Finishing Yearbook 2022

I N D U S T R I E S Y E A R B O O K
44th EDITION • 2022
Made in Great Britain…
used all over the world
Braude are specialist manufacturers of
heating and cooling equipment using
high integrity fluoropolymer materials
for optimum chemical resistance
manufactured to the highest
specification in our UK factory
metal immersion heaters •
fl uoropolymer immersion heaters •
temp & level control •
external heating systems •
chemical pumps •
heat exchangers •
Used worldwide by:
• Steel strip manufacturers
• Wire & Tube
• Chemical Plants
• Metal Finishers
• Galvanising
• Aerospace Industry
• Chemical Millers
• Pharmaceutical & bio-chemical
• Water treatment
To see the entire range of Braude thermal process equipment visit
braude.co.uk
01252 876123 • sales@braude.co.uk
click through from our web site to find us
in social media, follow us for latest news

Poison under control.
SLOTOLOY ZN „Generation VX“
The alkaline zinc-nickel processes SLOTOLOY ZN „Generation VX“ are operated with an anode (special anode VX 1)
specially adapted to the process and respective additives. Because of this, the formation of breakdown products and cyanide
on the anode is inhibited. The practical application at customers showed in converted electrolytes that even the cyanide
content is reduced actively.
Advantages of the zinc-nickel
processes „Generation VX”
· No cost-intensive membrane technology necessary.
· Improvement of current efficiency and appearance.
· Simple conversion of existing electrolytes.
· Low additive consumption.
· The formation of cyanide is significantly reduced and
may falls below the detection limit.
· Since there’s less non-active tetracyanonickelate there’s
a lower demand of nickel.
Decrease of the cyanide content after the conversion to
SLOTOLOY ZN „Generation VX“
cyanide content [mg/L]
500
400
300
200
100
0
0 500 1000 1500 2000
bath throughput [Ah/L]
Schloetter Co. Ltd.
Abbey Works
New Road, Pershore
Worcestershire WR10 1BY
United Kingdom
T +44 (0)1386 552 331
info@schloetter.co.uk
www.schloetter.co.uk

www.finishingmagazine.co.uk CONTENTS 1
Editor
Barbara Williams
T. +44 (0)1923 432705
E.mail: b.williams@turretgroup.com
Display Advertising
Stewart Freshwater
Tel: +44 (0)7746 373 545
E.mail: s.freshwater@turretgroup.com
Production Manager
Carol Baird
Tel: +44 (0)1923 432705
E.mail: c.baird@turretgroup.com
Managing Director
Ian Garmeson
Circulation
Tel: +44 (0)141 370 3883
E.mail: circulation@
dimensionsmail.co.uk
Published by
Turret Group Ltd
Cardinal Point, Park Road
Rickmansworth
Herts WD3 1AY
Tel: +44 (0) 1923 432705
Web: www.turretgroup.com
Annual Subscription Rates
United Kingdom: £54.00
Rest of World: £64.00
Printed by:
Stephens & George Print Group
© Copyright Turret Group Ltd 2021
All Rights Reserved
All rights reserved. No part of this publication, in whole
or in part, may be reproduced in any form, or by any
manual, electronic or mechanical means, including
photocopying, recording, taping or other information
storage or retrieval system, without prior written
permission of Turret Group Ltd. In addition, the
publication may not be used to prepare or compile
mailing lists or other directories or buyers guides, or for
any other commercial purpose without prior written
permission of Turret Group Ltd. Requests should be
made to info@turretgroup.com. Steps have been taken
within the data contained herein to identify
infringements of this intellectual property and copyright.
Any unauthorised use of the data contained in this
publication will result in immediate legal proceedings.
Whilst every care has been taken in the compilation of
this directory, no responsibility can be accepted for errors
or omissions of any kind. Some colour photographs and
articles used within the editorial pages are provided and
paid for by suppliers. The views expressed by the
contributors are not necessarily those of the editor or
publisher.
44th Edition – ISSN no. 1464-0171
Introduction
Welcome to the 44th edition of the Finishing Industries Yearbook – the essential guide for everyone involved
in the UK surface treatment industry. Last year I wrote about the ‘new normal’, that limited contact with other
households. It impacted all aspects of business and home life. As I write there are still guidelines in each
country, but some overseas travel has been possible. With COVID-19 appropriate behaviour and the
vaccination progamme, the future seems more optimistic than this time last year.
We hope that you find this edition an invaluable aid to sourcing suppliers to provide the solution to your
specific needs. It is used by the whole buying chain from trade finishing houses to manufacturers of a wide
variety of products from white goods to automotive. Each year the categories in the Buyers’ Guide section are
reviewed with the following two new additions to make the guide more comprehensive: ‘’Tooling (Solid
Carbide)”, “Duct Work”, “Pretreatment” and ‘Iridite”’.
We would like to take this opportunity to thank all the businesses that have contributed to the compilation of
this yearbook. If you have any comments, suggestions or would like to be included
in the next edition, please email me at b.williams@turretgroup.com.
I wish you all the very best for 2022, and hope that it is not as ‘trying’ as this
year turned out to be!
Features
PRODUCT INDEX, A guide to using this directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A Year in Review, News items that appeared in the Finishing Journal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Company Profiles
Editor
All change at BRAUDE, a trading division of Heatrod Elements Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Net Zero Commitments, Low Carbon Goals, Sustainability Pledges, ESG, CSR, Fraser Technologies Ltd . 10
Almetron SURE ® SEAL 8596 MT mid temp sealing additive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Specialist producers and distributors of non-ferrous metals, chemicals & accessories, A.M.P.E.R.E. UK Ltd 12
Buttefield Group kick-start their powder coating business, PowderWorks, Gema Europe Srl . . . . . . . . . . 14
Measuring Made Easy - And now FREE... Fischer Instrumentation (GB) Ltd . . . . . . . . . . . . . . . . . . . . . . . . 14
Excellent atomization with new airspray product family, Wagner Spraytech (UK) Ltd . . . . . . . . . . . . . . . . . 16
Ultrasonic Cleaning Trials: Try Before You Buy with Ultrawave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Lanemark launches new in-house process gas burner test facility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Ultrasonic Cleaning: Best form of precision cleaning in the industry, EJ Electronics Ltd . . . . . . . . . . . . . . . 18
Increasing life and performance of critical components, Curtiss-Wright Surface Technologies . . . . . . . . . . . 19
Improved factory flow and production through automated paint plant, Haviland . . . . . . . . . . . . . . . . . . . . 20
Schloetter - Legacy plus Innovation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Making component cleaning work, D&S Ultra-Clean Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
IONPURE - A SIEBEC Innovation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
The ideal technology for any application?, SAMES KREMLIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Your Partners in Production, Total Coating Systems Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Futureproofing your process plant investment, NHE Applied Process Technology . . . . . . . . . . . . . . . . . . . 26
Cleaning Fluids that comply with European Medical Device Regulations, Kemet International Ltd . . . . . . 26
Syntha Pulvin ® Powder coatings, The Sherwin-Williams Company Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
The voice of the surface engineering sector, Surface Engineering Association . . . . . . . . . . . . . . . . . . . . . . . 28
Nasmyth West Middlesex looks to the future as it grows its technology . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Guides
Classified Buyers Guide Listing, Categorised breakdown of products by supplier . . . . . . . . . . . . . . . . . . . . . . . . 31
Regional Service Guide, Categorised breakdown of trade finishers - by regional area . . . . . . . . . . . . . . . . . . . . 45
A-Z Company Index, Full list of suppliers names and addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Registered Trade Names, Description of products by their trade name and supplier . . . . . . . . . . . . . . . . . . . . . . 76
Trade Associations, Details of various industry associations active in the field . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Calendar of Events, Details of various shows for the industry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
2022 edition – Finishing Industries Yearbook

SERFILCO INTERNATIONAL
Global Products, Local Service & Advice You Can Rely On
SerDuctor Airless Agitation for Improved Process
Control & Emissions Compliance
SerDuctor Airless Agitation
systems provide controllable,
turbulent movement where you
need it most whilst driving down
chemical emissions to help meet
legislative targets
• Reduce airborne emissions by ≥90%.
• Save tank heating costs up to 25%.
• Save metal as a result of more uniform brightness
and thickness distribution.
• Improves Throw deposit thickness in blind,
through holes and recesses.
• Permits use of increased current density,
especially compared to air or cathode rod
agitation, for faster plating rate.
• Reduces carbonates in alkaline processes.
• Reduces or eliminates gas-pitting.
• Provides constant agitation because SERDUCTOR
systems don’t clog.
For more information on our complete range of equipment & our competitive service
rates, or to talk to an engineer about your application contact Serfilco International:
+44 (0) 161 775 1910 global@serfilco.com www.serfilco.co.uk

PRODUCT INDEX 3
Product/Service Index
- and how to use this directory
Welcome to this, the latest, updated 2022 edition of the Finishing Industries Yearbook.
Using this publication will allow you to source suppliers of the products and services listed here quickly and easily.
There follows a complete index of all the components, equipment,
chemicals and other materials and services that are listed in the
categorised BUYERS' GUIDE and REGIONAL GUIDE, giving in each
case the page number on which that individual product category
begins. Under each heading, you will find a list of those companies that
have told us that they can supply that particular product or service, and
we pass that information on to you in good faith.
Immediately after the BUYERS' GUIDE SECTION comes the popular
REGIONAL GUIDE, which gives you the companies providing various
finishing processes in seven geographical regions of the UK and Ireland.
This allows you to identify a local company offering what you want.
Once you have found the relevant suppliers, refer to the alphabetical
A-Z COMPANY INDEX starting on page 48, where you can find their
full contact details, including e-mail and website addresses.
A
3-Dimensional Printing........................31
Abrasive Belts..........................................31
Abrasive Blasting....................................31
Abrasive Media ......................................31
Abrasives - Bonded...............................31
Abrasives - Coated................................31
Access Platforms (Man Riding).........31
Accessories...............................................31
Acid Plant .................................................31
Adhesives..................................................31
Advisory Services...................................31
Aerosol Recycling ..................................31
Air Assisted Airless................................31
Air Blowers...............................................31
Air Compressors ....................................31
Air Conditioning ....................................31
Air Fed Face Visors ...............................31
Air Pollution Control.............................31
Air Process Heaters ...............................31
Airless.........................................................31
Airless & Air Assisted Nozzles/
Tips........................................................31
Alocrom ....................................45, 46, 47
Aluminium Pretreatment.....................31
Anode Bags .............................................31
Anodes for Electroplating ...................31
Anodised Aluminium ...........................31
Anodising .................................45, 46, 47
Anodising Plant ......................................31
Anodising Services ................................31
Anodising, Chromic..............45, 46, 47
Anodising, Colour .................45, 46, 47
Anodising, Hard.....................45, 46, 47
Anodising, Sulphuric ............45, 46, 47
Anti Corrosive.........................................31
Anti Graffiti Coatings............................31
Application of Paint/Powder
Coatings...............................................31
Applications - Phosphating.................31
Aqueous Degreasing Bath
Regeneration......................................31
Aqueous Spray & Dip..........................31
Aqueous Washing.................................31
Architectural - Pretreatment & Powder
Coating ................................................31
Automatic Chemical Treatment........31
Automatic Cleaning Equipment .......31
Automatic Plating Plant .......................31
Automation ..............................................31
B
Barrel Polishing.......................................31
Barrel Polishing & Deburring............46
Barrelling...................................................31
Baskets ......................................................32
Bead Blasting ..........................32, 45, 47
Bead Blasting Equipment ...................32
Blackening & Blueing ..................45, 46
Blast Cleaning (Non Chemical)........32
Blast Cleaning Machines ....................32
Boilers........................................................32
Breathing - Air Sets..............................32
Bronze Plating........................................45
Brush Electroplating & Anodising...32
C
Cadmium Plating...........................45, 47
Carbide Burrs .........................................32
Castors & Wheels .................................32
Centrifugal Dryers ................................32
Centrifugal Finishing Machines .......32
Centrifugal Pumps................................32
Ceramic Beads .......................................32
Ceramic Coatings..................................32
Chemical Colouring.............................32
Chemical Milling ...................................47
Chemical Paint Strippers ....................32
Chemical Storage & Dosing .............32
Chemical Treatment .............45, 46, 47
Chemicals ................................................32
Chemistry.................................................32
Chromate Conversion.........................46
Chromating Materials..........................32
Chromating Service..............................32
Chromium Plating.........................45, 47
Cleaners....................................................32
Cleaning & Degreasing Machines..32
Cleaning & Degreasing Materials...32
Cleaning Equipment Chemicals ......32
Coating Application..............................32
Coating Quality Control .....................32
Coating Thickness
Gauges/Measurement...................32
Coatings ...................................................32
Coil Coating............................................32
Colour Measurement ..........................32
Complete Finishing Systems.............32
Complete Finishing Systems (Paint or
Powder Coat).....................................34
Component Cleaning & Etching.....34
Compounds ............................................34
Compressors...........................................34
Computer Systems...............................34
Conducting Paints.................................34
Conductivity ............................................34
Conductivity Meters.............................34
Consultants......................................45, 46
Consultants, Individual ........................45
Control Equipment...............................34
Control Systems ....................................34
Conveyors................................................34
Copper Patination .................................34
Copper Plating ...............................46, 47
Copper, Nickel & Chrome Plating..34
Corrosion Prevention...........................34
Corrosion Resistance............................34
Corrosion Resistant Coatings............34
Corrosion Resistant Coatings
(Fluoropolymer)................................34
Corrosion Resistant Coatings (Resin
Based) ..................................................34
Croffles/Thermal Insulation Spheres34
Curing Ovens (for paint and powder)
34
Curing Ovens (including infra-red) 34
Brush Electroplating & Anodising...32
D
Deburring Machines............................34
Deburring Service.................................34
Decorative Paint Finishes....................34
Degreasing & Cleaning Materials...34
Degreasing & Cleaning Plant...........34
Degreasing & Cleaning Solvent ......34
Delta Tone ...............................................45
Delta Tone Coaters...............................34
De-Nibbing..............................................34
Diaphragm Paint Pumps ....................34
Dip Painting ............................................46
Drum Pumps..........................................34
Dry Film Lubricants (Inc. PTFE)
Coating................................................34
Dry Filter & Combination
Spraybooth/Ovens..........................34
Dry Lubricant Coatings.......................34
Dryers........................................................34
Drying (Combined Vac/Hot Air) .....34
Drying Racks...........................................36
Duct Work ...............................................36
Dust Collectors.......................................36
Dust Extraction Systems .....................36
E
Eductor Nozzles ....................................36
Effluent Treatment Plants....................36
Electro Painting ......................................36
Electro Plating Equipment..................36
Electro Plating Services .......................36
Electroless Nickel Plating Equipment
36
Electroless Nickel Processes...............36
Electroless Nickel Service ...................36
Electroless Plating, Nickel ...45, 46, 47
Electrophoretic Coating.......................36
Electrophoretic Painting
(Electropainting) ...............................46
Electroplate Testing...............................36
Electroplating...........................45, 46, 47
Electroplating - Installations/
Removals ............................................36
Electroplating; Plating Chemicals ....36
Electropolishing Chemistry and Plant
36
Electropolishing Service ......................36
Electropolishing Stainless Steel.45, 46
Electrostatic..............................................36
Electrostatic Flock Coating .................36
EMC Shielding Coatings....................36
Enamel Coating Equipment ..............36
Enamelling...............................................36
Evaporation Recovery..........................36
Extraction Systems................................36
F
Filter Cartridges .....................................36
Filter Plant Equipment .........................36
Filter Pumps ............................................36
Filters - Anodising
Materials/Chemicals........................36
Filters - Spray Guns/Spraying...........36
Filters for Plating Solutions ................36
Finishes - Electrophoretic....................36
Finishes - Electrostatic..........................36
Flame Treatment....................................36
Flock...........................................................36
Flock Fibre Decorative Coatings
Equipment..........................................36
Flow Meters for Paints, Solvents,
etc..........................................................36
Fume Scrubbing Plant.........................38
Fume Scrubbing Plant.........................40
G
Galvanising (including Hot Dip).........46
Galvanising Plant......................................38
Gas Burners................................................38
Gas Fired Tank Heaters.........................38
Gas Infra-Red Ovens & Process
Heating...................................................38
Gas-Fired Ovens & Dryers...................38
Glass Bead ..................................................38
Gloss Measurement................................38
Gold Plating ...............................38, 46, 47
Grinding Jars (Ceramic).........................38
Grinding Products....................................38
2022 edition – Finishing Industries Yearbook

4 PRODUCT INDEX
Grit Blasting Equipment........................38
Gun Cleaners ............................................38
H
H.V.L.P. ......................................................38
Hardening & Tempering ....................46
Heat Exchangers ...................................38
Heat Treatment Ovens and Furnaces
38
Heaters, Electric Immersion...............38
Heating Systems for Finishing
Plant......................................................38
High Voltage Test Equipment...........38
Hooks & Jigs...........................................38
Hoses, For Airless and Conventional
Spray ....................................................38
Hot Dip Galvanisers.............................38
Humidifiers..............................................38
HVOF Spray Coatings.........................38
I/J
IImpregnation Services........................38
Indium Plating........................................46
Industrial Cleaning Equipment.........38
Infrared Heating Equipment .............38
Internal Coating Equipment..............38
Ion Exchange..........................................38
Ion Plating................................................38
IRELAND.................................................45
Iridite..........................................................47
Jig Cleaning ............................................38
Jigging.......................................................38
Jigs..............................................................38
L
Laboratory Mills.....................................38
Laboratory Testing ................................38
Lapping (Sub-Contract) ......................38
Lapping and Polishing
Compounds.......................................38
Lead Plating ............................................46
Liquid Level Controllers......................38
Lubrication Systems .............................38
Luminescent Coatings.........................38
M
Maintenance ...........................................38
Masking Lacquers.................................38
Masking, Caps & Plugs ...............38/39
Masking, Tapes, Discs & Shapes .....39
Masks ........................................................39
Masks and Hoods (Face)....................39
Materials Handling Equipment ........39
Mechanical Treatment .........45, 46, 47
Membrane Filters..................................39
Metal Cleaning ......................................45
Metal Finishing Plant ...........................39
Metal Polishing.......................45, 46, 47
Metal Polishing Services .....................39
Metal Spray Coatings..........................39
Metal Spraying ......................................39
Metal Wire...............................................39
Microscopes Optical ............................39
N, O
Nickel Plating (excluding
Bright).......................................45, 46, 47
Nickel Plating, Black..................................47
Nickel Plating, Bright................45, 46, 47
Non Destructive Testing .........................39
Non Destructive Testing Equipment
(NDT)........................................................39
Nonstick Coatings .....................................39
NORTH EAST .............................................45
NORTH WESTt ..........................................45
Optical Microscopes.................................39
Organic Coatings ......................45, 46, 47
Ovens & Tanks...........................................39
Ovens, In-line Burn-off............................39
Overhead Conveyor Systems..............39
P
Packaging Protection for Components
39
Paint ...........................................................39
Paint Circulation.....................................39
Paint Denaturing Chemicals..............39
Paint Finishing Coats............................39
Paint Stripper..........................................39
Paint Stripping........................................46
Paint Stripping Material/
Chemicals...........................................39
Paint Stripping Systems ......................39
Paint Testing............................................39
Painting.....................................................39
Paints - Marine.......................................39
Panel Spraying Equipment ................39
Passivating................................45, 46, 47
Passivation of Stainless Steel.............39
PCB Plating Jigs.....................................39
Personal Protection Equipment ........39
Phosphate Coating ...............................39
Phosphating.............................45, 46, 47
Phosphating Materials.........................39
Phosphating Plant .................................39
Photochemical Machining, Plating
& Finishing.........................................39
Pickling of Stainless Steel...................39
Plasma Spraying....................................46
Plastic Coating ................................46, 47
Plastic Finishing Plant...........................39
Plastic Media...........................................39
Plastic Spraying......................................39
Plating Bath Analysis............................39
Plating Materials/Chemicals ..............39
Plating on Plastic....................45, 46, 47
Plating with Aluminium ......................39
Platinised Titanium Anodes...............40
Plural Component Spray
Equipment..........................................40
Pneumatic Equipment .........................40
Polishing and Linishing Robots........40
Polishing Buffs........................................40
Polishing Chemical ...............................40
Polishing Drying Media ......................40
Polishing Machines...............................40
Portable Water Quality
Monitoring.........................................40
Powder......................................................40
Powder Coating..............40, 45. 46. 47
Powder Coating Equipment..............40
Powder Coating on Glass...................47
Powder Coating Removal Service...40
Powder Coatings ...................................40
Powder Coatings - Metallic ...............40
Powder Paint Reclamation Sieves....40
Powder Recovery Dust Collectors...40
Powder Sieving Equipment ...............40
Powder Spraying ...................................40
Powders For Electrostatic Spray
Coating................................................40
Powders For Flame Spray
Coating................................................40
Powders For Fluidised Bed
Coating................................................40
Precious Metal Chemicals and
Processes.............................................40
Precious Metal Electroplating ...........40
Precious Metal Finishing Plant .........40
Precious Metal Reclamation..............40
Pretreatment ...........................................40
Printed Circuit Chemistry...................40
Printing & Engraving on Metals ...........
Programme Control Equipment ......40
PTFE Coatings ................................45, 46
Pulse Plating Equipment.....................40
Pumps ................................................40/42
Purification of Anodising Solutions.42
Purification of Chrome Plating
Solutions .............................................42
PVD Coating Systems .........................42
R
Rectifiers ...................................................42
Rectifiers and Rectifier Control.........42
REST OF WORLD .................................47
RFI/EMI Shielding ................................42
Rinse Water Contamination
Controllers..........................................42
Robots.......................................................42
Rubber Linings ......................................42
Rubber Linings ......................................44
S
Salt Bath Nitriding ................................46
Salt for Salt Spray..................................42
Salt Spray & Combined Corrosion.42
Satin/Nickel or Satin Chrome, Plating
45, 47
SCOTLAND............................................46
Service & Maintenance.......................42
Service/Repair: Powder Spray Guns42
Shot Blasting ...........................45, 46, 47
Shot Peening...........................................47
Shot Peening Equipment ...................42
Shot/Laser Peening ..............................42
Silk Screen Printing.......................46, 47
Silver Plating....................42, 45, 46, 47
Solvent Distillers ....................................42
Solvent Recovery Plant........................42
Solvents ....................................................42
SOUTH EAST .........................................46
SOUTH WEST........................................47
Spare Parts...............................................42
Specialist Industrial Coatings
Applications .......................................42
Specialist Recruitment Services ........42
Spray Airless ...........................................42
Spray Booth Filters................................42
Spray Booth Wall Protector ...............42
Spray Booths...........................................42
Spray Booths - Coatings.....................42
Spray Booths - Water-washed ..........42
Spray Gun Extensions.........................42
Spray Guns/Spraying Equipment ...42
Spray Guns/Spraying Robots ...........42
Spray Nozzles & Accessories for
Cleaning Equipment.......................42
Spray Nozzles & Accessories for
Phosphating.......................................42
Spray Painting ........................................45
Spray Painting ........................................46
Spray Painting.........................................47
Spray Painting.........................................47
Spray Systems........................................42
Stainless Steel Passivation...45, 46, 47
Stove Enamelling...........................46, 47
Strip Plating.............................................46
Surface Analysis Services....................42
Surface Application...............................42
Surface Colour Measurement ..........44
Swabs for Covid-19 Testing...............44
T
Tack Cloths..............................................44
Tank Cleaning Automatic Spray
Equipment..........................................44
Tank Heaters (Gas Fired)....................44
Tank Linings............................................44
Tanks..........................................................44
Tanks (Bund)...........................................44
Temperature Controllers.....................44
Temperature Measuring &
Recording...........................................44
Test Panels ...............................................44
Testing & Technical Consultancy.....44
Testing, Research & Developmental
Organisations....................................46
Thermal Analysis ...................................44
Thermal Diffusion - Metal Coating.46
Thermal Fluid Heaters.........................44
Thermal Spray Coatings.....................44
Thermal Spraying..........................46, 47
Thermal Treatment ...............................46
Thermoplastics for Fluidised Bed
Coating................................................44
Tin Plating ........................................46, 47
Tin Plating, Bright .................................46
Tin/Lead Plating.....................................47
Titanium Fabrications...........................44
Tooling (Solid Carbide)........................44
Transformer Rectifier............................44
Two Component Metering
Equipment..........................................44
U
Ultrasonic Cleaning ..............................44
Ultrasonic Cleaning Equipment .......44
Ultrasonic Degreasing & Cleaning .44
Used Machinery....................................44
V
Vacuum Pumps .....................................44
Vapour Degreasing...............44, 46, 47
Vat Heaters..............................................44
Vibratory Finishing................................44
Vibratory Finishing Machines ...........44
Vibratory Polishing &
Deburring ...................................46, 47
Viscometer...............................................44
Vitreous Enamel Products..................44
VOC Abatement Systems..................44
W
WALES ......................................................47
Waste Disposal.......................................44
Waste Drum Recycling........................44
Waste Water Neutralizer ....................44
Waste Water Treatment Plant ...........44
Water & Energy Conservation..........44
Water Based Coatings.........................44
Water Based Electrostatic Spray
Equipment..........................................44
Water Chillers.........................................44
Water Purification Equipment...........44
Water Quality Monitoring..................44
Wet Blasting............................................44
Wire Spraying.........................................46
Wire Spraying.........................................47
Wood Finishing Plant...........................44
X, Z
X-Ray Analysis/Thickness Testing....44
Zinc Flake.................................................46
Zinc Plating..............................45, 46, 47
Zinc/Nickel Alloy Plating....................46
Zinc/Nickel Plating................45, 46, 47
Finishing Industries Yearbook – 2022 edition

Providing metal treatments
for the aerospace, defence
and associated complex
industries
PLATING
• Cadmium
• Electroless
Nickel
ANODISING
• Chromic
• Sulphuric
SURFACE
FINISHING
• Grit Blasting
CONVERSION
COATINGS
• Alocrom 1200
• Surtec 650
• Surtec 650V
• Passivation of
Stainless Steels
NON-DESTRUCTIVE
TESTING
• PFD*
• MFD*
*Process starting mid-2022
Nasmyth West Middlesex Ltd
Unit 5, Chartridge Development, Eskdale Road
Uxbridge, West Middlesex UB8 2RT, United Kingdom
Tel: +44 (0) 1895 252185

6 YEAR IN REVIEW
Year in Review
News Items that appeared in Finishing Magazine during 2021
by the Editor, John Hatcher - to submit editorial for the magazine, please email j.hatcher@turretgroup.com
January/February 2021
March/April 2021
n The 26th anniversary of the Galvanizers Association Galvanizing
Awards (GAGA) celebrated conservation, innovation and sustainability
when it was held online on Tuesday the 17th November. Projects that
prioritised radical conservation, portable architecture for sites at risk, and
a new vision for the first sake production on UK soil, just some of the
winners at this year’s GAGAs.
n The Board of Directors of Beckers
Group appointed Christophe Sabas
as the coating company’s CEO. Sabas
has been with Beckers for over 20
years and part of the Management
Team for 15 years.
n HMG Paints announced a new partnership with Symphony Coatings.
The partnership will see HMG’s industrial coatings and colour matching
facilities available from 3 additional Symphony Coating branches.
n A Wednesfield employee who started her career as an administrator
at a local galvanizing plant 24 years ago was appointed its general
manager.
Anita Bate, who joined the team at Edward Howell Galvanizers Ltd
back in 1996 to provide administrative support, was named the first
ever female general manager of both the plant and wider Wedge
Group Galvanizing Ltd business. Her appointment follows the
retirement of her predecessor, Kevin Addiss, who retired in 2020 after
44 years with the company.
n Tom Bowtell, CEO of the British Coatings Federation, took over as
chair of the Royal Society of Chemistry’s Surface Coatings Interest
Group.
n According to a report by Grand View Research, the global
antimicrobial coatings market is expected to grow at a compound
annual growth rate of 12.8 per cent from 2020 to 2027 – and
antimicrobial additives provider BioCote has reported an unprecedented
increase in revenue over the last year – with many of its customers
requiring antimicrobial paints and coatings.
n The cost of key raw materials used in the manufacturing of coatings
is now significantly higher compared to the beginning of 2020, and the
trend is continuing.
Finishing Industries Yearbook – 2022 edition

YEAR IN REVIEW 7
May/June 2021
n Axalta won three bronze Edison
Awards in the categories of Innovative
Services, Sustainability and
Engineering and Materials Science.
Named after Thomas Edison, the
Edison Awards have recognised and
honoured some of the most
innovative new products, services, and
business leaders in the world since 1987.
n Dustcontrol AB was officially certified according to ISO 45001 on
Occupational Health and Safety, further highlighting its commitment to
provide a reduced ecological impact and safer working environment.
n The latest survey of British Coatings Federation (BCF) members
revealed UK coatings manufacturers are increasingly concerned about
the effects of the new UK chemical regulations. Almost 80% of
respondents believe UK REACH will impact negatively on their
businesses, with the fear that there will be a significant reduction in the
portfolio of available chemical substances in the UK compared to the
EU, and 67% of respondents fear higher costs in the future where
suppliers pass on the costs of complying with UK REACH. Worryingly,
19% of respondents are already reporting that EU suppliers no longer
want to.
September/October 2021
n Interpon published a white paper detailing trends in sustainability and
their impact on the construction and architectural sectors, and in
particular how current and future developments in powder coatings are
helping customers and the wider world meet challenging environmental
targets.
July/August 2021
n Axalta Coating Systems entered into definitive agreements to acquire
U-POL Holdings Limited (“U-POL”) from Graphite Capital Management
LLP and other holders for £428 million (approximately $590 million)
subject to certain adjustments set forth in the sale and purchase
agreements for the transaction.
n The 2021 “Award for Innovation and Entrepreneurship in Robotics &
Automation” (IERA) went to PixelPaint technology of ABB. Two highprecision
robots make car painting faster, more sustainable and flexible
– helping manufacturers to efficiently respond to individual demands
n Guyson International recently installed a Guyson Euroblast 7PF
(Pressure Fed) blast system into Merlin Archery, a leading designer and
manufacturer of tournament shooting archery bows. The blast cabinet is
used to deliver a uniform bead blasted cosmetic surface finish on their
range of machined compound bows and to enhance the surface
topography of components before anodising.
n After stay-at-home orders and too few face-to-face moments over the
last two years, people are craving authenticity, nature and meaningful
human interaction after living in a mostly digital world. Introducing the
Johnstone’s Trade by PPG Voice of Colour 2022 Colour of the Year:
Olive – a grounded, versatile and highly-adaptable grey-green, that
represents optimism in a post-pandemic world, building on nature’s
resilience.
n The cycling accessories team at Rodi – the €30 million Portuguese
manufacturer of aluminum rims and wheels – found an innovative way
of accelerating its environmental ambitions by switching from anodizing
to a more sustainable, energy-efficient process using Interpon powder
coatings from AkzoNobel.
n The British Safety Council’s renowned Five Star Occupational Health
and Safety Audit has been revised and updated. It now places greater
emphasis on assessing how effectively an organisation manages the
combined risks to workers’ health and wellbeing, as well as business
resilience and recovery.
n HMG Paints is continuing
it’s support of the Minutes
Matter Campaign, alongside
the British Coatings
Federation and its members.
The campaign has seen
HMG Paints and other paint
companies donate paint to
the conversion of iconic red
telephone boxes into
lifesaving defibrillator stations.
2022 edition – Finishing Industries Yearbook

8 COMPANY PROFILE
All change at BRAUDE
Neptune Immersion Heater
BRAUDE is well known throughout
the metal finishing industry
for the manufacture of heating
and cooling equipment for the
corrosive solutions found in many
of the processes, from acid
etching to electro and electroless
plating and has been providing
service to industry for over 60
years.
Since 2016 BRAUDE has been
a member of the Backer group,
which is part of the Element
division of the NIBE Group, well
known for pioneering MI based
heating elements. The company
has been absorbed into Heatrod
Elements in Bolton and all the
products are made in the
modern purpose-built factory.
The Braude sales office is
retained in Crowthorne not far
from it’s original home for the
last 46 years, in Sandhurst.
BRAUDE products are still
manufactured to the high quality
standards demanded by our
customers and all production and
processes are fully certified to
BS EN ISO 9001:2015, in
addition the factory is certified to
the environmental standard
BS EN ISO 14001:2015.
Products are up to date and
continually improving
It is BRAUDE policy to improve
and update our products
wherever possible using the latest
available technology. Braude
engineers are also continually
talking to customers so that any
specific modifications for their
application can be tailored to
their needs.
The safety of the products
in use is particularly important
to BRAUDE, and a number of
variations in heaters and
controllers have been added to
the range, to provide additional
protection, such as over
temperature protection for
heaters. These include the
Thermaster OTP and Thermaster
The new purpose-built Heatrod Elements manufacturing facility in Bolton
OTF (Thermal fuse) systems.
These combine with the HPD
system that has been available on
Polaris Popular and Modular
heaters for many years.
A full range of equipment
available from one source
The product range is continually
being extended as it is easier for
many customers to be able to
order from one place. The most
recent product to be added is the
Polaris Neptune range of Tubular
MI heaters. These have
a moisture proof head to
encapsulate the joint between
the heater and the lead which is
vital in any wet environment.
In addition, there is the Triton
range of tubular ceramic heaters
available in materials from
porcelain, stainless steel, or
titanium.
Excellent service and order turn
around
BRAUDE maintain stock of
both finished goods and
component parts so that
products can be either
despatched the same day as an
order, or a non-stock item can be
manufactured in a very short
space of time. The paramount
objective is to always satisfy our
customers’ requirements. Our
sales and technical staff are
always available to provide advice
and assistance.
BRAUDE engineers will calculate
specific heating requirements
The first thing to do when
selecting a heater is to estimate
the kW size required. The
engineers will calculate this once
they receive the tank details,
which can be done via a form on
our website.
The sales engineers have a
good understand of the
processes and can guide a
customer through the heater
selection procedure to suit the
application.
Committed to future growth and
development
Simon Ellam, the Managing
Director of Heatrod Elements
said ‘the Braude division is a
valuable and profitable part of
our company but we know that
if we do not invest in the brand
it will not grow and we will not
be able to continue to provide
the current level of service to
our customers.Therefore all our
developments are geared to
enable us to provide better
and more efficient products
and service which in turn will
lead to expansion. Our clients
can be certain that we are here
for the long term and will be
able to continue to support our
products once they are in use.
We have some exciting
opportunities through the infrastructure
and resource of the
Backer Group and will be able to
improve our service worldwide.’
For more information contact:
BRAUDE a trading division of
Heatrod Elements Ltd
+44 (0) 1252 876 123
sales@braude.co.uk
www.braude.co.uk
Finishing Industries Yearbook – 2022 edition

PROTECT
YOUR
VALUABLE
SURFACES.
Automated protection tape
application for all kind of
profiles or flats in different
materials. Single-sided,
double-sided, four-sided, flat or
round surfaces – our machines
match all your requirements.
SWISS MADE
T +41 44 926 44 88 • sales@muller.ch
www.muller.ch

