 2,81<br />
from 10m² 3,11 2,61<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
boat construction, thin coatings.<br />
Suitable for<br />
epoxy- & polyester resin<br />
from 25m²<br />
2,63 2,21<br />
from 50m²<br />
2,03 1,71<br />
from 100m²<br />
1,73 1,46<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 71g/m², laminate thickness: 0,09mm, laminate weight: 157g/m²<br />
Article: HP-P110E<br />
Plain Width: 100cm<br />
Article: HP-T110E<br />
Twill Width: 100cm<br />
Technical Data<br />
Weight 105 g/m²<br />
Width<br />
100 cm<br />
Construction<br />
Warp<br />
Plain / Twill<br />
16 y./cm<br />
Glass<br />
Weft<br />
15 y./cm<br />
Sizing<br />
Silane<br />
Price €/m² incl. VAT net<br />
from 1m²* 3,80 3,19<br />
from 5m² 3,55 2,98<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
boat construction, thin coatings.<br />
Suitable for<br />
epoxy- & polyester resin<br />
from 10m²<br />
3,29 2,77<br />
from 25m²<br />
2,79 2,34<br />
from 50m²<br />
2,15 1,81<br />
from 100m²<br />
1,84 1,54<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 86g/m², laminate thickness: 0,12mm, laminate weight: 191g/m²<br />
© Manufaktur MasterArtHelis<br />
www.masterart-helis.de<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 41
Glass Filament Fabrics -Silane-<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Article: HP-P163E<br />
Plain Width: 100cm<br />
Article: HP-T163E<br />
Twill Width: 100cm<br />
Technical Data<br />
Weight 166 g/m²<br />
Width 100 cm<br />
Construction<br />
Plain / Twill<br />
Warp<br />
12 y./cm<br />
Weft<br />
11,5 y./cm<br />
Sizing<br />
Silane<br />
Price €/m² incl. VAT net<br />
from 1m²* 3,80 3,19<br />
from 5m² 3,55 2,98<br />
from 10m² 3,29 2,77<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
thin coatings, boat constructions,<br />
motor sports, mould and tank<br />
construction.<br />
Suitable for<br />
epoxy- & polyester resin<br />
from 25m²<br />
2,79 2,34<br />
from 50m²<br />
2,15 1,81<br />
from 100m²<br />
1,84 1,54<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 136g/m², laminate thickness: 0,18mm, laminate weight: 3<strong>02</strong>g/m²<br />
Article: HP-T211E<br />
Technical Data<br />
Glass<br />
Price €/m² incl. VAT net<br />
from 1m²* 4,50 3,78<br />
from 5m² 4,20 3,53<br />
from 10m² 3,90 3,28<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
213 g/m²<br />
120 cm<br />
Twill<br />
19 y./cm<br />
from 25m²<br />
from 50m²<br />
from 120m²<br />
3,30 2,77<br />
2,55 2,14<br />
2,17 1,83<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
thin coatings, boat constructions,<br />
vehicle parts, mould and tank<br />
construction, sports equipment.<br />
Weft<br />
Sizing<br />
Suitable for<br />
12 y./cm<br />
Silane<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 175g/m², laminate thickness: 0,23mm, laminate weight: 388g/m²<br />
Article: HP-P221E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²* 4,64 3,90<br />
Weight<br />
Width<br />
220 g/m²<br />
100 cm<br />
from 5m²<br />
4,33 3,64<br />
Construction<br />
Plain<br />
from 10m²<br />
4,<strong>02</strong> 3,38<br />
Warp<br />
8 y./cm<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
3,40 2,86<br />
2,63 2,21<br />
2,25 1,89<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
thin coatings, boat constructions,<br />
vehicle parts, mould and tank<br />
construction, sports equipment.<br />
Weft<br />
Sizing<br />
Suitable for<br />
5,4 y./cm<br />
Silane<br />
epoxy- & polyester resin<br />
The yarn type TD37C is used for this fabric. This yarn contains no starch, can be used more universally and is fully<br />
compatible with our resins. It has a higher tensile strength, optimized impregnation properties and thus improved<br />
performance.<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 184g/m², laminate thickness: 0,25mm, laminate weight: 408g/m²<br />
42<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Glass Filament Fabrics -Silane-<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Article: HP-P275E<br />
Plain Width: 100cm<br />
Article: HP-T275E<br />
Twill Width: 100cm<br />
Technical Data<br />
Weight 275 g/m²<br />
Width 100 cm<br />
Construction<br />
Plain / Twill<br />
Warp<br />
8 y./cm<br />
Weft<br />
5,6 y./cm<br />
Sizing<br />
Silane<br />
Price €/m² incl. VAT net<br />
from 1m²* 5,57 4,68<br />
from 5m² 5,20 4,37<br />
from 10m² 4,46 3,74<br />
Fields of Application:<br />
Sports equipment, boat construction,<br />
tank and mould construction,<br />
vehicle parts, model making.<br />
Suitable for<br />
epoxy- & polyester resin<br />
from 25m²<br />
3,71 3,12<br />
from 50m²<br />
3,16 2,65<br />
from 100m²<br />
2,69 2,26<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 514g/m²<br />
Article: HP-P385E<br />
Plain Width: 100cm<br />
Article: HP-T385E<br />
Twill Width: 100cm<br />
Technical Data<br />
Weight 390 g/m²<br />
Width<br />
100 cm<br />
Construction<br />
Warp<br />
Plain / Twill<br />
7,4 y./cm<br />
Glass<br />
Weft<br />
5,4 y./cm<br />
Sizing<br />
Silane<br />
Price €/m² incl. VAT net<br />
from 1m²* 7,35 6,18<br />
from 5m² 6,86 5,77<br />
Fields of Application:<br />
Sports equipment, boat construction,<br />
tank and mould construction,<br />
vehicle parts, model making.<br />
Suitable for<br />
epoxy- & polyester resin<br />
from 10m²<br />
6,37 5,36<br />
from 25m²<br />
5,39 4,53<br />
from 50m²<br />
4,17 3,50<br />
from 100m²<br />
3,55 2,99<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 320g/m², laminate thickness: 0,43mm, laminate weight: 710g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 43
INSTRUCTIONS / VIDEOS BOAT BUILDING<br />
On our website (Video & Download Portal) you can find various work instructions and tutorials for free around<br />
the theme of “Epoxy resins in boat building”. Learn the basics of coating and refurbishment of boats from the<br />
correct selection of materials up to the structure of the coating.<br />
Please use the QR-Code to get to the instruction or visit<br />
our website www.hp-textiles.com (category “Downloads”).<br />
Glass<br />
44<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Glass Filament Fabrics -Finish-<br />
Article: HP-P25EF<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 127m²<br />
3,21 2,70<br />
3,00 2,52<br />
2,78 2,34<br />
2,36 1,98<br />
1,82 1,53<br />
1,56 1,31<br />
Fields of Application:<br />
Boat construction, model making,<br />
tank and mould construction,<br />
vehicle parts, circuit boards,<br />
wing coatings, veneer coatings.<br />
Weight<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 24g/m², laminate thickness: 0,04mm, laminate weight: 49g/m²<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Suitable for<br />
25 g/m²<br />
127 cm<br />
Plain<br />
20 y/cm<br />
19,5 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
Article: HP-P49EF<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 127m²<br />
3,21 2,70<br />
3,00 2,52<br />
2,78 2,34<br />
2,36 1,98<br />
1,82 1,53<br />
1,56 1,31<br />
Fields of Application:<br />
Boat construction, model making,<br />
tank and mould construction,<br />
vehicle parts, circuit boards,<br />
wing coatings, veneer coatings.<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 39g/m², laminate thickness: 0,05mm, laminate weight: 87g/m²<br />
Article: HP-P50EF<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Suitable for<br />
Technical Data<br />
49 g/m²<br />
127 cm<br />
Plain<br />
20 y/cm<br />
22 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
Glass<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 127m²<br />
4,82 4,05<br />
4,50 3,78<br />
4,18 3,51<br />
3,86 3,24<br />
3,38 2,84<br />
2,84 2,39<br />
Fields of Application:<br />
Boat construction, model making,<br />
tank and mould construction,<br />
vehicle parts, circuit boards,<br />
wing coatings, veneer coatings.<br />
Weight<br />
49 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 39g/m², laminate thickness: 0,05mm, laminate weight: 87g/m²<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Suitable for<br />
127 cm<br />
Plain<br />
23,5 y/cm<br />
18,5 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 45
Glass Filament Fabrics -Finish-<br />
Article: HP-P80EF<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²* 4,82 4,05<br />
Weight<br />
Width<br />
81 g/m²<br />
100 cm<br />
from 5m²<br />
4,50 3,78<br />
Construction<br />
Plain<br />
from 10m²<br />
4,18 3,51<br />
Warp<br />
12 y/cm<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
3,86 3,24<br />
3,38 2,84<br />
2,84 2,39<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
thin coatings, GRP-panels.<br />
Weft<br />
Sizing<br />
11 y/cm<br />
Finish<br />
Suitable for<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 67g/m², laminate thickness: 0,09mm, laminate weight: 148g/m²<br />
Article: HP-P100/127EF<br />
Plain Width: 127 cm<br />
Article: HP-T100EF<br />
Twill Width: 127cm<br />
Technical Data<br />
Weight 104 g/m²<br />
Width 127 cm<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Plain / Twill<br />
24 y/cm<br />
23 y/cm<br />
Finish<br />
Glass<br />
Price €/m² incl. VAT net<br />
from 1m²* 4,82 4,05<br />
from 5m² 4,50 3,78<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 127m²<br />
4,18<br />
3,86<br />
3,38<br />
2,73<br />
3,51<br />
3,24<br />
2,84<br />
2,29<br />
Fields of Application:<br />
Sandwich construction, model making,<br />
thin coatings, boat construction<br />
Suitable for<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres:<br />
resin consumption: 85g/m², laminate thickness: 0,11mm, laminate weight: 189g/m²<br />
Article: HP-P160EF<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²* 5,34 4,49<br />
Weight<br />
Width<br />
160 g/m²<br />
100 cm<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
4,75 3,99<br />
4,43 3,72<br />
3,88 3,26<br />
3,44 2,89<br />
2,92 2,45<br />
Fields of Application:<br />
Model making, boat construction,<br />
vehicle parts, hull coatings.<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Plain<br />
6 y/cm<br />
5,5 y/cm<br />
Finish<br />
Suitable for<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 131g/m², laminate thickness: 0,18mm, laminate weight: 291g/m²<br />
46<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Glass Filament Fabrics -Finish-<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Article: HP-P163EF<br />
Plain Width: 100cm<br />
Article: HP-T163EF<br />
Twill Width: 100cm<br />
Technical Data<br />
Weight 163 g/m²<br />
Width 100 cm<br />
Construction<br />
Plain / Twill<br />
Warp<br />
11,8 y/cm<br />
Weft<br />
12 y/cm<br />
Sizing<br />
Finish<br />
Price €/m² incl. VAT net<br />
from 1m²* 5,34 4,49<br />
from 5m² 4,75 3,99<br />
from 10m² 4,43 3,72<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Suitable for<br />
epoxy- & polyester resin<br />
from 25m²<br />
3,88 3,26<br />
from 50m²<br />
3,44 2,89<br />
from 100m²<br />
2,96 2,49<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 136g/m², laminate thickness: 0,18mm, laminate weight: 3<strong>02</strong>g/m²<br />
Article: HP-T194EF<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²* 5,34 4,49<br />
Weight<br />
Width<br />
194 g/m²<br />
127 cm<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 120m²<br />
4,75 3,99<br />
4,43 3,72<br />
3,88 3,26<br />
3,44 2,89<br />
2,96 2,49<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Suitable for<br />
Twill<br />
14 y/cm<br />
14 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
Glass<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 160g/m², laminate thickness: 0,21mm, laminate weight: 354g/m²<br />
Article: HP-P200/127EF<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²* 4,46 3,75<br />
Weight<br />
Width<br />
206 g/m²<br />
127 cm<br />
from 5m²<br />
4,<strong>02</strong> 3,38<br />
Construction<br />
Plain<br />
from 10m²<br />
3,84 3,23<br />
Warp<br />
17 y/cm<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
3,57 3,00<br />
3,31 2,78<br />
2,73 2,29<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Weft<br />
Sizing<br />
Suitable for<br />
11,8 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 169g/m², laminate thickness: 0,23mm, laminate weight: 375g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 47
Glass Filament Fabrics -Finish-<br />
Article: HP-U220EF<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²* 6,49 5,45<br />
from 5m² 5,94 4,99<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
5,65<br />
4,95<br />
4,39<br />
3,95<br />
4,75<br />
4,16<br />
3,69<br />
3,32<br />
Fields of Application:<br />
Design of models, sports equipment,<br />
airfoil coating, rotor blades,<br />
sandwich components.<br />
Weight 220 g/m²<br />
Width 100 cm<br />
Construction Plain 0°<br />
Warp 6 y/cm<br />
Weft 7 y/cm<br />
Sizing Finish<br />
Suitable for epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 181g/m², laminate thickness: 0,24mm, laminate weight: 401g/m²<br />
Article: HP-P280EF<br />
Plain Width: 100cm<br />
Article: HP-T280/127EF<br />
Twill Width: 127cm<br />
Technical Data<br />
Weight 280 g/m²<br />
Width 100 / 127 cm<br />
Construction<br />
Plain / Twill<br />
Warp<br />
7 y/cm<br />
Weft<br />
7 y/cm<br />
Sizing<br />
Finish<br />
Glass<br />
Price €/m² incl. VAT net<br />
from 1m²* 6,49 5,45<br />
from 5m² 5,94 4,99<br />
from 10m² 5,65 4,75<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Suitable for<br />
epoxy- & polyester resin<br />
from 25m²<br />
4,95 4,16<br />
from 50m²<br />
4,39 3,69<br />
from 100m²<br />
3,87 3,25<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 514g/m²<br />
Article: HP-S300EF<br />
Price €/m² incl. VAT net<br />
from 1m²* 7,95 6,68<br />
from 5m² 7,50 6,30<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
6,96<br />
6,43<br />
5,62<br />
5,11<br />
5,85<br />
5,40<br />
4,72<br />
4,29<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Technical Data<br />
Weight 300 g/m²<br />
Width 100 cm<br />
Construction Satin 8<br />
Warp 22 y/cm<br />
Weft 21,4 y/cm<br />
Sizing Finish<br />
Suitable for epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 250g/m², laminate thickness: 0,33mm, laminate weight: 550g/m²<br />
48<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Glass Filament Fabrics -Finish-<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Article: HP-P390EF<br />
Plain Width: 100cm<br />
Article: HP-T390EF<br />
Twill Width: 100cm<br />
Technical Data<br />
Weight 390 g/m²<br />
Width 100 cm<br />
Construction<br />
Plain / Twill<br />
Warp<br />
6 y/cm<br />
Weft<br />
6,7 y/cm<br />
Sizing<br />
Finish<br />
Price €/m² incl. VAT net<br />
from 1m²* 7,50 6,30<br />
from 5m² 6,96 5,85<br />
from 10m² 6,43 5,40<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Suitable for<br />
epoxy- & polyester resin<br />
from 25m²<br />
5,62 4,72<br />
from 50m²<br />
4,87 4,09<br />
from 100m²<br />
4,46 3,75<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 320g/m², laminate thickness: 0,43mm, laminate weight: 710g/m²<br />
Article: HP-S440EF<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
8,20 6,89<br />
7,60 6,39<br />
6,99 5,87<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
440 g/m²<br />
100 cm<br />
Mock leno<br />
6 y/cm<br />
Glass<br />
!<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
6,49 5,45<br />
5,69 4,78<br />
5,45 4,58<br />
Very good for complicate geometries<br />
and ambitious components!<br />
Fields of Application:<br />
Model making, motor sports, tank<br />
and mould construction.<br />
Weft<br />
Sizing<br />
Suitable for<br />
8,5 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 360g/m², laminate thickness: 0,48mm, laminate weight: 800g/m²<br />
Article: HP-HD1000EF<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
22,50 18,91<br />
Weight<br />
Width<br />
1000 g/m²<br />
100 cm<br />
from 5m²<br />
20,90 17,56<br />
Construction<br />
HD-Plain<br />
from 10m²<br />
19,99 16,80<br />
Warp<br />
22,4 y/cm<br />
!<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
18,45 15,50<br />
16,99 14,28<br />
on request<br />
Very good for complicate geometries<br />
and ambitious components!<br />
Fields of Application:<br />
Model making, motor sports, tank<br />
and mould construction.<br />
Weft<br />
Sizing<br />
Suitable for<br />
14 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 820g/m², laminate thickness: 1,10mm, laminate weight: 1800g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 49
Glass Filament Fabrics - Finish-SOFT -<br />
NEW “SOFT“ FINISH!!<br />
The optimized finish process makes this fabric particularly flexible and drape, also a very good impregnation<br />
properties.<br />
Article: HP-T163EF-SOFT<br />
Twill Width: 100cm<br />
Price €/m² incl. VAT net<br />
Technical Data<br />
Weight 162 g/m²<br />
Width 100 cm<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
5,34 4,49<br />
4,75 3,99<br />
4,43 3,72<br />
3,88 3,26<br />
3,44 2,89<br />
2,96 2,49<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Suitable for<br />
Twill<br />
11,8 y/cm<br />
12 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 136g/m², laminate thickness: 0,18mm, laminate weight: 3<strong>02</strong>g/m²<br />
Article: HP-T280EF-SOFT<br />
Twill Width: 100cm<br />
Price €/m² incl. VAT net<br />
Technical Data<br />
Weight 290 g/m²<br />
Width 100 cm<br />
Glass<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
6,49 5,45<br />
5,94 4,99<br />
5,65 4,75<br />
4,95 4,16<br />
4,39 3,69<br />
3,87 3,25<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Suitable for<br />
Twill<br />
7 y/cm<br />
7 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 514g/m²<br />
Article: HP-T390EF-SOFT<br />
Twill Width: 100cm<br />
Price €/m² incl. VAT net<br />
Technical Data<br />
Weight 390 g/m²<br />
Width 100 cm<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
7,50 6,30<br />
6,96 5,85<br />
6,43 5,40<br />
5,62 4,72<br />
4,87 4,09<br />
4,46 3,75<br />
Fields of Application:<br />
Model making, sports equipment,<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Suitable for<br />
Twill<br />
6 y/cm<br />
6,7 y/cm<br />
Finish<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 320g/m², laminate thickness: 0,43mm, laminate weight: 710g/m²<br />
50<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Starter set mould making<br />
With this set you can create a master model of a positive<br />
or negative form. The materials are sufficient for small to<br />
medium sized moulds up to 1m².<br />
You can find it in the catalogue on page 195 or in our online<br />
shop www.3d-gewebe.de<br />
INSTRUCTION: MOLD CONSTRUCTION<br />
On our website (Video & Download Portal) you can find various work instructions and tutorials for free around<br />
the theme of “Mold Construction”.<br />
Please use the QR-Code to get to the instruction or visit<br />
our website www.hp-textiles.com (category “Downloads”).<br />
Glass<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 51
OVERVIEW GLASS ROVING FABRIC<br />
The Glass-Roving-Fabric consists of one or a certain number of glass strands aligned almost parallel, twist free<br />
and bundled to form. The diameter of a single filament is between 13mµ and 24mµ.<br />
You can make thick mouldings with less layers. The fibre content and the strength of these laminates is higher<br />
compared to the Glass-Fibre-Mats but lower than the Glass-Filament-Fabrics or multiaxial fabrics.<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
WEAVE STY-<br />
LE<br />
THREADS/cm<br />
Warp / Weft<br />
YARN<br />
TYPE<br />
YARN TYPE<br />
Weft Tex<br />
WIDTH<br />
mm<br />
52 HP-P300E 300 Plain<br />
5,0 x 5,0 300 300 130<br />
52 HP-P401E 400 Plain<br />
3,3 x 2,3 600 900 130<br />
53 HP-T580E 580 Twill 2/2<br />
2,5 x 2,2 1200 1200 130<br />
53 HP-P600E 600 Plain<br />
2,5 x 2,4 1200 1200 130<br />
53 HP-P800E 800 Plain<br />
1,7 x 1,6 2400 2400 130<br />
Different weights, constructions and widths are available upon request!<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Article: HP-P300E<br />
Technical Data<br />
Glass<br />
Price €/m² incl. VAT net<br />
from 1m²* 2,57 2,16<br />
from 5m² 2,25 1,89<br />
from 10m²<br />
from 25m²<br />
from 65m²<br />
1,80<br />
1,61<br />
1,29<br />
1,51<br />
1,35<br />
1,08<br />
Fields of Application:<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
300 g/m²<br />
130 cm<br />
Plain<br />
5 y./cm<br />
5 y./cm<br />
Silane<br />
Suitable for<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 247g/m², laminate thickness: 0,33mm, laminate weight: 547g/m²<br />
Article: HP-P401E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²* 3,14 2,64<br />
from 5m² 2,75 2,31<br />
from 10m²<br />
from 25m²<br />
from 65m²<br />
from 130m²<br />
2,20<br />
1,96<br />
1,57<br />
1,42<br />
1,85<br />
1,65<br />
1,32<br />
1,19<br />
Fields of Application:<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Weight<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
400 g/m²<br />
130 cm<br />
Plain<br />
3,3 y./cm<br />
2,3 y./cm<br />
Silane<br />
Suitable for<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 330g/m², laminate thickness: 0,44mm, laminate weight: 730g/m²<br />
52<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Glass Roving Fabrics<br />
Article: HP-T580E<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
42,9m²<br />
2 Rolls /<br />
85,8m²<br />
4,36 3,66<br />
4,21 3,54<br />
4,07 3,42<br />
3,92 3,29<br />
2,90 2,44<br />
2,62 2,20<br />
Fields of Application:<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Weight<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 476g/m², laminate thickness: 0,49mm, laminate weight: 820g/m²<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Suitable for<br />
580 g/m²<br />
130 cm<br />
Twill<br />
2,5 y./cm<br />
2,2 y./cm<br />
Silane<br />
epoxy- & polyester resin<br />
Article: HP-P600E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
41,5m²<br />
2 Rolls /<br />
83m²<br />
3,68 3,09<br />
3,55 2,98<br />
3,44 2,89<br />
3,31 2,78<br />
2,82 2,37<br />
2,45 2,06<br />
Fields of Application:<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Weight<br />
600 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 493g/m², laminate thickness: 0,66mm, laminate weight: 1093g/m²<br />
Width<br />
Construction<br />
Warp<br />
Weft<br />
Sizing<br />
Suitable for<br />
127 / 130 cm<br />
Plain<br />
2,5 y./cm<br />
2,4 y./cm<br />
Silane<br />
epoxy- & polyester resin<br />
Glass<br />
Article: HP-P800E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²* 4,33 3,64<br />
Weight<br />
Width<br />
800 g/m²<br />
127 cm<br />
from 5m²<br />
3,71 3,12<br />
Construction<br />
Plain<br />
from 10m²<br />
3,34 2,81<br />
Warp<br />
1,7 y./cm<br />
from 25m²<br />
from 62,5m²<br />
from 125m²<br />
2,98 2,50<br />
2,48 2,08<br />
2,23 1,87<br />
Fields of Application:<br />
boat construction, tank and<br />
mould construction, vehicle parts.<br />
Weft<br />
Sizing<br />
1,6 y./cm<br />
Silane<br />
Suitable for<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 658g/m², laminate thickness: 0,88mm, laminate weight: 1458g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 53
Glass Filament Fabric Tapes -Silane-<br />
E-Glass Fibres are the most versatile and widely used fibres of any reinforcement<br />
material.<br />
Different weigths and widths available upon request.<br />
Fields of application:<br />
• Tanks, pipes, hulls<br />
• Model making<br />
• Boat construction<br />
• Sport equipment<br />
• Repairs<br />
• Reinforcements<br />
Suitable for epoxy and polyester resins.<br />
ARTICLE<br />
MATERIAL: E-Glass<br />
warp / weft<br />
Purchase only possible as a complete roll<br />
DENSITY<br />
warp / weft<br />
WEIGHT<br />
g/m²<br />
WIDTH<br />
cm<br />
LENGHT<br />
m<br />
HP-P80/080E 34 x 34 tex 12 x 11,4 80 8 200<br />
HP-P170/<strong>02</strong>5E 136 x 68 tex 7,2 x 5x2 170 2,5 50<br />
HP-P170/050E 136 x 68 tex 7,2 x 5x2 170 5 100<br />
HP-P440/050E 300 x 600 tex 5 x 4,8 440 5 50<br />
HP-P440/050E 300 x 600 tex 5 x 4,8 440 10 50<br />
Article: HP-P80/080E<br />
Price € / m incl. VAT net<br />
Glass<br />
200 m<br />
400 m<br />
600 m<br />
1000 m<br />
0,58 0,49<br />
0,52 0,44<br />
0,46 0,39<br />
0,42 0,35<br />
Article: HP-P170/<strong>02</strong>5E<br />
Price € / m incl. VAT net<br />
50 m<br />
100 m<br />
200 m<br />
500 m<br />
1000 m<br />
0,39<br />
0,35<br />
0,31<br />
0,26<br />
0,23<br />
0,33<br />
0,29<br />
0,26<br />
0,22<br />
0,19<br />
Article: HP-P7/050E<br />
Price € / m incl. VAT net<br />
100 m<br />
200 m<br />
500 m<br />
1000 m<br />
0,42<br />
0,35<br />
0,30<br />
0,26<br />
0,35<br />
0,29<br />
0,25<br />
0,22<br />
Article: HP-P440/050E Article: HP-P440/100E<br />
Price € / m incl. VAT net<br />
50 m<br />
100 m<br />
200 m<br />
500 m<br />
1000 m<br />
0,39<br />
0,35<br />
0,31<br />
0,26<br />
0,23<br />
0,33<br />
0,29<br />
0,26<br />
0,22<br />
0,19<br />
Price € / m incl. VAT net<br />
50 m<br />
100 m<br />
200 m<br />
500 m<br />
1000 m<br />
0,70<br />
0,65<br />
0,58<br />
0,46<br />
0,42<br />
0,59<br />
0,55<br />
0,49<br />
0,39<br />
0,35<br />
54<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Glass Filament Fabric Tapes -Silane-<br />
Technical Data<br />
Weight<br />
Construction<br />
Warp<br />
Weft<br />
144 g/m²<br />
Plain<br />
11 y./cm<br />
10 y./cm<br />
Article: HP-P144/050E<br />
Width: 5 cm Length: 100lfm<br />
Price €/roll incl. VAT net<br />
50 m<br />
Basic price/m<br />
10,69<br />
0,21<br />
8,98<br />
0,18<br />
Lenght<br />
50, 100, 200 lfm per roll<br />
Tube diameter HP-P144/050E:<br />
76mm at 50m and 100m / 18mm at 200m<br />
100 m<br />
Basic price/m<br />
200 m<br />
Basic price/m<br />
400 m / 2x200 m<br />
Basic price/m<br />
1000 m / 5x200 m<br />
Basic price/m<br />
2000 m / 10x200 m<br />
Basic price/m<br />
19,60 16,47<br />
0,20 0,16<br />
31,95 26,85<br />
0,16 0,13<br />
29,27 24,60<br />
0,15 0,12<br />
26,78 22,50<br />
0,13 0,11<br />
24,87 20,90<br />
0,12 0,10<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 118g/m², laminate thickness: 0,16mm, laminate weight: 262g/m²<br />
Glass<br />
Technical Data<br />
Weight<br />
Construction<br />
Warp<br />
Weft<br />
220 g/m²<br />
Plain<br />
6,0 y./cm<br />
4,8 y./cm<br />
Article: HP-P221/100E<br />
Width: 10 cm Length: 100 lfm<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m<br />
43,91<br />
0,44<br />
36,90<br />
0,37<br />
Article: HP-P221/200E<br />
Width: 20 cm Length: 100 lfm<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m<br />
79,61<br />
0,80<br />
66,90<br />
0,67<br />
from 5 rolls<br />
Basic price/m<br />
39,15 32,90<br />
0,39 0,33<br />
from 5 rolls<br />
Basic price/m<br />
71,28 59,90<br />
0,71 0,59<br />
from 10 rolls<br />
Basic price/m<br />
35,58 29,90<br />
0,36 0,30<br />
from 10 rolls<br />
Basic price/m<br />
66,52 55,90<br />
0,67 0,59<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 184g/m², laminate thickness: 0,25mm, laminate weight: 408g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 55
Bidiagonal Glass Fabric Tape<br />
This Fabric-Tape is particulary smooth and it can be easily applied around corners, curves and edges. It is suitable<br />
for applications in boat and tank construction, model making, sports equipment, pond and swimming pool<br />
constructions.<br />
Construction:<br />
The fibres are crossed on top of each other in +45°C<br />
and -45°C. They are fixed by a sewing thread.<br />
Fields of Application:<br />
Sports equipment,tanks, pipes,<br />
hulls, model making, boat building,<br />
reinforcements & repairs.<br />
Technical Data<br />
Weight<br />
Width<br />
Length<br />
320 g/m²<br />
10 / 15 / 20 / 30 cm<br />
20 / 50 / 100 m<br />
Bidiagonal +45°/-45°<br />
+45°/-45° each 160 g/m² 200tex<br />
Fibre<br />
Suitable for<br />
E-Glass with Silane<br />
epoxy- & polyester resin<br />
Glass<br />
Article: HP-B320/100E<br />
Width: 10 cm<br />
Price €/roll incl. VAT net<br />
20 m<br />
Basic price/m<br />
9,90<br />
0,50<br />
8,32<br />
0,42<br />
Article: HP-B320/150E<br />
Width: 15 cm<br />
Price €/roll incl. VAT net<br />
20 m<br />
Basic price/m<br />
11,90<br />
0,60<br />
10,00<br />
0,50<br />
50 m<br />
Basic price/m<br />
17,50 14,71<br />
0,35 0,29<br />
50 m<br />
Basic price/m<br />
21,90 18,40<br />
0,44 0,37<br />
100 m<br />
Basic price/m<br />
27,90 23,45<br />
0,28 0,23<br />
100 m<br />
Basic price/m<br />
36,85 30,97<br />
0,37 0,31<br />
Article: HP-B320/200E<br />
Width: 20 cm<br />
Price €/roll incl. VAT net<br />
20 m<br />
Basic price/m<br />
13,90<br />
0,70<br />
11,68<br />
0,58<br />
Article: HP-B320/300E<br />
Width: 30 cm<br />
Price €/roll incl. VAT net<br />
20 m<br />
Basic price/m<br />
17,80<br />
0,89<br />
14,96<br />
0,75<br />
50 m<br />
Basic price/m<br />
25,90 21,76<br />
0,52 0,44<br />
50 m<br />
Basic price/m<br />
34,90 29,33<br />
0,70 0,59<br />
100 m<br />
Basic price/m<br />
44,90 37,73<br />
0,45 0,38<br />
100 m<br />
Basic price/m<br />
62,90 52,86<br />
0,63 0,53<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 263g/m², laminate thickness: 0,35mm, laminate weight: 583g/m²<br />
56<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Bidiagonal Glass Fabric Tape<br />
Article: HP-B420E<br />
Price €/roll incl. VAT net<br />
20 m<br />
Basic price/m<br />
50 m<br />
Basic price/m<br />
9,75<br />
0,49<br />
17,45<br />
0,35<br />
8,19<br />
0,41<br />
14,66<br />
0,29<br />
Technical Data<br />
Weight 420 g/m²<br />
Width 9,5 cm<br />
Length 20 / 50 / 100 m<br />
Bidiagonal +45°/-45°<br />
+45°/-45° each 210 g/m² 300tex<br />
100 m<br />
Basic price/m<br />
29,90 25,13<br />
0,30 0,25<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 345g/m², laminate thickness: 0,46mm, laminate weight: 765g/m²<br />
Glass<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 57
Glass Fibre Braided Sleeve<br />
Glass fibre braided sleeves are ideal for the production of tubes and also for prostheses in orthopedic technology.<br />
Another major area of application is spar- or hollow structures in vehicles, sports equipment and boat<br />
building.<br />
The glass fibre sleeves are well suitable for applications with epoxy or polyester resins.<br />
The diameter of the braided sleeves can be varied by stretching. Ideally, the fiber angle should be between 30°<br />
and 60°. Optimal torsion and shear strengths are achieved at an angle of 45°. You can find more detailed information<br />
on our product data sheet.<br />
Our glass fibre braided sleeves are always offered and sold in stretched condition, since it is technically<br />
not possible to wrap the hoses with a fiber angle of 45°. As a guideline, a length change of approx. 20-30% is<br />
possible. Example: straight carbon sleeve approx. 100m. / at 45° length of approx. 75m<br />
ARTICLE<br />
MATERIAL<br />
E-Glass<br />
NUMBER OF<br />
ENDS<br />
DIAMETER AT 45°<br />
mm<br />
AREA OF APPLICATION<br />
ø mm<br />
HP-BSE017/060 34x2tex 60 17 5 - 21<br />
HP-BSE<strong>02</strong>0/144 136tex 144 20 10 - 25<br />
HP-BSE043/192 136tex 192 43 20 - 55<br />
HP-BSE055/288 136tex 288 55 25 - 70<br />
HP-BSE100/720 136tex 720 100 40 - 125<br />
Article: HP-BSE017/060<br />
Article: HP-BSE<strong>02</strong>0/144<br />
Glass<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
10 m<br />
Basic price/m<br />
8,06<br />
1,61<br />
9,40<br />
0,94<br />
6,75<br />
1,35<br />
7,90<br />
0,79<br />
Price €/roll incl. VAT net<br />
5 m<br />
Basic price/m<br />
10 m<br />
Basic price/m<br />
9,77<br />
1,95<br />
12,66<br />
1,27<br />
8,20<br />
1,64<br />
10,60<br />
1,06<br />
25 m<br />
Basic price/m<br />
14,98 12,50<br />
0,60 0,50<br />
25 m<br />
Basic price/m<br />
22,72 19,00<br />
0,91 0,76<br />
50 m<br />
Basic price/m<br />
21,96 18,50<br />
0,44 0,37<br />
50 m<br />
Basic price/m<br />
36,63 31,00<br />
0,73 0,62<br />
100 m<br />
Basic price/m<br />
38,53 32,00<br />
0,39 0,32<br />
100 m<br />
Basic price/m<br />
66,98 56,00<br />
0,67 0,56<br />
Article: HP-BSE043/192 Article: HP-BSE055/288<br />
Article: HP-BSE100/720<br />
Price €/roll incl. VAT net<br />
5 m 11,76 9,90<br />
Basic price/m 2,35 1,98<br />
Price €/roll incl. VAT net<br />
5 m 13,57 11,40<br />
Basic price/m 2,71 2,28<br />
Price €/roll incl. VAT net<br />
5 m 28,38 23,85<br />
Basic price/m 5,68 4,77<br />
10 m<br />
Basic price/m<br />
16,45 13,80<br />
1,64 1,38<br />
10 m<br />
Basic price/m<br />
19,90 16,70<br />
1,99 1,67<br />
10 m<br />
Basic price/m<br />
47,57 40,00<br />
4,76 4,00<br />
25 m<br />
Basic price/m<br />
31,71 26,75<br />
1,27 1,07<br />
25 m<br />
Basic price/m<br />
39,91 33,50<br />
1,60 1,34<br />
25 m<br />
Basic price/m<br />
106,89 89,75<br />
4,28 3,59<br />
50 m<br />
Basic price/m<br />
53,36 45,00<br />
1,07 0,90<br />
50 m<br />
Basic price/m<br />
69,19 58,00<br />
1,38 1,16<br />
50 m<br />
Basic price/m<br />
193,92 163,00<br />
3,88 3,26<br />
100 m<br />
Basic price/m<br />
99,60 84,00<br />
1,00 0,84<br />
100 m<br />
Basic price/m<br />
129,99 109,00<br />
1,30 1,09<br />
100 m<br />
Basic price/m<br />
377,14 317,00<br />
3,77 3,17<br />
58<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Glass Fibre Flat Braid<br />
E-Glass braided tapes are an excellent alternative to conventional glass fiber tapes. Due to the special braiding<br />
technique, the application width is variable. By stretching or gathering together the width can be changed. Ideally,<br />
the fiber angle should be between 30° and 60°. Optimal torsion and shear strengths without complex cutting<br />
are therefore possible.<br />
The e-glass fiber braided tapes are well suitable for applications with epoxy or polyester resins. You can find<br />
more detailed information on our product data sheet.<br />
Our e-glass braided tapes are always offered and sold in stretched condition, since it is technically not possible<br />
to wrap the tapes with a fiber angle of 45°. As a guideline, a length change of approx. 20-30% is possible.<br />
Example: straight carbon sleeve approx. 100m. at 45° length of approx. 75m. Please note that the length changes<br />
depending on the fibre angle.<br />
ARTICLE<br />
MATERIAL<br />
E-Glass<br />
NUMBER OF<br />
ENDS<br />
WIDTH AT 45°<br />
mm<br />
AREA OF APPLICATION<br />
mm<br />
HP-BFE036/65 136tex 65 36 20 - 40<br />
HP-BFE065/130 136tex 130 65 25 - 80<br />
Article: HP-BFE036/65 Article: HP-BFE065/130<br />
Price €/roll incl. VAT net<br />
5 m 9,31 7,80<br />
Basic price/m 1,86 1,56<br />
Price €/roll incl. VAT net<br />
5 m 11,10 9,30<br />
Basic price/m 2,22 1,86<br />
10 m<br />
Basic price/m<br />
11,78 9,90<br />
1,18 0,99<br />
10 m<br />
Basic price/m<br />
15,18 12,80<br />
1,52 1,28<br />
25 m<br />
Basic price/m<br />
50 m<br />
Basic price/m<br />
20,63 17,25<br />
0,83 0,69<br />
32,67 27,50<br />
0,65 0,55<br />
25 m<br />
Basic price/m<br />
50 m<br />
Basic price/m<br />
28,71 24,13<br />
1,15 0,97<br />
47,58 39,98<br />
0,95 0,80<br />
Glass<br />
100 m<br />
Basic price/m<br />
59,35 50,00<br />
0,59 0,50<br />
100 m<br />
Basic price/m<br />
89,13 75,00<br />
0,89 0,75<br />
Braided Sleeve<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 59
OVERVIEW CHOPPED GLASS MAT<br />
The mat consists of chopped and un-oriented E-Glass spinning threads which are coated with a silane sizing.<br />
The connection of the spinning threads among each other takes place by a powdery, in styrene readily soluble<br />
and polyester based mat-binder. The processing takes place by the usual contact process. The mat is suitable for<br />
epoxy, polyester and vinylester resins.<br />
ECR-Glass fibre mat (HP-MP450C) combine the electrical and mechanical properties of E-glass fibre with a superior<br />
chemical corrosion resistance, superior thermal resistance, higher dielectric strength and better surface resistivity.<br />
ECR-Glass (E-Glass Corrosion Resitant) has an extremely high corrosion resistance. ECR-Glass chopped<br />
strand mat is made from fibreglass strands of a certain length and they are bonded together with a powder binder.<br />
PAGE ARTICLE WEIGHT<br />
g/m²<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
ROLL WEIGHT<br />
kg / roll<br />
INNER TUBE Ø<br />
mm<br />
WIDTH<br />
cm<br />
PACKING<br />
QUANTITY<br />
roll / palett<br />
61 HP-MPS150E 150 25/30/42 76 125 Foil<br />
20<br />
61 HP-MP225E 225 25/35/42 76 125 Foil<br />
20<br />
61 HP-MP300E 300 25/35/42 76 125 Foil<br />
20<br />
61 HP-MP450E 450 25/35/42 76 125 Foil<br />
20<br />
62 HP-MP600E 600 25/35/42 76 125 Foil<br />
20<br />
62 HP-MP450C 450 30/45 76 125 Foil<br />
20<br />
Different weights, constructions and widths are available upon request!<br />
Glass<br />
60<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Chopped Strand Mats -Powder Bounded-<br />
Artikel: HP-MPS150E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
1,67 1,40<br />
Weight<br />
Width<br />
150 g/m²<br />
125 cm<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
1 Roll / 25kg<br />
€/kg<br />
1,37 1,15<br />
1,18 0,99<br />
1,00 0,84<br />
0,82 0,69<br />
4,45 3,74<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, garden<br />
ponds and swimming pools.<br />
Construction<br />
Yarn type<br />
Strand linier density:<br />
Sizing<br />
Suitable for<br />
Chopped Strand Mat<br />
E-Glass<br />
15 tex<br />
Silane<br />
EP-, UP- & VE-Resin<br />
Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 376g/m², laminate thickness: 0,38mm, laminate weight: 526g/m²<br />
Artikel: HP-MP225E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
1 Roll / 25kg<br />
€/kg<br />
1,83 1,54<br />
1,51 1,27<br />
1,25 1,05<br />
1,05 0,88<br />
0,94 0,79<br />
3,25 2,73<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, garden<br />
ponds and swimming pools.<br />
Weight<br />
Width<br />
Construction<br />
Yarn type<br />
Strand linier density:<br />
Sizing<br />
Suitable for<br />
225 g/m²<br />
125 cm<br />
Chopped Strand Mat<br />
E-Glass<br />
33 tex<br />
Silane<br />
EP-, UP- & VE-Resin<br />
Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 560g/m², laminate thickness: 0,58mm, laminate weight: 789g/m²<br />
Artikel: HP-MP300E<br />
Technical Data<br />
Glass<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
2,31 1,94<br />
Weight<br />
Width<br />
300 g/m²<br />
125 cm<br />
from 5m²<br />
1,92 1,61<br />
Construction<br />
Chopped Strand Mat<br />
from 10m²<br />
1,58 1,33<br />
Yarn type<br />
E-Glass<br />
from 25m²<br />
from 50m²<br />
1 Roll / 25kg<br />
€/kg<br />
1,32 1,11<br />
1,18 0,99<br />
3,00 2,52<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, garden<br />
ponds and swimming pools.<br />
Strand linier density:<br />
Sizing<br />
Suitable for<br />
33 tex<br />
Silane<br />
EP-, UP- & VE-Resin<br />
Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 750g/m², laminate thickness: 0,77mm, laminate weight: 1050g/m²<br />
Artikel: HP-MP450E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll / 25kg<br />
€/kg<br />
3,38 2,84<br />
2,80 2,35<br />
2,31 1,94<br />
1,93 1,62<br />
3,00 2,52<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, garden<br />
ponds and swimming pools.<br />
Weight<br />
Width<br />
Construction<br />
Yarn type<br />
Strand linier density:<br />
Sizing<br />
Suitable for<br />
450 g/m²<br />
125 cm<br />
Chopped Strand Mat<br />
E-Glass<br />
33 tex<br />
Silane<br />
EP-, UP- & VE-Resin<br />
Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 1127g/m², laminate thickness: 1,15mm, laminate weight: 1577g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 61
Chopped Strand Mats -Powder Bounded-<br />
Artikel: HP-MP600E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
4,50 3,78<br />
Weight<br />
Width<br />
600 g/m²<br />
125 cm<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll / 25kg<br />
€/kg<br />
3,72 3,13<br />
3,08 2,59<br />
2,57 2,16<br />
3,00 2,52<br />
PRICES AND<br />
AVAILABILITY UPON<br />
REQUEST<br />
Construction<br />
Yarn type<br />
Strand linier density<br />
Sizing<br />
Suitable for<br />
Chopped Strand Mat<br />
E-Glass<br />
33 tex<br />
Silane<br />
EP-, UP- & VE-Resin<br />
Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 1500g/m², laminate thickness: 1,54mm, laminate weight: 2100g/m²<br />
** For reasons of technology this CSM will be removed from our range in the future.<br />
Deliveries are possible while stocks last. **<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Glass<br />
ECR Glass Mat<br />
* Up to 2,5m² the article will be delivered folded..<br />
From 3m² on a roll.<br />
ECR-Glass Fibre reinforcements combine the eletrical and mechanical properties of E-Glass Fibres with a<br />
superior chemical corrosion resistance, a superior thermal resistance, a higher dielectric strenght and a better<br />
surface resistivity.<br />
ECR-Glass (E-Glass Corrosion Resistant) has an extremely high corrosion resistance.<br />
ECR-Glass chopped strand mat is made from fibreglass strands of a certain length and they are bonded together<br />
with a powder binder.<br />
Article: HP-MP450C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from<br />
1m²*<br />
from 5m²<br />
from 10m²<br />
from 20m²<br />
1 Roll / 25kg<br />
€/kg<br />
4,58 3,85<br />
3,67 3,08<br />
3,20 2,69<br />
2,75 2,31<br />
3,99 3,35<br />
Fields of Application:<br />
sewer renovation, automotiv parts,<br />
boat construction, swimming pools.<br />
high weathering &<br />
chemical resistance<br />
Weight<br />
450 g/m²<br />
Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 1127g/m², laminate thickness: 1,15mm, laminate weight: 1577g/m²<br />
Width<br />
Construction<br />
Yarn type<br />
Strand linier density:<br />
Sizing<br />
Suitable for<br />
125 cm<br />
ECR Glass Mat<br />
ECR-Glass<br />
30 tex<br />
Silane<br />
EP-, UP- & VE-Resin<br />
