11.11.2022 Views

Makita Accessory Catalog 2022

Makita Complete Catalog and Pricelist for Accessories

Makita Complete Catalog and Pricelist for Accessories

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>2022</strong><br />

ACCESSORY CATALOGUE<br />

PRICES MAY CHANGE WITH OUT PRIOR NOTICE<br />

22.02.02 EDITION


2<br />

Safety Precautions<br />

When using electric tools, basic safety precautions should always be followed to<br />

reduce the risk of re, electric shock, and personal injury, including the following.<br />

/// KEEP WORK AREA CLEAN.<br />

Cluttered areas and benches invite injuries.<br />

/// CONSIDER WORK AREA ENVIRONMENT.<br />

Don't use power tools in damp or wet locations. Keep work area well lit.<br />

Don't expose power tools to rain. Don't use power tool in presence of<br />

ammable liquids or gases.<br />

/// KEEP CHILDREN AWAY.<br />

All visitors should be kept away from work area.<br />

Don't let visitors touch the tool or extension cord.<br />

/// STORE IDLE TOOLS.<br />

When not in use, tools should be stored in a dry, high of locked up place,<br />

out of reach of children.<br />

/// DON'T FORCE THE TOOL.<br />

It will do the job better and safer at the rate for which it was intended.<br />

/// USE THE RIGHT TOOL.<br />

Don't force small tools or attachments to do the job of a heavy-duty tool.<br />

Don't use tools for purposes not intended.<br />

/// DRESS PROPERLY.<br />

Don't wear loose clothing or jewelry. They can be caught in moving parts.<br />

Rubber gloves and non-skid footwear are recommended when working<br />

outdoors. Wear protective hair covering to contain long hair.<br />

/// USE SAFETY GLASSES.<br />

Also use face or dust mask if the cutting operation is dusty.<br />

/// DON'T ABUSE THE CORD.<br />

Never carry the tool by the cord or yank it to disconnect it from the socket.<br />

Keep the cord away from heat, oil, and sharp edges.<br />

/// SECURE WORK.<br />

Use clamps or a vise to hold the work. It's safer than using your hand and it<br />

frees both hands to operate the tool.<br />

/// DON'T OVERREACH.<br />

Keep proper footing and balance at all times.<br />

/// MAINTAIN TOOLS WITH CARE.<br />

Keep cutting tools sharp and clean for better and safer performance. Follow<br />

instructions for lubrication and changing accessories. Inspect tool cord<br />

periodically and if damaged, have it repaired by an authorized service facility.<br />

Inspect extension cords periodically and replace, if damaged. Keep handles dry,<br />

clean and free from oil and grease.<br />

/// DISCONNECT TOOLS.<br />

When not in use, before servicing and when changing accessories such as<br />

blades, bits and cutters.<br />

/// REMOVE ADJUSTING KEYS AND WRENCHES.<br />

Form the habit of checking to see that keys and adjusting wrenches are<br />

removed from the tool before turning it on.<br />

/// AVOID UNINTENTIONAL STARTING.<br />

Don't carry a plugged-in tool with a nger on the switch.<br />

Ensure switch is OFF when plugging in.<br />

/// USE OUTDOOR EXTENSION CORDS.<br />

When tool is used outdoors, use only extension cords intended for outdoor<br />

use.<br />

/// STAY ALERT.<br />

Watch what you are doing. Use common sense. Don't operate tool when you are<br />

tired.<br />

/// CHECK DAMAGED PARTS.<br />

Before further use of the tool, a guard or other part that is damaged should<br />

be carefully checked to determine that it will operate properly and perform its<br />

intended function. Check for alignment of moving parts, free running of<br />

moving parts, breakage of parts, mounting and any other conditions that may<br />

aect its operation. A guard or other part that is damaged should be properly<br />

repaired or replaced by an authorized service center unless otherwise indicated<br />

in this instruction manual. Have defective switches replaced by an authorized<br />

service facility. Don't use the tool if the switch does not turn it on and o.<br />

/// GUARD AGAINST ELECTRIC SHOCK.<br />

Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators,<br />

ranges, refrigerators).<br />

/// REPLACEMENT PARTS.<br />

When servicing a tool, use only identical replacement parts.<br />

/// VOLTAGE WARNING:<br />

Before connecting the tool to a power source (receptacle, outlet, etc.) Be sure the<br />

voltage supplied is the same as that specied on the nameplate of the tool. A<br />

power source with voltage greater than that specied for the tool can result in<br />

SERIOUS INJURY to the user V as well as damage to the tool. If in doubt, DO NOT<br />

PLUG IN THE TOOL. Using a power source with voltage less than the nameplate<br />

rating is harmful to the motor.<br />

Note<br />

• <strong>Makita</strong> reserves the right to change specications of parts and<br />

accessories without notice.<br />

• Items of standard equipment and specications may vary by<br />

country or area.<br />

• Net weight and dimensions may dier by the type of battery.<br />

• Standard export color for motor housing is <strong>Makita</strong> industrial green (blue).<br />

Guarantee<br />

Every <strong>Makita</strong> tool is thoroughly inspected and tested before leaving the<br />

factory. It is guaranteed against defective workmanship and materials. Should<br />

any trouble develop, return the COMPLETE tool prepaid to <strong>Makita</strong> or point of<br />

purchase. If inspection shows trouble is caused by defective workmanship of<br />

material, all repairs will be made without charge. The guarantee does not<br />

apply where repairs have been made or attempted by others; repairs are due<br />

to normal wear; the tool has been abused or in an accident; misuse is evident<br />

– caused by overloading the tool beyond its capacity, use of the tool after<br />

partial failure or use with improper accessories.<br />

• Please state required voltage when ordering. These oers are subject to<br />

availability in each country. Actual product color may dier slightly from<br />

color reproduced here.<br />

• The weight may dier depending on the attachment(s), including the battery<br />

cartridge. The lightest and heaviest combination, according to EPTA-Procedure<br />

01/2014


Safety<br />

Drilling<br />

(Wood / Metal)<br />

4<br />

3<br />

Wear eye protection Wear ear protection Wear a mask<br />

Drilling<br />

(Masonry)<br />

14<br />

Wear protective gloves<br />

Wear protective shoes<br />

Read the instruction manuals<br />

Remove plug from socket<br />

Materials<br />

Fastening<br />

Drill and<br />

Screw Bit Sets<br />

21<br />

26<br />

Stone<br />

Cutting<br />

29<br />

Reinforced concrete<br />

Concrete<br />

Red brick<br />

Brick<br />

Porous concrete<br />

Jigsaw /<br />

Recipro Sawing<br />

35<br />

Wood<br />

Brushing<br />

42<br />

Wood<br />

Wood with nails<br />

Pallet<br />

Laminate Sandwich panel Plywood<br />

Bonded Abrasive<br />

44<br />

Veneered wood<br />

Sandwich material<br />

Chipboard<br />

Metal<br />

Coated Abrasive<br />

50<br />

Metal<br />

Metal plates<br />

Aluminum<br />

Multi-tool<br />

55<br />

Sheet metal<br />

Non-ferrous metals<br />

Metal & Stainless<br />

Stainless steel<br />

Cast iron<br />

Diamond<br />

59<br />

Other Materials<br />

Planing /<br />

Routering<br />

65<br />

Glass bre reinforced plastic, epoxy<br />

Glass<br />

Wood and plastic combined<br />

Ceramic tiles Plastic Fiber cement board<br />

Dust Extraction<br />

Attachment<br />

73<br />

Perspex Aerated concrete block Wood and metal<br />

OPE<br />

75<br />

Plaster board


4<br />

ACCESSORIES<br />

Drilling (Wood/Metal)<br />

118°chisel edge<br />

135°split point<br />

HSS-R<br />

HSS-G<br />

HSS-Co 5%<br />

M-force<br />

HSS-TiN<br />

For SDS-PLUS Hammers<br />

Tungsten carbide tipped Use coolant. Do not drill with impact


Drilling (Wood / Metal) 5<br />

Accessories<br />

HSS metal drill bit series<br />

Range<br />

200<br />

Speed<br />

7<br />

M-force<br />

5<br />

HSS-TiN<br />

100<br />

1<br />

HSS-R<br />

2<br />

HSS-TiN<br />

economy<br />

3<br />

HSS-G<br />

4<br />

Double ended<br />

6<br />

HSS-TiN<br />

Impact drill<br />

8<br />

HSS-Co<br />

100<br />

150<br />

200 250<br />

300<br />

LIFE<br />

Material chart<br />

1 2 3 4 5 6 7 8<br />

Wood<br />

Plastic<br />

Non-ferrous<br />

metal ***<br />

Material<br />

Sheet steel<br />

Cast iron<br />

Alloy steel<br />

Stainless steel<br />

*Roll forged: Made by die-casted rolling machine. It is economical price.<br />

Ground: Drill bits ground from the block with excellent surface quality.<br />

**135°split point: Ensure no walking and start fast, on contact.<br />

M-shape: Designed to focus on drilling smoothly and speedily.<br />

***Non-ferrous metal (Such as Copper,<br />

Nickel and Zinc)