10 COMPANY PROFILE
Net Zero Commitments, Low Carbon Goals, Sustainability
Pledges, ESG, CSR….
Whatever your business calls it,
now is the time to act on
reducing carbon emissions.
Graham Fraser, MD of Fraser
Technologies, discusses how
changing the chemicals
manufacturers use in their
cleaning processes can
significantly reduce carbon
footprint.
There has never been a bigger
focus on reducing carbon
emissions, with businesses,
financial institutions, cities, and
countries setting targets to
reduce emissions to net zero
before the middle of this century.
Almost daily, we’re seeing big
organisations make net zero
pledges and low carbon
commitments, as part of their
CSR (Corporate Social
Responsibility) policies and ESG
(Environmental, Social, and
Governance) principles, as more
and more people realise that we
must all act now to safeguard a
liveable climate for future
generations. We all have a part
to play in this and should be
making our own promises to do
what we can, and to only support
business who act on these
pledges.
While net zero is a vital longterm
goal, steep emissions cuts –
especially by the largest greenhouse-gas
emitters – are crucial
in the next 5 to 10 years in order
to keep global
warming to no
more than 1.5 °C.
How to reduce
carbon footprint
For organisations
looking to meet
carbon emission
goals, every
element of the
business process
should be considered,
and a good
place to start is
with cleaning. A
very simple switch can have a
major impact, especially for those
who haven’t recently checked
what products they use.
Cleaning solvents were
historically guilty of very high
global warming potential (GWP)
and had seriously detrimental
effects on the atmosphere.
However, there is a new
generation of solvents which
have been developed specifically
with the environment in mind
and are far less harmful than
comparable solutions.
Global warming potential
(GWP) is one of the methods for
measuring the impact a gas will
have on the atmosphere. GWP is
used to represent the equivalent
of C02 being released into the
atmosphere, where 1kg of C02 =
a GWP of 1. For companies
manufacturing gases, and for
those purchasing and using
them, it is critical to manage
environmental impact by keeping
the GWP as low as possible.
As a business, we too are
committed to reducing emissions,
and work hard to ensure we only
offer the most sustainable
products on the market. For
example, Opteon SF80 from
Chemours has an ultralow GWP
of less than 2.5, compared to
common F-gas solvents that can
have a GWP of up to 11,000.
The impact that this simple switch
can have is incredible – especially
as it is just as effective, and in
some cases more efficient, than
competitor products. So, not only
does it help meet lower carbon
goals, but it can also improve the
cleaning process and save
money.
How much carbon be saved by
switching solvents?
Many businesses have already
made the switch to lower GWP
solvents and have proven the
positive effect it can have. To
give an example, we recently
worked with an aerospace
manufacturer to find an
alternative to the high-GWP
solvent they were using. We
switched their solvent to SF80
and assisted in optimising their
processes to reduce solvent
consumption. This change
reduced their overall usage of
solvent by 28%, saved them
around £30,000 per year, and
significantly reduced their carbon
emissions. With a GWP of 990,
the CO2
emissions created
by the customer
were previously
equal to the
emissions of driving
143 times
around the world
(or 7.5 times to the
moon and back!).
With the switch to
SF80, the
customer’s new
emissions are the
equivalent of
driving from
Edinburgh to
Moscow.
The statistics on
global warming
are stark. 18 of the
19 warmest years on record have
occurred since 2001; Earth’s ice
sheets are melting by 413
Gigatonnes of mass per year; and
the sea levels are increasing by
3.3mm per year. More alarming
is that current targets fall short on
solving the climate crisis, so we
need to do more.
This issue can be almost
exclusively attributed to harmful
gases in the atmosphere, and we
can fix much of this by making
small changes in all that we do.
When it comes to cleaning
processes, the solution is already
available, with more environmentally
friendly solvents that
yield the same results, Making
this change could be one of
easiest ways to meet your
company’s carbon goals, while
playing your part in protecting
our Earth.
Fraser Technologies Ltd
sales@frasertech.co.uk
www.frasertech.co.uk
Tel: 01506 443 058
Finishing Industries Yearbook – 2022 edition

PYROLYSIS &
BURN OFF OVENS
UK’S LEADING MANUFACTURER
Our Pyrolysis ovens provide you with a quick and highly effective
process for the removal of plastic, paints and resins
Longworth’s pyrolysis & burn off ovens are second to none in design and build quality, built to last and have the latest
in technological features. Our ovens provide a quick and highly effective process for the removal of plastics, paints
and resins from jigs, filters, shelving, food trays, motors, automotive parts and a multitude of other components.
Accreditations
BS EN ISO 9001:2008
Call Longworth today for a no obligation meeting on how we can help you and your business
call
01254 680501
email
enquiries@bmlongworth.com
visit
www.bmlongworth.com

12 COMPANY PROFILE
Almetron SURE ® SEAL 8596 MT mid temp sealing additive
Following successful trials in its
piloting facility and extensive
online testing Almetron is pleased
to introduce SURE ® SEAL 8596
MT.
The launching of the product
could not be better timed given
the current rising costs of energy.
Using our SURE ® SEAL
8596MT represents a significant
saving in energy, carbon release
and all the associated costs, whilst
maintaining seal quality of a very
high standard.
SURE ® SEAL 8596MT is
suitable for use in all aspects of
anodising such as architectural,
automotive, aerospace, and
decorative the product is also
compatible for use following our
EHS pre-sealing which reduces
sealing times. The product
contains no heavy metals and is
produced in the UK.
Our piloting facility has also
enabled Almetron to trial new
formulations in its etching
additives specifically for use with
the newly developed re-cycled
aluminium alloys. Working alongside
global extruder/anodisers
and powder-coaters, we have
developed an excellent range of
etch finishes for anodising along
with range of Qualicoat approved
passivates for coaters, providing
excellent underpaint protection.
Sunita Punpanya head of the
technical department says two
years on the Piloting facility has
proven invaluable in both
product development and
providing our customers with
assistance in any special projects
they wish us to undertake. It also
assists our technicians in understanding
the functions of our
product range developing their
knowledge of our systems.
For any further information
on Almetron’s extensive pretreatment
and anodising products
and excellent support services
please don’t hesitate to give us
a call.
For further details contact:
ian@almetron.com or
technical@almetron.com
Tel: 01978 660297
Specialist producers and distributors
of non-ferrous metals, chemicals and accessories for the surface treatment industry
A.M.P.E.R.E. UK Ltd is the
subsidiary of the family owned
group A.M.P.E.R.E. Industrie
S.A.S. Specialising since 1967
in the production and distribution
of non-ferrous metals,
chemicals and accessories
for the surface treatment
industry.
With a solid and long term
strategy, strong partnerships with
the top ranking world mining
and chemicals companies have
been developed.
A.M.P.E.R.E.’s success is also
due to a sharp expertise in
import/export, trading,
international regulations for
chemicals and logistic (REACH
and specific rules of each country
we deal with).
Additionally, A.M.P.E.R.E. has
developed along the years some
other activities like sputtering
targets for vaccum coating (PVD),
the manufacture of zinc and
aluminium sacrificial anodes, and
the sales of
polishing powders
for glass
as well as rare
earth.
In order to
work closer
with our UK
customers,
A.M.P.E.R.E.
UK Ltd was
set up 10
years ago.
Today, we
have a strong
global
presence in the UK, providing
electroplating raw materials and
services to the surface finishing
industry.
A.M.P.E.R.E. UK Ltd
www.ampere.com
+44 (0) 121 244 1809
sales.uk@ampere.com
Finishing Industries Yearbook – 2022 edition

14 COMPANY PROFILE
Buttefield Group kick-start their powder coating business, PowderWorks,
with investment in state-of-the-art Gema system
PowderWorks was formed as a
standalone company in 2020,
though it has a long-standing
history with powder coating
through its parent company
Butterfield Group. Born from the
relocation and expansion of an
existing double-booth and box
oven spray shop into what it is
today, it holds over 97 years in
coating and finishing knowledge,
expertise and experience.
Sarah Butterfield, of
PowderWorks, explains
‘Investment into a
suspended line
allowed for additional
capacity
not just to cope
with the Group’s
existing customer
requirements,
which centre
around signage,
but also to offer
our services to other companies in
different sectors. The new Gema
system means we are now
equipped to take on a wide variety
and great volume of work,
PowderWorks is here for your
every powder coating need.’
Prior to investment, a great deal
of time was spent exploring the
latest market technologies with
deep evaluation across the
equipment manufacturers. Sarah
continued ‘Our overall vision was
for a state-of-the-art powder
coating facility offering high
quality finishing with a quick
turnaround and warranty to suit. It
was also important to have the
most environmentally-friendly
system possible. The energy
efficiency and powder waste
reduction from the Gema system
align with our green credentials’
A Gema Magic Compact booth
with fast colour changing technology
was installed along with recycling
cyclone, automatic reciprocator
guns and manual touch up
platforms to deliver high-quality
finished products through increasing
precision and control whilst
also enhancing speed, efficiency
and massively reducing waste.
Gema’s latest Opticenter, the
OC06, was used to feed the system
with powder. This incorporates all-inone
suction technology, Optispeeder
hopper with powder level detection,
ultrasonic sieve and automated
cleaning. These features have
all been engineered to make the
system as accurate and reliable as
possible, whilst keeping the physical
footprint low and need for
human interaction to a minimum.
Leon Hogg, General Manager
UK for Gema, explained ‘It was
clear during the evaluation stages
that PowderWorks were keen
to invest in the very latest
innovations that deliver quality
and performance benefits to their
future customer base. This
investment in the very latest
technology puts Powderworks in
a great position to serve new
customers in other sectors as well
as ensuring better quality and
reliability when coating the signs
they make at Butterfield.
For more information,
contact Gema on
01202 763942
Measuring Made Easy - And now FREE...
Do your product coatings meet specifications? Have you been supplied with the correct material?
Fischer will test your samples for
free using the latest instruments
and techniques and quickly report
the results*. We are a German
original equipment manufacturer,
and we help customers control
their processes, reduce scrap and
cut costs.
Our sample testing services can
help you:
• Prove your process – check it is
in control
• Validate your measurements and
process capability
• Take corrective action to prevent
non-conformity
• Check ‘goods in’ from suppliers
and verify that they comply with
the Certificate of Conformity
• Prepare for an audit
• Plan new process/product
development
• Save money and time!
Arrange your free sample testing
by booking a meeting with us at
our Application Centre in Pershore,
Worcestershire. Alternatively, send
your samples to us, or we can
arrange to collect them from you
where possible.
We will provide you with a Free
Sample Testing Report, usually
within ten working days or earlier,
including the measurement
method used, results, and
recommendations. *
Fischer Instrumentation
As a full-service supplier in the
field of surface testing, Fischer has
been developing instruments for
non-destructive material analysis,
coating thickness measurement
and material testing since 1953.
We offer a wide range of
measuring devices for different
industries: from simple handheld
devices for quick testing on the go
to fully integrated, high-end
systems that automatically monitor
your production.
Our customers never need to
worry about quality testing since
reliability and ease of use take top
priority at Fischer, so they can focus
on what matters: their work. We
take care of the rest.
*Subject to availability
Fischer Instrumentation
(GB) Ltd
Tel: 01386 577370
mail@fischergb.co.uk
W: fischerinstrumentation.co.uk
Finishing Industries Yearbook – 2022 edition

The Choice for the Professional Powder Coater
Gema UK
01202 763942
uk.sales@gema.eu.com

16 COMPANY PROFILE
Excellent atomization with new airspray product family
What do the TOPFINISH airspray
guns from WAGNER have in
common? They ensure excellent
atomization, a high-quality spray
pattern and perfect surfaces in a
wide range of industrial sectors -
whether in the wood, metal or
plastics industries.
Two variants are available as
manual guns: The TOPFINISH
GM 1030P with paint connection
and the new TOPFINISH GM
1030G gravity cup gun, which
was specially designed for smallarea
applications. The product
family is completed by the
TOPFINISH GA 1030 automatic
gun.
Thanks to the optimized air
duct, all guns ensure very low
paint mist and save on material
consumption. The large material
and air passages of the components
support perfect atomization
and at the same time allow very
fast working. Thanks to the nozzle
with an especially large material
passage, low- to high-viscosity
materials and coatings with a high
solids content can be processed
flexibly. Especially for coating with
UV and highly abrasive materials,
the automatic gun is also available
as a version with a membrane seal
- for switching times of less than
20 milliseconds and particularly
fast position changes in the
coating process.
Depending on the application, a
large number of proven air caps,
nozzle sizes and other accessory
components can be used, each of
which is compatible with all three
airspray guns. The different hard
plastic cups of the gravity cup gun
can be used several times. The
TOPFINISH GA 1030 can be
optionally supplied with several
circulation options, with and without
flush valve, and with different
base plates. Several adapters are
available for selection depending
on the desired mounting method
as well as for robot mounting.
Thanks to the two-part nozzle,
consisting of nozzle head and
nozzle nut, it is sufficient for
both the manual guns and the
automatic version, if necessary, to
replace only the nozzle head
instead of the complete nozzle.
But this is not the only reason
for a significant reduction in the
cost of wearing parts: all parts of
the guns that come into contact
with the material are made of
durable stainless steel, and the
needle also has a wear-resistant,
low-friction coating. The optimized,
particularly durable
packing and the specially coated
needle support uninterrupted
operation. As with all other
WAGNER guns, great importance
has been attached to a long
service life and easy handling in
the TOPFINISH product family.
Wagner Spraytech (UK) Ltd
www.wagner-group.com
01327 368410
enquiries@wagner-group.com
Ultrasonic Cleaning Trials: Try Before You Buy with Ultrawave
Ultrasonic Cleaning is the use of
sound waves through water to
create microscopic implosions,
removing contamination from
surfaces, nooks and crannies. The
imploding bubbles act like
microscopic scrubbing brushes
throughout the cleaning tank and
remove dirt from all over the item,
far more effectively than other
methods. Ultrawave’s ultrasonic
cleaning technology is highly
effective, removing contaminants
from surface areas inaccessible to
spray washing or manual cleaning.
Ultrawave’s 30 years’ experience
of designing and manufacturing
ultrasonic cleaning solutions for a
wide range of industries has
resulted in expertise they can
apply to finding the best solution
for your cleaning needs and
requirements.
One of the helpful options that
Ultrawave offer is a free, noobligation
Cleaning Trials. They
welcome customers to their
Cardiff manufacturing facility,
where you can see some of the
ultrasonic units in action as well as
testing how well your parts can be
cleaned. If Cardiff is a bit of a
distance for you, they are happy
to accept items by post for
Cleaning Trials, and they will provide
a report of the trials, and take
videos and photographs of the
process and results.
Every Cleaning Trial is
performed with individual
requirements in mind. The team
at Ultrawave know that you need
the best cleaning solution to make
your processes work for you. With
that in mind, they will test a range
of detergents, ultrasonic cleaning
units, and cleaning cycle times to
give you the most effective and
efficient solution for your
application. You can also trust that
the Cleaning Trial will be a true
reflection of the solution they
propose for you.
Ultrawave offer a wide range of
unit sizes and features, from a 1.5
litre benchtop to their 1000 litre
Argon unit. Using their experience
and knowledge of various industry
requirements, they will help you
find the best unit for your
application.
If you want to discuss how
ultrasonic cleaning can help you,
the experts at Ultrawave are
always happy to help, providing
advice, test cleans and solutions
for you.
Ultrawave Ltd
www.ultrawave.co.uk
+44 (0)2920 837337
sales@ultrawave.co.uk
Finishing Industries Yearbook – 2022 edition

EASY OPERATION.
DOUBLE PRODUCTIVITY.
SuperCenter EVO
Powder preparation & supply center
• Ideal for frequent & fast color changes
• High degree of automation for optimum efficiency
• Double-designed fresh powder station for increased productivity
wagner-group.com
Contact
Wagner Spraytech (UK) Ltd
a Member of WAGNER GROUP
Telephone: 01327 368410
enquiries@wagner-group.com

18 COMPANY PROFILE
Lanemark launches new in-house process gas burner test facility
Process gas burner specialists,
Lanemark Combustion Engineering
Ltd., has completed the development
of a new in-house testing
facility which is set to enhance
services to its customers. The
Nuneaton-based organisation,
which supplies burner systems
for applications ranging from
brewing and metal treatment to
automotive manufacturing and,
through an associated division,
the petrochemical industry, says
the new resource will enable
larger, more detailed equipment
analysis to take place while also
helping to optimise customers’
emission controls.
“Our range is based on process
tank, oven and duct heating
systems through, respectively, our
TX, FD, FDB and DB series,” says
Jeff Foster, Lanemark’s Sales
Director. “In all cases, our
success is centred on supplying
the optimum configuration for
each customer’s needs, so it is
vital that our equipment undergoes
the most rigorous testing
and analysis procedures – both
during product development and
pre-installation phases. This new
facility will make a major
contribution in this context.”
The announcement now of the
company’s enhanced capability in
this area will build on the role
played by Lanemark’s longstanding
testing installation. Jeff
Foster is keen to highlight key
areas in which the new installation
will help optimise this important
element of production.
“We can now test a greater range
of both tank and oven burners in
terms of size and output with
specified configurations to match
precise operating conditions,” he
says. He points out that this now
includes the company’s largest
tank heating burner design, the
TX80, using an 8” N.B. submersed
tube heat exchanger.
“A wider range of emissions can
also be monitored including NOx,
SO2, CO2, CO and O2 as a result
of the new facility incorporating a
Horiba PG-350 flue gas analyser,”
Jeff Foster explains.
The new test furnace now offers
a volume measuring six metres
in length and 2.5 metres in
diameter. No less than 25 viewing
ports are available, each fitted
with thermocouples to monitor
temperatures of up to 1350°C,
and pressure transmitters that can
accommodate a range from -5 to
+70 mbar. Alongside this, the TX
test installation provides improved
flue gas testing accuracy and is
able to address common issues
such as condensation.
“Both the FD and TX test
facilities are fully fitted with duct
work and dampers to accurately
reflect precise operating
conditions,” adds Jeff Foster. He
explains that extensive plc control
helps to optimise both set up and
monitoring processes.
“We have always believed in
working closely with our customers
to ensure that the equipment we
supply provides them with
optimised usage in terms of
performance, fuel consumption
and emissions, and our investment
in this new testing facility
underlines this commitment,”
concludes Jeff Foster. “With the
new service now up and running,
we believe even greater benefits
from our burner technology can
be realised by users across our
range of marketplaces.”
024 7635 2000
info@lanemark.com
www.lanemark.com
Ultrasonic Cleaning:
Best form of precision cleaning in the industry
Ultrasonic cleaning is proven to be
one of the best forms of precision
cleaning in the industry. The benefits
include being environmentally
friendly, having low running costs
and being energy efficient.
Choosing the right ultrasonic is
important to ensure you get the
best cleaning results. There are
multiple reasons as to why a
machine isn’t the correct product
for its use.
Size
One of the most important
aspects is size. The size of the
tank can determine a lot about
what ultrasonic power and
heating you need. You must
consider the largest component
you will be cleaning, the amount
of components you will be
cleaning at a time and how you
will be placing the components in
the tank.
Transducer Quality
The Ultrasonic transducer is what
produces the sound waves in
your tank. The quality of your
transducer and bond to your tank
are key components to effective
cleaning. Poor quality transducers
negatively affect even the newest
of tanks.
Ultrasonic Power
The way we measure ultrasonic
power is called RMS (effective.)
this stands for root mean square,
which is the square root of the
mean square. The power is given
within or next to the unit. This is
important when looking at
Ultrasonic cleaning tanks to
ensure you a measuring the like
for like output of an ultrasonic
cleaner. Some manufacturers
quote maximum output which
doesn’t represent what goes on
in the tank.
Frequency
Frequency is also important for
cleaning. The simple rule is the
higher the frequency the more
precise the clean. Most
applications will use a low
frequency; but optimum frequency
is 33 kHz. This brings an effective
clean without the noisiness of a
27khz frequency. This is used for
degreasing oily parts.
Another one of our most
popular frequencies is 40khz.
This gives a much finer, delicate
clean and can be used for complex
items with small structures
without causing damage, such as
medical/optical tools.
Component handling
Some of the most common
reasons for tank wear and
damage are users of ultrasonics
leaving components on the
bottom of an ultrasonic tank.
During consultation, manufacturers
will recommend the best way to
mount your product in the ultrasonic
cleaning tank.
For more information of the best
way to choose the perfect ultrasonic
cleaner. Please contact us
at enquiries@ejultrasonics.co.uk
or call 01527831678
Finishing Industries Yearbook – 2022 edition

COMPANY PROFILE 19
Increasing life and performance of critical components
Curtiss-Wright Surface
Technologies (CWST) provides
high quality surface treatments
which will improve the life and
performance of critical components
through its global network of
over 70 operating divisions and
specialist onsite teams. Our
surface treatments have been
successfully used by OEM’s in
major industries such as aerospace,
automotive, oil & gas and power
generation for many years.
We are only too aware of the
logistical challenges and costs
faced by our customers and so
we can offer a “One Stop Shop”
solution providing a wide range
of surface treatments including
Controlled Shot and Laser Shock
Peening, bespoke and trade
Coating Applications, Thermal
Spray Coatings and Parylene
Coatings for metal, alloy, plastic
and electronic components as
well as Analytical Services.
We offer our customers a
single source solution and point
of contact for all their surface
treatments, supporting their
requirements through our global
network of over 70 worldwide
facilities and on-site field teams,
improving and reducing
turnaround times and costs.
We are specialists in protecting
components from common
failures and reducing maintenance
costs for key industries such as
aerospace, oil and gas, automotive,
medical and general
industrial markets.
Building on the unique heritage
of Glenn Curtiss and the Wright
brothers, Curtiss-Wright Surface
Technologies has a long tradition
of providing innovative solutions
and building solid and trusted
customer relationships.
Full quality and customer
approvals including NADCAP,
ISO 9001:2008 and AS9100 Rev D.
Our facilities use state of the
art robotic equipment which has
been designed and manufactured
in-house specifically for our
customers’ work.
We keep in the forefront of
new materials and technology by
maintaining strong links with
industry associations and being
actively involved in research and
development projects.
To find out more, please visit
Curtiss-Wright Surface
Technologies
www.cwst.co.uk
01635 279621
eurosales@cwst.com
Leaders in surface engineering
Increasing the performance and life of critical components
SERVICES:
l Controlled Shot Peening
l Laser Shock Peening
l Thermal Spray Coatings
l Dry Film Lubricants
l Everlube ® Coatings Products
l Parylene Ultra-thin Conformal
Coatings
l Superfinishing
l On-site Processing
l Material Testing and Analysis
APPROVALS:
l NADCAP
l ISO 9001:2008
l ISO 13485
l AS9100 Rev D
www.cwst.co.uk | eurosales@cwst.com | 01635 279621
2022 edition – Finishing Industries Yearbook

20 COMPANY PROFILE
Improved factory flow and production through automated paint
plant
Powder coating plant and
equipment specialists Haviland
Ltd were awarded the contract to
update, modernise and automate
the painting facility at REDHILL
manufacturing, a leading uk
manufacturer of industrial storage
and access solutions.
Haviland designed and installed
a turnkey package including a
new design of power and free
track system. This new design
eliminates the consistent running
noise usually associated with
power and free systems. Due to
extensive testing and design of
the interlocking mechanism
between the towing dog and free
trolly, this system allows for rise
and fall of both loaded and
unloaded flight bars, allowing for
increased versatility in their plant
layouts. Flight bars are flagged
and directed to set areas,
allowing for multiple systems to
be integrated into one conveyor.
The system installed linked two
independent downdraught powder
booths to one cure oven and then
on to multiple off load areas
within the factory via points and
pneumatic pushers to eliminate
any non value added activities
spent manually moving components
in between work spaces.
Systems are fully configurable
in respect to screen display and
visual feedback. This particular
one is managed via a smart system
controlled from one central panel.
The programme shows a number
of configurable screens with live
feedback of flight bar tracking,
full plant over view, individual
process areas along with a maintenance
screen. Live oven capacity
and count down till the next
release. A system which has user
interface as a core design criteria.
The oven is designed to use
the indexing capabilities of the
power and free conveyor to process
flight bars. As a product enters via
the automatic doors, it is timed. A
queue of flight bars builds up
within the oven, each product
completing its programmable
time. Once the time is complete,
it exits through a further set of
doors to the unload stations. This
process saves both energy by
retaining heat within the oven,
along with the space required to
run a conventional tunnel oven.
A step forward with design
from Haviland has created a
versatile system with many
applications.
Haviland Ltd
Tel: 0115 944 4159
haviland.ltd@outlook.com
www.haviland.ltd.uk
Schloetter - Legacy plus Innovation
As part of a privately-owned
worldwide group of associated
companies, Schloetter develop,
supply and support a wide range
of products and processes for the
finishing industry.
The group of companies,
originating in Germany in 1912 and
founded by Dr Ing Max Schlötter,
focussed its business around the
developments of metal plating
processes and has a very strong
research and development heritage.
Metal plating processes still form
the majority the company’s business,
whether this is for functional or
decorative applications.
This business direction has
however led the UK company into
the complimentary development
of paints and lacquers. The initial
focus was for the protection of
thin layers of very white, decorative
silver plate produced by the
companys ELFIT silver plating
process. This led on to the
development of business in the
compact disc industry and in more
recent times progressed to a full
range of organic paints on many
substrates for both decorative
and protective applications. A
significant part of todays business
is related to the alcohol industry
which seems to gain many peoples
interest. Paint is used to enhance
the properties and appearance of
glass bottles and this has become
well established business for the
company.
In 1969, supported by the
headquarters in Germany, the
UK business started with office
facilities in Birmingham and
warehouse facilities in Droitwich.
Success was rapid. The products
were clearly very good quality
however the technical support
offered by the company, commonly
expected in todays market place
but novel in the UK at that time,
was a significant factor in the
success of the company.
Growth of the Electronics and
Printed Circuit markets in those
early years also contributed to the
success of the business and it was
recognised that the business
needed to be brought under one
roof. The business moved to
Pershore in Worcestershire and
has gone through a number of
expansions over the years. The
site now houses admin offices,
warehousing, manufacturing
facilities, full technical service and
Q.A. laboratories for both
chemicals and paint. This also
includes Research and Development
of the vast array of paint
materials offered by the company.
Increased corrosion protection,
wear resistance or just improving
the aesthetics and visual
appearance of its customers
products, Schloetter continue to
offer a significant range of
options for consideration.
Tel: 01386 552331
E-mail: sales@schloetter.co.uk
Web: www.schloetter.co.uk
Finishing Industries Yearbook – 2022 edition

22 COMPANY PROFILE
Making component cleaning work
Component cleaning performs a
critical, yet often undervalued,
role in the manufacturing
process. Many companies
clean components but not all
of them do it well, or get the
best value for money from the
process. It is a commonly held
view that component cleaning
doesn’t ‘add value’ and so little
attention is given to managing the
process. The same logic is applied
when purchasing new
equipment with decisions
often being based purely
on price. However, the
importance of cleaning
comes sharply into focus
if the equipment breaks
down, leading to lost
production or increased
reworking.
For many years, a
debate has raged
regarding the relative
merits of solvent and aqueous
cleaning. It’s fair to say that each
has its place and neither is the
universal panacea. In truth, the
cleaning technology must be
matched to the application as
some contaminants, such as oils
and greases, are best removed
with solvent whilst others, such
as fingerprints, require water.
The type of substrate is also
important as some metals
corrode when in contact with
water, whilst many polymers can
be damaged when in contact
with solvents. Identifying the
right combination of equipment
and chemistry requires a little
time and effort but that
investment can bring the
long-term benefits of a better
standard of cleanliness and
reduced running costs.
Since its formation in 2001,
D&S Ultra-Clean has been
committed to providing
sustainable, cost-effective
solutions to component cleaning
problems. We take the time to
understand the application and
offer a free, no obligation,
evaluation service to identify the
most appropriate cleaning process
and equipment. Unlike many of
our competitors, we supply both
solvent and aqueous cleaning
equipment, which means we can
provide completely unbiased
advice on the option that best suits
the application.
If you’d like to find out how we
can make component cleaning
work for you, contact us on
sales@ds-ultra.com, or visit our
website at www.ds-ultra.com.
IONPURE - A SIEBEC Innovation:
Continuously eliminates metal polluting the Chromium (III) baths in order to guarantee optimal concentration and
constant part quality
Why IONPURE? Each time parts
are plated ionic metal impurities
are removed from the parts. They
contaminate the Chromium (III)
bath and this reduces the plating
quality. The IONPURE treats the
Chromium (III) bath continuously,
keeping the metal ion pollution
to a minimum. Thus, there is no
interruption in production and
the volume of effluent is minimal
when compared to the traditional
method of dilution or complete
replacement of the
solution.
The treatment utilizes specific
ion exchange resins. Once the
resin is saturated (50g of metal
for 1 litre of resin), IONPURE
switches to regeneration mode to
clean the resin of impurities in
order to reuse the resin. Once
clean the IONPURE is again
used to remove the metal
impurities from the bath. It is
important to note that the
regeneration cycle is initiated
after analysis of the Chrome
solution.
Key benefits of IONPURE
• Durable and profitable
investment
• Quality parts. Guaranteed
• Increased Productivity
Resin collection capacity (pH 2-3)
Metal Cu Zn Ni Fe
Concentration (g/l) 40 15 30 15
SIEBEC UK
email sales@siebec.co.uk
phone 01785 227700
www.siebec.co.uk
Finishing Industries Yearbook – 2022 edition

We solve our customers filtration,
chemical transfer and treatment needs.
Contact us
SIEBEC UK Ltd, Stafford
+44 (0) 1785 227700
sales@siebec.co.uk
www.siebec.co.uk
PUMPS & FILTERS
L SERIES | Medium flow rate filter
P SERIES | Ultra-high flow rate filter
A SERIES | Mechanical seals pump
M SERIES | Magnetic drive pump
T SERIES | Vertical pump
[...]
FILTER MEDIA
L-TECH | Pleated cartridge
BAGTECH | Filtration bag
QUALITHERM | Extruded cartridge
QUALIBOB | Wound cartridge
ANODTECH | Anode bag
[...]
SPECIAL SYSTEMS
ACIDPURE | Acid recycling
EASYPURE | Fluid recycling
IONPURE | Ionic filtration
ACIDVAC | Acid draining vacuum
EDUCTORS | Bath agitation
[...]

24 COMPANY PROFILE
The ideal technology for any application?
SAMES KREMLIN answer this question
The ideal paint application
solution...? All SAMES KREMLIN
solutions answer this question that
many customers ask themselves.
HVLP or Conventional,
Airmix ® , Airless ® (*), Electrostatic,
Powder coating, many technologies
are available to spray paint
on parts. It is very complicated
for a production manager to find
his way around.
Spraying technology must be
perfectly adapted to the customer's
production. The elements
are numerous... What type
of application do we do?
Is it a protective or
embellishing application
on the part? On visible
or non-visible parts?
Complex or simple
design parts? What type
of substrate - metal,
plastic, wood? On high
or low production
volumes?
So many questions for a
project manager. SAMES
KREMLIN offers a whole range
of solutions to be as close as
possible to the customer's
needs.
Protecting, Embellishing,
Painting visible or non-visible
parts, complex and less complex
or flat, with a high transfer rate,
in Manual, Automatic or Robotic
applications.. ?
SAMES KREMLIN solutions
allow companies of all sizes to
respect the fundamental concept
of Colorcare. From the pump to
the applicator, through its
mastery of paint transfer, its
regulation, colour changes
without shearing the paint to
keep the exact colour required,
its ability to manage an almost
infinite number of colours,
SAMES KREMLIN provides
complete and durable solutions.
It is important to understand
that each application, each
production has its own
application technology, its own
solution. The great added value
of a historical equipment
manufacturer such as SAMES
KREMLIN is to meet the exact
needs of the customer with
solutions perfectly adapted to
his specifications and this
thanks to all the solutions
proposed. Six complete ranges
from pump to applicator, in
Airspray, Airmix ® , Airless ® (*),
Electrostatic, Powder and even
Bonding or Sealing will provide
you with a true customer
experience that combines
performance, productivity and
sustainability.
With its network of more than
400 distributors worldwide, the
proximity of SAMES KREMLIN
teams will give you the
confidence and support you need
to start, monitor or optimize a
complete installation.
(*) Registered trademark FR n° 1 222 301
You can discover all our
solutions on our website and
our social networks.
#Applyyourskills
www.sames-kremlin.com
Your Partners in Production
We know how important it is to
keep on spraying, and we know
what's required to do so. When
you need a new tip, a new air
cap, a spare for your spray gun,
a repair on your sprayer... you
need them now! That's why it
is so beneficial to be in contact
with a supplier who strives on
getting these parts & services to
you as soon as possible; that’s
why we are your partners in
production.
If you require a machine to be
repaired or serviced don't
hesitate to contact us via email or
landline and talk to one of our
professional in-house engineers.
Feel free to drop the unit off
yourself or we can get it picked
up via courier for an additional
fee. We are happy to work on
almost any type of machine due
to our extended supply chain of
spare parts.
Not only do we service and
repair machines… we also offer a
wide collection of paint spraying
equipment, ranging from airless
to HVLP to airless-air-assisted.
Pumps, turbines, spray guns,
spray machines, extension poles,
pressure pots and more are all
available online or in-store for
competitive prices. Top quality
brands such as Apollo, Graco,
Airlessco, IBK, Durr, Berizzi, Rich
Star etc. ready for you to pick up
and spray.
Spray booth installation?
Look no further. Our
experienced team will plan,
design, install and upkeep
plant services including
conveyor systems, spray
booths, paint ovens and
more. Maintained with the
care and professional insight
needed to keep your plant in
production.
Featured product: Apollo 7700
HVLP Spray Gun
The A7700 spray gun is a gun
designed and produced by
Apollo, a company whose sole
focus is on HVLP spraying.
Arguably the greatest HVLP
spray gun in the industry
(as we have been told many
times by happy customers.) If
you are interested in purchasing
the award-winning spray gun
you can use the discount code
“FINISHING” on
www.totalcoatingsystems.com
for a 10% discount!
Total Coating Systems Ltd
www.totalcoatingsystems.com
01509 237415
sales@totalcoatingsystems.com
Finishing Industries Yearbook – 2022 edition

We provide
INDUSTRIAL
SOLUTIONS
for productivity,
quality improvement,
material & cost savings
WORLD LEADER IN
PRECISION SPRAYING SOLUTIONS,
SAMES KREMLIN offers customers
COMPLETE SOLUTIONS FROM PUMPS
TO COMPLETE APPLICATION SYSTEMS.
Our products pursue
the following key objectives for our customers:
PERFORMANCE, PRODUCTIVITY & SUSTAINABILITY
Making Manufacturers More Competitive
Visit our website to know more about our Solutions
www.sames-kremlin.com

26 COMPANY PROFILE
Futureproofing your process plant investment
For as long as the metal finishing
industry has existed, manufacturers
hired the expertise of integrators
to reduce risk and build tailored
process plants. As the industry
evolved the expertise required
from an integrator changed from
competency in fabrication and
chemical handling to engineering
excellence of all aspects of material
utilisation, operational parameters
and process safety. At NHE we
understand the critical nature of
high capital, long
term investment in
process plants and
therefore make
protecting your
return on investment
our focus. That
focus centres on
optimising total cost
of ownership and
our commitment
to operational
excellence, design
for safety and serviceability.
Operational excellence:
Building on decades of experience
and feedback from customers we
identify and eliminate areas of
waste. This is why NHE can
guarantee you a leaner operation
with reduced heat, energy and
chemical losses. In addition to our
efficiency centric process plants,
our wastewater treatment
innovations will aid you in
reclaiming many of your spent
fluids and reaching your
environmental commitments.
Safety and compliance:
Supported by our partners in
various institutions and regulatory
bodies we keep abreast of the
latest laws and regulations for
operating chemical process
plants, in line with compliance
obligations and best practice
initiatives. We also put ourselves
in the place of your team while
operating the line. This is reflected
in all our process plants where
NHE solutions are designed,
manufactured and third-party
certified to offer a safe working
and surrounding environment.
Design for serviceability:
At NHE we adopt a design for
serviceability philosophy. Our
process plants will offer you the
required OEE, productivity and
availability for the service life of
equipment. This commitment is
only achieved through machine
maintenance and our preventative
planned maintenance programme.
All our process plants are
designed and built with easy and
safe maintenance access, and
with viewing and maintenance
platforms when necessary.
For more information on
how our focus on operational
excellence, design for safety and
serviceability can improve your
operations in the areas of metal
finishing, FPI testing, and
wastewater treatment please visit
our website www.nhe.uk.com.
NHE Applied Process Technology
www.nhe.uk.com
024 7625 3099
info@nhe.uk.com
Cleaning Fluids that comply with European Medical Device
Regulations
The Kemet cleaning fluid range
is designed to be efficient,
simple and compliant. The simplification
of this range was made
possible by the implication and
coordination of all departments:
R&D, production/HSQE,
purchasing. Informed about the
new challenges the medical
industry faces, they managed to
condense contradictory
requirements: efficiency,
availability, cost control, regulatory
compliance.
Kemet International are the UK
distributor for NGL Nordic A/S
with more than 300 high
performance formulations
providing a solution to most
cleaning challenges.
In addition to regulations and
standards, NGL's approach
includes knowledge of materials
but also anticipation of process and
material evolutions, such as
additive manufacturing,
or passivation following laser
marking. Extending their
collaboration to other players in
the production chain (equipment
manufacturers, consultants,
laboratories, manufacturers of
consumables, etc.) allows us to
develop new solutions.
ISO 9001, ISO 14001 and
ISO 45001 are the basis of their
quality management, in addition
to multiple control steps all along
the production cycle. They are
committed to continuous improvement
in order to bring ever better
quality to their customers.
In a Medical Device cleaning
process, avoiding bacterial growth,
especially in demineralised water
rinses, is a challenge. Water flows
through sections which can be
difficult to reach (bends, pipes,
pumps) where the presence of
micro-organisms is hard to
measure and control. Without
specific water treatment, biofilm
can develop and proliferate all
the way to the rinse tanks.
Prevention, through appropriate
pre-treatment of the water, is thus
essential, even if water is heated
to 70° and constantly circulated.
A pre-treatment solution has
been successfully implemented
for the final rinse of medical
devices prior to entry into the
cleanroom at Charles PERY, a
manufacturer of medical
implants and instruments in
France.
For more details contact Kemet
on Tel: +44 (0) 1622 755287,
email: sales@kemet.co.uk
or visit www.kemet.co.uk
Finishing Industries Yearbook – 2022 edition

