NEW PRODUCTS OCTOBER

Spare Parts | Service Parts | Custom Parts | Accessories | Apparel

NEW PRODUCTS | OCTOBER 2022 NEW PRODUCTS | OCTOBER 2022

Old School Swing Solo Seat

The „Old School“ swing saddle with leather turns your Harley

into a real eye-catcher and upgrades it greatly.

• All bores and millings are milled on the most modern 5-axis

CNC machining centers, so that the saddle only has to be

exchanged for the original

• The saddle is top processed, fits perfectly

• All assembly materials are included

921635 Fitment: 18-20 FXBB, 20-22 FXST, 21-22 FXBBS, Unit: Kit

Torque 1.25“ Handlebar

• Internal cable routing

• Perfect handling

• Superbike style

922756 Fitment: 07 FXDSE, 08 FXDSE2, 09 FXDFSE, 10 FXDFSE2,

05 FLSTFSE, 06 FLSTFSE2, 14-15 FLSTNSE, 13-14 FXSBSE,

10-12, 14-17 FLSTF, 11-12, 14-17 FLSTFB, 14-17 FXSB,

07 FXSTSSE, 08 FXSTSSE2, 09 FXSTSSE3, 10 FLSTSE, 11

FLSTSE2, 12 FLSTSE3, 13 FLSTF 103, 13 FLSTFB 103,

16-17 FXSE, 16-17 FLSTFBS, 03 FXSTDSE, 04 FXSTDSE II,

18-19 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20

FXFB, 18, 20 FXFBS 114, 18-22 FLSB, 19-20 FLFB, 19-20

FLFBS 114, 19 FXFB 114, 21-22 FLFBS, 21-22 FXFBS,

21-22 FXBRS, 02-03 FLHRSEI, 07 FLHRSE3, 08 FLHRSE4,

14 FLHRSE, Fitment Note: Not for bar-end turn signals

on TBW models or heated grips, Color: Chrome,

Certification: Approved, Operation Type: Throttle By

Wire, Bar ø: 1 1/4“, Clamp ø: 1 1/4“, Cable Routing:

3-Hole, Unit: Each

Flat Riser Kit

The Thunderbike Flat Riser Kit is now also available for the new

Harley-Davidson Nightster RH975 and ensures a super flat look

on the handlebars.

• Handlebar diameter: 1“ (25.4mm) or 28,6mm

• Sold in pairs

• Milled aluminum

Fitment: 22 Sportster Nightster RH975, Color: Gloss Black,

Finish: Powder Coated, Unit: Pair

PART# DESCRIPTOPN

923623 For 28,6mm Handlebars

923622 1“ Handlebars

Mirror Bracket Set

• Sold in pairs

• Black

• Thread: M10x1.25

923618 Fitment: 22 Sportster Nightster RH975, Color: Black,

Position: Left, Right, Unit: Pair

Frame Cover

• 100% custom-fit ABS plastic part

• All existing bores and millings are milled on the most modern

5-axis CNC machining centers

• The part will be delivered in glossy black

• Fits best in conjunction with Cult Werk swing saddle

921636 Fitment: 18-20 FXBB, 20-22 FXST, 21-22 FXBBS, Field of

Application: Two holes must be drilled during assembly

for the saddle base plate, Color: Gloss Black, Unit: Each

Sportster S and Nightster Handlebar

Thunderbike handlebar for Sportster S & Nightster RH.

• Available in widths: 74cm or 80.5cm

• Aluminum

• Black Matt

• With Approval

Bar ø: 28,6 mm, Clamp ø: 28,6 mm, Unit: Each

PART# DESCRIPTION

923733 805mm

923734 740mm

Satin Grips

These machined aluminum grips Satin can be mounted to match

Thunderbike Satin footpeg systems or as a stand-alone gimmick.

Matching toppers are included.

• CNC machined by Thunderbike

• Available in pairs

• Anbauanleitung / Manual (DE/EN)

923644 Fitment: 21-22 Sportster S RH1250S , 22 Sportster

Nightster RH975, Color: Black, Finish: Anodized,

Operation Type: Throttle By Wire, Material: Billet

Aluminium, Bar ø: 7/8“, Unit: Pair

Shift Peg

• Milled aluminium

• Sold each

• Matching footpeg sets sold separately

923628 Fitment: 21-22 Sportster S RH1250S , Color: Black

Cut, Finish: Satin, : Black Cut Black Satin, Material:

Aluminium, Unit: Each

SP-S Rider Foot Pegs

Original Thunderbike rider footrest set for the original footrest

mount.