62<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Combo Mat<br />
The Combo-Mat is made of a Glass-Roving-Fabric and a Glass-Fibre-Mat<br />
that are stitched together. The Glass-Fibre-Mat is made of chopped glass.<br />
The combination of the Roving-Fabric and the Fibre-Mat combines the advantages<br />
of the individual components and saves one working process.<br />
The Combo-Mat is basically used in pultrusion,<br />
RTM, filament winding and hand<br />
lay-up processes.<br />
Typical products include pultruded parts,<br />
pipe, storage tanks, wind generator blades<br />
and other FRP products.<br />
Article: HP-PC1050AD<br />
Advantex-Glass® - Combo Mat<br />
Technical Data<br />
Woven Roving + Chopped Glass<br />
Weight<br />
1050 g/m²<br />
Price €/m² incl. VAT net<br />
Width<br />
125 cm<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 23,8m²<br />
from 47,6m²<br />
from 95,2m²<br />
10,59 8,90<br />
9,22 7,75<br />
7,72 6,49<br />
6,65 5,59<br />
5,53 4,65<br />
4,99 4,19<br />
Fields of Application:<br />
Sewer pipes, boat building, car parts,<br />
tank and mould construction.<br />
high weathering &<br />
chemical resistance<br />
Roving fabric 600 g/m² Plain<br />
Glass Mat<br />
Construction<br />
450 g/m²<br />
needled<br />
Calculated data for hand laminate with 25 vol. % fibres: resin consumption: 1400g/m², laminate thickness: 1,62mm, laminate weight: 2450g/m²<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
Article: HP-PC1050E<br />
Woven Roving + Chopped Glass<br />
25%<br />
Preisvorteil<br />
Technical Data<br />
Weight<br />
1050 g/m²<br />
Glass<br />
Price €/m² incl. VAT net<br />
Width<br />
130 cm<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 65m²<br />
from 130m²<br />
6,07 5,10<br />
5,20 4,37<br />
4,68 3,93<br />
4,16 3,50<br />
3,47 2,92<br />
3,12 2,62<br />
Fields of Application:<br />
Boat construction, tank and<br />
mould construction, vehicle parts,<br />
flag poles.<br />
Roving fabric 600 g/m² Plain<br />
Glass Mat 450 g/m²<br />
Construction needled<br />
Sizing<br />
Silane<br />
Suitable for epoxy- & polyester resin<br />
Calculated data for hand laminate with 25 vol. % fibres: resin consumption: 1400g/m², laminate thickness: 1,62mm, laminate weight: 2450g/m²<br />
Article: HP-BC1050E<br />
Multiaxial Fabric + Chopped Glass<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
1 Roll /<br />
31,75m²<br />
2 Rolls /<br />
63,5m²<br />
6,10 5,12<br />
5,22 4,38<br />
4,36 3,66<br />
3,83 3,22<br />
3,13 2,63<br />
25%<br />
Preisvorteil<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, flag poles.<br />
Technical Data<br />
Weight 1050g/m²<br />
Width<br />
127cm<br />
Roving fabric 600 g/m² 0°/90°<br />
Glass Mat 450 g/m²<br />
Construction needled<br />
Sizing<br />
Silane<br />
Suitable for epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 863g/m², laminate thickness: 1,15mm, laminate weight: 1913g/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 63
C-Glass Non Woven<br />
The non-woven C-Glass-Fabric has a styren soluble binder.<br />
It has an optimised chemical resistance and a thread equipment on a<br />
silane basis.<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
The C-Glass fabrics can be applied in different processes (e.g. by using<br />
low pressure) in order to achieve visually and chemically improved surfaces.<br />
Article: HP-VJ30C<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m² 2,14 1,80<br />
Weight<br />
Width<br />
30 g/m²<br />
100 / 127 cm<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
1,71 1,44<br />
1,29 1,08<br />
1,15 0,97<br />
1,12 0,94<br />
1,07 0,90<br />
Fields of Application:<br />
Tubes and tank for chemicals,<br />
industrial pressing parts,<br />
pond and pool coatings.<br />
Construction<br />
Yarn type<br />
Suitable for<br />
Glass non woven<br />
C-Glass<br />
epoxy- & polyester resin<br />
Glass<br />
Article: HP-VJ50C<br />
Price €/m² incl. VAT net<br />
from 1m² 2,14 1,80<br />
from 5m² 1,71 1,44<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
1,29<br />
1,15<br />
1,12<br />
1,07<br />
1,08<br />
0,97<br />
0,94<br />
0,90<br />
Fields of Application:<br />
Tubes and tank for chemicals, industrial<br />
pressing parts, pond and<br />
pool coatings, model making.<br />
Technical Data<br />
Weight 50 g/m²<br />
Width 100 cm<br />
Construction Glass non woven<br />
Yarn type C-Glass<br />
Suitable for epoxy- & polyester resin<br />
64<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Mould Making Fabric - Non Woven-<br />
This Mould-Making-Fabric is especially well drapable and tensible. It is<br />
therefore suitable for complex components and forms. It is made of 100%<br />
polyester fibres and is suitable for epoxy and polyester resins.<br />
The resin consumption is at approx. 1,5-2 kg/m² depending on the application.<br />
It can be used effectively in single or multiple layers.<br />
Article: HP-VP151P<br />
Price €/m² incl. VAT net<br />
from 1m²* 3,75 3,15<br />
from 5m² 2,68 2,25<br />
from 10m²<br />
from 25m²<br />
from 65m²<br />
from 100m²<br />
2,14<br />
1,61<br />
1,34<br />
1,13<br />
1,80<br />
1,35<br />
1,13<br />
0,95<br />
Fields of Application:<br />
Car boot expansion, car-hi-fi extensions<br />
and door boards, roof liners.<br />
Technical Data<br />
Weight 150 g/m²<br />
Width<br />
130 cm<br />
Construction Non Woven<br />
Material 100% Polyester<br />
Weave needled<br />
Thickness 3 - 4 mm (unpressed)<br />
max. temp. 185°C<br />
Suitable for<br />
epoxy- & polyester resin<br />
** Ideal for complex curvatures **<br />
Mould making fabric -Combo mat-<br />
Due to the special needling of roving and chopped glass fibres this<br />
combination is especially voluminous, smooth and soft and therefore<br />
suitable for applications in moulds.<br />
Already with one layer you achieve a laminate thickness of approx.<br />
4 – 5 mm.<br />
The resin consumption is at approx. 2 kg/m² depending on surface and<br />
application.<br />
Glass<br />
Article: HP-PC600E<br />
Woven Roving + Chopped Glass<br />
Price €/m² incl. VAT net<br />
Technical Data<br />
Weight<br />
Width<br />
600 g/m²<br />
120 cm<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
7,50 6,30<br />
6,19 5,20<br />
5,59 4,70<br />
4,75 3,99<br />
4,27 3,59<br />
3,80 3,19<br />
Fields of Application:<br />
Tank and mould construction, boot<br />
expansion, car-hi-fi extensions and<br />
door boards.<br />
Roving fabric 300 g/m² Plain<br />
Choppes glass 300 g/m²<br />
Construction needled<br />
Suitable for epoxy- & polyester resin<br />
** Ideal for complex curvatures **<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 65
OVERVIEW MULTIAXIAL GLASS<br />
Non-woven Multiaxial Glass Fabrics are textile structures. Their fibres are endless and located parallel to each<br />
other. They are fixed together with a sewing thread or with a thermosetting.<br />
Many areas increase their competitiveness by using the advantages of multiaxial fabrics, whether in aerospace,<br />
boat building or motor sports.<br />
+45°<br />
-45°<br />
Quality features<br />
• Suitable for epoxy, polyester and vinylester resin<br />
• Better mechanical properties<br />
• Good wet out and lower resin consumption<br />
• Load oriented fibre orientation<br />
Applications<br />
• Boat construction<br />
• Sports equipment<br />
• Motor sports<br />
• Motor blades<br />
• Mould and tank construction<br />
0°<br />
90°<br />
Glass<br />
PAGE ARTICLE WEAVE<br />
STYLE<br />
FIBRE<br />
ORIENTATION<br />
AREAL WEIGHT<br />
g/m²<br />
WIDTH<br />
cm<br />
ROLL LENGTH<br />
m<br />
ROLL WEIGHT<br />
kg<br />
67 HP-U400E Unidirectional 0° 400 127 50 25<br />
67 HP-U600E Unidirectional 0° 600 127 40 35<br />
** HP-U960E Unidirectional 0° 960 130 40 47<br />
67 HP-U1210E Unidirectional 0° 1210 130 32 50<br />
68 HP-B421E Bidirectional 0/90° 421 127 50 27<br />
68 HP-B160E Bidiagonal +45/-45° 160 127 50 10<br />
68 HP-B300E Bidiagonal +45/-45° 300 127 50/100 20/41<br />
68 HP-B320E Bidiagonal +45/-45° 320 63/127 50/100 20/41<br />
69 HP-B450E Bidiagonal +45/-45° 450 63/127 50/100 29/57<br />
70 HP-B600E Bidiagonal +45/-45° 600 127 40 31<br />
70 HP-B810E Bidiagonal +45/-45° 810 127 25 / 50 25,5 / 51<br />
** HP-B980E Bidiagonal +45/-45° 980 127 40 50<br />
** HP-B1210E Bidiagonal +45/-45° 1210 127 35 50<br />
** HP-B630E Bidirectional 0°/90° 630 130 60 50<br />
** HP-B840E Bidirectional 0°/90° 840 130 46 50<br />
** HP-T610E Triaxial 0°/-45/+45° 610 127 50 40<br />
71 HP-T750E Triaxial 0°/-45/+45° 750 127 25 / 30 / 50 29 / 48<br />
71 HP-T1150E Triaxial 0°/-45/+45° 1150 127 25 37<br />
** HP-Q630E Quadraxial 0°/-45/90°/+45° 630 127 50 40<br />
71 HP-Q800E Quadraxial 0°/-45/90°/+45° 800 127 58 60<br />
** These articles, as well as different weights, constructions and widths are available upon request!<br />
66<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Multiaxial Glass Fabrics -Unidirectional-<br />
Article: HP-U400E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
63,5m²<br />
3,83 3,22<br />
3,36 2,82<br />
2,59 2,18<br />
2,11 1,77<br />
1,73 1,45<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, model<br />
making, ski and snowboards,<br />
rotor blades, sports equipment.<br />
Weight<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 328g/m², laminate thickness: 0,44mm, laminate weight: 728g/m²<br />
Width<br />
Unidirectional 0°<br />
440 g/m²<br />
127 cm<br />
0° 400 g/m²<br />
90° 40g/m²<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
Article: HP-U600E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
50,8m²<br />
4,85 4,08<br />
4,17 3,50<br />
3,51 2,95<br />
3,05 2,56<br />
2,50 2,10<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, model<br />
making, ski and snowboards,<br />
rotor blades, sports equipment.<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 492g/m², laminate thickness: 0,66mm, laminate weight: 1092g/m²<br />
Article: HP-U1210E<br />
Weight<br />
Width<br />
Unidirectional 0°<br />
650 g/m²<br />
127 cm<br />
0° 600 g/m²<br />
90° 50 g/m²<br />
Sizing<br />
Suitable for<br />
Technical Data<br />
Silane<br />
epoxy- & polyester resin<br />
Glass<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
50kg<br />
8,79 7,39<br />
7,56 6,35<br />
6,28 5,28<br />
5,53 4,65<br />
4,11 3,45<br />
€/kg<br />
€/kg<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, model<br />
making, ski and snowboards,<br />
rotor blades, sports equipment.<br />
Weight<br />
1210 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 994g/m², laminate thickness: 1,33mm, laminate weight: 2204g/m²<br />
Width<br />
Unidirectional 0°<br />
127 cm<br />
0° 1150g/m²<br />
90° 90g/m²<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 67
Multiaxial Glass Fabrics -Bidirectional-<br />
Article: HP-B421E<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
63,5m²<br />
3,83 3,22<br />
3,36 2,82<br />
2,59 2,18<br />
2,11 1,77<br />
1,73 1,45<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, model making, sports<br />
equipment<br />
Technical Data<br />
Weight 421 g/m²<br />
Width 127 cm<br />
Bidirectional 0°/90°<br />
0° 2<strong>02</strong> g/m²<br />
90° 201 g/m²<br />
Sizing Silane<br />
Suitable for epoxy- & polyester resin<br />
** Very well suitable for complicated geometry **<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 279g/m², laminate thickness: 0,40mm, laminate weight: 700g/m²<br />
Multiaxial Glass Fabrics -Bidiagonal-<br />
Article: HP-B160E<br />
Technical Data<br />
Glass<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
63,5m²<br />
4,71 3,95<br />
3,77 3,17<br />
3,14 2,64<br />
2,67 2,24<br />
2,27 1,91<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, model<br />
making, sports equipment, garden<br />
ponds and swimming pools.<br />
Weight<br />
Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 131g/m², laminate thickness: 0,18mm, laminate weight: 291g/m²<br />
Width<br />
160 g/m²<br />
127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 76 g/m² 68tex<br />
-45° 76 g/m² 68tex<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
Article: HP-B300E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
63,5m²<br />
5,99 5,03<br />
4,99 4,19<br />
4,59 3,86<br />
3,95 3,32<br />
3,49 2,93<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, model<br />
making, sports equipment, garden<br />
ponds and swimming pools.<br />
Weight<br />
320 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 247g/m², laminate thickness: 0,33mm, laminate weight: 547g/m²<br />
Width<br />
127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 150 g/m² 68tex<br />
-45° 150 g/m² 68tex<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
** Because of very low fiber weight each layer, sometimes gaps are possible. Such gaps are not a quality defect.**<br />
68<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Multiaxial Glass Fabrics -Bidiagonal-<br />
Article: HP-B320E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
63,5m²<br />
3,77 3,17<br />
3,36 2,82<br />
2,93 2,46<br />
2,51 2,11<br />
2,09 1,76<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, model<br />
making, sports equipment, garden<br />
ponds and swimming pools.<br />
Weight<br />
320 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 263g/m², laminate thickness: 0,35mm, laminate weight: 583g/m²<br />
Width<br />
127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 160 g/m²<br />
-45° 160 g/m²<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
Article: HP-B320/635E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 31,5m²<br />
1 Roll /<br />
63m²<br />
Article: HP-B450E<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
63,5m²<br />
3,77 3,17<br />
3,36 2,82<br />
2,93 2,46<br />
2,51 2,11<br />
2,09 1,76<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, model<br />
making, sports equipment, garden<br />
ponds and swimming pools.<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 263g/m², laminate thickness: 0,35mm, laminate weight: 583g/m²<br />
4,69 3,94<br />
4,11 3,45<br />
3,52 2,96<br />
2,93 2,46<br />
2,58 2,17<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, model<br />
making, sports equipment, garden<br />
ponds and swimming pools.<br />
Weight<br />
Technical Data<br />
Weight<br />
450 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 370g/m², laminate thickness: 0,49mm, laminate weight: 820g/m²<br />
Width<br />
Width<br />
127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 225 g/m²<br />
-45° 225 g/m²<br />
Sizing<br />
Suitable for<br />
320 g/m²<br />
63 cm<br />
Bidiagonal +45°/-45°<br />
+45° 160 g/m²<br />
-45° 160 g/m²<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
Silane<br />
epoxy- & polyester resin<br />
Glass<br />
Article: HP-B450/635E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
1 Roll /<br />
31,5m²<br />
2 Rolls /<br />
63m²<br />
4,69 3,94<br />
4,11 3,45<br />
3,52 2,96<br />
2,93 2,46<br />
2,58 2,17<br />
Fields of Application:<br />
Boat construction, tank and mould<br />
construction, vehicle parts, model<br />
making, sports equipment, garden<br />
ponds and swimming pools.<br />
Weight<br />
450 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 370g/m², laminate thickness: 0,49mm, laminate weight: 820g/m²<br />
Width<br />
63 cm<br />
Bidiagonal +45°/-45°<br />
+45° 225 g/m²<br />
-45° 225 g/m²<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 69
Multiaxial Glass Fabrics - Bidiagonal-<br />
Article: HP-B600E<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll /<br />
63,5m²<br />
5,47 4,60<br />
4,69 3,94<br />
4,22 3,55<br />
3,75 3,15<br />
3,13 2,63<br />
Fields of Application:<br />
Boat construction, tank and<br />
mould construction, vehicle parts,<br />
model making, rotor blades.<br />
Technical Data<br />
Weight 600 g/m²<br />
Width 127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 300 g/m²<br />
-45° 300 g/m²<br />
Sizing Silane<br />
Suitable for epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 493g/m², laminate thickness: 0,66mm, laminate weight: 1093g/m²<br />
Article: HP-B810E<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
1 Roll /<br />
31,75m²<br />
7,39 6,21<br />
6,33 5,32<br />
5,27 4,43<br />
3,80 3,19<br />
Fields of Application:<br />
Boat construction, tank and<br />
mould construction, vehicle parts,<br />
model making, rotor blades.<br />
Technical Data<br />
Weight 810 g/m²<br />
Width 127 cm<br />
Bidiagonal +45°/-45°<br />
+45° 400 g/m²<br />
-45° 400 g/m²<br />
Sizing Silane<br />
Suitable for epoxy- & polyester resin<br />
Glass<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 665g/m², laminate thickness: 0,89mm, laminate weight: 1475g/m²<br />
70<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Multiaxial Glass Fabrics -Triaxial / Quadraxial-<br />
Article: HP-T750E<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
1 Roll /<br />
31,75m²<br />
2 Rolls /<br />
63,5m²<br />
6,90 5,80<br />
5,91 4,97<br />
4,93 4,14<br />
4,34 3,65<br />
3,55 2,98<br />
Fields of Application:<br />
Boat constructions, tank and mould<br />
construction, vehicle parts, model<br />
making, snowboards, kickboards.<br />
Technical Data<br />
Weight 750 g/m²<br />
Width 127 cm<br />
Triaxial 0°/-45°/+45°<br />
0° 280 g/m²<br />
+45°/-45° each 235 g/m²<br />
Sizing Silane<br />
Suitable for epoxy- & polyester resin<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 616g/m², laminate thickness: 0,82mm, laminate weight: 1365g/m²<br />
Article: HP-T1150E<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
1 Roll /<br />
31,75m²<br />
2 Rolls /<br />
63,5m²<br />
Article: HP-Q800E<br />
Fields of Application:<br />
Boat construction, tank and<br />
mould construction, vehicle<br />
parts, model making, rotor<br />
blades, sports equipment.<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 945g/m², laminate thickness: 1,26mm, laminate weight: 2095g/m²<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
1 Roll / 50kg /<br />
approx. 62m²<br />
10,59 8,90<br />
9,07 7,62<br />
7,56 6,35<br />
6,65 5,59<br />
5,44 4,57<br />
7,46 6,27<br />
6,39 5,37<br />
5,33 4,48<br />
4,69 3,94<br />
3,83 3,22<br />
Fields of Application:<br />
Boat construction, tank and<br />
mould construction, vehicle<br />
parts, model making, rotor<br />
blades, sports equipment.<br />
Weight<br />
Technical Data<br />
Weight<br />
800 g/m²<br />
Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 657g/m², laminate thickness: 0,88mm, laminate weight: 1457g/m²<br />
Width<br />
Width<br />
127 cm<br />
Quadraxial 0°/-45°/90°/+45°<br />
0°/90°/+45°/-45 each 200g/m²<br />
Sizing<br />
Suitable for<br />
1150 g/m²<br />
127 cm<br />
Triaxial 0°/-45°/+45°<br />
0° 550 g/m²<br />
+45°/-45° each 300 g/m²<br />
Sizing<br />
Suitable for<br />
Silane<br />
epoxy- & polyester resin<br />
Silane<br />
epoxy- & polyester resin<br />
Glass<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 71
3D|CORE TM PET<br />
3D|CORE is a structure reinforcing foam core, which consists of hexagonal honeycombs, connected together<br />
by fine ribs. Through the honeycomb structure, the plate receives a great flexibility, which allows an excellent<br />
drapability of the foam core, and thus follows a contour.<br />
Due to the simplicity of processing 3D|CORE improves production processes and is therefore also suitable for<br />
the IMC/MTI ® -process. Therefore it not only saves time but also material.<br />
3D-CORE is the ideal closed cell foam core for your application:<br />
• 3-dimensional drapeability<br />
• Highly improved technical properties<br />
for flexural, compression and shear strength<br />
• Sustainable production<br />
• better bending stiffness<br />
• reduced input of carbon<br />
• excellent processing<br />
• highly economic<br />
• clearly better fiber impregnation<br />
• no fiber washing<br />
Resin Consumption:<br />
Surface approx.. 400g/m²/Seite<br />
Structure 90g x mm x m²<br />
Integrated flow<br />
aid<br />
drapability<br />
increase productivity<br />
Light and stable<br />
inexpensive<br />
Best technical<br />
characteristics<br />
Sandwich Material<br />
ARTICLE<br />
SHEET SIZE<br />
mm<br />
THICKNESS<br />
mm<br />
MATERIAL<br />
PET 100kg/m³<br />
Sheets / Box<br />
m² / Box<br />
HP-3DCORE-3 1<strong>02</strong>5 x 405 x 3 3 + 155 64,34<br />
HP-3DCORE-4 1<strong>02</strong>5 x 405 x 4 4 - 122 50,65<br />
HP-3DCORE-5 1<strong>02</strong>5 x 405 x 5 5 + 98 40,68<br />
HP-3DCORE-6 1<strong>02</strong>5 x 405 x 6 6 - 81 33,62<br />
HP-3DCORE-7 1<strong>02</strong>5 x 405 x 7 7 + 71 29,47<br />
HP-3DCORE-8 1<strong>02</strong>5 x 405 x 8 8 - 61 25,32<br />
HP-3DCORE-10 1<strong>02</strong>5 x 405 x 10 10 + 51 21,17<br />
HP-3DCORE-12,5 1<strong>02</strong>5 x 405 x 12,5 12,5 + 40 16,61<br />
HP-3DCORE-15 1<strong>02</strong>5 x 405 x 15 15 + 34 14,11<br />
HP-3DCORE-17 1<strong>02</strong>5 x 405 x 17 17 - 30 12,45<br />
HP-3DCORE-20 1<strong>02</strong>5 x 405 x 20 20 + 25 10,38<br />
HP-3DCORE-25 1<strong>02</strong>5 x 405 x 25 25 + 20 8,30<br />
+ = in stock - = on demand<br />
3D|CORE is available on request in different foam types, densities and structures.<br />
Foam types / densities: PET 100, 150, 200kg/m³<br />
Structures:<br />
Hexagon (PET und XPS), Rhombus (XPS), DELTA (XPS)<br />
72<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Price Reductions<br />
Further Strengths<br />
New Dimensions<br />
Article: HP-3DCORE-3 Article: HP-3DCORE-5<br />
Thickness: 3 mm PET 100kg/m³ Thickness: 5 mm PET 100kg/m³<br />
Article: HP-3DCORE-7<br />
Thickness: 7 mm<br />
PET 100kg/m³<br />
Price €/sheet incl. VAT net Price €/m² incl. VAT net Price €/m² incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
from 50 pcs.<br />
from 100 pcs.<br />
7,37<br />
6,59<br />
5,96<br />
5,49<br />
5,21<br />
4,86<br />
6,19<br />
5,54<br />
5,01<br />
4,61<br />
4,38<br />
4,09<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
from 50 pcs.<br />
from 98 pcs.<br />
7,81<br />
6,98<br />
6,32<br />
5,82<br />
5,52<br />
5,15<br />
6,57<br />
5,87<br />
5,31<br />
4,89<br />
4,64<br />
4,33<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
from 50 pcs.<br />
from 71 pcs.<br />
9,48<br />
8,48<br />
7,67<br />
7,06<br />
6,70<br />
6,26<br />
7,97<br />
7,12<br />
6,44<br />
5,94<br />
5,63<br />
5,26<br />
Article: HP-3DCORE-10 Article: HP-3DCORE-12,5 Article: HP-3DCORE-15<br />
Thickness: 10 mm PET 100kg/m³ Thickness: 12,5 mm PET 100kg/ Thickness: 15 mm PET 100kg/m³<br />
Price €/m² incl. VAT net Price €/m² incl. VAT net Price €/m² incl. VAT net<br />
from 1 pcs. 11,73 9,85 from 1 pcs. 13,18 11,08 from 1 pcs. 15,53 13,05<br />
from 5 pcs. 10,42 8,76 from 5 pcs. 11,72 9,85 from 5 pcs. 13,80 11,60<br />
from 10 pcs. 9,38 7,88 from 10 pcs. 10,55 8,86 from 10 pcs. 12,42 10,44<br />
from 25 pcs. 8,86 7,45 from 25 pcs. 9,96 8,37 from 34 pcs. 11,73 9,86<br />
from 51 pcs. 8,34 7,01 from 40 pcs. 9,37 7,88 from 68 pcs. 11,04 9,28<br />
from 1<strong>02</strong> pcs. 7,82 6,57 from 80 pcs. 8,79 7,39<br />
Sandwich Material<br />
Article: HP-3DCORE-20<br />
Thickness: 20 mm PET 100kg/m³<br />
Price €/m² incl. VAT net<br />
from 1 pcs. 19,78 16,62<br />
from 5 pcs. 17,53 14,73<br />
from 10 pcs. 16,18 13,60<br />
from 25 pcs. 15,28 12,84<br />
from 50 pcs. 14,39 12,09<br />
Article: HP-3DCORE-25<br />
Thickness: 25 mm PET 100kg/m³<br />
Price €/m² incl. VAT net<br />
from 1 pcs. 23,13 19,44<br />
from 5 pcs. 20,56 17,28<br />
from 10 pcs. 18,50 15,55<br />
from 20 pcs. 17,48 14,69<br />
from 40 pcs. 16,45 13,82<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 73
3D|CORE TM XPS<br />
3D | CORE is a Structure Reinforcing Foam Core (SVS) that consists of hexagonal foam honeycombs interconnected<br />
by fine webs.<br />
The honeycomb construction gives the board enormous flexibility, allowing for excellent drapability of the foam<br />
core, thus following a contour.<br />
The used polystyrene foam (XPS) only has a density of approx. 45Kg / m³. This foam system is particularly<br />
suitable for weight savings in areas of components that are exposed to lower dynamic loads. Due to the low<br />
resin absorption and the small cell size, the weight / power ratio is significantly better than many other foams.<br />
In addition to the familiar HEXAGON structure, the new RHOMBUS structure (division of the hexagon into 3<br />
rhombuses) offers an even more flexible application. But HEXAGON and RHOMBUS can also be combined<br />
depending on the application.<br />
By simplifying the processing, 3D | CORE improves the production processes and is therefore also a. Also<br />
ideal for the IMC / MTI® process. Not only time but also material is saved.<br />
Sandwich Material<br />
ARTICLE<br />
SHEET SIZE<br />
mm<br />
THICKNESS<br />
mm<br />
STRUCTURE Sheets / Box m² / Box<br />
HP-3DXPS-HX-3 1015 x 405 x 3 3 Hexagon 155 63,72<br />
HP-3DXPS-HX-5 1015 x 405 x 5 5 Hexagon 98 40,29<br />
HP-3DXPS-HX-10 1015 x 405 x 10 10 Hexagon 51 20,96<br />
HP-3DXPS-RB-3 1015 x 405 x 3 3 Rhombus 155 63,72<br />
HP-3DXPS-RB-5 1015 x 405 x 5 5 Rhombus 98 40,29<br />
HP-3DXPS-RB-10 1015 x 405 x 10 10 Rhombus 51 20,96<br />
HP-3DXPS-PH-2 1015 x 405 x 2 2 Hexagon 210 86,33<br />
HP-3DXPS-PH-3 1015 x 405 x 3 3 Hexagon 155 63,72<br />
Hexagon<br />
Resin Comsumption:<br />
surface approx. 200g/m² per site<br />
structure approx. 90g x mm x m²<br />
Rhombus<br />
Resin Comsumption:<br />
surface approx. 200g/m² per site<br />
structure approx. 126g x mm x m²<br />
Application areas:<br />
• The general purpose for infusion core, especially for thinner laminates.<br />
• Compatible with all regular solvent-free epoxy resins.<br />
• Suitable for closed mould processes, including vacuum infusion (IMC/MTI®-Process), RTM-light and<br />
RTM-Heavy.<br />
• Controlled and stable flow front<br />
74<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: HP-3DXPS-HX-3<br />
Thickness: 3 mm Hexagon<br />
Price €/sheet incl. VAT net<br />
from 1 pcs. 6,68 5,61<br />
from 5 pcs. 5,97 5,<strong>02</strong><br />
from 10 pcs. 5,40 4,54<br />
from 25 pcs. 4,97 4,18<br />
from 50 pcs. 4,72 3,96<br />
from 100 pcs. 4,41 3,70<br />
Article: HP-3DXPS-HX-5<br />
Thickness: 5 mm Hexagon<br />
Price €/sheet incl. VAT net<br />
from 1 pcs. 8,14 6,84<br />
from 5 pcs. 7,27 6,11<br />
from 10 pcs. 6,58 5,53<br />
from 25 pcs. 6,06 5,09<br />
from 50 pcs. 5,75 4,83<br />
from 98 pcs. 5,37 4,51<br />
Article: HP-3DXPS-HX-10<br />
Thickness: 10 mm Hexagon<br />
Price €/sheet incl. VAT net<br />
from 1 pcs. 10,89 9,15<br />
from 5 pcs. 9,68 8,13<br />
from 10 pcs. 8,71 7,32<br />
from 25 pcs. 8,22 6,91<br />
from 51 pcs. 7,74 6,50<br />
Article: HP-3DXPS-RB-3<br />
Thickness: 3 mm Rhombus<br />
Price €/sheet incl. VAT net<br />
from 1 pcs. 7,90 6,64<br />
from 5 pcs. 7,06 5,93<br />
from 10 pcs. 6,39 5,37<br />
from 25 pcs. 5,88 4,94<br />
from 50 pcs. 5,58 4,69<br />
from 100 pcs. 5,21 4,38<br />
Article: HP-3DXPS-RB-5<br />
Thickness: 5 mm Rhombus<br />
Price €/sheet incl. VAT net<br />
from 1 pcs. 9,66 8,11<br />
from 5 pcs. 8,63 7,25<br />
from 10 pcs. 7,81 6,56<br />
from 25 pcs. 7,19 6,04<br />
from 50 pcs. 6,82 5,73<br />
from 98 pcs. 6,37 5,35<br />
Article: HP-3DXPS-RB-10<br />
Thickness: 10 mm Rhombus<br />
Price €/sheet incl. VAT net<br />
from 1 pcs. 12,95 10,89<br />
from 5 pcs. 11,52 9,68<br />
from 10 pcs. 10,36 8,71<br />
from 25 pcs. 9,79 8,23<br />
from 51 pcs. 9,21 7,74<br />
Sandwich Material<br />
HP-3DXPS-PH-2 / HP-3DXPS-PH-2<br />
HP-3DXPS-PH-2 / HP-3DXPS-PH-2<br />
Article: HP-3DXPS-PH-2<br />
Thickness: 2 mm Hexagon, with holes<br />
Price €/sheet incl. VAT net<br />
from 1 pcs. 6,31 5,30<br />
from 5 pcs. 5,64 4,74<br />
from 10 pcs. 5,10 4,29<br />
from 25 pcs. 4,70 3,95<br />
from 50 pcs. 4,46 3,75<br />
from 100 pcs. 4,16 3,50<br />
210 pcs. 3,89 3,27<br />
Article: HP-3DXPS-PH-3<br />
Thickness: 3 mm Hexagon, with holes<br />
Price €/sheet incl. VAT net<br />
from 1 pcs. 6,68 5,61<br />
from 5 pcs. 5,97 5,<strong>02</strong><br />
from 10 pcs. 5,40 4,54<br />
from 25 pcs. 4,97 4,18<br />
from 50 pcs. 4,72 3,96<br />
from 100 pcs. 4,41 3,70<br />
155 pcs. 4,12 3,46<br />
Due to the special perforation, this core material is also excellently suited in the vacuum injection<br />
or in the IMC/MTI® process. The special structure makes it particularly flexible without breaking.<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 75
SORIC ® SF / LRC of Lantor<br />
SORIC ® SF<br />
Thin and good drapeable honeycomb corematerial.<br />
The general purpose for infusion core, especially for<br />
thinner laminates.<br />
Suitable for closed mould processes, including infusion<br />
(IMC/MTI-Process), RTM-light and RTM-Heavy.<br />
SORIC ® LRC<br />
Very thin honeycomb corematerial. The general<br />
purpose for infusion core, especially for thinner<br />
laminates.<br />
Suitable for closed mould processes, including infusion<br />
(IMC/MTI-Process), RTM-light and RTM-Heavy.<br />
Advantages:<br />
• excellent drapeability<br />
• The general purpose for infusion core, especially<br />
for thinner laminates.<br />
• Compatible with all regular types of resins, including<br />
Polyester, Vinylester and Epoxy.<br />
• Controlled and stable flow front<br />
Advantages:<br />
• for very thin applications<br />
• Compatible with all regular types of resins, including<br />
Polyester, Vinylester and Epoxy.<br />
• Controlled and stable flow front<br />
ARTICLE DESIGNATION THICKNESS<br />
mm<br />
WIDTH<br />
cm<br />
WEIGHT<br />
g/m²<br />
RESIN UPTAKE<br />
approx. kg/m²<br />
FIBRE TYPE<br />
HP-CORE-SF-2 Soric ® SF 2 127 125 1 Polyester<br />
HP-CORE-SF-3 Soric ® SF 3 127 165 1,3 Polyester<br />
HP-CORE-LRC-1.5 Soric ® LRC 1,5 127 115 0,6 Polyester<br />
HP-CORE-LRC-2 Soric ® LRC 2 127 155 0,8 Polyester<br />
Sandwich Material<br />
HP-CORE-LRC-3 Soric ® LRC 3 127 235 1,0 Polyester<br />
Article: HP-CORE-SF-2<br />
Thickness: 2 mm<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 101,6m²<br />
14,15 11,89<br />
12,97 10,90<br />
11,84 9,95<br />
10,47 8,80<br />
9,46 7,95<br />
7,38 6,20<br />
7,08 5,95<br />
Article: HP-CORE-SF-3<br />
Thickness: 3 mm<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 63,5m²<br />
19,28 16,20<br />
17,79 14,95<br />
15,95 13,40<br />
14,58 12,25<br />
13,03 10,95<br />
10,65 8,95<br />
Article: HP-CORE-LRC-1.5<br />
Thickness: 1,5 mm<br />
Article: HP-CORE-LRC-2<br />
Thickness: 2 mm<br />
Article: HP-CORE-LRC-3<br />
Thickness: 3 mm<br />
Price €/m² incl. VAT net<br />
from 1m² 14,15 11,89<br />
from 3m² 12,97 10,90<br />
from 5m² 11,84 9,95<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 88,9m²<br />
10,47<br />
9,46<br />
7,44<br />
7,20<br />
8,80<br />
7,95<br />
6,25<br />
6,05<br />
Price €/m² incl. VAT net<br />
from 1m² 15,41 12,95<br />
from 3m² 14,15 11,89<br />
from 5m² 12,97 10,90<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 76,2m²<br />
11,54<br />
10,34<br />
8,09<br />
7,74<br />
9,70<br />
8,69<br />
6,80<br />
6,50<br />
Price €/m² incl. VAT net<br />
from 1m² 21,99 18,48<br />
from 3m² 20,17 16,95<br />
from 5m² 18,33 15,40<br />
from 10m²<br />
from 25m²<br />
from 50,8m²<br />
16,54<br />
14,64<br />
12,85<br />
13,90<br />
12,30<br />
10,80<br />
76<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Coremat ® of Lantor<br />
Core material and print through barrier for open mould processes<br />
Advantages:<br />
• Honeycomb structure for excellent drapeability.<br />
• Is used as core material and/or print blocker.<br />
• Compatible with all regular types of resins, including Polyester, Vinylester and Epoxy.<br />
• Is suitable for hand lay-up and spray-up processes.<br />
ARTICLE DESIGNATION THICKNESS<br />
mm<br />
WIDTH<br />
cm<br />
WEIGHT<br />
g/m²<br />
RESIN UPTAKE<br />
approx. kg/m²<br />
FIBRE TYPE<br />
HP-CORE-XM-2 Coremat ® XM 2 100 80 1 Polyester<br />
HP-CORE-XM-3 Coremat ® XM 3 100 110 1,5 Polyester<br />
HP-CORE-XM-4 Coremat ® XM 4 100 140 2 Polyester<br />
HP-CORE-XM-10 Coremat ® XM 10 100 250 6,5 Polyester<br />
Applications for SORIC ® SF / LRC and Coremat ® by Lantor:<br />
• Marine: Hulls, decks and structures of boats and yachts<br />
• Transportation: Parts and panels of cars, trailers and trucks<br />
• Leisure: Kayaks, surfboards, pools and tubs<br />
• Industrial: Wind Energy, cladding panels, containers and tanks<br />
Article: HP-CORE-XM-2<br />
Thickness: 2 mm<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 80m²<br />
10,95 9,20<br />
10,20 8,57<br />
9,39 7,89<br />
8,21 6,90<br />
7,44 6,25<br />
6,65 5,59<br />
5,49 4,61<br />
Article: HP-CORE-XM-3<br />
Thickness: 3 mm<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
14,15 11,89<br />
12,97 10,90<br />
11,84 9,95<br />
10,47 8,80<br />
9,46 7,95<br />
7,38 6,20<br />
Article: HP-CORE-XM-4<br />
Thickness: 4 mm<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 40m²<br />
16,90 14,20<br />
15,70 13,19<br />
14,22 11,95<br />
12,38 10,40<br />
11,07 9,30<br />
9,10 7,65<br />
Sandwich Material<br />
Article: HP-CORE-XM-10<br />
Thickness: 10 mm<br />
Price €/m² incl. VAT net<br />
from 1m²<br />
from 3m²<br />
from 5m²<br />
from 10m²<br />
from 30m²<br />
from 50m²<br />
from 100m²<br />
PRICES AND<br />
AVAILABILITY UPON<br />
REQUEST<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 77
OVERVIEW VACUUM TECHNOLOGY<br />
In a fibre-reinforced combination, the load admission is taken primarily of the fibres.To achieve a high strength,<br />
composite components should have a very high fiber volume fraction.This is achieved by the vacuum infusion<br />
process.<br />
In the Vacuum-Infusion-Process, the materials are laid dry into the mould and the vacuum bagging film is applied<br />
before the resin is introduced.<br />
The vacuum bagging film is heremetically sealed with sealing tape. Once a complete vacuum is achieved, a fluid<br />
resin is literally sucked into the laminate via a second tube. The reinforcement fibres are thus vented through the<br />
infusion resin and impregnated and compressed at the same time.<br />
Advantages of the Vacuum-Infusion-Process:<br />
Vacuum Technology<br />
• high fibre volumen fraction and therefore achieving of optimal component properties<br />
• minimizing of gas and air pockets because of the closed impregnation<br />
• manufacturing of complex and three-dimensional components is possible<br />
• integration of inserts and foam cores is possible<br />
• high degree of automation is possible (e.g. rotor blades)<br />
16<br />
Overview of the construction of the vacuum infusion:<br />
1<br />
9<br />
15 Check the vacuum pressure<br />
with the VAC Checker<br />
during the infusion<br />
12<br />
9<br />
8<br />
1 - Mould<br />
2<br />
3<br />
4<br />
5<br />
6<br />
10<br />
7<br />
Description Material / Notes Page<br />
2 - Release agent aqueous, up to 150°C, HP-HGR555 172<br />
Priming wax and PVA, up to 100°C 172<br />
Carnauba wax, up to 80°C 173<br />
3 - Reinforcement fibres various types<br />
4 - Peel ply Polyamide, twill / plain, var. width 80 - 82<br />
5 - Perforated film HDPE, 30g/m² 83<br />
6 - Flow aid PE 145g/m², width 100cm 86<br />
7 - Flow channel PE spiral hose / Blade-Runner ® 91 - 93<br />
Flat channel for vacuum infusion 86<br />
8 - Vacuum ring line MTI ® -hose 89<br />
9 - Vacuum sealing tape Butyl rubber, use up to 80°C, black 88<br />
synth. rubber, use up to 210°C, yellow 88<br />
10 - Vacuum bagging film PA/PE/PA, width 2,60m 84<br />
PA/PE/PA, width until 8m, very clear 84<br />
PA/PE/PA as hose, width 1,50m 85<br />
PA as hose, width 20, 30, 60, 90cm 85<br />
11 - Vacuum hoses PE (esp. inexpensive), 10 or 12mm 90<br />
PUR (esp. flexible), 10 or 12mm 90<br />
12 - Plug connectors various types, manometer, valves, etc… 94 - 97<br />
13 - Squeezee ® /Squeezer ® hose clamp 93<br />
14 - MTI ® Valve Automatic valve for vacuum infusion 94<br />
15 - VAC Checker Digital Vacuum Gauge 97<br />
16 - Vacuum pump Rotary vane pump, oil-lubricated 98 - 99<br />
11<br />
9<br />
13<br />
15<br />
14<br />
Vacuum test with<br />
the VAC checker<br />
before the infusion<br />
After successful test, optional<br />
connection of the valve<br />
8<br />
www.hp-textiles.com<br />
9<br />
Vers. 5.5<br />
78<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Instructions / Videos Vacuum Technology<br />
O n<br />
our<br />
website<br />
i n<br />
the<br />
V i -<br />
deo<br />
&<br />
We<br />
are<br />
also<br />
happy<br />
to<br />
Vacuum Technology<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 79
OVERVIEW PEEL PLY / TEAR-OFF FABRIC<br />
The Peel Ply has been well-known in aircraft construction for many years. It is made of Nylon and is added into<br />
epoxy– or polyester resins as the first and/or final layer of the construction.<br />
After hardening, just before further processing it has to be peeled off slowly and in a sharp angle.<br />
This result is an overall rough, bondable upper surface free from lubricating film. Sanding or cleaning of the surface<br />
is not necessary before sticking or coating.<br />
The Peel Ply can‘t remain in the construction therefore a red or blue tracer thread is woven into the fabric.<br />
Weave Style: Plain or Twill<br />
Width: 3cm - 150cm<br />
Vacuum Technology<br />
Advantages of working with Peel Ply Fabrics:<br />
• Accurate upper surface<br />
• A bit rough after tearing off, absolutely clean and free of dust<br />
• Ideal subsoil for bonding or further laminating / painting<br />
• Saves time, no need to grind with sand-paper or removing of grinding dust<br />
In some cases slip resistant components are required (e.g. stand space of surf boards, boat decks). After tearing<br />
off the Peel Ply the surface is ready for use.<br />
1. Introduce the Peel Ply as the<br />
last layer<br />
2. After curing tear off the Peel Ply<br />
fabric<br />
3. Ideal surface for further works<br />
Video: „PEEL PLY“<br />
Please find a video with more information<br />
about ”Working with peel ply“.<br />
Use the QR-Code or visit our website www.hp-textiles.<br />
com under the category ”service“.<br />
80<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Peel Ply / Tear-Off Fabric -Plain-<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Technical Data<br />
Weight 83 g/m² Weave Plain<br />
Material Nylon 6.6 Warp 19 y./cm<br />
Weft 16 y./cm<br />
Article: HP-P83P3<br />
Width: 3 cm, Lenght: 100 lfm = 3 m²<br />
Article: HP-P83P4<br />
Width: 4 cm, Lenght: 100 lfm = 4m²<br />
Article: HP-P83P5<br />
Width: 5 cm, Lenght: 100 lfm = 5 m²<br />
Price €/roll incl. VAT net<br />
Price €/roll incl. VAT net<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
11,25 9,45<br />
from 1 roll<br />
15,00 12,60<br />
from 1 roll<br />
16,65 14,00<br />
Basic price/m²<br />
3,75 3,15<br />
Basic price/m²<br />
3,75 3,15<br />
Basic price/m²<br />
3,33 2,80<br />
from 2 rolls<br />
9,99 8,39<br />
from 2 rolls<br />
13,32 11,19<br />
from 2 rolls<br />
14,60 12,25<br />
Basic price/m²<br />
3,33 2,80<br />
Basic price/m²<br />
3,33 2,80<br />
Basic price/m²<br />
2,92 2,45<br />
from 5 rolls<br />
8,76 7,36<br />
from 3 rolls<br />
11,68 9,81<br />
from 5 rolls<br />
12,50 10,50<br />
Basic price/m²<br />
2,92 2,45<br />
Basic price/m²<br />
2,92 2,45<br />
Basic price/m²<br />
2,50 2,10<br />
from 10 rolls<br />
7,50 6,30<br />
from 7 rolls<br />
10,00 8,40<br />
from 10 rolls<br />
10,85 9,12<br />
Basic price/m²<br />
Article: HP-P83P8<br />
Width: 8 cm, Lenght: 100 lfm = 8 m²<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m²<br />
2,50 2,10<br />
26,64 22,39<br />
3,33 2,80<br />
Basic price/m²<br />
Article: HP-P83P10<br />
Width: 10 cm, Lenght: 100 lfm = 10 m²<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m²<br />
2,50 2,10<br />
29,20 24,50<br />
2,92 2,45<br />
Basic price/m²<br />
Article: HP-P83P15<br />
Width: 15 cm, Lenght: 100 lfm = 15 m²<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m²<br />
2,17 1,82<br />
43,73 36,75<br />
2,92 2,45<br />
Vacuum Technology<br />
from 2 rolls<br />
23,32 19,60<br />
from 3 rolls<br />
25,00 21,00<br />
from 2 rolls<br />
37,49 31,50<br />
Basic price/m²<br />
2,92 2,45<br />
Basic price/m²<br />
2,50 2,10<br />
Basic price/m²<br />
2,50 2,10<br />
from 3 rolls<br />
20,00 16,80<br />
from 5 rolls<br />
21,70 18,20<br />
from 4 rolls<br />
32,49 27,30<br />
Basic price/m²<br />
2,50 2,10<br />
Basic price/m²<br />
2,17 1,82<br />
Basic price/m²<br />
2,17 1,82<br />
from 7 rolls<br />
17,36 14,59<br />
from 10 rolls<br />
19,20 16,10<br />
from 7 rolls<br />
28,74 24,15<br />
Basic price/m²<br />
2,17 1,82<br />
Basic price/m²<br />
1,92 1,61<br />
Basic price/m²<br />
1,92 1,61<br />
Article: HP-P83P20<br />
Width: 20 cm, Lenght: 100 lfm = 20 m²<br />
Article: HP-P83P60<br />
Width: 60 cm, Lenght: freely selectable<br />
Article: HP-P83P100<br />
Width: 100 cm Lenght: freely selectable<br />
Price €/roll incl. VAT net<br />
Price €/m² incl. VAT net<br />
Price €/m² incl. VAT net<br />
from 1 roll<br />
58,31 49,00<br />
from 1m²*<br />
3,75 3,15<br />
from 1m²*<br />
3,75 3,15<br />
Basic price/m²<br />
2,92 2,45<br />
from 5m²<br />
3,33 2,80<br />
from 5m²<br />
3,33 2,80<br />
from 2 rolls<br />
Basic price/m²<br />
from 3 rolls<br />
Basic price/m²<br />
from 5 rolls<br />
49,98 42,00<br />
2,50 2,10<br />
43,32 36,40<br />
2,17 1,82<br />
38,32 32,20<br />
from 10m²<br />
from 25m²<br />
from 60m²<br />
from 120m²<br />
from 240m²<br />
2,92 2,45<br />
2,50 2,10<br />
2,17 1,82<br />
1,92 1,61<br />
1,76 1,48<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
from 200m²<br />
2,92 2,45<br />
2,50 2,10<br />
2,17 1,82<br />
1,92 1,61<br />
1,76 1,48<br />
Basic price/m²<br />
1,92 1,61<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 81
Peel Ply / Tear-Off Fabric -Plain-<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Technical Data<br />
Weight 83 g/m² Weave Plain<br />
Material Nylon 6.6 Warp 19 y./cm<br />