Leading Process
Plant Solutions
Designed to meet your needs driven by:
• Operational excellence
• Safety & compliance
• Serviceability
• Surface Treatment, NDT &
Process Water Treatment
• Plant Modifications & Upgrades
• Servicing & Maintenance
nhe.uk.com | +44 (0)24 7625 3099
Kemet
Precision Lapping | Polishing | Cleaning | Materialography
Precision
Finishing Service
Renowned for reliability
and quality, our facilities and expertise enable
us to lap and polish most components and materials
to a specific surface finish and flatness, all with a CoC to a given
specification and precision cleaned in our Cleaning Technical Centre.
sales@kemet.co.uk
+44 (0) 1622 755287
www.kemet-enq.co.uk

28 COMPANY PROFILE
Syntha Pulvin ® Powder coatings
brand of The Sherwin-Williams Company
For more than 150 years,
Sherwin-Williams has been a
leader in the art and science of
coatings that excel in both beauty
and function. When it comes to
superior-performance architectural
coatings, Sherwin-Williams’
innovations drive the industry.
Whether it’s developing new
formulas to meet unique project
needs, testing long-term
performance, or creating solutions
for customers, Sherwin-Williams
has the expertise to make it
happen. Syntha Pulvin ® is the
premier architectural powder
coatings brand in Europe, setting
the industry standard in terms of
innovation, quality, and service.
Syntha Pulvin ® offers a wide range
of Architectural Powder Coatings
formulated to decorate and
protect architectural aluminum
and galvanized steel exposed to
extreme weather and ultraviolet
conditions. Available in a multitude
of color options, textures, and
performance specifications,
Syntha Pulvin ® has the optimal
powder coating for nearly any
building project need. The main
three Syntha Pulvin ® collections
are:
• Vision 2020 – An architectural
powder coating with a colour
palette inspired by colour trends
worldwide. Appropriate for both
commercial and residential structures.
Vision2020 represents
modernism and innovation
throughout the architectural
powder coatings industry.
• Anodite – Ultra Matt series of
Polyester powder coatings for
the Architectural market, with a
smooth and metallic appearance
designed to simulate the colors
of Anodizing but with the added
advantages of hiding surface
imperfections and defects in the
metal.
• Echelon – Hyper Durable
Powder Coatings for Superior
Weathering Performance.
The Sherwin-Williams
Company Ltd
liverpool.sales@sherwin.com
https://www.synthapulvin.co.uk/
The Surface Engineering Association
The voice of the surface engineering sector - representing the companies within it
Founded in 1887 and now
spanning the entire surface
engineering and finishing sector,
the SEA is the voice of the
industry, working at every level
to ensure that our members are
informed and fairly represented
in all key areas. We take an active
role on many UK and EU
committees and working groups
where legislation, standards, and
codes of practice are developed,
making sure that our views – and
those of our members – are
heard.
This representation on regulatory
affairs ensures that we are always
‘in the know’ regarding new, or
amended, legislation on health
and safety or environmental
issues that will impact the
surface engineering industry.
Our findings are fed back to
members regularly via our
website, committee meetings
and conferences.
So why not be a part of something
special – a unique club of
like-minded business owners,
because running a profitable,
compliant business in the surface
engineering sector is challenging.
At times it feels like the playing
field is far from level, particularly
when competing with overseas
competitors. If you join us, we will
have your back and you will have
the peace of mind that the Surface
Engineering Association is working
for you and the advancement of
your industry. You will feel like you
belong, and we will look after your
best interests, organise some
amazing events, and opportunities
to make new friends.
Why not join us and the
hundreds of surface engineering
companies across the UK to make
sure that your business can make
the most of the post-pandemic,
post-BREXIT opportunities?
You can sign up at
https://www.sea.org.uk/
membership-join-the-sea/ and the
benefits that you can receive often
outweigh the actual cost of
membership.
Surface Engineering Association
Tel: 0121 237 1161
info@sea.org.uk
www.sea.org.uk
Finishing Industries Yearbook – 2022 edition

Industrial
finishes
Architectural
Heavy
machinery
Superior coatings
made possible
by science-driven
innovation
Pipe
The Sherwin-Williams Company
Liverpool – ENGLAND
Ph. +44 (0) 151 486 0486
www.valspar.com

30 COMPANY PROFILE
Nasmyth West Middlesex looks to the future as it grows its
technology, processes to keep pace with customer demand
Specialist provider of metal
treatments for the aerospace
industry, Nasmyth West Middlesex
delivers specialist metal coatings,
corrosion prevention and
decorative surface solutions.
Operating out of its processing
site in Uxbridge, the company
offers Nadcap-approved chemical
processing services to customers
across the aerospace, defence
and other complex industries.
Recently, surface treatments
expert Andy Brasier has been
appointed as Nasmyth West
Middlesex’s new Director. Andy
brings with him a wealth of
experience, having also been
Director of Nasmyth West
Middlesex’s sister company, GEB
Surface Treatments for some
time – a role which he will
continue to fulfil alongside his
new responsibilities at Nasmyth
West Middlesex. Andy’s appointment
heralds the company’s
ongoing commitment to growing
and developing its customer
offering across the diverse global
sectors in which it operates.
Nasmyth West Middlesex
coatings offer a premium
foundation for paint and organic
components, along with minimal
changes to the surface
appearance. Its specialised
processes include cadmium and
electroless nickel plating, chromic
and sulphuric anodising, grit
blasting, stainless steels
passivation and chromate
conversion coatings Alocrom
1200 and 100, Surtec 650 and
650V. Alocrom 1200 and 1000
are primarily used as pre-paint
coatings in applications where
electrical conductivity is required,
as well as corrosion protection for
aluminium products.
Other Nasmyth West
Middlesex services include
masking and complex masking
processes, as well as salt spray
and x-ray fluorescent testing
laboratory assessments. In 2022,
the company will also introduce
PFD and MFD non-destructive
testing to its portfolio of offerings.
Andy says of his new role: “I
am delighted to be appointed as
Director of Nasmyth West
Middlesex. I look forward to
leading the company into 2022
and beyond as we grow and
develop the technologies,
processes and services that we
offer our customers.”
Simon Beech, COO of
overarching company, Nasmyth
Group, adds: “We congratulate
Andy on his new position and
wish him every success as we
look to grow our surface
treatment business.”
GEB Surface Treatments
operates out of Pinxton in
Nottinghamshire, providing
specialist component protection
products for the aerospace,
defence, energy, space, nuclear,
medical, automotive and other
key industries. Its products are
used in critical applications across
a diverse range of global
aerospace and engineering
applications via the company’s
strong working relationships with
top industry leaders.
Nasmyth West Middlesex and
GEB Surface Treatments are both
part of the wider Nasmyth
Group. The Group was
established in December 2003
and brings together the collective
experience, resources and
technology of twelve customerorientated,
precision engineering
businesses. Four separate
Nasmyth Group divisions
comprise electro-mechanical
systems, precision machining,
complex structures and welding
technologies and specialist metal
surface treatments. Each group
offers customers a comprehensive
product portfolio, a variety of
batch sizes including one-offs, as
well as exemplary after-sales
support. Nasmyth Group is
Nadcap approved for chemical
processing and accredited for
AS9100 Rev-C and ISO-14001.
Nasmyth Group’s capabilities
include CAD/CAM-supported
design and reverse engineering
using the latest analytical techniques
and testing facilities. The
Group also offers precision
machining and shaping of highperformance
metals and materials
for a range of industries,
including aerospace and defence.
Other services include systems
engineering and total product or
component solutions, as well as
construction, testing and
certification of simple and
complex structures using
advanced welding and assembly
techniques.
Finally, Nasmyth Group offers
plasticised, chemical and thermal
treatments and repairs, global
supply-chain management and
logistical solutions and best-inclass
after-sales support that can
be tailored to meet exact
customer specifications. More
than 800 specialist industry professionals
are employed by
Nasmyth Group around the
world, including in the UK,
Europe, USA, Canada and the
Asia-Pacific region, including s
upplier partnerships in India and
the Philippines.
The Nasmyth West Middlesex
website is at
https://www.nasmythgroup.
com/companies/west-middlesex
Finishing Industries Yearbook – 2022 edition

BUYERS GUIDE 31
Buyers Guide
Addresses for the suppliers of the products listed below may be found in the A-Z Company Index, which appears on
page 48.
3-Dimensional Printing
PI-KEM Ltd
Abrasive Belts
ATA Garryson Ltd
Abrasive Blasting
Airblast Eurospray
Ashton and Moore Ltd
Maxi-Blast, Inc.
Abrasive Media
Kemet International Ltd
Accessories
EXITFLEX supplied by Polyhose
UK Ltd
Acid Plant
BRAUDE a trading division of
Heatrod Elements Ltd
Adhesives
PI-KEM Ltd
Protech Chemicals Ltd
Ureka Global Ltd
Airless & Air Assisted
Nozzles/Tips
EXITFLEX supplied by Polyhose
UK Ltd
SAMES KREMLIN
Aluminium Pretreatment
A-Gas Electronic Materials
Powdertech (Corby) Ltd
Powdertech Surface Science
Pre-Treatment Solutions Ltd
Silchrome Plating Ltd
Anti Corrosive
Enviro Tech (Europe) Ltd
Anti Graffiti Coatings
Urban Hygiene Ltd
Application of Paint/Powder
Coatings
Joseph Ash Galvanizing
Powdertech (Corby) Ltd
SAMES KREMLIN
Silchrome Plating Ltd
Pometon
Scangrit
Sharmic Engineering Ltd
Abrasives - Bonded
ATA Garryson Ltd
Kemet International Ltd
Klingspor Abrasives Ltd
Lea Manufacturing
Phoenix Naylors Abrasives Ltd
SAIT Abrasives (UK) Ltd
Abrasives - Coated
ATA Garryson Ltd
Kemet International Ltd
Lea Manufacturing
Master Abrasives Ltd
Mirka (UK) Ltd
Access Platforms (Man Riding)
C & S Equipment Ltd
Advisory Services
Plating Line Advice
Aerosol Recycling
Unic International
Air Assisted Airless
EXITFLEX supplied by Polyhose
UK Ltd
SAMES KREMLIN
Total Coating Systems Ltd
Air Blowers
BEC Midlands Ltd
Jacquet Weston Engineering
Air Compressors
AE Industrial & Air Equipment
Ltd
Durnbury Ltd
Air Conditioning
Risby Air Conditioning Co Ltd
Air Fed Face Visors
AE Industrial & Air Equipment
Ltd
Air Quality Ltd
Air Pollution Control
Keller Lufttechnik GmbH + Co.
KG
Kimre, Inc.
Air Process Heaters
A-Gas Electronic Materials
Lanemark Combustion
Engineering Limited
Airless
AE Industrial & Air Equipment
Ltd
EXITFLEX supplied by Polyhose
UK Ltd
SAMES KREMLIN
Anode Bags
Hart Materials
PI-KEM Ltd
Anodes for Electroplating
A.M.P.E.R.E. UK Ltd
A-Gas Electronic Materials
Hart Materials
JL Goslar GmbH
PI-KEM Ltd
Schloetter Co Ltd
Anodised Aluminium
Badger Anodising (Birmingham)
Ltd
Italtecno Srl
Snell & Prideaux Ltd
SPL Blacking Ltd
Anodising Plant
BRAUDE a trading division of
Heatrod Elements Ltd
Jacquet Weston Engineering
NHE Applied Process Technology
Plasticraft
Turbex Ltd
Anodising Services
Ashton and Moore Ltd
Dorset Aluminium Products Ltd
Explomould Engineering Services
Ltd
Firma-Chrome Ltd
Glenmore Hane
Honeyglen Anodising Ltd
London & Brighton Plating Co.
Ltd
Mansfield Anodisers Ltd
Metro Engineering & Plating
Works Ltd
Peterborough Plating Company
Ltd
Silchrome Plating Ltd
Star Anodising & Finishing
Teign Metal Finishes
Applications - Phosphating
Ashton and Moore Ltd
Aqueous Degreasing Bath
Regeneration
Kemet International Ltd
Aqueous Spray & Dip
Kemet International Ltd
Aqueous Washing
Kemet International Ltd
MecWash Systems Ltd
Turbex Ltd
Wire Mesh Fabrications
Architectural - Pretreatment
& Powder Coating
Powdertech (Corby) Ltd
Automatic Chemical
Treatment
ProMinent Fluid Controls (UK)
Ltd
Automatic Cleaning
Equipment
Kemet International Ltd
NHE Applied Process Technology
Plasticraft
Automatic Plating Plant
Jacquet Weston Engineering
NHE Applied Process Technology
Plasticraft
Automation
FANUC UK Limited
Leuze Electronic Ltd
Power Jacks Ltd
Barrel Polishing
Sharmic Engineering Ltd
Barrelling
Sharmic Engineering Ltd
2022 edition – Finishing Industries Yearbook

32 BUYERS GUIDE
Baskets
Hart Materials
PI-KEM Ltd
Supreme Surface Treatment
Engineering Ltd
Wire Mesh Fabrications
Bead Blasting
Doug Booth (UK) Ltd
Bead Blasting Equipment
Doug Booth (UK) Ltd
Guyson International Ltd
Centrifugal Pumps
Apex Fluid Engineering Ltd
(Apex Pumps)
Ceramic Beads
PI-KEM Ltd
Ceramic Coatings
Keronite International Ltd
PI-KEM Ltd
Chemical Colouring
Blackfast Chemicals Ltd
Cleaning & Degreasing
Machines (cont.)
Ecoclean UK (SBS Ecoclean
Group)
MecWash Systems Ltd
Turbex Ltd
Vixen Surface Treatments
Ltd
Cleaning & Degreasing
Materials
Coatings (cont.)
Blast Cleaning (Non
Chemical)
Bettablast Blasting Services
Blast Cleaning Machines
CBI Equipment Ltd
Doug Booth (UK) Ltd
Hodge Clemco Ltd
Odlings MCR Ltd
Rösler UK Limited
Vohras International
Boilers
Babcock Wanson UK Ltd
Breathing - Air Sets
AE Industrial & Air Equipment
Ltd
Air Quality Ltd
Brush Electroplating &
Anodising
Chemical Paint Strippers
Almetron Ltd
Powdertech (Corby) Ltd
Chemical Storage & Dosing
Automated Water & Effluent Ltd
Chemicals
Almetron Ltd
Caldic UK Ltd
Cannock Chemicals Ltd
Chemetall Ltd
Chemox Pound Ltd
Dynaclean Spraybooths Ltd
Lhoist UK Ltd - Neutralac
Orapi Applied Ltd
PMD Chemicals Ltd
Rutpen Ltd
Sharmic Engineering Ltd
Almetron Ltd
Coating Technologies Ltd
Enviro Tech (Europe) Ltd
Oil Technics Ltd
Schloetter Co Ltd
Sharmic Engineering Ltd
Cleaning Equipment
Chemicals
Kemet International Ltd
Coating Application
Ashton and Moore Ltd
Orrmac Coatings Ltd
PI-KEM Ltd
Plastic Coatings Ltd
SAMES KREMLIN
Coating Quality Control
Elcometer Ltd
E/M Coating Services (CWST)
Hart Materials
New Guard Coatings North
PaintExpo
PI-KEM Ltd
Poeton Industries Ltd
Sandwell UK Ltd
Sherwin-Williams UK Ltd
Technispray Paints Ltd
Thermacure Ltd
Coil Coating
Spooner Industries
Tata Steel
Colour Measurement
BYK-Gardner GmbH
X-Rite Pantone
Complete Finishing Systems
Almetron Ltd
Dürr Ltd
Jacquet Weston Engineering
Saras Process Ltd
SIFCO ASC
Carbide Burrs
ATA Garryson Ltd
Castors & Wheels
Tente Castors Ltd
Centrifugal Dryers
BEC Midlands Ltd
Jacquet Weston Engineering
Rousselet/Robatel UK Ltd
Sharmic Engineering Ltd
Centrifugal Finishing
Machines
Kemet International Ltd
Sharmic Engineering Ltd
Chemistry
A-Gas Electronic Materials
Almetron Ltd
Blackfast Chemicals Ltd
PreTreat Ltd
Chromating Materials
Schloetter Co Ltd
Chromating Service
Ashton and Moore Ltd
Cleaners
Almetron Ltd
Henkel Ltd
John Neale Ltd
Cleaning & Degreasing
Machines
Cleentek Ltd
Coating Thickness
Gauges/Measurement
Advanced NDT Ltd
DeFelsko Corporation
DFT Instruments UK Ltd
Fischer Instrumentation (GB)
Ltd
Hitachi High-Tech Analytical
Science
Kett US
SciMed Ltd
Coatings
Ashton and Moore Ltd
Martin Brown Paints Ltd
Camcoat Performance Coatings
Ltd
Cromadex
Elmbridge UK Ltd
NHE Applied Process Technology
Nu-Pro Limited
SAMES KREMLIN
Total Coating Systems Ltd
Finishing Industries Yearbook – 2022 edition

Dam good river management
Beavers’ dams naturally cleanse rivers by reducing acidic water and agricultural run off.
But it’s all our responsibility to make sure the highest standards possible are met.
Beavers are doing their bit, are you doing yours?
®
Neutralac SLS45 is the solution:
• High strength 45% concentration liquid lime
• Developed especially for the treatment of wastewater
• Outstanding heavy metals removal efficiencies
• Exceptional phosphate precipitation properties
• Reduces costs through lower reagent consumption
Test the water with a no risk FREE trial.
www.neutralac.co.uk
TENNANTS
Simon Kelly
Product Manager
T: 0161 205 4454
M: 07970 134 455
simon.kelly@tennantsdistribution.com

34 BUYERS GUIDE
Complete Finishing Systems
(Paint or Powder Coat)
GEMA Europe Srl - UK Branch
Haviland Ltd
SAMES KREMLIN
Specialist Coatings Ltd
Three Spires Finishing Systems
Ltd
Component Cleaning &
Etching
Stowlin Croftshaw Ltd
Control Systems
Automation Solutions Ltd
BRAUDE a trading division of
Heatrod Elements Ltd
ProMinent Fluid Controls (UK)
Ltd
Conveyors
Amber Industries Ltd - MCM
Conveyors
Croffles/Thermal Insulation
Spheres
Degreasing & Cleaning Plant
(cont.)
Standard Industrial Cleaning
Systems Ltd
Compounds
Autoglym
Lea Manufacturing
Compressors
Atlas Copco Compressors Ltd
Computer Systems
Acton Gate Systems Ltd
Sumari Business Systems
Ltd
TricornDNAsp
Conducting Paints
Hart Materials
Conductivity
Hart Materials
Conductivity Meters
Automated Water & Effluent
Ltd
Control Equipment
BRAUDE a trading division of
Heatrod Elements Ltd
LTH Electronics Ltd
CALDAN Conveyors Ltd
Stewart Gill Conveyors Ltd
Copper Patination
Armack Chemicals Ltd
Copper, Nickel & Chrome
Plating
Hart Materials
Nu-Pro Limited
Corrosion Prevention
Enviro Tech (Europe) Ltd
Vapor-Tek Ltd
Winn & Coales (Denso) Ltd
Corrosion Resistance
ABT Products Ltd
Corrosion Resistant Coatings
Addev Materials Aerospace and
Defence
The Anochrome Group
Aqua Industrial Coatings Ltd
The Electrolytic Plating Co.
Ltd
Enviro Tech (Europe) Ltd
Greenkote Plc
Nu-Pro Limited
Protech Chemicals Ltd
Surface Technology
Zinga-UK Ltd
Corrosion Resistant Coatings
(Fluoropolymer)
Protech Chemicals Ltd
Surface Technology
Corrosion Resistant Coatings
(Resin Based)
A&E Systems Ltd
Protech Chemicals Ltd
BRAUDE a trading division of
Heatrod Elements Ltd
Curing Ovens (for paint and
powder)
Haviland Ltd
PI-KEM Ltd
Wisconsin Oven Corporation
Curing Ovens (including infrared)
Haviland Ltd
PI-KEM Ltd
Total Coating Systems Ltd
Deburring Machines
Ecoclean UK (SBS Ecoclean
Group)
Kemet International Ltd
RJH Finishing Systems Ltd
Sharmic Engineering Ltd
Tregarne
Deburring Service
Sharmic Engineering Ltd
Decorative Paint Finishes
Applied Coating Technologies
Hart Materials
PI-KEM Ltd
Powdertech (Corby) Ltd
Degreasing & Cleaning
Materials
AGMA Ltd
Degreasing & Cleaning Plant
D&S Ultra-Clean Ltd
MecWash Systems Ltd
Newsmith Stainless Ltd
Turbex Ltd
Wire Mesh Fabrications
Degreasing & Cleaning
Solvent
Enviro Tech (Europe) Ltd
Geiss UK Ltd
Delta Tone Coaters
The Electrolytic Plating Co. Ltd
De-Nibbing
Quickwood U.K.
Diaphragm Paint Pumps
AE Industrial & Air Equipment Ltd
SAMES KREMLIN
SERFILCO International Ltd
Drum Pumps
BRAUDE a trading division of
Heatrod Elements Ltd
SERFILCO International Ltd
Siebec UK Ltd
Dry Film Lubricants (Inc.
PTFE) Coating
Ashton and Moore Ltd
The Electrolytic Plating Co. Ltd
Firma-Chrome Ltd
Graphite Services Company
Hi-Tek Products Ltd
Polymer Coating Solutions Ltd
Surface Technology
Dry Filter & Combination
Spraybooth/Ovens
AE Industrial & Air Equipment
Ltd
Total Coating Systems Ltd
Dry Lubricant Coatings
Metal Improvement Company
(CWST)
Dryers
Air Control Industries Ltd
Drying (Combined Vac/Hot
Air)
Secomak Ltd
Finishing Industries Yearbook – 2022 edition

HoldTight 102 - Half Page Advert.qxp_HoldTight 102 Half Page Ad 07/07/2017 12:05 Page 1
HoldTight 102 ® is a wet blasting
additive that removes ALL salts,
acids, abrasives and greases,
PLUS it prevents flash rust for
up to 72 hours!
Suitable for a variety of industries:
MARINE l INDUSTRIAL
OFFSHORE l INFRASTRUCTURE
With over 85 years in the Corrosion Prevention Industry,
Winn & Coales (Denso) Ltd. have been long time suppliers of
the ultimate surface preparation solution. To extend the service
life of your coating, contact a Denso representative now!
LEADERS IN CORROSION PREVENTION
& SEALING TECHNOLOGY
Sole Distributor in the United Kingdom:
Winn & Coales (Denso) Ltd
Tel: 0208 670 7511 l Web: www.denso.net
A MEMBER OF WINN & COALES INTERNATIONAL

36 BUYERS GUIDE
Drying Racks
Gibbs - Sandtech Ltd
Duct Work
Haviland Ltd
Electro Plating Services
(cont.)
Moss Metal Finishing Ltd
Nuns Street Plating Ltd
Electroplating; Plating
Chemicals (cont.)
Filters - Anodising
Materials/Chemicals
Almetron Ltd
Hendor-pe UK Ltd
Siebec UK Ltd
Dust Collectors
Airbench Ltd
Camfil Ltd
Dust Extraction Systems
AE Industrial & Air Equipment Ltd
C-Air Filtration Ltd
Durnbury Ltd
Haviland Ltd
Eductor Nozzles
BRAUDE a trading division of
Heatrod Elements Ltd
Jacquet Weston Engineering
Nu-Pro Limited
Phoenix Electroplating Ltd
Quality Plated Products
Ltd
Silchrome Plating Ltd
Swinton Electro Plating Ltd
Twickenham Plating Group
Ltd
Schloetter Co Ltd
Umicore Galvanotechnik GmbH
Electropolishing Chemistry
and Plant
Anopol Ltd
Kemet International Ltd
Electropolishing Service
Ashton and Moore Ltd
Firma-Chrome Ltd
MMP Electrovibe UK Ltd
Filters - Spray Guns/Spraying
AE Industrial & Air Equipment Ltd
Air Quality Ltd
EXITFLEX supplied by Polyhose
UK Ltd
Filters for Plating Solutions
Hendor-pe UK Ltd
Jacquet Weston Engineering
Electroless Nickel Plating
Equipment
BRAUDE a trading division of
Heatrod Elements Ltd
Jacquet Weston Engineering
Electrostatic
SAMES KREMLIN
Electrostatic Flock Coating
The Flocking Shop Ltd
SERFILCO International Ltd
SERFILCO International Ltd
Siebec UK Ltd
Effluent Treatment Plants
Jacquet Weston Engineering
Lancy Technology
NHE Applied Process Technology
Siebec UK Ltd
Electro Painting
Metafin Group Holdings Ltd
SAMES KREMLIN
Electro Plating Equipment
Almetron Ltd
BRAUDE a trading division of
Heatrod Elements Ltd
Jacquet Weston Engineering
NHE Applied Process Technology
Plasticraft
SERFILCO International Ltd
Electro Plating Services
Alkemi MF Technologies Ltd
The Anochrome Group
Ashton and Moore Ltd
Cambridge Electro Plating
Ltd
Colonnade Metal Finishers
Derby Plating Services Ltd
Hockley Enterprises (Essex)
Ltd
HV Wooding Ltd
K M Finishing
Midland Polishing & Plating Ltd
Electroless Nickel Processes
Firma-Chrome Ltd
Nipro Ltd
Silchrome Plating Ltd
Surface Technology
Twickenham Plating Group
Ltd
Electroless Nickel Service
London & Brighton Plating Co.
Ltd
Electrophoretic Coating
The Anochrome Group
Hawking Electrotechnology
Ltd
LVH Coatings Ltd
Electroplate Testing
SciMed Ltd
Electroplating -
Installations/Removals
BEC Midlands Ltd
Jacquet Weston Engineering
SERFILCO International Ltd
Electroplating; Plating
Chemicals
A.M.P.E.R.E. UK Ltd
A-Gas Electronic Materials
Atotech UK Ltd
Blackfast Chemicals Ltd
Hart Materials
PI-KEM Ltd
EMC Shielding Coatings
Hart Materials
PI-KEM Ltd
Enamel Coating Equipment
GEMA Europe Srl - UK Branch
SAMES KREMLIN
Enamelling
W H Darby Ltd
Evaporation Recovery
Lancy Technology
Extraction Systems
Durnbury Ltd
Jacquet Weston Engineering
NHE Applied Process Technology
Plasticraft
Filter Cartridges
Graver Technologies
Hendor-pe UK Ltd
Jacquet Weston Engineering
SERFILCO International Ltd
Siebec UK Ltd
Filter Plant Equipment
Filtration Services Ltd
Sharmic Engineering Ltd
Filter Pumps
Jacquet Weston Engineering
SERFILCO International Ltd
Siebec UK Ltd
Siebec UK Ltd
Finishes - Electrophoretic
Blackfast Chemicals Ltd
Finishes - Electrostatic
SAMES KREMLIN
Flame Treatment
The Aerogen Company Ltd
Flock
The Flocking Shop Ltd
Qualplast (1991) Ltd
Flock Fibre Decorative
Coatings Equipment
The Flocking Shop Ltd
Maag Flock GmbH
Flow Meters for Paints,
Solvents, etc.
Litre Meter Ltd
SAMES KREMLIN
UK Flowtechnik Ltd
Finishing Industries Yearbook – 2022 edition

Celebrating more than 70 years
providing excellence in pumps
and filtration
High Quality German DC
Switch Mode Rectifiers
} DC Rectifiers
} Pulse Rectifiers
} High current rectifiers
up to 10,000A
Pumps up to 250m³/h
} Horizontal
} Magnetic Sealless
} Vertical Sealless
Filtration Systems
up to 60m³/h
} Cartridges
} Bags
} Papers
} Microfibres
For all
applications
} Electroplating
} Anodising
} Hard Chrome
} Reel-to-Reel Plating } E-Coat
For all your product finishing requirements
Hendor-pe UK Ltd, Carrington Business Park, Manchester Road, Carrington, Manchester M31 4DD
Tel: 0161 776 4331 | E: sales@hendor-pe.co.uk | W: www.Hendor-pe.co.uk
Gas Process Burners
Lanemark gas burner systems offer users reliable, high efficiency,
process heating solutions.
FD-C high turndown oven/
dryer air heating burners.
Midco HMA high efficiency,
high turndown, air replacement
or “make-up” air heating burners.
FD-GA modulating gas + air
process air heating burners.
FD-E low cost high turndown
oven/dryer air heating burners.
TX high efficiency small diameter
immersion tube tank heating
systems.
FD Series Packaged Oven/Dryer Burners
• Specifi cally designed for process air heating applications in convection
ovens and dryers
• High turndown/short flame lengths providing accurate process
temperature control
• High effi ciency gas + air modulation, gas only modulation and simple
high/low control options
• Heat Input Range: 9 kW – 1550 kW
TX Series Gas Fired Process Tank Heating Systems
• High effi ciency (80%+) heating of all types of spray and dip process tanks
• Compact high effi ciency small diameter immersion tube heat exchangers
occupying minimum tank space
• Accurate performance modelling using Lanemark TxCalc design software
• Heat Input Range: 15 kW (1½") – 1150 kW (8")
Midco HMA Series Air Replacement or “Make-Up” Air Heating Burners
• Direct fired, high effi ciency burner systems, for high volume air heating
applications such as paint spray booths, ovens and dryers.
• Supplied either as Midco burner heads for OEM system integration or
as Lanemark DB or FDB complete packaged systems including modulating
gas valve trains and controls
• Wide range of firing rates to suit alternative temperature rise and air
velocity system requirements
• DbCalc system design software
Lanemark Combustion Engineering Limited
Lanemark House, Whitacre Road, Nuneaton, Warwickshire CV11 6BW United Kingdom
Tel: +44 (0) 24 7635 2000 Fax: +44 (0) 24 7634 1166 E-mail: info@lanemark.com
www.lanemark.com
COMBUSTION ENGINEERING
X4620 Lanemark Ad SDAW.indd 1 31/08/2016 09:04

38 BUYERS GUIDE
Fume Scrubbing Plant
NHE Applied Process Technology
Plasbrun Plastics Engineering Ltd
Plasticraft
Galvanising Plant
BRAUDE a trading division of
Heatrod Elements Ltd
Zinco International Ltd
Gas Burners
Lanemark Combustion
Engineering Limited
Gas Fired Tank Heaters
Lanemark Combustion
Engineering Limited
Gas Infra-Red Ovens &
Process Heating
FIT-Infrared (EU) Ltd
Infraglo (Sheffield) Ltd
Thermo Catalytic Systems Ltd
Total Coating Systems Ltd
Gas-Fired Ovens & Dryers
Haviland Ltd
Glass Bead
Hart Materials
PI-KEM Ltd
Sharmic Engineering Ltd
Gloss Measurement
BYK-Gardner GmbH
Gold Plating
Alpha Electroplaters Ltd
PMD UK Ltd
Twickenham Plating Group Ltd
Grinding Jars (Ceramic)
PI-KEM Ltd
Grinding Products
ATA Garryson Ltd
Equip (Midlands) Ltd
Grit Blasting Equipment
The Preparation Group
Gun Cleaners
AE Industrial & Air Equipment Ltd
Brinklake Ltd
Unic International
H.V.L.P.
AE Industrial & Air Equipment Ltd
SAMES KREMLIN
Heat Exchangers
BRAUDE a trading division of
Heatrod Elements Ltd
GMF Equipment
Heat Treatment Ovens and
Furnaces
AFC-Holcroft L.L.C
Carbolite Gero
Heat Treatments (Northampton)
Ltd
PI-KEM Ltd
Tamworth Heat Treatment Ltd
Heaters, Electric Immersion
BRAUDE a trading division of
Heatrod Elements Ltd
Heaters, Electric Immersion
(cont.)
GMF Equipment
Hendor-pe UK Ltd
Jacquet Weston Engineering
SERFILCO International Ltd
STS Ltd
Heating Systems for Finishing
Plant
BRAUDE a trading division of
Heatrod Elements Ltd
GMF Equipment
Jacquet Weston Engineering
Lanemark Combustion
Engineering Limited
SAMES KREMLIN
High Voltage Test Equipment
Buckleys (UVRAL) Ltd
Hooks & Jigs
Supreme Surface Treatment
Engineering Ltd
Hoses, For Airless and
Conventional Spray
EXITFLEX supplied by Polyhose
UK Ltd
SAMES KREMLIN
Hot Dip Galvanisers
British Metal Treatments Ltd
Hereford Galvanizers Ltd
Joseph Ash Galvanizing
Humidifiers
Condair plc
HVOF Spray Coatings
Surface Technology
Impregnation Services
Surface Technology
Industrial Cleaning
Equipment
Durnbury Ltd
Ruwac USA
Infrared Heating
Equipment
Heat Infra Red Ltd
Heraeus Noblelight Ltd
Monometer Holdings Ltd
Triab/Tri Innovations AB
Internal Coating Equipment
EXITFLEX supplied by Polyhose
UK Ltd
Ion Exchange
Hendor-pe UK Ltd
Lancy Technology
SERFILCO International Ltd
Ion Plating
Hendor-pe UK Ltd
Jig Cleaning
Almetron Ltd
Jigging
Salt and Sadler Ltd
Jigs
Globemarket Ltd T/A BEMCO
Supreme Surface Treatment
Engineering Ltd
T & W Fabrications & Co
Laboratory Mills
PI-KEM Ltd
Laboratory Testing
Aerofin Laboratories Ltd
A-Gas Electronic Materials
AnchorCert Analytical
Butterworth Laboratories Ltd
Endecotts Ltd
Q-Lab Europe Ltd
SciMed Ltd
Lapping (Sub-Contract)
Kemet International Ltd
Lapping and Polishing
Compounds
Kemet International Ltd
Liquid Level Controllers
Automated Water & Effluent
Ltd
BRAUDE a trading division of
Heatrod Elements Ltd
Jacquet Weston Engineering
Lubrication Systems
Durnbury Ltd
Mighty Lube Systematic
Lubrication, Inc.
Luminescent Coatings
Hart Materials
Maintenance
BEC Midlands Ltd
Jacquet Weston Engineering
Masking Lacquers
Hi-Tek Products Ltd
Masking, Caps & Plugs
Greentree (Verton Ltd)
Finishing Industries Yearbook – 2022 edition