• Size like original

• CNC milled aluminum

• Sold in pairs

923627 Fitment: 18-22 Softail, 21-22 Sportster S RH1250S ,

22 Sportster Nightster RH975, Color: Black, Material:

Aluminium, Unit: Pair

2 for more details check www.custom-chrome-europe.com

for more details check www.custom-chrome-europe.com

3


Sportster S Turn Signal/Taillight/Brake Light Kit

This bar is the perfect solution, if you want to move your liceseplate

to the left side or want to clean the look up by removing

the lights.

• CNC machined aluminium

• finish: black

• including replaceable LED modules & Load Equalizer

• E-approved


923635 Fitment: 21-22 Sportster S RH1250S , Fitment Note: The

reflector has to be relocated. Does not fit in combination

with rear fender extension of the Passenger Pillion

Kit., Color: Black, Glass Color: Smoke, Certification:

E-Approved, Lighting Type: LED, Unit: Kit

Stripe LED Turn Signal

Thunderbike Mini LED turn signals ensure a unique look. The

CNC machined aluminum housing is polished by hand. This

guarantees a clean look of the bike without having to accept any

loss of visibility in road traffic.

• Smoked Lens

• Load Equalizer for correct frequency recommended

923634 Fitment: 21-22 Sportster S RH1250S , Color: Black,

Finish: Powder Coated, Glass Color: Light Smoke,

Certification: E-Approved, Material: Aluminium,

Lighting Type: LED, Unit: Pair

54mm Quick-Stripe Turn Signal Set

Original Thunderbike Stripe turn signals with Quick Adapter for

fork mounting provide a particularly clean look on the bike.

• CNC-milled bracket with indicator housing

• In pairs

• Easy to mount

• E-mark

923710 Fitment: 21-22 Sportster S RH1250S , Color:

Black, Finish: Powder Coated, Glass Color: Tinted,

Certification: E-Approved, Lighting Type: LED, Unit: Pair

Nano Series Sportster S Handlebar LED Turn

Signal

Inconspicuous on the handlebar end, they make large turn

signals disappear and impress with their furious brightness

and laser-like luminosity. State-of-the-art lighting technology

in a minimal size, which is smaller than a cent piece. Precision

machined from high quality billet aluminum available in black

powder coated finish. The indicators are connected directly to

12V without resistors. On models with a Can Bus system, the

flashing frequency of the indicators is regulated automatically.

• The new NANO light technology convinces with its tiny size

and the uniquely strong luminosity

• The „black powder-coated“ aluminum is very weatherresistant

and keeps the turn signals looking like new forever

• Perfect fit

• The lighting units are E-approved

• Protected design

• Made in germany


Finish: Powder Coated, Glass Color: Smoke,



Thunderbike have developed this optional reflector to match our

rear light & indicator kit.

Sportster S Rear Reflector

923636 Fitment: 21-22 Sportster S RH1250S , Glass Color: Red,

Bezel Color: Black, Certification: E-Approved, Unit: Each

Shorty LED Front Turn Signals with Bracket

LED indicator set „Shorty“ incl. aluminum bracket suitable for

Indian ® Scout models from 2015 up to now! The small holder

in which the LED indicators including the E-mark is located was

milled from an aluminum part and then powder-coated in matt

black with a structure (to match fork clamp). The new Cult-Werk

icon was milled into the holder to round off the set optically

perfectly! The indicators are simply replaced with the original

indicators!

921545 Fitment: 15-21 Scout, 16-20 Scout Sixty, 19-21 Scout

Bobber, 21 Scout Bobber Twenty, 22 Scout , 22 Scout

Bobber , 22 Scout Bobber Twenty , 22 Scout Rogue

, Color: Black, Glass Color: Smoke, Certification:

E-Approved, Position: Front, Lighting Type: LED, Unit:

Set

49mm Quick-Stripe Turn Signal Set

Original Thunderbike Stripe turn signals with quick adapter for

standpipe mounting ensure a particularly clean look on the bike.

