SPORTSTER S PARTS

. t- 

New Night Rod Style Headlamp Mask 

• Made of ABS with laser cut steel brackets 

• Night-Rod style look with a bit lower mounted headlight 

• Ready to paint finish or gloss black 

• Perfect fit and hassle free mounting 

Fitment: 21-22 Sportster S RH1250S , Certification: 

Approved, Position: Front, Material: ABS, Unit: Set, Qty.: 1.0 

PART# COLOR FINISH DESCRIPTION 

921658 Ready To Paint For use with OE Headlight 

921660 Ready To Paint Including LED Headlight 

921659 Black Gloss For use with OE Headlight 

921661 Black Gloss Including LED Headlight 

Sportster S Handlebar Side Mount Turn Signals 

Rick’s Motorcycles manufactures Sportster S model fitting 

handlebar-tip turn signals which offer a super-clean look and 

are almost invisible! Manufactured from high-grade aluminum 

the CNC-machined brackets hide the cables inside the handlebar 

tube. Indicators are Atto Integral by Kellermann, fixed inside the 

housing. With ECE approval these indicators are street legal and 

can be used all over Europe. 

921456 Fitment: 21-22 Sportster S RH1250S , Color: Black, Finish: 

Powder Coated, Glass Color: Clear, Bezel Color: Black, 

Certification: E-Approved, Lighting Type: LED, Unit: Pair, 

Qty.: 1.0 

Sportster S Headlamp Fairing 

Rick’s Motorcycles a distinctive headlight mask for the Sportster 

S, highlighting the sportive and clean look. The mask perfectly 

surrounds the stock headlight lines. Rick’s headlight mask is 

elaborately handcrafted and easy to install. 


Raw, Material: Fibre Glass, Unit: Each, Qty.: 1.0 

Sportster S Rear Turn Signal Bracket without 

Turn Signals 

For Sportster S model year 2021-up, Rick’s Motorcycles produces 

a rear indicator bracket that is mounted under the stock tailend. 

This kit is available without the pictured Kellermann Atto DF 

3in1 (available separately). A red reflector is recessed into the 

black coated housing. Existing stock mounting points are used for 

installation. Installation material is included in the kit. 


Powder Coated, Certification: E-Approved, Unit: Each, 

Qty.: 1.0 

2

. t- 

Sportster S LED Turn Signal/Taillight/Brake Light 

Cult-Werk LED lighting set 3in1 incl. bracket suitable for Harley- 

Davidson ® Sportster S models from 2021! The bracket on which 

the LED 3in1 lighting including the E-mark is attached was made 

of steel and then powder-coated in glossy black. The lighting unit 

is required if you remove the original lighting bracket and use 

a side license plate holder. The holder is screwed to the original 

mounting points in the rear part using the mounting material 

provided. Then the wiring of the LED lighting has to be carried 

out! 

921662 Fitment: 21-22 Sportster S RH1250S , Color: Black, 

Glass Color: Smoke, : Including Bracket, Certification: 

E-Approved, Lighting Type: LED, Unit: Pair, Qty.: 1.0 

Sportster S Front Turn Signal Bracket without 

Turn Signals 

These brackets allow to mount Kellermann Atto or similar turn 

signals to be mounted underneath the handlebar controls. The 

brackets are black powder-coated and are delivered in pairs. 


Powder Coated, Unit: Pair, Qty.: 1.0 

2 in 2 Sportster S Muffler Set 

Directly coming from our race experience this new product is a 

semi full system 2 in 2 with a central balancing pipe, the pipework 

is fully stainless steel made TIG welded, the 2 mufflers are from 

the TRACKER series in brushed stainless steel with a carbon fiber 

endcap. 

The EURO5 homologation is obtained by the use of 2 catalyst 

converters in the central pipes. 

The deep tone of the sound, as all the V-PERFORMANCE exhausts, 

is guaranteed by the special feature of the inner cartridge. 

Great news also for the plate holder, a steel laser-cut piece to 

relocate the license plate under the tail and give to the new 

Harley a real racing style touch. 