BUYERS GUIDE 39
Masking, Caps & Plugs (cont.)
Hi-Tek Products Ltd
Masking, Tapes, Discs &
Shapes
Circuit Component Supplies
Ltd
Hi-Tek Products Ltd
MOCAP Ltd
Müller TB Technologies AG
Polarseal Tapes and Conversions
Masks
Air Quality Ltd
Masks and Hoods (Face)
Air Quality Ltd
Materials Handling Equipment
Alwayse Engineering Ltd
L.B. Foster Automation &
Materials Handling
Stewart Gill Conveyors Ltd
Membrane Filters
Lancy Technology
Metal Finishing Plant
Jacquet Weston Engineering
Lamberts London Ltd
NHE Applied Process Technology
Plasticraft
Plastratum Ltd
Plating Equipment Ltd
SAMES KREMLIN
Sharmic Engineering Ltd
Steelstrip Services Ltd T/A
Servosteel
Metal Polishing Services
Lamberts London Ltd
MMP Electrovibe UK Ltd
Sharmic Engineering Ltd
Stainless Finishing Services Ltd
Metal Spray Coatings
M & R Coatings
Metal Spraying
Bristol Metal Spraying &
Protective Coatings Ltd
SAMES KREMLIN
Metal Wire
PI-KEM Ltd
Microscopes Optical
Image Solutions (UK) Ltd
Non Destructive Testing
Ashton and Moore Ltd
Non Destructive Testing
Equipment (NDT)
Cygnus Instruments Ltd
Fischer Instrumentation (GB) Ltd
FPI Engineering
NHE Applied Process Technology
Turbex Ltd
Wire Mesh Fabrications
Nonstick Coatings
Surface Technology
Optical Microscopes
Kemet International Ltd
Ovens & Tanks
AE Industrial & Air Equipment Ltd
Ovens, In-line Burn-off
B&M Longworth
Overhead Conveyor Systems
MCM Conveyors
Niko Ltd
Packaging Protection for
Components
Verotapes
Paint
Autocolour & Industrial Coating
Ltd
Avko Ltd
Coo-var
Dacrylate Paints Ltd
HMG Paints Ltd
Paint (cont.)
Indestructible Paint Ltd
Mipa Paints Ltd
Movac Group Ltd
NCS Colour AB
Nu-Pro Limited
Protech Chemicals Ltd
Schloetter Co Ltd
Sherwin-Williams UK Ltd
Witham Oil & Paint (Lowestoft)
Ltd
Paint Circulation
AE Industrial & Air Equipment
Ltd
SAMES KREMLIN
Paint Denaturing Chemicals
AE Industrial & Air Equipment
Ltd
Coating Technologies Ltd
Paint Finishing Coats
Fujichem Sonneborn Limited
PPG Industries (UK) Ltd, Selemix
Customer Service
Trimite Global Coatings
Paint Stripper
Coating Technologies Ltd
Paint Stripping
Material/Chemicals
Almetron Ltd
Blackfast Chemicals Ltd
Paint Stripping Systems
Guspro Inc.
Kolene Corporation
SCHWING Technologies
GmbH
Paint Testing
BYK-Gardner GmbH
Pearson Panke Ltd
Painting
Ashton and Moore Ltd
SAMES KREMLIN
Paints - Marine
Emblem Enterprises
Teal & Mackrill Ltd
Panel Spraying Equipment
AE Industrial & Air Equipment
Ltd
SAMES KREMLIN
Passivation of Stainless
Steel
Ashton and Moore Ltd
Twickenham Plating Group
Ltd
PCB Plating Jigs
Supreme Surface Treatment
Engineering Ltd
Personal Protection
Equipment
Supreme Visors Ltd
Phosphate Coating
Alkemi MF Technologies Ltd
Ashton and Moore Ltd
The Electrolytic Plating Co.
Ltd
Firma-Chrome Ltd
Surface Technology
Phosphating Materials
BC Metal Finishing Services
Ltd
Phosphating Plant
BRAUDE a trading division of
Heatrod Elements Ltd
Jacquet Weston Engineering
NHE Applied Process Technology
Plasticraft
Photochemical Machining,
Plating & Finishing
Precision Micro
Tecan Ltd
Pickling of Stainless
Steel
Ashton and Moore Ltd
Silchrome Plating Ltd
voestalpine Bohler Welding
Plastic Finishing Plant
SAMES KREMLIN
Plastic Media
Sharmic Engineering Ltd
Plastic Spraying
Plasticoat GB Ltd
Plating Bath Analysis
A-Gas Electronic Materials
SciMed Ltd
Plating Materials/
Chemicals
PMD Chemicals Ltd
Schloetter Co Ltd
Univertical LLC
Plating with Aluminium
AlumiPlate, Inc.
2022 edition – Finishing Industries Yearbook

40 BUYERS GUIDE
Platinised Titanium Anodes
CM Scientific Ltd
Plural Component Spray
Equipment
AE Industrial & Air Equipment Ltd
SAMES KREMLIN
Pneumatic Equipment
AE Industrial & Air Equipment Ltd
ATA Garryson Ltd
SAMES KREMLIN
Polishing and Linishing
Robots
Lea Manufacturing
Polishing Buffs
Lea Manufacturing
Polishing Chemical
Kemet International Ltd
Polishing Drying Media
Kemet International Ltd
Sharmic Engineering Ltd
Polishing Machines
Alvar Process Technologies Ltd
Bossi S.R.L. - Macchine Finitura
Metalli
Kemet International Ltd
PI-KEM Ltd
Sharmic Engineering Ltd
Powder Coating (cont.)
Thomas Howse Ltd
Joseph Ash Galvanizing
LBL Finishers
Powdertech (Corby) Ltd
Powdertech Surface Science
Shaw Trust Industries
Sherwin-Williams UK Ltd
Shropshire Powder Coaters
Spectrum Powder Coaters Ltd
Surface Technology
The Wheel Specialist
Trion Industries Inc.
Powder Coating Equipment
AE Industrial & Air Equipment Ltd
Bowker Machinery Ltd
GEMA Europe Srl - UK Branch
General Fabrications Corporation
Haviland Ltd
Hosokawa Micron BV
Paint Finishing Systems Ltd
SAMES KREMLIN
Powder Coatings (cont.)
Redditch Shotblasting Co.
Ltd
Sherwin-Williams UK Ltd
Thermaset Ltd
Powder Coatings - Metallic
Protech Chemicals Ltd
Powder Paint Reclamation
Sieves
GEMA Europe Srl - UK Branch
Mid-Anglia Engineering Ltd
Powder Recovery Dust
Collectors
AE Industrial & Air Equipment
Ltd
Powder Sieving Equipment
GEMA Europe Srl - UK Branch
Mid-Anglia Engineering Ltd
VORTI-SIV/MM Industries,
Inc.
Powder Spraying
SAMES KREMLIN
Powders For Electrostatic
Spray Coating
Precious Metal Chemicals and
Processes
A-Gas Electronic Materials
CM Scientific Ltd
Schloetter Co Ltd
Precious Metal Electroplating
Twickenham Plating Group
Ltd
Precious Metal Finishing
Plant
Jacquet Weston Engineering
Plasticraft
Sharmic Engineering Ltd
Precious Metal Reclamation
Phoenix County Metals
Ltd
PI-KEM Ltd
Pretreatment
Haviland Ltd
Printed Circuit Chemistry
A-Gas Electronic Materials
Schloetter Co Ltd
Programme Control
Equipment
BRAUDE a trading division of
Heatrod Elements Ltd
PI-KEM Ltd
Pulse Plating Equipment
Portable Water Quality
Monitoring
Air Quality Ltd
SciMed Ltd
Powder
PI-KEM Ltd
Protech Chemicals Ltd
Sandvik Osprey Ltd
Trident Powders Ltd
Powder Coating
Advanced Colour Coatings Ltd
Alkemi MF Technologies Ltd
Brical Finishers Ltd
CFI
Conqueror Industries Ltd
GEMA Europe Srl - UK Branch
Greaves Powder Coating Ltd
Highland Colour Coaters
Wagner Spraytech (UK) Ltd
Powder Coating Removal
Service
Powdertech (Corby) Ltd
Powder Coatings
Akzo Nobel Powder Coatings Ltd
The Anochrome Group
Axalta Coating Systems France
SAS
Axalta Powder Coating Systems
UK Ltd
Cameron Coatings Ltd
Goldburn Finishers Ltd
Griffin Enamellers Ltd
Paramount Powders (UK) Ltd
Protech Chemicals Ltd
Purpose Powder Coatings Ltd
Nylon Colours Ltd
Protech Chemicals Ltd
Powders For Flame Spray
Coating
Nylon Colours Ltd
Protech Chemicals Ltd
Powders For Fluidised Bed
Coating
Nylon Colours Ltd
Protech Chemicals Ltd
BEC Midlands Ltd
Hendor-pe UK Ltd
Jacquet Weston Engineering
Pumps
AxFlow
BEC Midlands Ltd
BRAUDE a trading division of
Heatrod Elements Ltd
CDR Pumps UK Ltd
Crest Pumps Group
GEMU Valves Ltd
Hendor-pe UK Ltd
Iwaki Pumps (UK) Ltd
Jacquet Weston Engineering
Lutz Jesco
March May Ltd
ProMinent Fluid Controls (UK)
Ltd
SAMES KREMLIN
Finishing Industries Yearbook – 2022 edition

Automated Water & Effluent Ltd have been supplying process control equipment
to the metal finishing and surface finishing industry.
We have an in-house team of qualified engineers able to design and build
control panels and process equipment specific to fit your requirements.
A wide range of our control instrumentation, dosing pumps and chemical process
equipment is available on short delivery.
CALL
TODAY ON
01785 254 597
• Custom Designed & Built Control Panels
• pH & Redox Controllers & Electrodes
• Conductivity Controllers
• Liquid Level Controllers
• Open Chanel & Magnetic Flow Meters
• Data Loggers
• Dosing Pumps & Tanks
Automated Water
& Effluent Ltd
Get in touch for a quote today!
AWE House, Antom Court, Tollgate
Industrial Estate, Stafford, ST16 3AF
awe-ltd.co.uk 01785 254 597

42 BUYERS GUIDE
Pumps (cont.)
SERFILCO International Ltd
Siebec UK Ltd
Purification of Anodising
Solutions
A-Gas Electronic Materials
Siebec UK Ltd
Purification of Chrome Plating
Solutions
Siebec UK Ltd
Salt Spray & Combined
Corrosion
Ascott Analytical Equipment Ltd
London & Brighton Plating Co.
Ltd
Service & Maintenance
FPI Engineering
Lancy Technology
NHE Applied Process Technology
Plasticraft
Premiere Servicing Ltd
Service/Repair: Powder Spray
Guns
SAMES KREMLIN
Shot Peening Equipment
Doug Booth (UK) Ltd
Shot/Laser Peening
Curtiss-Wright Surface
Technologies (CWST)
Doug Booth (UK) Ltd
Metal Improvement Company
(CWST)
Spray Airless
AE Industrial & Air Equipment Ltd
EXITFLEX supplied by Polyhose
UK Ltd
SAMES KREMLIN
Total Coating Systems Ltd
Spray Booth Filters
SPCB UK Ltd
Technicis Filtration
Spray Booth Wall Protector
Direct Tool Company Ltd
Spray Booths
AE Industrial & Air Equipment Ltd
Airflow Environmental Ltd
Burntwood Spraybooths and
Systems Ltd/Unitech
Machinery Ltd
Spray Guns/Spraying
Equipment
AE Industrial & Air Equipment Ltd
Air Quality Ltd
Anest Iwata (UK) Ltd
Aristospray UK
Charvo Ltd
EXITFLEX supplied by Polyhose
UK Ltd
Hi-Tec Spray Ltd
Industrial Spray Equipment Ltd
SAMES KREMLIN
SATA UK Ltd
Spray Direct @ Sealpump Ltd
Voltec Gun Systems Ltd
PVD Coating Systems
PI-KEM Ltd
Rectifiers
Hendor-pe UK Ltd
Jacquet Weston Engineering
Wagner Spraytech (UK) Ltd
Spray Guns/Spraying Robots
SAMES KREMLIN
Rectifiers and Rectifier
Control
American Plating Power, LLC
Dynaclean Spraybooths Ltd
Fercell Engineering Ltd
Haviland Ltd
Junair Spraybooths Ltd
Spray Nozzles & Accessories
for Cleaning Equipment
Pometon
Sandwell UK Ltd
BEC Midlands Ltd
Hendor-pe UK Ltd
Jacquet Weston Engineering
Spang Power Electronics
RFI/EMI Shielding
Hart Materials
Rinse Water Contamination
Controllers
Automated Water & Effluent Ltd
Robots
Staubli UK Ltd
Rubber Linings
Applied Rubber Linings Ltd
Salt for Salt Spray
Specialist Lab Salt Ltd
Silver Plating
Ashton and Moore Ltd
Hart Materials
Lamberts London Ltd
Surface Technology
Twickenham Plating Group Ltd
Solvent Distillers
AE Industrial & Air Equipment Ltd
Solvent Recovery Plant
Solutex Ltd
Solvents
Enviro Tech (Europe) Ltd
Gage Products UK Ltd
Spare Parts
NHE Applied Process Technology
Specialist Industrial Coatings
Applications
Spray Finishers Metalblast
Specialist Recruitment Services
Whitehall Recruitment Ltd
RDM Industrial Services Ltd
SLF Oberflachentechnik GmbH
Total Coating Systems Ltd
Spray Booths - Coatings
AE Industrial & Air Equipment
Ltd
Coating Technologies Ltd
SLF UK
Spraylat International Ltd
Spray Booths - Water-washed
AE Industrial & Air Equipment
Ltd
Spray Gun Extensions
EXITFLEX supplied by Polyhose
UK Ltd
PNR UK Ltd
Spray Nozzles & Accessories
for Phosphating
Delavan Spray Technologies
Spray Systems
AE Industrial & Air Equipment Ltd
Ridgeway Plant Co. Ltd
SAMES KREMLIN
Surface Analysis Services
SciMed Ltd
Surface Application
Dycomet UK Limited
Euro-matic UK Ltd
Müller TB Technologies AG
Nu-Pro Limited
SAMES KREMLIN
Finishing Industries Yearbook – 2022 edition

Expert Cleaning
Solutions
= Equipment +Chemistry + Support
Standard and fully bespoke
packages available
New generation chemistries
eco friendly, safe and reliable
Suitable for a variety of
applications including:
✓ Vapor degreasing
✓ 3D printing
✓ PCB cleaning
✓ Heat transfer/carrier fluids
and many more…
Precision cleaning at its best
“Components are cleaned to an
exceptionally high standard with
minimal cost and capital investment.”
The first choice in component cleaning:
– Large famous automotive manufacturer
• Proudly supporting the cleaning industry for 50 years
• Independent best-in-class solutions
• Aqueous or solvent processes
• Free audit + trial facilities
• Aerospace, automotive, medical, optics,
engineering, electronics clients…
Call 01506 443058
sales@frasertech.co.uk www.frasertech.co.uk
Component cleaning.
Effectively.

44 BUYERS GUIDE
Surface Colour Measurement
BYK-Gardner GmbH
Swabs for Covid-19 Testing
The Flocking Shop Ltd
Tack Cloths
Coating Technologies Ltd
Tank Cleaning Automatic
Spray Equipment
Lechler Ltd
Thermal Fluid Heaters
Babcock Wanson UK Ltd
Thermal Spray Coatings
Plasma Coatings Ltd
Surface Technology
Thermoplastics for Fluidised
Bed Coating
Protech Chemicals Ltd
Titanium Fabrications
Ultrasonic Cleaning
Equipment - Safe Solvents
Kemet International Ltd
Ultrasonic Degreasing &
Cleaning
Banner Chemicals Group
FinnSonic Oy
Fraser Technologies Ltd
Layton Technologies
MecWash Systems Ltd
Turbex Ltd
Water & Energy Conservation
Lhoist UK Ltd - Neutralac
Water Based Coatings
The Electrolytic Plating Co.
Ltd
Water Based Electrostatic
Spray Equipment
AE Industrial & Air Equipment
Ltd
SAMES KREMLIN
Tank Heaters (Gas Fired)
Lanemark Combustion
Engineering Limited
Tank Linings
NHE Applied Process Technology
Plasbrun Plastics Engineering Ltd
Plasticraft
Tanks
Henderson Plastics Ltd
Jacquet Weston Engineering
NHE Applied Process Technology
Plasbrun Plastics Engineering Ltd
Plasticraft
Tanks (Bund)
Plasbrun Plastics Engineering Ltd
Temperature Controllers
BEC Midlands Ltd
BRAUDE a trading division of
Heatrod Elements Ltd
Jacquet Weston Engineering
Temperature Measuring &
Recording
BYK-Gardner GmbH
PhoenixTM
Test Panels
BYK-Gardner GmbH
Pro Test Panels Ltd
Testing & Technical
Consultancy
Loughborough Surface Analysis
Ltd
LPD Lab Services Ltd
Thermal Analysis
SciMed Ltd
Globemarket Ltd T/A BEMCO
Huntingdon Fusion Techniques
Ltd
Tooling (Solid Carbide)
ATA Garryson Ltd
Transformer Rectifier
Powerstax Ltd.
Two Component Metering
Equipment
SAMES KREMLIN
Ultrasonic Cleaning
Alphasonics (UCS) Ltd
Apollo Ultrasonics
MecWash Systems Ltd
Ultrawave Ltd
Ultrasonic Cleaning
Equipment
Blue Ware Ultrasonics, Inc.
EJ Ultrasonics
Kemet International Ltd
MecWash Systems Ltd
PI-KEM Ltd
Turbex Ltd
Wire Mesh Fabrications
Used Machinery
Doug Booth (UK) Ltd
Jacquet Weston Engineering
Riley Surface World
Vacuum Pumps
BEC Midlands Ltd
Vapour Degreasing
Ashton and Moore Ltd
Enviro Tech (Europe) Ltd
Midland Deburr and Finish
Ltd
Vat Heaters
BEC Midlands Ltd
BRAUDE a trading division of
Heatrod Elements Ltd
Jacquet Weston Engineering
Vibratory Finishing
Sharmic Engineering Ltd
Vibratory Finishing
Machines
Kemet International Ltd
PDJ Vibro Ltd
Rollwasch Italiana SpA
Sharmic Engineering Ltd
Viscometer
BYK-Gardner GmbH
Vitreous Enamel Products
Ferro (Great Britain) Ltd
VOC Abatement Systems
Chemviron Carbon Ltd
Waste Disposal
Lhoist UK Ltd - Neutralac
Met-Chem, Inc.
Waste Drum Recycling
Unic International
Waste Water Neutralizer
Omex Environmental Ltd
Waste Water Treatment Plant
Lancy Technology
Lhoist UK Ltd - Neutralac
NHE Applied Process Technology
Siebec UK Ltd
Wehrle Environmental Ltd
Water Chillers
Aqua Cooling Ltd
Water Purification
Equipment
Adept Pure Water Ltd
Analytical Technical Services
H+E UK Ltd
Kinetico UK Ltd
Lancy Technology
Lhoist UK Ltd - Neutralac
Membracon (UK) Ltd
Wychwood Water Systems
Ltd
Water Quality Monitoring
Air Quality Ltd
Automated Water & Effluent
Ltd
Palintest Ltd
Partech Instruments
Wet Blasting
Vapormatt Ltd
Wood Finishing Plant
SAMES KREMLIN
X-Ray Analysis/Thickness
Testing
Fischer Instrumentation (GB)
Ltd
London & Brighton Plating Co.
Ltd
SciMed Ltd
Finishing Industries Yearbook – 2022 edition

REGIONAL SERVICE GUIDE 45
Regional Service Guide
Categorised breakdown of trade finishers, by regional area - refer to the A-Z Company Index on page 48 for full contact
details
IRELAND
Anodising, Hard
Aluminium Surface Engineering
Electroplating
Plating on Plastic
Borough Ltd
Mechanical Treatment
NORTH WEST
Warwickshire; Hereford &
Worcester; W. Midlands;
Shropshire; Staffordshire;
Derbyshire; Cheshire;
Gt. Manchester; Merseyside;
Lancashire; Cumbria
SCOTLAND
NORTH EAST
Leicestershire; Lincolnshire;
Nottinghamshire; E. Yorkshire;
S. Yorkshire; W. Yorkshire;
N. Yorkshire; Durham;
Tyne & Wear; Northumberland
Anodising, Sulphuric
Ashton and Moore Ltd
Chemical Treatment
Alocrom
Ashton and Moore Ltd
Shot Blasting
Doug Booth (UK) Ltd
Blackening & Blueing
Burnley Metal Treatments
NORTH EAST
Anodising
Anodising, Sulphuric
Firma-Chrome Ltd
Chemical Treatment
Blackening & Blueing
CBS Engineering & Heat
Treatment Ltd
Electropolishing Stainless
Steel
Firma-Chrome Ltd
Phosphating
Firma-Chrome Ltd
Electroplating
Chromium Plating
Allenchrome Electroplating
Ltd
Nottingham Platers Ltd
Electroless Plating,
Nickel
Firma-Chrome Ltd
Nickel Plating (excluding
Bright)
Nottingham Platers Ltd
Nickel Plating, Bright
Allenchrome Electroplating
Ltd
Nottingham Platers Ltd
Plating on Plastic
Borough Ltd
IRELAND
SOUTH WEST
Cornwall; Devon; Dorset;
Somerset; Wiltshire;
Gloucestershire;
Oxfordshire, Jersey,
Guernsey, Alderney, Sark
Satin/Nickel or Satin Chrome,
Plating
Nottingham Platers Ltd
Silver Plating
M.A.J. Hi-Spec Ltd
Zinc Plating
Allenchrome Electroplating Ltd
Zinc/Nickel Plating
Silchrome Plating Ltd
Mechanical Treatment
Bead Blasting
Nottingham Platers Ltd
WALES
SOUTH
WEST
NORTH
WEST
NORTH
EAST
Metal Polishing
Nottingham Platers Ltd
Stainless Finishing Services Ltd
Shot Blasting
Doug Booth (UK) Ltd
Organic Coatings
Powder Coating
Pickersgill Electro-Plating
PTFE Coatings
Firma-Chrome Ltd
Spray Painting
A.P. Metalising Ltd
NORTH WEST
Anodising
SOUTH
EAST
Anodising, Chromic
Ashton and Moore Ltd
Anodising, Colour
Ashton and Moore Ltd
Colour Anodising Ltd
SOUTH EAST
Isle of Wight;
Hampshire;
W. Sussex;
E. Susex;
Kent; Surrey;
Gt. London;
Berkshire;
Essex; Herts;
Beds; Bucks;
Suffolk; Norfolk;
Cambridgeshire;
Northamptonshire
Chromating
Ashton and Moore Ltd
Delta Tone
The Electrolytic Plating Co. Ltd
Electropolishing Stainless
Steel
Ashton and Moore Ltd
Metal Cleaning
Sharmic Engineering Ltd
Passivating
Ashton and Moore Ltd
Phosphating
Alkemi MF Technologies Ltd
Ashton and Moore Ltd
The Electrolytic Plating Co. Ltd
Stainless Steel Passivation
E. C. Williams Ltd
Consultants
Consultants, Individual
Industrial Protective Coatings Ltd
Static Coatings 2000 Ltd
Electroplating
Bronze Plating
C & E Plating Ltd
Cadmium Plating
Ashton and Moore Ltd
Chromium Plating
Birmingham Plating Co Ltd
Leonardt Ltd
Phoenix Electroplating Ltd
Satchrome Ltd
John Stokes (Hard Chrome
Plating & Grinding) Ltd
2022 edition – Finishing Industries Yearbook

46 REGIONAL SERVICE GUIDE
Copper Plating
E. C. Williams Ltd
Leonardt Ltd
Electroless Plating, Nickel
Auric Metal Finishers Ltd
Leonardt Ltd
Gold Plating
Leonardt Ltd
Indium Plating
Ashton and Moore Ltd
Lead Plating
Ashton and Moore Ltd
Nickel Plating (excluding
Bright)
Phoenix Electroplating Ltd
Nickel Plating, Bright
E. C. Williams Ltd
Leonardt Ltd
Plating on Plastic
Borough Ltd
Silver Plating
Ashton and Moore Ltd
E. C. Williams Ltd
Strip Plating
Ashton and Moore Ltd
Tin Plating
E. C. Williams Ltd
Tin Plating, Bright
E. C. Williams Ltd
Zinc Plating
A1 Plating
A. Gilligan Coatings Ltd
Alkemi MF Technologies Ltd
E. C. Williams Ltd
The Electrolytic Plating Co.
Ltd
Zinc/Nickel Alloy Plating
Century Heat Treatment &
Plating Co. Ltd
E. C. Williams Ltd
The Electrolytic Plating Co.
Ltd
Zinc/Nickel Plating
The Anochrome Group
The Electrolytic Plating Co.
Ltd
Mechanical Treatment
Barrel Polishing & Deburring
Leonardt Ltd
Sharmic Engineering Ltd
Metal Polishing
Sharmic Engineering Ltd
Shot Blasting
Ashton and Moore Ltd
Doug Booth (UK) Ltd
Vapour Degreasing
Ashton and Moore Ltd
Vibratory Polishing &
Deburring
Sharmic Engineering Ltd
Organic Coatings
Dip Painting
The Electrolytic Plating Co.
Ltd
Electrophoretic Painting
(Electropainting)
The Anochrome Group
Paint Stripping
Ashton and Moore Ltd
Plastic Coating
Ace Townsend Coaters
Powder Coating
Alkemi MF Technologies
Ltd
C&O Powder Coatings Ltd
Frederick Cooper (Birmingham)
Ltd
PTFE Coatings
The Anochrome Group
Ashton and Moore Ltd
The Electrolytic Plating Co.
Ltd
Silk Screen Printing
Butchers Printed Products
Ltd
Spray Painting
Ashton and Moore Ltd
Stove Enamelling
Ashton and Moore Ltd
Thermal Spraying
Plasma Spraying
Plasma Coatings Ltd
Thermal Spraying
Plasma Coatings Ltd
Wire Spraying
Plasma Coatings Ltd
Thermal Treatment
Carbide Coating
Techniques Surfaces (UK)
Ltd
Hardening & Tempering
Alloy Heat Treatment
Alpha-Rowen Ltd
Salt Bath Nitriding
Techniques Surfaces (UK) Ltd
Thermal Diffusion - Metal
Coating
The Anochrome Group
Zinc Flake
The Anochrome Group
The Electrolytic Plating Co.
Ltd
SCOTLAND
Chemical Treatment
Blackening & Blueing
Merlin Electro-Plating Ltd
Chromate Conversion
Merlin Electro-Plating Ltd
Stainless Steel Passivation
Merlin Electro-Plating Ltd
Electroplating
Electroless Plating, Nickel
Merlin Electro-Plating Ltd
Plating on Plastic
Borough Ltd
Silver Plating
Merlin Electro-Plating Ltd
Tin Plating
Merlin Electro-Plating Ltd
Zinc Plating
Merlin Electro-Plating Ltd
Zinc/Nickel Plating
Merlin Electro-Plating Ltd
Mechanical Treatment
Shot Blasting
Doug Booth (UK) Ltd
Organic Coatings
Powder Coating
M.S.P. (Scotland) Ltd Powder
Coating Division
PTFE Coatings
Merlin Electro-Plating Ltd
Thermal Treatment
Galvanising (including Hot
Dip)
Highland Galvanizers
SOUTH EAST
Anodising
Anodising, Chromic
Glenmore Hane
Anodising, Colour
C-Tec Ltd
Dorsetware Ltd
Metal Treatments (Portsmouth)
Ltd
Anodising, Hard
Corodine Ltd
C-Tec Ltd
Dorsetware Ltd
Glenmore Hane
London & Brighton Plating Co.
Ltd
Anodising, Sulphuric
C-Tec Ltd
Dove Anodising Ltd
London & Brighton Plating Co.
Ltd
Malden Plating Works Ltd
Chemical Treatment
Alocrom
C-Tec Ltd
Blackening & Blueing
Collins Chemical Blacking
Service
Chromate Conversion
C-Tec Ltd
London & Brighton Plating Co.
Ltd
Electropolishing Stainless
Steel
MMP Electrovibe UK
Ltd
Passivating
Powdertech Surface
Science
Phosphating
Dorsetware Ltd
Stainless Steel Passivation
C-Tec Ltd
Consultants
Testing, Research &
Developmental
Organisations
Air Quality Ltd
Innoval Technology
Ltd
Finishing Industries Yearbook – 2022 edition

REGIONAL SERVICE GUIDE 47
Electroplating
Chromium Plating
The Anochrome Group
Dorsetware Ltd
Douglas Metal Finishing Ltd
RCJ Metal Finishers
Chromium Plating Hard
G.B. Plating Ltd
Copper Plating
Dorsetware Ltd
G.B. Plating Ltd
London & Brighton Plating Co.
Ltd
Mechanical Treatment
Barrel Polishing & Deburring
C-Tec Ltd
Bead Blasting
C-Tec Ltd
Metal Polishing
Dorsetware Ltd
London & Brighton Plating Co.
Ltd
Shot Blasting
Doug Booth (UK) Ltd
Omnikote Ltd
Anodising, Colour
Dorsetware Ltd
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Anodising, Hard
Dorsetware Ltd
Glenmore Hane
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Anodising, Sulphuric
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Chemical Treatment
Zinc Plating
Dorsetware Ltd
Electroless Plating, Nickel
G.B. Plating Ltd
London & Brighton Plating Co.
Ltd
SGA Technologies Ltd
Gold Plating
BJS Company Ltd
London & Brighton Plating Co.
Ltd
SGA Technologies Ltd
Nickel Plating (excluding
Bright)
G.B. Plating Ltd
SGA Technologies Ltd
Nickel Plating, Black
G.B. Plating Ltd
Nickel Plating, Bright
Dorsetware Ltd
London & Brighton Plating Co.
Ltd
Plating on Plastic
Borough Ltd
Satin/Nickel or Satin Chrome,
Plating
Dorsetware Ltd
Vapour Degreasing
London & Brighton Plating Co.
Ltd
Vibratory Polishing &
Deburring
C-Tec Ltd
Organic Coatings
Plastic Coating
Omnikote Ltd
Powder Coating
Ascot Finishers Ltd
J. R. Bourne Engineering Ltd
Bradleys Metal Finishers
Island Powder Coating &
Electroplating Ltd
Omnikote Ltd
Powdertech Surface Science
Powder Coating on Glass
Omnikote Ltd
Silk Screen Printing
C-Tec Ltd
Spray Painting
Omnikote Ltd
Alocrom
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Chemical Milling
Tecan Ltd
Iridite
Dorsetware Ltd
Passivating
Powdertech Surface Science
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Phosphating
Dorsetware Ltd
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Electroplating
Chromium Plating
Dorsetware Ltd
Chromium Plating Hard
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Copper Plating
Dorsetware Ltd
Zinc/Nickel Plating
Nu-Pro Limited
Mechanical Treatment
Bead Blasting
QSE Metalblast Ltd
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Metal Polishing
Dorsetware Ltd
Shot Blasting
Doug Booth (UK) Ltd
Shot Peening
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Organic Coatings
Powder Coating
Powdertech Surface Science
WALES
Electroplating
Silver Plating
Lamberts London Ltd
London & Brighton Plating Co.
Ltd
SGA Technologies Ltd
Tin Plating
Dorsetware Ltd
London & Brighton Plating Co.
Ltd
SGA Technologies Ltd
Tin/Lead Plating
SGA Technologies Ltd
Zinc Plating
C-Tec Ltd
Dorsetware Ltd
London & Brighton Plating Co.
Ltd
Stove Enamelling
Omnikote Ltd
Thermal Spraying
Thermal Spraying
Omnikote Ltd
Wire Spraying
Omnikote Ltd
SOUTH WEST
Anodising
Anodising, Chromic
Glenmore Hane
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Nickel Plating (excluding
Bright)
Tewkesbury (Diamond Chrome)
Plating Co. Ltd
Nickel Plating, Bright
Dorsetware Ltd
Plating on Plastic
Borough Ltd
Satin/Nickel or Satin Chrome,
Plating
Dorsetware Ltd
Silver Plating
Dorsetware Ltd
Tin Plating
Dorsetware Ltd
Plating on Plastic
Borough Ltd
Mechanical Treatment
Shot Blasting
Doug Booth (UK) Ltd
REST OF WORLD
Electroplating
Zinc Plating
Riesmetal GmbH
Zinc/Nickel Plating
Huster Oberflachentechnik
GmbH
2022 edition – Finishing Industries Yearbook

48 A-Z COMPANY INDEX
A-Z Company Index
For details of associations for which membership is indicated, see the Associations section on page 78 of this directory.
A.F. = Aluminium Federation; G.A. = Galvanizers Association; I.M.F. = Institute of Materials Finishing; P.R.A. = Paint Research Association Ltd; S.E.A. = Surface Engineering Association
A.M.P.E.R.E. UK Ltd
Kings Court
17 School Road
Hall Green
Birmingham
B28 8JG
Tel: +44 (0) 121 244 1809
Email: sales.uk@ampere.com
Web: www.ampere.com
Contact: Mr Julien Richard
A.M.P.E.R.E. UK Ltd offers a
nationwide supply of anodes,
chemicals and accessories for the
surface treatment industry.
Warehouses located in
Birmingham.
Your One Stop Shop for
Electroplating.
A1 Plating
Unit 36 Moons Moat South
Padgets Lane
Redditch
Worcs
B98 0RB
Tel: 01527 528852
Email: office@a1-plating.co.uk
Web: www.a1-plating.co.uk
ABT Products Ltd
Ashburton Ind. Estate
Ross on Wye
Herefordshire HR9 7BW
Tel: 01989 563656
Email: info@abtproducts.com
Web: www.abtproducts.com
Ace Townsend Coaters
Two Woods Lane
Brierley Hill
W. Midlands DY5 1TA
Tel: 01384 70331
Fax: 01384 78981
Email: acenylon@aol.com
Web: www.acetownsendcoaters.
co.uk
Acton Gate Systems Ltd
Hilton Hall Business Centre
Hilton Lane
Essington
Wolverhampton
WV11 2BQ
Tel: 01902 249299
Email: info@actongate.co.uk
Web: www.actongate.co.uk
Addev Materials Aerospace
and Defence
2 Bordon Trading Estate
Old Station Way,
Bordon
Hants GU35 9HH
Tel: 01428 651246
Fax: 01428 661471
Email: sales.emea@
addevmaterials.com
Web: www.addevmaterialsaerospace.com
Adept Pure Water Ltd
36 Huxley Close
Park Farm South
Wellingborough
Northants NN8 6AB
Tel: 01933 677181
Email: enquiries@adeptpwt.co.uk
Web: www.adeptpwt.co.uk
I.M.F. Member
Advanced Colour Coatings
Ltd
Bannerley Road
Garretts Green
Birmingham
B33 0SL
Tel: 0121 789 6991
Fax: 0121 789 6992
Web: www.accoatings.co.uk
I.M.F./S.E.A. Member
Advanced NDT Ltd
Unit 4, Elgar Business Centre
Moseley Road
Hallow
Worcester
Worcs WR2 6NJ
Tel: 01905 371460
Email: sales@advanced-ndt.co.uk
Web: www.advanced-ndt.co.uk
Contact: Keith McLaughlin
AE Industrial & Air Equipment
Ltd
185-191 Chatsworth Road
Chesterfield
Derbyshire S40 2BD
Tel: 01246 274358
Fax: 01246 233810
Email: info@aeindustrial.co.uk
Web: www.aeindustrial.co.uk
Contact: Mark Burford
Aerofin Laboratories Ltd
68A Love Lane
Burnham-On-Sea
Somerset
TA8 1EY
Tel: 01278 785131
Email: info@aerofinlabs.com
Web: www.aerofinlabs.com
The Aerogen Company Ltd
Unit 3, Alton Business Centre
Omega Park
Alton
Hants GU34 2YU
Tel: 01420 83744
Fax: 01420 80032
Email: info@aerogen.co.uk
Web: www.aerogen.co.uk
A&E Systems Ltd
3 Charles Wood Road
Dereham
Norfolk NR19 1SX
Tel: 01362 694915
Fax: 01362 695350
Email: uk@ae-sys.com
Web: www.ae-sys.com
AFC-Holcroft L.L.C
49630 Pontiac Trail
Wixom
Michigan 48393
USA
Tel: +1 248 624 8191
Fax: +1 248 624 3710
Email: sales@afc-holcroft.com
Web: www.afc-holcroft.com
Contact: Sales Department
A-Gas Electronic Materials
Unit 3, iO Centre
Valley Drive
Rugby
CV21 1TW
Tel: 01788 537535
Web: www.AgasEM.com
A-Gas Electronic Materials is a
Distributor, supplying specialist
chemicals & processes to
Semiconductor, Printed Circuit
Board, Electronic/Industrial Metal
Finishing, Photovoltaic and
Advanced Packaging
Technologies.
A. Gilligan Coatings Ltd
25 Allcock Street
Bordesley
Birmingham B9 4DY
Tel: 0121 766 7666
Fax: 0121 766 7601
Email: alan@agilligan.co.uk
Web: www.agilligan.co.uk
Contact: Alan Gilligan
S.E.A. Member
AGMA Ltd
Haltwhistle
Northumberland
NE49 9HA
Tel: 01434 320598
Email: c.shield@agma.co.uk
Web: www.agma.co.uk
Contact: Andy Proud
Airbench Ltd
6b Commerce Way
Colchester
CO2 8HR
Tel: 01206 791191
Email: sales@airbench.com
Web: www.airbench.com
Airblast Eurospray
Airblast Ltd
Unit 26
King Street Ind. Estate
Langtoft
Peterborough
PE6 9NF
Tel: 01778 560650
Fax: 01778 560724
Email: info@airblast.co.uk
Web: www.airblast.co.uk
Air Control Industries Ltd
Weycroft Avenue
Millwey Rise Ind. Estate
Axminster
EX13 5HU
Tel: 01297 529242
Fax: 01297 529241
Web: www.aircontrolindustries.
com
Contact: Sales Manager
Airflow Environmental Ltd
Northern Works
Underhill Lane
Sheffield S6 1NL
Tel: 0114 232 7788
Fax: 0114 232 7799
Email: sales@airflow-group.com
Web: www.airflow-group.com
S.E.A. Member
Finishing Industries Yearbook – 2022 edition