• CNC milled fork holder with turn signal housing

• Sold in pairs

• Easy construction

• E-mark

923621 Fitment: 22 Sportster Nightster RH975, Color:


Certification: E-Approved, Lighting Type: LED, Unit: Pair

Nano Series Sportster S Handlebar LED Turn

Signals/Position Light

Inconspicuous on the handlebar end, they make large turn

signals disappear and impress with their furious brightness

and laser-like luminosity. State-of-the-art lighting technology

in a minimal size, which is smaller than a cent piece. Precision

machined from high quality billet aluminum available in black

powder coated finish. The indicators are connected directly to

12V without resistors. On models with a Can Bus system, the

flashing frequency of the indicators is regulated automatically.

• The new NANO light technology convinces with its tiny size

and the uniquely strong luminosity

• The „black powder-coated“ aluminum is very weatherresistant

and keeps the turn signals looking like new forever

• Perfect fit



• Made in germany


Finish: Powder Coated, Glass Color: Smoke,





5


Jetstream and Jetstream DF LED Sequential Lighting Turn Signals and 3 in 1 Turn Signal

The Kellermann Jetstream® is probably the most spectacular motorcycle indicator ever build. The shape is extremely aerodynamic

and therefore also at high speeds very streamlined.

No other motorcycle indicator with sequential lighting and ECE approval gets even close, the brightness of the Kellermann

Jetstream® is unmatched.

Especially overtaking becomes safer as the vehicle ahead is strongly warned by the extreme illuminating power, the danger of

inadvertently change of lanes is reduced.

• Highest illuminating power

• Kellermann high power LED technology

• State-of-art „IC“- chip technology

• 32 MHz real time micro processor controlled

• Silent-Current, advanced Power Saving algorithm

• High measure of visibility across a wide angle range

• Longlife Protection Guard®

• Suitable for 12 volt DC applications

• Flow-optimized metal housing, high quality manufacturing

• M8 x 20mm thread

• High-quality vibration-absorbing bearing

• Global design protection

Color: Black, Glass Color: Clear, Certification: ECE-Approved, Lighting Type: LED, Unit: Each

PART# POSITION TYPE

922807 Front, Rear, Left, Right Indicator front and rear

922808 Rear, Left, Right 3 in 1 Indicator rear

Shorty LED Turn Signals/Taillight/Brake Light

with Bracket

The small holder in which the LED 3in1 lighting incl. E-mark is

located was milled from an aluminum part and then powdercoated

in matt black with structure (to match the frame). The

new Cult-Werk icon was milled into the holder to round off the

set optically perfectly! The lighting unit is simply replaced with

the original version!

921530 Fitment: 19-21 Scout Bobber, 21 Scout Bobber Twenty,

22 Scout Bobber , 22 Scout Bobber Twenty , Color:

Black, Glass Color: Smoke, Certification: E-Approved,

Lighting Type: LED, Unit: Set

Strut Stripe Turn Signal/Taillight/Brake Light

Original Thunderbike indicator set for the Nightster RH975 with

original struts.

• 3 in 1 indicator with rear light and brake light

• Modern LED technology

• E-mark

• Sold in pairs


Glass Color: Tinted, Certification: E-Approved, Lighting

Type: LED, Unit: Pair

Nano 3 in 1 LED Lightbar with LED Turn

Signals, Brake- and Taillight

The perfect rear conversion is guaranteed with the new 3in1

Lightbar from HeinzBikes! Inconspicuous at the rear, it hides

the large original turn signals and taillights and when in use,

the light units convince with furious brightness and laser-like

luminosity. State-of-the-art lighting technology in a minimal

size, which is smaller than a cent piece. It is mounted directly

under the rear fender without the use of adapters or similar

accessories. Precision machined billet aluminum with a black

powder coat finish. The indicators and taillights are connected

directly to 12V without resistors. In combination with the new

SIDE MOUNT license plate holder, the rear of the Sportster S will

shine in a complete look.