6<br />

Drilling (Wood / Metal)<br />

HSS-R Metal Drill Bit (Size: mm)<br />

Singles and Twins Packaging<br />

(Roll forged HSS drill bit)<br />

HSS-TiN Metal Drill Bit economy<br />

Singles and Twins Packaging<br />

(Half ground HSS drill bit)<br />

Blister Pack Packaging<br />

for easy disposal, specially for DIY shop.<br />

Bit ø<br />

Overall<br />

Length<br />

Working<br />

Length<br />

Piece<br />

per Pack<br />

Part<br />

No.<br />

1<br />

1.5<br />

2<br />

2.5<br />

2.6<br />

2.9<br />

3.0<br />

34<br />

40<br />

49<br />

57<br />

57<br />

61<br />

61<br />

12<br />

18<br />

24<br />

30<br />

30<br />

33<br />

33<br />

2<br />

2<br />

2<br />

2<br />

2<br />

2<br />

2<br />

D-38283<br />

D-38299<br />

D-38308<br />

D-38314<br />

D-38320<br />

D-46931<br />

D-38336<br />

3.2<br />

3.5<br />

4<br />

4.2<br />

4.5<br />

4.8<br />

5<br />

5.3<br />

5.5<br />

6<br />

6.5<br />

6.8<br />

7<br />

7.5<br />

8<br />

8.5<br />

8.8<br />

9<br />

10<br />

65<br />

70<br />

75<br />

75<br />

80<br />

86<br />

86<br />

86<br />

93<br />

93<br />

101<br />

109<br />

109<br />

109<br />

117<br />

117<br />

125<br />

125<br />

133<br />

36<br />

30<br />

43<br />

43<br />

47<br />

52<br />

52<br />

52<br />

57<br />

57<br />

63<br />

69<br />

69<br />

69<br />

75<br />

75<br />

81<br />

81<br />

87<br />

2<br />

2<br />

2<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

D-38342<br />

D-38358<br />

D-38364<br />

D-38370<br />

D-38386<br />

D-38392<br />

D-38401<br />

D-46947<br />

D-38417<br />

D-38423<br />

D-38439<br />

D-46953<br />

D-38445<br />

D-38451<br />

D-38467<br />

D-38473<br />

D-46969<br />

D-38489<br />

D-38495<br />

10.3 133 87 1 D-46975<br />

10.8<br />

11<br />

12<br />

142<br />

142<br />

151<br />

94<br />

94<br />

101<br />

1<br />

1<br />

1<br />

D-46981<br />

D-38504<br />

D-38510<br />

13 151 101 1 D-38526<br />

Bit ø<br />

Inches<br />

Overall<br />

Length<br />

Working<br />

Length<br />

Piece<br />

per Pack<br />

Part No.<br />

5/32" 3-1/8"<br />

11/64" 3-1/4"<br />

3/16" 3-1/2"<br />

7/32" 3-3/4"<br />

1/4" 4"<br />

5/16" 4-1/2"<br />

1/2" 6"<br />

2"<br />

2-1/8"<br />

2-5/16"<br />

2-1/2"<br />

2-3/4"<br />

3-3/16"<br />

4-1/2"<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

D-64565<br />

D-64571<br />

D-64587<br />

D-64602<br />

D-64624<br />

D-64668<br />

D-64783<br />

Blister Pack Packaging<br />

for easy disposal, specially for DIY shop.<br />

HSS-TiN 10pcs. Metal Drill Bit economy<br />

(Half ground HSS drill bit)<br />

Bit ø<br />

Inches<br />

9/64"<br />

3/16"<br />

13/64"<br />

1/4"<br />

Overall<br />

Length<br />

Working<br />

Length<br />

Piece<br />

per Pack<br />

2-7/8" 1-3/4" 10<br />

3-1/2" 2-5/16" 10<br />

3-5/8" 2-7/16" 10<br />

4" 2-3/4" 10<br />

Part No.<br />

D-64842<br />

D-64870<br />

D-64886<br />

D-64901<br />

Plastic Pouch Packaging


Drilling (Wood / Metal) 7<br />

HSS-G Metal Drill Bit (Size: inches)<br />

(Fully ground HSS drill bit)<br />

Blister Pack Packaging<br />

for easy disposal, specially for DIY shop.<br />

HSS-G 5pcs,10pcs. metal drill bit set<br />

Bit ø<br />

Inches<br />

Overall<br />

Length<br />

1/16" 1-7/8"<br />

5/64" 2"<br />

3/32" 2-1/4"<br />

7/64" 2-5/8"<br />

1/8" 2-3/4"<br />

5/32" 3-1/8"<br />

11/64" 3-1/4"<br />

3/16" 3-1/2"<br />

13/64" 3-5/8"<br />

7/32" 3-3/4"<br />

15/64" 3-7/8"<br />

1/4" 4"<br />

17/64" 4-18"<br />

9/32" 4-1/4"<br />

19/64" 4-3/8"<br />

5/16" 4-1/2"<br />

21/64" 4-5/8"<br />

11/32" 4-3/4"<br />

23/64" 4-7/8"<br />

3/8" 5"<br />

25/64" 5-1/8"<br />

13/32" 5-1/4"<br />

27/64" 5-3/8"<br />

7/16" 5-1/2"<br />

29/64" 5-5/8"<br />

15/32" 5-3/4"<br />

31/64" 5-7/8"<br />

1/2" 6"<br />

Bit ø<br />

Inches<br />

Overall<br />

Length<br />

Working<br />

Length<br />

Piece<br />

per Pack<br />

Part No.<br />

7/8" 2 D-22230<br />

1" 2 D-22246<br />

1-1/4" 2 D-22252<br />

1-1/2" 2 D-22268<br />

1-5/8" 2 D-22274<br />

2" 1 D-22296<br />

2-1/8" 1 D-22305<br />

2-5/16" 1 D-22311<br />

2-7/16" 1 D-22327<br />

2-1/2" 1 D-22333<br />

2-5/8" 1 D-22349<br />

2-3/4" 1 D-22355<br />

2-7/8" 1 D-22361<br />

2-15/16" 1 D-22377<br />

3-3/16" 1 D-22383<br />

3-3/16" 1 D-22399<br />

3-5/16" 1 D-22408<br />

3-7/16" 1 D-22414<br />

3-1/2" 1 D-22420<br />

3-5/8" 1 D-22436<br />

3-3/4" 1 D-22442<br />

3-7/8" 1 D-22458<br />

3-15/16" 1 D-22464<br />

4-1/16" 1 D-22470<br />

4-3/16" 1 D-22486<br />

4-5/16" 1 D-22492<br />

4-3/8" 1 D-22501<br />

4-1/2" 1 D-22517<br />

Working<br />

Length<br />

Piece<br />

per Pack<br />

Part No.<br />

Blister Pack Packaging<br />

1/16"<br />

5/64"<br />

3/32"<br />

7/64"<br />

1/8"<br />

9/64"<br />

5/32"<br />

11/64"<br />

3/16"<br />

13/64"<br />

7/32"<br />

15/64"<br />

1/4"<br />

17/64"<br />

9/32"<br />

19/64"<br />

5/16"<br />

21/64"<br />

11/32"<br />

23/64"<br />

3/8"<br />

25/64"<br />

13/32"<br />

27/64"<br />

7/16"<br />

29/64"<br />

15/32"<br />

31/64"<br />

1/2"<br />

1-7/8" 7/8" 10 D-21945<br />

2" 1" 10 D-21951<br />

2-1/4" 1-1/4" 10 D-21967<br />

2-5/8" 1-1/2" 10 D-21973<br />

2-3/4" 1-5/8" 10 D-21989<br />

2-7/8" 1-3/4" 10 D-21995<br />

3-1/8" 2" 10 D-22006<br />

3-1/4" 2-1/8" 10 D-22012<br />

3-1/2" 2-5/16" 10 D-22028<br />

3-5/8" 2-7/16" 10 D-22034<br />

3-3/4" 2-1/2" 10 D-22040<br />

3-7/8" 2-5/8" 10 D-22056<br />

4" 2-3/4" 10 D-22062<br />

4-18" 2-7/8" 10 D-22078<br />

4-1/4" 2-15/16" 10 D-22084<br />

4-3/8" 3-1/16" 10 D-22096<br />

4-1/2" 3-3/16" 10 D-22109<br />

4-5/8" 3-5/16" 5 D-22115<br />

4-3/4" 3-7/16" 5 D-22121<br />

4-7/8" 3-1/2" 5 D-22137<br />

5" 3-5/8" 5 D-22143<br />

5-1/8" 3-3/4" 5 D-22159<br />

5-1/4" 3-7/8" 5 D-22165<br />

5-3/8" 3-15/16" 5 D-22171<br />

5-1/2" 4-1/16" 5 D-22187<br />

5-5/8" 4-3/16" 5 D-22193<br />

5-3/4" 4-5/16" 5 D-22202<br />

5-7/8" 4-3/8" 5 D-22218<br />

6" 4-1/2" 5 D-22224


8<br />

Drilling (Wood / Metal)<br />

HSS-Co Metal Drill Bit (Cobalt 5%)<br />

(Size: inches)<br />

(Fully ground HSS drill bit)<br />

Blister Pack Packaging<br />

for easy disposal, specially for DIY shop.<br />

Bit ø<br />

(Inches)<br />

Overall<br />

Length<br />

Working<br />

Length<br />

Piece<br />

per Pack<br />

Part No.<br />

1/16" 1-7/8" 7/8" 2 D-22523<br />

5/64" 2" 1" 2 D-22539<br />

3/32" 2-1/4" 1-1/4" 2 D-22545<br />

7/64" 2-5/8" 1-1/2" 2 D-22551<br />

1/8" 2-3/4" 1-5/8" 2 D-22567<br />

9/64" 2-7/8" 1-3/4" 2 D-22573<br />

5/32" 3-1/8" 2" 1 D-22589<br />

11/64" 3-1/4" 2-1/8" 1 D-22595<br />

3/16" 3-1/2" 2-5/16" 1 D-22604<br />

13/64" 3-5/8" 2-7/16" 1 D-22610<br />

7/32" 3-3/4" 2-1/2" 1 D-22626<br />

15/64" 3-7/8" 2-5/8" 1 D-22632<br />

1/4" 4" 2-3/4" 1 D-22648<br />

17/64" 4-18" 2-7/8" 1 D-22654<br />

9/32" 4-1/4" 2-15/16" 1 D-22660<br />

19/64" 4-3/8" 3-1/16" 1 D-22676<br />

5/16" 4-1/2" 3-3/16" 1 D-22682<br />

21/64" 4-5/8" 3-5/16" 1 D-22698<br />

11/32" 4-3/4" 3-7/16" 1 D-22707<br />

23/64" 4-7/8" 3-1/2" 1 D-22713<br />

3/8" 5" 3-5/8" 1 D-22729<br />

25/64" 5-1/8" 3-3/4" 1 D-22735<br />

13/32" 5-1/4" 3-7/8" 1 D-22741<br />

27/64" 5-3/8" 3-15/16" 1 D-22757<br />

7/16" 5-1/2" 4-1/16" 1 D-22763<br />

29/64" 5-5/8" 4-3/16" 1 D-22779<br />

15/32" 5-3/4" 4-5/16" 1 D-22785<br />

31/64" 5-7/8" 4-3/8" 1 D-22791<br />

1/2" 6" 4-1/2" 1 D-22800<br />

Bit ø<br />

(mm)<br />

Overall<br />

Length<br />

Working<br />

Length<br />