A-Z COMPANY INDEX 49
Air Quality Ltd
No 1 The Courtyard
Dunnings Lane
Rochester
Kent
ME1 1YB
Tel: 01634 832895
Email: info@airq.co.uk
Web: www.airq.co.uk
Contact: David, Gemma or Geoff
Specialising in onsite testing of
breathing air quality &
environmental air. Our services
can help your business comply
with current air quality legislation
and can also help cure air quality
problems you may have, relating
to the quality of compressed air
and environmental air. With a
combined 35 years experience in
the field we pride ourselves on
providing an excellent level of
service throughout England,
Scotland and Wales to an
extensive customer base
comprising of both large and small
companies with many different
needs.
Akzo Nobel Powder Coatings
Ltd
Unit 5 Redwood Business Park
Oldbury Road
Smethwick
W. Midlands
B66 1NJ
Tel: 0121 555 1500
Fax: 0121 555 6708
Email: uk.marketingservices@
akzonobel.com
Web: www.interpon.co.uk
Alkemi MF Technologies Ltd
Clwyd Close
Manor Lane
Hawarden Ind. Park
Flintshire
CH5 3PZ
Tel: 01244 536299
Fax: 01244 520363
Email: joe@alkemimetalfinishing.
co.uk
Web: www.alkemimetalfinishing.
co.uk
Contact: Joe Trueman
Allenchrome Electroplating
Ltd
Lancaster Road
Pocklington Airfield Ind. Estate
Pocklington
York YO42 1NP
Tel: 01759 303788
Fax: 01759 305776
Email: sales@allenchrome.co.uk
Web: www.allenchrome.co.uk
Contact: Paul Allen
I.M.F./S.E.A. Member
Alloy Heat Treatment
Block 6, Grazebrook Ind. Park
Pear Tree Lane
Dudley
W. Midlands
DY2 0XW
Tel: 01384 456777
Email: sales@alloyheat.co.uk
Web: www.alloyheat.co.uk
Almco Inc.
507 W. Front Street
Albert Lea
MN 56007, USA
Tel: +1 507 377 2102
Fax: +1 507 377 0451
Email: almcosls@almco.com
Web: www.almco.com
Contact: Melody Munden
Almetron Ltd
24 Abenbury Way
Wrexham Ind. Estate
LL13 9UZ
Tel: 01978 660297
Fax: 01978 661104
Email: info@almetron.co.uk
Contact: Ian Rogers
Almetron, established in 1983, is
now celebrating more than 35
years providing the following
specialist products into the Metal
Finishing industry.
Aqueous cleaners/degreasers;
Metal brightening solutions;
Alkaline and acid etches,
Desmuts/deoxidisers/pickles;
Chrome and non-chrome
passivation; QUALICOAT
approved Non-Chrome
conversion coatings; Anodising
and pre-anodising products;
Phosphate and phosphate free
conversion coatings; Paint
Strippers; Specialist and bespoke
formulation; automotive and
aerospace approved systems. All
formulated and manufactured in
the UK under ISO 9001 & 14001
accreditation. Our team can offer
advice on all aspects of metal
treatments including pre-anodising
and anodising systems.
Along with testing and piloting
of pre-treatment and anodising
systems to determine suitability,
amongst the many tests we can
provide are NSS, AASS and
Humidity testing along with XRF
surface analysis and paint
adhesion testing.
Providing more for the
applicator and finisher has always
been at the forefront of our
operations.
Alpha Electroplaters Ltd
17 Woodfold
Sheffield
S3 9PE
Tel: 0114 275 6702
Web: www.alphaelectroplaters.
co.uk
Alpha-Rowen Ltd
Unit 15 Barnfield Road
Tipton
W. Midlands
DY4 9DF
Tel: 0121 557 6175
Fax: 0121 557 0961
Email: mike.leach@alpharowen.
co.uk
Web: www.alpharowen.co.uk
S.E.A. Member
Alphasonics (UCS) Ltd
18 Caddick Road
Knowsley Ind. Park (South)
Knowsley
Merseyside
L34 9HP
Tel: 0151 547 3777
Web: www.alphasonics.co.uk
Aluminium Surface
Engineering
Bodmin Road
Wyken
Coventry
CV2 5DX
Tel: 024 7661 1921
Fax: 024 7660 2196
Email: admin@ase4anodising.
co.uk
Web: www.ase4anodising.co.uk
AlumiPlate, Inc.
8960 Springbrook Dr.
Suite 105
Minneapolis
MN 55433
USA
Tel: +1 763 786 3788
Web: www.alumiplate.com
Alvar Process Technologies
Ltd
18 Brindley Road
Hinckley
LE10 3BY
Tel: 07775 928638
Email: info@alvarus.com
Web: www.alvarus.com
Alwayse Engineering Ltd
Miller Street
Aston
Birmingham
B6 4NF
Tel: 0121 380 4700
Fax: 0121 380 4701
Email: sales@alwayse.co.uk
Web: www.alwayse.com
ALW Group (UK) Ltd
Plot 8, Tweedale North Road
Madeley
Telford
Shropshire
TF7 4JR
Tel: 01952 684100
Fax: 01952 581611
Email: contact@alwgroup.co.uk
Web: www.alwgroup.co.uk
Amber Industries Ltd - MCM
Conveyors
Amber House
Crompton Street
Chadderton
Oldham
OL9 9AA
Tel: 0161 284 2222
Fax: 0161 627 0075
Email: sales@amber-industries.
ltd.uk
Web: www.amber-industries.ltd.uk
Contact: Mark Adams
American Plating Power,
LLC
2176 Andrea Lane
Fort Myers
FL 33912
USA
Tel: +1 239 275 5877
Fax: +1 239 275 4959
Email: sales@americanplating
power.com
Web: www.americanplating
power.com
Contact: Waasy Boddison
Analytical Technical Services
Suite 9/10
33a High Street
Heathfield
E. Sussex
TN21 8HU
Tel: 01435 862676
Email: info@atserve.co.uk
Web: www.atserve.co.uk
Contact: Barry Hart
Tim Hart
AnchorCert Analytical
1 Moreton Street
Birmingham
B1 3AX
Tel: 0121 236 6951
Web: www.anchorcertanalytical.
com
Anest Iwata (UK) Ltd
7 Chester Road
Colmworth Business Park
Eaton Socon
St. Neots
Cambs
PE19 8YT
Tel: 01480 405419
Web: www.anest-iwata.co.uk
2022 edition – Finishing Industries Yearbook

50 A-Z COMPANY INDEX
The Anochrome Group
Wood Lane
Fordhouses
Wolverhampton
WV10 8HN
Tel: 01902 397333
Email: enquiries@anochromegroup.co.uk
Web: www.anochrome.co.uk
Contact: Robert Evans-Meese
I.M.F. Member
Anochrome Technologies Ltd
provides a comprehensive source
of specialised coating, including
hard anodising, aluminium
passivation, Zinc flake corrosion
protection, solid film lubricants,
decorative coatings, all types of
powder coating and thermal
diffusion, in large and small batch
quantities to many major
automotive, rail industrial fastener,
Electronic and Offshore suppliers
and manufacturers.
Anodisers Runcorn Ltd
121 Percival Lane
Runcorn
Cheshire WA7 4UY
Tel: 01928 574681
Web: www.anodisersruncorn.
co.uk
S.E.A. Member
Anopol (South) Ltd
Old Station Way
Bordon Trading Estate
Bordon, Hants GU35 9HH
Tel: 01420 488753
Fax: 01420 488239
Email: info@anopolsouth.com
Web: www.anopol.com
S.E.A. Member
Anopol Ltd
70 Bordesley Street
Birmingham B5 5QA
Tel: 0121 632 6888
Fax: 0121 631 2274
Email: info@anopol.com
Web: www.anopol.com
I.M.F./S.E.A. Member
Apex Fluid Engineering Ltd
(Apex Pumps)
Unit 4 Morley Road
BS16 4QT
Tel: 0117 907 7555
Fax: 0117 907 7556
Email: sales@apexpumps.com
Web: www.apexpumps.com
A.P. Metalising Ltd
Dunsford Road
Meadow Lane Ind. Estate
Alfreton DE55 7RH
Tel: 01773 835398
Email: enquiries@apmetalising.
co.uk
Web: www.apmetalising.co.uk
Apollo Ultrasonics
Pond House
Bulmer Lane
Holme Upon Spalding Moor
York YO43 4HE
Tel: 01430 860049
Fax: 01430 861550
Email: sales@apolloultrasonics.
co.uk
Web: www.apolloultrasonics.co.uk
Applied Coating Technologies
Tipton Road
Oldbury
W. Midlands B69 3HY
Tel: 0121 557 5324
Email: info@applicoat.com
Web: www.applicoat.com
Applied Rubber Linings Ltd
Unit 6, Chancel Close
Eastern Avenue
Gloucester GL4 3SN
Tel: 01452 381849
Email: keith@applied-rubber.
co.uk
Web: www.applied-rubber.co.uk
Contact: Keith Travell
Aqua Cooling Ltd
Unit D4
Segensworth Business Centre
Segensworth Road
Fareham
Hants PO15 5RQ
Tel: 0333 004 4433
Email: sales@aquacooling.co.uk
Web: www.aquacooling.co.uk
Aqua Industrial Coatings Ltd
Unit 16C Whitebridge Ind. Estste
Whitebridge Lane
Stone
Staffs ST15 8LQ
Tel: 07966 770217
Email: mproctor@aquaindustrial
coatings.co.uk
Web: www.aquaindustrialcoatings.
co.uk
Contact: Martyn Proctor
Aristospray UK
2B Stephenstown Ind. Park
Balbriggan
Co. Dublin
Ireland
Tel: +353 1690 3162
Email: sales@aristospray.com
Web: www.aristospray.com
Armack Chemicals Ltd
52 & 53 Brook Street
(off Balds Lane)
Lye
W. Midlands DY9 8SL
Tel: 01384 897531
Fax: 01384 897532
Email: enquiries@armack.co.uk
Web: www.armack.co.uk
Ascot Finishers Ltd
6, David Road
Poyle Trading Estate
Colnbrook
Slough
SL3 0DG
Tel: 01753 682416
Fax: 01753 680493
Email: info@ascotfinishers.co.uk
Ascott Analytical Equipment
Ltd
6-8 Gerard
Lichfield Road Ind. Estate
Tamworth
Staffs B79 7UW
Tel: 01827 318040
Fax: 01827 318049
Email: sales@ascott-analytical.com
Web: www.ascott-analytical.com
Ashton and Moore Ltd
12 Smith Street
Hockley
Birmingham
W. Midlands
B19 3EX
Tel: 08456 188196
Fax: 08456 188197
Email: contact@ashton-moore.
co.uk
Web: www.ashton-moore.co.uk
Contact: Keith Tucker
I.M.F./S.E.A. Member
ATA Garryson Ltd
Spring Road
Ibstock
Leicestershire
LE67 6LR
Tel: 01530 261145
Email: sales@atagarryson.com
Web: www.atagroup.co
Atlas Copco Compressors Ltd
Swallowdale Lane
Hemel Hempstead
Herts HP2 7EA
Tel: 0845 601 0001
Web: https://www.atlascopco.
com/en-uk
Atotech UK Ltd
William Street
West Bromwich
W. Midlands B70 0BE
Tel: 0121 606 7777
Fax: 0121 606 7200
Email: sales.uk@atotech.com
Web: www.atotech.com
Contact: Russell Gregory
I.M.F./S.E.A. Member
Auric Metal Finishers Ltd
14 Herald Way
Binley Ind. Estate
Coventry CV3 2RP
Tel: 024 7644 7431
Email: info@auric.co.uk
Web: www.auric.co.uk
Autocolour & Industrial
Coating Ltd
Swan House
58 Hartshill Road
Stoke on Trent ST4 7RB
Tel: 01782 747100
Email: info@coatit.co.uk
Web: www.coatit.co.uk
Autoglym
Works Road
Letchworth
Herts SG6 1LU
Tel: 01462 677766
Fax: 01462 677712
Email: info@autoglym.com
Web: www.autoglym.com
Automated Water & Effluent
Ltd
AWE House, Antom Court
Tollgate Drive
Beaconside
Stafford ST16 3AF
Tel: 01785 254597
Fax: 01785 257724
Email: sales@awe-ltd.co.uk
Web: www.awe-ltd.co.uk
Automation Solutions Ltd
Units 19-22
Goldsworth Road Ind. Estate
Goldsworth Road
Woking
Surrey GU21 6LY
Tel: 01483 773444
Fax: 01483 726220
Email: sales@automationsolutions
limited.co.uk
Web: www.automationsolutions
limited.co.uk
Contact: Vince Buttaci
Avko Ltd
Hamble Court Business Park
Hamble Lane
Hamble SO31 4QJ
Tel: 023 8045 5855
Web: www.avko.co.uk
Finishing Industries Yearbook – 2022 edition

A-Z COMPANY INDEX 51
Axalta Coating Systems
France SAS
108 Impasse de la Croix
Meyssant - BP 33
42601 Montbrison Cedex
France
Tel: +33 4 77 96 70 00
Fax: +33 4 77 96 70 10
Email: alesta-info@axalta.com
Web: www.powder.axalta.com
Contact: Liliane Durris
Axalta Powder Coating
Systems UK Ltd
Whessoe Road
Darlington DL3 0XH
Tel: 01325 347000
Email: powdersales@axaltacs.com
Web: www.powder.axaltacs.com
AxFlow
820 Yeovil Road
Slough Trading Estate SL1 4JA
Tel: 01753 255600
Email: info@axflow.co.uk
Web: www.axflow.co.uk
Babcock Wanson UK Ltd
7 Elstree Way
Borehamwood
Herts WD6 1SA
Tel: 020 8953 7111
Fax: 020 8207 5177
Email: info@babcock-wanson.
co.uk
Web: www.babcock-wanson.co.uk
Contact: Etienne Fourie
Badger Anodising
(Birmingham) Ltd
42-50 Bissell Street
Highgate
Birmingham B5 7HP
Tel: 0121 622 1850
Fax: 0121 622 4265
Email: sales@badgeranodising.
co.uk
Web: www.badgeranodising.co.uk
S.E.A. Member
Baker Engineering Company
Unit 11, Paramount Ind. Estate
Sandown Road
Watford
Herts WD24 7XA
Tel: 01923 229309
Fax: 01923 801182
Web: www.bakereng.co.uk
S.E.A. Member
Banner Chemicals Group
2M House
Sutton Quays Business Park
Clifton Road
Sutton Weaver
Runcorn WA7 3EH
Tel: 01928 597000
Web: www.bannerchemicals.com
Barley Chalu Ltd
Ayton Road, Wymondham
Norfolk NR18 0QH
Tel: 01953 602771
Email: sales@barleychalu.co.uk
Web: www.barleychalu.co.uk
BC Metal Finishing Services
Ltd
7 Ravenswood Drive, Heaton
Bolton BL1 5AJ
Tel: 01204 495818
Email: david@bcmetalfinishing.
co.uk
Web: www.bcmetalfinishing.co.uk
Contact: David Carroll
Bea Finishing
1 Sullivan Crescent
Harefield
Middx UB9 6NL
Tel: 01895 477769
Email: beafinish2009@gmail.com
BEC Midlands Ltd
Unit 26
Darlaston Central Trading Estate
Salisbury Street, Darlaston
Walsall WS10 8XB
Tel: 0121 526 6847
Fax: 0121 568 8161
Email: sales@britishelectrical.co.uk
Web: www.britishelectrical.co.uk
Contact: Mr M. Rafiq
BEC Midlands Ltd is an Industrial
and Commercial repair company
that has been established for over
20 years. Based in the West
Midlands we supply and repair
most types of metal finishing plant
and equipment, electrical motors,
gearboxes, and generators.
Installations and breakdowns also
form part of our business.
BEP Surface Technologies Ltd
Eton Hill Road, Radcliffe
Manchester M26 2XT
Tel: 0161 724 9090
Fax: 0161 725 9539
Web: www.bep-st.com
S.E.A. Member
Bettablast Blasting Services
Units 2&3, Algernon Ind. Estate
Shiremoor
Newcastle Upon Tyne
NE27 0NB
Tel: 0191 251 8575
Email: bettablast@aol.com
Web: www.bettablast.co.uk
DALIC SELECTIVE
ELECTROPLATING
ADDEV MATERIALS IS THE UK OUTLET
FOR ALL DALIC ELECTROPLATING
MATERIALS AND SERVICES
All the required consumables including
anodes and bonnets plus training courses and
technical services. Dalic’s unrivalled application
systems including rectifiers and the patented
“closed loop” Dalistick Station for full control
of the application and no exposure to
hazardous metals.
BRUSH PLATING SOLUTIONS
Anodising
Cadmium, Cobalt,Zinc, Nickel
Copper, Tin, Gold, Silver
ADDEV MATERIALS AEROSPACE
2 Bordon Trading Estate Old Station Way, Bordon, Hampshire GU35 9HH
T. +44 (0) 1428 651246 F. +44 (0)1428 661471
aerospace.emea@addevmaterials.com
www.addevmaterials-aerospace.com
pexa_quarter page.indd 1 05/11/2020 11:23
ADAPTABLE SOLUTION CHEMISTRY
Spray • Immersion • Cascade • Anodising
Aerospace Q Automotive • Architectural
Consultancy • Support • Service
APPROVED CHROME FREE AND
PHOSPHATE FREE TECHNOLOGIES
SurePrep ® SureBond ®
Sure ® Fast
PROVIDING SOLUTIONS FOR
SURFACE PREPARATION . PASSIVATION
PROTECTION . DEGREASING
ETCHING . DEOXIDISING . ANODISING
+44 (0) 1978 660297 • info@almetron.co.uk • almetron.co.uk
2022 edition – Finishing Industries Yearbook
almertron_quarter page_yb2022.indd 1 15/10/2021 16:25

52 A-Z COMPANY INDEX
Birmingham Plating Co Ltd
145-152 Lewisham Road
Smethwick
W. Midlands B66 2ER
Tel: 0121 558 2341
Fax: 0121 558 3923
Email: sales@birmingham-plating.
co.uk
Web: www.birmingham-plating.
co.uk
Contact: Avtar Gakhal
S.E.A. Member
BJS Company Ltd
65 Bideford Avenue
Perivale, Greenford
Middx UB6 7PP
Tel: 020 8810 5779
Email: info@bjsco.com
Web: www.bjsco.com
I.M.F. Member
Blackfast Chemicals Ltd
Unit 5 Russell House
Molesey Road
Walton-on-Thames
Surrey KT12 3PE
Tel: 020 8339 7370
Fax: 020 8339 7371
Email: sales@blackfast.com
Web: www.blackfast.com
Contact: Jeanet Ostergaard
Blue Ware Ultrasonics, Inc.
960 S. Rolff St., Davenport
IA 52802, USA
Tel: +1 563 322 0144
Fax: +1 563 322 7180
Web: www.bluewaveinc.com
Borer Chemie AG
Gewerbestrasse 13
CH-4528 Zuchwil
Switzerland
Tel: +41 32 686 56 00
Fax: +41 32 686 56 90
Email: office@borer.ch
Web: www.borer.ch
Borough Ltd
65 Progress Road
Leigh on Sea, Essex SS9 5JT
Tel: 01702 425425
Fax: 01702 425401
Email: davidb@borough.co.uk
Web: www.borough.co.uk
Contact: David Brereton
Bossi S.R.L. - Macchine
Finitura Metalli
Via Dante 63
20081 Abbiategrasso (MI)
Italy
Tel: +39 02 94964141
Fax: +39 02 9466265
Email: info@bossi-srl.com
Web: www.bossi-srl.com
Contact: Mr Massimo Maestri
J. R. Bourne Engineering Ltd
Forrester Park Works
Beckingham Road
Great Totham
Maldon
Essex CM9 8EA
Tel: 01621 892972
Fax: 01621 893299
Email: chris@jrbourne.com
Web: www.jrbourne.com
Contact: Chris Bourne
Bowker Machinery Ltd
Unit 29,
Dinting Vale Business Park
Dinting Vale
Glossop
High Peak
SK13 6LG
Tel: 01457 868888
Web: www.ukpowdercoating.com
Bradleys Metal Finishers
49 Knightsdale Road
Ipswich
Suffolk
IP1 4JJ
Tel: 01473 461400
Email: mail@bradleys-uk.com
Web: www.bradleysmetalfinishers.
com
BRAUDE a trading division of
Heatrod Elements Ltd
Unit 5, Wellington Business Park
Dukes Ride
Crowthorne
RG45 6LS
Tel: 01252 876123
Email: sales@braude.co.uk
Web: www.braude.co.uk
Contact: Lorraine Benjamin
I.M.F./S.E.A. Member
BRAUDE are the leading UK
Thermal Process Equipment
Specialists who provide complete
solutions for all tanks and
processes. Our products are all
ISO 9001:2015 approved using
high integrity fluoropolymers. The
range includes: POLARIS electric
immersion heaters, NAUTILUS
tank heaters & coolers,
ELECTROJET and JET STREAM
external systems, TEMPERATURE
& LEVEL CONTROLLERS,
CHEMICAL PUMPS,
FROGSPAWN and CONTROL
PANELS as well as TITANIUM &
STAINLESS STEEL ROD &
CERAMIC heaters. We also make
bespoke PROCESS & STORAGE
TANKS in PP, PVC and PVDF.
Brical Finishers Ltd
Bay 5,
38 Bayton Road Ind. Estate
CV7 9EJ
Tel: 024 7636 2032
Brinklake Ltd
Unit 15 Wingbury Courtyard
Leighton Road
Wingrave
Bucks HP22 4LW
Tel: 0843 515 3833
Email: sales@brinklake.co.uk
Web: www.brinklake.co.uk
Brinklake offer a wide range of
body shop equipment from paint
gun cleaners via mobile paint
dryers to our energy saving
compressed air heaters and many
other products. If you’re looking to
save money and improve
productivity, then look no further.
Contact us today with any enquiry
you may have!
Bristol Metal Spraying &
Protective Coatings Ltd
Payne’s Shipyard
Coronation Road
Bristol BS3 1RP
Tel: 0117 966 2206
Fax: 0117 966 1155
Email: sales@bmspc.co.uk
Web: www.bmspc.co.uk
Contact: Debra Nelmes
British Metal Treatments Ltd
40 Battery Road
Great Yarmouth NR30 3NN
Tel: 01493 844153
Fax: 01493 330303
Email: sales@bmtgalv.co.uk
Web: www.bmtgalv.co.uk
I.M.F. Member
Martin Brown Paints Ltd
265-267 Dickson Road
Blackpool
Lancs FY1 2JJ
Tel: 01253 626907
Fax: 01253 753494
Email: sales@martinbrownpaints.
com
Web: www.martinbrownpaints.net
G.A. Member
Buckleys (UVRAL) Ltd
Buckleys House
Unit G, Concept Court
Shearway Road
Shearway Business Park
Folkestone, Kent CT19 4RG
Tel: 01303 278888
Fax: 01303 274331
Email: sales@buckleys.co.uk
Web: www.buckleysinternational.
com
Contact: Sales Team
Burnley Metal Treatments
Unit 16 Balderstone Close
Heasandford Ind. Estate
Burnley
Lancs BB10 2TA
Tel: 01282 830221
Email: glenn.dickinson@
btconnect.com
Contact: Glenn Dickinson
Burntwood Spraybooths and
Systems Ltd/Unitech
Machinery Ltd
Unitech House
Prospect Road
Burntwood
Staffs WS7 0AL
Tel: 01543 685565
Email: spraybooths@unitech.uk.
com
Web: www.burntwoodspray
booths.co.uk
www.unitechmachinery.co.uk
Butchers Printed Products Ltd
8 Upper Crossgate Road
Park Farm Ind. Estate
Redditch
Worcs B98 7SR
Tel: 01527 910178
Fax: 01527 524360
Email: sales@bppdigital.co.uk
Web: www.bppdigital.co.uk
Contact: Matthew Elmes
Butterworth Laboratories Ltd
54-56 Waldegrave Road
Teddington TW11 8NY
Tel: 020 8977 0750
Fax: 020 8943 2624
Email: info@butterworth-labs.
co.uk
Web: www.butterworth-labs.co.uk
BYK-Gardner GmbH
Lausitzer Strasse 8
82538 Geretsried
Germany
Tel: +49 8171 3493-0
Fax: +49 8171 3493-140
Email: info.byk.gardner@altana.
com
Web: www.byk-instruments.com
C-Air Filtration Ltd
1 Holcroft Place
Lytham
Lancs
FY8 4PW
Tel: 01706 220373
Email: info@c-airfiltration.co.uk
Web: www.c-airfiltration.co.uk
Contact: C. Blakeley
Finishing Industries Yearbook – 2022 edition

spectro2guide Pro
Let’s light up the darkest black
Black is still one of the most popular and at the same time the most difficult “color” for quality control. Why
is it such a challenge to obtain meaningful values that are reliable and repeatable? Black is described visually
by its depth and colored undertone being “bluish or brownish”. As hardly any light is reflected the technical
performance of a spectrophotometer is pushed to its extreme limits.
spectro2guide Pro sets a new standard for the measurement of BLACK: LEDs are powered with more energy
for a longer time and at the same time this high energy mode needs to be internally controlled to deliver a
perfectly stable signal with the highest possible accuracy.
www.byk-instruments.com

54 A-Z COMPANY INDEX
CALDAN Conveyors Ltd
209 The Innovation Centre
Vienna Court
Kirkleatham Business Park
Redcar TS10 5SH
Tel: 01642 271118
Email: salesuk@caldan.dk
Web: www.caldan.dk
Caldic UK Ltd
Stainsby Close
Holmewood Ind. Estate
Chesterfield
Derbyshire
S42 5UG
Tel: 01246 854111
Email: sales.uk@caldic.com
Web: www.caldic.com
Cambridge Electro Plating Ltd
21-25 Union Lane
Cambridge CB4 1PR
Tel: 01223 352464
Fax: 01223 361085
Email: c.e.p@cambridgeelectro
plating.co.uk
Contact: K. L. Jones
Camcoat Performance
Coatings Ltd
129 Hoyle Street
Bewsey Ind. Estate
Warrington
Cheshire WA5 0LP
Tel: 01925 445003
Email: info@camcoat.com
Web: www.camcoat.com
Cameron Coatings Ltd
18 Forest Vale Road
Cinderford
Glos. GL14 2PH
Tel: 01594 826088
Web: www.holscot.com
Camfil Ltd
Knowsley Road
Haslingden
Lancs BB4 4EG
Tel: 01706 238000
Fax: 01706 226736
Email: uk.filtersales@camfil.com
Web: www.camfilapc.com
Contact: Anne Dempsey
I.M.F. Member
Cannock Chemicals Ltd
North Street Ind. Estate
North Street
Bridgtown
Cannock
WS11 0AZ
Tel: 01543 505771/571762
Fax: 01543 466011
Email: mark.malpass@cannock
chemicals.com
Contact: Mark Malpass
S.E.A. Member
Carbolite Gero
Parsons Lane
Hope
Derbyshire S33 6RB
Tel: 01433 620011
Email: info@carbolite-gero.com
Web: www.carbolite-gero.com
Contact: Tom Gould
CBI Equipment Ltd
Unit 5 Tyneham Close
Wareham
BH20 7BE
Tel: 01929 550669
Web: www.cbiequipment.co.uk
CBS Engineering & Heat
Treatment Ltd
Acton Grove
Long Eaton
Nottingham NG10 1FY
Tel: 0115 946 0011
Email: sales@cbsengineeringuk.
co.uk
Web: www.cbsengineeringuk.
co.uk
Contact: Simon Tye
CDR Pumps UK Ltd
3 Morris Close
Park Farm Ind. Estate
Wellingborough
Northants
NN8 6XF
Tel: 01933 674777
Email: sales@cdrpumps.co.uk
Web: www.cdrpumps.co.uk
Century Heat Treatment &
Plating Co. Ltd
121 Kings Road
Tyseley
Birmingham
B11 2AR
Tel: 0121 706 5525
Fax: 0121 707 7718
Email: sales@centuryhtp.co.uk
Web: www.centuryhtp.co.uk
Contact: Mr R. Lilly
C & E Plating Ltd
8/9 Key Hill Drive
Hockley
Birmingham B18 5NY
Tel: 0121 554 5838
Fax: 0121 554 5845
Web: www.ceplating.co.uk
Contact: Mr Stephen Hobbis
CFI
Unit 9B, Thorpe Close
Banbury
Oxon OX16 4SW
Tel: 01295 257014
Fax: 01295 272405
Email: sales@cfiswin.co.uk
Web: www.ukpowdercoating.
co.uk
Charvo Ltd
Snaygill Ind. Estate
Keighley Road
Skipton
N. Yorks
BD23 2QR
Tel: 01756 795028
Fax: 01756 798473
Web: www.charvo.co.uk
Chemetall Ltd
Napier House
Auckland Park
Bletchley
Milton Keynes
MK1 1BU
Tel: 01908 649333
Fax: 01908 373939
Email: chemetall.ukinfo@basf.
com
Web: www.chemetall.com
Contact: Wayne Brown
A.F./S.E.A. Member
Chemox Pound Ltd
Unit 1
iO Centre
Swift Valley
Rugby
CV21 1TW
Tel: 01483 450660
Email: info@chemoxpound.com
Web: www.chemoxpound.com
Chemviron Carbon Ltd
Edgar House
Lockett Road
Ashton-In-Makerfield
Lancashire
WN4 8DE
Tel: 01942 275400
Fax: 01942 275600
Email: info@chemviron.eu
Web: www.chemviron.eu
Contact: Mr N. Taylor
Circuit Component Supplies
Ltd
Unit 4, Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: 01204 460360
Fax: 01204 460053
Email: sales@ccstapes.co
Web: www.ccstapes.co.uk
Contact: John Mullins
Clayton Thermal Products Ltd
5 Boleyn Court
Manor Park
Runcorn
Cheshire
WA7 1SR
Tel: 01928 579009
Email: sales@claytonindustries.
co.uk
Web: www.claytonindustries.co.uk
Cleentek Ltd
Unit 7, Badger Way
Prenton
Wirral
CH43 3HQ
Tel: 0844 567 2950
Email: info@cleentek.co.uk
Web: www.cleentek.co.uk
CM Scientific Ltd
1 Ryefield Court
Ryefield Way
Silsden
BD20 0DL
Tel: 01535 280318
Fax: 01535 280378
Email: sales@cmscientific.com
Web: www.cmscientific.com
Contact: Peter Morrell
Coating Technologies Ltd
Unit 94
Northwick Business Centre
Blockley
Moreton-in-Marsh
Glos GL56 9RF
Tel: 01386 700884
Email: sales@coatingtechnologies.com
Web: www.coatingtechnologies.com
Collins Chemical Blacking
Service
5 & 6b Aultone Yard
Aultone Way
Carshalton
Surrey
SM5 2LH
Tel: 020 8647 3123
Email: info@collinschemical
blacking.co.uk
Web: www.collinschemical
blacking.co.uk
Colonnade Metal Finishers
41 Hallmark Ind. Estate
Fourth Way
Wembley
Middx
HA9 0LB
Tel: 020 8902 7722
Email: sales@colonnademetal.
com
Web: www.colonnademetal.com
Colour Anodising Ltd
Holland Street
Radcliffe
Manchester
M26 2RH
Tel: 0161 723 2637
Fax: 0161 725 9252
Email: andrew.buckley@
anodising.com
Web: www.anodising.com
Contact: Andrew Buckley
S.E.A. Member
Finishing Industries Yearbook – 2022 edition

PosiTector ® Inspection
Unrivaled probe interchangeability
for all of your inspection needs.
Coating Thickness Probes
n Ferrous n Non-Ferrous n Combination n Ultrasonic
Surface Profile Probes
n Depth Micrometer n Replica Tape Reader
Environmental Conditions Probes
n Integral n Cabled Magnetic Probe n Anemometer Probe
n 1/2” NPT n Infrared
Hardness Probes
n Shore n Barcol
Salt Contamination Probe
n Bresle Method
Ultrasonic Wall Thickness Probes
n Corrosion n Multiple Echo Thru-Paint n Precision
n Low Frequency n Xtreme
NEW
Design and Features
Design and Features
NEW
Customized Inspection Kits...
Build your own kit from a selection of gauge
bodies and probes to suit your needs.
Coating
Thickness
Surface
Profile
Environmental
Conditions
Hardness
Salt
Contamination
Ultrasonic
Wall Thickness
Backwards Compatibility! The redesigned PosiTector gauge body accepts ALL coating thickness
(6000/200), environmental (DPM), surface profile (SPG/RTR), salt contamination (SST), hardness
(SHD/BHI), and ultrasonic wall thickness (UTG) probes manufactured since 2012.
DFT DFT Instruments UK UK LTD LTD
16A 16A Long Long Drive, Meadway, Berkhamsted, Herts HP4 HP4 2PN 2PN
t: t: 01442 879494 f: f: 01442 879595
www.dftinstruments.co.uk e: e: sales@dftinstruments.co.uk
Proud supplier of of DeFelsko Inspection Instruments

56 A-Z COMPANY INDEX
Condair plc
Artex Avenue, Rustington
Littlehampton
W. Sussex BN16 3LN
Tel: 01903 850200
Fax: 01903 850345
Email: uk.sales@condair.com
Web: www.condair.co.uk
Contact: Dave Marshall-George
Conqueror Industries Ltd
Royston Trading Estate
Units 3, 4, 6, 7, 8 & 9
South Close
Royston SG8 5UH
Tel: 01763 249535
Email: info@c-i-ltd.co.uk
Web: www.c-i-ltd.co.uk
Coo-var
Lockwood Street
Hull HU2 0HN
Tel: 01482 328053
Email: info@coo-var.co.uk
Web: www.coo-var.co.uk
C&O Powder Coatings Ltd
1 Brindley Road
Reginald Road Ind. Estate
Sutton, St. Helens
Merseyside WA9 4HY
Tel: 01244 818776
Fax: 01744 819268
Email: tom@candocoatings.co.uk
Web: www.candocoatings.co.uk
Contact: Thomas Holmes
Corodine Ltd
Unit 2, 14 Peter Road
Lancing Business Park
Lancing
W. Sussex BN15 8TH
Tel: 01903 851075
Fax: 01903 851007
Email: david@corodine.co.uk
Web: www.corodine.co.uk
Contact: David Joiner
Crest Pumps Group
7 Queensway
Stem Lane Ind. Estate
New Milton
Hants BH25 5NN
Tel: 01425 627700
Email: info@crestpumps.co.uk
Web: www.crestpumps.co.uk
Cromadex
Unit 5
Redwood Business Park
Oldbury Road
Smethwick
W. Midlands B66 1NJ
Tel: 0121 555 1500
Fax: 0121 555 6708
Email: uk.marketingservices@
akzonobel.com
Web: www.cromadex.com
C & S Equipment Ltd
15 Wingbury Courtyard
Wingrave
Bucks HP22 4LW
Tel: 0843 504 4011
Fax: 0843 504 4012
Email: admin@candsequipment.
co.uk
Web: www.candsequipment.co.uk
Contact: Richard Melville
C-Tec Ltd
Unit 12, Chartmoor Road
Leighton Buzzard
Beds LU7 4WG
Tel: 01525 850072
Fax: 01525 853934
Email: info@c-tec-anodisers.co.uk
Web: www.c-tec-anodisers.co.uk
Contact: F. Patterson
S.E.A. Member
Curtiss-Wright Surface
Technologies (CWST)
European Corporate Office
Hambridge Lane
Newbury
Berks RG14 5TU
Tel: 01635 279621
Fax: 01635 279629
Email: eurosales@cwst.com
Web: www.cwst.co.uk
Cygnus Instruments Ltd
Cygnus House
30 Prince of Wales Road
Dorchester
Dorset DT1 1PW
Tel: 01305 265533
Fax: 01305 269960
Email: sales@cygnus-instruments.
com
Web: www.cygnus-instruments.
com
Dacrylate Paints Ltd
Lindley’s Lane
Kirkby In Ashfield
Nottinghamshire
NG17 8AL
Tel: 01623 753845
Email: enquiries@dacrylate.co.uk
Web: www.dacrylate.co.uk
The Darent Wax
Company/Wilkins Campbell
1 The Mills
Station Road
South Darenth
Kent DA4 9BD
Tel: 01322 865892
Email: mail@darentwax.com
Web: www.darentwax.com
DeFelsko Corporation
800 Proctor Ave.
Ogdensburg
New York 13669
USA
Tel: +1 315 393 4450
Fax: +1 315 393 8471
Email: techsale@defelsko.com
Web: www.defelsko.com
Delavan Spray Technologies
Gorsey Lane
Widnes
Cheshire WA8 ORJ
Tel: 0151 424 6821
Fax: 0151 495 1043
Email: sales@delavan.co.uk
Web: www.delavan.com
Derby Plating Services Ltd
148 Abbey Street
Derby
DE22 3SS
Tel: 01332 382408
Fax: 01332 382408
Email: info@derbyplating.co.uk
Web: www.derbyplating.co.uk
S.E.A. Member
DFT Instruments UK Ltd
16a Meadway
Berkhamsted
Herts HP4 2PN
Tel: 01442 879494
Fax: 01442 879595
Email: sales@dftinstruments.co.uk
Web: www.dftinstruments.co.uk
Direct Tool Company Ltd
Castlehill Business Park
Flexford Road
North Baddesley
Southampton
SO52 9DF
Tel: 023 8025 1100
Email: sales@dtc-uk.com
Web: www.dtc-uk.com
DK Holdings Ltd
Station Approach
Staplehurst
Kent
TN12 0QN
Tel: 01580 891662
Email: info@dk-holdings.co.uk
Web: www.dk-holdings.co.uk
Dorset Aluminium Products
Ltd
Units 9 & 10
Poundbury West Ind. Estate
Dorchester
Dorset
DT1 2PG
Tel: 01305 265235
Email: sales@dorsetaluminium.
com
Web: www.dorsetaluminium.com
Dorsetware Ltd
Units 1 & 2
Dawkins Road Ind. Estate
Hamworthy
Poole
Dorset
BH15 4JP
Tel: 01202 677939/677666
Email: technical@dorsetware.com
Web: www.dorsetware.com
Contact: Sales
S.E.A. Member
Doug Booth (UK) Ltd
Olympia Works
Church Street
Ossett
WF5 9DG
Tel: 01924 274887
Email: sales@dougbooth.co.uk
Web: www.dougbooth.co.uk
Douglas Metal Finishing Ltd
Unit 3b Juno Way Ind. Estate
Juno Way
Lewisham
London
SE14 5RW
Tel: 020 8692 1271
Fax: 020 8691 6232
Web: www.douglasmf.com
S.E.A. Member
Dove Anodising Ltd
14-16 Kelvin Place
Thetford
Norfolk
IP24 3RR
Tel: 01842 753908
Fax: 01842 766007
Email: doveanod@hotmail.co.uk
Web: www.doveanodising.co.uk
D&S Ultra-Clean Ltd
6 Berkeley Court
Manor Park
Runcorn
Cheshire WA7 1TQ
Tel: 01928 580460
Web: www.ds-ultra.com
Durnbury Ltd
30 First Avenue
Halstead
CO9 2EX
Tel: 01787 475351
Fax: 01787 477821
Email: info@durnbury.co.uk
Web: www.durnbury.co.uk
Contact: Gary Smith-Herzberg
Dürr Ltd
Broxell Close
Warwick CV34 5QF
Tel: 01926 418800
Fax: 01926 400679
Email: sales@durr.co.uk
Web: www.durr.com
Finishing Industries Yearbook – 2022 edition