923608 Fitment: 21-22 Sportster S RH1250S , Color:


Certification: E-Approved, Lighting Type: LED, Unit: Kit

Sportster S Handlebar Side Mount Turn Signals

Rick’s Motorcycles manufactures Sportster S model fitting handlebar-tip turn signals which offer a super-clean look and are almost

invisible! Manufactured from high-grade aluminum the CNC-machined brackets hide the cables inside the handlebar tube. Indicators

are Atto Integral by Kellermann, fixed inside the housing. With ECE approval these indicators are street legal and can be used all

over Europe.

921456 Fitment: 21-22 Sportster S RH1250S , Color: Black, Finish: Powder Coated, Glass Color: Clear, Bezel Color: Black,

Certification: E-Approved, Lighting Type: LED, Unit: Pair, Qty.: 1.0

Round LED License Plate Light

• Round plastic housing

• Clear lens

• LED

• Dimensions: Diameter: 13 mm, Length: 16 mm

• Threated stud: M6 x 15 mm

Glass Color: Clear, Certification: E-Approved, Diameter

mm: 13.0mm, Lighting Type: LED, Unit: Each

PART# COLOR

923849 Black

923850 Chrome

Crumb LED Turn Signal

• Super small

• Black plastic housing

• Slightly tinted glass

• Powerful LED technology

• Front and/or rear installation

• Total width without thread 24,5mm

• Light unit dimensions 16x11x10,5mm (WxHxD)

923851 Fitment Note: E-marked as rear indicator only.,

Color: Black, Glass Color: Light Smoke, Certification:

E-Approved, Diameter mm: 16.0mm, Lighting Type:

LED, Unit: Pair

Gauge Mount for Clubstyle Riser

If you have a new Softail M8 model, then this bracket is what

you need. The lightweight aluminum housing completely

encloses your digital speedometer and creates a clean, custom

look. In combination with the HeinzBikes Clubstyle handlebar

risers, you can attach the speedometer exactly where it suits you

best. The speedometer holder is simply clamped between the

two bars of the risers.

• High quality billet aluminum, CNC machined

• Available in black powder coated or silver anodized

• Easy assembly in minutes

• Multiple mounting options in height

• Suitable for all HeinzBikes handlebar risers

• Premium Quality - German Made

• Approved

• Including GTÜ parts certificate

Fitment: 18-19 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX,

18-20 FXBB, 20-22 FXST, 21-22 FXBBS, 21-22 FXBRS, Fitment

Note: Fits only 2018-up HD with digital HD Speedo ,

Certification: E-Approved, Unit: Kit

PART# COLOR FINISH

923789 Gloss Black Powder Coated

923790 Silver Anodized



7


Speedometer Offset Kit

With this kit Low Rider models from 2018up, the Speedometers can be relocated to the original headlight mask! This ensures a much

better view of the speedometer as you no longer have to look down at the tank! The offset is required in connection with our Dash

Cover! It is made of steel and then powder-coated in glossy black!

No cables need to be extended during assembly, it is enough to reroute the cables to get to the right position! In principle, the

holder replaces the original holder of the mask and the mask can then be attached to the new holder again! Two covers are supplied

for the fittings, which serve as splash protection from below and for attachment!

921632 Fitment: 18-20 FXLR, 20-22 FXLRS, 22 FXLRST, Color: Gloss Black, Finish: Powder Coated, Material: Steel, Unit: Kit

WTF Shovel Rocker Box Cover

• Replaces the OEM rocker box covers

• Dimensions and tolerances identical to the OE part

• OEM mounting hardware reusable

• Seal kit not included

Fitment: 00-17 Dyna, 00-17 Softail, 00-16 Touring, 09-16

Trike, Material: Cast Aluminium, Unit: Each

PART# COLOR FINISH

923251 Raw

923253 Black Satin

Dash Cover

The part gives your Harley a clean, cool and flatter look on the tank and is required as a replacement for the original cover if the

speedometer are relocated to the headlight mask with our offset!

During assembly it is necessary to shorten the holder for the original dash cover and then holes have to be drilled - then the cover is

attached with the new supplied bracket

Certification: Approved, Fitment: 18-20 FXLR, 20-22 FXLRS, 22 FXLRST, Material: ABS, Unit: Each

PART# COLOR FINISH

921630 Ready To Paint

921631 Gloss Black

SP-S Clutch Cover


• Black anodized

• Thunderbike SP-S design

• Installation instructions / manual (DE/EN)


Nightster RH975, Color: Black, Finish: Anodized, Unit:

Each

Dash Cover with Speedometer Offset Kit

The part gives your Harley a clean, cool and flatter look on the tank and is required as a replacement for the original cover if the

speedometer are relocated to the headlight mask with our offset!