Piece<br />

per Pack<br />

Part No.<br />

1/16" 3.0 1-7/8" 61 7/8" 33 21 D-22523 D-17310<br />

4.0 75 43 1 D-17348<br />

3/32" 5.6 2-1/4" 86 1-1/4" 52 21 D-22545 D-17360<br />

6.0 93 57 1 D-17382<br />

1/8" 8.0 2-3/4" 117 1-5/8" 75 21<br />

D-17429<br />

10.0 133 87 1 D-17463<br />

5/32" 13.0 3-1/8" 151 101 2" 1 D-17522<br />

HSS-Co 5pcs. metal drill bit (Cobalt 5%)<br />

(Size: inches)<br />

Blister Pack Packaging<br />

Bit ø<br />

Inches<br />

1/16" 1-7/8" 7/8" 5 D-22816<br />

5/64" 2" 1" 5 D-22822<br />

3/32" 2-1/4" 1-1/4" 5 D-22838<br />

7/64" 2-5/8" 1-1/2" 5 D-22844<br />

1/8" 2-3/4" 1-5/8" 5 D-22850<br />

9/64" 2-7/8" 1-3/4" 5 D-22866<br />

5/32" 3-1/8" 2" 5 D-22872<br />

11/64" 3-1/4" 2-1/8" 5 D-22888<br />

3/16" 3-1/2" 2-5/16" 5 D-22894<br />

13/64" 3-5/8" 2-7/16" 5 D-22903<br />

7/32" 3-3/4" 2-1/2" 5 D-22919<br />

15/64" 3-7/8" 2-5/8" 5 D-22925<br />

1/4" 4" 2-3/4" 5 D-22931<br />

17/64" 4-18" 2-7/8" 5 D-22947<br />

9/32" 4-1/4" 2-15/16" 5 D-22953<br />

5/16" 4-1/2" 3-3/16" 5 D-22975<br />

3/8" 5" 3-5/8" 5 D-23014<br />

7/16" 5-1/2" 4-1/16" 5 D-23058<br />

29/64" 5-5/8" 4-3/16" 5 D-23064<br />

1/2"<br />

Overall<br />

Length<br />

6"<br />

Working<br />

Length<br />

4-1/2"<br />

Piece<br />

per Pack<br />

5<br />

Part No.<br />

D-23092


Drilling (Wood / Metal) 9<br />

HSS-R Metal Drill Bit Set<br />

(Size: mm)<br />

(Roll forged HSS drill bit)<br />

HSS-Tin metal drill bit assortment<br />

with 1/4" Hex. shank<br />

Per pkg.<br />

Included holesaws (1 each)<br />

Part No.<br />

13 pcs Metal Box set<br />

5pcs.<br />

Assortment<br />

1/8", 5/32", 3/16", 1/4", 5/16",<br />

(1pc. each)<br />

D-35318<br />

HSS-TiN metal drill bit economy assortment<br />

Part No.<br />

D-54075<br />

Set contents<br />

1.5, 2.0, 2.5, 3.0, 3.2, 3.5<br />

4.0, 4.5, 4.8, 5.0, 5.5, 6.0, 6.5<br />

Per pkg.<br />

19 pcs. HSS-TiN Injection<br />

metal case drill set bit set<br />

D-72453<br />

Included Set holesaws contents(1 each)<br />

1.5×2, 2×2, 2.5×2, 3×2, 3.2, 3.5, 4, 4.5, 5,<br />

5.5, 6, 6.5, 7, 8, 10mm<br />

Part No.<br />

D-67527<br />

19 pcs Metal Box set<br />

18 pcs HSS-TiN<br />

metal drill bit set<br />

2x1/16",5/64,2x3/32",7/64",2x1/8", 9/64"<br />

5/32",11/64", 3/16", 13/64", 7/32", 1/4", 5/16"<br />

3/8",1/2"<br />

D-70471<br />

29 pcs HSS-TiN<br />

metal drill bit set<br />

1/16" - 1/2"<br />

D-72453<br />

Step drill bit straight flute<br />

tanium coa ng<br />

Part No.<br />

D-54081<br />

Set contents<br />

1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5<br />

5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0<br />

8.5, 9.0, 9.5, 10.0<br />

Straight shank<br />

(Three at)<br />

25 pcs Metal Box set<br />

1/4"Hex(NZ)<br />

Blister Pack Packaging<br />

Bit<br />

diameter<br />

(mm)<br />

1/4"Hex(NZ)<br />

4 - 12<br />

Overall<br />

length<br />

(mm)<br />

65<br />

Working<br />

length<br />

(mm)<br />

45<br />

Per<br />

pkg.<br />

1<br />

Part<br />

No.<br />

D-46436<br />

4 - 20<br />

4 - 32<br />

75<br />

Straight shank (Three at)<br />

102<br />

53<br />

80<br />

1<br />

1<br />

D-46442<br />

D-40135<br />

Part No.<br />

Set contents<br />

Step drill bit spiral flute<br />

tanium coa ng<br />

D-54097<br />

1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5<br />

5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 8.5,<br />

9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0,<br />

12.5, 13.0<br />

HSS-TiN impact drill bit set<br />

with 1/4'' Hex shank<br />

Straight shank<br />

(Three at)<br />

1/4"Hex(NZ)<br />

Blister Pack Packaging<br />

Per pkg.<br />

5pcs.<br />

Assortment<br />

Included holesaws (1 each)<br />

3, 4, 5, 6, 8<br />

(1pc. each)<br />

Part No.<br />

B-57308<br />

Bit<br />

diameter<br />

(mm)<br />

1/4"Hex(NZ)<br />

4 - 12<br />

4 - 20<br />

4 - 32<br />

Overall<br />

length<br />

(mm)<br />

65<br />

75<br />

Straight shank (Three at)<br />

102<br />

Working<br />

length<br />

(mm)<br />

45<br />

53<br />

80<br />

Per<br />

pkg.<br />

1<br />

1<br />

1<br />

Part<br />

No.<br />

D-46470<br />

D-46486<br />

D-40191


10<br />

Drilling (Wood / Metal)<br />

Countersink bit with five 90 °<br />

cutting edges<br />

Spare blade<br />

For Adjustable circle cutter<br />

Per pkg.<br />

2<br />

Part No.<br />

D-57118<br />

Blister Pack Packaging<br />

Bit<br />

diameter<br />

(mm)<br />

6<br />

8<br />

10<br />

12<br />

16<br />

20<br />

Forstner bit<br />

Self feeding bit with 7/16'' Hex. shank<br />

Paper case<br />

packaging<br />

Overall<br />

length<br />

(mm)<br />

48<br />

48<br />

40<br />

40<br />

43<br />

45<br />

Paper case<br />

packaging<br />

Adjustable circle cu er<br />

Size (mm)<br />

Part No.<br />

Application<br />

M3<br />

M4<br />

M5<br />

M6<br />

M8<br />

M10<br />

Bit<br />

diameter<br />

(inches) (mm)<br />

1"<br />

1-1/8"<br />

1-1/4"<br />

1-3/8"<br />

1-1/2"<br />

1-3/4"<br />

2"<br />

2-1/8"<br />

2-1/4"<br />

2-9/16"<br />

3"<br />

Per<br />

pkg.<br />

Bit<br />

diameter<br />

(mm)<br />

10<br />

15<br />

20<br />

25<br />

26<br />

30<br />

32<br />

35<br />

40<br />

50<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

25<br />

28<br />

32<br />

35<br />

38<br />

45<br />

51<br />

54<br />

57<br />

65<br />

76<br />

Part<br />

No.<br />

D-37378<br />

D-37384<br />

D-37390<br />

D-37409<br />

D-37415<br />

D-37421<br />

Part<br />

No.<br />

D-41844<br />

D-41925<br />

D-42232<br />

D-42248<br />

D-42254<br />

D-42260<br />

D-42276<br />

D-42282<br />

D-42298<br />

D-42307<br />

Part<br />

No.<br />

D-29935<br />

D-29957<br />

D-29963<br />

D-29979<br />

D-29985<br />

D-29991<br />

D-30003<br />

D-30019<br />

D-30025<br />

D-30031<br />

D-30047<br />

Single spur auger bit with straight shank<br />

Flat bit<br />

Blister pack<br />

packaging<br />

Blister Pack Packaging<br />

Bit<br />

diameter<br />

1/4"<br />

5/16"<br />

3/8"<br />

1/2"<br />

9/16"<br />

5/8"<br />

11/16"<br />

3/4"<br />

7/8"<br />

15/16"<br />

5/16"<br />

3/8"<br />

1/2"<br />

9/16"<br />

5/8“<br />

11/16"<br />

3/4“<br />

7/8"<br />

15/16“<br />

1"<br />

1-1/8“<br />

1-1/4"<br />

Overall<br />

length<br />

Bit<br />

diameter<br />

(mm)<br />

1/4"<br />

5/16"<br />

3/8"<br />

7/16"<br />

1/2"<br />

9/16"<br />

5/8"<br />

11/16"<br />

3/4"<br />

7/8"<br />

15/16"<br />

1"<br />

1-1/8"<br />

1-1/4"<br />

1-3/8"<br />

1-1/2"<br />

10"<br />

10"<br />

10"<br />

10"<br />

10"<br />

10"<br />

10"<br />

10"<br />

10"<br />

10"<br />

18"<br />

18"<br />

18"<br />

18"<br />

18"<br />

18"<br />

18"<br />

18"<br />

18"<br />

18"<br />

18"<br />

18"<br />

Working<br />

length<br />

Overall<br />

length<br />

(mm)<br />

6"<br />

6"<br />

6"<br />

6"<br />

6"<br />

6"<br />

6"<br />

6"<br />

6"<br />

6"<br />

6"<br />

6"<br />

7"<br />

7"<br />

7"<br />

7"<br />

7"<br />

7"<br />

7"<br />

7"<br />

7"<br />

7"<br />

15"<br />

15"<br />

15"<br />

15"<br />

15"<br />

15"<br />

15"<br />

15"<br />

15"<br />

15"<br />

15"<br />

15"<br />

6-1/2"<br />

6-1/2"<br />

6-1/2"<br />

6-1/2"<br />

Part<br />

No.<br />

D-23416<br />

D-23422<br />

D-23438<br />

D-23444<br />

D-23450<br />

D-23466<br />

D-23472<br />

D-23488<br />

D-23494<br />

D-23503<br />

D-23634<br />

D-23640<br />

D-23656<br />