Fitment: 21-22 Sportster S RH1250S , : Endcap Tracker 

Carbon, Certification: Euro 5, Material: Stainless Steel, Unit: 

Set, Qty.: 1.0 

PART# COLOR FINISH 

922028 Satin 

922029 Black Ceramic Coated 

Racing Mid Pipe without Catalyst 

Using the racing mid-pipe without catalyst the motorcycle may 

only be used on closed terrain such as race tracks. 

922030 Fitment: 21-22 Sportster S RH1250S , Field of Application: 

Only for Race Track, Finish: Satin, : Sportster S, Material: 

Stainless Steel, Unit: Each, Qty.: 1.0 

Sportster S Beltguard 

The stock Sportster S belt guard ain’t a design highlight of this 

otherwise spectacular bike. Rick’s Motorcycles has developed a 

exchange belt guard which replaces „Bolt On“ the stock OEM 

component. Rick’s belt guards are made from stainless steel and 

finished in black powder coated surface finish. The kit includes 

upper and lower belt guard. 


Powder Coated, Unit: Each, Qty.: 1.0 

3

922735 

922736 

922737 

Sportster S Sprocket and Front Pulley Cover 

Exclusive designed „open running“ front belt pulley, allowing to 

view the rotating pulley highlighted with a machined cover 

• Inner and outer cover for original/stock front sprocket 

• Stainlees steel outer cover 

• Form pressed and 3D lasered 

• Powder coated black 

• Bi-Color front Pulley cover 

• CNC machined 

• Made from high grade aluminum 

• Black anodized and laser engraved 

• Easy installation 

• Delivery in a set, including both parts 

• Including installation hardware 

• Made in Germany 

922723 Fitment: 21-22 Sportster S RH1250S , Color: Black, Unit: 

Kit, Qty.: 1.0 

Sportster S Upper Fork Stem Cover 

• Design cover for upper fork stem 


• Aluminum 

• Black matt powdercoated 

• Sold in pairs 




Fitment: 21-22 Sportster S RH1250S , Color: Black, Finish: 

Satin, Material: Aluminium, Unit: Pair, Qty.: 1.0 

PART# 

DESCRIPTION 

922735 Smooth, without Ricks Logo 

922736 Small, without Ricks Logo 

922737 Premium, with Ricks Logo 

. t- 

Lower Fork Cover 

• Our covers are made of high-quality aluminum 

• Milled on the most modern 5-axis machining centers 

• Powder-coated in black gloss 

• Just to be pushed over the fork tube and tightened 

921649 Fitment: 21-22 Sportster S RH1250S , Color: Black, 

Finish: Gloss, Powder Coated, Position: Lower, Material: 

Aluminium, Unit: Pair, Qty.: 1.0 

Front Axle Cover 

• Available with or without CWC logo 


Gloss, Powder Coated, Position: Front, Material: Aluminium, 

Unit: Pair, Qty.: 1.0 

PART# 

. t- 

DESCRIPTION 

921644 Without Cult Werk logo 

921645 With Cult Werk logo 

4

. t- 

Rear Axle Cover 

• Available with or without CWC logo 

• Hides the dull OEM axle ends 


Gloss, Powder Coated, Position: Rear, Material: Aluminium, 

Unit: Pair, Qty.: 1.0 

PART# 

DESCRIPTION 

921646 Without Cult Werk logo 

921647 With Cult Werk Logo 

. t- 

Swingarm Cover 


Anodized, Material: Aluminium, Unit: Pair, Qty.: 1.0 

Sportster S Rear Axle Cover 

• Design covers rear axle 


• Aluminum 

• Black anodized 







PART# 

DESCRIPTION 



922724 

922730 

922727 

922731 

Sportster S Front Axle Cover 

• Design cover for front wheel axle 


• Aluminium 








PART# 

DESCRIPTION 



Sportster S Swing Arm Axle Cover 

• Design cover swingarm axle 


• Aluminum 








PART# 

DESCRIPTION 



5

Smooth Sportster S Cover Kit 

Kit includes: 

• Smooth Fork Stem Cover 

• Smooth Front Axle Cover 

• Smooth Rear Axle Cover 

• Smooth Swing Arm Axle Cover 


Satin, Unit: Kit, Qty.: 1.0 

Premium Sportster S Cover Kit 

Kit includes: 