During assembly it is necessary to shorten the holder for the original dash cover and then holes have to be drilled - then the cover is

attached with the new supplied bracket.

Included speedometer offset kit which ensures a much better view of the speedometers as you no longer have to look down at the

tank! It is made of steel and then powder-coated in glossy black!

No cables need to be extended during assembly, it is enough to reroute the cables to get to the right position! In principle, the

holder replaces the original holder of the mask and the mask can then be attached to the new holder again! Two covers are

supplied for the fittings, which serve as splash protection from below and for attachment!

Fitment: 18-20 FXLR, 20-22 FXLRS, 22 FXLRST, Material: ABS, Unit: Kit

PART# COLOR FINISH


921634 Gloss Black

Ribbed Touring Primary Cover

• “Ribbed” design directly inspired by the finned primary covers

from the golden age of choppers

• Our primary cover EMD / ribsters snatch install in place of your

OEM touring primary cover and will radically change the look

of the left side of your engine

• Manufactured in die cast aluminum, CNC milled gasket surface

• Dimensions and tolerances identical to the OEM hardware

• Seals not included (available separately)

Fitment: 17-22 Touring, 17-22 Trike, Material: Cast

Aluminium, Unit: Each

PART# COLOR FINISH

920505 Raw

920507 Semi Polished

920506 Black

920508 Black Cut

SP-S Ignition Cover

• Machined Aluminum

• Black anodized

• Each




Each



9


921525

Sportster S and Nightster Front Pulley Cover

Our design cover for the front belt pulley provides a classy black

cut look. The short timing belt guard is included in the kit.

• Machined aluminium

• Cover rotates with


Nightster RH975, Color: Black Cut, Material: Billet

Aluminium, Unit: Kit

921526

Belt Guard

The belt guards from Cult-Werk comes in black powder coated

versions. Cool and lean look for your bike and not boring like

the OEM counterpart. CNC-machined on the most modern 5-axis

CNC machining centers!

Fitment: 19-21 Scout Bobber, 21 Scout Bobber Twenty,

22 Scout Bobber , 22 Scout Bobber Twenty , Color: Black,

Finish: Powder Coated, Material: Aluminium

PART# DESCRIPTION UNIT

921525 Upper Guard Each

921526 Lower Guard Each

Upper Fork Cover

• Billet aluminum upper fork covers

• Grooved or plain versions available

Part#: 923626, Fitment: 22 Sportster Nightster RH975,

Color: Black, Position: Upper, Material: Billet Aluminium,

Unit: Pair

Mid Version 6-Piece Fork Covers

Complete 6-piece fork cover kit „Mid Version“ in black with

the lower covers made of aluminum or with bellows suitable

for Indian ® Scout Bobber models from 2018. With this kit

from Cult-Werk you cover the fork tubes above, between and

below the fork bridges if the original turn signal brackets exist!

This covers the fork tubes and the entire fork appears bulkier

and completely black! This fork cover kit can be used with the

Original Equipment front fender or custom fenders.

The individual covers are attached using concealed grub screws

and thus center themselves on the fork tubes. This ensures that

the cover is held securely. To ensure that the gaps between the

covers and the triple clamps are exactly parallel, the covers have

been provided with the same bevels as the triple clamps.

Our covers are made of high-quality aluminum and are milled

on the most modern 5-axis machining centers and then powdercoated

in glossy black. This guarantees the highest quality! The

assembly is very simple, the upper and the lower cover are only

pushed over the fork tube and screwed tight. On the inside of

the lower cover there is a cut-out for clearance on the fender

and is therefore hardly visible.