D-23662<br />

D-23678<br />

D-23684<br />

D-23690<br />

D-23709<br />

D-23715<br />

D-23721<br />

D-23737<br />

D-23743<br />

Part<br />

No.<br />

D-24505<br />

D-24511<br />

D-24527<br />

D-24533<br />

D-26490<br />

D-24549<br />

D-24561<br />

D-24577<br />

D-24583<br />

D-24599<br />

D-24608<br />

D-24614<br />

D-24636<br />

D-24658<br />

D-24670<br />

D-26509<br />

30 - 200<br />

D-57102


Drilling (Wood / Metal) Recommended Acceptable 11<br />

Application<br />

Steel<br />

Inox<br />

Stainless<br />

Aluminum<br />

Non<br />

ferrous<br />

Metal<br />

Wood MDF PLASTER<br />

BOARD<br />

PVC FRP SOFT<br />

TILE<br />

Brick<br />

Lime<br />

stone<br />

Marble<br />

BiM<br />

BiM for sheet metal<br />

Multi purpose TCT<br />

TCT<br />

Vacuum brazed diamond<br />

BiM hole saw<br />

Hole saws have 4/6 variable pitch tooth design and are<br />

recommended for cutting, steel plates, aluminum, copper<br />

brass, wood and plastic.<br />

Accessories for BiM hole saw<br />

Pilot drill<br />

Adapter<br />

Bit<br />

diameter<br />

(mm)<br />

14<br />

16<br />

17<br />

19<br />

20<br />

21<br />

Working<br />

length<br />

(mm)<br />

38<br />

38<br />

38<br />

38<br />

38<br />

38<br />

Part<br />

No.<br />

D-35368<br />

D-16994<br />

D-35374<br />

D-17005<br />

D-17251<br />

D-35380<br />

List<br />

Price<br />

155.00<br />

160.00<br />

165.00<br />

173.00<br />

180.00<br />

190.00<br />

Bit<br />

diameter<br />

(mm)<br />

57<br />

59<br />

60<br />

64<br />

65<br />

67<br />

Working<br />

length<br />

(mm)<br />

38<br />

38<br />

38<br />

38<br />

38<br />

38<br />

Blister pack packaging<br />

Part<br />

No.<br />

D-17099<br />

D-35499<br />

D-25688<br />

D-30140<br />

D-24882<br />

D-35508<br />

10 mm<br />

Application<br />

For 10mm drill<br />

For 13mm drill<br />

13 mm<br />

Adapter with pilot drill<br />

Pilot drill<br />

Fits holesaws<br />

14 - 29mm<br />

32 - 152mm<br />

Pilot drill<br />

BiM holesaw assortment<br />

Most six common sizes for Plumber & Electrician.<br />

Part No.<br />

D-17170<br />

D-17186<br />

Length 71mm All D-17192<br />

10 mm 13 mm<br />

Adapter with pilot drill<br />

22<br />

24<br />

25<br />

38<br />

38<br />

38<br />

D-17011<br />

D-17027<br />

D-17033<br />

195.00<br />

198.00<br />

203.00<br />

68<br />

70<br />

73<br />

38<br />

38<br />

38<br />

D-17108<br />

D-25694<br />

D-35514<br />

A: 11mm (7/16'')<br />

Adapter with pilot drill<br />

B: 9.5mm (3/8'')<br />

Adapter with pilot drill<br />

27<br />

29<br />

38<br />

38<br />

D-35396<br />

D-17267<br />

225.00<br />

235.00<br />

76<br />

79<br />

38<br />

38<br />

D-17114<br />

D-35520<br />

C: Ejector spring<br />

30<br />

32<br />

38<br />

38<br />

D-35405<br />

D-17049<br />

240.00<br />

256.00<br />

80<br />

83<br />

38<br />

38<br />

D-33869<br />

D-17120<br />

Suitable for<br />

Included holesaws (1 each)<br />

Part No.<br />

33<br />

35<br />

37<br />

38<br />

40<br />

38<br />

38<br />

38<br />

38<br />

51<br />

D-35411<br />

D-17055<br />

D-35427<br />

D-17061<br />

D-17273<br />

260.00<br />

265.00<br />

280.00<br />

284.00<br />

296.00<br />

86<br />

89<br />

92<br />

95<br />

98<br />

38<br />

38<br />

38<br />

38<br />

38<br />

D-35536<br />

D-35542<br />

D-17136<br />

D-35558<br />

D-35564<br />

For Plumber<br />

For Electrician<br />

For Electrician<br />

19,22,29,38,44,57mm, adapter A, adapter B,<br />

ejector spring<br />

16,20,25,32,40,51mm, adapter A, adapter B,<br />

ejector spring<br />

20,25,32,40,51mm, adapter A, adapter B,<br />

ejector spring<br />

D-47117<br />

D-47123<br />

D-47139<br />

41<br />

54<br />

D-35433<br />

300.00<br />

102<br />

38<br />

D-35570<br />

43<br />

57<br />

D-35449<br />

325.00<br />

105<br />

38<br />

D-17142<br />

44<br />

65<br />

D-17077<br />

325.00<br />

108<br />

38<br />

D-35586<br />

46<br />

76<br />

D-35455<br />

337.00<br />

111<br />

38<br />

D-35592<br />

48<br />

25<br />

D-35461<br />

348.00<br />

114<br />

38<br />

D-35601<br />

51<br />

52<br />

54<br />

56<br />

28<br />

32<br />

35<br />

38<br />

D-17083<br />

D-35477<br />

D-24876<br />

D-35483<br />

358.00<br />

367.00<br />

370.00<br />

388.00<br />

121<br />

127<br />

140<br />

152<br />

38<br />

38<br />

38<br />

38<br />

D-35617<br />

D-17158<br />

D-35623<br />

D-17164<br />

Suitable for<br />

For Plumber<br />

For Electrician<br />

Included holesaws (1 each)<br />

19,22,25,29,35,38,44,51,57,65,75mm,<br />

adapter A, adapter B, ejector spring<br />

19,22,29,35,38,51,54,57,68mm,<br />

adapter A, adapter B, ejector spring<br />

Part No.<br />

D-63971<br />

D-63987<br />

For General<br />

Use<br />

16,19,22,25,32,35,37,44,51,57,64,68,76mm,<br />

adapter A, adapter B, ejector spring<br />

D-63993


12<br />

Drilling (Wood / Metal)<br />

BiM hole saw for sheet metal<br />

Use with adapter with HSS pilot drill<br />

Multi purpose TCT Holesaw<br />

Use with adapter with pilot drill<br />

Blister pack packaging<br />

Bit<br />

diameter<br />

(mm)<br />

16<br />

17<br />

19<br />

20<br />

21<br />

22<br />

25<br />

33<br />

38<br />

41<br />

48<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

Part<br />

No.<br />

List<br />

Price<br />

51<br />

57<br />

64<br />

67<br />

79<br />

86<br />

102<br />

152<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

Part<br />

No.<br />

29 20 B-29751 300.00 70 20 B-36027<br />

32 20 B-29773 322.00 76 20 B-36049<br />

35<br />

40<br />

44<br />

Working<br />

length<br />

(mm)<br />

20<br />

20<br />

27 20 B-29745 280.00 68 20 B-36011<br />

30 20 B-29767 305.00 73 20 B-36033<br />

20<br />

20<br />

20<br />

B-29670<br />

B-29686<br />

B-29692<br />

B-29701<br />

B-29717<br />

B-29723<br />

B-29739<br />

B-29789<br />

B-29795<br />

B-29804<br />

B-29810<br />

B-29826<br />

B-29832<br />

B-29848<br />

210.00<br />

210.00<br />

223.00<br />

231.00<br />

242.00<br />

249.00<br />

260.00<br />

327.00<br />

331.00<br />

365.00<br />

370.00<br />

387.00<br />

410.00<br />

440.00<br />

Bit<br />

diameter<br />

(mm)<br />

54<br />

60<br />

65<br />

83<br />

89<br />

127<br />

Working<br />

length<br />

(mm)<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

Blister pack packaging<br />

B-29854<br />

B-29860<br />

B-29876<br />

B-29882<br />

B-29898<br />

B-35994<br />

B-36005<br />

B-36055<br />

B-36061<br />

B-36077<br />

B-36083<br />

B-36099<br />

B-36108<br />

B-36114<br />

Bit<br />

diameter<br />

(mm)<br />

19<br />

22<br />

25<br />

29<br />

30<br />

50<br />

54<br />

57<br />

50<br />

60<br />

60<br />

60<br />

60<br />

60<br />

60<br />

Part<br />

No.<br />

List<br />

Price<br />

60<br />

65<br />

68<br />

85<br />

95<br />

60<br />

60<br />

60<br />

60<br />

60<br />

Part<br />

No.<br />

35 60 D-42737 715.00 73 60 D-45026<br />

40 60 D-42759 750.00 79 60 D-45048<br />

48 60 D-42771 900.00 83 60 D-45347<br />

51<br />

55<br />

Working<br />

length<br />

(mm)<br />

60<br />

60<br />

60<br />

D-42678<br />

D-42684<br />

D-42690<br />

D-42709<br />

D-42715<br />

32 60 D-42721 700.00 70 60 D-42880<br />

38 60 D-42743 750.00 76 60 D-45032<br />

45 60 D-42765 825.00 80 60 D-45331<br />

D-42787<br />

D-42793<br />

D-42802<br />

D-42818<br />