Weft 16 y./cm<br />
Article: HP-P83P150<br />
Width: 150 cmLenght: freely selectable<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 150m²<br />
from 300m²<br />
3,75 3,15<br />
3,33 2,80<br />
2,92 2,45<br />
2,50 2,10<br />
2,17 1,82<br />
1,92 1,61<br />
1,76 1,48<br />
Peel Ply / Tear-Off Fabric -Twill-<br />
Technical Data<br />
Vacuum Technology<br />
Weight 83 g/m² Weave Twill<br />
Material Nylon 6.6 Warp 21 y./cm<br />
Article: HP-T105P125<br />
Width: 125 cm Lenght: freely selectable<br />
Article: HP-T105P100<br />
Width: 100 cm Lenght: freely selectable<br />
Article: HP-T105P25<br />
Width: 25 cm Lenght: freely selectable<br />
Minimum quantity: 5m²<br />
Weft<br />
21 y./cm<br />
Price €/m² incl. VAT net<br />
from 1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
from 200m²<br />
from 250m²<br />
4,17 3,50<br />
3,75 3,15<br />
3,33 2,80<br />
2,92 2,45<br />
2,50 2,10<br />
2,17 1,82<br />
1,92 1,61<br />
The Peel-Ply is very smooth and has a good drapability because of the twill weave.<br />
Polyester Non-Woven Absorber<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
The non-woven absorber has a good drapeability.<br />
Ideal for the use in connection with components containing complex curvatures or acute radius. It absorbs the<br />
excess resin which is pressed through the Perforated Release Film. It can be used effectively in single or multiple<br />
layers.<br />
Article: HP-VP80P<br />
Price €/m² incl. VAT net<br />
from 1m²* 1,81 1,52<br />
from 5m² 1,58 1,33<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
1,36<br />
1,04<br />
0,94<br />
0,82<br />
1,14<br />
0,87<br />
0,79<br />
0,69<br />
Technical Data<br />
Material<br />
Weight<br />
Width<br />
Thickness<br />
Construction<br />
Polyester (black)<br />
80 g/m²<br />
80 cm<br />
approx. 2mm<br />
(unpressed)<br />
needled<br />
Max. temperature 185 °C<br />
82<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Polyester Non-Woven Absorber<br />
* Up to 2,5m² the article will be delivered folded.<br />
From 3m² on a roll.<br />
Article: HP-VP150P<br />
Price €/m² incl. VAT net<br />
from 1m²* 3,75 3,15<br />
from 5m² 2,68 2,25<br />
from 10m²<br />
from 25m²<br />
from 65m²<br />
from 130m²<br />
2,14<br />
1,61<br />
1,34<br />
1,13<br />
1,80<br />
1,35<br />
1,13<br />
0,95<br />
Technical Data<br />
Material<br />
Weight<br />
Width<br />
Thickness<br />
Construction<br />
Polyester (white)<br />
150 g/m²<br />
130 cm<br />
approx. 3-4mm<br />
(unpressed)<br />
needled<br />
Max. temperature 185 °C<br />
Perforated Release Film<br />
High-tensible perforated Release Film. Ideal for the use in a vacuum bag / autoclave processing of composites<br />
and vacuum press method. Suitable for the use of polyester, epoxy and phenolic resin systems.<br />
Basic purpose of the Release Film is to ensure the proper release of the helping material from the component.<br />
The Release Film is placed directly on the Peel Ply in contact with the laminate. It separates the laminate from<br />
beather / bleeder fabrics, which have no release characteristics.<br />
Article: HP-RF30/130<br />
Width: 130 cm Thickness: 30 µm<br />
Article: HP-RF44/100 **<br />
Width: 100 cm Thickness: 44 µm<br />
Article: HP-RF44/156 **<br />
Width: 156 cm Thickness: 44 µm<br />
Price €/m² incl. VAT net<br />
Technical Data<br />
Material<br />
HDPE<br />
Weight<br />
approx. 30 / 44 g/m²<br />
Width<br />
100 - 156 cm<br />
Thickness 30 / 44 µm<br />
Enlogation at break > 210%<br />
Max. temperature 120 °C<br />
Vacuum Technology<br />
from 1m²<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 130m²<br />
from 100m²<br />
from 156m²<br />
3,27 2,75<br />
2,08 1,75<br />
1,49 1,25<br />
1,18 0,99<br />
1,01 0,85<br />
0,77 0,65 HP-RF30/130<br />
0,77 0,65 HP-RF44/100<br />
0,77 0,65 HP-RF44/156<br />
From 1m² the article will be delivered folded.<br />
From 5m² on a roll.<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 83
Vacuum Bagging Film<br />
Our Vacuum Bagging Film has good mechanical properties:<br />
It has a high tensile strength, good temperature resistance, it is flexible<br />
and it has a low permeability.<br />
* Up to 5m² the article will be delivered folded.<br />
From 5m² on a roll.<br />
The Vacuum Bagging Film is the last material in the layer-construction.<br />
It should be fixed on the mould by our Sealant-Tape (HP-ST12X3/80 or<br />
HP-ST10X3/210).<br />
Article: HP-VF60/260<br />
Price €/m² incl. VAT net<br />
from 1m²* 3,95 3,32<br />
from 5m² 2,75 2,31<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
from 260m²<br />
1,95<br />
1,49<br />
1,13<br />
0,98<br />
0,77<br />
1,64<br />
1,25<br />
0,95<br />
0,82<br />
0,65<br />
Technical Data<br />
Material<br />
Weight<br />
Width<br />
PA/PE/PA<br />
approx. 60 g/m²<br />
260 cm<br />
(folded to 130 cm)<br />
Thickness approx. 60 µm<br />
Elongation at break > 300 %<br />
Max. temperature approx. 125 °C<br />
Melting point approx. 220 °C<br />
Colour<br />
Suitable for<br />
transparent green<br />
epoxy- & polyester resin<br />
Vacuum Technology<br />
Article: HP-VF70/260<br />
Width: 260 cm folded to 130 cm<br />
Price €/m² incl. VAT net<br />
from<br />
1m²*<br />
from 5m²<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
from 260m²<br />
3,95 3,32<br />
2,75 2,31<br />
1,95 1,64<br />
1,49 1,25<br />
1,13 0,95<br />
0,98 0,82<br />
0,77 0,65<br />
Technical Data<br />
Material<br />
PA/PE/PA<br />
Weight<br />
approx. 70 g/m²<br />
Thickness approx. 70 µm<br />
Elongation at break > 400 %<br />
Max. temperature approx. 127 °C<br />
Colour<br />
transparent / yellowish<br />
Suitable for epoxy- & polyester resin<br />
Article: HP-VF70/400 Article: HP-VF70/600 Article: HP-VF70/800<br />
Width: 400 cm, folded to 200 cm Width: 600 cm, folded to 180 cm Width: 800 cm, folded to 220 cm<br />
Lenght: 100 m = 400m² / roll Lenght: 100 m = 600m² / roll Lenght: 100 m = 800m² / roll<br />
Price €/roll incl. VAT net<br />
from 1 roll 280,00 236,00<br />
Basic price/m² 0,70 0,59<br />
Price €/roll incl. VAT net<br />
from 1 roll 420,00 354,00<br />
Basic price/m² 0,70 0,59<br />
Price €/roll incl. VAT net<br />
from 1 roll 560,00 472,00<br />
Basic price/m² 0,70 0,59<br />
HP-VF70/400, HP-VF70/600 and HP-VF70/800 are only available as a complete roll!<br />
Shipping costs on request!<br />
84<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Vacuum Bagging Tube<br />
Our Vacuum Bagging Tube is reasonable priced and has good mechanical<br />
properties:<br />
It has a high tensile strength, a good temperature resistance, it is<br />
flexible and it has a low permeability.<br />
Moulded components could be shoved into the tube. The ends get<br />
fixed with our Sealant-Tape (HP-ST12X3/80 or HP-ST10X3/210).<br />
Article: HP-VFT75/150<br />
Price €/m² incl. VAT net<br />
from 5m² 2,75 2,31<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
from 300m²<br />
from 750m²<br />
2,07<br />
1,61<br />
1,25<br />
1,09<br />
0,89<br />
0,79<br />
1,74<br />
1,35<br />
1,05<br />
0,92<br />
0,75<br />
0,66<br />
Delivery information: 1m = 3m²<br />
Technical Data<br />
Material<br />
Weight<br />
Width<br />
PA/PE/PA<br />
approx. 75 g/m²<br />
150 cm<br />
(Scope 300cm)<br />
Thickness ca. 75 µm<br />
Elongation at break > 300 %<br />
Max. temperature approx. 180 °C<br />
Melting point approx. 220 °C<br />
Colour<br />
Suitable for<br />
transparent green<br />
epoxy- & polyester resin<br />
The HP-VFT50 is a PA vacuum bagging tube with good mechanical properties for applications with epoxy and<br />
polyester resins. The tube is flexible, has a high tear resistance and a temperature resistance up to 195°C. Therefore,<br />
the tube is also suitable for applications in ovens and autoclaves.<br />
Moldings can easily be pushed into the tube. The ends are removed via vacuum Sealant-Tape (HP-ST12X3/80<br />
or HP ST10x3/210).<br />
Article: HP-VFT50/<strong>02</strong>0<br />
Width: 20 cm Tube-ø: 12,7 cm<br />
Price €/m incl. VAT net<br />
from<br />
from<br />
from<br />
from<br />
5m<br />
10m<br />
25m<br />
50m<br />
from 100m<br />
from 250m<br />
1,46 1,23<br />
1,25 1,05<br />
1,05 0,88<br />
0,88 0,74<br />
0,73 0,61<br />
0,61 0,51<br />
HP-VFT50/<strong>02</strong>0<br />
Technical Data<br />
Material<br />
Weight<br />
Width<br />
PA<br />
approx. 50 g/m²<br />
20, 30, 60, 90 cm<br />
Thickness ca. 50 µm<br />
Elongation at break > 330 %<br />
Max. temperature approx. 195 °C<br />
Melting point > 205 °C<br />
Colour<br />
Suitable for<br />
transparent green<br />
epoxy- & polyester resin<br />
Vacuum Technology<br />
Article: HP-VFT50/030<br />
Width: 30 cm Tube-ø: 19,1 cm<br />
Price €/m incl. VAT net<br />
from<br />
from<br />
from<br />
from<br />
5m<br />
10m<br />
25m<br />
50m<br />
from 100m<br />
from 250m<br />
2,11 1,77<br />
1,82 1,53<br />
1,49 1,25<br />
1,27 1,07<br />
1,08 0,91<br />
0,93 0,78<br />
Article: HP-VFT50/060<br />
Width: 60 cm Tube-ø: 38,2 cm<br />
Price €/m incl. VAT net<br />
from<br />
from<br />
from<br />
from<br />
5m<br />
10m<br />
25m<br />
50m<br />
from 100m<br />
from 250m<br />
2,61 2,19<br />
2,43 2,04<br />
1,95 1,64<br />
1,69 1,42<br />
1,48 1,24<br />
1,26 1,06<br />
Article: HP-VFT50/090<br />
Width: 90 cm Tube-ø: 57,0 cm<br />
Price €/m incl. VAT net<br />
from<br />
from<br />
from<br />
from<br />
5m<br />
10m<br />
25m<br />
50m<br />
from 100m<br />
from 250m<br />
3,80 3,19<br />
3,53 2,97<br />
2,82 2,37<br />
2,49 2,09<br />
2,17 1,82<br />
1,90 1,60<br />
HP-VFT50/030<br />
HP-VFT50/060<br />
HP-VFT50/090<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 85
Vacuum Mesh / Infusion Mesh<br />
The Infusion Mesh has to be applied between the Vacuum Film and the<br />
Release Film to ensure the even flow of resin throughout the moulds surface.<br />
It is generally coloured in green for a better visual clarity. After the resin is<br />
cured it has to be removed from the surface of the mould area.<br />
* Up to 2,5m² the article will be delivered folded..<br />
From 3m² on a roll.<br />
Article: HP-IM145/100<br />
Technical Data<br />
Price €/m² incl. VAT net<br />
from 1m²* 4,14 3,48<br />
from 5m² 3,55 2,98<br />
from 10m²<br />
from 25m²<br />
from 50m²<br />
from 100m²<br />
2,96<br />
2,59<br />
2,25<br />
1,77<br />
2,49<br />
2,18<br />
1,89<br />
1,49<br />
IDEAL FOR<br />
COMPLEX PARTS<br />
Material<br />
HDPE (green)<br />
Weight 145 g/m² (±5%)<br />
Width 100 cm (±5%)<br />
Thickness<br />
approx. 1,15 mm<br />
Max. temperature 120 °C<br />
Drapability good<br />
Article: HP-IM230/120<br />
Technical Data<br />
Vacuum Technology<br />
Price €/m² incl. VAT net<br />
from 1m² 4,14 3,48<br />
from 5m² 3,55 2,98<br />
from 10m²<br />
from 25m²<br />
from 60m²<br />
from 120m²<br />
2,96<br />
2,59<br />
2,25<br />
1,77<br />
2,49<br />
2,18<br />
1,89<br />
1,49<br />
IDEAL FOR<br />
LARGE, FLAT<br />
PARTS<br />
Material<br />
HDPE (green)<br />
Weight 200 g/m² (±5%)<br />
Width 120 cm (±5%)<br />
Thickness<br />
approx. 1 mm<br />
Max. temperature 120 °C<br />
Drapability<br />
not good<br />
Information of delivery:<br />
Delivery up to 2,5m² only rolled up without paper<br />
tube.<br />
More than 3m² on paper roll.<br />
Resin channel for vacuum infusion<br />
Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament<br />
core structure wrapped in a non-woven polyester. Very flexible and easy to cut<br />
to the appropriate size.<br />
Advantages<br />
• No print on the laminate<br />
• Excellent resin flow<br />
• Easy application and easy cut<br />
Article: HP-VZ1520<br />
width: 50mm weight: 35g/m<br />
Price € / m incl. VAT net<br />
from 10 m<br />
from 30 m<br />
from 50 m<br />
from 100 m<br />
1,70 1,43<br />
1,54 1,29<br />
1,36 1,14<br />
1,06 0,89<br />
Article: HP-VZ1530<br />
width: 100mm weight: 70g/m<br />
Price € / m incl. VAT net<br />
from 10 m<br />
from 30 m<br />
from 50 m<br />
from 100 m<br />
2,15 1,81<br />
1,96 1,65<br />
1,77 1,49<br />
1,42 1,19<br />
Technical Data<br />
Material<br />
Non-woven Polyester<br />
Core Material Polyester<br />
Weight<br />
35 g/m, 70g/lfm<br />
Thickness<br />
4 mm<br />
Max. temperature 80°C<br />
Suitable for epoxy- & polyester resin<br />
Packing Length 10 m or 100 m<br />
86<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
”Double Sided“ Adhesive Fibre Glass Tape<br />
The Fibre-Glass-Tape is used to fix different fabrics or core materials together or to fasten them in the mould.<br />
Article: HP-AM075/050<br />
Price €/roll incl. VAT net<br />
from 1 roll 7,90 6,64<br />
Basic price/m 0,087 0,073<br />
Technical Data<br />
Roll length<br />
Weight<br />
Width<br />
90 m<br />
75 g/m²<br />
50 mm<br />
from 5 rolls<br />
Basic price/m<br />
from 10 rolls<br />
Basic price/m<br />
from 25 rolls<br />
Basic price/m<br />
from 50 rolls<br />
Basic price/m<br />
6,90 5,80<br />
0,076 0,063<br />
5,90 4,96<br />
0,065 0,054<br />
4,90 4,12<br />
0,054 0,045<br />
4,50 3,78<br />
0,050 0,042<br />
Spray adhesive<br />
The spray adhesive HP-FIX400 is for the fixation of different reinforcement materials from HP-Textiles to hold<br />
single layers in position.<br />
• To fix reinforcing fabrics (carbon, glass, aramid,…), core materials or vacuum aids in place<br />
• Application in combination with the epoxy resins from HP-Textiles (other brands should be tested)<br />
• Excellent spray control with adjustable spray button and dosage valve<br />
• Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials<br />
Vacuum Technology<br />
Article: HP-FIX400<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 3 pcs.<br />
from 6 pcs.<br />
from 12 pcs.<br />
from 24 pcs.<br />
from 36 pcs.<br />
from 48 pcs.<br />
11,84<br />
11,25<br />
10,66<br />
9,47<br />
8,88<br />
8,29<br />
7,70<br />
9,95<br />
9,45<br />
8,96<br />
7,96<br />
7,46<br />
6,97<br />
6,47<br />
Technical Data<br />
Drying Time 5 min (20°C)<br />
Heat resistance 80 °C<br />
Colour<br />
milky cloudy<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 87
Sealant-Tape<br />
The “Tacky Tape“ is a double-sided adhesive, non-shrinking, workable and sound absorbing vacuum bag sealant<br />
tape.<br />
It is used to create a seal between the Vacuum Bagging Film and the mould and to position the Spiral Tubes.<br />
Article: HP-ST-12X3/80<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m<br />
from 5 rolls<br />
Basic price/m<br />
10,41<br />
0,69<br />
9,40<br />
0,63<br />
8,75<br />
0,58<br />
7,90<br />
0,53<br />
Technical Data<br />
Material<br />
Butyl Rubber<br />
Roll length 15 m<br />
Width<br />
12 mm<br />
Thickness<br />
3 mm<br />
Colour:<br />
black<br />
Max. temperature max. 80 °C<br />
from 10 rolls<br />
Basic price/m<br />
from 16 rolls<br />
Basic price/m<br />
8,21 6,90<br />
0,55 0,46<br />
7,68 6,45<br />
0,51 0,43<br />
Good adhesion on:<br />
Roll size:<br />
aluminium, steel, wood, glass, plastic incl. PE<br />
12x3mm / roll length = 15m / 16 rolls in one box<br />
from 48 rolls<br />
Basic price/m<br />
6,96 5,85<br />
0,46 0,39<br />
Vacuum Technology<br />
Sealant-Tape with 210°C Temperatue Resistance<br />
Permanently elastic Sealant Tape of synthetic rubber for fastening all types of vacuum films to the edges of the<br />
mould.<br />
The Sealant Tape is a double-sided adhesive, non-shrinking, workable and sound absorbing vacuum bag tape. It<br />
is used to create a seal between the Vacuum Bagging Film and the mould and to position the Spiral Tubes.<br />
Article: HP-ST10X3/210<br />
Price €/roll incl. VAT net<br />
from 1 roll<br />
Basic price/m<br />
from 5 rolls<br />
Basic price/m<br />
11,60 9,75<br />
0,77 0,65<br />
10,59 8,90<br />
0,71 0,59<br />
Technical Data<br />
Material<br />
Roll length<br />
Width<br />
Thickness<br />
Colour:<br />
Sythetic Rubber<br />
15 m<br />
10 mm<br />
3 mm<br />
yellow<br />
Max. temperature max. 210 °C<br />
from 10 rolls<br />
Basic price/m<br />
from 22 rolls<br />
Basic price/m<br />
9,40 7,90<br />
0,63 0,53<br />
8,21 6,90<br />
0,55 0,46<br />
Good adhesion on:<br />
Roll size:<br />
aluminium, steel, wood, glass, plastic incl. PE<br />
10x3mm / roll length = 15m / 22 rolls in one box<br />
from 44 rolls<br />
Basic price/m<br />
7,74 6,50<br />
0,52 0,43<br />
88<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
MTI ® - Hose<br />
Gases can escape through the membrane and be<br />
sucked off.<br />
membrane<br />
vacuum<br />
air or gases<br />
resin System<br />
Resin flow is stopped at the membrane<br />
and evenly distributed in the<br />
component.<br />
The MTI ® - Hose is a membran coated suction pipe in the branch of vacuum<br />
infusion. This new technology will provide more quality, less costs and better<br />
mechanical properties.<br />
The pores of the membrane are very small, holding the resin back and only<br />
leaving the air through the pores. The MTI ® - Hose should be placed as a ring<br />
line on the edge of the mould.<br />
Advantages:<br />
• Optimization of component quality and minimization of air inclusions<br />
• No resin trap is needed anymore, reducing resin consumption<br />
• Freely configurable resin course, it eliminates complex calculations<br />
• Minimization of dry spots, complete component impregnation and higher<br />
process reliability<br />
• High fibre volume fraction, adjustable via the infiltrated amount of resin<br />
Vacuum Technology<br />
Innovation in the<br />
Vacuuminfusion<br />
Article: HP-MTI-08<br />
Price €/m incl. VAT net<br />
from 1m 27,80 23,36<br />
from 10m 52,50 44,12<br />
from 25m 121,75 1<strong>02</strong>,31<br />
from 50m 227,00 190,76<br />
from 100m 412,00 346,22<br />
Technical Data<br />
Inner-diameter (Ø)<br />
Outer-diameter (Ø)<br />
Max. operation<br />
temperature<br />
Exhaust capacity/m by<br />
pabs. 50mpas<br />
Suitable for<br />
8 mm<br />
15 mm<br />
80°C<br />
< 50l/m<br />
EP- & UP-Resin<br />
On our website (”video & download portal“) you can find various work instructions<br />
and videos around the theme of the MTI ® -Hose for free.<br />
You can also use the QR-Code on the right to find the download portal or you<br />
can go by www.hp-textiles.com category ”service“.<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 89
PE Vacuum-Hose - Standard -<br />
The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable<br />
product in combination with our connectors POM (page 98/99).<br />
• Low weight<br />
• High impact strength<br />
• Resistancy against acid, alkali<br />
and salt solutions<br />
• is mainly used as a disposable<br />
product<br />
Technical Data<br />
Material<br />
Polyethylen<br />
Outer - diameter (Ø) 10 mm / 12 mm<br />
Inner - diameter (Ø) 8 mm / 10 mm<br />
Temperature range -10 °C upto +40 °C<br />
Shore-Hardness 50 D<br />
Colour<br />
nature<br />
Article: HP-VZ1010<br />
Outer-(Ø): 10 mm Inner-(Ø): 8 mm<br />
Price € / m incl. VAT net<br />
from 5 m<br />
from 10 m<br />
from 25 m<br />
from 50 m<br />
1,33 1,12<br />
0,99 0,83<br />
0,67 0,56<br />
0,55 0,46<br />
Article: HP-VZ1<strong>02</strong>0<br />
Outer-(Ø): 12 mm Inner-(Ø): 10 mm<br />
Price € / m incl. VAT net<br />
from 5 m<br />
from 10 m<br />
from 25 m<br />
from 45 m<br />
1,48 1,24<br />
1,14 0,96<br />
0,81 0,68<br />
0,69 0,58<br />
Vacuum Technology<br />
Is is only allowed to ordner in steps of 5<br />
PU Vacuum-Hose - Flexible -<br />
PU hose with high wall thickness and excellent flexibility.<br />
Use as resin-carrying line as well as reusable suction in combination with the vacuum pump HP VZ1200. Multiple<br />
use in combination with our connectors IQS standard (page 96 - 98).<br />
• Small bending radius by special<br />
flexibility<br />
• Very good flexibility at low temperature<br />
and recovery characteristics<br />
• Kink and corrosion proof<br />
• Resistant against aliphatic hydrocarbons<br />
and most lubrications<br />
• Non-aging in oxigene and ozone<br />
• Reusable<br />
special flexibly<br />
Technical Data<br />
Material<br />
Polyurethan<br />
Outer - diameter (Ø) 10 mm / 12 mm<br />
Inner - diameter (Ø) 6,5 mm / 8 mm<br />
Temperature range -35 °C upto +60 °C<br />
Shore-Hardness 97 A<br />
Colour<br />
transparent<br />
Article: HP-VZ1030<br />
Outer-(Ø): 10 mm Inner-(Ø): 8 mm<br />
Price € / m incl. VAT net<br />
from 5 m<br />
from 10 m<br />
from 25 m<br />
from 45 m<br />
2,80 2,35<br />
2,46 2,07<br />
1,99 1,67<br />
1,79 1,50<br />
Article: HP-VZ1040<br />
Outer-(Ø): 12 mm Inner-(Ø): 10 mm<br />
Price € / m incl. VAT net<br />
from 5 m<br />
from 10 m<br />
from 25 m<br />
from 45 m<br />
3,15 2,65<br />
2,82 2,37<br />
2,35 1,97<br />
2,15 1,81<br />
Is is only allowed to ordner in steps of 5<br />
90<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Spiral Tube for Vacuum Infusion<br />
The Spiral Tube is used as a central<br />
suction line for the vacuum<br />
moulding.<br />
It is fixed on the vacuum bagging<br />
film with our Sealant Tape.<br />
Technical Data<br />
Material<br />
Inner-Diameter (Ø)<br />
Polyethylen<br />
Max. operation temp. +80 °C<br />
Melting point +113 °C<br />
6mm / 8mm / 10mm<br />
Article: HP-ST060<br />
Outer-(Ø): 8,8 mm Inner-(Ø): 6 mm<br />
Price €/roll incl. VAT net<br />
5 m-roll<br />
Basic price/m<br />
6,95 5,84<br />
1,39 1,17<br />
Article: HP-ST080<br />
Outer-(Ø): 10,8 mm Inner-(Ø): 8 mm<br />
Price €/roll incl. VAT net<br />
5 m-roll<br />
Basic price/m<br />
7,95 6,68<br />
1,59 1,34<br />
Article: HP-ST100<br />
Outer-(Ø): 12,8 mm Inner-(Ø): 10 mm<br />
Price €/roll incl. VAT net<br />
5 m-roll<br />
Basic price/m<br />
8,95 7,52<br />
1,79 1,50<br />
10 m-roll<br />
Basic price/m<br />
10,50 8,82<br />
1,05 0,88<br />
10 m-roll<br />
Basic price/m<br />
12,50 10,50<br />
1,25 1,05<br />
10 m-roll<br />
Basic price/m<br />
14,58 12,25<br />
1,46 1,23<br />
25m-roll<br />
Basic price/m<br />
19,25 16,18<br />
0,77 0,65<br />
25m-roll<br />
Basic price/m<br />
22,25 18,70<br />
0,89 0,75<br />
25m-roll<br />
Basic price/m<br />
23,74 19,95<br />
0,95 0,80<br />
100 m 58,00 48,74<br />
(4 x 25 m) €/100 m €/100 m<br />
Basic price/m<br />
0,58 0,49<br />
100 m 63,90 53,70<br />
(4 x 25 m) €/100 m €/100 m<br />
Basic price/m<br />
Spiral Hose Connector<br />
Spiral hose connector for easy connection of the vacuum infusion pipe.<br />
Suitable for 12 mm pipe (HP-VZ1<strong>02</strong>0 / HP-VZ1040) and spiral hoses up<br />
to 14,6 mm outside diameter (HP-ST080 / HP-ST100).<br />
Article: HP-VZ1540<br />
for pipes OD= 12mm<br />
0,64 0,54<br />
100 m 70,81 59,50<br />
(4 x 25 m) €/100 m €/100 m<br />
Basic price/m 0,71 0,60<br />
Vacuum Technology<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
4,38 3,68<br />
3,94 3,31<br />
2,94 2,94<br />
Infision Connector 12mm<br />
For Pipe OD=12 mm (HP-VZ1<strong>02</strong>0 / HP-VZ1040)<br />
No imprints in the laminate and easy handling combined with the vacuum<br />
flat channel HP-VZ1520 (50 mm) or HP-VZ1530 (100 mm).<br />
Article: HP-VZ1550<br />
for pipes OD= 12mm<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
3,69 3,10<br />
3,32 2,79<br />
2,95 2,48<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 91
Resin feed line Blade Runner ®<br />
During the setup for the vacuum infusion, one or more resin feed lines are placed on the part. Often a normal spiral<br />
tube or an omega channel is used. Now this one can simply be substituted by the new resin feed line.<br />
Due to the construction and the materials the Blade Runner ® is more stable than a normal spiral tube. Thereby it<br />
is easier to place and fix it at the desired place. This makes the setup for the vacuum infusion faster. By its unique<br />
design the new resin feed line keeps a distance to the part surface. Blade Runner ® does not leave any print on the<br />
surface and minimizes air impacts especially in the area where the resin feed line is placed. The result is a higher<br />
part quality with a perfect surface and structurally better parts.<br />
With Blade Runner ® working hours and consequently costs can be saved for the setup and the work on the surface<br />
after the infusion. The resin feed line is suitable for all parts which will be produced with the vacuum infusion<br />
process. Blade Runner ® can be used for prototypes, small series, batch production and for mould building. It is<br />
particulary suitable for big and long parts like boats or also rotor blades of wind turbines.<br />
Vacuum Technology<br />
Advantages:<br />
• Easier to place and fix at the desired place<br />
• The setup for the vacuum infusion process will be faster<br />
• The resin feed line does not leave any print on the surface<br />
• Minimisation of air impacts under the resin feed line<br />
• With a smooth surface, structurally better parts will be produced<br />
• Saving of working hours and consequently costs for the setup and the working on the surface<br />
Article: HP-VZ1475<br />
Price €/roll incl. VAT net<br />
5 m-roll<br />
Basic price/m<br />
10 m-roll<br />
Basic price/m<br />
39,51 33,20<br />
7,90 6,64<br />
69,85 58,70<br />
6,99 5,87<br />
ARTICLE<br />
INNER Ø<br />
mm<br />
MAX. OPERATION TEMP.<br />
°C<br />
HP-VZ1475 20 80<br />
Innovation in the<br />
Vacuuminfusion<br />
SUITABLE FOR<br />
EP- & UP-Resin<br />
25 m-roll<br />
Basic price/m<br />
50 m-roll<br />
Basic price/m<br />
100 m-roll<br />
Basic price/m<br />
157,38 132,25<br />
6,30 5,29<br />
287,39 241,50<br />
5,75 4,83<br />
534,31 448,00<br />
5,34 4,48<br />
92<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Resin supply hose for the Blade Runner ®<br />
Using the resin supply pipe, the resin runs through the Blade Runner ® Connector into the Blade Runner ® resin<br />
line. PVC hose with spring steel wire, highly flexible, robust, smooth interior and exterior for high pressure and<br />
vacuum resistance.<br />
Article: HP-VZ1480<br />
Price €/roll incl. VAT net<br />
ARTICLE<br />
OUTER Ø<br />
mm<br />
INNER Ø<br />
mm<br />
HP-VZ1480 22 16<br />
MATERIAL<br />
PVC hose, steel spiral<br />
5 m-roll<br />
Basic price/m<br />
10 m-roll<br />
Basic price/m<br />
25 m-roll<br />
Basic price/m<br />
29,45 24,75<br />
5,89 4,95<br />
47,48 39,90<br />
4,75 3,99<br />
103,75 87,25<br />
4,15 3,49<br />
HP-VZ1480<br />
50 m-roll<br />
Basic price/m<br />
100 m-roll<br />
Basic price/m<br />
190,00 159,50<br />
3,80 3,19<br />
355,00 298,00<br />
3,55 2,98<br />
HP-VZ1490<br />
Blade Runner ® -Connector<br />
Article: HP-VZ1490<br />
Blade Runner®-Conector for the Blade Runner Resin®<br />
feed line.<br />
Article: HP-VZ1490<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
from 50 pcs.<br />
from 100 pcs.<br />
5,47<br />
4,95<br />
4,70<br />
4,30<br />
4,05<br />
3,80<br />
4,60<br />
4,16<br />
3,95<br />
3,61<br />
3,40<br />
3,19<br />
Vacuum Technology<br />
Tube Clip Squeezee ® / Squeezer ®<br />
The tube clibs allow an exact dosing of the resin flow and an easy disconnecting of the resin line in the vacuum<br />
infusion.<br />
Squeezee ® Squeezer ®<br />
Article: HP-VZ1400<br />
for hoses up to 15mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
Article: HP-VZ1425<br />
for hoses up to 25mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
32,90 27,65<br />
from 1 pcs.<br />
52,90 44,45<br />
from 5 pcs.<br />
31,26 26,27<br />
from 10 pcs.<br />
29,61 24,88<br />
Advantages:<br />
• Ideal for disconnecting all tube lines<br />
• Requires only a minimum of force for disconnecting resin lines<br />
• Exact dosing of the resin flow is possible<br />
• Designed for the everyday, industrial application<br />
• Suitable for tubes up to 15mm / 25mm outer diameter<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 93
MTI ® VALVE - Automatic Valve for Vacuum Infusi-<br />
Advantages of the MTI ® VALVE<br />
• Regulates the infusion of resin independently<br />
• No resin pooling at inlet point<br />
• Fibres are evenly covered with resin<br />
• Homogeneous laminate<br />
• Optimum fibre volume ratio<br />
• Highest quality of parts with reproducible<br />
results<br />
• Working hours and its costs can be saved<br />
Article: HP-VZ1450<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 50 pcs.<br />
from 100 pcs.<br />
4,64 3,90<br />
4,10 3,45<br />
3,45 2,90<br />
2,92 2,45<br />
2,61 2,19<br />
cross section<br />
Video for more<br />
information !!<br />
Vacuum Technology<br />
IQS-Connectors<br />
The Push-In Connectors (IQS-Standard)<br />
serve as connection between<br />
the Vacuum-Hoses. They are suitable<br />
for Vacuum-Hoses in standard PE<br />
and flexible PU.<br />
Connector - Straight-<br />
Connector for conjunction between two hoses with the same diameter.<br />
Technical Data<br />
Material Body<br />
Material Seal<br />
Plastic/<br />
nickel-plated brass<br />
NBR (nitrile rubber)<br />
Temperature range 0 °C up to +60 °C<br />
Article: HP-VZ1050<br />
for hoses with 10mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
3,50 2,94<br />
3,15 2,65<br />
2,80 2,35<br />
Article: HP-VZ1060<br />
for hoses with 12mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
4,14 3,48<br />
3,73 3,13<br />
3,31 2,78<br />
Connector - Reducing-<br />
Connector for conjunction between two hoses with different diameters (10 mm and 12 mm).<br />
Article: HP-VZ1090<br />
for reduction of hoses from<br />
12 to 10mm<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
3,95 3,32<br />
3,56 2,99<br />
3,16 2,66<br />
94<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
IQS-Connectors<br />
T-Connector<br />
Connector for the angular conjunction between three hoses.<br />
Article: HP-VZ1070<br />
for hoses with 10mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
5,10 4,29<br />
4,59 3,86<br />
4,08 3,43<br />
Article: HP-VZ1080<br />
for hoses with 12mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
5,61 4,71<br />
5,05 4,24<br />
4,49 3,77<br />
Y-Connector<br />
Connector for the linear conjunction between three hoses.<br />
Article: HP-VZ1120<br />
for hoses with 10mm outer-Ø<br />
Article: HP-VZ1130<br />
for hoses with 12mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
4,88 4,10<br />
4,39 3,69<br />
3,90 3,28<br />
Connector with Female Thread<br />
Article: HP-VZ1100<br />
for hoses with 10mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
5,91 4,97<br />
5,32 4,47<br />
4,73 3,98<br />
Connector with female thread G 1/4“ for connecting the vacuum pump and manometer.<br />
Article: HP-VZ1110<br />
for hoses with 12mm outer-Ø<br />
Vacuum Technology<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
3,88<br />
3,49<br />
3,10<br />
3,26<br />
2,93<br />
2,61<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
4,40<br />
3,96<br />
3,52<br />
3,70<br />
3,33<br />
2,96<br />
Lock Valve with Push-In Connector<br />
Lock valve with push-in connector for adjusting the evacuation.<br />
Article: HP-VZ1140<br />
for hoses with 10mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
12,49 10,50<br />
11,24 9,45<br />
10,00 8,40<br />
Article: HP-VZ1150<br />
for hoses with 12mm outer-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
13,25 11,13<br />
11,93 10,<strong>02</strong><br />
10,60 8,90<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 95
IQS-Connectors<br />
Stud to Close<br />
Stud to close up connectors.<br />
Article: HP-VZ1160<br />
for hoses with 10mm inner-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
1,17 0,98<br />
1,05 0,88<br />
0,94 0,78<br />
Article: HP-VZ1170<br />
for hoses with 12mm inner-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
1,29 1,08<br />
1,16 0,97<br />
1,03 0,86<br />
Standard-Push-Connector<br />
The Standard-Push-Connector serves for easy and low-priced<br />
connection between vacuum-hoses.<br />
Technical Data<br />
Material<br />
Plastic<br />
Temperature range 0 °C up to +80 °C<br />
Vacuum Technology<br />
Hose Connector - Straight -<br />
Connector for conjunction between two hoses with the same diameter.<br />
Article: HP-VZ1300<br />
for hoses with 8mm inner-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
0,58 0,49<br />
0,55 0,47<br />
0,52 0,44<br />
0,49 0,42<br />
Article: HP-VZ1310<br />
for hoses with 10mm inner-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
0,81 0,68<br />
0,77 0,65<br />
0,73 0,61<br />
0,69 0,58<br />
Compatible with HP-VZ1010, HP-VZ1040<br />
Compatible with HP-VZ1<strong>02</strong>0<br />
T-Hose Connector<br />
Connector for the angular conjunction between three hoses.<br />
Article: HP-VZ1320<br />
for hoses with 8mm inner-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
1,18 0,99<br />
1,12 0,94<br />
1,06 0,89<br />
1,00 0,84<br />
Compatible with HP-VZ1010, HP-VZ1040<br />
Article: HP-VZ1330<br />
for hoses with 10mm inner-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
Compatible with HP-VZ1<strong>02</strong>0<br />
1,31 1,10<br />
1,24 1,05<br />
1,18 0,99<br />
1,11 0,94<br />
96<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Standard-Push-Connector<br />
Y-Hose Connector<br />
Connector for the conjunction between three hoses.<br />
Article: HP-VZ1340<br />
for hoses with 8mm inner-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
1,26 1,06<br />
1,20 1,01<br />
1,13 0,95<br />
1,07 0,90<br />
Compatible with HP-VZ1010, HP-VZ1040<br />
Article: HP-VZ1350<br />
for hoses with 10mm inner-Ø<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
from 25 pcs.<br />
Compatible with HP-VZ1<strong>02</strong>0<br />
1,44 1,21<br />
1,37 1,15<br />
1,30 1,09<br />
1,22 1,03<br />
Vac Checker ® Digital Vacuum Gauge<br />
Digital Vacuum Gauge - VAC CHECKER<br />
• Field of application: Vacuum infusion<br />
• Storage temperature: -20 bis +50 °C<br />
• Operationg temperature: -20 up to +50 °C<br />
• Dimensions: 250 x 165 x 55 mm<br />
• Weight: approx. 500 g<br />
• Battery type: 2 mignon cells AA<br />
• Measurement transducer: Absolute pressure sensor<br />
• Measuring range: 1.100 bis 0 mbar<br />
• Vacuum resolution: 0,01 hPa / 10 micron<br />
• Parameter: mmHg, Torr, mbar, hPa, micron, inH2O, inHg, Pa<br />
• Overload: absolut 6 bar / 87 pis (relativ 5 bar / 72 psi)<br />
Vacuum Technology<br />
Attachments:<br />
Connection adapters for pipes with an internal diameter of:<br />
6mm / 8mm /10mm<br />
Article: HP-VZ1440<br />
Price €/pcs. incl. VAT net<br />
1 piece<br />
237,40 199,50<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 97
Standard Manometer for Vakuum<br />
• Manometer standing - class 2.5<br />
• Display area -1 bar to 0 bar<br />
(Vacuum)<br />
• Bar-display (black) / PSI-display<br />
(red)<br />
• Connection: G 1/4“ below<br />
• Diameter 50mm<br />
Technical Data<br />
Housing<br />
Measuring system,<br />
connection, motion work<br />
Window<br />
Temperature range<br />
ambience<br />
Medium<br />
Plastic<br />
Brass<br />
Clear plastic<br />
-40°C up to +60°C<br />
max. +60°C<br />
Article: HP-VZ1180<br />
G1/4“ below<br />
Connection: vertical (below)<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
8,23 6,91<br />
7,40 6,22<br />
6,58 5,53<br />
Article: HP-VZ1190<br />
G1/4“ at the back<br />
Connection: horizontal (at the back)<br />
Price €/pcs. incl. VAT net<br />
from 1 pcs.<br />
from 5 pcs.<br />
from 10 pcs.<br />
8,23 6,91<br />
7,40 6,22<br />
6,58 5,53<br />
Vacuum Technology<br />
Vacuum Pump 220V / 150W<br />
Compact, low-maintenance, slide vane rotary vacuum pump, with circulating oil lubricartion applicable for Vacuum-Compression<br />
& Vacuum-Infusion. For components up to approx. 10m² (depending on the layer structure).<br />
► Ideal for the IMC/MTI-Process!<br />
Performance Data:<br />
• Max. vacuum: 0,933 bar relative (complies to 20mbar absolute)<br />
(correspond to a pressure of more than 10 tons/m²)<br />
• Max. efficency by barometic pressure: 67 litre / min (= 4m³/h)<br />
• Suitable for continuous operating range between 2 and 500 mbar absolute<br />
Equipment:<br />
Vane rotary vacuum pump incl. pulse damper and 220V mains supply.<br />
Suction-sided with check valve, suction filter and two connecting adapters.<br />
Delivered incl. oil and users manual!<br />
Article: HP-VZ1250<br />
Vacuum Pump Oil HVI32<br />
Price €/pcs. incl. VAT net<br />
1 piece<br />
100ml<br />
7,74 6,50<br />
Article: HP-VZ1200<br />
Price €/pcs. incl. VAT net<br />
1 piece 669,00 562,19<br />
Technical Data<br />
Max. valid gas– and<br />
ambience emperature<br />
Motor<br />
Engine power<br />
Weight<br />
Noise level<br />
Electrical execution<br />
+12 up to + 40°C<br />
220 V / 50 Hz<br />
150 W<br />
5,4 kg<br />
52 dB(A)<br />
Protection category<br />
IP55<br />
98<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Vacuum Pump 220V / 750W<br />
Compact, low-maintenance, slide vane rotary vacuum pump, with circulating oil lubricartion applicable for Vacuum-Compression<br />
& Vacuum-Infusion. For components larger than 5m² (depending on the layer structure).<br />
► Ideal for the IMC/MTI-Process!<br />
Performance Data:<br />
• Max. vacuum: 2mbar absolute<br />
(correspond to a pressure of more than 10 tons/m²)<br />
• Max. efficency by barometic pressure: 333 liter/min (=20m³/h)<br />
• Suitable for continuous operating range between 2 and 400 mbar absolute<br />
Equipment:<br />
Rotary vane vacuum pump including 4 vibration dampers pre-assembled on aluminum plate.<br />
220V mains connection including on / off switch.<br />
Suction side equipped with non-return valve, suction filter and two connection adapters including shut-off valve.<br />
Delivery includes vacuum pump oil, oil drain valve, operating and maintenance manual!<br />
Connection adapter 1:<br />
PU vacuum line AD = 12mm; ID = 8mm (article: HP-VZ1040)<br />
Connection adapter 2:<br />
PVC suction pressure hose with steel spiral 16x3mm (article: HP-VZ1480)<br />
Observe the operating instructions before commissioning!<br />
Article: HP-VZ2000<br />
Price €/pcs. incl. VAT net<br />
1 piece 1389,00 1167,23<br />
Technical Data<br />
Max. valid gas– and<br />
ambience emperature<br />
Motor<br />
Engine power<br />
Weight<br />
Noise level<br />
+12 up to + 40°C<br />
220 V / 50 Hz<br />
750 W<br />
19 kg<br />
64 dB(A)<br />
Vacuum Technology<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 99
OVERVIEW EPOXY RESIN SYSTEMS<br />
PRIMING<br />
INFUSION<br />
ADHERE<br />
LAMINATING<br />
LAMINATING<br />
INFUSION<br />
Page<br />
Products<br />
PRIMING<br />
CASTING<br />
CASTING<br />
ADHERE<br />
COVERING<br />
COVERING<br />
FILLING<br />
FILLING<br />
1<strong>02</strong><br />
1<strong>02</strong><br />
103<br />
104 - 105<br />
106 - 107<br />
108 - 109<br />
110 - 111<br />
112 - 113<br />
HP-UC-9003 / HP-UC-9004<br />
2K-PUR grounding, sealing<br />
HP-E80FS<br />
grounding, sealing<br />
HP-E30S<br />
filler system<br />
HP-E5K, HP-E60K, HP-E120K<br />
adhesives<br />
HP-E30FB<br />
mould surfaces<br />
HP-E28L, HP-E55L, HP-E110L<br />
laminating systems<br />
HP-E29L, HP-E56L, HP-E111L<br />
laminating systems<br />
HP-E25KL, HP-E45KL<br />
multi-purpose systems<br />
++<br />
++<br />
-<br />
-<br />
-<br />
-<br />
-<br />
O<br />
-<br />
+<br />
-<br />
-<br />
-<br />
++<br />
++<br />
++<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
+<br />
-<br />
-<br />
-<br />
-<br />
++<br />
-<br />
O<br />
O<br />
++<br />
-<br />
-<br />
-<br />
-<br />
++<br />
-<br />
-<br />
++<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
O<br />
-<br />
-<br />
++<br />
-<br />
-<br />
-<br />
-<br />
+<br />
Epoxy Resin Systems<br />
114<br />
115<br />
116 - 117<br />
118 - 119<br />
120 - 121<br />
122<br />
HP-E25L, HP-E45L<br />
multi-purpose systems<br />
HP-E120WSM<br />
multipurpose system<br />
HP-E30TLS<br />
laminating system<br />
HP-E3000GL - Series<br />
infusion / injection systems<br />
HP-E3000RI<br />
infusion / injection systems<br />
HP-E120WSI<br />
infusion / injection system<br />
O<br />
-<br />
-<br />
-<br />
-<br />
-<br />
++<br />
++<br />
++<br />
+<br />
+<br />
++<br />
-<br />
+<br />
-<br />
++<br />
++<br />
++<br />
++<br />
-<br />
+<br />
-<br />
-<br />
-<br />
++<br />
-<br />
-<br />
-<br />
-<br />
-<br />
O<br />
O<br />
-<br />
O<br />
O<br />
O<br />
+<br />
-<br />
-<br />
-<br />
-<br />
-<br />
123 - 124<br />
123 - 124<br />
123 - 124<br />
125 - 127<br />
128<br />
129<br />
130<br />
131<br />
132<br />
140 - 141<br />
140 - 141<br />
HP-E25D<br />
covering system (topcoat)<br />
HP-E40D<br />
covering system (topcoat)<br />
HP-E25DM<br />
covering system (gelcoat)<br />
HP-E30TDS<br />
covering system (topcoat)<br />
HP-E50GB<br />
casting system<br />
HP-E300GB<br />
casting system<br />
HP-E45GA<br />
casting system<br />
HP-E45GB<br />
casting system<br />
HP-E45GE<br />
casting system<br />
HP-E45T, HP-E45TM<br />
laminating and covering system<br />
HP-E25TU, HP-25TMU<br />
laminating and covering system<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
O<br />
O<br />
+<br />
+<br />
+<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
++<br />
++<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
+<br />
+<br />
++<br />
++<br />
++<br />
++<br />
-<br />
-<br />
-<br />
-<br />
-<br />
++<br />
++<br />
-<br />
+<br />
-<br />
-<br />
++<br />
++<br />
++<br />
++<br />
++<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
-<br />
++ = very good applicable + = applicable o = conditionally applicable<br />
-<br />
= not provided<br />
100<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
FEATURES VISCOSITY COLOUR SYSTEM /<br />
HARDENER<br />
for non absorptive suboils<br />
(plastics, glass, metals, tiles…)<br />
the higher,<br />
the thicker<br />
Type<br />
POT LIFE<br />
min. at<br />
20°C<br />
… processing<br />
minimum(recommended)<br />
TEMPERATURES<br />
… loadability<br />
(Tg MAX in °C)<br />
HP-UC-9003<br />
low black 20 - 30 18 (25°C)<br />
n. a.<br />
HP-UC-9004<br />
for porous substrate<br />
(mineral, wood,…)<br />
low brownish HP-E80FS 35 15 (20°C)<br />
n. a.<br />