Fitment: 19-21 Scout Bobber, 22 Scout Bobber , Color:

Gloss Black, Finish: Powder Coated, Position: Front,

Material: Aluminium, Unit: Kit

Mid Version 6-Piece Fork Covers with Rubbers

Complete 6-piece fork cover kit „Mid Version“ in black with

the lower covers made of aluminum or with bellows suitable

for Indian ® Scout Bobber models from 2018. With this kit

from Cult-Werk you cover the fork tubes above, between and

below the fork bridges if the original turn signal brackets exist!

This covers the fork tubes and the entire fork appears bulkier

and completely black! This fork cover kit can be used with the

Original Equipment front fender or custom fenders.

PART# FITMENT NOTE DESCRIPTION

921541 With original Turn

Signals and Brackets.

Middle Version without

Cult-Werk Logo

921543 With original Turn Signal

Brackets.

Middle Version with Cult-

Werk Logo

The individual covers are attached using concealed grub screws

and thus center themselves on the fork tubes. This ensures that

the cover is held securely. To ensure that the gaps between the

covers and the triple clamps are exactly parallel, the covers have

been provided with the same bevels as the triple clamps.

SP-S Alternator Cover


• Black anodized

• In Thunderbike SP-S design



Each

Sportster S Belt Guard

The Thunderbike belt protection ensures a visually perfect cover

of the drive belt.

• Material: aluminum

• Black Matt


923629 Fitment: 21-22 Sportster S RH1250S , Color: Flat Black,

Finish: Powder Coated, Unit: Each

Our covers are made of high-quality aluminum and are milled

on the most modern 5-axis machining centers and then powdercoated

in glossy black. This guarantees the highest quality! The

assembly is very simple, the upper and the lower cover are only

pushed over the fork tube and screwed tight. On the inside of

the lower cover there is a cut-out for clearance on the fender

and is therefore hardly visible.

Fitment: 19-21 Scout Bobber, 22 Scout Bobber , Fitment

Note: With original Turn Signal Brackets., Color: Gloss

Black, Finish: Powder Coated, Position: Front, Material:

Aluminium, Rubber, Unit: Kit

PART# DESCRIPTION

921542 Middle Version without Cult-Werk Logo

921544 Middle Version with Cult-Werk Logo

Front Axle Cover

• CNC machined alu

• Sold as pair

• Black matte finish

• Manual (DE/EN)

Color: Black, Finish: Powder Coated, Position: Front,

Material: Aluminium, Unit: Pair

PART#

FITMENT

923631 21-22 Sportster S RH1250S

923616 22 Sportster Nightster RH975



11


Rear Axle Cover Set

• Easy to mount

• Set (2 pieces)

• Milled aluminum


Color: Black, Finish: Powder Coated, Position: Rear,

Material: Aluminium, Unit: Pair

PART# FITMENT



Sportster S and Nightster Frame Cover

With this Thunderbike frame cover it is possible to hide the

brake line, the hoses of the cooling and the activated carbon

filter.

• Manual (DE/EN)


Nightster RH975, Color: Black, Unit: Each

Fork Lowering Kit


Position: Front, Unit: Pair

Swing Axle Cover

• Easy to mount

• Set (2 pieces)

• Milled aluminum

• Black

Color: Black, Finish: Powder Coated, Material: Aluminium,

Unit: Pair

PART# FITMENT



SP-S Triple Tree Kit

• CNC milled from aluminum

• black contrast cut

• Set consists of upper and lower bridge

• only in combination with 28,6mm handlebar

923637 Fitment: 21-22 Sportster S RH1250S , Color: Black Cut,

Finish: Anodized, Unit: Set

Milwaukee Eight Shock Lift Kit

• 25mm (1“) lift kit for M8 Softail models from 2018 except

FXDR, FXFB and FLHC


• We recommend the Compression Tool - Shock Spring

Compressor CCE#918355

• No sending in the shock absorber

• Including needle bearing

• Without Approval

922052 Fitment: 18-22 Softail, except 19-20 FXDRS 114, 18-20

FXFB, 19 FXFB 114, 18-21 FLHC, 19-20 FLHC 114, 18,

20 FXFBS 114, 18 FLHCS 114, 18 FLHCS 114 ANV, 21-22

FXFBS, 21-22 FLHCS, Color: Black, Position: Rear, Unit:

Each

FLT Brake Rotor Adapter

• Allows the use of factory brake rotors on aftermarket custom

wheels

• Forged from aluminum and CNC machined to a perfect finish

• Universal design allows factory FLT rotors to be installed on

most 5-bolt HD custom wheels

• Includes hub mounting hardware and accepts factory rotor

hardware

• Designed to fit 11.8“ spoke mounted factory FLT front rotors

923262 Field of Application: 11,8“ spoke mounted FLT-factory

front rotor, Color: Black, Finish: Anodized, Unit: Each

Fork Brace

• Stabilizes front fork

• Easy bolt-on design

923625 Fitment: 22 Sportster Nightster RH975, Field of

Application: For use with OE fork., Color: Gloss Black,

Finish: Powder Coated, : With OEM Wheel, Position:

Front, Unit: Each

Sportster S Lowering Kit

• Lowers the rear up to 25mm (1“)

922753 Fitment: 21-22 Sportster RH, Color: Black, : -25mm,

Position: Rear, Unit: Each



13


Tourance Next 2 Karoo 4 Trailmax Meridian

21 up Pan America, Pan America Special Tires

Certification: E-Approved, Unit: Each

PART# DESIGN BRAND DESCRIPTION POSITION

922811 Tourance Next 2 Metzeler 120/70 R 19 M/C (60V) TL Front

922812 Tourance Next 2 Metzeler 170/60 R 17 M/C (72V) TL Rear

922813 Karoo 4 Metzeler 120/70 R 19 M/C (60Q) M+S TL Front

922814 Karoo 4 Metzeler 170/60 R 17 M/C (72Q) M+S TL Rear

922818 Trailmax Meridian Dunlop 120/70 R 19 (60V) TL Front

922819 Trailmax Meridian Dunlop 170/60 R 17 (72V) TL Rear

Custom V2 Front Fender

• Direct fit to OEM front fender mounting points

• Available ready to paint or in H-D black

Fitment: 20-22 FXLRS, 22 FXLRST, Certification: Approved, Position: Front, Material: ABS, Wheel /Tire ø: 19“, Unit: Each

PART# COLOR FINISH


921629 Gloss Black

Custom V1 Front Fender

This front fender is shorter, narrower and makes the view of the front wheel free. In addition to account for the original metal

holder. The mounting holes are designed as slots, so the fenders can be adjusted in height continuously so you can regulate the

distance between.

Fitment: 20-22 FXLRS, 22 FXLRST, Certification: Approved, Position: Front, Material: ABS, Wheel /Tire ø: 19“, Unit: Each

Dunlop GT 503 Tires for 21 up Sportster S Models

Certification: E-Approved, Unit: Each

PART# DESCRIPTION POSITION

922816 160/70 TR 17 (73V) TL Front

922817 180/70 R 16 (77V) TL Rear

PART# COLOR FINISH


921627 Gloss Black

Dunlop D401 Tires for 22 Nightster Models

Certification: E-Approved, OEM #: 43200035, 43200063, Unit: Each

PART# DESCRIPTION POSITION

1362025 100/90-19 57H TL Black Wall Front

922660 150/80B16 77H TL D401T (H-D) Rear

Old School Rear Fender

• ABS plastic

• No adjustment work necessary

• All drilling and milling are machined on the latest 5-axis CNC machining centers

• Fender replaces the OEM part

921637 Fitment: 18-20 FXBB, 18-20 FLSL, 20-22 FXST, 21-22 FXBBS, Color: Black, Finish: Ready To Paint, Certification: -Approved,

Material: ABS, Unit: Each



15


Indian Chief Stilett Rear Fender

Bobber Rear Fender

The „Bobber“ rear fender gives the Indian a narrower look and fits all Indian® Scout Bobber models from 2018.