D-42824<br />

625.00<br />

625.00<br />

625.00<br />

700.00<br />

700.00<br />

900.00<br />

940.00<br />

960.00<br />

975.00<br />

1,015.00<br />

Bit<br />

diameter<br />

(mm)<br />

64<br />

67<br />

89<br />

102<br />

Accessories for Multi purpose TCT Holesaw<br />

Adapter with HSS pilot drill<br />

For 13mm drill<br />

Working<br />

length<br />

(mm)<br />

60<br />

60<br />

60<br />

60<br />

D-42830<br />

D-42846<br />

D-42852<br />

D-42868<br />

D-42874<br />

D-45353<br />

D-45369<br />

D-50304<br />

D-50310<br />

105 60 D-50326<br />

Accessories for BiM holesaw for sheet metal<br />

Adapter with HSS pilot drill<br />

Pilot drill<br />

Application<br />

Adapter with pilot drill<br />

For 10mm drill<br />

For 13mm drill<br />

Pilot drill<br />

Fits holesaws<br />

16 - 35mm<br />

38 - 152mm<br />

Pilot drill<br />

13 mm 10 mm<br />

Adapter with HSS pilot drill<br />

Part No.<br />

B-36120<br />

B-36136<br />

Length 60mm All B-36142<br />

BiM holesaw for sheet metal assortment<br />

Adapter with pilot drill<br />

For 13mm drill<br />

For SDS-PLUS Hummer<br />

For 13mm drill<br />

For SDS-PLUS Hummer<br />

For 13mm drill<br />

For SDS-PLUS Hummer<br />

For 13mm drill<br />

For SDS-PLUS Hummer<br />

Pilot drill<br />

List price<br />

HSS pilot drill<br />

φ8mmx100mm<br />

TCT pilot drill φ10x100mm<br />

HSS pilot drill φ6.35x90mm<br />

TCT pilot drill φ8x90mm<br />

TCT Hole saw assortment<br />

For SDS-PLUS Hummer<br />

Type of<br />

pilot<br />

drill<br />

TCT<br />

TCT<br />

TCT<br />

TCT<br />

HSS<br />

HSS<br />

HSS<br />

HSS<br />

HSS<br />

TCT<br />

HSS<br />

TCT<br />

Fits<br />

holesaws<br />

22 - 105mm<br />

22 - 32mm<br />

19mm<br />

19mm<br />

22 - 105mm<br />

22 - 32mm<br />

19mm<br />

19mm<br />

22 - 105mm<br />

22 - 105mm<br />

19mm<br />

19mm<br />

Part No.<br />

D-50332<br />

D-50348<br />

D-50354<br />

D-50360<br />

D-50376<br />

D-50382<br />

D-50398<br />

D-50407<br />

D-50413<br />

D-50429<br />

D-50435<br />

D-50441<br />

Suitable for<br />

For Plumber<br />

For Electrician<br />

Included holesaws (1 each)<br />

19,22,25,29,38,44,57mm holesaws,<br />

9.5/11mm adapter with 1 pc. pilot drill<br />

20,25,32,38,51,64mm holesaws,<br />

9.5/11mm adapter with 1 pc. pilot drill<br />

Part No.<br />

B-38663<br />

B-38679<br />

Suitable for<br />

For Plumber<br />

For Electrician<br />

Included holesaws (1 each)<br />

22,25,29,35,38,45,51mm, adapter :<br />

11mm (7/16") hex,<br />

TCT pilot drill, HSS pilot drill<br />

22,35,51,57,64,76mm, adapter :<br />

11mm (7/16") hex,<br />

TCT pilot drill, HSS pilot drill<br />

Part No.<br />

D-51281<br />

D-51297


Drilling (Wood / Metal) 13<br />

TCT holesaw & Center drill<br />

High quality carbide ps brazed on to the cu ng edge enable<br />

high speed drilling of material up to 4mm in thickness with<br />

no coolant required.<br />

Carbide ps are random-spaced to reduce cha ering noise.<br />

Not for percussion / hammering applica ons.<br />

Vacuum brazed diamond holesaw<br />

Use with shank with Pilot Drill<br />

Recommended for:<br />

So les, Brick, Lime stone.<br />

Bit<br />

diameter<br />

(mm)<br />

16<br />

18<br />

20<br />

38<br />

45<br />

6<br />

6<br />

6<br />

10<br />

10<br />

Part<br />

No.<br />

List<br />

Price<br />

48<br />

55<br />

95<br />

110<br />

10<br />

10<br />

13<br />

13<br />

Blister pack packaging<br />

Part<br />

No.<br />

21 6 B-00929 2,780.00 60 13 B-01068<br />

22 6 B-00935 2,780.00 65 13 B-01074<br />

25 10 B-00941 2,780.00 68 13 B-02652<br />

27 10 B-00957 3,220.00 70 13 B-01080<br />

28 10 B-00963 3,220.00 75 13 B-01096<br />

30 10 B-00979 3,220.00 80 13 B-01105<br />

32 10 B-00985 3,720.00 85 13 B-01111<br />

35 10 B-00991 3,720.00 90 13 B-01127<br />

40<br />

Working<br />

length<br />

(mm)<br />

10<br />

B-00898<br />

B-00907<br />

B-00913<br />

B-01002<br />

B-01018<br />

B-01024<br />

2,780.00<br />

2,780.00<br />

2,780.00<br />

4,330.00<br />

4,330.00<br />

5,000.00<br />

Bit<br />

diameter<br />

(mm)<br />

50<br />

100<br />

Working<br />

length<br />

(mm)<br />

10<br />

13<br />

B-01030<br />

B-01046<br />

B-01052<br />

B-01133<br />

B-01149<br />

B-01155<br />

120 13 B-01161<br />

Bit<br />

diameter<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

Part<br />

No.<br />

List<br />

Price<br />

Bit<br />

diameter<br />

(mm)<br />

Blister pack packaging<br />

Working<br />

length<br />

(mm)<br />

Part<br />

No.<br />

16 40 B-45995 930.00 38 40 B-46056<br />

19 40 B-46006 1,100.00 45 40 B-46062<br />

25 40 B-46012 1,440.00 50 40 B-46078<br />

30 40 B-46028 1,720.00 53 40 B-46084<br />

32 40 B-46034 1,830.00 57 40 B-46090<br />

35 40 B-46040 2,000.00 64 40 B-46109<br />

Accessories for Vacuum brazed diamond holesaw<br />

Shank (Fits All Diamond Hole Saw)<br />

Pilot drill<br />

Application<br />

Bit diameter<br />

(mm)<br />

Part No.<br />

Center drill<br />

Plastic tube pack packaging<br />

Shank (Fits all diamond holesaw)<br />

For 13mm Drill - B-46137<br />

Pilot drill<br />

For 13mm Drill TCT B-46121<br />

Application<br />

Bit diameter<br />

(mm)<br />

Part No.<br />

Steel, etc.<br />

Steel, etc.<br />

FRP, resin, etc.<br />

FRP, resin, etc.<br />

16 - 55<br />

60 - 120<br />

16 - 55<br />

60 - 120<br />

B-01177<br />

B-01183<br />

B-01199<br />

B-01208<br />

Shank (Fits All Diamond Hole Saw)<br />

Pilot drill<br />

Diamond<br />

holesaw<br />

Carbon Steel Hole Saw 6 pcs.<br />

Suitable for soft metal<br />

Drill Chuck Set (1/4" Hex Shank)<br />

(1/4" Hex Shank to 3/8" Drill Chuck)<br />

For Impact Driver<br />

Included Hole saw (1 each)<br />

32,38,48,54,64mm, Adapter<br />

with pilot drill (10mm)<br />

Part No.<br />

D-70203<br />

Part No.<br />

195121-2


14<br />

ACCESSORIES<br />

Drilling (Masonry)<br />

For SDS-PLUS Hammers<br />

For SDS-MAX Hammers<br />

17 mm Hex<br />

19 mm Hex<br />

21mm Hex 28.6mm Hex 30mm Hex <strong>Makita</strong> Small


Drilling (Masonry) 15<br />

For Straight shank<br />

Glass bit with Straight shank<br />

T.C.T drill bit with Straight shank<br />

Plastic pouch<br />

packaging<br />

Bit<br />

dia<br />

(mm)<br />

Bit dia<br />

(mm)<br />

Length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

Shank<br />

dia<br />

(mm)<br />

Piece<br />

per<br />

pack<br />

T.C.T drill bit 5 pcs. set with Straight shank<br />

*5 different sizes<br />

Tile<br />

Brick<br />

Bit dia.<br />

(mm)<br />

4<br />

5<br />

6, 8, 10<br />

Bit dia.<br />

(mm)<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

70 35<br />

85 45<br />

100 60<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

5, 6, 7, 8, 10 110 60<br />

T.C.T drill bit with Straight shank/ Omnibohrer<br />

*5 different sizes<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

30<br />

Shank<br />

dia<br />

(mm)<br />

2.7<br />

Piece<br />

per<br />

pack<br />

1<br />

Part<br />

No.<br />

Part No.<br />

D-05175<br />

Part No.<br />

D-20719<br />

Percussion sharpened high resistance carbide tip with reinforced head.<br />

Can drill multiplicity of materials without changing drill bit<br />

(ideal for doors, shelves, window frames etc).<br />

Use with rotary or percussion drills. Without percussion use on vitrified brick, wood,<br />

brick. With percussion use on , block, stone, plaster most grades of concrete.<br />