filler system for approx. osmosis<br />
treatment<br />
pasty<br />
light green - flat<br />
HP-E30FB 30 15 (20°C) 115°C<br />
adhesing / sticking together,<br />
slightly tacky<br />
medium<br />
brownish<br />
HP-E5K 5 5 (20°C) 80°C<br />
HP-E60K 60 15 (20°C) 60°C<br />
HP-E120K 120 15 (20°C) 80°C<br />
mould surfaces,<br />
black or blue, aluminium filled<br />
high<br />
(thixotropic)<br />
black or blue<br />
HP-E30FB 30 15 (20°C) 115°C<br />
standard laminating system for<br />
many applications<br />
high level laminating system for many<br />
applications,<br />
very good physiological compatibility<br />
multi-purpose system,unfilled mould resin,<br />
base for filler / putties,<br />
high chemical resistant<br />
multi-purpose system,unfilled mould resin,<br />
base for filler / putties,<br />
high chemical resistant<br />
high temperature stabilities,<br />
good resistance to fuels<br />
laminating system for building<br />
ponds / pools<br />
for infusion or injection (RTM)<br />
Ipproved by DNV GL for building of<br />
boats and wind-driven power stations<br />
low<br />
low<br />
medium<br />
low<br />
medium<br />
low<br />
very low<br />
bluish<br />
bluish<br />
slightly yellowish<br />
slightly yellowish<br />
very<br />
transparent<br />
slightly<br />
yellowish<br />
very<br />
transparent 1<br />
for infusion or injection (RTM) very low transparent 1<br />
high temperature stabilities / usable<br />
as a laminating and vacuum-infusion<br />
resin (IMC/MTI, RI, VARI,…)<br />
embedding system,<br />
for casting thickness < 50mm<br />
very low<br />
very low<br />
very<br />
transparent<br />
very<br />
transparent<br />
HP-E28L 28 15 (20°C) 75°C<br />
HP-E55L 55 18 (20°C) 81°C<br />
HP-E110L 110 18 (20°C) 75°C<br />
HP-E29L 25 15 (20°C) 93°C<br />
HP-E56L 55 20 (20°C) 91°C<br />
HP-E111L 110 18 (20°C) 79°C<br />
HP-E25KL 25 5 (20°C) 78°C<br />
HP-E45KL 45 15 (20°C) 66°C<br />
HP-E25L 25 15 (20°C) 55°C<br />
HP-E45L 45 18 (20°C) 50°C<br />
HP-E120WSM 120 18 (25°C) 150°C<br />
HP-E30TLS 30 15 (20°C) 50°C<br />
HP-E15GL 15 10 (25°C) 91°C<br />
HP-E200GL 200 15 (25°C) 107°C<br />
HP-E300GL 300 15 (25°C) 92°C<br />
HP-E30RI 35 10 (25°C) 90°C<br />
HP-E120RI 200 15 (25°C) 98°C<br />
HP-E300RI 300 15 (25°C) 83°C<br />
HP-E120WSI 120 18 (25°C) 125°C<br />
HP-E25D 25 10 (20°C) 45°C<br />
Epoxy Resin Systems<br />
application with brush / roller<br />
for casting thickness < 10mm<br />
low<br />
very<br />
transparent<br />
HP-E40D 40 10 (20°C) 50°C<br />
application with brush / roller<br />
medium<br />
very<br />
transparent<br />
HP-E25DM 25 10 (20°C) 69°C<br />
couloured, topcoat for ponds,<br />
pools and boats 2<br />
high<br />
(thixotropic)<br />
coloured<br />
HP-E30TDS 30 15 (20°C) 50°C<br />
embedding system,<br />
very transparent like water<br />
low<br />
transparent<br />
HP-E50GB 40 10 (20°C) 50°C<br />
embedding system,<br />
for casting thickness < 50mm<br />
very low<br />
transparent<br />
HP-E300GB 300 18 (20°C) 45°C<br />
slightly yellowish, electrical castings up<br />
to 48V, for casting thickness
Foundation / Primer for Epoxy Resins<br />
Properties:<br />
HP-UC-9004 is a two component polyurethane primer/adhesion for applications with epoxy resins. Especially<br />
suitable for smooth, non absorptive suboils (many plastics, glass, metals, tiles, …)<br />
Article: HP-UC-9003<br />
PUR-Primer<br />
Article: HP-UC-9004<br />
PUR-Primer<br />
Price €/pcs. incl. VAT net<br />
375 ml<br />
Basic price/ltr.<br />
750 ml<br />
Basic price/ltr.<br />
white<br />
black<br />
18,90 15,88<br />
50,40 42,35<br />
29,90 25,13<br />
39,87 33,51<br />
Features & Benefits:<br />
• PUR primer for sticking or laminating on smooth surfaces<br />
• high adhesion, suitable for all Epoxy Resins from HP-Textiles<br />
• black ground coat (primer for carbon design)<br />
• for spraying, manual application with a paint-brush or a roller is also<br />
possible<br />
• wax free, without styrene<br />
Not suitable for porous, mineral substrates (concrete, screed, …), PE, PP,<br />
PTFE, silicones or elastomers. Some of these plastics may have release<br />
agents on their surfaces (such as ABS). These release agents must be removed<br />
completely - every trace has negative effects regarding the adhesion!<br />
Epoxy Resin Systems<br />
Epoxy Priming Resin<br />
The epoxy system HP-E80FS is an unfilled, low viscous combination of resin and hardener with high adhesion to<br />
mineralized / porous foundations.<br />
Article: HP-E80FS<br />
Processing time 35min / low viscosity<br />
Price €<br />
(incl. hardener)<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4000 g<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
** Price for barrel upon request<br />
Features and Benefits:<br />
• For a better sealing in the pore of mineralized foundations approx.<br />
10% XB-thinner should be added.<br />
• Very good wetting<br />
• Causes tacky-free surface<br />
• Osmosis protection, filler for wooden porosities, water barrier layer<br />
• Primer / Adhesion Promoter for several surfaces:<br />
thermosetting plastics, GRP- or CRP-parts, (melamine) resin<br />
plates<br />
wood, glulam (timber), plywood (sev. kinds)<br />
concrete, brick wall, cement plaster or other surfaces /<br />
substrates<br />
• Corrosion Prevention for metal / aluminium (bare)<br />
• Further build-up with<br />
adhesives, laminating oder covering-resins (epoxy, polyester)<br />
paints (acrylic-, alkyd-, epoxy- or polyurethane-based)<br />
Product Properties: Resin Hardener Method<br />
HP-E80FS<br />
Colouring<br />
yellowish<br />
Mixing ratio (weight)<br />
weight 100 60<br />
Mixing ratio (volume)<br />
volume 100 68<br />
Mixed viscosity<br />
low viscosity<br />
Pot life (at 20°C) days<br />
35<br />
1<strong>02</strong><br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Epoxy Filler<br />
The epoxy filler HP-E30S is a filled two component combination of resin and hardener with fine extenders. This<br />
filler has very good adhesion to wood, steel, polyester and other surfaces. HP-E30S is solvent-free and therefore<br />
low unpleasant odour. Further more this epoxy filler is suitable for permanent immersion in (sea) water.<br />
Article: HP-E30S<br />
1kg<br />
Article: HP-E30S<br />
5kg<br />
Processing time 30min / pasty<br />
Processing time 30min / pasty<br />
Price €/roll incl. VAT net<br />
from 1 pcs.<br />
Basic price/kg<br />
from 5 pcs.<br />
Basic price/kg<br />
from 10 pcs.<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Price €/roll incl. VAT net<br />
from 1 pcs.<br />
Basic price/kg<br />
from 5 pcs.<br />
Basic price/kg<br />
from 10 pcs.<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
• Very good adhesion to wood, steel, polyester and other surfaces<br />
provided with suitable primers<br />
• Water vapour impermeable<br />
• Resistant to various chemicals<br />
• Among others, usable for osmosis treatment<br />
• Easy to sand<br />
• Semi-flexible<br />
• Suitable for permanent immersion in (sea) water<br />
• Dust dry after approx. 120min<br />
Epoxy Resin Systems<br />
Product Properties: Resin Hardener Method<br />
HP-E30S<br />
Colouring<br />
Mixing ratio<br />
Mixing ratio<br />
Mixed viscosity<br />
weight<br />
volume<br />
Light green - mat<br />
100 50<br />
100 50<br />
pasty<br />
Pot life (100g at 20°C) minutes<br />
Dust dry after (at 20°C) hours<br />
Recoating interval (at 20°C) hours<br />
30<br />
2<br />
48<br />
Processing temperature (minimal) °C<br />
15<br />
Density g/cm³ approx. 1,5 (mixed)<br />
Solid Content % approx. 100<br />
Flash Point (DIN 53213 °C<br />
> 100<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 103
Epoxy Adhesive System<br />
The Epoxy Adhesive Systems HP-E5K, HP-E60K and HP-E120K<br />
are an unfilled medium-viscous combination of resin and hardener.<br />
Features and Benefits:<br />
• Applicable for metal, wood, rubber, ceramics, rigid foams<br />
and many other plastic materials<br />
• Cold-hardening, workable at room-temperature<br />
• Possible to add fillers<br />
• Tough-hard formulation<br />
• Fast-setting epoxy for high-performance applications<br />
Epoxy Resin Systems<br />
Product Properties: Resin Hardener Method<br />
HP-E5K HP-E60K HP-E120K<br />
Mixing ratio<br />
weight 100 100 50 50<br />
Mixing ratio<br />
volumen 100 100 60 60<br />
Mixed viscosity<br />
medium viscous<br />
Pot life (at 20°C) minutes<br />
5 60 120<br />
Hand tight (at 20°C) minutes<br />
10<br />
Minimum hardening time (at 20°C) hours (h)<br />
2 24 24<br />
Processing temp. (optimum) °C<br />
15 - 25<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
7000-9500 9000-16000 150 - 350 ca. 15000 DIN 16945<br />
Data of Unreinforced Resin:<br />
(cured condition)<br />
Tensile strength<br />
Hardening 30min at 20°C<br />
mPa*s<br />
5<br />
DIN 53455<br />
Tensile strength<br />
Hardening 24h at 20°C<br />
mPa*s<br />
15<br />
Shear strength (steel)<br />
N/mm²<br />
19 25 DIN 53455<br />
Shear strength (ep-laminate)<br />
N/mm²<br />
20 DIN 53455<br />
Incipient crack (steel)<br />
N/mm<br />
4 - 7 4 - 7 DIN 53282<br />
E-Modulus<br />
kN/mm²<br />
2 - 5 2 - 4 DIN 53452<br />
Attention:<br />
Epoxy adhesives do not give off volatile components and therefore pressure onto the bonding while hardening is not<br />
necessary. Extensive bindings and parts that are under tension need as much pressure as there is enough contact between<br />
the parts that have to be adhered together. Extensive parts need to be fixed by the pressure.<br />
104<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Epoxy Adhesive System<br />
HP-E5K in an Double Syringe:<br />
Delivery includes:<br />
• 5 minutes-epoxy glue in a double syringe (29g)<br />
• 1x adapter / HP-L4001 (multiple applicable)<br />
• 1x mixing tube / HP-L40<strong>02</strong><br />
You can also order separately an adapter (Article: HP-<br />
L4001) and a mixing tube (Article: HP-L40<strong>02</strong>).<br />
Please have a look at page 192.<br />
Article: HP-E5K-0<strong>02</strong>9<br />
Double Syringe<br />
incl. adapter and mixing tube<br />
Price €<br />
(incl. hardener)<br />
from 1 pcs.<br />
Basic price/kg<br />
from 5 pcs.<br />
Basic price/kg<br />
from 10 pcs.<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Note:<br />
After use, the epoxy resin cures in the mixing tube so that a multiple use of the mixing tube is not possible. After the application<br />
DO NOT twist the mixing tube. DO NOT change the mixing tube until reuse!<br />
Article: HP-E5K<br />
Processing time 5min / medium viscous<br />
Price €<br />
(incl. hardener)<br />
200 g<br />
Basic price/kg<br />
500 g<br />
Basic price/kg<br />
1000 g<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Epoxy Resin Systems<br />
Article: HP-E120K<br />
Processing time 120min / medium viscous<br />
Article: HP-E60K<br />
Processing time 60min / medium viscous<br />
Price €<br />
(incl. hardener)<br />
incl. VAT<br />
net<br />
Price €<br />
(incl. hardener)<br />
incl. VAT<br />
net<br />
750 g<br />
Basic price/kg<br />
1500 g<br />
Basic price/kg<br />
7500 g<br />
Basic price/kg<br />
15 kg<br />
Basic price/kg<br />
45 kg<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
750 g<br />
Basic price/kg<br />
1500 g<br />
Basic price/kg<br />
7500 g<br />
Basic price/kg<br />
15 kg<br />
Basic price/kg<br />
45 kg<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
** Price for barrel upon request *** suitable outlet valves, see page 192<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 105
Epoxy Mould Covering Resin<br />
The epoxy resin system HP-E30FB is an aluminium-filled, high-viscous<br />
combination of resin and hardener with high abrasion resistance and<br />
processing time (pot life) of about 30 minutes.<br />
Features and Benefits:<br />
• High quality mould covering resin, aluminium-filled<br />
• Non-drip, without run-off on vertical surfaces, high thixotropic<br />
• Produced in vacuum therefore free of air bubbles<br />
• Coloured in deep black<br />
• For abrasion- and breaking resistance surfaces with good thermal conductivity<br />
• User friendly mixing ratios (100:10) (if necessary dilutable with XB-thinner)<br />
• Innovative formulation, free of DETA¹ with high styrene resistance*<br />
• For following layers wet-in-wet. Another option is to work with a dry-coupling layer.<br />
Epoxy Resin Systems<br />
Article: HP-E30FB<br />
Deep Black<br />
Price €<br />
(incl. hardener)<br />
1100 g<br />
Basic price/kg<br />
2750 g<br />
Basic price/kg<br />
5,5 kg<br />
Basic price/kg<br />
11 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Article: HP-E30FB-7031<br />
Blue-Grey<br />
Price €<br />
(incl. hardener)<br />
1100 g<br />
Basic price/kg<br />
2750 g<br />
Basic price/kg<br />
5,5 kg<br />
Basic price/kg<br />
11 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
33 kg<br />
Basic price/kg<br />
33 kg<br />
Basic price/kg<br />
** Price for barrel upon request<br />
106<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Product Properties: Resin Hardener Method<br />
HP-E30FB<br />
Colouring<br />
deep black or blue-grey<br />
Mixing ratio<br />
weight 100 10<br />
Mixed viscosity<br />
(at 20°C)<br />
Pot life (at 20°C) minutes<br />
30<br />
Demouldable after<br />
hours<br />
24<br />
Processing temperature (optimum) °C<br />
20 - 25<br />
Processing temperature (minimum) °C<br />
15- 25<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
ca. 8000 200 HP.01.003<br />
Data of Unreinforced Resin:<br />
Tensile strength<br />
Hardness<br />
Density<br />
N/mm²<br />
Shore D<br />
g/cm³<br />
(cured condition)<br />
50 HP.01.004<br />
85 HP.01.009<br />
1,2 HP.01.0<strong>02</strong><br />
Thermal stability °C 115 (after tempering)<br />
*Styrene resistance:<br />
After tempering / post-curing (15h/60° and 6h/80°C) there is no significant loading in styrene. Measuring was in<br />
pure styre for 168h at 20°C.<br />
¹ DETA = Diethylentriamine.<br />
Component in simple formulations. Even minor variations (resin : hardener ratio, airhumidity,...) may cause<br />
to “greasy”, hygroscopic surfaces.<br />
Epoxy Resin Systems<br />
INSTRUCTION: MOLD CONSTRUCTION WITH HP-E30FB<br />
In our download portal you will find the following working instructions:<br />
„Mold making with fiber composites<br />
- The production of multi-part molds with parting planes - „<br />
You can easily reach the work instructions via the following QR<br />
code or via our online shop www.hp-textiles.com/shop under<br />
the heading Downloads.<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 107
Standard Laminating Resin<br />
The Epoxy-Systems HP-E28L, HP-E55L and HP-E110L are unfilled, low viscous 2-component combinations of<br />
resin and hardeners with various processing times between 28 - 110 minutes.<br />
These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.<br />
Note:<br />
The resin components of HP-E28L, HP-E55L and HP-E110L are identical.<br />
Furthermore, the hardeners are mixable among themselves.<br />
HP-E28L, HP-E55L and HP-E110L are free of Nonylphenol and DETA.<br />
Epoxy Resin Systems<br />
Features:<br />
• Very good wetting properties of the reinforcing fibres<br />
• Cold setting, de-mouldable at room temperature<br />
• Free of solvents and fillers<br />
• Improved physiological compatibility (no R62 labelling)<br />
• Practically shrink-free curing<br />
• Temperature resistance (Tg Max) up to 81°C (HP-E55L)<br />
Fields of Application:<br />
As impregnating and laminating resins in the areas of<br />
• Mould-making and fixture construction, Industrial parts<br />
• Construction of sports equipment, model making<br />
• Orthopaedic<br />
• Vehicle substructures / motorsport<br />
• Boat construction<br />
© Manufaktur MasterArtHelis<br />
www.masterart-helis.de<br />
108<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Standard Laminating Resin<br />
Product Properties: Resin Hardener Method<br />
HP-E28L HP-E55L HP-E110L<br />
Colouring<br />
Slightly bluish / green<br />
Mixing ratio<br />
weight 100 40<br />
Mixing ratio<br />
volumen 100 44<br />
Mixed viscosity minutes low viscous<br />
Pot life (at 20°C) minutes<br />
28 55 110<br />
Demouldable after (at 20°C) hours (h)<br />
28 36 56<br />
Demouldable after (at 40°C) hours (h)<br />
6 - 7 8 10<br />
Processing temperature optimal °C<br />
15 - 25 20 - 25 20 - 25<br />
Processing temperature minimal °C<br />
15 18 18<br />
Physical Data:<br />
Viscosity (at 25°C)<br />
mPa s<br />
Density (at 20°C)<br />
g/cm³<br />
(NH)-equivalent<br />
g/EQ<br />
Epoxy-equivalent<br />
g/EQ<br />
Data of Unreinforced Resin:<br />
Tensile strength<br />
N/mm²<br />
Elongation %<br />
Flexural strength<br />
MPa<br />
E-Modulus (bending test)<br />
GPa<br />
Hardness (tempering 2h/120°C) Shore D<br />
Glass transition temperature Tgmax °C<br />
600 - 900 200 - 300 50 - 100 40 - 90 HP.07.0003<br />
1,1 - 1,15 0,96 - 1,04 HM.07.00<strong>02</strong><br />
68 - 70 HM.07.0014<br />
185 - 200 HM.07.0013<br />
(cured condition)<br />
60 - 70 55 HM.07.0004<br />
3 - 5 4 - 5 2 - 3 HM.07.0004<br />
100 - 110 HM.07.0005<br />
3 3,1 HM.07.0004<br />
83 85 HP04.07<br />
75 81 75 HP04.08<br />
Epoxy Resin Systems<br />
HP-E28L<br />
HP-E55L<br />
Price €<br />
(incl. hardener)<br />
700 g<br />
Basic price/kg<br />
1400 g<br />
Basic price/kg<br />
2800 g<br />
Basic price/kg<br />
7 kg<br />
Basic price/kg<br />
28 kg<br />
Basic price/kg<br />
42 kg<br />
Basic price/kg<br />
Processing time 28min<br />
Processing time 55min<br />
HP-E110L Processing time 110min<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
** Price for barrel upon request *** suitable outlet valves, see page 192<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 109
High Strength Thermosetting Resin<br />
The Epoxy-Systems HP-E29L, HP-E56L and HP-E111L are unfilled, low viscous 2-component combinations of<br />
resin and hardeners with various processing times between 25 - 110 minutes. Compared to standard resins our<br />
high performance resins show faster curing processes.<br />
The laminates have distinctive static and dynamic strengths and a higher temperature resistance.<br />
Of course it is possible to add filling materials like microballoons, cotton flocks, thixotrophypowder or colour pigments<br />
from HP-Textiles.<br />
A combination with suitable gelcoats, based on polyester, polyurethane and epoxy, is achievable as well.<br />
Note:<br />
The resin components of HP-E29L, HP-E56L and HP-E111L are identical.<br />
Furthermore, the hardeners are mixable among themselves.<br />
HP-E29L, HP-E56L und HP-E111L are free of Nonylphenol and DETA.<br />
Features:<br />
Epoxy Resin Systems<br />
• Very good wetting properties of the reinforcing fibres<br />
• Cold setting, demouldable at room temperature<br />
• Free of solvents and fillers<br />
• Improved physiological compatibility (no R62 labelling)<br />
• Practically shrink-free curing<br />
• Temperature resistance (Tg Max) up to 93°C (HP-E29L)<br />
• Special formulation supports faster curing and increased strength, especially at higher temperatures<br />
• Individual colouring is available upon request<br />
• Excellent adhesion to the In-Mould Coating of HP-Textiles<br />
• In total better characteristic values of approx. 10% (Tg MAX, tensile strength etc.) than those of<br />
standard systems!<br />
Fields of Application:<br />
As impregnating and laminating resins in the areas of<br />
• Mould-making and fixture construction, industrial parts<br />
• Construction of sports equipment, model making<br />
• Orthopaedic<br />
• Vehicle substructures / motorsport<br />
• Boat construction<br />
• Aircraft construction (ultralight aviation)<br />
The mechanical properties are verified by independent<br />
departments like the University of<br />
Applied Sciences in Osnabrück / Lower Saxony,<br />
Germany.<br />
110<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
High Strength Thermosetting Resin<br />
Product Properties: Resin Hardener Method<br />
HP-E29L HP-E56L HP-E111L<br />
Colouring colourless light blue-green<br />
Mixing ratio<br />
weight 100 40<br />
Mixing ratio<br />
volumen 100 44<br />
Mixed viscosity minutes low viscous<br />
Pot life (at 20°C) minutes<br />
25 55 110<br />
Demouldable after (at 20°C) hours (h)<br />
24 30 48<br />
Demouldable after (at 40°C) hours (h)<br />
6 7 9<br />
Processing temperature optimum °C<br />
15 - 25 20 - 25 20 - 30<br />
Processing temperature minimum °C<br />
15 18 20<br />
Physical Data:<br />
Viscosity (at 25°C) mPa s<br />
Density (at 20°C) g/cm³<br />
(NH)-Equivalent<br />
g/EQ<br />
Epoxy-Equivalent<br />
g/EQ<br />
Data of Unreinforced Resin:<br />
Tensile strength<br />
N/mm²<br />
Elongation %<br />
Flexural strength<br />
N/mm²<br />
E-Modulus (bending test)<br />
kN/mm²<br />
Hardness (after curing 2h/120°C) Shore D<br />
Glass transition temperature Tgmax °C<br />
600 - 900 100 - 200 HP.07.0003<br />
1,1 - 1,15 0,96 - 1,04 HM.07.00<strong>02</strong><br />
66 HM.07.0014<br />
160 - 176 HM.07.0013<br />
(cured condition)<br />
70 - 75 70 68 HM.07.0004<br />
3 - 5 HM.07.0004<br />
100 - 110 100 - 110 k.A. HM.07.0005<br />
> 3 HM.07.0004<br />
86 87 HP04.07<br />
93 91 79 HP04.08<br />
Epoxy Resin Systems<br />
HP-E29L<br />
HP-E56L<br />
Price €<br />
(incl. hardener)<br />
1400 g<br />
Basic price/kg<br />
2800 g<br />
Basic price/kg<br />
7 kg<br />
Basic price/kg<br />
28 kg<br />
Basic price/kg<br />
42 kg<br />
Basic price/kg<br />
Processing time 25min<br />
Processing time 55min<br />
HP-E111L Processing time 110min<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
** Price for barrel upon request *** suitable outlet valves, see page 192<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 111
Multi-purpose Resin Systems<br />
The Epoxy Laminating Resin Systems HP-E25KL and HP-E45KL are unfilled,<br />
medium-viscous, chemical resistant combinations of resin and hardener with<br />
short or medium processing time (pot life).<br />
They can be used as general-purpose systems for many applications:<br />
as Laminating Resin:<br />
• Excellent wet-out of fibreglass, carbon and<br />
aramid fibres<br />
• Cold-hardening, medium-viscosity,<br />
HP-E25KL: used from 5°C<br />
as Mould Resin:<br />
• Usable as mould making resin<br />
(mixable with colour pigments)<br />
• For coupling-layers (with fillers)<br />
as Covering Layer Resin:<br />
as Adhesive Resin or basic for Fillers:<br />
Epoxy Resin Systems<br />
• Clear, tack-free surface<br />
• Usable for repairs / refit of osmosis damages<br />
• High resistance to many chemicals<br />
such as styrene, fuels, ...<br />
• Therefore, they can be used for coatings in tanks,<br />
pipelines, ponds and terrariums<br />
• Due to a good adhesion for bonding / fillers<br />
can be added<br />
(e.g. combination of HP-PK22 and HP-BF1)<br />
The special formulation allows the usage under difficult conditions (low temperatures, air humidity).<br />
HP-E25KL / HP-E45KL are also free of nonylphenol and contain no reactive diluents!<br />
Please note:<br />
HP-E25KL and HP-E45KL come with a similar resin.<br />
Both hardeners can be mixed among themselves.<br />
112<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Multi-purpose Resin System - medium viscous-<br />
Product Properties: Resin Hardener Method<br />
HP-E25KL HP-E45KL<br />
Colouring colourless light blue-green<br />
Mixing ratio<br />
weight 100 60<br />
Mixing ratio<br />
volumen 100 70<br />
Mixed viscosity (at 20°C) mPa s 2500 - 3500 (medium viscous)<br />
Mixed viscosity (at 25°C) mPa s 1400 - 1800 (medium viscous)<br />
Pot life (at 20°C) minutes<br />
25 45<br />
Demouldable after<br />
h<br />
Multi-purpose Resin System - low viscous-<br />
The epoxy resin multi-purpose systems HP-E25L and HP-E45L are unfilled,<br />
low viscous 2 components combinations of resin and hardener with a working<br />
time of approx. 25 / 45 min for laminate, top coat, adhesive, spatula and mould<br />
making applications.<br />
Product Properties: Resin Hardener Method<br />
HP-E25L HP-E45L<br />
Mixing ratio<br />
weight 100 60<br />
Mixing ratio<br />
volumen 100 66<br />
Mixed viscosity<br />
low viscous<br />
Pot life (at 20°C) minutes<br />
25 45<br />
Demouldable after<br />
h<br />
48<br />
Processing temperature (optimum) °C<br />
7<br />
Processing temperature (minimum) °C<br />
15 - 25<br />
minimal 5°C<br />
18 - 25<br />
Epoxy Resin Systems<br />
Physical Data:<br />
Viscosity (at 25°C) mPa s<br />
Data of Unreinforced Resin:<br />
Tensile strength<br />
N/mm²<br />
Elongation %<br />
Flexural strength<br />
N/mm²<br />
E-Modulus<br />
kN/mm²<br />
700-1100 600 - 800 290 - 450 PM.01.003<br />
(cured condition)<br />
45 - 55 40 - 45 PM.01.004<br />
3 - 4 PM.01.004<br />
80 - 85 70 - 80 PM.01.005<br />
2,5 - 3 PM.01.005<br />
HP-E25L Processing time 25min HP-E45L Processing time 45min<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
** Price for barrel upon request *** suitable outlet valves, see page 192<br />
114<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
High Heat Resistant Epoxy System<br />
The Epoxy System HP-E120WSM is an unfilled, medium viscous, 2-component combination of resin and hardener.<br />
It can be used as a laminating resin system for a high temperature stabilities.<br />
Features and Benefits:<br />
• very good wetting of the reinforcement fiber<br />
• high static and dynamic strength<br />
• very good dimensional stability under heat up to 150°C<br />
• good resistance to fuels<br />
• hot curing, post cure is necessary<br />
• colourless, clear<br />
• special laminating- and multipurpose resin<br />
• building of high heat resistant components<br />
• usable for mould and tool making<br />
• production of composites made of glass-,<br />
carbon- or aramid fabrics<br />
• optical application such as visible carbon parts<br />
Product Properties: Resin Hardener Method<br />
Mixing ratio<br />
weight<br />
HP-E120WSM<br />
Mixed viscosity (at 20°C) medium viscous<br />
Pot life (at 20°C) minutes<br />
Pot life (at 25°C) minutes<br />
Post cure °C 24h / 20°C // 5h / 60°C // 6h / 80°C //<br />
2h / 120°C<br />
rise of temperatur 20°C /h<br />
* extra curing 2h / 160°C<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
100 26<br />
120<br />
80<br />
8000-9000 40-60 PM.01.003<br />
Epoxy Resin Systems<br />
Data of Unreinforced Resin:<br />
Tensile strength<br />
N/mm²<br />
Hardness<br />
Shore D<br />
Density<br />
g/cm³<br />
Thermal stability °C<br />
(cured condition)<br />
75 PM.01.004<br />
86 D PM.01.009<br />
1,1 PM.01.0<strong>02</strong><br />
150 PM.01.011 *<br />
Article: HP-E120WSM<br />
Processing time 120min / medium viscous<br />
Price €<br />
(incl. hardener)<br />
315 g<br />
Basic price/kg<br />
3150 g<br />
Basic price/kg<br />
10,08 kg LQ<br />
Basic price/kg<br />
37,8 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 115
Covering and Laminating Epoxy-System<br />
The Epoxy-System HP-E30TLS is an unfilled two-component combination of resin and hardener with medium<br />
working time (pot life). It is versatile for surface coatings and laminating.<br />
Features and Benefits:<br />
• good wet-out of reinforcement fibres<br />
• very good mechanical and chemical properties<br />
• Universally suitable for pre-sealing or / and laminating of fibre reinforced<br />
surface coating in system configuration between primer (HP-E80FS) and<br />
topcoat (HP-E30TDS)<br />
• Completely free of solvents, therefore<br />
- direct working on PU- or PS/EPS foam is possible<br />
- suitable for indoor use (fish ponds, pools, tanks,…)<br />
Epoxy Resin Systems<br />
• Using for tough, high quality, fibre reinforced coatings in following:<br />
- outdoor AND INDOOR swimming pools, water tanks, fish and aquaculture ponds<br />
- roofs and rooftops<br />
- balcony sealing<br />
- agricultural and industrial coantings<br />
For best results, we recommend a finish with a suitable epoxy-topcoat (like HP-E30TDS)!<br />
Product Properties: Resin Hardener Method<br />
HP-E30TLS<br />
Mixing ratio<br />
weight 100 60<br />
Mixed viscosity (at 20°C) low viscous<br />
Pot life (at 20°C) minutes<br />
30<br />
Walkable after (at 20°C) hours<br />
24<br />
Walkable after (at 15°C) hours<br />
48<br />
Processing temperature (optimum) °C<br />
20 - 25<br />
Processing temperature (minimum) °C<br />
15<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
600 - 900 300 - 400 DIN 16945<br />
Data of Unreinforced Resin:<br />
Tensile strength<br />
N/mm²<br />
Elongation %<br />
Flexural strength<br />
N/mm²<br />
E-Modulus<br />
kN/mm²<br />
Temperature resistance (Tg MAX) °C<br />
(cured condition)<br />
40 DIN 53455<br />
4 DIN 53455<br />
75 DIN 53455<br />
2,75 DIN 53455<br />
50 HP04.08<br />
Specifications after hardening 7d at 23C.<br />
116<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Covering and Laminating Epoxy-System<br />
User-friendly packaging units:<br />
+ Ready to mix, no weighing necessary<br />
+ Hardener drains completely into the resin and mixed there<br />
Article: HP-E30TLS-1.4 Article: HP-E30TLS-3<br />
Processing time 30min / low viscous<br />
Unit of quantity: 1 bundle = 1400 g<br />
Processing time 30min / low viscous<br />
Unit of quantity: 1 bundle = 3000 g<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 2 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 2 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Dispatch by Parcel Service<br />
Dispatch by forwarding agency<br />
For Self-Dosage:<br />
+ Partial taking out is possible<br />
Article: HP-E30TLS<br />
Processing time 30min / low viscous<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Epoxy Resin Systems<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
Dispatch by Parcel Service<br />
Video: „ROOF COATING“<br />
Please find a video with more information about „Roof Coating“ on our<br />
website.<br />
Please use this QR-Code to get to the video or visit our website<br />
www.hp-textiles.com (category“service“).<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 117
Resin System - Statement of Approval of the German Lloyd<br />
The whole system has a statement of approval of the German Lloyd for the building of boats and wind-driven<br />
power stations. (Approval No. WP 1220047 HH)<br />
The basis of the series HP-E3000GL is an unfilled Epoxy-Resin, which is mixable with different hardeners for<br />
every individual purpose. A special feature of this series is a high initial glass transition temperature (Tg) by hardening<br />
at room temperature.<br />
The use of the hardener HP-E200GL increases the maximum glass transition temperature (Tg MAX) up to 107°C.<br />
The series also has a high transparency, so that it is very suitable for visible carbon parts.<br />
Features and Benefits:<br />
Fields of Application:<br />
Epoxy Resin Systems<br />
• Extremely low viscosity, so it has a very good<br />
fibre wet-out<br />
• High static and dynamic strength<br />
• Pot life time can be freely adjusted between<br />
15 min hardener (HP-E15GL) and 300 min<br />
(hardener HP-E300GL)<br />
• Glass transition temperature (Tg max) up to<br />
107 °C (hardener HP-E200GL)<br />
• Vacuum-infusion methods (IMC/MTI, RI, VARI,<br />
SCRIMP ® )<br />
• Pressure injection methods (RTM, RIM)<br />
• Filament winding<br />
• Hand laminating<br />
• Building of boats and wind-driven power stations<br />
• Optical application such as visible carbon parts<br />
(HP-E200GL)<br />
Product Properties: Resin Hardener Method<br />
HE3000GL HTE15GL HTE200GL HTE300GL<br />
Colour colourless yellowish colourless, clear<br />
Colour<br />
Mixing ratio<br />
gardner<br />
weight<br />
Pot life (at 20°C) minutes<br />
Processing temperature optimum °C<br />
- short pot life<br />
- for low processing<br />
temperatures<br />
- higher Tg<br />
- colourless<br />
- carbonlook<br />
- long pot life<br />
- for infusion /<br />
injection<br />
< 1 < 5 < 1 < 1<br />
100 30 30 30<br />
15 200 300<br />
20 - 25 20 - 30 20 - 30<br />
Physical Data:<br />
Viscosity (at 25°C) mPa s<br />
600 - 900 20 - 30 40 - 60 8 - 13 PM.01.003<br />
Data of unreinforced Resin:<br />
(cured condition)<br />
Density (at 25°C) g/cm³ 1.14 - 1.16 1,16 1,16 1,16 ISO1183-A<br />
Tensile strength<br />
mPa<br />
72 82 69 ISO 527<br />
Elongation %<br />
5,1 6,9 7,8 ISO 527<br />
Flexural strength<br />
mPa<br />
1<strong>02</strong> 106 106 ISO 178<br />
E-Modulus<br />
kN/mm²<br />
2.800 2.830 2.950 ISO 178<br />
Glass transition temperature °C<br />
91 107 92 HP04.08<br />
Hardness Shore D 83 83 83 after Temp.<br />
Data of unfilled samples. Curing schedule with hardener :<br />
HP-E30RI h at °C 5h/60°C and 6h/80°C<br />
HP-E300RI h at °C 5h/60°C and 6h/80°C<br />
HP-E120RI h at °C 5h/60°C and 6h/80°C (and for Tg max. 2h/120°C)<br />
118<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Resin System - Statement of Approval of the German Lloyd<br />
The whole system has a statement of approval of the<br />
Germanischer Lloyd for the building of boats and<br />
wind-driven power stations.<br />
Article: HP-HTE15GL HARDENER<br />
Processing time approx. 15min. (at 20°C)<br />
Quantity incl. VAT € net €<br />
0,75 kg<br />
Basic price/kg<br />
2,4 kg<br />
Basic price/kg<br />
9 kg<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
25 kg<br />
Basic price/kg<br />
50 kg<br />
Basic price/kg<br />
Article: HP-HE3000GL<br />
Quantity<br />
0,75 kg<br />
Basic price/kg<br />
2,4 kg<br />
Basic price/kg<br />
9 kg<br />
Basic price/kg<br />
25 kg<br />
Basic price/kg<br />
required<br />
amount of<br />
hardener<br />
RESIN<br />
incl. VAT net €<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
15 min<br />
200 min<br />
Article: HP-HTE200GL HARDENER<br />
Processing time approx. 200min. (at 20°C)<br />
Quantity incl. VAT € net €<br />
0,75 kg<br />
Basic price/kg<br />
2,4 kg<br />
Basic price/kg<br />
9 kg<br />
Basic price/kg<br />
25 kg<br />
Basic price/kg<br />
50 kg<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Epoxy Resin Systems<br />
*** suitable outlet valves, see page 192<br />
300 min<br />
Article: HP-HTE300GL HARDENER<br />
Processing time approx. 300min. (at 20°C)<br />
Quantity incl. VAT € net €<br />
0,75 kg<br />
Basic price/kg<br />
2,4 kg<br />
Basic price/kg<br />
9 kg<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
25 kg<br />
Basic price/kg<br />
50 kg<br />
Basic price/kg<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 119
Injection-Resin / Laminating Resin<br />
The Base of the series HP-E3000RI is an unfilled Epoxy-Resin, which is mixable<br />
with different hardeners for several applications.<br />
The hardeners HP-E30RI and HP-E300RI allow pot-life times between 30<br />
and 300 minutes.<br />
Furthermore, the special hardener HP-E120RI provides higher temperature<br />
stabilities.<br />
The injection- / infusion-resins of the series HP-E3000RI show very low viscosities, what supports excellent wetout<br />
and flow properties. The series is usable for hand-laminating, too.<br />
Features and Benefits:<br />
Epoxy Resin Systems<br />
• Excellent wet-out in infusion- or injection-processes<br />
• Warm-hardening, demouldable at higher temperature<br />
• High dynamic and static strength<br />
• Usable for RTM / RI - process<br />
• For application in modelmaking, automotive-industry and building<br />
of boats and rotor blades<br />
• Glass transition temperature 98 °C (with hardener HP-E120RI)<br />
• With thixotroping agent HP-PK22 applicable for hand-laminating<br />
1) Expected values. Will be substituted by external<br />
laboratory after validation.<br />
According to DIN EN ISO 527.<br />
Product Properties: Resin Hardener Method<br />
HE3000RI HTE30RI HTE120RI HTE300RI<br />
Colour colourless colourless / slightly amber<br />
Colour<br />
Mixing ratio<br />
gardner<br />
weight<br />
Pot life (at 20°C) minutes<br />
Processing temperature optimum °C<br />
< 2 < 2<br />
100 30<br />
35 200 300<br />
20 - 25 20 - 30 20 - 30<br />
Physical Data:<br />
Viscosity (at 25°C) mPa s<br />
600 - 900 30 - 50 40 - 60 8 - 13 PM.01.003<br />
Data of unreinforced Resin: 1 )<br />
Density (at 25°C) g/cm³<br />
Tensile strength<br />
mPa<br />
Elongation %<br />
Flexural strength<br />
mPa<br />
E-Modulus<br />
kN/mm²<br />
Glass transition temperature °C<br />
Hardness<br />
Shore D<br />
(cured condition)<br />
1.1 1.1. 1.1 PM.01.0<strong>02</strong><br />
72 71 72 PM.01.004<br />
4 - 5 4 - 5 5 - 6 PM.01.004<br />
110 110 110 PM.01.005<br />
3 2.9 3 PM.01.004<br />
90 98 83 PM.01.011<br />
82 83 83 PM.01.009<br />
Data of unfilled samples. Curing schedule with hardener :<br />
HP-E30RI h at °C 24h/20°C, and 5h/60°C and 6h/80°C<br />
HP-E300RI h at °C 24h/20°C, and 5h/60°C and 6h/80°C<br />
HP-E120RI h at °C 24h/20°C, and 5/60°C und 6h/80°C and 2h/120°C<br />
120<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Injection-Resin / Laminating Resin<br />
This Infusion Resin HP-E300RI was developed in cooperation<br />
with the University of Osnabrück and tested<br />
by the Ignition Racing Team of the Hochschule Osnabrück.<br />
It was used among other materials for the construction of<br />
the vehicle (carbon fibre monocoque) of the Formula Student.<br />
Article: HP-HTE30RI HARDENER<br />
Processing time approx. 30min. (at 20°C)<br />
Quantity incl. VAT € net €<br />
0,75 kg<br />
Basic price/kg<br />
2,4 kg<br />
Basic price/kg<br />
9 kg<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
25 kg<br />
Basic price/kg<br />
50 kg<br />
Basic price/kg<br />
Article: HP-HE3000RI<br />
Quantity<br />
0,75 kg<br />
Basic price/kg<br />
2,4 kg<br />
Basic price/kg<br />
9 kg<br />
Basic price/kg<br />
25 kg<br />
Basic price/kg<br />
required<br />
amount of<br />
hardener<br />
incl. VAT net €<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
RESIN<br />
30 min<br />
200 min<br />
Article: HP-HTE120RI HARDENER<br />
Processing time approx. 200min. (at 20°C)<br />
Quantity incl. VAT € net €<br />
0,75 kg<br />
Basic price/kg<br />
2,4 kg<br />
Basic price/kg<br />
9 kg<br />
Basic price/kg<br />
25 kg<br />
Basic price/kg<br />
50 kg<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Epoxy Resin Systems<br />
*** suitable outlet valves, see page 192<br />
300 min<br />
Article: HP-HTE300RI HARDENER<br />
Processing time approx. 300min. (at 20°C)<br />
Quantity incl. VAT € net €<br />
0,75 kg<br />
Basic price/kg<br />
2,4 kg<br />
Basic price/kg<br />
9 kg<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
25 kg<br />
Basic price/kg<br />
* Formula student car ”IRTe16“ HS Osnabrück<br />
50 kg<br />
Basic price/kg<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 121
High Heat Resistant Epoxy System<br />
The Epoxy System HP-E120WSI is an unfilled, low viscous, 2-component combination of resin and hardener.<br />
It can be used as a laminating and vacuum-infusion resin system for a high temperature stabilities.<br />
Features and Benefits:<br />
• very low viscosity, excellent fibre wet-out and<br />
flow properties<br />
• high static and dynamic strength<br />
• very good dimensional stability under heat<br />
up to 125°C<br />
• hot curing, post cure is necessary<br />
• usable as a laminating and vacuum-infusion<br />
resin (IMC/MTI, RI, VARI,…)<br />
• building of high heat resistant components<br />
• production of composites made of glass-, carbon<br />
- or aramid fabrics<br />
• optical application such as visible carbon parts<br />
• colourless, clear<br />
Epoxy Resin Systems<br />
Product Properties: Resin Hardener Method<br />
Mixing ratio<br />
weight<br />
HP-E120WSI<br />
Mixed viscosity (at 20°C) low viscous<br />
Pot life (at 20°C) minutes<br />
Pot life (at 25°C) minutes<br />
Post cure °C 24h / 20°C // 5h / 60°C // 6h / 80°C //<br />
2h / 120°C<br />
rise of temperatur 20°C /h<br />
* extra curing 2h / 160°C<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
100 26<br />
120<br />
80<br />
600-800 40-60 PM.01.003<br />
Data of Unreinforced Resin:<br />
Tensile strength<br />
N/mm²<br />
Hardness<br />
Shore D<br />
Density<br />
g/cm³<br />
Thermal stability °C<br />
(cured condition)<br />
75 PM.01.004<br />
86 D PM.01.009<br />
1,1 PM.01.0<strong>02</strong><br />
125 PM.01.011 *<br />
Article: HP-E120WSM<br />
Processing time 120min / low viscous<br />
Price €<br />
(incl. hardener)<br />
315 g<br />
Basic price/kg<br />
3150 g<br />
Basic price/kg<br />
10,08 kg LQ<br />
Basic price/kg<br />
37,8 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
122<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Covering Resin System<br />
The Epoxy Topcoat Systems HP-E25D, HP-E40D and HP-E25DM are unfilled,<br />
low-viscous combinations of resin and hardener with higher UV-resistance.<br />
Features and Benefits:<br />
As laminating and covering resins:<br />
• high resistance to UV radiation, non-yellowing<br />
• good wet-out of reinforcement fibres<br />
• create bright, non-gluey (tacky-free) surfaces and casts; suitable for carbon-look laminates<br />
(observe Tg MAX)<br />
• cold-hardening, applicable from 10°C<br />
E25D:<br />
- epoxy-topcoat, for transparent coatings, low-viscous<br />
E25DM:<br />
- base for epoxy-gelcoats, first (fine) resin layer in negative moulds, therefore medium-viscosity.<br />
The necessary thixotropy can be achieved by adding 3-4% by weight of PK22.<br />
E40D:<br />
- Transparent coatings or castings up to 10mm layer-thickness<br />
- Suitable for creating indoor stone carpets<br />
Product Properties: Resin Hardener Method<br />
HP-E25D HP-E40D HP-E25DM HP-E25D HP-E40D HP-E25DM<br />
Chemical nature<br />
Bisphenol / Epichlorhydrin resin<br />
Colouring<br />
without colour / transparent<br />
Mixing ratio (at 20°C) weight<br />
100 60 50 60<br />
Mixing ratio (at 20°C) volume<br />
100 64 57 66<br />