The Power of Precision Cleaning
Supply and commissioning of ultrasonic cleaning
and vapour degreasing systems
Operating throughout the UK and Worldwide
Unbiased, personalised advice
Aqueous and solvent systems available
In-house UK-based after sales service team
Parts washing and component
cleaning specialists - helping you
optimise processes and maximise
component reliability and lifespan.
Free cleaning trials
Process review
Equipment specifications
Commissioning
Training for operators
Maintenance packages
D&S Ultra-Clean Ltd
6 Berkeley Court, Manor Park,
Runcorn, Cheshire WA7 1TQ
United Kingdom
Tel: +44 (0)1928 580460
Email: sales@ds-ultra.com
www.ds-ultra.com

58 A-Z COMPANY INDEX
Dycomet UK Limited
61 Talbot Road
Newton, Hyde
Cheshire
SK14 4EU
Tel: 0161 351 3810
Email: info@dycomet.co.uk
Web: www.dycomet.co.uk
Dynaclean Spraybooths Ltd
Unit 4 Brook Road Ind. Estate
Wimborne
Dorset
BH21 2BH
Tel: 01202 840900
Fax: 01202 889477
Email: sales@dynaclean.co.uk
Web: www.dynaclean.co.uk
Dyson Powder Coatings Ltd
14 Morris Road
Nuffield Ind. Estate
Poole
Dorset BH17 0GG
Tel: 01202 678395
Fax: 01202 678395
Email: dysonpowdercoatings@
gmail.com
Contact: Vivienne Jenkin
Ecco Finishing Supplies Ltd
6, Letitia Ind. Estate
Middlesbrough
TS5 4BE
Tel: 01642 219760
Email: info@eccofinishing
supplies.com
Web: www.eccofinishingsupplies.
com
Ecoclean UK (SBS Ecoclean
Group)
Unit 10A Alcester
Arrow Business Park
Alcester Employment Park
Arden Forest Way
Alcester,
Warwickshire
B49 6HN
Tel: 07799 346611
Email: matthew.cooper@
ecoclean-group.net
Web: www.ecoclean-group.net
Contact: Matt Cooper
E. C. Williams Ltd
17-25 Spencer Street
Birmingham
B18 6DN
Tel: 0121 236 2524
Fax: 0121 233 4931
Email: plating@ecwilliams.co.uk
Web: www.ecwilliams.co.uk
Contact: Henrik Skouby
I.M.F./S.E.A. Member
EJ Ultrasonics
Unit C4 Sapphire Court
Isidore Road
Bromsgrove B60 3FJ
Tel: 01527 831678
Email: enquiries@ejultrasonics.co.uk
Web: www.ejultrasonics.co.uk
Contact: Lee Elliot
Elcometer Ltd
Edge Lane
Manchester M43 6BU
Tel: 0161 371 6000
Fax: 0161 371 6010
Email: sales@elcometer.com
Web: www.elcometer.com
Contact: Mrs N. P. E. Sellars
The Electrolytic Plating Co.
Ltd
Crown Works
138 Wednesbury Road
Walsall, W. Midlands WS1 4JJ
Tel: 01922 627466
Email: info@epcltd.co.uk
Web: www.epcltd.co.uk
Contact: Jamie Westley
S.E.A. Member
Ellesco Ltd
Airfield Road
Christchurch BH23 3TG
Tel: 01202 499400
Email: general@ellesco.
co.uk
Web: www.ellesco.co.uk
Elmbridge UK Ltd
Unit 20
Spinnaker Road
Hempsted
Gloucester GL2 5FD
Tel: 01452 525757
Email: sales@elmbridgeuk.
com
Web: www.elmbridgeuk.com
Contact: Garth Knappett
Emblem Enterprises
Clarence Boatyard
E. Cowes
Isle Of Wight PO32 6TA
Tel: 01983 298705
Mobile: 07930 623898
Email: ed.hosford@gmail.
com
Contact: E. D. Hosford
E/M Coating Services (CWST)
Enterprise Way
Vale Park, Evesham
Worcs WR11 1GX
Tel: 01386 421444
Fax: 01386 765410
Email: emukenquiries@cwst.com
Web: www.emcoatingsuk.co.uk
Contact: Ben Hayes
S.E.A. Member
Endecotts Ltd
9 Lombard Road
London SW19 3UP
Tel: 020 8542 8121
Email: sales@endecotts.com
Web: www.endecotts.com
Whether you are looking for test
sieves, sieve shakers or sample
processing, Endecotts offers the
world s finest particle analysis
equipment. Endecotts test sieves
meet national and international
standards and are supplied to
customers around the globe
through a network of agents and
distributors.
Enviro Tech (Europe) Ltd
Aissela
46 High Street, Esher
Surrey KT10 9QY
Tel: 020 8281 6370
Fax: 020 8502 3531
Email: contact@envirotecheurope.com
Web: www.envirotech-europe.
com
Contact: Nigel Mangnall
Equip (Midlands) Ltd
Byron Street Works
Buxton
Derbyshire SK17 6NU
Tel: 01298 22233
Fax: 01298 72097
Email: info@equipmidlands.co.uk
Web: www.equipmidlands.co.uk
Euro-matic UK Ltd
71-75 Shelton Street
Covent Garden
London WC2H 9JQ
Tel: 0330 311 0003
Email: info@euro-matic.co.uk
Web: www.euro-matic.co.uk
EXITFLEX supplied by
Polyhose UK Ltd
3 Airfield Road
Airfield Ind. Estate
Christchurch
Dorset BH23 3TG
Tel: 01202 478334
Email: uk@polyhose.com
Web: www.exitflex.co.uk
Explomould Engineering
Services Ltd
Mill Lane, Arlesey
Beds SG15 6RF
Tel: 01462 730066
Email: enquiries@explomould.co.uk
Web: www.explomould.co.uk
FANUC UK Limited
Sapphire Way, Ansty
Coventry CV7 9DR
Tel: 024 76605 3000
Email: sales@fanuc.co.uk
Web: www.fanuc.eu
Fercell Engineering Ltd
Unit 1, Old Mill Lane
Aylesford, Kent ME20 7DT
Tel: 01622 791414
Email: info@fercell.com
Web: www.fercell.com
Ferro (Great Britain) Ltd
Porcelain Enamel
Nile Street, Burslem
Stoke-On-Trent, Staffs ST6 2BQ
Tel: 01782 820400
Fax: 01782 820402
Web: www.ferro.com
Filtration Services Ltd
Unit 5, Sutton Mill
Byrons Lane, Macclesfield
Cheshire SK11 7JL
Tel: 01625 616109
Email: info@filtrationservices.co.uk
Web: www.filtrationservices.co.uk
FinnSonic Oy
Parikankatu 8
FI-15170 Lahti, Finland
Tel: +358 3 883 030
Fax: +358 3 883 0330
Email: sales@finnsonic.com
Web: www.finnsonic.com
Contact: Mr Juhana Rikkinen -
Sales Manager
Firma-Chrome Ltd
Soho Works, Saxon Road
Sheffield S8 0XZ
Tel: 0114 255 4343
Fax: 0114 258 7375
Email: sales@firma-chrome.co.uk
Web: www.firma-chrome.co.uk
Contact: Phil Marsden
S.E.A. Member
Fischer Instrumentation (GB)
Ltd
12 Goodwood Road
Keytec 7 Business Park
Pershore, Worcs WR10 2JL
Tel: 01386 577370
Email: mail@fischergb.co.uk
Web: www.fischerinstrumentation.
co.uk
Contact: Claire Cave
I.M.F./S.E.A. Member
Finishing Industries Yearbook – 2022 edition

Ultrasonic Solutions for your precision cleaning needs.
Make your cleaning better.
Make your tank SONIC.
We offer a service where we can
retro-fit ultrasonic equipment to
almost any tank by making it sonic.
We supply:
Benchtop Ultrasonic cleaning tanks
Industrial Ultrasonic cleaning tanks
Retro-fit Ultrasonic equipment
Automated Ultrasonic cleaning units
Bespoke Ultrasonic cleaning solutions
Ultrasonic Submersibles and Generators
If cleaning is critical to your process contact us now:
W: www.ejultrasonics.co.uk T: 01527 831 678 E: enquiries@ejultrasonics.co.uk
DEVELOPERS AND MANUFACTURERS OF SPECIALIST
ELECTROPHORETIC COATINGS
The Hawking name has been associated with the development and marketing of specialist
electrophoretic coating systems since 1985.
Hawking Electrotechnology Ltd is at the forefront of technological advancements in this field and supplies its
products through a distribution network that extends into some 35 countries worldwide and growing.
• UV/LED Radiation cure coatings • Friction control applications • Super durable Architectural finishes
• Anti-bacterial / Anti-viral systems • Outstanding colours and effects • Unrivalled matting technology
‘If it conducts electricity we can
coat it, protect it, enhance it’
Hawking Electrotechnology Ltd
T: +44 (0) 1384 483019
sales@hawking.co.uk
www.hawking.co.uk
hawking_half page_fngyb21.indd 1 03/11/2020 14:46

60 A-Z COMPANY INDEX
FIT-Infrared (EU) Ltd
P.O. Box 383
Darlington
DL3 8ZX
Tel: 01388 777027
Email: info@fitinfrared.com
Web: www.fitinfrared.com
Contact: Don McGee
The Flocking Shop Ltd
Unit 7, Tower Ind. Estate
Tower Lane
Eastleigh
Hants SO50 6NZ
Tel: 023 8061 3700
Fax: 023 8061 3355
Email: sales@flocking.biz
Web: www.theflockingshop.co.uk
FPI Engineering
Lyons Park
Coventry CV5 9PF
Tel: 024 7625 3099
Fax: 024 7655 1402
Email: info@nhe.uk.com
Web: www.nhe.uk.com
Contact: Saad Touman, Sales
Manage
Fraser Technologies Ltd
24 Grange Road
Houstoun Ind. Estate
Livingston
West Lothian EH54 5DE
Scotland
Tel: 01506 443058
Fax: 01506 443161
Email: sales@frasertech.co.uk
Web: www.frasertech.co.uk
Fraser Technologies provides
expert advice, world-leading
chemistries and equipment
solutions for component cleaning,
electronics soldering, and heat
transfer and carrier fluids. Carefully
considering customers challenges,
Fraser Technologies helps extend
the life of existing processes and
equipment, recommends, and
installs new equipment, improves
efficiency and finds ways to
significantly reduce environmental
impact.
Frederick Cooper
(Birmingham) Ltd
44-45 Prince Albert Street
Bordesley Green
Birmingham B9 5AZ
Tel: 0121 772 4201
Fax: 0121 771 2472
Email: stevewalker@frederick
cooper.co.uk
Web: www.frederickcooper.co.uk
Contact: Steve Walker
Fujichem Sonneborn Limited
91-95 Peregrine Road
Hainault
Essex IG6 3XH
Tel: 020 8500 0251
Web: www.fcsonneborn.com
Gage Products UK Ltd
4200 Waterside
Solihull Parkway
Birmingham Business Park
Birmingham
B37 7YN
Tel: 0121 717 4740
Web: www.gageproducts.com
G.B. Plating Ltd
Units 23-25 Nobel Square
Burnt Mills Ind. Estate
Basildon
Essex SS13 1LP
Tel: 01268 727504
Fax: 01268 727524
Email: gbplatingltd@live.co.uk
Web: www.gbplating.co.uk
Contact: Shirley Hamilton
I.M.F. Member
Geiss UK Ltd
Kintrave
Meadow Court
Mollington
Chester CH1 6NR
Tel: 01244 851652
Email: info@geiss.co.uk
Web: www.geiss.co.uk
Contact: Anne Greenlees
GEMA Europe Srl - UK
Branch
Unit 20
Branksome Business Park
Bourne Valley Road
Poole
Dorset BH12 1DW
Tel: 01202 763942
Fax: 01202 784299
Email: uk.sales@gema.eu.com
Web: www.gemapowdercoating.
com
Gema, world leaders in powder
application technology provide a
comprehensive range of
equipment ranging from an
OptiFlex manual unit to a Magic
full automatic fast colour change
system, Gema has the full range
of solutions for your business
needs. Gema is renowned for its
unrivalled transfer efficiency,
application consistency and
repeatability producing the lowest
coated cost.
GEMU Valves Ltd
10 Olympic Way
Birchwood
Warrington
WA2 0YL
Tel: 01925 824044
Fax: 01925 828002
Web: www.gemu.co.uk
General Fabrications
Corporation
7777 Milan Road
Sandusky
Ohio 44870
USA
Tel: +1 419 625 6055
Email: salesi@gfcfinishing.com
Web: www.gfcfinishing.com
Contact: Jeff Boraski
G & G Powder Coatings Ltd
Unit 3
Rippleside Commercial Estate
Ripple Road
Barking
Essex IG11 0RJ
Tel: 020 8592 4555
Fax: 020 8592 4777
Email: info@ggpowder.com
Web: www.ggpowder.com
Gibbs - Sandtech Ltd
Station Road
Braughing, Ware
Herts SG11 2PB
Tel: 01920 822404
Fax: 01920 822909
Email: info@gibbsfinishing.com
Web: www.gibbsfinishing.com
Contact: Warren Gibbs
Glenmore Hane
717-719 Banbury Avenue
Slough Trading Estate
Berkshire SL1 4LR
Tel: 01753 528884
Email: info@glenmorehane.co.uk
Web: www.glenmorehane.co.uk
Globemarket Ltd
T/A BEMCO
101-102 Middlemore Ind. Estate
Middlemore Road
Smethwick
W. Midlands B66 2EP
Tel: 0121 236 5868
Fax: 0121 236 8211
Email: rjl@bemco.uk.com
Web: www.bemco.uk.com
Contact: Richard Larcombe
GMF Equipment
Barton House
Ashby Road, Kegworth
Derby DE74 2DH
Tel: 01509 673656
Fax: 01509 674729
Email: sales@gmfequipment
co.uk
shyam@gmfequipment.co.uk
Web: www.gmfequipment.co.uk
Contact: Shyam Patel
S.E.A. Member
GMF Equipment are committed
to providing the best possible
solutions for heating, cooling, and
monitoring control of fluids. We
exclusively offer products by
Mazurczak and Galvatek, market
leaders in the industry! Our
manufacturing sites use state of
the art technology, so we can
offer superior quality and still be
competitively priced!
Goldburn Finishers Ltd
Units 1 & 2
Broxhead Ind. Estate
Lindford, Bordon
Hants GU35 0JX
Tel: 01420 477696
Web: www.goldburnfinishers.
co.uk
Graphite Services Company
19-20 Station Lane Ind. Estate
Station Lane
Old Whittington
Chesterfield S41 9PX
Tel: 01246 260360
Fax: 01246 260367
Email: selwyn@graphiteservices.
co.uk
Contact: Selwyn Burchhardt
Graver Technologies
200 Lake Drive, Glasgow
DE 19702, USA
Tel: +1 302 731 1700
Fax: +1 302 369 0938
Email: info@gravertech.com
Web: www.gravertech.com
Greaves Powder Coating Ltd
16-18 Hicks Street
Sheffield
S. Yorkshire S3 8BL
Tel: 0114 276 3383
Email: info@greavespowder
coating.co.uk
Web: www.greavespowder
coating.co.uk
Finishing Industries Yearbook – 2022 edition

A-Z COMPANY INDEX 61
Greenkote Plc
27 Gloucester Place, LG
London W1U 8HU
Tel: 020 7993 9021
Email: sales.vermeulen@
greenkote.com
Web: www.greenkote.com
Greentree (Verton Ltd)
Verton House
Alexandra Way
Tewkesbury
GL20 8NB
Tel: 01684 533800
Fax: 01684 297005
Email: sales@greentree-eng.co.uk
Web: www.greentree-eng.co.uk
Contact: Tessa Abraham
Griffin Enamellers Ltd
Unit 4, Navigation Road
Worcester WR5 3DF
Tel: 01905 350511
Fax: 01905 354500
Email: griffin@intrac.co.uk
Web: www.gel-paint.co.uk
Contact: Steve Powell
Guspro Inc.
Bayco Green Cleaning Solutions
1-715 Richmond Street
Chatham
Ontario N7M 5J5
Canada
Tel: +1 888 648 7776
Fax: +1 800 667 8742
Email: guspro@guspro.com
Web: www.guspro.com
Contact: Alan Moon
Guyson International Ltd
Snaygill Ind. Estate
Keighley Road
Skipton
N. Yorks BD23 2QR
Tel: 01756 799911
Email: info@guyson.co.uk
Web: www.guyson.co.uk
Contact: Simon Bridge
Hart Materials
Unit 18-20 Magnus
Tame Valley Business Centre
Tamworth
Staffs B77 5BY
Tel: 01827 259250
Email: sales@hartmaterials.com
Web: www.hartmaterials.com
I.M.F./S.E.A. Member
Hastings Metal Finishers Ltd
Unit 8
Prince Consort Ind. Estate
Hebburn
Tyne & Wear NE31 1EH
Tel: 0191 483 9213
Email: sales@hmf-ltd.co.uk
Web: www.electroplaters.org.uk
Haviland Ltd
Merlin Way
Quarry Hill Ind. Estate
Ilkeston DE7 4RA
Tel: 0115 944 4159
Email: haviland.ltd@outlook.com
Web: www.haviland.ltd.uk
Hawking Electrotechnology
Ltd
Unit B2 The Wallows Ind. Estate
Fens Pool Avenue, Brierley Hill
W. Midlands DY5 1QA
Tel: 01384 483019
Email: sales@hawking.co.uk
Web: www.hawking.co.uk
I.M.F. Member
Heat Infra Red Ltd
6 Advance Workshops
Debdale Lane, Keyworth
Notts NG12 5HN
Tel: 0115 937 2727
Fax: 0115 937 2727
Email: ian@heatinfrared.co.uk
Web: www.heatinfrared.co.uk
Heat Treatments
(Northampton) Ltd
Sheaf Close
Lodge Farm Ind. Estate
Northampton NN5 7UL
Tel: 01604 586920
Fax: 01604 759286
Email: sales@heat-treatments.co.uk
Web: www.heat-treatments.co.uk
Henderson Plastics Ltd
Lyng Hall Road
Wood Norton
Dereham
Norfolk NR20 5BF
Tel: 01362 683364
Email: works@hendersons.co.uk
Web: www.hendersons.co.uk
Hendor-pe UK Ltd
Carrington Business Park
Manchester Road
Carrington
Manchester M31 4DD
Tel: 0161 776 4331
Email: sales@hendor-pe.co.uk
Web: www.hendor-pe.co.uk
Henkel Ltd
Wood Lane End
Hemel Hempstead HP2 4RQ
Tel: 01442 278000
Web: www.bonderite-solutions.
co.uk
Heraeus Noblelight Ltd
Unit 1 Millennium Court
Clayhill Ind. Estate
Buildwas Road
Neston
Cheshire CH64 3UZ
Tel: 0151 353 2710
Fax: 0151 353 2719
Email: ian.bartley@heraeus.com
Web: www.heraeus.com
Hereford Galvanizers Ltd
Westfields Trading Estate
Hereford
HR4 9NS
Tel: 01432 267664
Fax: 01432 352735
Email: zinc@hereford.galvanizers.
co.uk
Web: www.galvanizers.co.uk
G.A. Member
H+E UK Ltd
Field Place Estate
Broadbridge Heath
Horsham
W. Sussex RH12 3PB
Tel: 01403 272772
Email: sales@he-water.co.uk
Web: www.he-water.co.uk
Contact: Adam Martin
Highland Colour Coaters
Tower Road
Blairlinn Ind. Estate
Cumbernauld
G67 2JH
Scotland
Tel: 01236 731444
Fax: 01236 731555
Email: enquiries@higalv.co.uk
Web: www.higalv.co.uk
Contact: Geoff Crowley
G.A. Member
Highland Galvanizers
Pinefield Parade
Elgin
IV30 6FG
Scotland
Tel: 01343 548855
Fax: 01343 545551
Email: enquiries@higalv.co.uk
Web: www.higalv.co.uk
Contact: Geoff Crowley
G.A. Member
Hitachi High-Tech Analytical
Science
Windrush Court
Abingdon Business Park
Abingdon
OX14 1SY
Tel: 01235 977900
Email: contact@hitachi-hightech.
com
Web: www.hitachi-hightech.com/
hha
Hi-Tec Spray Ltd
Heronden Road
Parkwood Ind. Estate
Maidstone
Kent ME15 9YR
Tel: 01622 356590
Fax: 01622 663555
Email: sales@hitecspray.co.uk
Web: www.hitecspray.co.uk
Hi-Tek Products Ltd
Unit 1A
Dawkins Road Ind. Estate
Hamworthy
Poole
Dorset BH15 4JP
Tel: 01202 661300
Email: jane@hitekproducts.com
Web: www.hitekproducts.com
Contact: Jane McMullen
S.E.A. Member
HMG Paints Ltd
Riverside Works
Collyhurst Road
Manchester
M40 7RU
Tel: 0161 205 7631
Fax: 0161 205 8823
Email: sales@hmgpaint.com
Web: www.hmgpaint.com
Contact: Danny Cleary
HMG Paints are the UK’s largest
independent coatings
manufacturer. A diverse portfolio
of products suitable for various
industries including OEM,
Commercial, Industrial and Rail
with a full range of coatings and
colours available in wet paint,
powder coating and aerosols.
Hockley Enterprises (Essex)
Ltd
8 Grainger Road
Southend On Sea
Essex SS2 5BZ
Tel: 01702 614067
Email: info@hockleyenterprises.
co.uk
Web: www.hockleyenterprises.
co.uk
S.E.A. Member
Hodge Clemco Ltd
36 Orgreave Drive
Sheffield S13 9NR
Tel: 0114 254 8811
Fax: 0114 254 0250
Email: sales@hodgeclemco.co.uk
Web: www.hodgeclemco.co.uk
2022 edition – Finishing Industries Yearbook

62 A-Z COMPANY INDEX
Honeyglen Anodising Ltd
62, Sampson Road North
Sparkbrook
Birmingham
B11 1BG
Tel: 0121 773 6392
Email: sales@anodisers.com
Web: www.anodisers.com
S.E.A. Member
Hosokawa Micron BV
Gildenstraat 26
P.O. Box 98
7000 BL Doetinchem
The Netherlands
Tel: +31 314 373 333
Email: info@hmbv.hosokawa.com
Web: www.hosokawa-micron-bv.
com
Contact: B. Smeitink
Thomas Howse Ltd
Cakemore Road
Rowley Regis B65 0RD
Tel: 0121 559 1451
Fax: 0121 559 2722
Email: sales@howsepaints.co.uk
Web: www.howsepaints.co.uk
Contact: Sales
Huntingdon Fusion
Techniques Ltd
Stukeley Meadow
Burry Port
Carmarthenshire
SA16 0BU
Tel: 01554 836836
Fax: 01554 836837
Email: support@huntingdon
fusion.com
Web: www.huntingdonfusion.com
Huster Oberflachentechnik
GmbH
Gruendelbusch 27A
D-58099 Hagen
Germany
Tel: +49 2331 9770
Fax: +49 2331 977190
Email: info@huster-hagen.de
Web: www.huster-hagen.de
HV Wooding Ltd
Range Road Ind. Estate
Range Road
Hythe
Kent CT21 6HG
Tel: 01303 264471
Email: sales@hvwooding.co.uk
Web: www.hvwooding.co.uk
Image Solutions (UK) Ltd
2 Cable Court
Pittman Way
Fulwood PR2 9YW
Tel: 01772 663140
Email: info@imsol.co.uk
Web: www.imsol.co.uk
Indestructible Paint Ltd
16-25 Pentos Drive
Sparkhill
Birmingham B11 3TA
Tel: 0121 702 2485
Email: sales@indestructible.co.uk
Web: www.indestructible.co.uk
I.M.F. Member
Inductoheat (Tewkesbury) Ltd
Unit 23
Cotteswold Dairy Ind. Site
Northway Lane
Tewkesbury GL20 8JE
Tel: 01684 293473
Web: www.inducto-heat.co.uk
Industrial Coatings Ltd
Sandbeck Way, Wetherby
W. Yorks LS22 7DN
Tel: 01933 426225
Email: uksales@industrialcoatings
ltd.com
Web: www.industrialcoatingsltd.
com
Industrial Electric Elements
Ltd
Unit 7B Tollgate Ind. Park
Beaconside
Stafford ST16 3HS
Tel: 01785 212561
Fax: 01785 259224
Email: sales@indelecelements.co.uk
Web: www.indelecelements.co.uk
Industrial Protective Coatings
Ltd
Unit 16C Whitebridge Ind. Estate
Whiebridge Lane
Stone
Staffs ST15 8LQ
Tel: 07966 770217
Email: mproctor@industrial
protectivecoatings.co.uk
Web: www.aquaindustrialcoatings.
co.uk
Contact: Matt Proctor
Industrial Spray Equipment
Ltd
Commerce Court
Challenge Way
Bradford BD4 8NW
Tel: 01274 664668
Email: mart@sprayingequipment.
co.uk
Web: http://kremlinspray
equipment.co.uk/
Infraglo (Sheffield) Ltd
Dannemora Drive
Greenland Road Ind. Park
Sheffield S9 5DF
Tel: 0114 249 5445
Fax: 0114 249 5066
Email: info@infraglo.com
Web: www.infraglo.com
Innoval Technology Ltd
Beaumont Close
Banbury OX16 1TQ
Tel: 01295 702800
Email: enquiries@innovaltec.com
Web: www.innovaltec.com
Contact: Helen Forrest
Island Powder Coating &
Electroplating Ltd
Unit 10, Marsh Close
Sandown PO36 8EU
Isle of Wight
Tel: 01983 406688
Email: info@islandelectroplating.
co.uk
Contact: Derek Thomas
Italtecno Srl
Via Gino Marinuzzi 38
41122 Modena, Italy
Tel: +39 059 280362
Email: info@italtecno.com
Web: www.italtecno.com
Iwaki Pumps (UK) Ltd
Unit 2, Monkmoor Ind. Estate
Monkmoor Road
Shrewsbury SY2 5TX
Tel: 01743 231363
Email: info@iwakipumpsltd.co.uk
Web: www.iwakipumpsltd.co.uk
Jacquet Weston Engineering
Tower Works, Membury Airfield
Lambourn
Hungerford
Berks RG17 7TJ
Tel: 01488 674400
Email: info@jweltd.com
Web: www.jweltd.com
JWE are leading design &
manufacturers of special purpose
Process Plant and associated
machinery for the Surface
Finishing Industry. Any works we
carry out benefit from over 40
years’ experience and up-to-date
industry accreditations, quality
procedures and fully trained in
house Engineers.
JWE also stock a wide range of
Heaters, Filters, Pumps and can
provide new and used Rectifiers
for supply only or supply and install.
From a one off Service to
Manual and Automated Finishing
Lines with advanced CAD design
and visualisation - please contact
us to discuss your requirements.
JL Goslar GmbH
Im Schleeke 108
D-38640 Goslar
Germany
Tel: +49 5321 754-0
Fax: +49 5321 754 333
Web: www.jlgoslar.de
John Godrich
Unit 8
Rural Enterprise Centre
Ludlow Eco Park Road
Ludlow
Shropshire
SY8 1FF
Tel: 01584 873153
Email: enquiries@johngodrich.
co.uk
Web: www.johngodrich.co.uk
John Neale Ltd
25 Fairfield Road
Halesowen
B63 4PT
Tel: 0121 585 8793
Email: info@johnnealeltd.
co.uk
Web: www.johnnealeltd.co.uk
Joseph Ash Galvanizing
The Alcora Building 2
Mucklow Hill
Halesowen
B62 8DG
Tel: 0121 504 2560
Fax: 0121 504 2599
Email: mickj@josephash.
co.uk
Web: www.josephash.co.uk
Contact: Mick Jackson
P.R.A. Member
Junair Spraybooths Ltd
Southgate Ind. Park
Cross Street
Heywood
Lancs
OL10 1PW
Tel: 01706 363555
Fax: leon
Email: sales@junair.co.uk
Web: www.junair.co.uk
Contact: Sales Department
Keighley Laboratories
Ltd
Croft House
South Street
Keighley
W. Yorks
BD21 1EG
Tel: 01535 664211
Email: info@keighleylabs.
co.uk
Web: www.keighleylabs.
co.uk
S.E.A. Member
Finishing Industries Yearbook – 2022 edition

A-Z COMPANY INDEX 63
Keller Lufttechnik GmbH +
Co. KG
Neue Weilheimer Strasse 30
D-73230 Kirchheim unter Teck
Germany
Tel: +49 7021 574-0
Email: info@keller-lufttechnik.de
Web: www.keller-lufttechnik.de
Kemet International Ltd
Parkwood Trading Estate
Maidstone
Kent ME15 9NJ
Tel: 01622 755287
Fax: 01622 670915
Email: sales@kemet.co.uk
Web: www.kemet.co.uk
Web: www.kemet-cleaning.co.uk;
Web: www.kemet-met.co.uk
Web: www.flatlap.co.uk
Contact: Neill Swan
Specialists in precision lapping,
polishing and cleaning and ISO
9001:2015 qualified, Kemet offer
an extensive range of abrasives,
tooling and cleaning fluids
designed to optimise performance
on a comprehensive range of
equipment. With 80 years of
experience Kemet can provide a
solution to all your lapping,
polishing and cleaning challenges.
Keronite International Ltd
1 Tudor Rose Court
53 Hollands Road
Haverhill
CB9 8PJ
Tel: 01223 893222
Email: info@keronite.com
Web: www.keronite.com
Kett US
17853 Santiago Blvd
Suite 107-504
Villa Park
CA 92861
USA
Tel: +1 800 438 5388
Fax: +1 714 974 8877
Email: sales@kett.com
Web: www.kett.com
Contact: Sales Department
Kiesow Dr. Brinkmann GmbH
& Co. KG
Wittekindstr. 27-35
D-32758 Detmold
Germany
Tel: +49 5231 7604-0
Fax: +49 5231 7604-28
Email: zentrale@kiesow.org
Web: www.kiesow.org
Kimre, Inc.
744 SW 1st Street
Homestead
Florida 33030USA
Tel: +1 305 233 4249
Fax: +1 305 233 8687
Email: sales@kimre.com
Web: www.kimre.com
Kinetico UK Ltd
Bridge House
Park Gate Business Centre
Chandlers Way, Park Gate
Hants SO31 1FQ
Tel: 0800 056 86 86
Email: info@kinetico.co.uk
Web: www.kinetico.co.uk
King + Fowler U.K. Ltd
Harrison Way
Brunswick Business Park
Liverpool L3 4BG
Tel: 0151 709 8411
Fax: 0151 709 2622
Email: info@kingandfowler.com
Web: www.kingandfowler.com
S.E.A. Member
Klingspor Abrasives Ltd
Dukeries Business Centre
31-33 Retford Road
Worksop
Notts S80 2PU
Tel: 01909 712310
Fax: 01909 712420
Email: sales@klingspor.co.uk
Web: www.klingspor.co.uk
Contact: Chris Beswick
Kluthe UK Ltd
Unit 159 The Business Centre
Foxhunter Drive
Linford Wood
Milton Keynes MK14 6GD
Tel: 01908 698990
Email: Info.uk@kluthe.com
Web: www.kluthe.com
A.F./I.M.F./S.E.A. Member
K M Finishing
Unit 8 Commerce Way
Lawford Dale Ind. Estate
Manningtree
Essex CO11 1SE
Tel: 01206 396539
Email: kmfinishing@hotmail.co.uk
Web: www.kmfinishing.co.uk
Kolene Corporation
12890 Westwood Street
Detroit
MI 48223
USA
Tel: +1 313 273 9220
Fax: +1 313 273 0251
Email: hfrazer@kolene.com
Web: www.kolene.com
Contact: Ms Heidi Frazer
Lamberts London Ltd
85a Hagden Lane
Watford West Works
Watford WD18 7UA
Tel: 01923 229444
Email: enquiries@lambertslondon.
com
Web: www.lambertslondon.com
Contact: Jamie Lambert
S.E.A. Member
Award winning company Lamberts
London are world-renowned
specialists in decorative metal
finishing, plating and surface coating.
Since 1969, the expertise of our
accomplished team has become
synonymous with luxury
decorative metal plating, across a
broad range of sectors. Providing
the ultimate finishing touch for
manufacturers, completion centres
and designers.
Lancy Technology
Lyons Park
Coventry CV5 9PF
Tel: 024 7625 3099
Fax: 024 7655 1402
Email: info@nhe.uk.com
Web: www.nhe.uk.com
Contact: Saad Touman, SalesMgr
Lanemark Combustion
Engineering Limited
Lanemark House
Whitacre Road
Nuneaton CV11 6BW
Tel: 024 7635 2000
Fax: 024 7634 1166
Email: foster@lanemark.com
Web: www.lanemark.com
Contact: Jeff Foster
Layton Technologies
Parkhall Business Village
Parkhall Road, Weston Coyney
Staffs ST3 5XA
Tel: 01782 370400
Web: www.laytontechnologies.com
L.B. Foster Automation &
Materials Handling
The Midway, Lenton
Nottingham NG7 2TS
Tel: 0115 8400 500
Email: reply@lbfoster.com
Web: www.lbfoster.eu
Contact: Adrian Pryce
LBL Finishers
Gunstore Road
Hilsea
Portsmouth PO3 5HL
Tel: 023 9269 2020
Fax: 023 9267 0379
Email: sales@tomburn.co.uk
Contact: Chris Mansfield -
Commercial Director
Lea Manufacturing
Unit 1, Tongue Lane Ind. Estate
Buxton
SK17 7LN
Tel: 0845 1300 988
Fax: 0845 1300 944
Email: info@lea.co.uk
Web: www.lea.co.uk
Contact: Neil Livesey
Lechler Ltd
1 Fell Street, Newhall
Sheffield S9 2TP
Tel: 0114 249 2020
Email: info@lechler.com
Web: www.lechler.co.uk
Leco Instruments UK Ltd
Unit 7 Rhino Court
Bramhall Moor Lane
Hazel Grove
Stockport SK7 5ER
Tel: 0161 487 5900
Email: sales_uk@leco.com
Web: https://eu.leco.com/
Contact: Lucy Hall
Leonardt Ltd
New Road, Highley
Nr Bridgnorth
Shropshire
WV16 6NN
Tel: 01746 861203
Fax: 0121 615 3352
Email: jacquie.thompson@
leonardt.com
Web: www.leonardt.com
Contact: Jacquie Thompson
S.E.A. Member
Leonhard Breitenbach GmbH
Walzenweg 60
57072 Siegen
Germany
Tel: +49 271 3758-0
Email: office@breitenbach.de
Web: www.breitenbach.de
Leuze Electronic Ltd
Terek House, Phoenix Park
Eaton Socon
St. Neots
Cambs PE19 8EP
Tel: 01480 408500
Fax: 01480 403808
Email: mail@leuze.co.uk
Web: www.leuze.co.uk
Contact: Customer Support Team
2022 edition – Finishing Industries Yearbook