• Premium Fork Stem Cover 

• Premium Front Axle Cover 

• Premium Rear Axle Cover 

• Premium Swing Arm Axle Cover 

• Premium Rear Shock Adjustment Turning Knob 

• Premium Spacer Front Wheel right side 

• Premium Radiator Cap 


Satin, : with Ricks Logo, Unit: Kit, Qty.: 1.0 

Premium Sportster S Rear Shock Adjustment 

Knob 

• High-end machined Premium Design knob replaces the stock 

plastic adjustment knob 

• Precice settings through optimized adjustment abilities 


• Aluminum 


• Laser engraved 





Satin, : With Ricks Logo, Unit: Each, Qty.: 1.0 

6

Premium Sportster S Radiator Cap 

• Design cover, serves as high end exchange for stock radiator cap 

• CNC machined aluminum 


• Laser engraved 





Satin, : with Ricks Logo, Unit: Each, Qty.: 1.0 

Sportster S Front Wheel Spacer Right 

• Design spacer, perfectly suited to close the gap between wheel 

and fork right lower leg 


• Aluminum 


• Fits stock wheel and stock fork 


• Made in German 


Satin, Material: Aluminium, Unit: Each, Qty.: 1.0 

7

. t- 

Custom V1 Front Fender 

This front fender is shorter, narrower and makes the view of the 

front wheel free. In addition to account for the original metal 

holder. The mounting holes are designed as slots, so the fenders 

can be adjusted in height continuously so you can regulate the 

distance between. 


Approved, Position: Front, Material: ABS, Wheel /Tire ø: 17“, 

Unit: Each, Qty.: 1.0 


921640 Ready To Paint 

921641 Gloss Black 

Sportster S Front Fender 

• Fits standard OEM 160/70 17“ tires 

• Tight fit over the tire 

• Perfect addition to any conversion 

• Adapted to the radius of the front tire 

• With integrated protection for the fork tubes 

• Made of 2,0 mm steel 

• High torsion strength 

• 3D laser cut, maximum fit precision 

• Shapely due to perfect contour 

• Mounting holes already present 


• Delivered unpainted 


Fitment: 21-22 Sportster S RH1250S , Fitment Note: For 

160/70 17“ Tire., Finish: Raw, Material: Steel, Unit: Each, 

Qty.: 1.0 

PART# 

DESCRIPTION 

921457 Standard 17“ 

921458 Street Cut 17“ 

901863 

. t- 

Custom V2 Front Fender 

• Direct fit to OEM front fender mounting points 

• Available ready to paint or in H-D black 


Approved, Position: Front, Material: ABS, Wheel /Tire ø: 17“, 



921642 Ready To Paint 

921643 Gloss Black 

. t- 

Sidemount License Plate Bracket Kit 

• High quality steel 

• CNC laser cut 

• Incl. LED license plate light 


Powder Coated, Certification: Approved, Position: Rear, 

Material: Steel, Unit: Kit, Qty.: 1.0 

PART# FIELD OF 

DESCRIPTION 

APPLICATION 

921650 German specification Germany 180 x 200 mm 

921652 Austria specification Austria 210 x 170 mm 

921654 Swiss specification Swiss 180 x 140 mm 

921655 Italy specification Italy 170 x 170 mm 

921656 France specification France V2 210 x 130 mm 

921657 Dutch specification Netherland 210 x 140 mm 

8

Side Mount License Plate Holder with Slide-In 

Frame 

Cult-Werk side mount license plate brackets including approval 

for several license plate sizes in Europe. The bracket is made of 

laser cut steel including a push-in license plate frame. It is one of 

the shortest versions available and offers a great look to any H-D 

model. Black powder coated with factory installed LED license 

plate light. 

Features: 

• 1x side mount license plate bracket including push-in license 

plate frame 

• 1x pre-mount LED license plate light, E-approved 

• 4x set screws to fasten the license plate 

• 3x buttonhead screws 5/16“ 


Powder Coated, Certification: Approved, Material: Steel, 

Lighting Type: LED, Unit: Kit, Qty.: 1.0 

PART# 

. t- 

DESCRIPTION 

921651 Germany 180 x 200 mm 

921653 Austria 210 x 170 mm 

Image similar to product 

Sportster S Side Mount License Plate Kit 

Sidemount licence plate bracket for Sportster S model year 2021- 

up, eliminating the ugly stock bracket that hides a bigger section 

of the rear wheel. The bracket is available including a licence 

plate base plate (size 18 x 20 cm). The „slip-in“ type base plate is 

manufactured with a slot for the number plate and is equipped 

with LED number plate lighting. Existing stock mounting points 

are used without any modification for installation of this superclean 

licence plate bracket. 