Mixed viscosity low viscous medium viscous<br />
Pot life (at 20°C) minutes<br />
25 40 25<br />
Walkable (Shore D 40 after) h<br />
12 15 8<br />
Processing temperature (minimum) °C<br />
10<br />
Epoxy Resin Systems<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
700 - 1100 7000-9500 400 - 700 50 - 150 400 - 700 DIN 16945<br />
Data of Unreinforced Resin:<br />
Tensile strength<br />
N/mm²<br />
Elongation %<br />
Flexural strength<br />
N/mm²<br />
E-Modulus<br />
kN/mm²<br />
Glass transition temperature Tg MAX %<br />
(cured condition)<br />
55 43 65 HM.07.0004<br />
7 4 5 HM.07.0004<br />
75 90 HM.07.0004<br />
3 HM.07.0004<br />
47 50 67 HP 04.08<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 123
Covering Resin System<br />
Article: HP-E25D<br />
Processing time 25min / low viscous<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Epoxy Resin Systems<br />
48 kg<br />
Basic price/kg<br />
Article: HP-E40D<br />
Processing time 40min / low viscous<br />
Price €<br />
(incl. hardener)<br />
750 g<br />
Basic price/kg<br />
1500 g<br />
Basic price/kg<br />
3000 g<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Article: HP-E25DM<br />
Processing time 25min / medium viscous<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
7,5 kg<br />
Basic price/kg<br />
12 kg<br />
Basic price/kg<br />
37,5 kg<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
** Price per barrel upon request *** suitable outlet valves, see page 192<br />
For maximum UV-stability, we recommend an additional coating with a clear varnish (e.g. HP-PUR). Also the long<br />
term UV-resistance can be improved by adding HP-BEL91 (in epoxy and in varnish) distinctly! All Gelcoats and<br />
Topcoats can be coloured with dry pigments and colour pastes. As an alternative HP-Textiles also offers coloured<br />
epoxy-topcoats!<br />
124<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Coating and Laminating Epoxy-System<br />
The Epoxy-System HP-E30TDS is a filled and thixotropic two-component combination of resin and hardener with<br />
medium working time (pot life). It is versatile for high quality surface coatings.<br />
Features and Benefits:<br />
• sealing for wood, metal, several plastics (especially frp), screed and concrete<br />
• very good adhesive properties, high abrasion-reasistance<br />
• very high chemical and mechanical resistance<br />
• distinct osmosis protection<br />
• free of solvents, can be thinned with HP-XB if demanded (maximum up to 5%)<br />
• Used as high quality surface coating in following areas:<br />
- boatbuilding (especially for osmosis protection underwater)<br />
- outdoor and indoor swimming pools, water tanks, fish and aquaculture ponds<br />
- roofs and rooftops<br />
- balcony sealing<br />
- agricultural and industrial coantings<br />
- as surface for low temperature moulds (< 50°C)<br />
Available in several colours.<br />
By adding the colour paste HP-FP (page 165) it is colour-adjustable!<br />
In order to achieve best results we recommend the use in combination with our primer / sealer (HP-E80FS) and<br />
/ or laminating resin (HP-E30TLS).<br />
Product Properties: Resin Hardener Method<br />
Mixing ratio<br />
Mixed viscosity<br />
(at 20°C)<br />
weight<br />
Pot life (at 20°C) minutes<br />
Walkable after (at 20°C) hours<br />
Walkable after (at 15°C) hours<br />
Processing temperature (optimum) °C<br />
Processing temperature (minimum) °C<br />
HP-E30TDS<br />
100 53<br />
30<br />
24<br />
48<br />
20 - 25<br />
15<br />
Epoxy Resin Systems<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
300 - 400 DIN 16945<br />
Data of Unreinforced Resin:<br />
Tensile strength<br />
N/mm²<br />
Elongation %<br />
Flexural strength<br />
N/mm²<br />
E-Modulus<br />
kN/mm²<br />
Temperature resistance (Tg MAX) °C<br />
(cured condition)<br />
40 DIN 53455<br />
4 DIN 53455<br />
75 DIN 53455<br />
2,75 DIN 53455<br />
50 HP04.08<br />
Specifications after hardening 7d at 23C.<br />
** The epoxi system HP-E30TDS has a low yellowing potential. Under UV, chlorine and weather conditions (such as increased outside temperatures)<br />
are epoxy resins generally not completely color-stable over the long term. **<br />
** To increase the color stability, we recommend using an additional transparent topcoat HP-E30TDS-0000 incl. Approx. 3% UV stabilizer<br />
HP-BEL91 (page 183). These products can be ordered optionally.**<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 125
Surface and Covering Epoxy-System<br />
Covering System:<br />
Article: HP-E30TDS<br />
Processing time 30min / thixotrop<br />
Colour: Clear<br />
Available in several colours or transparent, adjustable with colour<br />
paste HP-FP to RAL (page 165)<br />
To increase color stability, we recommend the addition of our<br />
UV-Absorber HP-BEL91 (page 183)<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
industrial coatings<br />
Epoxy Resin Systems<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
Dispatch by Parcel Service<br />
agricultural coatings<br />
Article: HP-E30TDS-1.5<br />
Processing time 30min / thixotrop<br />
Unit of quantity: 1 bundle = 1500 g<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 3 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
Article: HP-E30TDS-3.3<br />
Processing time 30min / thixotrop<br />
Unit of quantity: 1 bundle = 3300 g<br />
Colour: RAL 5012 = light blue Colour: RAL 5012 = light blue<br />
RAL 7015 = anthracite grey RAL 7015 = anthracite grey<br />
RAL 7035 = light grey RAL 7035 = light grey<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 3 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
126<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Surface and Covering Epoxy-System<br />
Covering System:<br />
Article: HP-E30TDS-1.5<br />
Article: HP-E30TDS-3.3<br />
Processing time 30min / thixotrop<br />
Processing time 30min / thixotrop<br />
Unit of quantity: 1 bundle = 1500 g<br />
Unit of quantity: 1 bundle = 3300 g<br />
Colour: RAL 6<strong>02</strong>0 = chrome green<br />
Colour: RAL 6<strong>02</strong>0 = chrome green<br />
RAL 9005 = deep black RAL 9005 = deep black<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 3 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 3 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Article: HP-E30TDS-1.5<br />
Processing time 30min / thixotrop<br />
Unit of quantity: 1 bundle = 1500 g<br />
Colour:<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 3 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
RAL 1014 = ivory<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Article: HP-E30TDS-3.3<br />
Processing time 30min / thixotrop<br />
Unit of quantity: 1 bundle = 3300 g<br />
Colour:<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 3 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
RAL 1014 = ivory<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Epoxy Resin Systems<br />
The 1.5 kg packages are shipped by parcel service. The 3.3kg packages are shipped exclusively by forwarding agency.<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 127
Casting Resin System - Transparent -<br />
The Epoxy-System HP-E50GB is an unfilled, low-viscosity combination of resin<br />
and hardener with working time (pot life) about 40 minutes.*<br />
Usable for epoxy casting of medium thickness (up to approx. 15mm) depending<br />
on surface, temperature geometries and casting quantity (volume).*<br />
Article: HP-E50GB<br />
Processing time 40min / low viscous<br />
Price €<br />
(incl. hardener)<br />
150 g<br />
Basic price/kg<br />
750 g<br />
Basic price/kg<br />
1500 g<br />
Basic price/kg<br />
3 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
• transparent, low shrink-casting with tacky-free surfaces<br />
• very good flow behaviour (low-viscosity)<br />
• cold-hardening, demouldable at room-temperature<br />
• high fillable casting resin<br />
• cause pressure-resistant and impact-resistant (tough) moulds /<br />
components with high strength and very less shrinkage<br />
• foundry patterns, die plates, reproduction patterns<br />
• building of medium moulds and castings<br />
• encapsulation of decorative elements<br />
• levelling compound / injection resin for structural repairs<br />
Epoxy Resin Systems<br />
7,5 kg<br />
Basic price/kg<br />
12 kg<br />
Basic price/kg<br />
37,5 kg<br />
Basic price/kg<br />
HP-E50GB is free of nonylphenol and contains no active diluents!<br />
For a better UV resistance, a suitable clear coat (HP-PUR) should be applied.<br />
Furthermore our HP-BEL91 UV-Stabilizer can be add to the epoxy resin or clear<br />
coat, in order to give a better protection and improve the UV resistance in a<br />
long-term.<br />
During the hardening process, energy can be released in the form of heat, hence<br />
a cooling/heat exchanging should be provided in order to prevent hot spots.<br />
Product Properties: Resin Hardener Method<br />
Colouring<br />
Mixing ratio<br />
Mixing ratio<br />
Mixed viscosity<br />
weight<br />
volume<br />
HP-E50GB<br />
transparent<br />
low viscous<br />
Pot life (100g at 20°C) minutes approx. 40<br />
Demouldable after* (at 20°C) hours<br />
Full cure (at 20°C) days<br />
Processing temperature (optimum) °C<br />
100 50<br />
100 57<br />
48<br />
7<br />
10 - 15<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
700-1100 50-150 HP.07.003<br />
Data of Unreinforced Resin:<br />
Density<br />
Hardness<br />
Colour (mixed)<br />
g/cm³<br />
Shore D<br />
(cured condition)<br />
1,1<br />
85<br />
transparent<br />
* Depends on geometry and total amount of casting. Physical data determined of unfilled specimen. Curing<br />
specifications 24h at 23°C + 15h at 80°C<br />
128<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Casting Resin System -Transparent-<br />
The Epoxy-System HP-E300GB is an unfilled, low-viscous combination of<br />
resin and hardener with processing time (pot life) of more than 300 minutes.*<br />
Usable for epoxy casting of medium thickness (up to approx. 50mm*) and<br />
slightly increased temperatures.*<br />
HP-E300GB is free of nonylphenol and contains no active diluents!<br />
Article: HP-E300GB<br />
Processing time > 300min / low viscous<br />
Price €<br />
(incl. hardener)<br />
1350 g<br />
Basic price/kg<br />
3375 g<br />
Basic price/kg<br />
8,1 kg<br />
Basic price/kg<br />
13,5 kg<br />
Basic price/kg<br />
27 kg<br />
Basic price/kg<br />
40,5 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
** Price per barrel upon request<br />
Features and Benefits:<br />
• Transparent, low shrink-casting with tacky-free surfaces<br />
• Very good flow behaviour (low-viscous)<br />
• Cold-hardening, demouldable at room-temperature, applicable at<br />
slightly increased temperatures<br />
• High fillable casting resin<br />
• Causes pressure-resistant and impact-resistant (tough) moulds /<br />
components with high strength and very low shrinkage<br />
Industrial Modelling / Hobby Modelling / Boatbuilding:<br />
• Foundry patterns, die plates, reproduction patterns<br />
• Building of medium moulds and castings<br />
• Encapsulation of decorative elements<br />
• Levelling compound / injection resin for structural repairs<br />
Product Properties: Resin Hardener Method<br />
Colouring<br />
Mixing ratio<br />
Mixing ratio<br />
Mixed viscosity<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
weight<br />
volume<br />
Pot life (100g at 20°C) minutes<br />
Demouldable after* (at 20°C) hours<br />
Demouldable after (at 30°C) hours<br />
Processing temperature (optimum) °C<br />
HP-E300GB<br />
transparent<br />
100 35<br />
100 41<br />
low viscous<br />
> 300<br />
< 48<br />
< 24<br />
18 - 35<br />
Epoxy Resin Systems<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
450 15 DIN 16945<br />
Data of Unreinforced Resin:<br />
Density<br />
Hardness<br />
Colour (mixed)<br />
g/cm³<br />
Shore D<br />
(cured condition)<br />
1,1<br />
75<br />
transparent / colourless<br />
* Depends on geometry and total amount of casting. Specifications after hardening 7d at 20°C.<br />
*** suitable outlet valves, see page 192<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 129
Casting Resin System - Semi-Transparent -<br />
The Epoxy-System HP-E45GA is an unfilled, medium-viscous combination of<br />
resin and hardener with processing time (pot life) of approx. 45 minutes.*<br />
Usable for epoxy casting of medium thickness (up to approx. 20mm*)<br />
HP-E45GA is free of nonylphenol and contains no active diluents!<br />
Article: HP-E45GA<br />
Processing time 45min / medium viscous<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
• Semi-transparent, low shrink-casting with tacky-free surfaces<br />
• Good flow behaviour (medium-viscous)<br />
• Cold-hardening, demouldable at room-temperature<br />
• High fillable casting resin<br />
• The results are pressure-resistant and impact-resistant (tough)<br />
moulds / components with high strength<br />
Industrial Modelling / Hobby Modelling / Boatbuilding:<br />
Epoxy Resin Systems<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
** Price per barrel upon request<br />
*** suitable outlet valves,<br />
see page 192<br />
• Foundry patterns, die plates, reproduction patterns<br />
• Building of small moulds and castings with a transparent or slightly<br />
yellow colour<br />
• Encapsulation of decorative elements<br />
• Levelling compound<br />
• Dielectric resin for electrical embedding up to 48 Volts<br />
Product Properties: Resin Hardener Method<br />
HP-E45GA<br />
Colouring transparent yellowish<br />
Mixing ratio<br />
Mixing ratio<br />
Mixed viscosity<br />
weight<br />
volume<br />
Pot life (100g at 20°C) minutes<br />
Demouldable after* (at 20°C) hours<br />
Demouldable after (at 30°C) hours<br />
Processing temperature (optimum) °C<br />
100 60<br />
100 70<br />
medium viscous<br />
45<br />
< 12<br />
< 6<br />
15 - 25<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
8000 350 DIN 16945<br />
Data of Unreinforced Resin:<br />
Density<br />
Hardness<br />
Colour (mixed)<br />
g/cm³<br />
Shore D<br />
(cured condition)<br />
1,1<br />
82<br />
slightly yellowish<br />
* Depends on geometry and total amount of casting. Specifications after hardening 7d at 20°C.<br />
130<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Casting Resin System - residually flexible -<br />
The epoxy resin system E45GB is an unfilled, low viscous 2-component combination<br />
of resin and hardener with a working time of approx. 45 min for casting<br />
applications.<br />
HP-E45GB<br />
Processing time 45min / low viscous<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
incl. VAT<br />
** Price per barrel upon request<br />
*** suitable outlet valves,<br />
see page 192<br />
Features and Benefits:<br />
• Very good casting properties<br />
• Highly fillable<br />
• Transparent, sticky-free surfaces<br />
• High shock resistance<br />
• Low shrinkage<br />
Industrial Modelling / Hobby Modelling / Boatbuilding:<br />
• Foundry patterns, die plates, reproduction patterns<br />
• Building of small moulds and castings with a transparent or slightly<br />
yellow colour<br />
• Encapsulation of decorative elements<br />
• Levelling compound<br />
Product Properties: Resin Hardener Method<br />
Mixing ratio<br />
Mixing ratio<br />
Mixed viscosity<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
weight<br />
volume<br />
Pot life (100g at 20°C) minutes<br />
Demouldable after* (at 20°C) hours<br />
Full cure (at 20°C) days<br />
Processing temperature (optimum) °C<br />
HP-E45GB<br />
100 60<br />
100 66<br />
low viscous<br />
45<br />
48<br />
7<br />
15 - 25<br />
Epoxy Resin Systems<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
500 - 900 290 - 450 PM.01.003<br />
Data of Unreinforced Resin:<br />
Density<br />
Hardness<br />
Colour (mixed)<br />
g/cm³<br />
Shore D<br />
(cured condition)<br />
1,1 - 1,2 PM.01.0<strong>02</strong><br />
81 PM.01.009<br />
transparent visuell<br />
* Depends on geometry and total amount of casting. Specifications after hardening 7d at 20°C.<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 131
Casting Resin System - electronic-casting compound -<br />
The epoxy resin system E45GE is an unfilled, low viscous 2-component combination of resin and hardener with<br />
a working time of approx. 45 min. Applicable for casting applications in electronic up to 400 V.<br />
Article: E45GE<br />
Processing time 45min / low viscous<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
• For introducing electric circuits / connections, Electro applications<br />
up to 48 V / in compliance with the VDE regulations up to 400 V<br />
• Excellent casting propertiesTransparent, sticky-free surfaces<br />
• Good light stability<br />
• High impact resistance<br />
• Low exothermy<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
Epoxy Resin Systems<br />
** Price per barrel upon request<br />
*** suitable outlet valves,<br />
see page 192<br />
Product Properties: Resin Hardener Method<br />
E45GE<br />
Colouring transparent yellowish<br />
Mixing ratio<br />
Mixing ratio<br />
Mixed viscosity<br />
weight<br />
volume<br />
Pot life (100g at 20°C) minutes<br />
Demouldable after* (at 20°C) hours<br />
Full cure (at 20°C) days<br />
Processing temperature (optimum) °C<br />
100 60<br />
100 66<br />
medium viscous<br />
45<br />
48<br />
7<br />
15 - 25<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
500 - 900 290 - 450 PM.01.003<br />
Data of Unreinforced Resin:<br />
Density<br />
Hardness<br />
g/cm³<br />
Shore D<br />
(cured condition)<br />
1,1 - 1,2<br />
81<br />
* Depends on geometry and total amount of casting. Specifications after hardening 7d at 20°C.<br />
132<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Roller Coating Epoxy-System<br />
The Epoxy-System HP-E30RB is a coloured (similar to RAL 7032 pebbly grey), solvent-free and filled two-component<br />
combination of resin and hardener with medium working time (pot life) suitable for high quality floor and<br />
wall coatings<br />
Features and Benefits:<br />
• Spreadable and rollable coating mass for floor and wall coatings<br />
• Very good adhesive properties, high abrasion-resistance<br />
(in combination with our primer/sealer HP-E80FS)<br />
• If needed, anti-slip material can be added. Please refer to the data sheet for further information<br />
• High mechanical strength and chemical resistance<br />
• High quality surface, easy to clean<br />
• Free of solvents, can be thinned with HP-XB upon demand (maximum up to 5 %)<br />
• Coloured, similar to RAL 7032 pebble grey, more colours upon request<br />
• Average consumption is between 0,4 - 0,6 kg/m² per layer<br />
• Free of substances of very high concerns (SVHC)<br />
Applicable on cement bonded surfaces:<br />
• For coatings of new and slightly porous surfaces<br />
• High quality surface finishing for walls and floors indoors and outdoors<br />
• Coatings areas of floors in workshops, garages, feeding tables in livestock farming,<br />
slaugterhouses, milking stalls, floors within the livestock keeping etc.<br />
Please note:<br />
Due to aromatic molecule components, epoxy resin tend to yellowing colour if exposed to direct sunlight. This<br />
effect will be intensified by heat. To counteract this process, you can apply the transparent epoxy resin HP-<br />
E30TDS-0000 and UV stabilizer HP-BEL91.<br />
Epoxy Resin Systems<br />
coating of a feeding table<br />
RAL 7032<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 133
Product Properties: Resin Hardener Method<br />
HP-E30RB<br />
Mixing ratio<br />
weight 100 22<br />
Mixed viscosity (at 20°C) viscous (self-leveling)<br />
Pot life (at 20°C) minutes<br />
30<br />
Walkable after (at 20°C) hours<br />
24<br />
Walkable after (at 15°C) hours<br />
48<br />
Processing temperature (optimum) °C<br />
20 - 25<br />
Processing temperature (minimum) °C<br />
15<br />
Physical Data:<br />
Viscosity mPa s viscous<br />
300 - 400 HP.07.0003<br />
Epoxy Resin Systems<br />
Data of Unreinforced Resin:<br />
Compression resistance<br />
N/mm²<br />
(cured condition)<br />
Density g/cm³ approx. 1,5<br />
Hardness<br />
Shore<br />
Heat stability (Tg MAX) °C<br />
Specifications after hardening 7d at 23C.<br />
Article: HP-E30RB 2kg Article: HP-E30RB 4kg<br />
Processing time 30min / viscous<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
from 10 bundle<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
from 10 bundle<br />
Basic price/kg<br />
> 50 PM.01.<strong>02</strong>3<br />
Processing time 30min / viscous<br />
incl. VAT<br />
PM.01.0<strong>02</strong><br />
83 D PM.01.011<br />
50 PM.01.009<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
from 20 bundle<br />
Basic price/kg<br />
from 20 bundle<br />
Basic price/kg<br />
coating of a floor<br />
134<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Levelling Coating Epoxy-System<br />
The Epoxy-System HP-E30VB is a coloured (similar to RAL 7032 pebbly grey), solvent-free and filled two-component<br />
combination of resin and hardener with medium working time (pot life) suitable for high quality floor coatings.<br />
Features and Benefits:<br />
• Self-levelling coating mass<br />
• Very good adhesive properties, high abrasion-resistance<br />
(in combination with our primer/sealer HP-E80FS)<br />
• High mechanical strength and chemical resistance<br />
• High quality surface, easy to clean<br />
• Free of solvents<br />
• Coloured, similar to RAL 7032 pebble grey, more colours upon request<br />
• Average consumption is between 2,0 till ≥ 5,0 kg/m² (Coverage per surface-condition)<br />
• Free of substances of very high concerns (SVHC)<br />
Applicable on cement bonded surfaces:<br />
• For filling and smoothing of damaged floor areas<br />
• High quality surface finishing indoors and outdoors<br />
• Renovation of damaged and uneven floors in workshops, garages, feeding tables in livestock farming,<br />
slaughterhouses, floors within the livestock keeping etc.<br />
• Not applicable on curved or flexible surfaces<br />
Please note:<br />
Due to aromatic molecule components, epoxy resin tend to yellowing colour if exposed to direct sunlight. This<br />
effect will be intensified by heat. To counteract this process, you can apply the transparent epoxy resin HP-<br />
E30TDS-0000 and UV stabilizer HP-BEL91.<br />
Epoxy Resin Systems<br />
coating of a feeding table<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 135
Product Properties: Resin Hardener Method<br />
HP-E30VB<br />
Mixing ratio<br />
weight 100 17<br />
Mixed viscosity (at 20°C) highly viscous (self-leveling)<br />
Pot life (at 20°C) minutes<br />
30<br />
Walkable after (at 20°C) hours<br />
24<br />
Walkable after (at 15°C) hours<br />
48<br />
Processing temperature (optimum) °C<br />
20 - 25<br />
Processing temperature (minimum) °C<br />
15<br />
Physical Data:<br />
Viscosity mPa s highly viscous<br />
300 - 400 HP.07.0003<br />
Epoxy Resin Systems<br />
Data of Unreinforced Resin:<br />
Compression resistance<br />
N/mm²<br />
(cured condition)<br />
Density g/cm³ approx. 1,5<br />
Hardness<br />
Shore<br />
Heat stability (Tg MAX) °C<br />
Specifications after hardening 7d at 23C.<br />
Article: HP-E30VB 5kg Article: HP-E30VB 25kg<br />
Processing time 30min / highly viscous<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
from 10 bundle<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Processing time 30min / highly viscous<br />
Price € / bundle<br />
(incl. hardener)<br />
from 1 bundle<br />
Basic price/kg<br />
from 5 bundle<br />
Basic price/kg<br />
from 10 bundle<br />
Basic price/kg<br />
> 50 PM.01.<strong>02</strong>3<br />
incl. VAT<br />
PM.01.0<strong>02</strong><br />
82 D PM.01.011<br />
50 PM.01.009<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
from 20 bundle<br />
Basic price/kg<br />
from 20 bundle<br />
Basic price/kg<br />
RAL 7032<br />
136<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Epoxy resin basic system for paving joint mortar<br />
The epoxy resin basis system E25F is an unfilled, low viscous 2-components combination<br />
of resin and hardener with a short working time. This epoxy resin can be used as a basis<br />
for paving joint mortar.<br />
Article: E25F<br />
Processing time 25min / low viscous<br />
Price €<br />
(incl. hardener)<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
as basis for paving joint mortar (polymeric mortar):<br />
• Applicable as paving joint mortar when adding quartz filler<br />
(article: QS)<br />
• For grouting of old and new paving stones or paving slabs<br />
outdoors<br />
• Dry grouting<br />
• Can be adjusted water impermeable or open to diffusion<br />
• High mechanical strength<br />
• Low odour<br />
• Resistant to chemicals<br />
** Price per barrel upon request<br />
*** suitable outlet valves,<br />
see page 192<br />
Guide formulation:<br />
10 parts quarz filler: 1 part E25F (resin- / hardener mixture)<br />
Product Properties: Resin Hardener Method<br />
Mixing ratio<br />
Mixing ratio<br />
Mixed viscosity<br />
weight<br />
volume<br />
Pot life (100g at 20°C) minutes<br />
E25F<br />
low viscous<br />
Walkable (at 20°C) hours 24 (temperature-dependent)<br />
Open to traffic (at 20°C) days<br />
100 60<br />
100 65<br />
Processing temperature (optimum) °C 10 - 25 (minimal 5°C)<br />
25<br />
7<br />
Epoxy Resin Systems<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 137
Epoxy resin basic system for paving joint mortar<br />
The epoxy resin basis system E45F is an unfilled, low viscous 2-components combination<br />
of resin and hardener with a short working time. This epoxy resin can be used as a basis<br />
for paving joint mortar.<br />
Article: E45F<br />
Processing time 45min / low viscous<br />
Price €<br />
(incl. hardener)<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
as basis for paving joint mortar (polymeric mortar):<br />
• Highly fillable at good flowability<br />
• Rest flexible<br />
• Highly resilient<br />
• Odourless<br />
• Resistant to chemicals<br />
• Filling of cracks and joints in screeds/cement<br />
• Reaparing of flaws in mineral substrates<br />
12,8 kg<br />
Basic price/kg<br />
Epoxy Resin Systems<br />
** Price per barrel upon request<br />
*** suitable outlet valves,<br />
see page 192<br />
Product Properties: Resin Hardener Method<br />
Mixing ratio<br />
Mixing ratio<br />
Mixed viscosity<br />
weight<br />
volume<br />
Pot life (100g at 20°C) minutes<br />
Walkable (at 20°C) hours<br />
Open to traffic (at 20°C) days<br />
Processing temperature (optimum) °C<br />
E45F<br />
100 60<br />
100 66<br />
low viscous<br />
45<br />
48<br />
7<br />
15 - 25<br />
138<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Epoxy resin basic system for paving joint mortar<br />
The epoxy resin basis system EW60F is an unfilled, medium viscous 2-components combination<br />
of resin and hardener with a medium working time. This epoxy resin can be used<br />
as a basis for paving joint mortar. It is ideal for medium to large surfaces to be grouted. It is<br />
water emulsifiable and can also be applied in drizzle. Can be used in the slurry method!<br />
Article: EW60F<br />
Processing time 60min / medium viscous<br />
Price €<br />
(incl. hardener)<br />
500 g<br />
Basic price/kg<br />
incl. VAT net Discounts Enough for<br />
about 6kg of sand<br />
1 kg<br />
from 5 pieces 5%<br />
about 12,5kg of sand<br />
Basic price/kg<br />
from 10 pieces 10%<br />
from 20 pieces 20%<br />
2 kg about 25kg of sand<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
** Price per barrel upon<br />
request<br />
*** suitable outlet valves,<br />
see page 192<br />
Features and Benefits:<br />
as basis for paving joint mortar (polymeric mortar):<br />
• Fast and permanent grouting<br />
• Clean pavement surfaces, NO weed growth<br />
• Sure-footed, reduced risk of accidents<br />
• Light to heavy traffic load, depending on the mineral composition<br />
• EW60F is water emulsifiable and can be processed in drizzle<br />
• Environmentally friendly when cured<br />
• No cement veil<br />
• Impermeable or open to diffusion<br />
• Sweepers suitable<br />
• self-compacting<br />
• Low odor<br />
• resistant to chemicals<br />
Epoxy Resin Systems<br />
Product Properties: Resin Hardener Method<br />
EW60F<br />
Mixing ratio<br />
weight 100 100<br />
Mixing ratio<br />
volume 100 100<br />
Mixed viscosity<br />
medium viscous<br />
Pot life (100g at 20°C) minutes<br />
60<br />
Walkable (at 20°C) hours<br />
6<br />
Open to traffic (at 20°C) days<br />
7<br />
Processing temperature (optimum) °C<br />
10 - 25<br />
No weeds growing through!<br />
Clean pavement areas<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 139
Epoxy-System for Aquariums and Terrariums<br />
Our terrarium / aquarium systems have been developed specifically for the use in these areas. The sealed surfaces<br />
are impact, scratch and bite resistant. The result is a waterproof barrier which can be easily cleaned and disinfected.<br />
A nesting of bacteria and pathogens into the ground is prevented.<br />
Features and Benefits:<br />
As Laminating and Covering System<br />
• Good wetting of the reinforcing fibres<br />
• Make clear and tack-free surface<br />
• Cold curing<br />
• Good strength<br />
• Sealing of metal, wood, various plastics and mineral substrates<br />
• High surface protection, excellent hygiene and water barrier<br />
• High impact resistance<br />
Epoxy Resin Systems<br />
Aquarium and Terrarium Systems Compared:<br />
Field of Application:<br />
Underground<br />
Article<br />
Others<br />
Humid Terrariums<br />
Aquariums, paludariums<br />
low viscous<br />
for hard surfaces<br />
(OSB, stone, …)<br />
medium viscous<br />
for soft or non-porous<br />
surfaces<br />
(Styrofoam, …)<br />
Desert Terrariums<br />
high UV-resistance<br />
low viscous<br />
for hard surfaces<br />
(OSB, stone, …)<br />
medium viscous<br />
for soft or non-porous<br />
surfaces<br />
(Styrofoam, …)<br />
HP-E45T HP-E45TM HP-E25TU HP-E25TMU<br />
Also suitable for<br />
saltwater aquariums<br />
Suitable for<br />
the use of UV lamps<br />
E = Epoxy Resin Systems; T = Terrarium system; M = medium viscous; U = at higher UV load<br />
Product Properties: HP-E45T HP-E45TM HP-E25TU HP-E25TMU<br />
Colour<br />
Mix ratio (resin : hardener) weight<br />
volume<br />
light yellow / clear<br />
Mixed viscosity (at 20°C) mPa s low viscous medium viscous low viscous medium viscous<br />
Pot life (at 20°C) minutes<br />
Tack-free<br />
hours<br />
Processing temperature (optimum) °C<br />
Processing temperature (minimum) °C<br />
Consumption as a sealing<br />
(unreinforced, unfilled)<br />
g/m²<br />
100:60 100:60 100:60 100:60<br />
100:66 100:70 100:64 100:66<br />
45 45 25 25<br />
48 48 24 24<br />
20 20 20 20<br />
15 15 10 10<br />
approxy 400g/m² (in two coats)<br />
140<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Epoxy-System for Aquariums and Terrariums<br />
Article: HP-E45T<br />
Processing time 25min / low viscous<br />
Article: HP-E45TM<br />
Processing time 25min / medium viscous<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Article: HP-E25TU<br />
Processing time 25min / low viscous<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Article: HP-E25TMU<br />
Processing time 25min / medium viscous<br />
Price €<br />
(incl. hardener)<br />
400 g<br />
Basic price/kg<br />
800 g<br />
Basic price/kg<br />
1600 g<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Epoxy Resin Systems<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
12,8 kg<br />
Basic price/kg<br />
48 kg<br />
Basic price/kg<br />
** Price per barrel upon request<br />
Matting Agent for Aquariums and Terrariums<br />
HP-BEL81: Matting Agent<br />
Liquid additive for matting of resin systems on epoxy resin bases. Prevents<br />
gloss and reflections and enhanced slip resistant. Physiologically<br />
safe in terrariums or aquariums constructions.<br />
Article: HP-BEL81<br />
Matting Agent<br />
Price<br />
€/piece<br />
300g<br />
Basic price/100g<br />
incl. VAT<br />
net<br />
10,90 9,16<br />
3,63 3,05<br />
1200g<br />
Basic price/100g<br />
19,90 16,72<br />
1,66 1,39<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 141
OVERVIEW POLYESTER RESIN SYSTEMS<br />
Polyester resins are inexpensive and therefore widespreaded in the plastic<br />
industry.<br />
They are very often used in many different and diversified applications<br />
such as marine industry, pond / pool coatings and so on. Polyester resins<br />
cure with a MEKP-hardener.<br />
Please consider:<br />
The contained monomer styrene seizes some foams (eg Styrodur®,<br />
Styrofoam, ...). This is especially important in the production of sandwich<br />
components.<br />
As an alternative we offer our epoxy resin systems!<br />
Table guidance for choosing the right Polyester Resin System.<br />
LAMINATING ADHERE COVERING CASTING<br />
Polyester Resin Systems<br />
page<br />
144<br />
145<br />
146<br />
147<br />
Products<br />
HP-P21L<br />
laminating resin (wax free)<br />
HP-P21LP<br />
laminating resin (wax containing)<br />
HP-P21LPG<br />
laminating resin (wax containing)<br />
HP-P21LS<br />
laminating resin (wax free)<br />
… fibre wet-out<br />
… sticking<br />
together<br />
… in female<br />
moulds<br />
(gelcoat)<br />
… on top<br />
(topcoat)<br />
… embedding<br />
++ O - -<br />
++ - - + -<br />
++ - - + -<br />
++ O - - +<br />
148<br />
HP-P21LSP<br />
laminating resin (wax containing)<br />
++ - - + -<br />
150-151<br />
HP-P21TC *<br />
topcoat (wax containing)<br />
- - - ++ -<br />
149<br />
HP-P21GC *<br />
gelcoat (wax free)<br />
- - ++ -<br />
++ = very good applicable + = applicable o = conditionally applicable - = not provided<br />
Law change in the Chemicals Prohibition Ordinance (ChemVerbotsV) !!!<br />
The shipping of polyester resins is only possible if the following basics are met:<br />
- Professional use<br />
- Public research, study or educational institutions<br />
- Resellers<br />
In addition, polyester resin systems can only be picked up by persons over 18 years after having a appropriate<br />
instruction.<br />
142<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Properties:<br />
• Excellent value compared to other matrix resins<br />
• Good chemical resistance<br />
• LSE (low Styrene Emission) Polyester Resin<br />
• Simple dosage setting<br />
• The viscosity can be adjusted with the addition of<br />
Thixotropic Powder (HP-PK22)<br />
FEATURES SURFACE POT LIFE TEMPERATURES<br />
ORTHO, LSE, slightly thixotropic,<br />
laminating resin for frp ponds<br />
ORTHO, LSE, slightly thixotropic<br />
ORTHO, LSE,<br />
approval from Lloyd´s Register,<br />
slightly thixotropic<br />
ISO/NPG, LSE,<br />
slightly thixotropic,<br />
laminating resin for frp ponds / pools<br />
tacky-free<br />
surface ?<br />
no<br />
yes<br />
yes<br />
no<br />
Improved<br />
chemical<br />
resistance ?<br />
no<br />
no<br />
no<br />
yes<br />
min. at<br />
20°C<br />
… processing<br />
minimum<br />
(recommended)<br />
°C<br />
… loadability<br />
(HDT / °C)<br />
15-20 15 60<br />
15-20 15 60<br />
15-20 15 70<br />
15-20 15 > 90<br />
Polyester Resin Systems<br />
ISO/NPG, LSE,<br />
slightly thixotropic<br />
yes<br />
yes<br />
15-20 15 > 90<br />
thixotropic,<br />
colourless or coloured, high quality<br />
topcoat,suitable for frp ponds pools<br />
yes<br />
yes<br />
15-20 18 > 80<br />
thixotropic,<br />
colourless or coloured<br />
no<br />
yes<br />
15-20 18 > 80<br />
* Gel - and Topcoats are available in different colours. Rev. 1.5<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 143
Laminate Polyester Resin - Wax Free / Tacky Curing<br />
The LSE Polyester Laminating System HP-P21L is an unfilled, low-viscous combination of resin and hardener<br />
with short processing time (pot life).<br />
Article: HP-P21L<br />
Orthopthalic-based<br />
Processing time 15-20min / low viscous<br />
Price €<br />
(incl. hardener)<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
10kg resin/ 200g hardener<br />
Basic price/kg<br />
30kg resin/ 600g hardener<br />
Basic price/kg<br />
*50kg resin/ 1kg hardener<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
• Unsaturated Polyester Resin<br />
• Orthophtalic-based, pre-accelerated, high thixotropic index<br />
• Wax free, tacky for further bonds / layers<br />
• Good mechanical properties<br />
• Excellent wet-out of fibre glass, carbon and aramid fibres<br />
• Applicable for hand lay-up, spray and for general reinforced<br />
plastics<br />
• Laminating tanks, containers, floating equipments,<br />
pools, ponds, modelmaking, car industry,...<br />
• LSE (Low Styrene Emission) polyester resin<br />
• Contains peroxide-idicator<br />
*220kg resin/ 5kg hardener<br />
Basic price/kg<br />
Polyester Resin Systems<br />
* Shipping in a steel bucket or a steel drum<br />
Product Properties: Resin Hardener Method<br />
HP-P21L<br />
Mixing ratio<br />
weight 100 2<br />
Mixing ratio<br />
volume 100 2<br />
Mixed viscosity (at 20°C) low viscous<br />
Pot life (at 20°C) minutes 15 - 20<br />
Demouldable after<br />
hours 24<br />
Full cure<br />
days 2<br />
Processing temperature °C 15 - 25<br />
Following layers without grinding within days 7<br />
* Project zoo -<br />
therapy center Münzesheim<br />
(Kraichtal hospital)<br />
Physical Data:<br />
Viscosity<br />
Data of Unreinforced Resin:<br />
mPa s500 - 600 DIN 53015<br />
(cured condition)<br />
Tensile strength<br />
MPa<br />
Elongation at break %<br />
Flexural strength<br />
MPa<br />
Impact resistance<br />
kJ/m²<br />
E-Modulus<br />
MPa<br />
Hardness<br />
Barcol B<br />
Heat distortion temperature °C<br />
62 ISO 527<br />
1,7 ISO 527<br />
110 ISO 178<br />
7,4 ISO 179<br />
4100 ISO 527<br />
45 ASTM D2583<br />
60 ISO R 75<br />
Specifications after curing 48h at 20°C (68°F) and 2% MEKP<br />
144<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Laminate Polyester Resin - Waxed for Finish Uses<br />
The LSE Polyester Laminating System HP-P21LP is an unfilled, low-viscous combination of resin and hardener<br />
with a short processing time (pot life).<br />
Article: HP-P21LP<br />
Orthopthalic-based<br />
Processing time 15-20min / low viscous<br />
Price €<br />
(incl. hardener)<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
10kg resin/ 200g hardener<br />
Basic price/kg<br />
30kg resin/ 600g hardener<br />
Basic price/kg<br />
*50kg resin/ 1kg hardener<br />
Basic price/kg<br />
*220kg resin/ 5kg hardener<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
• Unsaturated Polyester Resin<br />
• Orthophtalic-based, pre-accelerated, high thixotropic<br />
index<br />
• Waxed for top or finish uses (prevent coats of resin from<br />
remaining sticky)<br />
• Good mechanical properties<br />
• Excellent wet-out of fibre glass, carbon and aramid fibres<br />
• Applicable for hand lay-up, spray and for general<br />
reinforced plastics<br />
• Laminating tanks, containers, floating equipment, pools,<br />
ponds, modelmaking, car industry,...<br />
• LSE (Low Styrene Emission) polyester resin<br />
• Contains peroxide-indicator<br />
* Shipping in a steel bucket or a steel drum<br />
Product Properties: Resin Hardener Method<br />
HP-P21LP<br />
Mixing ratio<br />
weight 100 2<br />
Mixing ratio<br />
volume 100 2<br />
Mixed viscosity (at 20°C) low viscous<br />
Pot life (at 20°C) minutes 15 - 20<br />
Demouldable after<br />
hours<br />
24<br />
Full cure<br />
days<br />
2<br />
Processing temperature °C<br />
15 - 25<br />
Following layers without grinding within days<br />
1<br />
Polyester Resin Systems<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
500 - 600 DIN 53015<br />
Data of Unreinforced Resin:<br />
(cured condition)<br />
Tensile strength<br />
MPa<br />
Elongation at break %<br />
Flexural strength<br />
MPa<br />
Impact resistance<br />
kJ/m²<br />
E-Modulus<br />
MPa<br />
Hardness<br />
Barcol B<br />
Heat distortion temperature °C<br />
62 ISO 527<br />
1,7 ISO 527<br />
110 ISO 178<br />
7,4 ISO 179<br />
4100 ISO 527<br />
45 ASTM D2583<br />
60 ISO R 75<br />
Specifications after curing 48h at 20°C (68°F) and 2% MEKP<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 145
Laminate Polyester Resin - Approval to Lloyd´s Register of Shipping<br />
The LSE Polyester Laminating System HP-P21LPG is an unfilled, low-viscous combination<br />
of resin and hardener.<br />
Article: HP-P21LPG<br />
Orthopthalic-based<br />
Processing time 15-20min / low viscous<br />
Price €<br />
(incl. hardener)<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
10kg resin/ 200g hardener<br />
Basic price/kg<br />
30kg resin/ 600g hardener<br />
Basic price/kg<br />
*50kg resin/ 1kg hardener<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
• Unsaturated Polyester Resin<br />
• Orthophtalic-based, pre-accelerated, high thixotropic index<br />
• Waxed for top or finish uses (prevent coats of resin from<br />
remaining sticky)<br />
• Good mechanical properties<br />
• Excellent wet-out of fibre glass, carbon and aramid fibres<br />
• Applicable for hand lay-up, spray and for general reinforced<br />
plastics<br />
• Laminating tanks, containers, floating equipment, pools,<br />
ponds, modelmaking, car industry,...<br />
• LSE (Low Styrene Emission) Polyester Resin<br />
• Approval to Lloyd‘s register of shipping<br />
*220kg resin/ 5kg hardener<br />
Basic price/kg<br />
Polyester Resin Systems<br />
* Shipping in a steel bucket or a steel drum<br />
Product Properties: Resin Hardener Method<br />
HP-P21L<br />
Mixing ratio<br />
weight 100 2<br />
Mixing ratio<br />
volume 100 2<br />
Mixed viscosity (at 20°C) low viscous<br />
Pot life (at 20°C) minutes 15 - 20<br />
Demouldable after<br />
hours<br />