Plastic pouch<br />

packaging<br />

3<br />

4<br />

5<br />

6<br />

8<br />

10<br />

12<br />

13<br />

3<br />

4<br />

5<br />

6<br />

8<br />

10<br />

10<br />

12<br />

12<br />

13<br />

14<br />

16<br />

16<br />

60<br />

70<br />

85<br />

150<br />

150<br />

150<br />

150<br />

150<br />

60<br />

70<br />

85<br />

150<br />

150<br />

150<br />

400<br />

150<br />

400<br />

150<br />

150<br />

150<br />

400<br />

40<br />

55<br />

100<br />

100<br />

100<br />

100<br />

100<br />

30<br />

35<br />

45<br />

60<br />

90<br />

90<br />

350<br />

90<br />

350<br />

90<br />

85<br />

90<br />

350<br />

3.5<br />

4.5<br />

5<br />

7<br />

8.4<br />

9.4<br />

10<br />

2.7<br />

3.5<br />

4.5<br />

5<br />

7<br />

8.4<br />

8.4<br />

9.4<br />

9.4<br />

10<br />

10<br />

10<br />

10<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

D-05228<br />

D-05234<br />

D-05240<br />

D-05262<br />

D-05309<br />

D-05321<br />

D-18960<br />

D-05343<br />

D-17697<br />

D-05359<br />

D-05365<br />

D-05387<br />

D-17706<br />

Part<br />

No.<br />

D-30287<br />

D-30293<br />

D-30302<br />

D-30324<br />

D-30368<br />

D-30380<br />

D-30411<br />

D-30449<br />

Plastic pouch<br />

packaging<br />

Bit<br />

dia<br />

(mm)<br />

3<br />

4<br />

5<br />

6<br />

8<br />

10<br />

12<br />

Overall<br />

length<br />

(mm)<br />

65<br />

65<br />

65<br />

65<br />

70<br />

80<br />

80<br />

Shank<br />

type<br />

Straight<br />

Straight<br />

Straight<br />

Straight<br />

Straight<br />

Straight<br />

Straight<br />

Piece<br />

per<br />

pack<br />

T.C.T drill bit for SDS-PLUS hammers / 2 cutters<br />

Plastic pouch<br />

packaging<br />

Bit<br />

diameter<br />

(mm)<br />

4<br />

5<br />

5.5<br />

6<br />

6.5<br />

7<br />

8<br />

9<br />

9.5<br />

10<br />

11<br />

12<br />

12.7<br />

13<br />

14<br />

15<br />

16<br />

17<br />

Overall<br />

length<br />

(mm)<br />

110<br />

160<br />

160<br />

160<br />

210<br />

160<br />

160<br />

160<br />

210<br />

260<br />

110<br />

160<br />

210<br />

210<br />

160<br />

210<br />

260<br />

310<br />

160<br />

160<br />

210<br />

260<br />

350<br />

160<br />

350<br />

160<br />

160<br />

210<br />

260<br />

160<br />

160<br />

210<br />

260<br />

310<br />

350<br />

210<br />

Working<br />

length<br />

(mm)<br />

42<br />

92<br />

92<br />

92<br />

142<br />

92<br />

110<br />

92<br />

142<br />

192<br />

42<br />

92<br />

142<br />

142<br />

92<br />

142<br />

192<br />

242<br />

92<br />

92<br />

142<br />

192<br />

290<br />

92<br />

282<br />

92<br />

92<br />

142<br />

192<br />

92<br />

92<br />

142<br />

192<br />

242<br />

290<br />

142<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

Part<br />

No.<br />

D-00016<br />

D-00038<br />

D-16106<br />

D-00066<br />

D-00072<br />

D-00094<br />

D-00119<br />

D-00131<br />

D-00147<br />

D-00153<br />

D-08040<br />

D-08056<br />

D-00169<br />

D-03274<br />

D-00175<br />

D-00181<br />

D-00197<br />

D-00206<br />

D-00212<br />

D-00228<br />

D-00234<br />

D-00240<br />

D-16112<br />

D-03280<br />

D-03296<br />

D-00256<br />

D-00262<br />

D-21331<br />

D-00278<br />

D-00284<br />

D-03981<br />

D-00290<br />

D-16156<br />

D-00309<br />

D-16162<br />

D-00315<br />

Part<br />

No.<br />

D-25111<br />

D-25127<br />

D-25133<br />

D-25149<br />

D-25155<br />

D-25161<br />

D-25177<br />

SDS stands for “Steck, Dreh, Sitz” (a German word meaning - Insert, Twist, Stay)


16<br />

Drilling (Masonry)<br />

Bit<br />

diameter<br />

(mm)<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

Part No.<br />

Cold chisel for SDS-PLUS hammers<br />

(For chipping, edging, channeling and breaking away larger chunks of concrete)<br />