Powder Coated, : German Size 180x200mm, Unit: Each, 

Qty.: 1.0 

Side Mount License Plate Kit 

• Available for Harley Dyna, Softail, Sportster and Indian Scout 

• Adaptable for Dyna, Softail, Sportster models with 3/4“ axles 

with Heinz Bikes 3/4“ adapter set 

• Integrated LED license plate light in slim aluminum housing 

• Stable arm with guaranteed ANTI TWIST safety 

• Invisible cable routing on the inside 

• 3 different mounting options in width 

• An approved position, with the possibility of fitting the license 

plate closer to the wheel 

• High-quality aluminum with a noble surface finish in black 

anodized or chrome 

• Comes in different sizes for GERMANY - SWISS - AUSTRIA 

• Including all mounting material and axle nuts 

• GTÜ approved with certificate 


Anodized, Certification: Approved, Material: Billet 

Aluminium, Lighting Type: LED, Unit: Kit, Qty.: 1.0 

PART# 

Images similar to product 

DESCRIPTION 

921698 German specification 180x200mm 

921699 German specification 220x200mm 

921700 Austria specification 210x170mm 

921701 Swiss specification 180x140mm 

921702 Italy specification 177x177mm 

921703 France specification 210x130mm 

Sporster S Side Mount License Plate Bracket 

Sidemount licence plate bracket for Sportster S from model year 

2021-up, eliminating the stock bracket that hides a bigger section 

of the rear wheel. The bracket is available as „bracket only“, 

allowing international license plate sizes to be adapted. Only 

existing stock mounting points are used for installation of this 

super-clean licence plate bracket. 


Powder Coated, : Only Bracket without License Plate, 


Undertail License Plate Holder 

• Perfect match to the V-Performance Sportster S Exhaust System 


Powder Coated, Material: Steel, Unit: Each, Qty.: 1.0 

9

Diag4Bike Diagnostic Software for Harley- 

Davidson 

Diag4Bike Serial Diagnostic Software. Professional diagnostic 

tool for Harley Davidson & Buell. Diagnoses electronic 

fuel injection module (EFI) and others (Security modules, 

ABS, etc.) though the diagnostic connector. The kit contains 

a communication interface with HD adapter, USB cable for 

connection to your Laptop (PC) and software compatible with 

Windows 7, 8 and 10. A wireless Bluetooth version of the interface 

is also available. The system performs the following functions 

& more. Ignition Module . EFI. Gauges (Speedo, Tach & 

Instrument Module). ABS Module (Delphi + CAN models). Read 

and Clear Diagnostic Trouble Codes. Read Identification data 

(part numbers, VIN number). Monitoring real-time data (throttle 

position, temperature, oxygen sensors, turn signals etc.). Test 

actuators (injectors, coils, main relay, fuel pump, idle, turn signals, 

tachometer, lamps etc.). ACR. Idle speed adjustment 800 - 1200 

rpm (models with Delphi Electronic Fuel Injection Module - except 

of M8 and RevMax engines). 

By purchasing this diagnostic software for PC receives a license for 

the diagnostic software for Harley-Davidson® & Buell® profiversion 

V21.x and all the updates for models manufactured up to 

2021. Also included is 1 x Serial Adaptor cable 4 pin, 1 x 6 pin (Can 

Models), 1 x OBD2 and 1 x Tuning Multi Dongle. 

• Global test 

• Searches for and identifies all embedded control units and reads 

trouble code memory and generates/prints a diagnostic report 

• Ignition module diagnostics 

• EFI (Electronic Fuel Injection Module) diagnostics 

• TSSM diagnostics (Turn Signal Security Module) 

• HFSM diagnostics (Hands Free Security Module) 

• Gauge (Speedo, Tach and Instrument Module) diagnostics 

• ABS Module readout 

• ABS Bleeding 

• Radio diagnostics 

• Thunder MAX EFI compatible 

• Read and Clear Diagnostic Trouble Codes 

• Read Identification data (parts number, VIN number) 

• Monitoring real-time data and data logging (throttle position, 

temperature, oxygen sensors, turn signals etc.) 