24<br />
Full cure<br />
days<br />
2<br />
Processing temperature °C<br />
15 - 25<br />
Following layers without grinding within days<br />
1<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
500 - 600 DIN 53015<br />
Data of Unreinforced Resin:<br />
(cured condition)<br />
Peak temperature (1% MEKP, from 25°C) °C<br />
Tensile strength<br />
MPa<br />
Elongation at break %<br />
Flexural strength<br />
MPa<br />
Impact resistance<br />
kJ/m²<br />
E-Modulus<br />
MPa<br />
Hardness<br />
Barcol B<br />
Heat distortion temperature °C<br />
75 - 105<br />
70 ISO 527<br />
2 ISO 527<br />
110 ISO 178<br />
10 ISO 179<br />
3600 ISO 527<br />
45 ASTM D2583<br />
70 ISO R 75<br />
Specifications after curing 48h at 20°C (68°F) and 2% MEKP<br />
146<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Laminate Polyester Resin - Wax-Free ISO/NPG Basis<br />
The LSE Polyester Laminating System HP-P21LS is an unfilled, low-viscous combination<br />
of resin and hardener.<br />
Article: HP-P21LS<br />
ISO-NPG-based<br />
Processing time 15-20min / low viscous<br />
Price €<br />
(incl. hardener)<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
10kg resin/ 200g hardener<br />
Basic price/kg<br />
30kg resin/ 600g hardener<br />
Basic price/kg<br />
*50kg resin/ 1kg hardener<br />
Basic price/kg<br />
*220kg resin/ 5kg hardener<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
• Unsaturated high quality Polyester Resin, based in<br />
ISO/NPG<br />
• Pre-accelerated, high thixotropic index<br />
• Wax free, tacky for further bonds / layers<br />
• Good mechanical properties<br />
• Excellent wet-out of fibre glass, carbon and aramid<br />
fibres<br />
• Applicable for hand lay-up, spray and for general reinforced<br />
plastics<br />
• Laminating tanks, containers, floating equipment,<br />
pools, ponds, modelmaking, car industry,...<br />
• LSE (Low Styrene Emission) polyester resin<br />
• High water / chemical resistance and better heat<br />
stability<br />
* Shipping in a steel bucket or a steel drum<br />
Product Properties: Resin Hardener Method<br />
HP-P21LS<br />
Mixing ratio<br />
weight 100 2<br />
Mixing ratio<br />
volume 100 2<br />
Mixed viscosity (at 20°C) low viscous<br />
Pot life (at 20°C) minutes 15 - 20<br />
Demouldable after<br />
hours<br />
24<br />
Full cure<br />
days<br />
2<br />
Processing temperature °C<br />
15 - 25<br />
Following layers without grinding within days<br />
7<br />
Polyester Resin Systems<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
600 - 800 DIN 53015<br />
Data of Unreinforced Resin:<br />
(cured condition)<br />
Tensile strength<br />
MPa<br />
Elongation at break %<br />
Flexural strength<br />
MPa<br />
Impact resistance<br />
kJ/m²<br />
E-Modulus<br />
MPa<br />
Hardness<br />
Barcol B<br />
Heat distortion temperature °C<br />
80 ISO 527<br />
3,5 ISO 527<br />
110 ISO 178<br />
10 ISO 179<br />
3500 ISO 527<br />
45 ASTM D2583<br />
> 90 ISO R 75<br />
Specifications after curing 48h at 20°C (68°F) and 2% MEKP<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 147
Laminate Polyester Resin - Waxed for Top or Finish Uses / ISO/NPG Basis<br />
The LSE Polyester Laminating System HP-P21LSP is an unfilled, low-viscous combination of<br />
resin and hardener.<br />
Polyester Resin Systems<br />
Article: HP-P21LSP<br />
ISO-NPG-based<br />
Processing time 15-20min / low viscous<br />
Price €<br />
(incl. hardener)<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
10kg resin/ 200g hardener<br />
Basic price/kg<br />
30kg resin/ 600g hardener<br />
Basic price/kg<br />
*50kg resin/ 1kg hardener<br />
Basic price/kg<br />
*220kg resin/ 5kg hardener<br />
Basic price/kg<br />
incl. VAT<br />
* Shipping in steel bucket or steel drum<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Features and Benefits:<br />
• Unsaturated high quality polyester resin, based in<br />
ISO/NPG<br />
• Pre-accelerated, high thixotropic index<br />
• Waxed for top or finish uses<br />
• Good mechanical properties<br />
• Excellent wet-out of fibre glass, carbon and aramid<br />
fibres<br />
• Applicable for hand lay-up, spray and for general reinforced<br />
plastics<br />
• Laminating tanks, containers, floating equipment,<br />
pools, ponds, modelmaking, car industry...<br />
• LSE (Low Styrene Emission) polyester resin<br />
• High water / chemical resistance and better heat<br />
stability<br />
Product Properties: Resin Hardener Method<br />
Mixing ratio<br />
Mixing ratio<br />
weight<br />
volume<br />
HP-P21LSP<br />
Mixed viscosity (at 20°C) low viscous<br />
Pot life (at 20°C) minutes<br />
Demouldable after<br />
Full cure<br />
hours<br />
days<br />
Processing temperature °C<br />
Following layers without grinding within<br />
days<br />
100 2<br />
100 2<br />
15 - 20<br />
24<br />
2<br />
15 - 25<br />
1<br />
Physical Data:<br />
Viscosity<br />
mPa s<br />
600 - 800 DIN 53015<br />
Data of Unreinforced Resin:<br />
(cured condition)<br />
Tensile strength<br />
MPa<br />
Elongation at break %<br />
Flexural strength<br />
MPa<br />
Impact resistance<br />
kJ/m²<br />
E-Modulus<br />
MPa<br />
Hardness<br />
Barcol B<br />
Heat distortion temperature °C<br />
80 ISO 527<br />
3,5 ISO 527<br />
110 ISO 178<br />
10 ISO 179<br />
3500 ISO 527<br />
45 ASTM D2583<br />
> 90 ISO R 75<br />
Specifications after curing 48h at 20°C (68°F) and 2% MEKP<br />
148<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Gelcoat - ISO/NPG Basis<br />
The Polyester-System HP-P21GC is a pre-accelerated, semi-flexible ISO/NPG gelcoat.<br />
It is particularly suitable for coatings in swimming pools and pond constructions,<br />
in boat building, vehicle manufacturing and tuning parts, as well as in modeling.<br />
Features and Benefits:<br />
• High-quality, unsaturated polyester gelcoat ISO/NPG<br />
• Thixotropic, tacky curing (wax free)<br />
• Cobalt pre-accelerated<br />
• Slightly higher elasticity (semi-flexible and therefore less damage on the laminate)<br />
• High UV stability, excellent weather resistance<br />
• For use in swimming pools / pond constructions and in boat building<br />
• Viscosity set for manual application<br />
Product Properties: Resin Hardener<br />
HP-P21GC<br />
Mixing ratio<br />
weight 100 2<br />
Mixing ratio<br />
volume 100 2<br />
Mixed viscosity (at 20°C) thixotropic<br />
High viscosity for manual application<br />
Pot life (at 20°C) minutes 15 - 20<br />
Demouldable<br />
hours<br />
24<br />
Cured<br />
hours<br />
48<br />
Processing temperature (optimal) °C<br />
20<br />
Processing temperature (min/max) °C<br />
18 - 25<br />
Recoat within<br />
hours<br />
24<br />
Fully cured after<br />
days<br />
7<br />
Polyester Resin Systems<br />
Available Standard Colours:<br />
Article: HP-P21GC<br />
RAL 0000<br />
Transparent<br />
ISO-NPG-based<br />
Article: HP-P21GC<br />
RAL 9010<br />
Pure White<br />
ISO-NPG-based<br />
Price €<br />
(incl. hardener)<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
2,5kg resin/ 100g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
18,4kg resin/ 400g hardener<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Price €<br />
(incl. hardener)<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
2,5kg resin/ 100g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
20,42kg resin/ 400g hardener<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 149
Topcoat - ISO/NPG Basis<br />
The LSE Polyester Laminating System HP-P21LSP is an unfilled, low-viscous combination of resin and<br />
hardener.<br />
Features and Benefits:<br />
• High-quality, unsaturated polyester resin based on ISO/NPG<br />
• Thixotropic, tacky- free curing (waxed)<br />
• Cobalt pre-accelerated<br />
• Slightly higher elasticity (semi-flexible and therefore less<br />
damage on the laminate)<br />
• High UV stability, excellent weather resistance<br />
• Salient<br />
• Heat resistance > 80°C<br />
Polyester Resin Systems<br />
Product Properties: Resin Hardener<br />
HP-P21TC<br />
Mixing ratio<br />
weight 100 2<br />
Mixing ratio<br />
volume 100 2<br />
Mixed viscosity (at 20°C) Thixotropic<br />
High viscosity for manual application<br />
Pot life (at 20°C) minutes 15 - 20<br />
Demouldable<br />
hours<br />
24<br />
Cured<br />
hours<br />
48<br />
Processing temperature (optimal) °C<br />
20<br />
Processing temperature (min/max) °C<br />
18 - 25<br />
Recoat within<br />
hours<br />
12<br />
Fully cured after<br />
days<br />
7<br />
Article: HP-P21TC<br />
RAL 0000<br />
Transparent<br />
ISO-NPG-based<br />
Article: HP-P21TC<br />
RAL 5012<br />
Light Blue<br />
ISO-NPG-based<br />
Price €<br />
(incl. hardener)<br />
incl. VAT<br />
net<br />
Price €<br />
(incl. hardener)<br />
incl. VAT<br />
net<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
2,5kg resin/ 100g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
2,5kg resin/ 100g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
18,35kg resin/ 400g hardener<br />
Basic price/kg<br />
19,15kg resin/ 400g hardener<br />
Basic price/kg<br />
150<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: HP-P21TC<br />
RAL 6<strong>02</strong>0<br />
ISO-NPG-based<br />
Chromoxydgreen<br />
Article: HP-P21TC<br />
RAL 9005<br />
Deep Black<br />
ISO-NPG-based<br />
Price €<br />
(incl. hardener)<br />
incl. VAT<br />
net<br />
Price €<br />
(incl. hardener)<br />
incl. VAT<br />
net<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
2,5kg resin/ 100g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
2,5kg resin/ 100g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
19,63kg resin/ 400g hardener<br />
Basic price/kg<br />
20,35kg resin/ 400g hardener<br />
Basic price/kg<br />
Article: HP-P21TC<br />
RAL 9010<br />
Pure White<br />
ISO-NPG-based<br />
Price €<br />
(incl. hardener)<br />
incl. VAT<br />
net<br />
1kg resin/ 20g hardener<br />
Basic price/kg<br />
2,5kg resin/ 100g hardener<br />
Basic price/kg<br />
5kg resin/ 100g hardener<br />
Basic price/kg<br />
20,37kg resin/ 400g hardener<br />
Basic price/kg<br />
MEKP-Hardener für Polyester Resins<br />
PRICES AND<br />
AVAILABILITY IN<br />
OUR ONLINE SHOP<br />
Polyester Resin Systems<br />
Article: MEKP<br />
Dosage: 2%<br />
Price € incl. VAT net<br />
100g hardener<br />
Basic price/kg<br />
200g hardener<br />
Basic price/kg<br />
4,70 3,95<br />
47,00 39,50<br />
5,90 4,96<br />
29,50 24,79<br />
Features and Benefits:<br />
• Can be used for the pre-accelerated Polyester Resins of the series<br />
HP-P21<br />
• Other resins may require preliminary<br />
• Made for Laminating Resins Gel / Topcoats with accelerator<br />
• Suitable for: hand lay up, spray up, spinning, infusion and<br />
filament winding<br />
600g hardener<br />
Basic price/kg<br />
9,89 8,31<br />
16,48 13,85<br />
Product Properties:<br />
MEKP<br />
1kg hardener<br />
Basic price/kg<br />
5kg hardener<br />
Basic price/kg<br />
15,90 13,36<br />
15,90 13,36<br />
52,95 44,50<br />
10,59 8,90<br />
This product must be sent by carrier agency<br />
because it is a hazardous material.<br />
Please contact us for more information about<br />
transport costs for this item.<br />
Chemical nature<br />
Colour<br />
Mixing ratio<br />
Processing temperature °C<br />
Dosage %<br />
methyl ethyl ketone peroxide<br />
transparent<br />
As recommended by the<br />
respective system<br />
15 - 25<br />
2<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 151
Mold System and Casting Resins<br />
Page<br />
Products<br />
Mixing ratio Pot life Hardness<br />
Shore<br />
Particularities<br />
Weight<br />
( minutes at<br />
20°C)<br />
153<br />
HP-SI6GB<br />
Silicone Mold System<br />
100/100 6 A 18 - 20<br />
- high dimensional<br />
accuracy<br />
153<br />
HP-SI30GB<br />
Silicone Mold System<br />
100/100 30 A 18 - 22<br />
- high dimensional<br />
accuracy<br />
153<br />
HP-SI41GB<br />
Silicone Mold System<br />
100/3 40 A 20<br />
- Particularly suitable for<br />
mineral casting resins<br />
- tin free<br />
155<br />
HP-R15GB-flex<br />
Polyurethane Casting Resin<br />
100/30 10 - 15 A 60 - 70<br />
- High flexibility<br />
Mold and Casting Resins<br />
156<br />
156<br />
157<br />
HP-R4GB<br />
Polyurethane Casting Resin<br />
HP-R12GB<br />
Polyurethane Casting Resin<br />
HP-A15GB<br />
Acryl Casting Resin<br />
100/100 3 - 4 D 70<br />
100/100 9 - 10 D 65<br />
100/300 10 - 20 D 84<br />
- Electric casting compound<br />
- insulation resistance > 20 GΩ<br />
(at 2500V/3mm)<br />
- Ideal for objects > 100g<br />
- solvent-free water basis<br />
- odorless<br />
152<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Silicone Mold System<br />
The silicone systems HP-SI6GB, HP-SI30GB and HP-SI41GB are medium-viscosity 2-component combinations<br />
of silicone rubber with a low processing time.<br />
Features and Benefits:<br />
• Medium viscous molding compound<br />
• High tear strength<br />
• Bubble-free grouting<br />
• Creation of flexible molds<br />
• Duplicate in model building<br />
Product Properties: HP-SI6GB HP-SI30GB HP-SI41GB<br />
addition crosslinking condensation crosslinking<br />
Colouring light green red white<br />
Mixing ratio<br />
weight 100/100 100/100 100/3<br />
Mixed viscosity<br />
medium viscous<br />
Pot life (at 20°C) minutes<br />
Demouldable after (at 20°C) hours (h)<br />
Hardness Shore A<br />
hours (h)<br />
Shrinkage %<br />
Particularities:<br />
6 30 40<br />
3 5<br />
18 - 20 18 - 22 20<br />
Polyurethane flexibal Casting Resin<br />
SI-VD is added into the silicone system SI30GB to optimize the flow properties. The<br />
addition reduce the pot life of the SI30GB.<br />
Features and Benefits:<br />
• Excellent thickening effect for SI30GB<br />
• Solvent-free<br />
• Dilution of condensation and additioncuring RTV-s silicone systems<br />
• Optimization of the gradient properties<br />
• Creation of silicone putties<br />
• The additon reduce the pot life<br />
Mold and Casting Resins<br />
Article: HP-SI-VD<br />
Thixotropic for Silicone<br />
Price €<br />
(incl. hardener)<br />
100 g<br />
Basic price/kg<br />
500 g<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
14,90 12,52<br />
149,00 125,21<br />
43,90 36,89<br />
87,80 73,78<br />
Physical data:<br />
Density 20°C: Ca. 1,1 g/cm³<br />
Viscosity: 100 - 300 mPas<br />
Gardner: < 2<br />
Dosage:<br />
Reduction of the flow rate: 0,1 % - 0,2 %<br />
Creation of putties: 0,5 % - 1,0 %<br />
Thinner for SI6GB / SI30GB / SI41GB<br />
SI-RV is an additiv and thinner for SI6GB, SI30GB or SI41GB. SI-RV can be stired<br />
intensively in the mixed silicone-system.<br />
Features and Benefits:<br />
• Excellent dilution effect<br />
• Solvent-free<br />
• Dilution of condensation and additioncuring RTV-2 silicone systems (SI6GB, SI-<br />
30GB, SI41GB)<br />
• Optimization of the gradient properties<br />
• Dosage till 10 %<br />
Article: HP-SI-RV<br />
Thinner for SI6GB / SI30GB / SI41GB<br />
Price €<br />
(incl. hardener)<br />
500 g<br />
Basic price/kg<br />
incl. VAT<br />
net<br />
12,90 10,84<br />
25,80 21,68<br />
Physical data:<br />
Density 20°C: Ca. 1,0 g/cm³<br />
Viscosity: 50 - 100 mPas<br />
Gardner: < 1<br />
154<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Polyurethane flexibal Casting Resin<br />
The PUR system HP-R15GB-flex is an unfilled, low-viscosity 2-component combination of resin and hardener<br />
with high flexibility.<br />
Features and Benefits:<br />
• Excellent flow characteristics<br />
• High flexibility<br />
• Paintable with colouring pastes<br />
• Creation of detailed models with low wall thicknesses<br />
Product Properties:<br />
HP-R15GB<br />
Price €<br />
(incl. hardener)<br />
650 g<br />
Basic price/kg<br />
Colouring<br />
Mixing ratio<br />
Mixed viscosity<br />
weight<br />
Pot life (at 20°C) minutes<br />
Demouldable after (at 20°C) minutes<br />
Full cure (at 20°C) hours (h)<br />
Hardness Shore A<br />
Article: HP-R15GB<br />
Processing time 5 - 10 min<br />
incl. VAT<br />
net<br />
17,50 14,71<br />
26,92 22,62<br />
beige<br />
100/30<br />
low viscous<br />
5 - 10<br />
12<br />
24<br />
60 - 70<br />
Mold and Casting Resins<br />
1,3 kg<br />
Basic price/kg<br />
2,6 kg<br />
Basic price/kg<br />
6,5 kg<br />
Basic price/kg<br />
13 kg<br />
Basic price/kg<br />
27,90 23,45<br />
21,46 18,03<br />
49,50 41,60<br />
19,04 16,00<br />
113,50 95,38<br />
17,46 14,67<br />
195,90 164,62<br />
15,07 12,66<br />
application examples<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 155
Polyurethane Fast Casting Resin<br />
The PUR systems HP-R4GB and HP-R12GB are unfilled, low-viscosity 2-component combinations of resin and<br />
hardener with rapid through-hardening.<br />
Features and Benefits:<br />
• Excellent flow characteristics<br />
• Fast curing, short demoulding time<br />
• Easy to work with<br />
• High filling capacity<br />
• Creation of detailed models with low wall thicknesses<br />
• Can be dyed with color pastes - Addition max. 3%<br />
Product Properties: HP-R4GB HP-R12GB<br />
Mold and Casting Resins<br />
Colouring<br />
Mixing ratio<br />
Mixed viscosity<br />
weight<br />
Pot life (at 20°C) minutes<br />
beige<br />
low viscous<br />
Demouldable after (at 20°C) minutes > 30 (100g, layer thickness 30mm) > 180<br />
Mechanically resistant (at 20°C) hours (h)<br />
Electrically resistant (at 20°C) hours (h)<br />
Hardness Shore D<br />
Particularities:<br />
Article: HP-R4GB<br />
Processing time 3-4min<br />
Ideal for objects < 100g<br />
Electric casting compound<br />
100/100<br />
3 - 4 9 - 10<br />
3 24<br />
1<br />
70 65<br />
Ideal for objects > 100g<br />
Article: HP-R12GB<br />
Processing time 9-10min<br />
Price €<br />
(incl. hardener)<br />
incl. VAT<br />
net<br />
Price €<br />
(incl. hardener)<br />
incl. VAT<br />
net<br />
500 g<br />
Basic price/kg<br />
14,50 12,18<br />
29,00 24,37<br />
500 g<br />
Basic price/kg<br />
14,50 12,18<br />
29,00 24,37<br />
1 kg<br />
Basic price/kg<br />
20,50 17,23<br />
20,50 17,23<br />
1 kg<br />
Basic price/kg<br />
20,50 17,23<br />
20,50 17,23<br />
2 kg<br />
Basic price/kg<br />
33,90 28,49<br />
16,95 14,24<br />
2 kg<br />
Basic price/kg<br />
33,90 28,49<br />
16,95 14,24<br />
5 kg<br />
Basic price/kg<br />
76,90 64,62<br />
15,38 12,92<br />
5 kg<br />
Basic price/kg<br />
76,90 64,62<br />
15,38 12,92<br />
10 kg<br />
Basic price/kg<br />
136,50 114,71<br />
13,65 11,47<br />
10 kg<br />
Basic price/kg<br />
136,50 114,71<br />
13,65 11,47<br />
20 kg<br />
259,00 217,65<br />
12,95 10,88<br />
20 kg<br />
259,00 217,65<br />
12,95 10,88<br />
156<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Acryl Casting Resin<br />
The acrylic system HP-A15GB is a medium-viscosity 2-component combination of acrylic resin and mineral<br />
powder on a solvent-free water basis.<br />
Features and Benefits:<br />
• Low heat generation<br />
• Easy to process, odorless<br />
• Addition of up to 5% water is possible<br />
• Can be mixed with dry color pigments<br />
• Thickening with cotton flakes is possible<br />
• Creation of decorative and technical elements<br />
• Production of sculptures and reliefs<br />
• Creation of detailed models<br />
• Duplication of objects<br />
Product Properties:<br />
HP-A15GB<br />
Colouring<br />
beige<br />
Mixing ratio weight 100 parts Acrylic / 300 parts mineral powder<br />
Mixed viscosity<br />
medium viscous<br />
Pot life (at 20°C) minutes<br />
10 - 20<br />
Demouldable after (at 20°C) minutes<br />
60 - 120<br />
Mechanically resistant (at 20°C) hours (h)<br />
8<br />
Full cure (at 20°C) hours (h)<br />
24<br />
Hardness Shore D<br />
84<br />
Article: HP-A15GB<br />
Processing time 10 - 20 min<br />
Mold and Casting Resins<br />
Price €<br />
(incl. hardener)<br />
2 kg<br />
Basic price/kg<br />
4 kg<br />
Basic price/kg<br />
20 kg<br />
Basic price/kg<br />
100 kg<br />
Basic price/kg<br />
incl. VAT net<br />
17,99 15,12<br />
9,00 7,56<br />
29,99 25,20<br />
7,50 6,30<br />
119,29 100,24<br />
5,96 5,01<br />
525,00 441,18<br />
5,25 4,41<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 157
In-Mould Coating<br />
The In-Mould Coating (IMC) is a specially developed 2K polyurethane varnish for<br />
coating fibre-reinforced plastic components in negative moulds and it is preferably<br />
used for coating epoxy laminates.<br />
Whether for highly transparent visible carbon parts, complex vehicle components or<br />
special colours in flight model construction - our IMC-Varnish enables the complete<br />
manufacturing of the fibre-composite component in the mould. At the end of the<br />
process, you will get a painted component.<br />
Our In-Mould Coatings are available in the colour systems of RAL or adjusted to your<br />
own colour sample. Highly transparent versions for design fabrics are also available.<br />
Principle:<br />
The painting of the moulded part takes place in the mould or in the negative mould.<br />
Instead of grinding and painting the component after de-moulding, the painting already<br />
takes place in the mould on the later visible side of the component.<br />
Due to the specially developed formula, the applied PU-Varnish can be easily laminated<br />
even after weeks and therefore, even a larger batch production is possible.<br />
Especially productions with the Vacuum-Infusion Method or the Vacuum-Press Method<br />
can benefit from this principle.<br />
Colour / Coating<br />
The In-Mould Coating is applied with a spray gun or with a soft brush. Our Epoxy<br />
High Load Resin System HP-E29L, HP-E56L or HP-E111L as well as the Injection<br />
Resin System HP-E3000GL and HP-E300RI ensure an especially high adhesion<br />
between the layers.<br />
Advantages:<br />
1. Significant cost reduction ...<br />
... due to the immense time savings of up to 80% as well as the reduction of additional<br />
work steps. Furthermore, compared to conventional gel coats the low layer<br />
coating of the IMC reduces not only costs but also the total weight of the component.<br />
2. High adhesion between the layers ...<br />
... due to the special formula of the system. It enables a subsequent further processing<br />
after applying the In-Mould Coating even after weeks. In combination with<br />
our Epoxy High Load Resin Systems it forms a “real“ chemical bond.<br />
3. Optimised surface quality ...<br />
... available in many RAL colours or in transparent for visible carbon parts. High<br />
UV- and light stability as well as a good resistance to weathering.<br />
In combination with the MTI ® -Hose (membrane-wrapped suction line) the respective<br />
advantages are combined and therefore unite the cost reduction with a high<br />
level of process stability!<br />
Convince yourself and have a look at our products!!<br />
Follow this QR-Code to a detailed instruction of the IMC/MTI®-Method!<br />
158<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Features and Benefits:<br />
• High quality coatings for In-Mould coating (first layer in female moulds)<br />
• Userfriendly processing due to the possibility to laminate it again<br />
• Available in different colours (RAL) or Neon Colours<br />
• Good uv-stability, wax free<br />
• Forms chemical compounds with all epoxy-resins (laminating, covering and infusion) from HP-Textiles<br />
• For spraying, manual application with a paint-brush is also possible<br />
Consumtion per Layer 70 - 80 g/m² (wet)<br />
results to approx. 40 - 50 g/m² (dry)<br />
Recommended number of coats 2 - 3 (depends on the coverage of the colour)<br />
1 liter mixture is sufficient for 4 - 5 m² surface in 3 layers with each 75g/m² (wet)<br />
IN-Mould Coating<br />
Processing time: 30min<br />
Standard Colours:<br />
Special Colours:<br />
Price €<br />
(incl. hardener)<br />
750ml resin<br />
Basic price/ltr.<br />
1500ml resin<br />
Basic price/ltr.<br />
7500ml resin<br />
Basic price/ltr.<br />
incl. VAT net<br />
23,90 20,08<br />
31,87 26,78<br />
43,90 36,89<br />
29,27 24,60<br />
169,50 142,44<br />
22,60 18,99<br />
HP-IMC-0000<br />
HP-IMC-1<strong>02</strong>1<br />
HP-IMC-2004<br />
HP-IMC-3000<br />
HP-IMC-50<strong>02</strong><br />
HP-IMC-9003<br />
HP-IMC-9004<br />
RAL 0000 transparent<br />
(carbon design parts)<br />
RAL 1<strong>02</strong>1 rape yellow<br />
RAL 2004 pure orange<br />
RAL 3000 flame red<br />
RAL 50<strong>02</strong> ultramarine blue<br />
RAL 9003 signal white<br />
RAL 9004 signal black<br />
Price €<br />
(incl. hardener)<br />
1500ml resin<br />
Basic price/ltr.<br />
7500ml resin<br />
Basic price/ltr.<br />
incl. VAT<br />
Would you like to order a<br />
special colour?<br />
net<br />
48,31 40,60<br />
32,21 27,07<br />
177,31 149,00<br />
23,64 19,87<br />
** From 1500g almost all colours are<br />
Colour / Coating<br />
Delivery in approx:<br />
4 - 5 working days<br />
Clear coat glossy 400 ml | 1KL<br />
High-quality topcoat based on acrylic and nitro with excellent adhesive properties. High functionality<br />
on epoxy resins from HP-Textiles.<br />
Characteristics and application:<br />
• Compatible with epoxy resins for surface or casting applications<br />
• Excellent bonding properties<br />
• Good spreading properties for smooth and glossy surfaces<br />
• Fast drying<br />
• Lightfast, UV-resistant (non-yellowing)<br />
• Scratch-resistant, shock-proof and impact-resistant<br />
• When fully dried resistant to water and diluted acid and alkalis<br />
• Limited resistance to gasolines<br />
Apply at a distance about 25 cm from the surface in several thin layers<br />
We recommend cleaning the surface before applying, e.g. with thinner XB<br />
(page 174).<br />
Price<br />
€/piece<br />
400ml<br />
HP-KL400<br />
incl. VAT<br />
net<br />
8,99 7,55<br />
7,99 6,71<br />
7,49 6,29<br />
6,99 5,87<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 159
HP-PUR-PLUS / PUR-Top-Coat<br />
HP-PUR-PLUS is a high-quality, solvent-based 2K PUR topcoat for glossy and weather-resistant<br />
coatings. Ideally suited for coatings in industry, in boat and sports equipment construction<br />
as well as pond and pool coatings, and much more.<br />
Brilliant colors<br />
... for the highest demands and long-lasting UV protection !!!<br />
Available in almost all RAL colors.<br />
Very good durability<br />
... against weather influences and permanent water pollution.<br />
Easy application<br />
... in the rolling and coating process.<br />
For new coatings or renovations in combination with ours Epoxy resins.<br />
Features and Benefits:<br />
Colour / Coating<br />
• Available in almost all RAL colors<br />
• Forms a shiny surface with high abrasion resistance<br />
• Suitable for coating machines, deck structures, furniture, containers, GRP parts, pond and pool coatings<br />
• Very good water and chemical resistance (if the dosage regulations for the chemicals used for swimming<br />
pool hygiene are observed), suitable for permanent water pollution<br />
• Long-lasting color stability thanks to good UV protection<br />
• Excellent fullness of the paint film<br />
• Ready to roll and brush (spraying process in the commercial area possible by adding thinner HP-IMC-X)<br />
• Available in 1.5kg containers (sufficient for approx. 10m²) and in 3kg containers (sufficient for approx. 20m²)<br />
Important NOTE: Does not adhere to PE, PP, PTFE, ... Not suitable for new polyester coatings.<br />
Processing information:<br />
The HP-PUR-PLUS can be applied directly to the fresh epoxy laminate (epoxy resins from HP-Textiles). For an<br />
optimal bond without intermediate sanding, the last layer of the underlying epoxy coating must not be older than<br />
24 hours (at a maximum ambient temperature of 20 ° C). A solid but still slightly sticky surface is ideal. If coating<br />
is carried out after 24 hours, the entire surface must be sanded, as otherwise the adhesion may be too low.<br />
Instructions on the application process:<br />
The HP-PUR-PLUS is ready to roll and brush. For application, we recommend our painting rollers HP-L1032<br />
(width 25cm) and HP-L1034 (width 10cm) or suitable painting brushes or surface brushes. Conventional paint<br />
rollers, available in hardware stores cannot be recommended due to the formation of bubbles when applied!<br />
Technical specifications:<br />
Coloring:<br />
According to customer requirements in (almost) all RAL colors<br />
Mixing ratio:<br />
100 parts resin / 50 parts hardener<br />
Pot life (processing time): approx. 3 - 5 hours (at 20 ° C)<br />
Processing temperature OPTIMAL: 18 - 25 ° C<br />
MINIMUM processing temperature: 15 ° C (air); 70% relative humidity<br />
Consumption: approx. 150 g / m²<br />
Recommended layers:<br />
1 - 2 (depending on the color and the quantity applied)<br />
160<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
HP-PUR-PLUS-TEXTUR / PUR-Top-Coat<br />
HP-PUR-PLUS-TEXTUR is a high-quality two-component 2K PUR topcoat (containing solvent)<br />
for non-slip and weatherproof coatings.<br />
Ideally suited for textured finishes of boat and sport equipment, truck refinish, industry etc.<br />
Brilliant colors<br />
... for the highest demands and long-lasting UV protection !!!<br />
Available in almost all RAL colors.<br />
Very good durability<br />
...to weathering and to mechanical loads<br />
Easy application<br />
... in the rolling and coating process.<br />
For new coatings or renovations in combination with ours Epoxy resins.<br />
Features and Benefits:<br />
• Deliverable in nearly all RAL colours<br />
• Results in a textured non-slip surface<br />
• Suitable for coating tank surfaces, boat and ship ceilings, surfboards, walking areas on industrial<br />
floors or in swimming pools, etc.<br />
• Good resistance to water and chemicals (if the dosage regulations for the chemicals used for swimming<br />
pool hygiene are observed)<br />
• Long-lasting colour stability<br />
• Good filling properties able to hide small substrate defects<br />
• Ready for rolling and brushing (spraying in the commercial sector is possible by adding the thinner HP-<br />
IMC-X)<br />
• Available in 1.5kg containers (sufficient for approx. 7m²) and in 3kg containers (sufficient for approx. 13m²)<br />
Colour / Coating<br />
Important NOTE: Does not adhere to PE, PP, PTFE, ... Not suitable for new polyester coatings.<br />
Processing information:<br />
The HP-PUR-PLUS-TEXTUR can be applied directly to the fresh epoxy laminate (epoxy resins from HP-Textiles).<br />
For an optimal bond without intermediate sanding, the last layer of the underlying epoxy coating must not be older<br />
than 24h (at max. 20°C ambient temperature). A firm but still slightly sticky substrate is ideal. If the coating is applied<br />
after 24 hours, the entire substrate must be sanded, otherwise the adhesion may be too low.<br />
Instructions on the application process:<br />
For application we recommend our polyamide-rollers HP-L1016 (width 10cm) HP-L1017 (width 15cm) and HP-<br />
L1<strong>02</strong>2 (width 25cm).<br />
Technical specifications:<br />
Coloring:<br />
According to customer requirements in (almost) all RAL colors<br />
Mixing ratio:<br />
100 parts resin / 50 parts hardener / 15 - 30 parts HP-IMC-X<br />
Pot life (processing time): approx. 6 - 8 hours (at 20 ° C)<br />
MINIMUM processing temperature: 15 ° C (air); up to 70% relative humidity<br />
Consumption:<br />
approx. 200 - 250 g / m² (depending on the condition of the substrate<br />
and type of application)<br />
Recommended layers:<br />
1 - 2 (depending on colour tone and application quantity)<br />
Walkable:<br />
after 4 - 5 days<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 161
HP-PUR-PLUS and HP-PUR-TEXTUR<br />
available colours:<br />
RAL1000 C RAL1<strong>02</strong>4 B RAL3003 E RAL4003 C RAL5013 E RAL6009 D RAL6032 D RAL7<strong>02</strong>2 A RAL7047 C RAL9001 C<br />
RAL1001 D RAL1<strong>02</strong>7 G RAL3004 E RAL4004 D RAL5014 B RAL6010 D RAL6033 B RAL7<strong>02</strong>3 B RAL8000 A RAL90<strong>02</strong> C<br />
RAL10<strong>02</strong> E RAL1<strong>02</strong>8 G RAL3005 E RAL4005 D RAL5015 D RAL6011 C RAL6034 B RAL7<strong>02</strong>4 B RAL8001 A RAL9003 C<br />
RAL1003 G RAL1032 F RAL3007 E RAL4006 C RAL5017 D RAL6012 E RAL6037 F RAL7<strong>02</strong>6 A RAL80<strong>02</strong> A RAL9004 A<br />
RAL1004 G RAL1033 F RAL3009 B RAL4007 D RAL5018 C RAL6013 B RAL7000 C RAL7030 B RAL8003 F RAL9005 B<br />
RAL1005 G RAL1034 F RAL3011 C RAL4008 C RAL5019 C RAL6014 E RAL7001 B RAL7031 C RAL8004 B RAL9006 E<br />
RAL1006 G RAL1037 G RAL3012 C RAL4009 B RAL5<strong>02</strong>0 E RAL6015 A RAL70<strong>02</strong> A RAL7032 C RAL8007 E RAL9007 B<br />
RAL1007 G RAL2000 G RAL3013 F RAL4010 C RAL5<strong>02</strong>1 C RAL6016 C RAL7003 B RAL7033 B RAL8008 D RAL9010 C<br />
RAL1011 B RAL2001 G RAL3014 D RAL5000 B RAL5<strong>02</strong>2 E RAL6017 F RAL7004 B RAL7034 B RAL8011 E RAL9011 A<br />
RAL1012 F RAL20<strong>02</strong> G RAL3015 C RAL5001 B RAL5<strong>02</strong>3 B RAL6018 F RAL7005 B RAL7035 C RAL8012 B RAL9016 C<br />
RAL1013 C RAL2003 F RAL3016 F RAL50<strong>02</strong> E RAL5<strong>02</strong>4 B RAL6019 C RAL7006 A RAL7036 B RAL8014 D RAL9017 A<br />
RAL1014 C RAL2004 G RAL3017 E RAL5003 D RAL6000 B RAL6<strong>02</strong>0 A RAL7008 A RAL7037 B RAL8015 A RAL9018 C<br />
RAL1015 C RAL2008 G RAL3018 E RAL5004 C RAL6001 E RAL6<strong>02</strong>1 C RAL7009 A RAL7038 B RAL8016 C RAL9<strong>02</strong>2 B<br />
RAL1016 F RAL2009 G RAL3<strong>02</strong>0 G RAL5005 D RAL60<strong>02</strong> F RAL6<strong>02</strong>2 D RAL7010 B RAL7039 B RAL8017 A RAL9<strong>02</strong>3 B<br />
RAL1017 E RAL2010 G RAL3<strong>02</strong>2 F RAL5007 B RAL6003 A RAL6<strong>02</strong>4 E RAL7011 B RAL7040 C RAL8019 A<br />
RAL1018 F RAL2011 G RAL3<strong>02</strong>7 D RAL5008 A RAL6004 D RAL6<strong>02</strong>5 F RAL7012 B RAL7042 B RAL8<strong>02</strong>2 B<br />
RAL1019 B RAL2012 F RAL3<strong>02</strong>8 G RAL5009 C RAL6005 C RAL6<strong>02</strong>6 D RAL7013 A RAL7043 A RAL8<strong>02</strong>3 B<br />
Colour / Coating<br />
RAL1<strong>02</strong>0 C RAL3000 F RAL3031 F RAL5010 D RAL6006 A RAL6<strong>02</strong>7 C RAL7015 A RAL7044 B RAL8<strong>02</strong>4 A<br />
RAL1<strong>02</strong>1 G RAL3001 F RAL4001 D RAL5011 C RAL6007 D RAL6<strong>02</strong>8 D RAL7016 A RAL7045 C RAL8<strong>02</strong>5 A<br />
RAL1<strong>02</strong>3 G RAL30<strong>02</strong> F RAL40<strong>02</strong> D RAL5012 C RAL6008 D RAL6<strong>02</strong>9 E RAL7<strong>02</strong>1 A RAL7046 B RAL8<strong>02</strong>8 B<br />
HP-PP HP-PP-TT 1,5 ltr HP-PP HP-PP-TT 3 ltr<br />
PUR-PLUS TEXTUR PUR-PLUS TEXTUR<br />
Category Price € incl. VAT net<br />
Category Price € incl. VAT net<br />
transparent<br />
1,5 ltr<br />
58,95 49,54<br />
transparent<br />
3 ltr<br />
95,00 79,83<br />
Basic price/ltr<br />
39,30 33,03<br />
Basic price/ltr<br />
31,67 26,61<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
1,5 ltr<br />
Basic price/ltr<br />
1,5 ltr<br />
Basic price/ltr<br />
1,5 ltr<br />
Basic price/ltr<br />
1,5 ltr<br />
Basic price/ltr<br />
1,5 ltr<br />
Basic price/ltr<br />
1,5 ltr<br />
Basic price/ltr<br />
1,5 ltr<br />
Basic price/ltr<br />
62,48<br />
41,65<br />
64,01<br />
42,67<br />
66,52<br />
44,35<br />
69,27<br />
46,18<br />
71,28<br />
47,52<br />
75,90<br />
50,60<br />
80,27<br />
53,51<br />
52,50<br />
35,00<br />
53,79<br />
35,86<br />
55,90<br />
37,27<br />
58,21<br />
38,81<br />
59,90<br />
39,93<br />
63,78<br />
42,52<br />
67,45<br />
44,97<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
3 ltr<br />
Basic price/ltr<br />
3 ltr<br />
Basic price/ltr<br />
3 ltr<br />
Basic price/ltr<br />
3 ltr<br />
Basic price/ltr<br />
3 ltr<br />
Basic price/ltr<br />
3 ltr<br />
Basic price/ltr<br />
3 ltr<br />
Basic price/ltr<br />
100,23<br />
33,41<br />
104,18<br />
34,73<br />
108,98<br />
36,44<br />
114,23<br />
38,08<br />
118,94<br />
39,65<br />
126,90<br />
42,30<br />
135,20<br />
45,07<br />
84,23<br />
28,08<br />
87,55<br />
29,18<br />
91,58<br />
30,53<br />
95,99<br />
31,99<br />
99,95<br />
33,32<br />
106,64<br />
35,55<br />
113,61<br />
37,87<br />
162<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
HP-PUR-PLUS and HP-PUR-TEXTUR<br />
We also offer the common pond and pool colors in small containers of 750 ml:<br />
Pond and Pool Colours<br />
Price €<br />
(incl. hardener)<br />
750ml resin<br />
Basic price/ltr.<br />
incl. VAT<br />
net<br />
43,90 36,89<br />
58,53 49,19<br />
Colour<br />
RAL 1014 Ivory<br />
RAL 5012 Light blue<br />
RAL 5018 Turquoise blue<br />
RAL 6<strong>02</strong>0 Chrome oxide green<br />
RAL 9003 Signal white<br />
Colour<br />
RAL 7016 Anthracite gray<br />
RAL 7035 Light gray<br />
RAL 9005 Deep black<br />
RAL 9004 Signal black<br />
Colour / Coating<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 163
HP-PUR / PUR-Top-Coat<br />
Two-component polyurethane varnish for high quality and weather<br />
proof coatings with intense gloss.<br />
Features and Benefits:<br />
• Professional two-component polyurethane coating finish for<br />
industrial paintings<br />
• Top coat for external weathering without a constant contact to<br />
water<br />
• Suitable for coatings of machines, ship parts, furniture,<br />
containers and especially for FRP surfaces<br />
• Ready to be sprayed, manual application with soft paint-brush<br />
or flocked roller is also possible<br />
• Available in almost all RAL-colours with high UV-stability<br />
• Adjustable in viscosity by adding HP-IMC-X Thinner<br />
►HP-IMC-X thinner can be found on page 174<br />
Colour / Coating<br />
Important advice:<br />
Unsuitable for applications under water! No adhesion on PE, PP, PTFE, ...<br />
Spray Viscosity (flow cup DIN 4): 17 - 18 sec.<br />
Drying times at 20°C<br />
Dust-free<br />
20 - 30 minutes<br />
Non-sticky 4 - 5 hours<br />
Complete drying process 48 hours<br />
(4mm DIN at 20°C)<br />
HP-PUR<br />
Processing time: approx. 3 hours<br />
Standard Colours:<br />
Special Colours:<br />
Price €<br />
(incl. hardener)<br />
625ml resin<br />
Basic price/ltr.<br />
incl. VAT net<br />
22,49 18,90<br />
35,99 30,24<br />
Price €<br />
(incl. hardener)<br />
1250ml resin<br />
Basic price/ltr.<br />
incl. VAT net<br />
42,90 36,05<br />
34,32 28,84<br />
1250ml resin<br />
Basic price/ltr.<br />
38,90 32,69<br />
31,12 26,15<br />
6250ml resin<br />
Basic price/ltr.<br />
154,90 130,17<br />
24,78 20,83<br />
6250ml resin<br />
Basic price/ltr.<br />
149,90 125,97<br />
23,98 20,16<br />
Article<br />
HP-PUR-0000<br />
HP-PUR-1<strong>02</strong>1<br />
HP-PUR-2004<br />
HP-PUR-3000<br />
HP-PUR-50<strong>02</strong><br />
HP-PUR-9003<br />
HP-PUR-9004<br />
Colour<br />
RAL 0000 transparent<br />
(carbon design parts)<br />
RAL 1<strong>02</strong>1 rape yellow<br />
RAL 2004 pure orange<br />
RAL 3000 flame red<br />
RAL 50<strong>02</strong> ultramarinblue<br />
RAL 9003 signal white<br />
RAL 9004 signal black<br />
Would you like to order a<br />
special colour?<br />
** From 1500g almost all colours are<br />
available according to RAL chart.<br />
164<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Colour Pastes - according to RAL card -<br />
The opaque color pastes of the HP-FP series are made of high-quality pigments, castor oil and selected surfactants.<br />
The color pastes are free from solvents and volatile organic compounds.<br />
Features and Benefits:<br />
• Suitable for coloring solvent-free epoxy and polyurethane systems<br />
• Due to high pigment concentration very efficient in consumption<br />
• Contains surfactants and dispersants, therefore compatible with many basic materials<br />
• Based on exclusively colourfast pigments<br />
• Great color fidelity and reproducibility<br />
• Available in many RAL colours or on customer request<br />
Article: HP-FP<br />
Colour Pastes, covering<br />
Category Price € incl. VAT net<br />
A 350g 13,90 11,68<br />
Basic price/kg<br />
B 350g 14,95 12,56<br />
Basic price/kg<br />
C 350g 15,99 13,44<br />
Basic price/kg<br />
39,71 33,37<br />
42,71 35,88<br />
45,68 38,40<br />
Mixing ratio (prescription):<br />
Coatings:<br />
10 - 15% (weight parts)<br />
Cover layer systems:<br />
5 - 10% (weight parts)<br />
Casting & Laminating Systems: 1 - 5% (parts by weight)<br />
** To increase the color stability, we recommend using an additional transparent<br />
topcoat HP-E30TDS-0000 incl. approx. 3% UV stabilizer HP-BEL91.<br />
These products can be ordered optionally. **<br />
D<br />
E<br />
F<br />
350g<br />
Basic price/kg<br />
350g<br />
Basic price/kg<br />
350g<br />
Basic price/kg<br />
16,99<br />
48,54<br />
19,20<br />
54,85<br />
20,99<br />
59,97<br />
14,28<br />
40,80<br />
16,13<br />
46,08<br />
17,64<br />
50,40<br />
RAL1015 B RAL3015 B RAL5012 B RAL6037 D RAL8001 B<br />
RAL1016 E RAL3017 D RAL5015 B RAL7012 B RAL8017 B<br />
RAL1018 C RAL4008 F RAL6018 F RAL7016 B RAL9001 B<br />
RAL2004 F RAL4010 E RAL6<strong>02</strong>6 C RAL7030 B RAL9003 A<br />
RAL3001 E RAL50<strong>02</strong> D RAL6<strong>02</strong>9 D RAL7035 B RAL9005 A<br />
Dye<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 165
Colour Pastes, opaque<br />
The opaque pigment pastes consist of high quality pigments, oil and certain tensides. The pigment pastes are free<br />
of solvents and volatile organic compounds. The pigment pastes are used for colouring of coatings.<br />
Standard colours:<br />
red brown -BR black -S<br />
blue -BL white -W<br />
yellow -GE red -R<br />
green -GR<br />
purplish violet -SV telemagenta -TM<br />
burgundy violet -BV turquoise blue -TB<br />
traffic purple -VP turquoise gree -TG<br />
rose -RE<br />
Article: BM-FPN<br />
Colour Pigments: red brown, blue, green,<br />
black, white<br />
Article: BM-FPN<br />
Colour Pigments: yellow, red<br />
Price<br />
€/piece<br />
20g<br />
Basic price/100g<br />