64 A-Z COMPANY INDEX
Lhoist UK Ltd - Neutralac
Hindlow, Buxton
Derbyshire SK17 0EL
Tel: 01298 768641
Email: xavier.mear@lhoist.com
Web: www.neutralac.co.uk
Contact: Xavier Mear
Litre Meter Ltd
Hart Hill Barn
Granborough Road
North Marston
Buckingham MK18 3RZ
Tel: 01296 670200
Email: sales@litremeter.com
Web: www.litremeter.com
Contact: Chris Ringer
London & Brighton Plating
Co. Ltd
100 North Street, Portslade
W. Sussex BN41 1DG
Tel: 01273 418122
Fax: 01273 410316
Email: info@lbplating.com
Web: www.lbplating.com
Contact: Stefan De Lillis
S.E.A. Member
B&M Longworth
Sett End Road North
Shadsworth Business Park
Blackburn BB1 2QG
Tel: 01254 680501
Fax: 01254 686539
Email: enquiries@bmlongworth.
com
Web: www.bmlongworth.com
Contact: Moira Mackay
Manufacturer of pyrolysis/burn off
ovens for the finishing industry.
Provider of contract cleaning
services for industrial parts;
processes include burn-off,
ultrasonic and aqueous, superheated
steam, roller flushing and
decontamination for oxygen use.
Loughborough Surface
Analysis Ltd
Pegasus House
Prince William Road
Loughborough
Leics LE11 5GU
Tel: 01509 260779
Email: enquiries@lsaltd.co.uk
Web: www.lsaltd.co.uk
I.M.F. Member
LPD Lab Services Ltd
Suite 1, D Building Phillips Site
Phillips Road
Blackburn BB1 5RZ
Tel: 01254 676074
Fax: 01254 278845
Email: enquiries@lpdlabservices.
co.uk
Web: www.lpdlabservices.co.uk
LTH Electronics Ltd
Chaul End Lane
Luton LU4 8EZ
Tel: 01582 593693
Email: sales@lth.co.uk
Web: www.lth.co.uk
Lutz Jesco
Unit C1 Loades Ecoparc
Blackhorse Road
Coventry CV7 9FW
Tel: 024 7710 3306
Email: tosh.singh@lutz-jesco.com
Web: www.lutzpump.co.uk
Web: www.lutz-jesco.co.uk
Contact: Tosh Singh
LVH Coatings Ltd
Chelmsley Works
Station Road, Coleshill
Birmingham B46 1HT
Tel: 01675 466888
Fax: 01675 466260
Email: sales@lvh-coatings.co.uk
Web: www.lvh-coatings.com
Contact: Tom Vanes
I.M.F. Member
Maag Flock GmbH
Ulrichstr. 19
D-72116 Moessingen
Germany
Tel: +49 7473 9554500
Email: info@maagflock.com
Web: www.maagflock.com
M.A.J. Hi-Spec Ltd
1 Scott Street, Keighley
W. Yorks BD21 2JJ
Tel: 01535 606524
Email: sales@majhispecltd.co.uk
Web: www.majhispecltd.co.uk
Malden Plating Works Ltd
5 Wandle Way, Mitcham
Surrey CR4 4NB
Tel: 020 8640 1272
Email: enquiries@maldenplating.
com
Web: www.maldenplating.com
Mansfield Anodisers Ltd
46 Hermitage Way
Mansfield, Notts NG18 5ES
Tel: 01623 627700
Email: sales@mansfield-anodisers.
co.uk
Web: www.mansfield-anodisers.
co.uk
S.E.A. Member
March May Ltd
Howard Road, Eaton Socon
Cambs PE19 8NZ
Tel: 01480 214444
Email: sales@marchmay.co.uk
Web: www.marchmay.co.uk
I.M.F. Member
Master Abrasives Ltd
High March
Long March Ind. Estate
Daventry
Northants NN11 4PG
Tel: 01327 703813
Email: sales@master-abrasives.
co.uk
Web: www.master-abrasives.co.uk
Maxi-Blast, Inc.
3650 North Olive Road
South Bend
Indiana 46628
USA
Tel: +1 574 233 1161
Web: www.maxiblast.com
MCM Conveyors
A Division of Amber Industries
Ltd
Amber House
Crompton Street
Chadderton
Oldham OL9 9AA
Tel: 0161 284 2222
Fax: 0161 627 0075
Email: info@amber-industries.
ltd.uk
Web: www.amber-industries.ltd.uk
Contact: Mark Adams
MecWash Systems Ltd
64 Hundred, Severn Drive
Tewkesbury Business Park
Tewkesbury
Glos. GL20 8SF
Tel: 01684 271600
Fax: 01684 271601
Email: enquire@mecwash.co.uk
Web: www.mecwash.co.uk
Contact: John Pattison -
Managing Director
Precision cleaning & degreasing
specialists. We design and
manufacture a complete range of
aqueous parts cleaning and
degreasing systems for metal and
plastic engineering components.
Used in the Aerospace,
Automotive, Defence, General
Engineering and Medical
industries. We specialise in
achieving high cleanliness
standards for components with
complex geometries, difficult
substrates or tenacious
contaminants. Our parts washers
support the full range of
engineering processes, including
machined castings, forgings,
turned parts, pressings, extrusions
and mouldings.
Membracon (UK) Ltd
Third Floor
Derwent House
42-46 Waterloo Road
Wolverhampton
WV1 4XB
Tel: 01902 458501
Fax: 01902 302318
Email: info@membracon.co.uk
Web: www.membracon.co.uk
Merlin Electro-Plating Ltd
Units 137/138 Block 15
Mosshall Road
Newhouse Ind. Estate
Motherwell
ML1 5RX
Tel: 01698 734038
Fax: 01698 834847
Email: info@merlinep.co.uk
Web: www.merlinep.squarespace.
com
Contact: Andrew Machray
Merlin Electro-Plating is a wellestablished
metal finishing
company founded in 1984 &
Certified to ISO 9001.
We offer a wide variety of
metal finishes, approved by
manufacturing and aerospace
industries.
Metafin Group Holdings Ltd
Northcote Street
Walsall
W. Midlands
WS2 8BQ
Tel: 01922 626073
Web: www.metafin.co.uk
Metal Improvement Company
(CWST)
European Corporate Office
Hambridge Lane
Newbury
Berks
RG14 5TU
Tel: 01635 279621
Fax: 01635 279629
Email: eurosales@cwst.com
Web: www.cwst.co.uk
Contact: Ben Hayes
Metal Improvement Company
provides effective solutions to
enhance the performance of
metals and materials. We can
improve fatigue strength,
selective hardness, precision
shaping and enable a high
quality surface finish. We offer
controlled shot peening, laser
peening, peen forming,
superfinishing, solid film lubricant
(SFL) coatings and on site
processing worldwide.
A business unit of Curtiss-Wright
Surface Technologies (CWST).
Finishing Industries Yearbook – 2022 edition

Surface Technologies
CWST have developed a Post Additive
Manufacturing process to:
l Improve surface finish and surface
characterisation
l Improve component cleanliness
l Remove support structures
l Remove sintered surface
l Surface compression and densification
l Management of residual stresses
l Improve fatigue life
www.cwst.co.uk | eurosales@cwst.com | 01635 279621

66 A-Z COMPANY INDEX
Metal Treatments
(Portsmouth) Ltd
Unit 12, Limberline Spur
Hilsea, Portsmouth
Hants PO3 5HJ
Tel: 023 9269 3402
Fax: 023 9263 9456
Email: info@metaltreatments.co.uk
Web: www.metaltreatments.co.uk
Contact: Mark Mays
Met-Chem, Inc.
837 E. 79 St.
Cleveland, OH 44103, USA
Tel: +1 216 881 7900
Email: info@metchem.com
Web: www.metchem.com
Metreel Limited
Cossall Ind. Estate
Coronation Road, Ilkeston
Derbyshire DE7 5UA
Tel: 0115 647 0157
Email: sales@metreel.co.uk
Web: www.metreel.co.uk
Metro Engineering & Plating
Works Ltd
Unit 3, Chartridge Development
Eskdale Road, Uxbridge
Middx UB8 2RT
Tel: 01895 238641
Email: sales@metroplating.co.uk
Web: www.metroplating.co.uk
Mid-Anglia Engineering Ltd
Wetmore Road
Burton-On-Trent
Staffs DE14 1SH
Tel: 01283 563616
Fax: 01283 511135
Email: info@midanglia.com
Web: www.midanglia.com
Contact: Gill Mansfield
Keith Hough
Midland Deburr and Finish
Ltd
Unit 5, Lye Valley Ind. Estate
Bromley Street, Lye
W. Midlands DY9 8HX
Tel: 01384 891198
Email: sales@midlanddeburrand
finish.co.uk
Web: www.midlanddeburrand
finish.co.uk
I.M.F. Member
Midland Polishing & Plating Ltd
Unit 1, Marston Road Ind. Estate
Marston Road
Wolverhampton WV2 4LX
Tel: 01902 421174
Fax: 01902 713613
Email: info@midlandpolishing.
co.uk
Web: www.midlandpolishing.co.uk
Contact: Steve Dowd
S.E.A. Member
Mighty Lube Systematic
Lubrication, Inc.
9569 W. 40th Street
Fremont, MI 49412
USA
Tel: +1 231 924 6160
Fax: +1 231 924 6810
Web: www.mightylube.com
Mipa Paints Ltd
Applied House
Fulflood Road
Leigh Park
Portsmouth
Havant PO9 5AX
Tel: 023 9247 4234
Email: sales@mipa-paints.co.uk
Web: https://mipa-paints.uk/
Mirka (UK) Ltd
Saxon House
Shirwell Crescent
Furzton Lake
Milton Keynes
MK4 1GA
Tel: 01908 866100
Email: sales.uk@mirka.com
Web: www.mirka.com
MMP Electrovibe UK Ltd
Unit 2
Brockhampton Road
Havant
Hants PO9 1JU
Tel: 01243 379204
Email: enquiries@mmpelectrovibe.com
Web: www.mmpelectrovibe.com
Contact: Mark Davies
S.E.A. Member
As leaders in technical surface
finishing of stainless steel, we
provide subcontract services for
Mechanical Polishing,
Electropolishing, Pickling,
Passivation and Bead Blasting and
we are preferred finishers to major
manufacturers serving UK and
Global markets. We hold ISO
9001:2015 and ISO 14001:2015
accreditations. We are members
of the British Stainless Steel
Association and the Surface
Engineering Association.
MOCAP Ltd
Hortonwood 35
Telford
Shropshire
TF1 7YW
Tel: 01952 670247
Email: sales@mocap.co.uk
Web: www.mocap.co.uk
Monometer Holdings Ltd
Industrial Infrared Division
Monometer House
Rectory Grove, Leigh On Sea
Essex SS9 2HN
Tel: 01702 472201
Email: garykenney@monometer.
co.uk
Web: www.monometer.co.uk
Contact: David Hall
Morrells Woodfinishes Ltd
Mill Lane, Woodley
Stockport SK6 1RN
Tel: 0161 406 5300
Email: hello@morrells.co.uk
Web: www.morrells.co.uk
Moss Metal Finishing Ltd
Units 9 & 14, Brow Mills Ind. Estate
Hipperholme, Halifax
W. Yorks HX3 8EF
Tel: 01422 203527
Fax: 01422 205857
Web: www.moss-metal-finishing.
co.uk
I.M.F./S.E.A. Member
Movac Group Ltd
11 Portman Road
Ipswich, Suffolk IP1 2BP
Tel: 0844 561 0070
Fax: 0844 561 0080
Email: info@movac.com
Web: www.movac.com
Contact: Mark Smith
M & R Coatings
Unit 17, Knightcott Ind. Estate
Banwell, Bristol BS29 6JN
Tel: 01934 823175
Fax: 01934 824219
Email: mike@mrcoatings.co.uk
Web: www.mrcoatings.co.uk
Contact: Mike Leach
M.S.P. (Scotland) Ltd Powder
Coating Division
40-42 Telford Road
East Lenziemill
Cumbernauld G67 2AX, Scotland
Tel: 01236 729591
Email: sales@mspscot.co.uk
Web: www.mspcladding.co.uk
Müller TB Technologies AG
Laubisruetistrasse 72
CH-8712 Staefa
Switzerland
Tel: +41 44 926 44 88
Fax: +41 44 926 67 74
Email: sales@muller.ch
Web: www.muller.ch
Nasmyth West Middlesex Ltd
Unit 5, Chartridge Development
Eskdale Road
Uxbridge
Middx. UB8 2RT
Tel: 01895 252185
Fax: 01895 810755
Email: Enquiries@nasmythwmst.
com
Web: www.NasmythGroup.com
Contact: Andy Brasier
S.E.A. Member
NCS Colour AB
Igeldammsgatan 30
P.O. Box 49022
S-10028 Stockholm
Sweden
Tel: +46 8 6174700
Email: info@ncscolour.com
Web: www.ncscolour.com
New Guard Coatings (Hull)
355 Hedon Road
Hull HU9 1RA
Tel: 01482 321154
Email: northsales@newguard
coatings.com
Web: www.newguardcoatings.com
New Guard Coatings
(Midlands)
2 George Street
Barwell LE9 8GN
Tel: 01455 844440
Email: northsales@newguard
coatings.com
Web: www.newguardcoatings.com
New Guard Coatings (North
West)
Units 19-20 Prestwood Court
Leacroft Road
Warrington WA3 6SB
Tel: 01925 852225
Email: northsales@newguard
coatings.com
Web: www.newguardcoatings.com
New Guard Coatings
(Scotland)
Unit 30, Auldhouse Retail Park
Cogan Street, Pollokshaws
Glasgow G43 1AP, Scotland
Tel: 0141 440 7213
Email: northsales@newguard
coatings.com
Web: www.newguardcoatings.com
New Guard Coatings (South
East)
Unit 12, Mid-Sussex Business Park
Ditchling Common
Burgess Hill BN6 8SE
Tel: 01444 870087
Email: northsales@newguard
coatings.com
Web: www.newguardcoatings.com
Finishing Industries Yearbook – 2022 edition

A-Z COMPANY INDEX 67
New Guard Coatings North
Sandbeck Way, Wetherby
W. Yorks LS22 7DN
Tel: 01937 586311
Email: northsales@newguard
coatings.com
Web: www.newguardcoatings.com
Newsmith Stainless Ltd
Child Lane
Roberttown, Liversedge
W. Yorks WF15 7PH
Tel: 01924 405988
Fax: 01924 403304
Email: sales@newsmiths.co.uk
Web: www.newsmiths.co.uk
NHE Applied Process
Technology
Lyons Park
Coventry CV5 9PF
Tel: 024 7625 3099
Fax: 024 7655 1402
Email: info@nhe.uk.com
Web: www.nhe.uk.com
Contact: Steve Dando, Sales
Manager
Niko Ltd
Unit 15-21 Insight Park
Welsh Road East
Southam
Warks CV47 1NE
Tel: 01926 813111
Fax: 01926 815599
Email: sales@niko.co.uk
Web: www.niko.co.uk
Nipro Ltd
Unit 31 Oakhill Trading Estate
Devonshire Road
Walkden M28 3PT
Tel: 01204 571120
Web: www.nipro.co.uk
S.E.A. Member
Nottingham Platers Ltd
Unit 1
Vernon Park Trading Estate
Southwark Street, Basford
Nottingham NG6 0DB
Tel: 0115 978 4637
Email: sarah@chrome-platers.com
Web: www.chrome-platers.com
Contact: Sarah Knowles
S.E.A. Member
Decorative Nickel Chrome Plating.
Bright, Satin, Nisheen and Niline
Finishes
Nottingham Platers Limited
“Trivalent Chrome Specialists”.
Nuns Street Plating Ltd
109 Nuns Street
Derby
D1 3LS
Tel: 01332 342573
Email: sales@electroplaters.uk.
com
Web: www.nunstreetplating.co.uk
Nu-Pro Limited
Eagle Works
London Road
Stroud
Gloucestershire
GL5 2BA
Tel: 01453 883344
Email: sales@nu-pro.com
Web: www.nu-pro.com
Contact: Tony Chester
S.E.A. Member
Nu-Pro Limited offers; Surface
Treatment special processes,
Chemical Milling and Paint
coatings to the Aerospace
Defence & Space manufacturing
sector. This is further
complimented by CNC Turning,
3, 4 & 5 Axis Milling and Sub
Assembly. Thus offering a single
point manufacturing solution.
Nylon Colours Ltd
Chamberlain Road
Aylesbury
Bucks
HP19 8DY
Tel: 01296 433754
Fax: 01296 392285
Email: sales@nyloncolours.
co.uk
Contact: Steve Rennie
Odlings MCR Ltd
Rosscliffe Road
Ellesmere Port
Cheshire
CH65 3AS
Tel: 0151 355 0261
Email: sales@odlingsmcr.co.uk
Web: www.odlingsmcr.co.uk
Oil Technics Ltd
Linton Business Park
Gourdon
Aberdeenshire
DD10 0NH
Tel: 01561 361515
Fax: 01561 361001
Email: info@oiltechnics.com
Web: www.oiltechnics.com
Omex Environmental Ltd
Riverside Ind. Estate
Estuary Road, Kings Lynn
Norfolk PE30 2HH
Tel: 01553 770092
Fax: 01553 776547
Email: dimitrist@omex.com
Web: www.omexenvironmental.
com
Contact: Dimitris Theodoridis
Omex Environmental produces
and supplies a range of
environmentally friendly products
used for neutralising and removing
metals from acidic metal-bearing
effluents. Magmex grades are the
safe and cost effective alternatives
to caustic soda producing less
sludge for disposal, and are
available in IBCs or bulk.
Omnikote Ltd
Chamberlain Road
Aylesbury, Bucks HP19 8DY
Tel: 01296 483266
Fax: 01296 392285
Email: sales@omnikote.co.uk
Web: www.omnikote.co.uk
Contact: Ivan Dmytrenko
Orapi Applied Ltd
Spring Road, Smethwick
W. Midlands B66 1PT
Tel: 0121 525 4000
Fax: 0121 525 4919
Email: info@orapiapplied.com
Web: www.orapiapplied.com
Orrmac Coatings Ltd
Newton Chambers Road
Thorncliffe Park Estate
Chapeltown, Sheffield S35 2PH
Tel: 0114 246 1237
Email: sales@orrmac.co.uk
Web: www.orrmac.com
Owen Coyle Anodising Ltd
Alpha Works, Blyth Road
Hayes, Middx UB3 1DE
Tel: 020 8573 0184
Email: info@owencoyle-anodising.
co.uk
W: www.owencoyle-anodising.co.uk
Paint Finishing Systems Ltd
Unit 3 Pioneer Ind. Estate
Ormskirk Road
Wigan WN5 9DN
Tel: 01942 216090
Email: sales@paintfinishing
systems.co.uk
Web: www.paintfinishingsystems.
co.uk
Contact: Paul Kershaw
PaintExpo
Leipziger Messe GmbH
Messe-Allee 1
04356 Leipzig, Germany
Tel: +49 341 678 7793
Email: info@paintexpo.de
Web: www.paintexpo.de/en
Palintest Ltd
Palintest House, Kingsway
Team Valley Trading Estate
Gateshead, Tyne & Wear
NE11 0NS
Tel: 0191 491 0808
Email: sales@palintest.com
Web: www.palintest.com
Paramount Powders (UK) Ltd
4 Viveash Close
Hayes, Middx UB3 4RY
Tel: 020 8561 5588
Fax: 020 8561 5599
Email: sales@paramountpowders.
co.uk
Web: www.paramountpowders.
co.uk
Partech Instruments
Rockhill Business Park
Higher Bugle, St. Austell
Cornwall PL26 8RA
Tel: 01726 879800
Email: info@partech.co.uk
Web: www.partech.co.uk
PDJ Vibro Ltd
46 Barton Road, Bletchley
Milton Keynes MK2 3BB
Tel: 01908 648757
Web: www.vibratoryfinishing.
co.uk
Pearson Panke Ltd
Office No 1, First Floor
Brittanic House
Stirling Way
Borehamwood WD6 2BT
Tel: 020 8959 3232
Email: sales@pearsonpanke.co.uk
Email: laurance.johnson@
Email: pearsonpanke.co.uk
Web: www.pearsonpanke.co.uk
Contact: Laurance Johnson
Peatey’s Paint + Powder
Coaters
Calcutta Works, Green Lane
Yeadon, W. Yorks LS19 7BY
Tel: 0113 250 1046
Email: sales@peateys.co.uk
Web: www.peateys.co.uk
2022 edition – Finishing Industries Yearbook

68 A-Z COMPANY INDEX
Peerless Plastics & Coatings
Ltd
16-20 Howlett Way
Thetford, Norfolk IP24 1HZ
Tel: 01842 750333
Email: sales@peerless-coatings.
co.uk
Web: www.peerless-coatings.co.uk
P.R.A. Member
Peterborough Plating
Company Ltd
Unit 12 Maxwell Road
Woodston Ind. Estate
Peterborough PE2 7HU
Tel: 01733 233250
Fax: 01733 371411
Email: quotes@peterborough
plating.co.uk
Web: www.peterboroughplating.
co.uk
S.E.A. Member
Phoenix County Metals Ltd
Great Central Way
Woodford Halse
Northants NN11 3PZ
Tel: 01327 260581
Email: lucy@pcm-ltd.co.uk
Email: frances@pcm-ltd.co.uk
Web: www.pcm-ltd.co.uk
Contact: Lucy Tee
Frances Shuttlewood
I.M.F. Member
PHOENIX County Metals are
specialists in the recovery of Gold,
Silver, Platinum, Palladium &
Rhodium.
Whatever your manufacturing
process, if the waste produced
contains precious metals, it can be
reclaimed, turning your waste into
profit. Our own, fully equipped in
house laboratory, allows us to
analyze your material promptly.
Our key principle is that when
possible, we sample and analyze
prior to processing, agreeing
expectations and charges with you
before recovery begins.
We would be pleased to discuss
the material that you have and
the various recovery options.
Phoenix Electroplating Ltd
Milltown Street, Radcliffe
Manchester M26 1WN
Tel: 0161 725 9479
Fax: 0161 725 9714
Email: kathryn@electroplating.
co.uk
Web: www.electroplating.co.uk
Contact: Kathryn McKenzie
S.E.A. Member
Phoenix Naylors Abrasives
Ltd
Bridge Way
Off Broombank Road
Chesterfield Trading Estate
Chesterfield
S41 9QJ
Tel: 0161 320 9580
Web: www.phoenixabrasives.
co.uk
PhoenixTM
25 Earith Business Park
Meadow Drove
Earith
Cambs PE28 3QF
Tel: 01353 223100
Email: sales@phoenixtm.com
Web: www.phoenixtm.com
Contact: Dr Steve Offley
Pickersgill Electro-Plating
Pepper Road
Leeds
LS10 2PP
Tel: 0113 271 4909
Fax: 0113 276 0546
Email: sales@pickersgills.co.uk
Web: www.pickersgills.co.uk
PI-KEM Ltd
Unit 18-20 Magnus
Tame Valley Business Centre
Tamworth
Staffs B77 5BY
Tel: 01827 259250
Email: sales@pi-kem.co.uk
Web: www.pi-kem.co.uk
We are specialist suppliers of
advanced materials & equipment
for innovative research, from labscale
to production. We custom
manufacture to exact
specifications, have expertise in
sourcing niche products through
our trusted network of worldwide
suppliers and offer an on-line
range of standard stock products
including consumables available
for immediate despatch.
Plasbrun Plastics Engineering
Ltd
Unit C Brookfield Drive
Bridgtown
Cannock
Staffs WS11 0JR
Tel: 01543 462802
Email: plasbrun.plastics@outlook.
com
Web: www.plasbrunplastics.co.uk
Plasma Coatings Ltd
Meverill Road
Tideswell
Derbyshire
SK17 8PY
Tel: 01298 873700
Fax: 01298 873708
Email: info@plasma-group.co.uk
Web: www.plasma-group.co.uk
Plastic Coatings Ltd
Ham Lane
Kingswinford DY6 7JY
Tel: 0800 008 6903
Fax: 01384 298740
Email: enquiries@plastic-coatings.
com
Web: www.plasticcoatings.co.uk
Plasticoat GB Ltd
12 Wingate Road
Gosport
Hants PO12 4DP
Tel: 023 9252 1321
Email: enquiries@plasticoat.co.uk
Web: www.plasticoat.co.uk
Plasticraft
Lyons Park
Coventry CV5 9PF
Tel: 024 7625 3099
Fax: 024 7655 1402
Email: info@nhe.uk.com
Web: www.nhe.uk.com
Contact: Steve Dando, Sales
Manager
Plastratum Ltd
100 Armoury Road
Small Heath
Birmingham B11 2RH
Tel: 0121 314 1191
Email: mike@plastratum.com
Web: www.plastratum.com
Contact: Mike Taylor
Plating Equipment Ltd
66 Edison Road
Aylesbury
Bucks HP19 8TE
Tel: 01296 431666
Email: sales@platingequipment.
co.uk
Web: www.platingequipment.
co.uk
Contact: Cedric Clifford
S.E.A. Member
Plating Line Advice
12 Glendower Avenue
Coventry
CV5 8BE
Tel: 07481 322263
Email: info@plating-line-advice.
com
Web: www.plating-line-advice.
com
Contact: Will Green FIMF
PMD Chemicals Ltd
401 Broad Lane
Coventry CV5 7AX
Tel: 024 7692 0168
Email: sales@pmdchemicals.co.uk
Web: www.pmdchemicals.co.uk
Contact: Graham Pemberton
I.M.F./S.E.A. Member
Since PMD was founded in 1959
the company has been dedicated
to providing the Metal Finishing,
PCB and Electronics Industries with
“First Class” process chemistry
backed up by unrivalled technical
support and customer service.
We are one of the largest
Independent Manufacturers and
Suppliers of process chemistry in
the UK.
PMD UK Ltd
Broad Lane
Coventry CV5 7AY
Tel: 024 7692 0167
Email: sales@pmdgroup.co.uk
Web: www.pmdgroup.co.uk
Contact: Mark Callender
PNR UK Ltd
28a Harris Business Park
Stoke Prior, Bromsgrove
Worcs B60 4DJ
Tel: 01527 579066
Email: spraynozzles@pnr.co.uk
Web: www.pnr.co.uk
Contact: Adrian Faulkner
Poeton Industries Ltd
Eastern Avenue
Gloucester GL4 3DN
Tel: 01452 300500
Email: sales@poeton.co.uk
Web: www.poeton.co.uk
I.M.F./S.E.A. Member
Polarseal Tapes and
Conversions
Guildford Trading Estate
Farnham
Surrey GU9 9PZ
Tel: 01252 726000
Email: enquiries@polarseal.net
Web: www.polarseal.net
Polymer Coating Solutions Ltd
Unit 7, Strensham Business Park
Strensham
Worcestershire WR8 9JZ
Tel: 01684 850440
Email: polysol@btconnect.com
Web: www.polymercoating
solutions.co.uk
Finishing Industries Yearbook – 2022 edition

70 A-Z COMPANY INDEX
Pometon
No. 5
Queensway Link Ind. Estate
Stafford Park 17, Telford
Shropshire TF3 3DN
Tel: 01952 299777
Fax: 01952 299008
Email: sales@pometon.co.uk
Powdertech (Corby) Ltd
Units 5/6, Cockerell Road
Phoenix Parkway, Corby
Northants NN17 5DU
Tel: 01536 400890
Email: richard.b@powdertech.
co.uk
Web: www.powdertechcorby.co.uk
Contact: Richard Besant
Powdertech Surface Science
27 Murdock Road, Bicester
Oxon OX26 4PP
Tel: 01869 248218
Email: sales@powdertech.co.uk
Web: www.powdertechsurface
science.co.uk
Contact: James Grant
S.E.A. Member
Power Jacks Ltd
Kingshill Commercial Park
Prospect Road, Westhill
Aberdeenshire AB32 6FP
Scotland
Tel: 01224 968968
Email: sales@powerjacks.com
Web: www.powerjacks.com
Powerstax Ltd.
Unit 5 & 6, Heron Avenue
Wickford, Essex SS11 8DL
Tel: 01268 568200
Email: sales@powerstax.com
Web: www.powerstax.com
I.M.F. Member
PPG Industries (UK) Ltd,
Selemix Customer Service
Needham Road
Stowmarket IP14 2AD
Tel: 01449 773933
Fax: 01449 771547
Email: ukenquiries@ppg.com
Web: www.selemix.com
Precision Micro
11 Vantage Way, Erdington
Birmingham B24 9GZ
Tel: 0121 380 0100
Email: info@precisionmicro.com
Web: www.precisionmicro.com
Premiere Servicing Ltd
Unit 1 Canalside Ind. Estate
Woodbine Street East
Rochdale, Lancs OL16 5LB
Tel: 01706 347070
E: info@premiereservicing.co.uk
Web: www.premiereservicing.co.uk
The Preparation Group
Preparation House
Deacon Road, Lincoln LN2 4JB
Tel: 01522 561460
Web: www.ppcgroup.co.uk
PreTreat Ltd
Crown Works, Rochdale Road
Todmorden, Lancs OL14 6LD
Tel: 01422 847671
Email: info@pretreat.co.uk
Web: www.pretreat.co.uk
Web: www.saltspraytest.co.uk
Contact: Andy Shipton
Simon Burrows
Pre-Treatment Solutions Ltd
134 High Street, Barwell
Leics LE9 8DR
Tel: 024 7509 0133
Fax: 024 7509 0139
Email: sales@pretreatment
solutionsltd.com
Web: www.pretreatmentsolutions
ltd.com
ProMinent Fluid Controls (UK)
Ltd
Resolution Road
Ashby-de-la-Zouch
Leics LE65 1DW
Tel: 01530 560555
Email: sales-uk@prominent.com
Web: www.prominent.co.uk
Contact: Wesley Sutton -
Managing Director
Proplate Limited
17 Armstrong Road
Manor Trading Estate
Benfleet, Essex SS7 4PW
Tel: 01268 752037
Fax: 01268 755862
Email: proplatelimited@gmail.com
Web: www.proplatelimited.com
S.E.A. Member
Pro Test Panels Ltd
38 Padgets Lane
South Moons Moat
Redditch B98 0RD
Tel: 01527 514404
Email: sales@testpanels.com
Web: www.testpanels.com
Contact: Paul Jobbins
I.M.F. Member
Protech Chemicals Ltd
7600 Henri Bourassa West
St. Laurent
Quebec H4S 1W3, Canada
Tel: +1 514 745 0200
Fax: +1 514 745 9423
Email: sales@protechpowder.com
Web: www.protechpowder.com
Contact: Mark Lazarus
Purpose Powder Coatings Ltd
18 Manor Grove
London SE15 1SX
Tel: 020 7639 2511
Fax: 020 7277 5942
Email: sales@purposepowder
coatings.com
www.purposepowdercoating.com
Contact: Sales
S.E.A. Member
Q-Lab Europe Ltd
Express Trading Estate
Stonehill Road, Farnworth
Bolton BL4 9TP
Tel: 01204 861616
Fax: 01204 861617
Email: info.eu@q-lab.com
Web: www.q-lab.com
S.E.A. Member
QSE Metalblast Ltd
11 Cowley Road
Nuffield Ind. Estate, Poole
Dorset BH17 0UJ
Tel: 01202 672152
Email: sales@qsemetalblast.co.uk
Web: www.metalblastdorset.co.uk
Quality Plated Products Ltd
Shady Lane, Great Barr
Birmingham B44 9ER
Tel: 0121 366 7500
Fax: 0121 366 6436
Web: www.qppltd.co.uk
Qualplast (1991) Ltd
Old Walsall Road, Great Barr
Birmingham B42 1EA
Tel: 0121 357 5858
Fax: 0121 357 5855
Email: enquiries@qualplast.com
Web: www.qualplast.com
Quickwood U.K.
Station Road, Braughing
Ware, Herts SG11 2PB
Tel: 01920 822922
Fax: 01920 822909
Email: qw@quickwood.co.uk
Web: www.quickwood.co.uk
RCJ Metal Finishers
Unit 3 & 4 Pindar Works
Pindar Road, Hoddesdon
Herts EN11 0BZ
Tel: 01992 467931
Email: rcjmfltd@gmail.com
Web: www.chromeplaters.co.uk
I.M.F. Member
RDM Industrial Services Ltd
Stakehill Lane, Middleton
Manchester M24 2RW
Tel: 0161 643 9333
Fax: 0161 655 3467
Email: sales@rdmengineering.
co.uk
Web: www.rdmengineering.co.uk
Contact: Robert Horwich
Redditch Shotblasting Co. Ltd
Unit 6-7, Bartleet Road
Washford Ind. Estate, Redditch
Worcs B98 0DQ
Tel: 01527 529659
Email: sales@redditchshot
blasting.co.uk
Web: www.redditchshotblasting.
co.uk
Contact: Paul Joynes
Ridgeway Plant Co. Ltd
103 Airport Road
Belfast
Antrim BT3 9ED
Northern Ireland
Tel: 028 9045 4599
Email: info@ridgeway-online.com
Web: www.ridgeway-online.com
Riesmetal GmbH
Gewerbestrasse 7
D-86720 Noerdlingen
Germany
Tel: +49 9081 86018
Email: riesmetal@t-online.de
Web: www.ascona-project.com
Contact: Joachim Ramisch
Riley Surface World
Redhouse Ind. Estate
Middlemore Lane West
Aldridge
W. Midlands WS9 8BG
Tel: 01922 458000
Fax: 01922 458001
Email: info@rileysurfaceworld.
co.uk
Web: www.rileysurfaceworld.co.uk
Contact: Michael Riley
I.M.F./S.E.A. Member
Riley Surface World is Europe’s
leading reseller of new and used
surface technology equipment,
including electroplating and
powder coating plants. Our stock
includes: Deburring and Polishing
machines, Cleaning and
Degreasing Equipment, Ovens,
Furnaces and Chillers, Blasting
machines and Dust & Fume
Extraction plant and equipment.
Finishing Industries Yearbook – 2022 edition