160<br />

92<br />

D-16209<br />

18<br />

210<br />

142<br />

D-00321<br />

19<br />

300<br />

210<br />

350<br />

210<br />

232 D-00337<br />

150 D-00343<br />

290 D-16243<br />

142 D-00359<br />

Bit width<br />

(mm)<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

20 250 182<br />

Part No.<br />

D-08729<br />

20<br />

260<br />

310<br />

192 D-16259<br />

242 D-00365<br />

Scaling chisel for SDS-PLUS hammers<br />

(A wide chisel for chipping away scale of dried concrete spatter)<br />

22<br />

260<br />

192 D-00371<br />

24<br />

260<br />

200 D-25644<br />

Plastic pouch<br />

packaging<br />

25<br />

26<br />

28<br />

30<br />

260<br />

350<br />

260<br />

460<br />

460<br />

192 D-00387<br />

282 D-03311<br />

192 D-00393<br />

400 D-16318<br />

400 D-17572<br />

Bit width<br />

(mm)<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

50 215 182<br />

Part No.<br />

D-25616<br />

T.C.T drill bit for SDS-PLUS hammers / 4 cutters<br />

T.C.T drill bit 5 pcs. set for SDS-PLUS hammers<br />

(5 different sizes)<br />

Bit<br />

diameter<br />

(mm)<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

Part No.<br />

5<br />

6<br />

160<br />

210<br />

260<br />

160<br />

210<br />

100<br />

150<br />

200<br />

100<br />

150<br />

B-68133<br />

B-68149<br />

B-68155<br />

B-62505<br />

B-62511<br />

Bit dia.<br />

(mm)<br />

6, 8<br />

6, 8, 10<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

110 50<br />

160 100<br />

Part No.<br />

D-61678<br />

8<br />

160<br />

210<br />

100<br />

150<br />

B-62614<br />

B-62620<br />

T.C.T drill bit & chisel set for SDS-PLUS hammers<br />

260<br />

200<br />

B-62636<br />

160<br />

100<br />

B-62670<br />

10<br />

210<br />

260<br />

150<br />

200<br />

B-62686<br />

B-62692<br />

310<br />

250<br />

B-62701<br />

160<br />

100<br />

B-62739<br />

Plastic pouch<br />

packaging<br />

12<br />

16<br />

18<br />

20<br />

22<br />

210<br />

260<br />

210<br />

260<br />

310<br />

260<br />

260<br />

160<br />

150<br />

200<br />

150<br />

200<br />

250<br />

100<br />

150<br />

100<br />

B-62745<br />

B-62751<br />

B-62860<br />

B-62876<br />

B-62882<br />

B-68177<br />

B-68183<br />

B-68199<br />

Overall<br />

length<br />

Working<br />

length<br />

Bit dia.<br />

(mm)<br />

(mm) (mm)<br />

5.5, 6.0, 6.5, 8.0, 10.0 160 92<br />

10.0, 12.0, 16.0 210 142<br />

Bull Point 250mm<br />

Cold Chisel 20x250mm<br />

Part No.<br />

D-70904<br />

Bull point for SDS-PLUS hammers<br />

(For demolishing concrete)<br />

Bit dia.<br />

(mm)<br />

14<br />

14<br />

Overall<br />

length<br />

(mm)<br />

250<br />

400<br />

Working<br />

length<br />

(mm)<br />

170<br />

332<br />

Part No.<br />

D-08713<br />

D-19015<br />

10pcs. assortment<br />

Bit dia.<br />

(mm)<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

5, 5.5, 6, 6.5, 8, 10, 12, 16 160 100<br />

Bull point 160<br />

Cold chisel 20 × 140<br />

Part No.<br />

D-46361


Drilling (Masonry) 17<br />

T.C.T drill bit & chisel set for SDS-PLUS hammers/<br />

Aluminum case in <strong>Makita</strong> blue<br />

T.C.T drill bit for SDS-MAX hammers / 4 Cutter<br />

Range : Three-Star ★★★<br />

10pcs. assortment<br />

Bit dia.<br />

(mm)<br />

5.5, 6, 6.5, 8, 10<br />

10, 12, 16<br />

Overall<br />

length<br />

(mm)<br />

160<br />

210<br />

Bull point 250<br />

Cold chisel 20 × 250<br />

Working<br />

length<br />

(mm)<br />

100<br />

150<br />

SDS-PLUS Adapter with Chuck and Key set<br />

(Not to be use for “Rotation with Hammering”)<br />

Part No.<br />

D-70904<br />

Bit diameter<br />

(mm)<br />

12<br />

14<br />

16<br />

18<br />

Overall<br />

length (mm)<br />

340<br />

540<br />

340<br />

540<br />

340<br />

540<br />

340<br />

540<br />

Working<br />

length (mm)<br />

200<br />

400<br />

200<br />

400<br />

200<br />

400<br />

200<br />

400<br />

Part No.<br />

E-11324<br />

E-11330<br />

E-11346<br />

E-11352<br />

E-11368<br />

E-11374<br />

E-11380<br />

E-11396<br />

Chuck<br />

capacity<br />

Part<br />

No.<br />

10 mm (3/8") 194041-7<br />

SDS-MAX<br />

T.C.T drill bit for SDS-MAX hammers / 2 Cutter<br />

20<br />

22<br />

24<br />

28<br />

340<br />

540<br />

340<br />

540<br />

340<br />

540<br />

370<br />

540<br />

200<br />

400<br />

200<br />

400<br />

200<br />

400<br />

250<br />

400<br />

E-11405<br />

E-11411<br />

E-11427<br />

E-11433<br />

E-11449<br />

E-11455<br />

E-11483<br />

E-11499<br />

Bit<br />

diameter<br />

(mm)<br />

Overall<br />

length<br />

(mm)<br />

Working<br />

length<br />

(mm)<br />

Part No.<br />

12<br />

340<br />

540<br />

200<br />

472<br />

D-33875<br />

D-33881<br />

T.C.T drill bit for SDS-MAX hammers / 4 Cutter<br />

14<br />

340<br />

540<br />

272<br />

472<br />

D-33897<br />

D-33906<br />

15<br />

340<br />

540<br />

272<br />

472<br />

D-33912<br />

D-33928<br />

16<br />

340<br />

540<br />

272<br />

472<br />

D-33934<br />

D-33940<br />

18<br />

340<br />

540<br />

272<br />

472<br />

D-33956<br />

D-33962<br />

20<br />

22<br />

340<br />

540<br />

340<br />

540<br />

272<br />

472<br />

272<br />

472<br />

D-33978<br />

D-33984<br />

D-33990<br />

D-34001<br />

Bit diameter<br />

(mm)<br />

16<br />

Overall<br />

length (mm)<br />

520<br />

Working<br />

length (mm)<br />

380<br />

Part No.<br />

A-19292<br />

24<br />

340<br />

540<br />

272<br />

472<br />

D-34017<br />

D-34023<br />

18<br />

19<br />

540<br />

540<br />

400<br />

400<br />

A-19417<br />

A-19423<br />

25<br />

340<br />

540<br />

272<br />

472<br />

D-34039<br />

D-34045<br />

24<br />

520<br />

540<br />

380<br />

400<br />

P-17251<br />

A-19467<br />

28<br />

30<br />

32<br />

35<br />

38<br />

370<br />

570<br />

370<br />

570<br />

370<br />

570<br />

370<br />

570<br />

370<br />

570<br />

302<br />

502<br />

302<br />

502<br />

302<br />

502<br />

302<br />

502<br />

302<br />

502<br />

D-34051<br />

D-34067<br />

D-34073<br />

D-34089<br />

D-34095<br />

D-34104<br />

D-34110<br />

D-34126<br />

D-34132<br />

D-34148<br />

25<br />

28<br />

30<br />

32<br />

35<br />

38<br />

320<br />

520<br />

370<br />

570<br />

370<br />

540<br />

540<br />

570<br />

370<br />

540<br />

180<br />

380<br />

230<br />

430<br />

230<br />

400<br />

400<br />

430<br />

230<br />

400<br />

A-17550<br />

A-19473<br />

A-17566<br />

P-17332<br />

A-17572<br />

A-19510<br />

A-19526<br />

P-17382<br />

A-17594<br />

A-19532<br />

40<br />

370<br />

570<br />

302<br />

502<br />

D-34154<br />

D-34160


18<br />

Drilling (Masonry)<br />

T.C.T drill bit for SDS-MAX hammers/ Mining<br />

*Suitable for drilling into hard rock.<br />

*Resharpenable.<br />

Bushing tool for SDS-MAX hammers<br />

(For concrete surface removal)<br />

• Use with shank (A-19897)<br />

Size (mm)<br />

67 × 67<br />

Part No.<br />

A-19881<br />

Bit diameter<br />

(mm)<br />

Bull point for SDS-MAX hammers<br />

(For demolishing concrete)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

32 570<br />

450<br />

32 920<br />

800<br />

Part No.<br />

B-14613<br />

B-15045<br />

Rammer for SDS-MAX hammers<br />

(For tamping)<br />

• Use with shank (A-19897)<br />

Diameter (mm)<br />

Part No.<br />

Bit diameter<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

Part No.<br />

140<br />

A-19875<br />

18 400<br />

332<br />

18 600<br />

532<br />

D-34182<br />

D-34198<br />

Tools for Hex Shank Hammers<br />

Bull point for SDS-MAX hammers/ Self-sharpening<br />

(For demolishing concrete)<br />

T.C.T drill bit for 17mm Hex shank hammers<br />

Bit diameter<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

Part No.<br />

18 400<br />

332<br />

B-10621<br />

Bit diameter<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

Part No.<br />

Cold chisel for SDS-MAX hammers<br />

(For chipping, edging, channeling and breaking away larger chunks of concrete)<br />

Tip width<br />

(mm)<br />

Scaling chisel for SDS-MAX hammers<br />

(A wide chisel for chipping away scale of dried concrete spatter)<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

50 400<br />

332<br />

Clay spade for SDS-MAX hammers<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

25 280<br />

212<br />

25 400<br />

332<br />

Working<br />

length (mm)<br />

150 400<br />

332<br />

Part No.<br />

A-80802<br />

D-34213<br />

Part No.<br />

A-80824<br />

Part No.<br />

A-17653<br />

16<br />

18<br />

280<br />

505<br />

280<br />

505<br />

280<br />

155<br />

380<br />

155<br />

365<br />

155<br />

D-20127<br />

D-20133<br />

D-20149<br />

D-20155<br />

791011-3<br />

19<br />

280<br />

505<br />

155<br />

380<br />

D-20161<br />

D-20177<br />

20<br />

280<br />

155 D-20183<br />

505<br />

380 D-20199<br />

22<br />

280<br />

155 D-20208<br />

505<br />

380 D-20214<br />

25.5<br />

28<br />

32<br />

35<br />

280<br />

505<br />

505<br />

280<br />

505<br />

280<br />

505<br />

280<br />

155<br />

380<br />

380<br />

155<br />

380<br />

155<br />

380<br />

155<br />

D-<strong>2022</strong>0<br />

791022-8<br />

D-20236<br />

791030-9<br />

D-20258<br />

791014-7<br />

D-20270<br />

791031-7<br />

505<br />

380 A-21749<br />

38<br />

280<br />

155 791034-1<br />

505<br />

380 791035-9<br />

Bull point for 17mm Hex shank hammers<br />

(For demolishing concrete)<br />

Shank adapter for SDS-MAX hammers<br />

Bit diameter<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

Part No.<br />

Length mm<br />

Part No.<br />

17 280<br />

212<br />

D-08676<br />

250<br />

A-19897<br />

17 450<br />

382<br />

D-16863


Drilling (Masonry) 19<br />

Cold chisel for 17mm Hex shank hammers<br />

(For chipping, edging, channeling and breaking away larger chunks of concrete)<br />

Tools for 21mm Hex shank hammers<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

19 450<br />

382<br />

Part No.<br />

D-16879<br />

Bull point for 21mm Hex shank hammers<br />

(For demolishing concrete)<br />

Scaling chisel for 17mm Hex shank hammers<br />

(A wide chisel for chipping away scale of dried concrete spatter)<br />

Bit diameter<br />

(mm)<br />

Overall<br />

length (mm)<br />

Part No.<br />

21<br />

320<br />

D-16499<br />

21<br />

450<br />

D-23824<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

Part No.<br />

21<br />

600<br />

D-30994<br />

50 280<br />

212<br />

D-20694<br />

Grooving chisel for 17mm Hex shank hammers<br />

(For grooving, channeling or removal of heavy scale,<br />

especially in narrow or recessed areas.)<br />

Cold chisel for 21mm Hex shank hammers<br />

(For chipping, edging, channeling and breaking away larger chunks of concrete)<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Part No.<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

26 280<br />

212<br />

Part No.<br />

A-48561<br />

26<br />

26<br />

21<br />

320<br />

450<br />

600<br />

D-17588<br />

A-80581 /<br />

798012-2<br />

798269-5<br />

Clay spade for SDS-MAX hammers<br />

Scaling chisel for 21mm Hex shank hammers<br />

(A wide chisel for chipping away scale of dried concrete spatter)<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

Part No.<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Part No.<br />

105 400<br />

332<br />

798032-6<br />

70<br />

320<br />

798016-4<br />

Bushing tool for 17mm Hex shank hammers<br />

(For concrete surface removal)<br />

Bushing tool for 21mm Hex shank hammers<br />

(For concrete surface removal)<br />

Size (mm)<br />

Part No.<br />

Size (mm)<br />

Part No.<br />

67 × 67<br />

798222-1<br />

67 × 67 798223-9<br />

Bushing tool for 17mm Hex shank hammers<br />

(For concrete surface removal)<br />

Rammer for 21mm Hex shank hammers<br />

(For tamping)<br />

Size (mm)<br />

67 × 67<br />

Part No.<br />

798390-0 /<br />

798225-5<br />

Diameter (mm) Part No.<br />

140 798224-7<br />

Rammer for 21mm Hex shank hammers<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Working<br />

length (mm)<br />

Part No.<br />

130 460<br />

392<br />

A-47391


20<br />

Drilling (Masonry)<br />

Tools for 28.6mm Hex Shank Hammers<br />

Cold chisel for 30mm Hex shank hammers<br />

(For chipping, edging, channeling and breaking away larger chunks of concrete)<br />

With Brim<br />

Without Brim<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Part No.<br />

30<br />

400<br />

D-15291<br />

Bull point for 28.6mm Hex shank hammers<br />

(For demolishing concrete)<br />

Scaling chisel for 30mm Hex shank hammers<br />

(A wide chisel for chipping away scale of dried concrete spatter)<br />

Bit diameter<br />

(mm)<br />

Overall<br />

length (mm)<br />

Part No.<br />

28.6<br />

520<br />

D-21353<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Part No.<br />

Cold chisel for 28.6mm Hex shank hammers<br />

(For chipping, edging, channeling and breaking away larger chunks of concrete)<br />

75<br />

310<br />

D-23868<br />

Clay spade for 30mm Hex shank hammers<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Part No.<br />