incl. VAT net Sufficient for<br />
2,95 2,48 100 - 400 g<br />
14,75 12,40<br />
Price<br />
€/piece<br />
20g<br />
Basic price/100g<br />
incl. VAT net Sufficient for<br />
2,95 2,48 100 - 400 g<br />
14,75 12,40<br />
100g<br />
Basic price/100g<br />
5,95 5,00 500 - 2000 g<br />
5,95 5,00<br />
100g<br />
Basic price/100g<br />
5,95 5,00 500 - 2000 g<br />
5,95 5,00<br />
200g<br />
Basic price/100g<br />
10,90 9,16 1 - 4 kg<br />
5,45 4,58<br />
200g<br />
Basic price/100g<br />
10,90 9,16 1 - 4 kg<br />
5,45 4,58<br />
Dye<br />
500g<br />
Basic price/100g<br />
19,90 16,72 2,5 - 10 kg<br />
3,98 3,34<br />
500g<br />
Basic price/100g<br />
25,99 21,84 2,5 - 10 kg<br />
5,19 4,36<br />
1kg<br />
Basic price/100g<br />
29,90 25,13 5 - 20 kg<br />
2,99 2,51<br />
1kg<br />
Basic price/100g<br />
44,99 37,81 5 - 20 kg<br />
4,49 3,77<br />
Characteristics and application:<br />
• Suitable for colouring solvent free epoxy resin and polyurethane systems<br />
• Due to its high pigment concentration very economical in consumption<br />
• good colour fidelity and reproducibility<br />
• Good colouring<br />
Colour Pastes,<br />
Article: BM-FPN-SET-01<br />
Colour Pigments - Set of 7 x 20 g -<br />
red brown black<br />
blue white<br />
yellow red<br />
green<br />
Set of 7 x 20 g Pigment paste (liquid)<br />
Article: BM-FPN-Set-<strong>02</strong><br />
Colour Pigments - Set of 7 x 20 g -<br />
purplish violet telemagenta<br />
burgundy violet turquoise blue<br />
traffic purple turquoise gree<br />
rose<br />
BM-FPN-SET-01/-Set-<strong>02</strong><br />
Colour Pigments - 7 x 20 g -<br />
Mixing ratio (guide formulation):<br />
Price<br />
€/Set<br />
Set 1 / Set 2<br />
incl. VAT<br />
net<br />
18,90 15,88<br />
Coatings:<br />
Top coat systems:<br />
Casting and laminate resin:<br />
10 - 15 % (by weight)<br />
5 - 10 % (by weight)<br />
1 - 5 % (by weight)<br />
166<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Colour Pastes, metallic<br />
These extraordinary metallic color pastes of the HP-FMP series are made from high<br />
quality pigments, castor oil and selected tensides. The color pastes are free from<br />
solvents and volatile organic compounds.<br />
Standard colours:<br />
Pearl White FMP-PW Tangerine Orange FMP-TO Bubble Pink FMP-BP<br />
Silver Black FMP-SB Yellow Gold FMP-YG Bright Blue FMP-BB<br />
Chocolate Brown FMP-CB Wine Red FMP-WR Spring Green FMP-SG<br />
Bronze FMP-B Light Plum FMP-LP<br />
BM-FMP<br />
PET-Can<br />
Colour Pastes, metallic - 30 g -<br />
Price<br />
€/piece<br />
30g<br />
Basic price/100g<br />
350g<br />
Basic price/100g<br />
incl. VAT<br />
net<br />
9,98 8,39<br />
33,27 27,27<br />
49,90 41,93<br />
14,26 11,98<br />
Characteristics and application:<br />
• For coloring solvent-free epoxy and polyurethane systems<br />
• Ideal for casting applications such as River tables, jewelry making<br />
and much more<br />
• Very efficient in consumption thanks to the high pigment concentration<br />
• Contains surfactants and dispersants, therefore compatible with<br />
many base materials<br />
• Based on exclusively color-fast pigments<br />
• Great color fidelity and reproducibility<br />
Mixing ratio fir casting applications: 1-3 % (weight ratio)<br />
We recommend the following resin systems for our Metallic Colour Pastes:<br />
HP-E25DM; HP-E25D; HP-E50GB; HP-E300GB<br />
BEL31: To achieve the color effect, BEL31 can be stirred into the resin system. The additive is stirred into the<br />
finished system for thixotropy and thus significancy improves the expiration and setting properties.<br />
Dye<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 167
Colour Pigments, opaque<br />
The opaque colour pigments of the HP-FD series are used for colouring<br />
layers (gel and topcoats). They are suitable for laminating and casting<br />
resins.<br />
Article: HP-FD<br />
Colour Pigments<br />
Standard colours:<br />
black HP-RS universal red HP-ER<br />
Price<br />
€/piece<br />
20g<br />
Basic price/100g<br />
100g<br />
Basic price/100g<br />
500g<br />
Basic price/100g<br />
1kg<br />
Basic price/100g<br />
incl. VAT net Sufficient for<br />
1,95 1,64 100 - 400g<br />
9,75 8,20<br />
5,95 5,00 500 - 2000g<br />
5,95 5,00<br />
12,95 10,88 2,5 - 10kg<br />
2,59 2,18<br />
21,90 18,40 5 - 20kg<br />
2,19 1,84<br />
dark grey HP-DG orange HP-OR<br />
light grey HP-HG light ocher french HP-LOF<br />
titanium white HP-TW yellow HP-EG<br />
terra di sienna * HP-TS real green HP-GR<br />
umbra natural HP-UN moss-green HP-MG<br />
red ocher french HP-ROF ultramarine blue HP-UB<br />
english red HP-ENR crystal blue HP-KB<br />
* terra di siena can affect the curing process of polyester resins in a<br />
negative way<br />
Characteristics and application:<br />
• Colour pigments for gel-, topcoats, laminating or casting resins<br />
• Good light stability<br />
• Good colouring<br />
• Suitable for unsaturated polyester resins, epoxy resins, vinylester, polyurethane<br />
Dye<br />
We recommend tests beforehand. Pigments may reduce pot-life times.<br />
To prevent settling, we recommend the combination with thixotroping agent HP-PK22 (page 178).<br />
Fluorescent pigments -Neon-<br />
The opaque colour pigments are used for colouring of top layers (gel or top coats). They are also applicable for<br />
laminate and casting resins.<br />
Article: BM-FL<br />
Colour Pigments<br />
Price<br />
€/piece<br />
20g<br />
Basic price/100g<br />
100g<br />
Basic price/100g<br />
500g<br />
Basic price/100g<br />
1kg<br />
Basic price/100g<br />
incl. VAT<br />
net<br />
6,95 5,84<br />
13,90 11,68<br />
15,95 13,40<br />
10,63 8,93<br />
49,90 41,93<br />
9,98 8,39<br />
79,90 67,14<br />
7,99 6,71<br />
Characteristics and application:<br />
• Applicable as colour pigments in top coat systems (gel- and<br />
topcoats) or for colouring of laminate and casting systems.<br />
• Dosage up to 20%<br />
• Medium light stability (wool scale 4/8)<br />
• Bright colouring (neon)<br />
• Suitable for epoxy resins and PU-coatings<br />
Note:<br />
We recommend prior trials. Due to the rather low light stability of fluorescent<br />
pigments, we recommend high layer thicknesses and a protective<br />
coating (clear coat). Fluorescent pigments afterglow in the dark.<br />
Standard colours:<br />
orange -BR red -S<br />
yellow -BL green -W<br />
168<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Transparent colourant (liquid)<br />
High concentrated, transparent colouring, easy doseable liquid with useful dropping cap.<br />
Article: BM-FTP<br />
Transparent colourant (liquid)<br />
Standard colours:<br />
brown -BR red -S<br />
Price<br />
€/piece<br />
20ml<br />
Basic price/liter<br />
500ml<br />
Basic price/liter<br />
5000ml<br />
Basic price/liter<br />
incl. VAT net<br />
2,95 2,48<br />
147,50 0,13<br />
60,57 50,90<br />
121,14 101,79<br />
336,29 282,60<br />
67,26 56,52<br />
blue -BL pink -W<br />
turquoise-bright -GE red-purple -R<br />
sunny-yellow -GR black -SW<br />
green -G<br />
Characteristics and application:<br />
• Due to high colourant concentration very economical<br />
in consumption<br />
• Good colouring<br />
• Suitable for transparent resin systems<br />
• Added quantity depends on desired colour intensity<br />
Transparent colourant (liquid),<br />
Set of 7 x 20 ml<br />
BM-FTP-SET<br />
Dye<br />
Article: BM-FTP-SET<br />
Transparent colourant - Set of 7 x 20 mlbrown<br />
red<br />
blue pink<br />
turquoise-bright red-purple<br />
sunny-yellow<br />
Price<br />
€/piece<br />
Set<br />
incl. VAT<br />
net<br />
18,90 15,88<br />
Glitter Set<br />
Glitter decoration sprinkle in useful sprinkle tubes for creative design in casting objects.<br />
Characteristics and application:<br />
• Intensive reflection effect<br />
• Suitable for transparent casting objects.<br />
Article: BM-GL<br />
Glitter - Set of 6 x 3 g -<br />
BM-GL<br />
Price<br />
€/piece<br />
Set<br />
incl. VAT<br />
net<br />
2,99 2,51<br />
red green<br />
blue gold<br />
purple silver<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 169
OVERVIEW MOULD RELEASE AGENTS<br />
Casting<br />
Resin<br />
SUITABLE FOR<br />
APPLICATION WITH<br />
Products<br />
… fibre<br />
wet-out<br />
… sticking<br />
together<br />
… in female<br />
moulds<br />
(gelcoat)<br />
… on top<br />
(topcoat)<br />
… casting<br />
resin<br />
… embedding<br />
...fine-pored<br />
sponge<br />
...spray gun<br />
HP-BM17 *<br />
Wax Dispersion, liquid<br />
+ + + - + ++ + ++<br />
HP-G *<br />
Priming Wax, viscous C C C C<br />
- + - -<br />
Release Agents<br />
HP-PVA *<br />
Release Film, liquid<br />
HP-CX7 *<br />
Carnauba-Wax, pasty<br />
HP-HGR5 *<br />
High-Gloss Relase Agent<br />
++ ++ ++ ++ - + ++ ++<br />
++ ++ ++ + + ++ - -<br />
++ ++ ++ ++ - + ++ ++<br />
BM-SS<strong>02</strong><br />
Silicone Spray<br />
++ - - - ++ ++ - ++<br />
++<br />
= very good applicable + = applicable o = conditionally applicable - = not provided<br />
* free of Silicone and PTFE<br />
Durability at + 10 ° C to + 30 ° C at least 6 months (HP-CX7 = 12 months).<br />
Liquid release agents: The contents of the container must be stirred before and during processing.<br />
Bring to room temperature before use.<br />
170<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
FEATURES POLISHABILITY CONSUMPTION DRYING TIME TEMPERATURES<br />
g/m²<br />
minutes at<br />
20°C<br />
...APPLICATION<br />
min.<br />
(recommended) °C<br />
… max.<br />
loadability<br />
°C<br />
Applicable on smooth, non-porous<br />
surfaces. Usable as primer for PVA.<br />
Residues can be cleaned with white<br />
spirit or thinner XB.<br />
+ 30 15 15 80<br />
NO single release agent !<br />
Primer for PVA.<br />
Residues can be cleaned with white<br />
spirit or thinner XB.<br />
O 30 5 - 15 15 100<br />
Generates very safe release film.<br />
Priming with HP-G (or HP-BM17 or<br />
HP-CX7) is necessary. Residues can<br />
be cleaned with water.<br />
Polish in several layers. High-gloss<br />
release agent. Usable as primer for<br />
PVA. Residues can be cleaned with<br />
white spirit or thinner XB.<br />
Water based – 100% free of solvents!<br />
Very good release effect with PUR<br />
(IMC). Residues can be cleaned with<br />
water.<br />
- 60 5 - 10 15 100<br />
++ 15 - 20 10 - 15 20 80<br />
++ 20 - 25 5 - 15 15 150<br />
Release Agents<br />
Release agent for GfK and silicone<br />
moulds<br />
Care agent for cured silicone moulds<br />
- 10 / 15 150<br />
C = in combination with + or ++ Rev. 3.3<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 171
Mould Release Agents<br />
Article: HP-BM17<br />
Mould Release Agent<br />
Thermal Stability: until 80°C<br />
Consumption: approx. 30ml/m² (depending on the surface)<br />
Price<br />
€/piece<br />
200ml<br />
Basic price/ltr.<br />
500ml<br />
Basic price/ltr.<br />
1000ml<br />
Basic price/ltr.<br />
5000ml<br />
Basic price/ltr.<br />
incl. VAT net<br />
6,78 5,70<br />
33,90 28,50<br />
9,98 8,39<br />
19,96 16,78<br />
14,90 12,52<br />
14,90 12,52<br />
46,29 38,90<br />
9,26 7,78<br />
Characteristics and Application:<br />
HP-BM17 has to be applied sparingly with a soft cotton cloth<br />
(rotary motions). After a short drying time (approx.15 minutes)<br />
the surface can be polished with a dry and clean cotton cloth to<br />
high gloss. The mould should have an evenly gloss which is free<br />
from any streaks.<br />
Prior to the first mould release, new moulds are preprocessed<br />
with three or five coatings of BM 17. Every coating should be<br />
applied by using a different polishing method, e.g.: from above<br />
to the bottom, from the left to the right, rotary. After the mould<br />
release agent has been aired for several hours (over night is the<br />
best), the material should be polished again intensively.<br />
Release Agents<br />
Article: HP-G<br />
Priming Wax<br />
Price<br />
€/piece<br />
500ml<br />
Basic price/ltr.<br />
1000ml<br />
Basic price/ltr.<br />
5000ml<br />
Basic price/ltr.<br />
incl. VAT<br />
net<br />
9,98 8,39<br />
19,96 16,78<br />
14,90 12,52<br />
14,90 12,52<br />
46,29 38,90<br />
9,26 7,78<br />
Thermal Stability: up to 100°C<br />
Consumption: approx. 30ml/m² (depending on the surface)<br />
Characteristics and Application:<br />
• Silicon release agent<br />
• Coating for PVA release agents in GRP moulds<br />
• Do not polish, otherwise the coating wax film will be destroyed!<br />
The surface will be mat after the drying period.<br />
Article: HP-PVA<br />
Film Release Agent<br />
Thermal Stability: until 100°C<br />
Consumption: approx. 60ml/m² (depending on the surface)<br />
Price<br />
€/piece<br />
200ml<br />
Basic price/ltr.<br />
500ml<br />
Basic price/ltr.<br />
1000ml<br />
Basic price/ltr.<br />
5000ml<br />
Basic price/ltr.<br />
incl. VAT net<br />
6,50 5,46<br />
32,50 27,31<br />
9,79 8,23<br />
19,58 16,46<br />
15,90 13,36<br />
15,90 13,36<br />
45,10 37,90<br />
9,<strong>02</strong> 7,58<br />
Characteristics and Application:<br />
• Watery-alcoholic lotion of polyvenyalcohol<br />
• Forms coatings similar to foils<br />
• High selectivity can be used for non-priming surfaces<br />
• Drying time 5-10min<br />
At first, please prime the ground with a coating of wax. After that, the PVA-<br />
Film Release Agent should be applied with a film release-sponge or a soft<br />
brush.<br />
In order to achieve an even surface, the coating has to be carried out evenly<br />
and free from any streaks. By using a colouring, the evenly coating can<br />
be controlled well. After approx. 5-10 minutes the film release forms a dry<br />
and glossy film.<br />
172<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Mould Release Agents<br />
Article: HP-CX7<br />
Carnauba Wax<br />
Thermal Stability: until 100°C<br />
Consumption: approx. 15-20g/m² (depending on the surface)<br />
Price<br />
€/can<br />
1 can of 425g<br />
Basic price/ltr.<br />
5 cans of 425g<br />
Basic price/ltr.<br />
10 cans of 425g<br />
Basic price/ltr.<br />
incl. VAT net<br />
16,90 14,20<br />
39,76 33,41<br />
14,90 12,52<br />
35,06 29,46<br />
13,69 11,50<br />
32,21 27,06<br />
Characteristics and Application:<br />
HP-CX7 Carnauba wax based Release Agent for high gloss finished<br />
surfaces.<br />
• Wax release agent for brilliant high gloss finish in moulds with<br />
smooth, non porous surfaces<br />
• Suitable for most composites mould applications with solvent free<br />
epoxy and polyester resins<br />
• Primer for Film Release Agent HP-PVA<br />
• High-gloss Release Agent for working with In-Mould Coating HP-IMC<br />
(HP-Textiles)<br />
Article: HP-HGR5<br />
High-Gloss Relase Agent<br />
Thermal Stability: until 150°C<br />
Consumption: approx. 20-25g/m² (depending on the surface)<br />
Price<br />
€/piece<br />
100ml<br />
Basic price/ltr.<br />
250ml<br />
Basic price/ltr.<br />
500ml<br />
Basic price/ltr.<br />
1000ml<br />
Basic price/ltr.<br />
5000ml<br />
Basic price/ltr.<br />
incl. VAT net<br />
4,90 4,12<br />
49,00 41,20<br />
10,90 9,16<br />
43,60 36,64<br />
18,90 15,88<br />
37,80 31,76<br />
31,90 26,81<br />
31,90 26,81<br />
139,00 116,81<br />
27,80 23,36<br />
Characteristics and Application:<br />
• Water based release agent for applications with In-Mould Coatings<br />
(HP-IMC) from HP-Textiles and also suitable for solvent free epoxy resins,<br />
unsaturated polyester resin and vinylester resins<br />
• Fast drying time (per layer
Cleanser / Thinner<br />
Article: HP-AC<br />
Acetone<br />
Boiling Point: 56°C<br />
Melting Point: -95°C<br />
Price<br />
€/piece<br />
1 Ltr. Can<br />
Basic price/ltr.<br />
5 Ltr. Can<br />
Basic price/ltr.<br />
10 Ltr. Can<br />
Basic price/ltr.<br />
incl. VAT net<br />
6,90 5,80<br />
6,90 5,80<br />
22,90 19,24<br />
4,58 3,85<br />
39,90 33,53<br />
3,99 3,53<br />
Description and Application:<br />
Acetone is an uncoloured, aromatic smelling fluid. It<br />
is completely mixable with water. The substance is<br />
very volatile.<br />
Aceton is used as a solvent in colours, varnish and as<br />
a chemical intermediate. Aceton is able to claen Paintbrushes,<br />
laminate rollers, ventilation rollers and other<br />
tools from non-cured polyester and epoxy resin.<br />
Cleanser / Thinner<br />
Article: HP-XB<br />
XB-Thinner<br />
Price<br />
€/piece<br />
1 Ltr. Can<br />
Basic price/ltr.<br />
5 Ltr. Can<br />
Basic price/ltr.<br />
10 Ltr. Can<br />
Basic price/ltr.<br />
incl. VAT<br />
net<br />
6,90 5,80<br />
6,90 5,80<br />
18,90 15,88<br />
3,78 3,18<br />
32,90 27,65<br />
3,29 2,76<br />
Degreasing agent for cleaning applications /<br />
passive thinning agent for EP-Systems<br />
Description and Application:<br />
The XB-Thinner can be filled in the ready mixed epoxy<br />
resin system untill the desired consistence is achieved.<br />
Low viscosity resin systems can be made sprayable<br />
with the addition of XB-Thinner.<br />
• Spraythinner for coating systems<br />
• Thinner for EP-undercoat<br />
• Mould cleaner<br />
• Degreasing agent for cleaning applications<br />
• Paint brush- and equipment cleaner<br />
Article: HP-IMC-X<br />
Thinner for PU<br />
Price<br />
€/piece<br />
0,5 Ltr. Can<br />
Basic price/ltr.<br />
1 Ltr. Can<br />
Basic price/ltr.<br />
5 Ltr. Can<br />
Basic price/ltr.<br />
incl. VAT<br />
net<br />
5,95 5,00<br />
11,90 10,00<br />
6,90 5,80<br />
6,90 5,80<br />
18,90 15,88<br />
3,78 3,18<br />
HP-IMC-X is a thinner on the basis of xylene made<br />
for our In-Mould-Coatings and our 2K PUR Topcoats,<br />
and other polyurethane coatings.<br />
Description and Application:<br />
The thinner is used to achieve the ideal consistency in<br />
the blended PU given system.<br />
Dosage max. 5% (by weight)<br />
174<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: BM-RV23<br />
Reactive diluent for epoxy resins<br />
The reactive thinner RV23 is a low viscous, difunctional<br />
additive for epoxy resin systems.<br />
Price<br />
€/piece<br />
1 Ltr.<br />
Basic price/ltr.<br />
5 Ltr.<br />
Basic price/ltr.<br />
incl. VAT net<br />
19,90 16,72<br />
19,90 16,72<br />
59,90 50,34<br />
11,98 10,07<br />
Characteristics and application:<br />
• Excellent thinning of epoxy resins<br />
• Difunctional<br />
• Solvent free<br />
• Less brittleness<br />
Consider RV23 in the calculation of the hardener quantity!<br />
Dosage up to 20 %<br />
For a lower brittleness, we recommend adding 5 %<br />
Overdose leads to losses of heat resistance and tensile strength<br />
Article: BW-HWP-250<br />
Handwash paste, 250 ml<br />
Price<br />
€/piece<br />
from 1 piece<br />
incl. VAT<br />
net<br />
5,19 4,36<br />
250 ml handwash paste for hands and skin. Special<br />
formula with high dissolving power to oils, coatings and<br />
resins. Fields of applications: hobbies, household and<br />
job. Easy handling: light pressure.<br />
• Dermatologically tested<br />
• pleasant, fruity odour<br />
• Very economical due to its ingredients.<br />
Cleanser / Thinner<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 175
OVERVIEW FILLERS<br />
Please consult the following diagram as a support to choose the right fillers.<br />
FIELDS OF APPLICATION<br />
site<br />
Products<br />
… thicken /<br />
thixotroping<br />
… anti setting …backfilling …coupling layer … bonding,<br />
adhesion<br />
178<br />
HP-Th23<br />
Thixotroping Agent,<br />
minerally based<br />
+ - ++ - -<br />
178<br />
HP-PK22<br />
Thixotroping Agent,<br />
pyrogenic silica<br />
++ ++<br />
C C C<br />
Fillers / Additives<br />
179<br />
179<br />
180<br />
HP-MB2<br />
Microballoons<br />
HP-BF1<br />
Cotton Flocks<br />
HP-GS3, HP-GS6<br />
Chopped Glass Fibre<br />
- - ++ - -<br />
C<br />
- ++ ++ ++<br />
- - ++ ++ ++<br />
180<br />
BM-AL<br />
Aluminium Powder<br />
+ - ++ - -<br />
181<br />
BM-QS<br />
Quartz Sand<br />
+ - ++ - -<br />
++ = very good applicable + = applicable o = conditionally applicable - = not provided<br />
Recipe for leveling compounds:<br />
HP-E45KL (resin) : 50g<br />
+ (hardener) : 30g<br />
+ HP-PK22 (thixotropypowder) : 2g<br />
+ HP-GS3/6 (chopped Glass Fibres) : 10g for coarse filler<br />
HP-MB2 (microballoons) : 20g (alternatively for light / fine filler)<br />
+ HP-PK22 (possibly add more)<br />
= ca. 90-100g<br />
176<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
DOSAGE BULK WEIGHT FEATURES /BENEFITS<br />
…rough putty<br />
… fine- / lightweight<br />
putty<br />
By weight<br />
(approx.)<br />
%<br />
approx.<br />
g/l<br />
C - till 15 190 - 200<br />
Hygroskopic<br />
Do not apply to direct water contact.<br />
C C 0,5 - 5<br />
40<br />
Hydrophobic = does not absorb water.<br />
Density: 2,2g/cm³; BET-surface: 200m²/g<br />
Dosage depends on the viscosity and temperature.<br />
C ++ till 30 140 - 150<br />
++ C till 30<br />
70 - 90<br />
++ - till 10 350 - 400<br />
Spezific weight 0,26g/cm³<br />
max. particle size: 200µm<br />
Melting point: > 1200°C<br />
Particle size distribution (d50): 50µm<br />
Fibre length: 200 - 400µm<br />
Fibre thickness: 10 - 20 µm<br />
Fibre length: 3 and 6mm<br />
Fibre thickness: 10 - 20 µm<br />
Fillers / Additives<br />
- - till 50<br />
1400<br />
Density: approx. 2,7g/ml<br />
Bulk weight:approx. 1400g/l<br />
Particle Size: < 100µm<br />
Purity: > 99%<br />
- - as required 1500<br />
Density: approx. 2,7g/ml<br />
Bulk weight: approx. 1400g/l<br />
Particle Size: < 100µm<br />
Purity: > 99%<br />
C = in combination with + or ++ Rev. 3.2<br />
Recipe for adhesives:<br />
HP-E45KL (resin) : 50g<br />
+ (hardener) : 30g<br />
+ HP-PK22 (thixotropypowder) : 2g<br />
+ HP-BF1 (cotton flocks) : 20g<br />
+ HP-PK22 (possibly add more)<br />
= ca. 100g<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 177
Thixotropypowder<br />
Filler for Synthetic Resin System to increase the viscosity of the sytem.<br />
Article: HP-TH23<br />
Thixotropypowder<br />
Price<br />
€/piece<br />
200g<br />
Basic price/kg<br />
incl. VAT net Delivery in<br />
4,30 3,61 Plastic bucket<br />
21,50 18,05<br />
Dosage: until 15%<br />
Suitable for: epoxy and polyester resin<br />
Bulk weight: 190 - 200g/l<br />
500g<br />
Basic price/kg<br />
9,30 7,82<br />
18,60 15,64<br />
Plastic bucket<br />
Characteristics and application:<br />
1kg<br />
Basic price/kg<br />
2kg<br />
Basic price/kg<br />
6kg<br />
Basic price/kg<br />
13,95 11,72<br />
13,95 11,72<br />
24,90 20,92<br />
12,45 10,46<br />
60,90 51,18<br />
10,15 8,53<br />
Plastic bucket<br />
Plastic bucket<br />
Plastic bucket<br />
Filler to produce Gelcoats/Topcoats. Prevents the run down<br />
on downward surfaces. The result is an impact-resistant and<br />
an outstanding UV-resistant surface.<br />
Thixotropypowder HP-TH23 can be stirred intensively in the<br />
mixed synthetic resin system until the desired consistence<br />
has been achieved.<br />
Fillers / Additives<br />
HP-PK22 is applied as a thickening and thixotropic agent in many organic systems.<br />
Article: HP-PK22<br />
Thixotropypowder<br />
Price<br />
€/piece<br />
incl. VAT net Delivery in<br />
1 ltr 4,64 3,90 Plastic bucket<br />
Basic price/ltr.<br />
2,5 ltr 8,91 7,49 Plastic bucket<br />
Basic price/ltr.<br />
5 ltr 12,50 10,50 Plastic bucket<br />
Basic price/ltr.<br />
10 ltr 20,82 17,50 Plastic bucket<br />
Basic price/ltr.<br />
30 ltr 46,41 39,00 Plastic bucket<br />
Basic price/ltr.<br />
10 kg 148,75 125,00 Paper bag<br />
Basic price/ltr.<br />
4,64 3,90<br />
3,56 2,99<br />
2,50 2,10<br />
2,08 1,75<br />
1,55 1,30<br />
0,595 0,50<br />
Dosage: 0,5 - 5%<br />
Suitable for: epoxy and polyester resin<br />
Density at 20°C: approx. 2,2g/cm³<br />
Tamped density: approx. 40g/ltr.<br />
Characteristics and application:<br />
HP-PK22 is applied as a thickening and thixotropic agent in<br />
many organic systems, e.g. in unsaturated polyesters resins,<br />
coatings, adhesives cosmetics and others.<br />
Thixotropypowder HP-PK22 can be stirred intensively in the mixed<br />
synthetic resin system until the desired consistence has<br />
been achieved.<br />
Amorphous pyrogenic silica.<br />
White colloidal powder of high purity.<br />
178<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Microballoons<br />
Microballoons < 0,2 mm (filler for synthetic resin systems).<br />
Article: HP-MB2<br />
Microballoons<br />
Price<br />
€/piece<br />
100g<br />
Basic price/kg<br />
250g<br />
Basic price/kg<br />
500g<br />
Basic price/kg<br />
incl. VAT net Delivery in<br />
3,90 3,28 Plastic bucket<br />
39,00 32,80<br />
6,50 5,46 Plastic bucket<br />
26,00 21,84<br />
9,30 7,82 Plastic bucket<br />
18,60 15,64<br />
Dosage: until 30%<br />
Suitable for:<br />
epoxy and polyester resin<br />
Bulk weight:<br />
140 - 150g/l<br />
Specific density:<br />
0,26 g/cm³<br />
Particle size distribution: 50 µm<br />
Max. particle Sizing: 200 µm<br />
Melting point: > 1200°C<br />
1kg 14,90 12,52<br />
Basic price/kg 14,90 12,52<br />
2kg 25,90 21,76<br />
Basic price/kg 12,95 10,88<br />
5kg 49,90 41,93<br />
Basic price/kg 9,98 8,39<br />
10kg 89,90 75,55<br />
Basic price/kg 8,99 7,56<br />
Cotton Flocks<br />
Filler for synthetic resin system.<br />
Plastic bucket<br />
Plastic bucket<br />
Plastic bucket<br />
Bag<br />
Characteristics and application:<br />
Microballoons are white, very fine and light glass hollow<br />
balls for epoxy and polyester resin systems.<br />
By mixing them into the system, a compression proof and simple<br />
grindable filler paste be produced. Add-on till 30 % in relation<br />
of the desired consistence and strength.<br />
• production of compression proof mould compounds<br />
• production of light filler paste compounds<br />
Fillers / Additives<br />
Article: HP-BF1<br />
Cotton Flocks<br />
Price<br />
€/piece<br />
100g<br />
Basic price/kg<br />
250g<br />
Basic price/kg<br />
incl. VAT net Delivery in<br />
2,90 2,44 Plastic bucket<br />
29,00 24,00<br />
5,90 4,96 Plastic bucket<br />
23,60 19,84<br />
Dosage: until 30%<br />
Suitable for:<br />
epoxy and polyester resin<br />
Bulk weight:<br />
70 - 90g/l<br />
Fibre length: 200 - 400µm<br />
Fibre thickness: 10 - 20µm<br />
500g<br />
Basic price/kg<br />
1kg<br />
Basic price/kg<br />
2kg<br />
Basic price/kg.<br />
6kg<br />
Basic price/kg<br />
8,50 7,14<br />
17,00 14,28<br />
13,90 11,68<br />
13,90 11,68<br />
19,90 16,72<br />
9,95 8,36<br />
36,90 31,01<br />
6,15 5,17<br />
Plastic bucket<br />
Plastic bucket<br />
Plastic bucket<br />
Plastic bucket<br />
Characteristics and application:<br />
Cotton flocks are used as a filler to thicken epoxy resins<br />
or to promote adhesion between laminate layers. It offers<br />
dimensional stability and it enhances the compounds<br />
strength. It is also used for patching and repairing surfaces.<br />
They can be used in combination with chopped glass fibres.<br />
Mixtures with cotton flocks have an increased impact strength<br />
as well as improved tensile, compressive and bending strength.<br />
The molded materials are sanded and lightweight.<br />
20kg<br />
Basic price/kg<br />
107,10 90,00<br />
5,35 4,50<br />
Bag<br />
Mould parts, design of models, sailplanes, automobil building,<br />
sandwich building, bonding and for boat building etc.<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 179
Chopped Glass Fibre<br />
Chopped glass fibre 6mm (chopped E-Glass fibre with silane).<br />
Article: HP-GS3<br />
Chopped Glass Fibre<br />
3mm<br />
Article: HP-GS6<br />
Chopped Glass Fibre<br />
Price<br />
€/piece<br />
100g<br />
Basic price/kg<br />
6mm<br />
incl. VAT net Delivery in<br />
2,30 1,93<br />
23,00 19,30<br />
Minigrip bag<br />
Dosage: until 30%<br />
Suitable for: epoxy and polyester resin<br />
Bulk weight: 350 - 400g/l<br />
Fibre length: 6mm / 3mm<br />
250g<br />
Basic price/kg<br />
3,90 3,28<br />
15,60 13,12<br />
Plastic bucket<br />
Fillers / Additives<br />
500g<br />
Basic price/kg<br />
1kg<br />
Basic price/kg<br />
2,5kg<br />
Basic price/kg<br />
5kg<br />
Basic price/kg<br />
10kg<br />
Basic price/kg<br />
20kg<br />
Basic price/kg<br />
5,30 4,45<br />
10,60 8,90<br />
7,60 6,39<br />
7,60 6,39<br />
14,90 12,52<br />
5,96 5,01<br />
22,90 19,24<br />
4,58 3,85<br />
37,90 31,85<br />
3,79 3,19<br />
59,90 50,34<br />
3,00 2,52<br />
Plastic bucket<br />
Plastic bucket<br />
Plastic bucket<br />
Plastic bucket<br />
Plastic bucket<br />
Bag<br />
Characteristics and application:<br />
Used to add in polyester and epoxy resin, to increase the<br />
strength of the mould parts and the mixture is still able to flow.<br />
Chopped glass fibre can be added with ot without cotton flocks.<br />
Resins that are reinforced with chopped glass fibres have a<br />
high tensile-, bending and pressure strength.<br />
Fibre masses and press masses, plastics, glue, corrosion protector<br />
coating and asbest alternative.<br />
Aluminium powder<br />
Powdery, metallic filler based on pure aluminium for increased compressing<br />
strengths of resin systems.<br />
Article: BM-AL<br />
Aluminium powder<br />
Price<br />
€/piece<br />
200g<br />
Basic price/kg<br />
500g<br />
Basic price/kg<br />
incl. VAT net Delivery in<br />
Minigrip bag<br />
Minigrip bag<br />
1 kg 13,95 11,72 Minigrip bag<br />
Basic price/kg<br />
5,95 5,00<br />
29,75 25,00<br />
9,95 8,36<br />
19,90 16,72<br />
13,95 11,72<br />
Dosage: until 50%<br />
Suitable for:<br />
epoxy and polyester resin<br />
Density:<br />
approx. 2,7g/ml<br />
Bulk weight:<br />
approx. 1400g/l<br />
Particle Size: < 100µm<br />
Purity: > 99%<br />
Characteristics and application:<br />
Add aluminium powder as third part into the ready-mixed<br />
resin system mixture until the desired consistency<br />
is reached.<br />
• prevents running off on sloping surfaces<br />
• making of modelling boards<br />
• increases the compressing strength<br />
180<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Quartz Sand<br />
Quartz sand as filler for resin systems or spreading material. Grain<br />
size 0 - 1 mm or 1 - 2 mm.<br />
Article: BM-QS<br />
Quartz Sand<br />
Price<br />
€/piece<br />
incl. VAT net Delivery in<br />
1 kg 2,99 2,51 Minigrip bag<br />
Basic price/kg<br />
2,99 2,51<br />
Dosage:<br />
Suitable for:<br />
Density:<br />
Bulk weight:<br />
Particle Size:<br />
as required<br />
epoxy and polyester resin<br />
approx. 2,7g/ml<br />
approx. 1500g/l<br />
0 - 1 mm / 1 - 2 mm<br />
5 kg 12,45 10,46 Plastic bucket<br />
Basic price/kg<br />
10 kg<br />
2,49<br />
21,90<br />
2,09<br />
18,40 Plastic bucket<br />
Basic price/kg 2,19 1,84<br />
Characteristics and application:<br />
• For polymeric mortar<br />
• Spreading of surfaces<br />
• For imitating mineral substrates<br />
Add quartz sand as third component in the ready mixed mixture until<br />
the desired consistency is reached. Usable on the sticky surface<br />
as spreading material.<br />
Fillers / Additives<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 181
OVERVIEW ADDITIVES<br />
Liquid additives to adjust properties of resins and paints.<br />
increase in volume of approx. 200% to<br />
300% with our HP-BEL11<br />
HP-BEL11: Liquid foaming agent<br />
• For foamimg of epoxy resins and to build foam laminates or in combination with sandwich materials<br />
(such as paddles or other components).<br />
HP-BEL31: Liquid thixotroping agent<br />
Fillers / Additives<br />
• Prevents settling / sagging of resin formulations.<br />
Main usage in covering systems (paints, topcoats,…).<br />
For high thixotroping applications like pitties, we recommend HP-PK22.<br />
HP-BEL51: Degassing additive<br />
• Used to add, in order to support the vent and degassing of gelcoats<br />
HP-BEL71: Levelling additive<br />
• Improve levelling properties (such as gel- or topcoats), reduces “fish-eyes” and other surface effects.<br />
Primarily used in covering systems, like topcoats.<br />
HP-BEL81: Matting Agent<br />
• Liquid additive for matting of resin systems on epoxy resin bases. Prevents gloss and reflections and<br />
enhanced slip resistant. For small applications in terrarium or aquarium constructions.<br />
HP-BEL91: Light Stabilizer / Anti-Yellowing Additive<br />
• Low-viscosity, UV-absorber for high quality surface-applications, (carbon-design, wooden coatings,<br />
casting).<br />
Usable in epoxy-systems and PUR-paints from HP-Textiles.<br />
182<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
OVERVIEW ADDITIVES<br />
HP-BEL11 HP-BEL51 HP-BEL71 HP-BEl91<br />
Suitable for<br />
Dosage<br />
(based on total formulation)<br />
weight<br />
%<br />
EP EP, UP EP,UP,PUR EP, UP, PUR EP, UP, PUR<br />
0,5 - 4 1 0,2 - 2 1 0,2 - 0,8 1 0,5 - 1,5 1 0,2 - 4 1<br />
Add-on<br />
resin no recomm. 2 recomm. possible possible<br />
mixture recomm. no possible recomm. recomm.<br />
Density (at 20°C)<br />
Active ingredient based on<br />
g/cm³<br />
0,98 - 1,<strong>02</strong> 1,14 - 1,18 0,79 - 0,83 0,93 - 0,97 0,94 - 0,98<br />
active foaming<br />
agent<br />
carbonyl<br />
diamides<br />
polysiloxanes<br />
polyacrylic<br />
acids<br />
amines<br />
Opaque?<br />
not specified<br />
Overdosing may cause to less<br />
transparency.<br />
no opacity<br />
*Please note:<br />
1 The mentioned amounts are standard values. Additives or combination among themselves may cause a less transparent resin. The exact<br />
values should be determined by tests beforehand.<br />
2 The thixotropy will generate after a medium reaction time. That is why we recommend predispensing into resin component.<br />
Article: HP-BEL11 Article: HP-BEL31<br />
Foaming Agent<br />
Thickening Agent<br />
Price<br />
€/piece<br />
20ml<br />
Basic price/100ml<br />
incl. VAT<br />
net<br />
3,95 3,32<br />
19,75 16,60<br />
Price<br />
€/piece<br />
20ml<br />
Basic price/100ml<br />
incl. VAT<br />
net<br />
3,95 3,32<br />
19,75 16,60<br />
Article: HP-BEL51<br />
System Degasser<br />
Price<br />
€/piece<br />
20ml<br />
Basic price/100ml<br />
incl. VAT<br />
net<br />
3,45 2,90<br />
17,25 14,50<br />
Fillers / Additives<br />
100ml<br />
Basic price/100ml<br />
8,29 6,97<br />
8,29 6,97<br />
100ml<br />
Basic price/100ml<br />
9,90 8,32<br />
9,90 8,32<br />
100ml<br />
Basic price/100ml<br />
6,95 5,84<br />
6,95 5,84<br />
500ml<br />
Basic price/100ml<br />
24,90 20,92<br />
4,98 4,18<br />
500ml<br />
Basic price/100ml<br />
29,90 25,13<br />
5,99 5,03<br />
500ml<br />
Basic price/100ml<br />
24,90 20,92<br />
4,97 4,18<br />
1000ml<br />
Basic price/100ml<br />
36,80 30,92<br />
3,68 3,09<br />
1000ml<br />
Basic price/100ml<br />
56,90 47,82<br />
5,69 4,78<br />
1000ml<br />
Basic price/100ml<br />
44,90 37,73<br />
4,49 3,77<br />
Article: HP-BEL71<br />
Levelling Additive<br />
Article: HP-BEL91<br />
Light Stabilizer<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
20ml<br />
Basic price/100ml<br />
3,95 3,32<br />
19,75 16,60<br />
20ml<br />
Basic price/100ml<br />
4,95 4,16<br />
24,75 20,80<br />
100ml<br />
Basic price/100ml<br />
9,90 8,32<br />
9,90 8,32<br />
100ml<br />
Basic price/100ml<br />
14,95 12,56<br />
14,95 12,56<br />
500ml<br />
Basic price/100ml<br />
29,90 25,13<br />
5,99 5,03<br />
500ml<br />
Basic price/100ml<br />
52,90 44,45<br />
10,58 8,89<br />
1000ml<br />
Basic price/100ml<br />
56,90 47,82<br />
5,69 4,78<br />
1000ml<br />
Basic price/100ml<br />
97,50 81,93<br />
9,75 8,19<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 183
DEGASSER ROLLER<br />
Degasser rollers are used for compressing and ventin the laminates.<br />
Paddle Roller<br />
Aluminium roller with screw fastening incl. holder and plastic grip.<br />
Suitable for:<br />
almost all resin systems and glass fabrics<br />
Article No.: roller-ø roller width incl. VAT net<br />
€ €<br />
HP-PR-20x75 20mm 75mm 9,50 7,98<br />
HP-PR-25x75 25mm 75mm 10,90 9,16<br />
HP-PR-25x150 25mm 150mm 16,90 14,20<br />
HP-PR-30x100 30mm 100mm 19,90 16,72<br />
Characteristics and application:<br />
• High resistance to almost all cleansers<br />
• The aluminium roller can be cleaned by burning off cured resin so that the life time will be even longer<br />
• Ergonomical formed plastic grip with adapter for an extension<br />
Tools / Accessories<br />
Radius Roller<br />
Aluminium roller with screw fastening incl. holder and plastic grip.<br />
Suitable for: almost all resin systems and glass fabrics<br />
Article No.: roller-ø roller width incl. VAT<br />
€<br />
net<br />
€<br />
HP-RR-13x75 13mm 75mm 9,90 8,32<br />
HP-RR-25x75 25mm 75mm 10,90 9,16<br />
HP-RR-25x150 25mm 150mm 15,90 13,36<br />
HP-RR-50x75 50mm 75mm 17,90 15,04<br />
HP-RR-50x150 50mm 150mm 23,90 20,08<br />
Characteristics and application:<br />
• High resistance to almost all cleansers<br />
• The aluminium roller can be cleaned burning off cured resin so that the life time will be even longer<br />
• Ergonomical formed plastic grip with adapter for an extension<br />
Spiral Bristle Roller<br />
Bristle roller with screw fastening incl. holder and grip<br />
Suitable for:<br />
uneven surfaces and thin glass fabrics<br />
Article No.: roller-ø roller width incl. VAT net<br />
€ €<br />
HP-SBR-30x50 30mm 50mm 9,90 8,32<br />
HP-SBR-30x75 30mm 75mm 10,90 9,16<br />
HP-SBR-30x100 30mm 100mm 14,90 12,52<br />
HP-SBR-30x150 30mm 130mm 19,90 16,72<br />
Characteristics and application:<br />
• Ergonomical formed plastic grip with an adapter for an extension<br />
• A quick change of the roller is possible with the plug fixing of the holder<br />
• Difficult to clean due to its bristles<br />
184<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Nobby Roller<br />
Aluminium roller with screw fastening incl. holder and plastic grip.<br />
Suitable for:<br />
thick matts and fabrics<br />
Article No.: roller-ø roller width incl. VAT net<br />
€ €<br />
HP-NR-25x75 25mm 75mm 14,90 12,52<br />
HP-NR-25x100 25mm 100mm 16,90 14,20<br />
HP-NR-25x150 25mm 150mm 19,90 16,72<br />
HP-NR-25x200 25mm 200mm 24,90 20,92<br />
Characteristics and application:<br />
• High resistance to almost all cleansers<br />
• The aluminium roller can be cleaned by burning off cured resin thus the life time will be even longer<br />
• Ergonomical formed plastic grip with adapter for an extension<br />
Radius Roller<br />
Aluminium roller with screw fastening incl. holder and plastic grip.<br />
Suitable for: curved and round surfaces<br />
Article No.: roller-ø roller width incl. VAT net<br />
€ €<br />
HP-DR-13x50 13mm 50mm 11,90 10,00<br />
HP-DR-25x75 25mm 75mm 16,90 14,20<br />
Characteristics and application:<br />
• High resistance to almost all cleansers<br />
• The aluminium roller can be cleaned by burning off cured resin thus<br />
the life time will be extended<br />
Corner Roller<br />
Aluminium roller with screw fastening incl. holder and plastic grip.<br />
Suitable for:<br />
rough and edges<br />
Tools / Accessories<br />
Article No.: roller-ø roller width incl. VAT net<br />
€ €<br />
HP-CR-50x15 50mm 15mm 11,90 10,00<br />
Characteristics and application:<br />
• High resistance to almost all cleansers<br />
• The aluminium roller can be cleaned by burning off cured resin and so<br />
the life time will be even longer<br />
• Ergonomical formed plastic grip with adapter for an extension<br />
Nobby Roller<br />
A clinched plasticroller for thick matts and fabrics.<br />
Suitable for:<br />
coatings of greater areas like ponds or swimming pools<br />
Article No.: roller-ø roller width incl. VAT net<br />
€ €<br />
HP-L1<strong>02</strong>1 68mm 24cm 9,99 8,39<br />
Characteristics and application:<br />
• High resistance to almost all cleansers<br />
• incl. holder and plastic grip with adpater for Telescopic-Extension Rod (HP-L1<strong>02</strong>4)<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 185
TOOLS / ACCESSORIES<br />
Article: HP-L300<br />
Roller Paint + Tray<br />
Article: HP-L1001<br />
10 pcs. Laminating Set<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
2,49 2,09<br />
2,24 1,88<br />
2,11 1,77<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
5,79 4,87<br />
5,21 4,38<br />
4,92 4,14<br />
Consisting of:<br />
• 1 Plastic Tray 300ml<br />
• 1 Stick-in handle 27cm<br />
• 1 Foam roller 10cm<br />
Consisting of:<br />
• 2 Foam roller 11cm • 1 Universal brush 10mm<br />
• 1 Stick-in handle 29cm • 1 Plastic stirr stick<br />
• 3 Flat brushes 25/35/50mm• 1 Plastic tray 300ml<br />
• 1 Round brush Gr. 2<br />
Article: HP-L10<strong>02</strong><br />
6 pcs. Brush Set with Pot<br />
Article: HP-L1003<br />
10 pcs. Brush Set<br />
Tools / Accessories<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
Article: HP-L1004<br />
10 pcs. Allroundset<br />
net<br />
3,79 3,18<br />
3,41 2,87<br />
3,22 2,71<br />
Consisting of:<br />
• 2 Round brushes Gr. 2 + 4<br />
• 3 Flat brushes 25/35/50mm<br />
• 1 Brush pot<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
net<br />
Consisting of:<br />
• 3 Flat brushes 20/25/35mm<br />
• 2 Round brushes Size 2 + 4<br />
• 3 Emaille paint brushes 0/1/2<br />
• 2 Corner brushes 25/35mm<br />
Article: HP-L51<br />
Plastic Resin Tray 50ml<br />
2,98 2,50<br />
2,68 2,25<br />
2,53 2,13<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
6,79 5,71<br />
6,11 5,14<br />
5,77 4,85<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,49 0,41<br />
0,44 0,37<br />
0,42 0,35<br />
Consisting of:<br />
• 2 Foam rollers 5 + 11cm • 1 Covering film<br />
• 2 Stick-in handles15 +29cm 4 x 2,5m<br />
• 3 Flat brushes 25/35/50mm<br />
• 1 Plastic tray 300ml<br />
Consisting of:<br />
• Plastic tray 50ml<br />
• Size:<br />
Inside: 9 x 21cm<br />
Outside: 10 x 22cm<br />
Article: HP-L301<br />
Plastic Resin Tray 300ml<br />
Article: HP-L601<br />
Plastic Resin Tray 600ml<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,99 0,83<br />
0,89 0,75<br />
0,84 0,71<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
1,99 1,67<br />
1,79 1,50<br />
1,69 1,42<br />
186<br />