A-Z COMPANY INDEX 71
Risby Air Conditioning Co Ltd
Princes Road, Bourne End
Bucks SL8 5HZ
Tel: 01628 850123
Email: info@risby.co.uk
Web: www.risby.co.uk
RJH Finishing Systems Ltd
Artillery Street
Heckmondwike
West Yorkshire WF16 0NR
Tel: 01924 402490
Fax: 01924 404635
Email: sales@rjhfinishing.co.uk
Web: www.rjhfinishing.co.uk
Contact: Helen Timmins
Robert Stuart Ltd
10-11 Edinburgh Way
Harlow, Essex CM20 2DH
Tel: 01279 442931
Fax: 01279 626063
Email: ian.smith@robert-stuart.
co.uk
Web: www.robert-stuart.co.uk
Contact: Ian Smith
S.E.A. Member
Rollwasch Italiana SpA
Via S. Carlo 21
I-20847 Albiate (MB), Italy
Tel: +39 0362 930334
Fax: +39 0362 931440
Email: info@rollwasch.it
Web: www.rollwasch.it
Contact: Paolo Redaelli
Rösler UK Limited
1 Unity Grove
Knowsley Business Park
Prescot
Merseyside L34 9GT
Tel: 0151 482 0444
Fax: 0151 482 4400
Email: rosler-uk@rosler.com
Web: www.rosler.com
Contact: Sandra Banks
Rotajet Systems
Unit 14, Flanshaw Way
Wakefield
W. Yorks WF2 9LP
Tel: 01924 271446
Email: info@rotajet.co.uk
Web: www.rotajetsystems.com
Contact: Colin Steward
Rousselet/Robatel UK Ltd
Parkside House
17 East Parade
Harrogate HG1 5LF
Tel: 01423 530093
Fax: 01423 530120
Email: sales@rousselet-robatel.
co.uk
Web: www.rousselet.com
Contact: Dean Evans - Sales
Manager
Metallveredlung Rudolf
Clauss GmbH & Co KG
Duesseldorfer Str. 196 -202
D-45481 Muelheim a.d. Ruhr
Germany
Tel: +49 208 4842736
Fax: +49 208 460288
Email: info@metallveredelung.de
Web: www.rudolf-clauss.de
Rutpen Ltd
Membury Airfield
Lambourn, Berks RG17 7TJ
Tel: 01488 71926
Email: sales@rutpen.co.uk
Web: www.rutpen.co.uk
Contact: Mark Jenkins
Ruwac USA
54 Winter Street
Holyoke
MA 01040, USA
Tel: +1 413 532 4030
Web: www.ruwac.com
SAIT Abrasives (UK) Ltd
Regent House, Meridian East
Meridian Business Park
Leicester LE19 1WZ
Tel: 0344 801 3355
Email: info@sait-abrasives.co.uk
Web: www.sait-abrasives.co.uk
Salt and Sadler Ltd
71 Rea Street, Digbeth
Birmingham B5 6BB
Tel: 0121 622 3887
Email: info@saltandsadler.co.uk
Web: www.saltandsadler.co.uk
SAMES KREMLIN
13, chemin de Malacher
F-38240 Meylan
France
Tel: 07771 955131
Email: chris.pilkington@sameskremlin.com
marie-anne.guilldou@sameskremlin.com
Web: www.sames-kremlin.com
Contact: Chris Pilkington - UK
Sales Manager
SAMES KREMLIN provides
industrial solutions for productivity,
quality improvement, material &
cost savings. We design and
manufacture process equipment -
manual sprayguns, automatic and
robotic applicators, pumps &
machines for fluid handling,
dosing, mixing & dispensing.
We allow you to “Apply Your
Skills” for the best performance
and productivity possible.
Sandvik Osprey Ltd
Red Jacket Works, Milland Road
Neath SA11 1NJ
Tel: 01639 634121
Web: www.metalpowder.sandvik
Sandwell UK Ltd
2 Foundry Place
Towcester, Northants NN12 6FP
Tel: 01327 350205
Email: sales@sandwell-uk.com
Web: www.sandwell-uk.com
Saras Process Ltd
Duchess Street Ind. Estate
Duchess Street, Shaw
Oldham, Lancs OL2 7UT
Tel: 01706 845960
Fax: 01706 882403
Email: sales@sarasprocess.co.uk
Web: www.sarasprocess.co.uk
Contact: J. K. Gates
S.E.A. Member
SATA UK Ltd
15 Studlands Park Avenue
Newmarket, Suffolk CB8 7AU
Tel: 07894 606749
Fax: 0845 6037086
Email: matt.stevens@sata.com
Web: www.sata.com
Contact: Matt Stevens
Satchrome Ltd
Birchills House Ind. Estate
Green Lane, Walsall
W. Midlands WS2 8LF
Tel: 01922 622721
Fax: 01922 625353
Email: admin@satchrome.co.uk
Web: www.satchrome.co.uk
Scangrit
Eastfield Road
South Killingholme
Immingham DN40 3NF
Tel: 01469 574715
Fax: 01469 571644
Email: sales@scangrit.co.uk
Web: www.scangrit.co.uk
Contact: Mark Graves
Schloetter Co Ltd
Abbey Works, New Road
Pershore, Worcs WR10 1BY
Tel: 01386 552331
Email: sales@schloetter.co.uk
Web: www.schloetter.co.uk
Contact: Phil Norton
I.M.F./S.E.A. Member
SCHWING Technologies
GmbH
Oderstr. 7
47506 Neukirchen-Vluyn
Germany
Tel: +49 2845 930 0
Fax: +49 2845 930 100
Web: www.schwing-technologies.
com
SciMed Ltd
Unit B4
The Embankment Business Park
Vale Road
Heaton
Mersey SK4 3GN
Tel: 0161 442 9963
Email: enquiries@scimed.co.uk
Web: www.scimed.co.uk
Contact: Paul Vanden Branden
SciMed is an expert supplier of
testing equipment (est. 40 years)
serving the finishing industries as
well as many others. Our products
include:
• Bowman XRF: purpose built
plating thickness XRF gauges.
Fast, reliable, flexible
configuration.
• SETARAM Thermal Analysis:
DSC, TGA, STA, TMA and
High temperatures.
• GAMRY Potentiostats: corrosion
testing.
Secomak Ltd
Unit 330, Centennial Park
Elstree
Herts WD6 3TJ
Tel: 020 8732 1300
Email: sales@secomak.com
Web: www.secomak.com
Contact: Sales Manager
SERFILCO International Ltd
Siemens Road
Northbank Ind. Estate
Manchester
M44 5AH
Tel: 0161 775 1910
Fax: 0161 775 3696
Email: global@serfilco.com
Web: www.serfilco.co.uk
Contact: Robert Sawyer
I.M.F./S.E.A. Member
2022 edition – Finishing Industries Yearbook

72 A-Z COMPANY INDEX
SFCHINA Exhibition Ltd. /
Sinostar-ITE International Ltd.
2101-2, 21/F., Jubilee Centre
42-46 Gloucester Road,
Wanchai
Hong Kong
Tel: +852 2865 0062
Fax: +852 2804 2256
Email: info@sinostar-intl.com.hk
Web: www.sfchina.net
Contact: Florence Ng
SGA Technologies Ltd
Shirehill
Saffron Walden
Essex
CB11 3AQ
Tel: 01799 513347
Fax: 01799 523064
Email: enquiries@sgatech.co.uk
Web: www.sgatech.co.uk
Contact: Steven De Zilva
S.E.A. Member
Technical Plating Specialists.
Supplying OEM customers for
Military, Aerospace, Oil & Gas,
Scientific, Medical and Industrial.
Trading since 1969. UK based.
Quality: ISO 9001 & ISO
14001 accredited.
Finishes: Gold (hard, pure,
immersion), Silver - electronics
grade. Electroless Nickel Med.
Phosphorous, Tin/Lead: 60/40
Bright, Culmo Tin Bright, Copper.
Jig / barrel / selective plating all
offered.
Sharmic Engineering Ltd
Baldwin Road
Stourport-On-Severn
Worcs
DY13 9AX
Tel: 01299 878123
Email: info@sharmic.co.uk
Web: www.sharmic.co.uk
Contact: Garry Edwards
Sharmic Engineering manufacture
and supply new and used
vibratory finishing machines,
systems and consumables for the
surface treatment of components
in various materials. We offer a full
nationwide sales/technical/repair
and subcontract service. Full
details of our products can be
found on our website at
www.sharmic.co.uk
Shaw Trust Industries
Cedar Road, Balby
Doncaster, S. Yorks DN4 9HT
Tel: 01302 854531
Fax: 01302 852338
E: peter.smith@shaw-trust.org.uk
W: www.shawtrustindustries.com
Contact: Pete Smith
Sherwin-Williams UK Ltd
General Industrial Facility
Unit 3, Wharton Street Ind. Estate
Wharton Street, Aston
Birmingham B7 5TR
Tel: 0121 328 5227
Sherwin-Williams UK Ltd
Protective & Marine Coatings
Tower Works, Kestor Street
Bolton BL2 2AL
Tel: 01204 521771
Fax: 01204 382115
Email: sales.uk@sherwin.com
Web: www.protectiveemea.
Web: sherwinwilliams.com
Sherwin-Williams UK Ltd
General Industrial Division
Goodlass Road, Speke
Liverpool L24 9HJ
Tel: 0151 486 0486
Fax: 0151 486 0484
Email: john.bagley@sherwin.com
Sherwin-Williams UK Ltd
Industrial Wood Division
A1 Business Park, Knottingley
West Yorks WF11 0BU
Tel: 01977 673363
Fax: 01977 673521
Web: www.oem.sherwin-williams.eu
www.sayerlack.co.uk
Shropshire Powder Coaters
Units 12 & 13 Maes-y-Clawdd
Maesbury Road Ind. Estate
Oswestry, Shropshire SY10 8NN
Tel: 01691 670757
Fax: 01691 670636
Web: www.shropshirepowder
coaters.co.uk
G.A. Member
Siebec UK Ltd
Unit 3, St. Albans Business Park
St. Albans Road
Stafford
Staffs ST16 3DR
Tel: 01785 227700
Fax: 01785 246006
Email: sales@siebec.co.uk
Web: www.siebec.co.uk
I.M.F./S.E.A. Member
SIFCO ASC
Units 12-14
Aston Field Trading Estate
Bromsgrove
Worcs B60 3EX
Tel: 01527 557740
Fax: 01527 832856
Email: plating@sifco.co.uk
Web: www.sifcoasc.co.uk
Contact: Mark Dorgan, Technical
Sales Manager
Signs & Plastic Products Ltd
The Pearson Building
Bright Street
Middlesbrough TS1 2AA
Tel: 01642 246087
Fax: 01642 246088
Web: www.spp.uk.com
Silchrome Plating Ltd
Barras Garth Road
Leeds LS12 4JW
Tel: 0113 263 7808
Fax: 0113 263 2382
Email: sales@silchrome.co.uk
Web: www.silchrome.co.uk
I.M.F./S.E.A. Member
SLF Oberflachentechnik
GmbH
Gutenbergstrasse 10
D-48282 Emsdetten
Germany
Tel: +49 2572 1537-0
Fax: +49 2572 1537-169
Email: info@slf.eu
Web: www.slf.eu
SLF UK
15 Wingbury Courtyard
Wingrave
Bucks HP22 4LW
Tel: 0843 507 0030
Email: rm@candsequipment.
co.uk
Web: www.slf.co.uk
Contact: Richard Melville
Snell & Prideaux Ltd
68 Thomas Street
Aston, Birmingham B6 4TN
Tel: 0121 333 4855
Email: info@SandP.uk.com
Web: www.SandP.uk.com
Solutex Ltd
Unit 1, Ellesmere Business Park
Ellesmere
Shropshire SY12 0EW
Tel: 01691 622225
Fax: 01691 622277
Email: info@solutex.co.uk
Web: www.solutex.co.uk
SPA Aluminium Ltd
Unit 1, Chapman Way
Tunbridge Wells
Kent TN2 3EG
Tel: 01892 533911
Email: sales@spaaluminium.co.uk
Web: www.spaaluminium.com
Spang Power Electronics
9305 Progress Parkway
Mentor
Ohio 44060
USA
Tel: +1 440 352 8600
Fax: +1 440 352 8630
Email: spesales5@spang.com
Web: www.spangpower.com
Contact: Sales Department
SPCB UK Ltd
Unit 4 Glebe Farm
Scampton
Lincs LN1 2SZ
Tel: 01673 895130
Email: info@spcb.co.uk
Web: www.spcb.co.uk
Specialist Coatings Ltd
Faverdale Ind. Estate
Darlington
County Durham
DL3 0PP
Tel: 01388 774034
Fax: 01388 777010
Email: enquiries@almitgroup.
co.uk
Web: www.almitgroup.co.uk
Contact: Alan Roberts
Specialist Lab Salt Ltd
Leintwardine
Craven Arms
Shropshire SY7 0NB
Tel: 01547 540573
Fax: 01547 540412
Email: sales@specialistlabsalt.com
Web: www.specialistlabsalt.com
Contact: Mandy Cooper
Specialist Lab Salt Ltd is Europe’s
leading specialist supplier of UKAS
certified salt for Salt Spray and
Corrosion Tests to ISO 9227,
ASTM B117 and other
International Standards
Spectrum Powder Coaters Ltd
High March
Daventry
Northants NN11 4QE
Tel: 01327 704433
Fax: 01327 877875
Email: sales@spectrumpowder
coaters.com
Web: www.spectrumpowder
coaters.com
Finishing Industries Yearbook – 2022 edition

A-Z COMPANY INDEX 73
SPL Blacking Ltd
420 Thurmaston Boulevard
Leicester
LE4 9LE
Tel: 0116 223 6100
Email: office@splblacking.co.uk
Web: www.splblacking.co.uk
Spooner Industries
Railway Road
Ilkley
LS29 8JB
Tel: 01943 609505
Web: www.spooner.co.uk
Spray Direct @ Sealpump Ltd
The Innovation Centre
Vienna Court
Kirkleatham Business Park
Redcar
Cleveland TS10 5SH
Tel: 01642 777750
Fax: 01642 777730
Email: sales@spray-direct.com
Web: www.spray-direct.co.uk
Spray Finishers Metalblast
14 Abingdon Road
Poole
BH17 0UG
Tel: 01202 685488
Email: accounts@sprayfinishers
metalblast.co.uk
Spraylat International Ltd
1 Bardsley Road
Earlstrees Ind. Estate
Corby
Northants
NN17 4AR
Tel: 01536 408409
Email: enquiries@spraylat.co.uk
Web: www.protectapeel.co.uk
Stainless Finishing Services
Ltd
Unit 3, Soho Works
Saxon Road
Sheffield
S8 0XZ
Tel: 0114 273 8216
Email: sales@stainlessfinishing.
co.uk
Web: www.stainlessfinishing.co.uk
Contact: Phil Marsden
Standard Industrial Cleaning
Systems Ltd
Kintrave
Meadow Court
Mollington
Chester CH1 6NR
Tel: 01244 851652
Email: info@standardindustrial.
co.uk
Web: www.standardindustrial.
co.uk
Contact: Anne Greenlees
Stanhope-Seta
London Street
Chertsey
Surrey KT16 8AP
Tel: 01932 564391
Fax: 01932 568363
Email: sales@stanhope-seta.co.uk
Web: www.stanhope-seta.co.uk
Star Anodising & Finishing
Unit 7 Power Works Ind. Estate
Slade Green
Erith DA8 2HY
Tel: 01322 335857
Fax: 01322 335868
Email: mail@staranodising.co.uk
Web: www.staranodising.co.uk
Static Coatings 2000 Ltd
12 Ash Grove
Stourbridge
W. Midlands DY9 7JL
Tel: 07811 977465
Fax: 01384 375774
Email: mike.brownhill@sky.com
Web: www.staticcoatings.com
Staubli UK Ltd
Staubli House
Hadley Park East
Telford TF1 6QJ
Tel: 01952 671917
Email: robot.uk@staubli.com
Web: www.staubli.com
Contact: Simon Jenkins
Steelstrip Services Ltd T/A
Servosteel
Pensnett Road
Dudley
W. Midlands
DY1 2HA
Tel: 01384 471371
Web: www.servosteel.com
S.E.A. Member
Stewart Gill Conveyors Ltd
Unit 4 Brooks Business Park
Brookhampton Lane
Kineton
Warwickshire CV35 0JA
Tel: 01926 641424
Email: info@stewart-gill.co.uk
Web: www.stewart-gill.co.uk
Contact: Gerard den Hartog
John Stokes (Hard Chrome
Plating & Grinding) Ltd
60 High Street
Princes End
Tipton
W. Midlands DY4 9HP
Tel: 0121 520 6301
Email: enquiries@stokeschrome.
co.uk
Web: www.johnstokeschrome.
co.uk
S.E.A. Member
Stowlin Croftshaw Ltd
Radnor Road
South Wigston
Leicester LE18 4XY
Tel: 0116 278 5373
Fax: 0116 277 2616
Web: www.stowlin.com
STS Ltd
255 Station Road
Balsall Common
Coventry CV7 7EG
Tel: 07884 263080
Fax: 01676 532620
Email: bob@stsheaters.com
Web: www.stsheaters.com
Contact: Bob Steel
Sumari Business Systems Ltd
Chandos Business Centre
87 Warwick Street
Royal Leamington Spa
Warks CV32 4RJ
Tel: 0121 244 8111
Email: su@sumari.co.uk
Email:ian@sumari.co.uk
Web: www.sumari.co.uk
Contact: Su Chadda/Ian
Desjarlais
Supreme Surface Treatment
Engineering Ltd
Little Burton West
Burton Upon Trent
Staffs DE14 1PP
Tel: 01283 529314
Fax: 01283 529316
Email: sales@supreme-eng.com
Web: www.supreme-eng.com
Contact: Mark Jackson
Supreme Visors Ltd
Unit 2 Astonfields Road
Whitehouse Ind. Estate
Runcorn
Cheshire WA7 3DL
Tel: 01928 791800
Fax: 01928 791810
Email: technical@supremevisors.
com
Web: www.supremevisors.com
Surface Technology
Long Causeway
Cross Green
Leeds LS9 0NY
Tel: 0845 4500 870
Email: info@surfacetechnology.
co.uk
Web: www.surfacetechnology.
co.uk
Contact: Stephen Blevins, Sales
Manager
Swinton Electro Plating Ltd
Royal Oak Works
Oak Street
Swinton
Manchester
M27 4FL
Tel: 0161 794 8426
Fax: 0161 794 0155
Email: sales@swintonplating.com
Web: www.swintonplating.com
Contact: Stuart Logan
Tamworth Heat Treatment Ltd
7 Darwell Park
Amington Ind. Estate
Tamworth
Staffs B77 4DR
Tel: 01827 318030
Email: sales@tamworth-heat.co.uk
Web: www.tamworth-heat.co.uk
S.E.A. Member
Tata Steel
Shotton Works
Deeside
Flintshire CH5 2NH
Tel: 01244 892434
Fax: 01244 892321
Email: colorcoat.connection@
tatasteeleurope.com
Web: www.tatasteelconstruction.
com
Contact: Colorcoat Connection
helpline
Teal & Mackrill Ltd
Lockwood Street
Hull
HU2 0HN
Tel: 01482 320194
Web: www.teamac.co.uk
Tecan Ltd
Tecan Way
Granby Ind. Estate
Weymouth
Dorset
DT4 9TU
Tel: 01305 765432
Email: sales@tecan.co.uk
Web: www.tecan.co.uk
Contact: Neil Walker - Managing
Director
I.M.F. Member
Tecan is a member of the Muon
Group which solves customers
design challenges with the micro
fabrication of high precision metal
parts. Our primary process is
centric to chemical etching and
SMT Stencils. Tecan is a leader in
electroplating with a wide range
of material capabilities including
electroless nickel, copper, tin, gold,
silver, and phosphorous nickel
plating. We also offer in-house
finishing services such as anodising,
passivation and insulation.
2022 edition – Finishing Industries Yearbook

74 A-Z COMPANY INDEX
Technicis Filtration
3 Rue de Thessalie
F-44240
France
Tel: +33 2 40 72 86 02
Fax: +33 2 40 72 86 58
Email: technicis@technicis.com
Web: www.technicis.com
Contact: Mr Julien Blanchard
Techniques Surfaces (UK) Ltd
Wood Lane
Erdington
Birmingham
B24 9QL
Tel: 0121 382 8060
Fax: 0121 377 8928
Email: enquiries@ts-uk.com
Web: www.techniques-surfaces.
uk.com
Contact: Mark Florance
S.E.A. Member
Techniques Surfaces UK Ltd.
(TSUK) is the leading UK supplier
of HEF’s Controlled Liquid Ionic
Nitriding processing, having the
largest processing capacity within
the UK and offering the full range
of HEF-Durferrit nitro-carburising
processes, ARCOR, SURSULF &
TUFFTRIDE, as well as the highly
regarded TS CARBIDE Va/Nb
carbide diffusion process.
Technispray Paints Ltd
Catherine St.
Birmingham
B6 5RS
Tel: 0121 326 8020
Fax: 0121 327 1507
Email: info@kolorbond.co.uk
Web: www.kolorbond.co.uk
Teign Metal Finishes
Unit 11 Milber Trading Estate
Newton Abbot
Devon
TQ12 4SG
Tel: 01626 362873
Email: jim@teignmetalfinishes.
co.uk
Web: www.teignmetalfinishes.
co.uk
Tente Castors Ltd
100 Papyrus Road
Werrington Parkway
Peterborough
Cambs PE4 5HN
Tel: 01733 578111
Email: info.uk@tente.com
Web: www.tente.co.uk
Tewkesbury (Diamond
Chrome) Plating Co. Ltd
Northway Lane, Newtown
Tewkesbury, Glos GL20 8HA
Tel: 01684 292132
Email: sales@tdcp.co.uk
Web: www.tdcp.co.uk
Contact: George Todd
S.E.A. Member
Thermacure Ltd
Unit 3 Pioneer Ind. Estate
Wigan, Lancs WN5 9DN
Tel: 01942 221945
Email: paul@thermacure.co.uk
Web: www.thermacure.co.uk
Contact: Paul Kershaw
Thermaset Ltd
Claire Works, Anders
Lichfield Road Ind. Estate
Tamworth, Staffs B79 7TA
Tel: 01827 55777
Fax: 01827 53713
Email: mail@thermaset.co.uk
Web: www.thermaset.co.uk
Thermo Catalytic Systems Ltd
Unit 1B
Brown Lees Road Ind. Estate
Forge Way, Knypersley
Staffs ST8 7DN
Tel: 01782 511880
Email: thermocatsys@aol.com
Web: www.thermocatalytic.com
The Wheel Specialist
The Cow Shed
Packwood Lane
W. Midlands B94 6AU
Tel: 01564 784991
Email: twshead@thewheel
specialist.co.uk
Web: www.thewheelspecialist.
co.uk
Contact: Jack Murphy
I.M.F. Member
Thomas Fattorini Ltd
Regent Street Works
Birmingham B1 3HQ
Tel: 0121 236 1307
Email: sales@fattorini.co.uk
Web: www.fattorini.co.uk
Contact: Tom R. Fattorini
Three Spires Finishing
Systems Ltd
Unit 18C
Chasewater Heaths Business Park
Cobbett Road
Burntwood
Staffs WS7 3GL
Tel: 01543 277225
Email: info@threespiresfinishing.
co.uk
Web: www.threespiresfinishing.
co.uk
Total Coating Systems Ltd
24B Monarch Way
Loughborough
Leics LE11 5XG
Tel: 01509 237415
Email: sales@totalcoatingsystems.
com
Web: www.totalcoatingsystems.
com
Contact: Pete Stocks
Specialists in:
• Spray Booths
• Finishing Plant & Equipment
• Infra Red Rapid Cure Systems
• Spray Shop Accessories and
Product Coating Technology
Systems
Tregarne
Station Road
Braughing, Ware
Herts SG11 2PB
Tel: 01920 822505
Fax: 01920 822909
Web: www.gibbsfinishing.com
Web: www.woodwelder.co.uk
Triab/Tri Innovations AB
Alegardsgatan 3
SE 431 50 Molndal
Sweden
Tel: +46 31 272130
Fax: +46 31 878838
Email: info@triab.com
Web: www.triab.com
TricornDNAsp
Oak Park, Heath Lane
Crondall
Farnham
Surrey GU10 5PB
Tel: 01252 855290
Email: sales@tricorn.tech
Web: www.tricorn.tech
Trident Powders Ltd
Unit L1-L2, Grafton Way
West Ham Ind. Estate
Basingstoke
Hants RG22 6HY
Tel: 01256 357348
Email: info@tridentpowders.com
Web: www.tridentpowders.com
Contact: Sales
Trimite Global Coatings
Eagle Road
Redditch B98 9HF
Tel: 01527 599460
Email: groupinfo@trimite.com
Web: www.trimite.com
Trion Industries Inc.
297 Laird Street
Wilkes-Barre
PA 18702-6997
USA
Email: info@triononline.com
Web: www.triononline.com
Turbex Ltd
Component Cleaning Technology
Centre
Unit 1, Riverwey Ind. Park
Newman Lane
Alton, Hants GU34 2QL
Tel: 01420 544909
Email: sales@turbex.co.uk
Web: www.turbex.co.uk
Contact: John Huntingdon
T & W Fabrications & Co
Unit 26B
Midland Road Ind. Estate
Swadlincote
Derbyshire DE11 0AN
Tel: 01283 224671
Fax: 01283 550671
Email: tandwfabs@onebillnet.
co.uk
Contact: Annie Wesson
Twickenham Plating Group
Ltd
Pender Works
12-13 Balena Close
Creekmoor
Dorset BH17 7DB
Tel: 01202 692416
Fax: 01202 600628
Email: info@twickenham.co.uk
Web: www.twickenham.co.uk
Contact: Jonathan Hill
I.M.F./S.E.A. Member
UK Flowtechnik Ltd
1 Central Park
Lenton Lane
Nottingham NG7 2NR
Tel: 0115 901 7111
Email: sales@ukflowtechnik.com
Web: www.ukflowtechnik.com
Ultrawave Ltd
Eastgate Business Park
Wentloog Avenue
Cardiff CF3 2EY
Tel: 029 20 837 337
Email: sales@ultrawave.co.uk
Web: www.ultrawave.co.uk
Umicore Galvanotechnik
GmbH
Klarenbergstr. 53-79
D-73525 Schwaebisch Gmuend
Germany
Tel: +49 7171 607-01
Fax: +49 7171 607 316
Email: galvano@eu.umicore.com
Web: www.ep.umicore.com
Finishing Industries Yearbook – 2022 edition

Celebrating 30 years
New look, Same quality
Expertss in t‘e dessign and manuffacture off quality ultrassonic cleaning ssysstemss
With ultrasonic cleaning units ranging from 1.5 litre bench-top to our 1000 litre Argon, you can
be sure that you can find a solution to suit cleaning needs. Ultrasonic cleaning removes
contaminants from crevices and other hard to reach areas thoroughly and quickly, increasing
throughput and cleaning quality of your components.
Product Spotlight: IND Series
Robust and reliable, delivering effective
cleaning results for all manufacturing,
processing and maintenance applications..
Available from 32 to 144 litres
Product Spotlight: Neon Series
The integrated re-circulation system minimises fluid
contamination even after cleaning, reducing running costs and
improving component cleanliness. the clever modular design
allows easy retrofitting of additional wash, rinse and drying stages
to be specified. Available from 35 to 125 litres.
Product Spotlight: Argon Series:
Outstanding cleaning performance, cost saving and
environmental benefits for processing large components or
multiple batches. Incorporates integrated re-circulation
system. Designed for manufacturing and processing
industries.. Available from 250 to 1000 litres.
Call us today to arrange a free, no obligation test clean 0845 330 4236
Reg. 2558071
GB 827 111 60
ww.ultrawave.co.uk

76 A-Z COMPANY INDEX
Unic International
338 Colwick Road
Nottingham NG4 3BT
Tel: 0115 947 4000
Fax: 0115 950 6666
Email: sales@unic.co.uk
Web: www.unic.co.uk
Univertical LLC
203 Weatherhead Street
Angola
IN 46703, USA
Tel: +1 260 665 1500
Web: www.univertical.com
Urban Hygiene Ltd
Unit 9, Delta Court
Sky Business Park
Robin Hood Airport
Doncaster DN9 3GN
Tel: 01302 623193
Fax: 01302 623167
Email: enquiries@urbanhygiene.
com
Web: www.urbanhygiene.com
Ureka Global Ltd
7 Flowers Hill, Brislington
Bristol BS4 5JJ
Tel: 0117 971 1364
Fax: 0117 972 3838
Email: sales@thenamethatsticks.
com
Web: www.thenamethatsticks.com
Vapormatt Ltd
Vapormatt Innovation Centre
Robins Drive, Bridgwater
Somerset TA6 4DL
Tel: 01823 257976
Email: sales@vapormatt.com
Web: www.vapormatt.com
Vapor-Tek Ltd
Fairclough Street
Bolton BL3 2AF
Tel: 01204 521795
Email: info@vapor-tek.co.uk
Web: www.vapor-tek.co.uk
VDMA Surface Treatment
Technology
Lyoner Str. 18
D-60528 Frankfurt
Germany
Tel: +49 69 6603 1291
Fax: +49 69 6603 2291
Email: oberflaeche@vdma.org
Web: http//ot.vdma.org
Contact: Dr Martin Riester
Vecom Sillavan Metal
Treatments Ltd
Wood Street
Bury
Lancs BL8 2SL
Tel: 0161 797 6666
Web: www.vecom-group.com
Verotapes
Chesterfield
Derbyshire S42 5EB
Tel: 07799 527890
Email: ian.mcqueen@verotapes.
com
Contact: Ian McQueen
Vixen Surface Treatments Ltd
73 Jay Avenue
Teesside Ind. Estate
Thornaby-on-Tees TS17 9LZ
Tel: 01642 769333
Web: www.vixen.co.uk
voestalpine Bohler Welding
European Business Park
Oldbury
W. Midlands B69 2BN
Tel: 0121 569 7700
Email: welding.uk@voestalpine.
com
Web: www.voestalpine.com/
welding
Contact: Sales Office
Vohras International
F-19/10 Krishna Nagar
Delhi 110051, India
Tel: +91 9212004471
Email: metalfinishing@yahoo.co.in
Web: http://www.finishing
machines.com
Voltec Gun Systems Ltd
B9 Pemberton Business Center
Richmond Hill
Wigan WN5 8AA
Tel: 07896 738054
Email: evanspaintplant@aol.com
Web: www.voltecgunsystems.
co.uk
VORTI-SIV/MM Industries, Inc.
36135 Salem Grange Rd.
P.O. Box 720, Salem
Ohio 44460, USA
Tel: +1 330 332 4958
Fax: +1 330 332 1543
Email: info@vorti-siv.com
Web: www.vorti-siv.com
Wagner Spraytech (UK) Ltd
a Member of WAGNER GROUP
Innovation Centre
Silverstone Park
Silverstone NN12 8GX
Tel: 01327 368410
Email: enquiries@wagner-group.
com
Web: www.wagner-group.com
S.E.A. Member
Wehrle Environmental Ltd
Bloxham Mill Business Centre
Barford Road
Bloxham
Banbury
Oxfordshire
OX15 4FF
Tel: +44 (0)7818 589460
Email: info@wehrle.co.uk
Web: www.wehrle-werk.de/en
Contact: Amrit Barmi
W H Darby Ltd
16 Well Street
Hockley
Birmingham B19 3BJ
Tel: 0121 554 9817
Fax: 0121 523 3585
Email: info@whdarby.co.uk
Web: www.whdarby.co.uk
Whitehall Recruitment Ltd
Eden House Business Centre
Enterprise Way
Edenbridge
Kent TN8 6HF
Tel: 01732 864777
Email: info@whitehall.uk.com
Web: www.whitehall.uk.com
Contact: Veronica Wright
Winn & Coales (Denso) Ltd
33-35 Chapel Road
London
SE27 0TR
Tel: 0208 670 7511
Fax: 0208 761 2456
Email: mail@denso.net
Web: www.denso.net
Wire Mesh Fabrications
2 Swan Meadow Mill
Swan Meadow Road
Wigan
WN3 5BD
Tel: 01942 496002
Fax: 01942 230868
Email: info@wiremeshfabs.co.uk
Web: www.wiremeshfabs.co.uk
Contact: Wes Weyes
We offer a bespoke
manufacturing service to create
products designed for specific uses
in sectors such as food & drink,
medical & pharmaceutical,
automotive and maintenance as
well as general domestic sectors.
We can offer small or large batch
quantities and pride ourselves to
deliver cost-effective, quality
solutions to our customers.
Wisconsin Oven Corporation
2675 Main Street
P.O. Box 873
East Troy
Wisconsin 53120
USA
Tel: +1 262 642 3938
Fax: +1 262 207 5107
Email: sales@wisoven.com
Web: www.wisoven.com
Witham Oil & Paint
(Lowestoft) Ltd
5-6 Newcombe Road
Lowestoft
Suffolk
NR32 1XA
Tel: 01502 563434
Email: enquiries@withamgroup.
co.uk
Web: www.withamgroup.co.uk
Wychwood Water Systems
Ltd
Unit K, Country Park
Avenue Two
Station Lane
Witney
Oxon
OX28 4YD
Tel: 01993 892211
Fax: 01993 892212
Email: service@wychwood-water.
com
Web: www.wychwood-water.com
Contact: Peter Wood
X-Rite Pantone
9a MIOC
Styal Road
Wythenshawe
Manchester
M22 5WB
Tel: 01625 871100
Fax: 01625 871444
Web: www.xrite.com
Zinco International Ltd
Westfields Trading Estate
Hereford
HR4 9NS
Tel: 01432 376137
Email: info@zincointernational.
com
Web: www.zincointernational.com
Zinga-UK Ltd
1 Timberlaine Estate
Gravel Lane,
Chichester
W. Sussex
PO19 8PP
Tel: 01243 770726
Fax: 01243 533422
Email: sales@zinga-uk.com
Web: www.zinga-uk.com
Finishing Industries Yearbook – 2022 edition

TRADE NAMES 77
Trade Names
Description of products by their trade name and supplier.
Full contact details can be found in the A-Z Company Index
on page 48.
Aquus CL-one
Water Based concentrated
cleaner.
Enviro Tech (Europe) Ltd
B-Gon ® - Mist Eliminator pads
3-dimensional structured
thermoplastic composite media.
99% efficiency. Low pressure
drop. Custom fabrication.
Cleanable and reusable.
Kimre, Inc.
Driftor ®
Mist Eliminator, engineered to
collect liquid away from gas
stream using our polypropylene
material.
Kimre, Inc.
EXITFLEX
40 years experience in supplying
quality industrial surface finishing
system components, accessories
and consumables.
EXITFLEX supplied by
Polyhose UK Ltd
Fiber-bed Filters/Candle filters
High efficiency mist eliminators
used to trap, collect and remove
liquid and soluble matter
suspended in the gas stream.
Kimre, Inc.
GALVATHERM ®
Versatile Teflon ® heaters, flat or
cylindrical available in FEP, PFA,
and dual coated for most acid and
alkaline applications.
GMF Equipment
Haviland Ltd
Haviland produce the Saracen
Oven range incorporating air
recirculation and radiant ovens
booth gas and electric in standard
sizes and bespoke configurations
for paint finishing and process
work.
Haviland Ltd
Liqui Nomex ®
Polishing of liquid streams to
remove contaminant liquids to
meet any industry..
Kimre, Inc.
Niline
A grained stainless steel ‘look-alike’
finish.
Nottingham Platers Ltd
Nipearl
A more durable pearl finish in
nickel or chrome.
Nottingham Platers Ltd
Nisheen
A brushed stainless steel ‘look a-
like’ finish.
Nottingham Platers Ltd
Nylon-D
Nylon powder for dip method.
Nylon Colours Ltd
Nylon-R
Nylon powder for electrostatic
spray method.
Nylon Colours Ltd
ProSolv 5408e
Precision vapour degreasing
solvent near zero ODP & GWP.
Enviro Tech (Europe) Ltd
ROTKAPPE ®
Removable core immersion
heaters available in porcelain,
quartz glass, technical glass, PTFE,
stainless steel & titanium covering
most applications.
GMF Equipment
Saras Process
Portable brush plating equipment
& solutions.
Saras Process Ltd
SuperCORR-A
Water displacement and corrosion
prevention.
Enviro Tech (Europe) Ltd
AUTOMOTIVE
INDUSTRY
AGRICULTURE &
CONSTRUCTION
VOLKSWAGEN
DAIMLER
AUDI
BMW
Room Temperature
BLACKING
JOHN DEERE
PALFINGER
LIEBHERR
CLAAS
HOME APPLIANCE
& ELECTRONICS
ELECTROLUX
WHIRLPOOL
PHILIPS
AEG
So simple to do in-house
BLACKFAST
for the best BLACK finish
BLACKFAST CHEMICALS
Unit 5 Russell House, Molesey Road, Walton-on-Thames, Surrey KT12 3PE
Tel: 0208 339 7370 • Fax: 0208 339 7371
sales@ blackfast.com • www.blackfast.com
blackfast chemicals_full page_FNGYB21.indd 1 15/10/2020 15:05
GRUNDFOS
SIEMENS
MAERSK
SEW
GENERAL
INDUSTRY
JUNGHEINRICH
SKODA AUTO
MARTINREA
DANA
MATERIALS
HANDLING
Worldwide conveyor solutions -
simply perfect.
Kon-Tane Scrubber ® /Tower
Packing
Ladder-like filament, resistant and
strong yet flexible for easy
installation. Improve transfer in
vertical towers.
Kimre, Inc.
SYNOTHERM ®
Pillow plate heat-exchangers,
available in 3 grades of sta