• Test actuators (injectors, coils, main relay, fuel pump, idle, turn 

signals, tachometer, lamps etc.) 

• Idle speed adjustment 800 - 1200 rpm (models with Delphi 

Electronic Fuel Injection Module) 

• TSSM configuration, PIN read/change, Auto arming disable/ 

enable etc. 

• HFSM configuration, Key FOB assignment/replacement, Auto 

arming disable/enable, PIN read/change 

653747 Fitment: 01-22 Softail, 04-17 Dyna, 02-22 Touring, 96-97, 

00-01 FLHRI, 96 FLHTUI, 96 FLTCUI, 97-01 FLHTCUI, 98-01 

FLHRCI, 99-01 FLTRI, 02-17 V-Rod, 09-22 Trike, 07-20 

Sportster, 21-22 Sportster S RH1250S , 21 Pan America 

RA1250, 21 Pan America RA1250S, 22 Pan America 1250 

Special RA1250S , 22 Pan America 1250 RA1250 , Unit: 

Each, Qty.: 1.0 

Diag4Bike Replacement/Upgrade Serial Data 

Link Connector 

Connection cable for serial the data connection of the Diag4Bike 

diagnostic software to connect to the PC or laptop. As a 

replacement or upgrade for use with newer HD models. 

919811 Fitment: 21-22 Softail, 21-22 Touring, 21-22 Trike, 21 

Pan America RA1250, 21 Pan America RA1250S, 22 

Pan America 1250 Special RA1250S , 22 Pan America 

1250 RA1250 , 21-22 Sportster S RH1250S , Field of 

Application: HD OBD 2 Data Link Connector, Unit: Each, 

Qty.: 1.0 

Harley-Davidson and Indian Tuning Multi- 

Dongle 

This Multi-Dongle will immediately allow you to carry out 

professional tuning of one Harley-Davidson® or Indian® engine. 

Can be used with Diag4Tune Software included in Diag4Bike 

Diagnostics Software #653747, #890084! That kind of Dongle is a 

very quick flash tuning device for EFI Harley-Davidson or Indian 

Motorcycles. You are allowed to tune any fuel injected Harley- 

Davidson motorcycle with the Delphi ECM, 06-22 models or Indian 

motorcycles up to 2020. Diag4Tune downloads and stores a version 

of the Original calibration that was saved when the Dongle was 

married to the ECM. After that, you have two opportunities to 

flash your ECM: Diag4Tune Preconfigured Maps or Diag4Tune 

identifies your bike’s information and automatically sorts a lot of 

applicable Power Bench proven tunes for you to choose from. Self 

made Map with #619084 and the Smart Power Bench II #888128, 

or any other Power Bench, you are able to make your own 100% 

perfect Map for any kind of bike. Software version V21.1 and 

higher is required for use in Diag4Tune software. 

921209 Fitment: 21 Pan America, 22 Pan America 1250 Special 

RA1250S , 07-20 Sportster, 06-17 Dyna, 06-22 Softail, 

06-22 Touring, 09-22 Trike, 06-17 V-Rod, 21 Sportster 

RH, 22 Sportster S RH1250S , 15-20 Indian Bagger, 14-20 

Indian Cruiser, 15-20 Indian Touring, 15-20 Scout, 16-20 

Scout Sixty, 19-20 Scout Bobber, Fitment Note: Not all 

Tuning Levels are available for every Model., Unit: Each, 

Qty.: 1.0 

Custom Chrome Europe GmbH 

Carl-von-Ossietzky-Straße 8 | 55459 Grolsheim/Germany 

Phone: +49 (0) 6721 - 4 007 - 0 | Fax: +49 (0) 6721 - 4 007 - 100 

e-mail: info@customchrome.de | www.custom-chrome-europe.com 

Managing Director: Thomas Noetzel · Mainz Local Court · Commercial Registry No. 45562 · VAT No. DE811309246

SPORTSTER S PARTS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?