Consisting of:<br />
• Plastic tray 300ml<br />
• Size:<br />
Inside: 14 x 28cm<br />
Outside: 15 x 31cm<br />
Consisting of:<br />
• Plastic tray 600ml<br />
• Size: 32 x 36cm<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: HP-L1101<br />
Flat brush light bristle 25mm<br />
Article: HP-L11<strong>02</strong><br />
Flat brush natural bristle 25mm<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,96 0,81<br />
0,92 0,77<br />
0,87 0,73<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,50 0,42<br />
0,47 0,40<br />
0,45 0,38<br />
Description:<br />
• Flat brush light bristle 25mm<br />
• Paints much more precise<br />
• Masking can often be avoided<br />
Description:<br />
• Flat brush natural bristle, 25mm<br />
• Paints much more precise<br />
• For epoxy resins, paints and<br />
varnishes<br />
Article: HP-L1110<br />
Flat brush natural bristle 35mm<br />
Article: HP-L1104<br />
Universal brush 14mm<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,64 0,54<br />
0,61 0,51<br />
0,58 0,49<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,65 0,55<br />
0,62 0,52<br />
0,59 0,49<br />
Description:<br />
• Flat brush natural bristle, 35mm<br />
• Paints much more precise<br />
• For epoxy resins, paints and<br />
varnishes<br />
Article: HP-L1105<br />
Universal brush 18mm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
net<br />
0,67 0,56<br />
0,64 0,53<br />
0,60 0,51<br />
Description:<br />
• Universal brush natural bristle, 14mm<br />
• For painting, spreading and dabing<br />
• Application of primer<br />
• Adhesive bridges, primers, etc.<br />
Article: HP-L1109<br />
Universal brush 20mm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
net<br />
0,70 0,59<br />
0,67 0,56<br />
0,63 0,53<br />
Tools / Accessories<br />
Description:<br />
• Universal brush natural bristle, 18mm<br />
• For painting, spreading and dabing<br />
• Application of primer<br />
• Adhesive bridges, primers, etc.<br />
Description:<br />
• Universal brush natural bristle, 20mm<br />
• For painting, spreading and dabing<br />
• Application of primer<br />
• Adhesive bridges, primers, etc.<br />
Article: HP-L1030<br />
Plug Bracket 6mm<br />
Article: HP-L1<strong>02</strong>3<br />
Paint roller handle 8mm<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
1,18 0,99<br />
1,06 0,89<br />
1,00 0,84<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
1,39 1,17<br />
1,25 1,05<br />
1,18 0,99<br />
Description:<br />
• for small roller 10 - 16mm<br />
Suitable with our: HP-L1010, HP-L1011, HP-L1066,<br />
HP-L1067, HP-L1017, HP-L1015, HP-L1018<br />
Description:<br />
• for rolls 18-25cm (HP-L1032 or HP-L1<strong>02</strong>2)<br />
• galvanized with plastic handle<br />
• Diameter: 8mm<br />
• suitable for telescope pole (HP-L1<strong>02</strong>4)<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 187
Article: HP-L1107<br />
Laminating Brush 15mm<br />
Article: HP-L1106<br />
Laminating Brush 10mm<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,78 0,66<br />
0,74 0,62<br />
0,70 0,59<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,72 0,60<br />
0,68 0,57<br />
0,65 0,54<br />
Description:<br />
• Precise trimming and perfect finish<br />
• Ideal for solvent-based paints, varnishes<br />
and epoxy resins<br />
• The curved shape makes it easy to<br />
reach hard to reach places<br />
Description:<br />
• Precise trimming and perfect finish<br />
• Ideal for solvent-based paints, varnishes<br />
and epoxy resins<br />
• The curved shape makes it easy to reach<br />
hard to reach places<br />
Tools / Accessories<br />
Article: HP-L1071<br />
Laminating Brush 2cm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
Article: HP-L1015<br />
Velours Roller 10cm<br />
incl. VAT<br />
net<br />
0,99 0,83<br />
0,94 0,79<br />
0,89 0,75<br />
Description:<br />
• Flat brush straight 20mm<br />
• Black China bristle<br />
• Length: approx. 34cm<br />
• Thickness: approx. 8mm<br />
net<br />
0,98 0,82<br />
0,88 0,74<br />
0,83 0,70<br />
Article: HP-L1067<br />
Velours Roller 5cm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
net<br />
0,62 0,52<br />
0,56 0,47<br />
0,53 0,44<br />
All rollers on this page are compatible with the HP-L1030 stirrup<br />
Description:<br />
• Width: 10cm<br />
• Pole height: 4mm<br />
• For very fine finishes<br />
Description:<br />
• Width: 5cm<br />
• Pole height: 4mm<br />
• For very fine finishes<br />
Article: HP-L1016<br />
Polyamide Roller 10cm<br />
Article: HP-L1017<br />
Polyamide Roller 15cm<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
1,79 1,50<br />
1,61 1,35<br />
1,52 1,28<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
2,19 1,84<br />
1,97 1,66<br />
1,86 1,56<br />
Description:<br />
• Polyamide roller 10cm<br />
• Particularly hard-wearing<br />
• Outer diameter 35mm<br />
Description:<br />
• Polyamide roller 15cm<br />
• Particularly hard-wearing<br />
• Outer diameter 35mm<br />
188<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: HP-L1010<br />
Foam Roller 5cm<br />
Article: HP-L1011<br />
Foam Roller 11cm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT net<br />
0,59 0,50<br />
0,53 0,45<br />
0,50 0,42<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT net<br />
0,79 0,66<br />
0,71 0,60<br />
0,67 0,56<br />
Description:<br />
• Replacement roll 5cm<br />
• Super fine structure<br />
• Outer diameter 35mm<br />
Description:<br />
• Replacement roll 11cm<br />
• Super fine structure<br />
• Outer diameter 35mm<br />
Article: HP-L1<strong>02</strong>6<br />
Polyamide Roller 25cm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
net<br />
Description:<br />
Includes stick-in handle with adaptor for telescopic<br />
extensions (HP-L1<strong>02</strong>4). Recommended for works<br />
in ponds and swimming pools. Suitable for epoxy<br />
and polyester resin.<br />
Article: HP-L1034<br />
Paint Roller 10cm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
5,99 5,03<br />
5,39 4,53<br />
5,09 4,28<br />
incl. VAT<br />
net<br />
2,19 1,84<br />
1,97 1,66<br />
1,86 1,56<br />
Description:<br />
• Width: 10cm<br />
• Flor height: 4mm<br />
• Lint-free and solvent-resistant!<br />
• For high-quality coatings with PU paints<br />
Article: HP-L1<strong>02</strong>2<br />
Replacement Roller 25cm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
Description:<br />
• Polyamide roll 25cm<br />
• Very durable<br />
• Suitable for HP-L1<strong>02</strong>6<br />
Article: HP-L1032<br />
Paint Roller 25cm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
net<br />
net<br />
4,99 4,19<br />
4,49 3,77<br />
4,24 3,56<br />
8,26 6,94<br />
7,43 6,25<br />
7,<strong>02</strong> 5,90<br />
Description:<br />
• Width: 25cm<br />
• Flor height: 4mm<br />
• Lint-free and solvent-resistant!<br />
• For high-quality coatings with PU paints<br />
All rollers on this page (except L1<strong>02</strong>2) are compatible with the HP-L1030 stirrup<br />
Tools / Accessories<br />
Article: HP-L1055<br />
Scissors, „easypro“ Stainless Steel<br />
Article: HP-L1054<br />
Scissors, Stainless Steel<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
5,90 4,96<br />
5,31 4,46<br />
5,<strong>02</strong> 4,22<br />
from 1 piece<br />
from 3 pieces<br />
from 5 pieces<br />
6,90 5,80<br />
6,21 5,22<br />
5,87 4,93<br />
Description:<br />
• Scissors “easypro“<br />
• stainless steel<br />
• Suitable to cut glass fabrics, carbon fabrics,<br />
mats, polyester non-woven absorber,<br />
(Not suitable for Aramid fabrics)<br />
• Length: 28cm<br />
Description:<br />
• Scissors “Optima“<br />
• stainless steel<br />
• Suitable to cut glass fabrics, carbon fabrics,<br />
mats, polyester non-woven absorber,<br />
(Not suitable for Aramid fabrics)<br />
• Length: 12“ / 29cm<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 189
Article: HP-L1103<br />
Spatula Set, 4 pcs. , plastic<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
net<br />
1,03 0,86<br />
0,97 0,82<br />
0,92 0,78<br />
Description:<br />
• Especially suitable to apply putty to grade or rounded<br />
surfaces<br />
• 4 different sizes (50, 75, 100 and 120 mm)<br />
• Flexible plastic, thin spatulas<br />
Article: HP-L1120<br />
Stirrer, 20cm, plastic<br />
Article: HP-L1128<br />
Stirrer, 28cm, plastic<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,83 0,70<br />
0,79 0,66<br />
0,75 0,63<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
0,95 0,80<br />
0,86 0,72<br />
0,76 0,64<br />
Tools / Accessories<br />
Description:<br />
These long plastic stirrer bars are ideal for mixing and stirring all resins, colours and wallpaper pastes. The holes<br />
in the stir bar allow a uniform distribution while stirring the liquid. In addition the stir bar is stably processed<br />
and convinces with a long shelf life.<br />
Article: HP-L1051<br />
Stirrer with Metal Propeller<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
Article: HP-L1052<br />
Stirrer with Metal Propeller<br />
net<br />
2,49 2,09<br />
2,24 1,88<br />
2,12 1,78<br />
Description:<br />
• For a max. mixing of approx. 15 kg.<br />
• Adapter for a drill machine<br />
• Easy cleaning with aceton<br />
• Measure: 85 x 400mm<br />
Article: HP-L1061<br />
Spatula / 1 pack = 100 pieces<br />
Price<br />
€/pack<br />
from 1 pack<br />
Basic price/cup<br />
from 3 pack<br />
Basic price/cup<br />
from 5 pack<br />
Basic price/cup<br />
incl. VAT<br />
Description:<br />
• Spatula / Wood spatula<br />
• Length: 180mm<br />
• Width: 18mm<br />
• 100 pieces / Pack<br />
net<br />
4,70 3,95<br />
0,047 0,039<br />
4,23 3,55<br />
0,042 0,035<br />
3,76 3,16<br />
0,038 0,032<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 3 pieces<br />
from 5 pieces<br />
incl. VAT<br />
net<br />
11,78 9,90<br />
11,20 9,41<br />
10,60 8,91<br />
Description:<br />
• For a max. mixing of approx. 25 kg.<br />
• Adapter for a drill machine, SW10<br />
• Easy cleaning with aceton<br />
• Measure: 103 x 600mm<br />
190<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: HP-L1063<br />
Mixing Cup 250ml / 1 pack = 100 pcs<br />
Article: HP-L1064<br />
Mixing Cup 500ml / 1 pack = 50 pcs<br />
Price<br />
€/pack<br />
incl. VAT<br />
net<br />
Price<br />
€/pack<br />
incl. VAT<br />
net<br />
from 1 pack<br />
Basic price/cup<br />
from 5 pack<br />
Basic price/cup<br />
8,95 7,52<br />
0,90 0,7<br />
7,16 6,<strong>02</strong><br />
0,72 0,06<br />
Description:<br />
• PP-nature, round<br />
• Suitable for EP and UP resin<br />
from 1 pack<br />
Basic price/cup<br />
from 5 pack<br />
Basic price/cup<br />
8,95 7,52<br />
0,18 0,15<br />
7,16 6,<strong>02</strong><br />
0,14 0,12<br />
from 10 pack<br />
Basic price/cup<br />
6,27 5,27<br />
0,06 0,05<br />
• Volume: 250ml or 500ml<br />
• 250ml = 100 pieces / pack<br />
• 500ml = 50 pieces / pack<br />
from 10 pack<br />
Basic price/cup<br />
6,27 5,27<br />
0,13 0,11<br />
Article: HP-L1042<br />
Plastic Bucket 1,2 ltr.<br />
Article: HP-L1044<br />
Plastic Bucket 2,6 ltr.<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
Article: HP-L1046<br />
Plastic Bucket 5,7 ltr.<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
1,13 0,95<br />
1,<strong>02</strong> 0,86<br />
0,90 0,76<br />
0,85 0,71<br />
incl. VAT<br />
net<br />
2,32 1,95<br />
2,09 1,76<br />
1,86 1,56<br />
1,74 1,46<br />
Description:<br />
• PP-nature, round<br />
• with plastic hanger / plastic lid<br />
• Suitable for EP and UP resin<br />
• Volume: 1,2 ltr., 2,6 ltr., 5,7ltr.<br />
and 10,8ltr.<br />
Ideal for mixing resins, paints<br />
and varnishes. (solvent-containing<br />
products should not be stored in this<br />
bucket!)<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
Article: HP-L1048<br />
Plastic Bucket 10,8 ltr.<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
1,96 1,65<br />
1,77 1,48<br />
1,57 1,32<br />
1,47 1,24<br />
incl. VAT<br />
net<br />
3,50 2,94<br />
3,15 2,65<br />
2,80 2,35<br />
2,62 2,20<br />
Tools / Accessories<br />
Article: HP-L1050<br />
Plastic Bucket 14 ltr. with measure<br />
Article: BM-1395<br />
Graduated Measuring<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
from 20 pieces<br />
4,90 4,12<br />
4,41 3,70<br />
4,17 3,50<br />
3,92 3,29<br />
100 ml<br />
250 ml<br />
500 ml<br />
1000 ml<br />
2,90 2,44<br />
3,80 3,19<br />
4,20 3,53<br />
4,90 3,12<br />
Description:<br />
• Suitable for epoxy and polyester<br />
resin<br />
• Very resistable material,<br />
reusable<br />
Description:<br />
Plastic measuring jug with spout for precise<br />
measuring by volume ratio.<br />
• Chemically stable<br />
• Food safe<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 191
Article: HP-L4001<br />
Adapter for 29g double syringe<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
incl. VAT<br />
net<br />
1,65 1,38<br />
1,49 1,25<br />
1,32 1,11<br />
1,16 0,98<br />
Description:<br />
Adapter for HP-E5K 29g double<br />
syringe. You need this adapter<br />
to connect the mixing tube (HP-<br />
L40<strong>02</strong>) on the double syringe.<br />
Article: HP-L40<strong>02</strong><br />
Mixing tube for 29g double syringe<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
incl. VAT<br />
net<br />
1,89 1,59<br />
1,70 1,43<br />
1,51 1,27<br />
1,32 1,11<br />
Note:<br />
Description:<br />
• Length: 85mm<br />
• Mixing tube with 13 stages and<br />
adjustable tip (Ø 1 - 4mm).<br />
After use, the epoxy resin cures in the mixing tube thus the multiple use of the<br />
mixing tube is not possible. After the application DO NOT twist the mixing tube;<br />
DO NOT change the mixing tube until reuse!<br />
Tools / Accessories<br />
Plastic Valve Article Quantity Resin Hardener<br />
Article-No.: Quantity Price<br />
incl VAT €<br />
Price<br />
net €<br />
HP-L1057 from 1 pcs. 3,99 3,35<br />
HP-L1059 from 1 pcs. 4,99 4,19<br />
HP-L1058 from 1 pcs. 4,99 4,19<br />
Please consult the following diagram<br />
as a support to choose the right valve:<br />
E80FS<br />
4kg - 12,8kg<br />
48kg<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1058<br />
E30FB 33kg -------- HP-L1057<br />
E25D,<br />
E25DM<br />
E40D<br />
E50GB<br />
E60K,<br />
E120K<br />
E25KL, E25L,<br />
E45KL, E45L,<br />
E45GA, E45GE, E45GB<br />
E28L, E29L,<br />
E55L, E56L,<br />
E110L, E111L<br />
Serie E3000RI<br />
Serie E3000GL<br />
E120WSM/WSI<br />
E300GB<br />
E45T, E45TM,<br />
E25TU, E25TMU<br />
4kg - 12,8kg<br />
48kg<br />
3kg<br />
7,5kg / 12kg<br />
37,5kg<br />
7,5kg - 15kg<br />
45kg<br />
4kg - 12,8kg<br />
48kg<br />
2,8kg<br />
7kg<br />
28kg<br />
42kg<br />
3,25kg<br />
10,4kg<br />
39kg<br />
3,15kg<br />
10,08kg<br />
37,8kg<br />
3,375kg<br />
8,1kg - 13,5kg<br />
27kg<br />
40,5kg<br />
4kg - 12,8kg<br />
48kg<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1057<br />
HP-L1058<br />
HP-L1058<br />
HP-L1057<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1057<br />
HP-L1058<br />
HP-L1058<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1058<br />
BM-1406<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1058<br />
HP-L1057<br />
HP-L1058<br />
BM-1406<br />
HP-L1057<br />
HP-L1057<br />
HP-L1059<br />
BM-1406<br />
HP-L1057<br />
HP-L1057<br />
BM-1406<br />
HP-L1057<br />
HP-L1057<br />
BM-1046<br />
HP-L1057<br />
HP-L1057<br />
HP-L1059<br />
HP-L1057<br />
HP-L1058<br />
R4GB, R12GB 5kg / 10kg / 20kg HP-L1057 HP-L1057<br />
A15GB 20kg HP-L1057 -----------<br />
192<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: HP-L7005<br />
Plastic Bottle 100 ml<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
incl. VAT<br />
net<br />
1,00 0,84<br />
0,95 0,80<br />
0,90 0,76<br />
0,80 0,67<br />
Description:<br />
• HDPE-nature<br />
• Incl. screw lid<br />
• Suitable for EP resin and<br />
solvent-free substances<br />
Volume: 100 / 250 / 500 / 1000 ml<br />
Article: HP-L7015<br />
Plastic Bottle 250 ml<br />
Article: HP-L7<strong>02</strong>5<br />
Plastic Bottle 500 ml<br />
Article: HP-L7035<br />
Plastic Bottle 1000 ml<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
1,07 0,90<br />
1,<strong>02</strong> 0,86<br />
0,96 0,81<br />
0,86 0,72<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
1,25 1,05<br />
1,19 1,00<br />
1,12 0,95<br />
1,00 0,84<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
1,43 1,20<br />
1,36 1,14<br />
1,29 1,08<br />
1,14 0,96<br />
Article: HP-L7040<br />
Jerrycan 2,5 ltr.<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Article: HP-L7050<br />
Jerrycan 5 ltr.<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Tools / Accessories<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
2,95 2,48<br />
2,65 2,23<br />
2,36 1,98<br />
2,21 1,86<br />
Description:<br />
• HDPE-nature<br />
• Incl. screw lid<br />
• Suitable for EP resin and<br />
solvent-free substances<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
3,57 3,00<br />
3,21 2,70<br />
2,86 2,40<br />
2,68 2,25<br />
Volume: 2,5 / 5 / 10 / 20 / 30 ltr.<br />
Article: HP-L7060<br />
Jerrycan 10 ltr.<br />
Article: HP-L7070<br />
Jerrycan 20 ltr.<br />
Article: HP-L7080<br />
Jerrycan 30 ltr.<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
Price<br />
€/piece<br />
incl. VAT<br />
net<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
5,56 4,68<br />
5,01 4,21<br />
4,45 3,74<br />
4,17 3,51<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
10,76 9,04<br />
9,68 8,14<br />
8,61 7,23<br />
8,07 6,78<br />
from 1 piece<br />
from 5 piece<br />
from 10 pieces<br />
from 25 pieces<br />
12,46 10,47<br />
11,22 9,42<br />
9,97 8,38<br />
9,35 7,85<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 193
Hand Files<br />
Article-No.: Description Quantity Price<br />
incl VAT €<br />
HP-F-101<br />
HP-F-1<strong>02</strong><br />
HP-R201C<br />
HP-R203C<br />
HP-R204C<br />
HP-S204F<br />
Flat File 230 x 38 x 1,5mm,<br />
Grain fine<br />
Flat File 230 x 38 x 1,6mm,<br />
Grain coarse<br />
Angle File 230 x 38 x25mm,<br />
approx. 75°, Grain coarse<br />
Round File 215 x 14mm<br />
Grain coarse<br />
Round File 230 x 7mm<br />
Grain coarse<br />
Square File 230 x 6,5mm<br />
Grain fine<br />
from 1 pcs.<br />
from 1 pcs.<br />
from 1 pcs.<br />
Price<br />
net €<br />
11,89 9,99<br />
12,89 10,83<br />
11,89 9,99<br />
Tools / Accessories<br />
Hand Files in a Set<br />
Article-No.: Description Quantity Price<br />
incl VAT €<br />
HP-SET-8C<br />
HP-SET-8F<br />
8 Files in a Set<br />
Grain coarse, in a tool roll<br />
(F1<strong>02</strong>, R1<strong>02</strong>, R200C, R201C,<br />
R2<strong>02</strong>C, R203C, R204C, S204C)<br />
8 Files in a Set<br />
Grain fine, in a tool roll<br />
(F101, R101, R200F, R201F,<br />
R2<strong>02</strong>F, R203F, R204F, S204F)<br />
from 1 pcs.<br />
Price<br />
net €<br />
84,85 71,30<br />
Needle Files -Large-<br />
Article-No.: Description Quantity Price<br />
incl VAT €<br />
HP-LNF-1<br />
HP-LNF-HA<br />
HP-LNF-RO<br />
HP-LNF-SQ<br />
HP-LNF-TR<br />
HP-LNF-HR<br />
HP-LNFH<br />
5 Needle Files -Large-<br />
Medium Grit<br />
Flat Needle File<br />
Lenght: 180mm, Shaft: 5mm<br />
Round Needle File<br />
Lenght: 180mm, Shaft: 5mm<br />
Square Needle File<br />
Lenght: 180mm, Shaft: 5mm<br />
Triangle Needle File<br />
Lenght: 180mm, Shaft: 5mm<br />
Half Round Needle File<br />
Lenght: 180mm, Shaft: 5mm<br />
Large File Handle<br />
from 1 pcs.<br />
from 1 pcs.<br />
from 1 pcs.<br />
Price<br />
net €<br />
49,98 42,00<br />
11,89 9,99<br />
4,95 4,16<br />
194<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Needle Files -Small-<br />
Article-No.: Description Quantity Price<br />
incl VAT €<br />
HP-NF-1H<br />
HP-NF-HA<br />
HP-NF-RO<br />
HP-NF-SQ<br />
HP-NF-TR<br />
HP-NF-HR<br />
5 Needle Files -smallwith<br />
easy grip handle<br />
Flat Needle File<br />
Lenght: 140mm, Shaft: 3mm<br />
Round Needle File<br />
Lenght: 140mm, Shaft: 3mm<br />
Square Needle File<br />
Lenght: 140mm, Shaft: 3mm<br />
Triangle Needle File<br />
Lenght: 140mm, Shaft: 3mm<br />
Half Round Needle File<br />
Lenght: 140mm, Shaft: 3mm<br />
from 1 pcs.<br />
from 1 pcs.<br />
Price<br />
net €<br />
39,98 33,59<br />
8,98 7,54<br />
Sanding Blocks<br />
Article-No.: Description Quantity Price<br />
incl VAT €<br />
HP-SB140<br />
HP-SB280<br />
Wedge Block 140 x 51mm<br />
one side with grain fine,<br />
other side with grain rough<br />
Wedge Block 280 x 51mm<br />
one side with grain fine,<br />
other side with grain rough<br />
from 1 pcs.<br />
from 1 pcs.<br />
Price<br />
net €<br />
23,69 19,90<br />
37,96 31,90<br />
HP-SB140<br />
HP-SB280<br />
Tools / Accessories<br />
HP-WB140<br />
Wedge Block 140 x 51mm<br />
one side with grain fine,<br />
other side with grain rough<br />
from 1 pcs.<br />
24,88 20,91<br />
HP-WB280<br />
Wedge Block with 45° angle<br />
ends, 280 x 51mm<br />
one side with grain fine,<br />
other side with grain rough<br />
from 1 pcs.<br />
38,90 32,69<br />
HP-WB140<br />
HP-WB280<br />
HP-CB140C<br />
Contour Block<br />
140 x 51mm<br />
internal & external grain<br />
coarse<br />
from 1 pcs.<br />
24,88 20,91<br />
HP-CB140F<br />
Contour Block<br />
140 x 51mm<br />
internal & external grain fine<br />
from 1 pcs.<br />
24,88 20,91 HP-CB140C,<br />
HP-CB140F<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 195
Small Rotaries<br />
Article-No.: Description Quantity Price<br />
incl VAT €<br />
HP-RF1C<br />
HP-RF2C<br />
HP-RF3C<br />
HP-RF4C<br />
HP-RF5C<br />
HP-RF6C<br />
HP-RF8C<br />
Narrow Cone Rotary<br />
Grain: 8mm coarse<br />
Wide Cone Rotary<br />
Grain: 16mm coarse<br />
Drum Rotary<br />
Grain: 11mm coarse<br />
Pancake Rotary<br />
Grain: 20mm coarse<br />
Domehead Rotary<br />
Grain: 7mm coarse<br />
Rod Rotary<br />
Grain: 4mm coarse<br />
Ball Rotary<br />
Grain: 9mm coarse<br />
from 1 pcs.<br />
Price<br />
net €<br />
14,98 12,59<br />
Rotary Kits<br />
Tools / Accessories<br />
Article-No.: Description Quantity Price<br />
incl VAT €<br />
HP-KT1<br />
HP-KT1F<br />
HP-KT5<br />
HP-KT5F<br />
7 Rotary Burrs -Coarsecontains:<br />
(RS1C, RF2C, RF3C, RF4C, RF5C,<br />
RF6C & RD2 Dics)<br />
7 Rotary Burrs -FINEcontains:<br />
(RS1C, RF2C, RF3C, RF4C, RF5C,<br />
RF6C & RD2 Dics) in fine<br />
5 Rotary Burrs -Coarsecontains:<br />
(RS1C, RF3C, RF4C, RF6C & RD2<br />
Dics)<br />
5 Rotary Burrs -FINEcontains:<br />
(RS1C, RF3C, RF4C, RF6C & RD2<br />
Dics) in fine<br />
from 1 pcs.<br />
from 1 pcs.<br />
Price<br />
net €<br />
94,99 79,82<br />
69,00 57,99<br />
Jigsaw Blades<br />
Article-No.: Description Quantity Price<br />
incl VAT €<br />
HP-JSB1<br />
HP-JSB4<br />
Bosch Jigsaw Blade<br />
Medium 7,6cm 3“<br />
Cuts in both directions,<br />
leaving a finer finish<br />
B&D Jigsaw Blade<br />
with hole 7cm<br />
Cuts in both directions,<br />
leaving a finer finish<br />
from 1 pcs.<br />
Price<br />
net €<br />
5,95 5,00<br />
196<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: HP-L1201<br />
Tooth scraper<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 3 pieces<br />
from 5 pieces<br />
incl. VAT<br />
net<br />
11,78 9,90<br />
11,20 9,41<br />
10,60 8,91<br />
Description:<br />
Tooth scraper for floor coatings with<br />
layer heights of approx. 0,6 - 1,0 mm<br />
• Tooth shape S1<br />
• Width of 280 mm<br />
• Standard steel<br />
Article: HP-L12<strong>02</strong><br />
Surface squeegee<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 3 pieces<br />
from 5 pieces<br />
incl. VAT<br />
net<br />
29,63 24,90<br />
28,16 23,66<br />
26,67 22,41<br />
Description:<br />
Surface squeegee for floor coatings<br />
with layer heights of approx. 0,6 - 1,0<br />
mm<br />
• Tooth shape S1<br />
• Width of 600 mm<br />
• Standard steel<br />
• Incl. handle holder<br />
Article: HP-L1203<br />
Tooth scraper<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 3 pieces<br />
from 5 pieces<br />
incl. VAT<br />
net<br />
11,78 9,90<br />
11,20 9,41<br />
10,60 8,91<br />
Description:<br />
Tooth scraper for floor coatings with<br />
layer heights of approx. 1,0 - 1,7 mm<br />
• Tooth shape S2<br />
• Width of 280 mm<br />
• Standard steel<br />
Tools / Accessories<br />
Article: HP-L1204<br />
Surface squeegee<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 3 pieces<br />
from 5 pieces<br />
incl. VAT<br />
net<br />
29,63 24,90<br />
28,16 23,66<br />
26,67 22,41<br />
Description:<br />
Surface squeegee for floor coatings<br />
with layer heights of approx. 1,0 - 1,7<br />
mm<br />
• Tooth shape S2<br />
• Width of 600 mm<br />
• Standard steel<br />
• Incl. handle holder<br />
Article: HP-L1205<br />
Tooth scraper<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 3 pieces<br />
from 5 pieces<br />
incl. VAT<br />
net<br />
11,78 9,90<br />
11,20 9,41<br />
10,60 8,91<br />
Description:<br />
Tooth scraper for floor coatings with<br />
layer heights of approx. 2,0 - 2,5 mm<br />
• Tooth shape S4<br />
• Width of 280 mm<br />
• Standard steel<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 197
Article: HP-L1206<br />
Surface squeegee<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 3 pieces<br />
from 5 pieces<br />
incl. VAT<br />
net<br />
29,63 24,90<br />
28,16 23,66<br />
26,67 22,41<br />
Description:<br />
Surface squeegee for floor coatings<br />
with layer heights of approx. 2,0 - 2,5<br />
mm<br />
• Tooth shape S4<br />
• Width of 600 mm<br />
• Standard steel<br />
• Incl. handle holder<br />
Article: HP-L1<strong>02</strong>4<br />
Telescope Extension 200cm<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT<br />
net<br />
9,99 8,39<br />
7,99 6,71<br />
5,99 5,03<br />
Description:<br />
• Aluminium telescope extension pole 200cm<br />
length<br />
• Good grip and adjustable till 200cm<br />
• Suitable for our HP-L1<strong>02</strong>1 and Polyamide<br />
Roller HP-L1<strong>02</strong>6<br />
• Recommended for a large coating area in<br />
pond and swimming pool construction.<br />
Tools / Accessories<br />
198<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Article: HP-L1053<br />
Nitril Gloves size 10<br />
Price<br />
€/piece<br />
from 1 piece<br />
from 5 pieces<br />
from 10 pieces<br />
incl. VAT net<br />
4,90 4,12<br />
4,41 3,71<br />
4,17 3,50<br />
Description:<br />
Partial coated on BW-Trikot, premium model with<br />
cotton lining.<br />
Permanent consistent.<br />
Colour: yellow Norm: EN 388 4121<br />
Disposable Nitril Gloves<br />
Description:<br />
• High resistance against chemicals<br />
• More resistant than vinyl and latex<br />
• Good comfort and easy to handle with<br />
• Also suitable for medicine, laboratory and food processing<br />
Aticle-No.: Size Quantity Price incl VAT<br />
per package €<br />
Price net<br />
per package €<br />
Basic price<br />
per piece €<br />
Basic price<br />
per piece € net<br />
HP-L1080 L / powder free 100 pcs. 23,74 19,95 0,24 0,20<br />
HP-L1081 L / powder free 20 pcs. 5,89 4,95 0,29 0,25<br />
HP-L1082 L / powder free 10 pcs. 4,17 3,50 0,42 0,35<br />
HP-L1085 XL / powder free 100 pcs. 23,74 19,95 0,24 0,20<br />
HP-L1086 XL / powder free 20 pcs. 5,89 4,95 0,29 0,25<br />
HP-L1087 XL / powder free 10 pcs. 4,17 3,50 0,42 0,35<br />
HP-L1090 L / with powder 100 pcs.<br />
23,74 19,95 0,24 0,20<br />
HP-L1091 L / with powder 20 pcs.<br />
5,89 4,95 0,29 0,25<br />
HP-L1092 L / with powder 10 pcs.<br />
4,17 3,50 0,42 0,35<br />
HP-L1095 XL / with powder 100 pcs.<br />
23,74 19,95 0,24 0,20<br />
HP-L1096 XL / with powder 20 pcs.<br />
5,89 4,95 0,29 0,25<br />
HP-L1097 XL / with powder 10 pcs.<br />
4,17 3,50 0,42 0,35<br />
Tools / Accessories<br />
Article: BW-HWP<br />
Handwash paste, 250 ml<br />
Price<br />
€/piece<br />
from 1 piece<br />
incl. VAT<br />
net<br />
5,19 4,36<br />
Description:<br />
250 ml handwash paste for hands and skin. Special<br />
formula with high dissolving power to oils, coatings and<br />
resins. Fields of applications: hobbies, household and<br />
job. Easy handling: light pressure.<br />
• Dermatologically tested<br />
• pleasant, fruity odour<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 199
Digital Table Scale<br />
Handy, practical table scale, ideal for the private sector. Dimension 180x140x18mm<br />
Article: HP-VZ3006<br />
Digital Table Scale, 5kg<br />
Price<br />
€/piece<br />
from 1 piece<br />
incl. VAT<br />
net<br />
13,90 11,68<br />
Technical Data:<br />
• Strain Gauge Precision Technology<br />
• Capacity: up to 5kg<br />
• Readability: 1g<br />
• Display Modes: g / oz<br />
• Auto/Manual Shut-Off<br />
• Powered by 2 x AAA Battery (included)<br />
Digital Table Scale<br />
Tools / Accessories<br />
This electronic scale is a multifunctional-table scale. It is planned for demanding personal user`s occasional employment<br />
but nevertheless based on the professional models` know-how and their technology. These points lead<br />
to the best possible price-performance ratio.<br />
Because of the installed sensors` technology in various areas, the scale is able to work in steps of 0,1g in the<br />
significant range. This ability enables a result that is ten times finer compared with the usual kitchen scales.<br />
Article: HP-VZ3010<br />
Digital Table Scale, 10kg<br />
Price<br />
€/piece<br />
from 1 piece<br />
incl. VAT<br />
net<br />
39,90 33,53<br />
Description:<br />
• Strain Gauge Precision Technology<br />
• Capacity: up to 10kg<br />
• Readability: 1g<br />
• Display Modes: g / kg / oz / lb / tl<br />
• Key with Full Function: ON/OFF/TARA/ZERO<br />
• Auto/Manual Shut-Off<br />
• Powered by Battery (included) or Power Adapter<br />
The scale commands:<br />
• a high precision and sensitivity and a fast setting time (
COMPLETE SETS<br />
These sets have been specially put together to get a first introduction and handling with composite materials.<br />
Work instructions can be found on our website www.hp-textiles.com<br />
Carbon Coating - Complete Set<br />
With this set you are able to refine a component and thereby it gets an unique look.<br />
This set includes enough material for small to medium sized coatings.<br />
Article: HP-KS-CB<br />
Carbon Coating<br />
Price<br />
€/piece<br />
1 set<br />
incl. VAT<br />
net<br />
74,90 62,94<br />
The set consists of the following products:<br />
Quantity Designated<br />
800g<br />
Epoxy Resin Coating / HP-E25DM<br />
1m² Carbon Fabric approx. 195g/m² (Twill 2/2)<br />
1m² Peel Ply Fabric approx. 105g/m² (Twill 2/2)<br />
1x<br />
Radius Roller<br />
1x<br />
10 pcs Paint-/Laquered<br />
3x<br />
Velours Roller / HP-L1015<br />
5 Pair Nitrile Gloves - size XL<br />
5x<br />
Mixing Cups (plastic)<br />
5x<br />
Wood Sticks for Mixing<br />
1x<br />
Instruction sheet<br />
Complete Set‘s<br />
Instruction Carbon Coating<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 201
Fibreglass Repair Kit for Boat Building, Automotive Parts, Pools ...<br />
Optimal for repairs of GRP and for beginners!<br />
With this GRP set you are able to make repairs, e.g. filing work of small holes, repairs of cracks or repairs of<br />
osmosis affected components. This set offers a wide range of materials for the processing with small to medium<br />
sized repairs.<br />
If you do not have any experience with GRP work yet this set is the optimal start kit!<br />
Complete Set‘s<br />
Article: HP-KS-GFK01<br />
Fibreglass Repair Kit<br />
Price<br />
€/piece<br />
1 set<br />
incl. VAT<br />
net<br />
69,90 58,74<br />
Instruction Boat Building<br />
The set consists of the following products:<br />
Quantity<br />
Moulding Set - Complete Set<br />
1x<br />
1x<br />
1x<br />
Designated<br />
HP-XB-1000 XB-Thinner<br />
HP-P144/050 Glass Fibre Tape 144g/m² 101meters<br />
HP-E45KL-1600 - Epoxy Resin 1600g<br />
1m² HP-T163E Glass Fabric Silane Twill 163g/m²<br />
1m² HP-B320E Biax Glass Fabric 320g/m²<br />
1m² HP-T105P100 Peel Ply Fabric Twill 105g/m²<br />
1x<br />
1x<br />
1x<br />
1x<br />
1x<br />
1x<br />
1x<br />
1x<br />
HP-L1001 Laminating Set 10pcs.<br />
HP-L1097 Disposable Nitril Gloves 5 pairs<br />
HP-L1064 500ml Mixing Cups 5pcs.<br />
HP-L1061 Wood Spatula 10pcs.<br />
1 x Instruction sheet<br />
HP-L1015 Verlous Roller 10cm 3pcs.<br />
HP-L1054 Satinless Steel Scissors<br />
HP-BF1-0100 Cotton Flocks 100g<br />
HP-PK22-1 Thixotropypowder 1liter<br />
With this set you are able to create a positive or negative model from a basic model.<br />
This set includes enough material for small to medium sized moulds.<br />
Article: HP-KS-FB<br />
Moulding Set<br />
Price<br />
€/piece<br />
1 set<br />
incl. VAT<br />
net<br />
74,90 62,94<br />
The set consists of the following products:<br />
Quantity Designated<br />
1100g<br />
Epoxy Mould Resin / HP-E30FB<br />
800g<br />
Epoxy Laminating Resin / HP-E45KL<br />
1m² Glass Fabric approx. 105g/m² (Twill 2/2)<br />
2m² Glass Fabric approx. 320g/m² +/-45°<br />
200ml<br />
Priming Wax<br />
200ml<br />
Film Release Agent PVA<br />
100g<br />
Cotton Flocks<br />
100g<br />
Chopped Glass Fibre<br />
1x<br />
10 pcs Paint-/Lacquered<br />
5 Pair Nitrile gloves size XL<br />
5x<br />
Mixing Cups (plastic)<br />
5x<br />
Wood Sticks for Mixing<br />
1 x Instruction sheet<br />
Instruction mould building<br />
2<strong>02</strong><br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Notes<br />
Ordering Information<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 203
Notes<br />
Ordering Information<br />
204<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
ORDERING INFORMATION<br />
OFFER:<br />
All offers are subject to confirmation and without obligation. All deliveries are based on our general terms and<br />
conditions. Miscalculate, clerical error, print mistakes and errors respectively authorise us to correct it, even in<br />
case the bill is already drafted.<br />
PRICE:<br />
Our prices depend on the latest valid price list. All prices quoted in our catalogue are net wholesale prices and<br />
subject to VAT of 19%. The prices are not including packaging & shipping.<br />
TERMS OF PAYMENT:<br />
Payment in advance (bank transfer):<br />
After placing your order you will receive an e-mail, containing your customer number, proforma-invoice, order<br />
number and the total amount of your order also including our bank details. Please indicate this information on<br />
the payment when paying via bank transfer.<br />
Account holder: HP-Textiles GmbH<br />
Account number: 624 1122 800<br />
Sort code:<br />
280 200 50 (Oldenburgische Landesbank AG)<br />
For bank transfers from foreign countries:<br />
S.W.I.F.T.-Code: OLBO DE H2<br />
IBAN<br />
DE2328<strong>02</strong>00506241122800<br />
The goods are dispachted within 24hours after receiving the payment.<br />
Direct Debit (Only available for German account holders):<br />
Ordering Information<br />
Paying my order by Direct Debit: After placing your order you will receive a form, which you will need to fill out<br />
and send to us bythe post office. In this form you will be asked to state your details such as invoice address,<br />
delivery address, date of birth and bank details (IBAN and BIC).<br />
After receiving the form back, we will proof your status and inform you immediately about the status of your<br />
order.<br />
The goods are dispachted within 24hours after receiving the direct debit form.<br />
Via PayPal:<br />
PayPal is designed to be a safer way to send money online. PayPal does not expose or sell customers financial<br />
information to merchants. Product features include information is automatically sent with a high level of data<br />
encryption, to help safeguard against identity theft, every PayPal payment is followed by an email confirming<br />
transaction and online safety essentials that contains the identity protection guide to help for avoid identity theft.<br />
After your online order you´ll receive an additional e-mail confirming your order incl. customer-number, proforma-invoice-number<br />
and total amount. Please indicate this information on the Paypal payment.<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 205
ORDERING INFORMATION<br />
DELIVERY WITHIN GERMANY:<br />
Dispatch Methods:<br />
The prices are calculated for standard parcel inclusive insurance (excluding hazardous goods or bulky goods<br />
fees) please see bellow the current prices.<br />
up to 2 Kg 5,90€ up to 50kg 19,90€<br />
up to 10 Kg 7,90€ up to 75kg 29,90€<br />
up to 25 Kg 10,90€ up to 100kg 39,90€ (the price includes 19%VAT)<br />
Extra Shipping Costs for Bulky Items and Hazardous Goods:<br />
Resin and hardener systems are treated as hazardous goods and some packaging units as bulky goods. These<br />
products are send especially via freight carrier only. For glass or carbon fabrics which are 100cm width or<br />
bigger, the shipping costs will be 9,70€. You will be informed in a separate e-mail about the shipping cost, if this<br />
applies to your order.<br />
Island Delivery:<br />
Delivery to islands has normally a fee of 14,50€ per courier service. Hazardous goods will only be delivered by<br />
freight carrier.<br />
Ordering Information<br />
Delivery per Forward Agency:<br />
Certain hazardous goods or very heavy rolls can only be dispatched by freight carrier.<br />
You can contact us per e-mail or even calling and requesting the shipping cost to your city or country. Otherwise,<br />
you will receive an e-mail with a confirmation concerning the shipping charges.<br />
The freight by truck depends on the weight and distance. The actual freight charges will always be charged.<br />
DELIVERY TIME:<br />
Please allow two working days for goods which are delivered within Germany and up to 6 working days for the<br />
delivery to foreign countries. The goods are dispachted within 24hours after receiving the payment.<br />
Order today, delivery tomorrow:<br />
With Guaranteed 24 Service it is possible to receive your goods the next day. The goods will leave our warehouse only<br />
after payment. Please note that the order must be made until 12 o‘clock and an 8,95€ extra charge for this service.<br />
*Apllies from Mondays till Thursdays.<br />
You can schedule your delivery for 8:00, 9:00, 10:00 or 12:00 o‘clock on the next day.<br />
* Please note that this service does not cover the whole of Germany, please inform us about your postal code<br />
(zip code) so we can check if the service is available where you live.<br />
* Please contact us for the exact total price for this service.<br />
WORLD WIDE DELIVERY:<br />
In case your country is not listed on the shipping list, please contact us regarding<br />
the shipping prices to your country.<br />
Tel: 0049 (0)5905 945 98 70<br />
e-mail: info@hp-textiles.com<br />
206<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
ORDERING INFORMATION<br />
DELIVERY WITHIN EUROPE:<br />
Delivery outside Germany are normally per courier service. Outside the European Union customs clearence costs<br />
or customs duties may occur, that will be charged from your account.<br />
SHIPPING PRICES FOR EUROPEAN-WIDE-DISPATCH BY PARCEL SERVICE (MAINLAND ONLY):<br />
COUNTRY up to 5kg up to 15kg up to 30kg up to 50kg up to 75kg up to 100kg<br />
Belgium*<br />
Bulgaria<br />
Denmark*<br />
England<br />
Estonia<br />
Finland<br />
France*<br />
Greece<br />
Irland<br />
Italy*<br />
Latvia<br />
Lithuania<br />
Luxembourg*<br />
Netherlands*<br />
Norway*<br />
Austria*<br />
Poland*<br />
Portugal*<br />
Romania<br />
Sweden<br />
Switzerland*<br />
Slovakia*<br />
Slovenia*<br />
Spain*<br />
Czech Rep.*<br />
Hungary*<br />
10,00 € 13,36 € 18,40 € 24,37 € 39,41 € 48,74 €<br />
upon request<br />
10,00 € 13,36 € 18,40 € 24,37 € 39,41 € 48,74 €<br />
15,61 € 18,26 € 22,41 € 35,89 € 55,76 € 71,78 €<br />
32,49 € 44,76 € 55,64 € 66,77 € 117,60 € 133,54 €<br />
26,81 € 32,35 € 39,41 € 54,54 € 86,89 € 109,08 €<br />
14,09 € 17,26 € 21,72 € 33,53 € 51,30 € 67,06 €<br />
upon request<br />
26,81 € 32,35 € 39,41 € 54,54 € 86,89 € 109,08 €<br />
19,54 € 25,79 € 33,32 € 56,<strong>02</strong> € 82,62 € 112,04 €<br />
32,49 € 44,76 € 55,64 € 66,77 € 117,60 € 133,54 €<br />
32,49 € 44,76 € 55,64 € 66,77 € 117,60 € 133,54 €<br />
10,00 € 13,36 € 18,40 € 24,37 € 39,41 € 48,74 €<br />
10,00 € 13,36 € 18,40 € 24,37 € 39,41 € 48,74 €<br />
26,81 € 32,35 € 39,41 € 54,54 € 86,89 € 109,08 €<br />
10,00 € 13,36 € 18,40 € 24,37 € 39,41 € 48,74 €<br />
19,54 € 25,79 € 33,32 € 56,<strong>02</strong> € 82,62 € 112,04 €<br />
26,49 € 35,76 € 46,64 € 77,77 € 93,90 € 117,60 €<br />
26,81 € 32,35 € 39,41 € 54,54 € 86,89 € 109,08 €<br />
19,54 € 25,79 € 33,32 € 56,<strong>02</strong> € 82,62 € 112,04 €<br />
upon request<br />
26,81 € 32,35 € 39,41 € 54,54 € 86,89 € 109,08 €<br />
26,81 € 32,35 € 39,41 € 54,54 € 86,89 € 109,08 €<br />
19,54 € 25,79 € 33,32 € 56,<strong>02</strong> € 82,62 € 112,04 €<br />
26,81 € 32,35 € 39,41 € 54,54 € 86,89 € 109,08 €<br />
26,81 € 32,35 € 39,41 € 54,54 € 86,89 € 109,08 €<br />
Ordering Information<br />
* Possibility to deliver hazardous goods (LQ) with parcel service (exclusive 19% VAT)<br />
Please contact us, if you require the shipping price for islands.<br />
Many resin and hardener products are categorised as hazardous goods and it is forbidden to send them via<br />
parcel service. For this reason we dispatch these products by forwarding agencies. Please ask for shipping costs<br />
to your country.<br />
Tel: +49 (0)5905 945 98 70<br />
e-mail: info@hp-textiles.com<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 207
Your system supplier for (fibre) composites<br />
HP-Textiles GmbH<br />
Otto-Hahn-Str. 22<br />
48480 Schapen<br />
Germany<br />
Phone: +49 (0) 5905 945 98 70<br />
Fax: +49 (0) 5905 945 98 74<br />
info@hp-textiles.com<br />
www.hp-textiles.com<br />
Our Strengths:<br />
Development and sales in one hand<br />
System Supplier<br />
Epoxy resins from own formulation<br />
24h Online-Shopping<br />
Cut out according to customer requirements<br />
Short delivery times worldwide<br />
Technical advice and training<br />
Certification ISO 9001