Fitment: 19-21 Scout Bobber, 21 Scout Bobber Twenty, 22 Scout Bobber , 22 Scout Bobber Twenty , Certification:

Approved, Material: ABS, Unit: Each

PART# COLOR FINISH DESCRIPTION

921534 Black Ready To Paint Clear without Taillight

921536 Black Ready To Paint with Taillight

921535 Gloss Black Clear without Taillight

921537 Gloss Black with Taillight

• Rear fender suitable for pillion riders

• The original seat can still be used

• A compartment is integrated in the fender to store the control units

• The original rear carrier is completely eliminated

• The fender impresses with its shape and accuracy of fit

• Fastening material is included


• Bolt on

• With Approval

• up to 200 Tire

• 100% Made in Germany

921549 Fitment: 22 Chief Dark Horse , 22 Chief Bobber Dark Horse , 22 Super Chief Limited , Finish: Raw, Certification: ^-Approved,

Material: Steel, Unit: Each

Indian Chief Front Fender

• Front fender made of 2.5 mm thick steel (base material)

• For the original 19 or 16 inch wheel with 130 tires

• The fender impresses with its beautiful fit

• Fastening material is included



Fitment: 22 Chief Dark Horse , 22 Chief Bobber Dark Horse , 22 Super Chief Limited , Finish: Raw, Material: Steel, Unit:

Each

Long Indian Chief Rear Fender

• Rear fender suitable for passenger riders

• Including extra seat shell and fastening material

• A compartment is integrated in the fender to store the control units

• The original rear carrier is completely eliminated

• The fender impresses with its shape and accuracy to fit

• Easy bolt on

• With Approval

• Fits up to 200 Tire


923707 Fitment: 12-22 Indian Cruiser, Finish: Raw, Material: Steel, Unit: Each

PART#

DESCRIPTION

921547 Short Version

921548 Long Version



17


Sportster S Front Fender

Special front mudguard for original tires.

• Supplied undrilled and unpainted

923638 Fitment: 21-22 Sportster S RH1250S , Material: Fibre Glass, Unit: Each

Side Mount License Plate Bracket

• Comes with mounting hardware

• License plate base plate and lighting accessories sold

separately

Color: Flat Black, Finish: Powder Coated, Certification:

Approved, Position: Rear, Material: Steel, Unit: Each

PART# FITMENT



OEM Quality Milwaukee Eight Oil Filter

• OEM Quality Oil Filter

• Anti drain back valve

• 5 Micron synthetic filter medium

Fitment: 17-22 Touring, 17-22 Trike, 18-22 Softail, Material:

Metal, Unit: Each

PART# COLOR OEM #

922099 Black 62700296

922098 Chrome 62700297

Fuelpack FP4 ECM Tuning Module

Vance & Hines FP4 is the most intuitive tool on the market, giving you the power to control your motorcycle’s tune, view live sensor

data, read and clear trouble codes, and offers best in industry support from our FP4 technicians, all from your smartphone. The Vance

& Hines FP4 brings our legendary fuel tuning and performance to your 2021-2022 Harley-Davidson Touring, Softail, and CVO models,

with all new features, and the ease of use you expect from Vance & Hines.

• Fast and easy to use

• View live sensor data

• Read and clear trouble codes

• Advanced Tuning

• Built-in Decel Pop tool

• Improved Auto Tune Feature

• Throttle Progressivity feature (not available for bikes with

RDRS system)

• Advanced Tuning

• Ajustable idle RPM, rev limit,VE tables

• Target Air Fuel Ratio and Spark Advance

• Compatible iOS or Android (*AutoTune currently unavailable

for the iOS App)

922622 Fitment: 21-22 Softail, 21-22 Touring, Unit: Each



19

NEW PRODUCTS | OCTOBER 2022

CHECK OUR NEW DEALER STORE

WWW.CUSTOM-CHROME-EUROPE.COM

Custom Chrome Europe GmbH

Carl-von-Ossietzky-Straße 8

D-55459 Grolsheim

Phone: +49 (0) 6721 - 4 007 - 0

Fax: +49 (0) 6721 - 4 007 - 100

e-mail: info@customchrome.de

www.custom-chrome-europe.com

Managing Director: Thomas Noetzel · Mainz Local Court

Commercial Registry No. 45562 · VAT No. DE811309246

© Copyright by Custom Chrome Europe GmbH

All rights reserved. No part of this publication may be reproduced, stored in a retrieval

system, or transmitted, in any form or by any means without the prior written permission

of the publisher.

Custom Chrome Europe is a manufacturer and wholesale company and only sells to authorised specialised dealers.

The offer of this catalogue is therefore not aimed at private end consumers. Subject to possible errors.

NEW PRODUCTS OCTOBER

Create successful ePaper yourself

Delete template?

Save as template?