28.6<br />

410<br />

D-17647<br />

28.6<br />

520<br />

D-21369<br />

Width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Part No.<br />

Scaling chisel for 28.6mm Hex shank hammers<br />

(A wide chisel for chipping away scale of dried concrete spatter)<br />

120<br />

500<br />

B-10300<br />

Rammer for 30mm Hex shank hammers<br />

(For tamping)<br />

Tip width<br />

(mm)<br />

Overall<br />

length (mm)<br />

Part No.<br />

75<br />

410<br />

D-17681<br />

75<br />

520<br />

D-20725<br />

Diameter (mm)<br />

Part No.<br />

Tools for 30mm Hex shank hammers<br />

200<br />

A-31485<br />

Bull point for 30mm Hex shank hammers<br />

(For demolishing concrete)<br />

Bit diameter<br />

(mm)<br />

30<br />

Overall<br />

length (mm)<br />

400<br />

Part No.<br />

D-15285


21<br />

ACCESSORIES<br />

Fastening<br />

Hex (H)<br />

PZ<br />

Square (SQ)<br />

Slotted (SL)<br />

T<br />

Phillips (PH)<br />

TH<br />

With magnet<br />

Made of chrome-molybdenum<br />

alloy steel <br />

Made of chrome-molybdenum<br />

alloy steel <br />

For 3/8" square drive<br />

For 1/2" square drive


22<br />

Fastening<br />

Bit piece for screwdriver & impact driver<br />

Screw bit (E-form)<br />

MZ type<br />

NZ type<br />

C-form<br />

Screw bit (E-form)<br />

E-form<br />

A<br />

B<br />

L<br />

Part No.<br />

1/4" Hex (NZ)<br />

Drive<br />

type<br />

Size (mm)<br />

A B L<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

322279-6<br />

0.8 6.0 70 3 798298-8<br />

Drive type<br />

Philips<br />

(PH)<br />

Pozidriv<br />

(PZ)<br />

Hex<br />

(H)<br />

Torx<br />

(T)<br />

Torx internal<br />

tamper proof<br />

(TH)<br />

Square<br />

(SQ)<br />

Slotted<br />

(SL)<br />

1.0 3.5 45 3 798299-6<br />

1.2 8.0 45 3 798300-7<br />

1.2 8.0 70 3 798302-3<br />

Screw bit (E-form) for screwdriver / 5pcs. set<br />

Torx (T)<br />

1/4" Hex (NZ)<br />

Drive<br />

type<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Model<br />

No.<br />

Part<br />

No.<br />

PH 2 162 5 DFR550 B-10481<br />

Pozidriv bits have<br />

ribs between each<br />

part of the cross<br />

Double-end -<br />

Screw bit (Double-end)<br />

With magnet<br />

Four tick marks<br />

around the cross<br />

indicate Pozidriv<br />

1/4" Hex (NZ)<br />

Drive<br />

type<br />

Length<br />

(mm)<br />

10 pieces/Pack<br />

PN: D-31740<br />

Per<br />

pkg.<br />

100 pieces/Jar<br />

PN: D-31653<br />

Part<br />

No.<br />

TORX PLUS Tamper-Resistant (TH)<br />

PH 1<br />

PH 2<br />

65<br />

65<br />

3<br />

1<br />

798307-3<br />

784203-1<br />

PH 2<br />

65<br />

10<br />

D-31740<br />

PH 2<br />

65<br />

100<br />

D-31653<br />

PH 2<br />

110<br />

3<br />

798337-4<br />

PH 3<br />

45<br />

3<br />

784208-1<br />

PH 3<br />

110<br />

3<br />

798339-0<br />

1. Screw bit (C-form)<br />

Screw bit (C-form) 3pcs. set / Blister pack<br />

Screw bit (Double-end) 10pcs. set / Plastic bag<br />

For drills<br />

With magnet<br />

Straight<br />

Size<br />

PH 1<br />

PH 2<br />

PH 3<br />

Length<br />

(mm)<br />

25<br />

25<br />

25<br />

Shank<br />

Type<br />

C-form<br />

C-form<br />

C-form<br />

Per<br />

pkg.<br />

3<br />

3<br />

3<br />

Part No.<br />

798313-8<br />

798312-0<br />

798314-6<br />

Drive<br />

type<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

PH 2 - SL 5 65 10 D-65545


Fastening 23<br />

Ultra mag attacher & Neck torsion bit (Double-end) /<br />

Blister pack<br />

With Ultra mag attacher on the bits, extra strong magnet holds even long screws<br />

securely for accurate driving.<br />

securely for accurate driving.<br />

"VISION" Finder/Driver (Magnetic)<br />

Retracting Screw Holder<br />

Holds and drives screws without wobble or disengaging from the bit<br />

With magnet<br />

Includes 1 ea. "Original" “VISION” Finder/Driver, #1 Phillips Insert Bit, #2 Phillips Insert Bit<br />

and 6-8 Slotted Insert Bit<br />

With magnet<br />

Size<br />

(A)<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

Absorbs the small vibration which occurred from the start of screwing<br />

1/4" 120 1 784814-A<br />

Flexible bit holder<br />

Flexible extension for driving into hard to access corners.<br />

1/4" Hex (NZ)<br />

Drive<br />

type<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

With magnet<br />

PH 2 65 1 B-30483<br />

Twist torsion screw bit (Double-end) / Blister pack<br />

Size<br />

(A)<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

1/4" 200 1 A-86963<br />

With magnet<br />

Nutsetter<br />

* Japanese Package<br />

1/4''Hex (NZ)<br />

Drive<br />

type<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

Magnet nutsetter (E-from) / Blister pack<br />

A<br />

With magnet<br />

4. Bit holder<br />

Non-magnetic bit holder<br />

1/4''Hex (MZ)<br />

Size<br />

(A)<br />

PH 2 65 3 A-67505<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

1/4" 76 1 784604-3<br />

Magnetic bit holder for screwdriver<br />

For model FS4000, 6823, 6802B, DFS451, FS2700.<br />

A<br />

1/4''Hex (NZ)<br />

Size<br />

(A)<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

5/16" 50 1 B-38772<br />

Magnet nutsetter (E-form) / Candy jar<br />

With magnet<br />

A<br />

1/4''Hex (NZ)<br />

Size<br />

(A)<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

8 50 50 B-68345<br />

With magnet<br />

1/4''Hex (MZ)<br />

Magnet nutsetter (E-from)<br />

A<br />

Size<br />

(A)<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

With magnet<br />

1/4" 76 1 784801-1<br />

1/4''Hex (MZ)<br />

Size<br />

(A)<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

1/4" 65 1 784803-7<br />

3/8" 65 1 784802-9<br />

5/16" 50 1 784404-1<br />

8.0 mm 55 1 784403-3<br />

10 mm 55 1 784405-9


24<br />

Fastening<br />

Ring nutsetter / Blister pack<br />

The spring-loaded clip retains the fastener, eliminating all build up of swarf on the<br />

magnet which prevents correct fastener connection.<br />

A<br />

21pcs. Screw bit & Socket set with Rachet handle /<br />

Clamshell<br />

1/4''Hex (NZ)<br />

Size<br />

(A)<br />

Length<br />

(mm)<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

Ph1, PH2, PH3 x 25mm, PZ1, PZ2 x 25mm, SL0.8x5.5,SL1.2x6.5 x 25mm,<br />

T20,T25,T30 x 25mm, H4, H6 x 25mm, Socket: H5,H6,H8,H10,H12,H13<br />

Magnetic bit holder MZ, Rachet handle 1/4"<br />

Part No.<br />

8mm (5/16") 50 1 B-30455<br />

B-54081<br />

31pcs. Screw bit set / Clamshell<br />

PH0, PH1,4xPH2,,PH3 x 25mm, PZ0, PZ1, 4xPZ2, PZ3 x 25mm<br />

SL4.5,SL5.5, SL6.5 x 25mm , T10,T15, 2xT20, 2xT25, T27 ,T30, T40 x 25mm,<br />

H3,H4,H5,H6 x 25mm, Sleeve chuck bit holder<br />

Socket adapter / Socket bit<br />

Socket adapter / Blister pack<br />

It allows impact driver to fasten or loosen bolt and nut.<br />

1/4''Hex (NZ)<br />

Bit Type<br />

1/2" Drive<br />

3/8" Drive<br />

Part No.<br />

B-54695<br />

B-54689<br />

1/4''Hex (NZ)<br />

Part No.<br />

B-69901<br />

Battery type case / Shrink rap<br />

9pcs.Socket adapter assortment / Blister pack<br />

Part No.<br />

It allows impact driver to fasten or loosen bolt and nut.<br />

8,10,12,13,14,15,17,18mm<br />

Socket adapter 50mm<br />

B-69917<br />

18pcs. Screw bit set<br />

PH1, 2xPH2, PH3 x 25mm, PH1, PH2, PH3 x 50mm<br />

PZ1, 2xPZ2, PZ3 x 25mm, PZ1, PZ2, PZ3 x 50mm<br />

SL4, SL5, SL6 x 50mm<br />

Sleeve chuck bit holder MZ<br />

Part No.<br />

SQ 1/2''<br />

Part No.<br />

B-55762<br />

Tilt socket adapter / Blister pack<br />

The socket can tilt up to 15°angle<br />

to assist fastening in con ned applications.<br />

1/4''Hex (MZ)<br />

B-28896<br />

Part No.<br />

B-28553


Fastening 25<br />

14pcs. Impact socket (Deep type) set / Paper sleeve<br />

Earth auger drill bit set<br />

(Comes with socket, pin and O rings) / Pouch<br />

Shank type<br />

1/2" Drive<br />

Included holesaws (1 each)<br />

10, 11, 12, 13, 14, 16<br />

17, 19, 21, 22, 24, 27, 30, 32mm<br />

Part No.<br />

B-52308<br />

Bit dia (mm)<br />

20<br />

25<br />

Length (mm)<br />

600<br />

600<br />

Working<br />

Length (mm)<br />

530<br />

530<br />

Part No.<br />

B-54302<br />

B-54318<br />

Socket extension / Hanger hook<br />

30<br />

35<br />

600<br />

600<br />

530<br />

530<br />

B-54324<br />

B-54330<br />

40<br />

600<br />

530<br />

B-57576<br />

1/2''anvil<br />

Size Length (mm) Anvil Part No.<br />

SQ 1/2"<br />

SQ 1/2"<br />

150<br />

250<br />

SQ 1/2"<br />

SQ 1/2"<br />

B-55712<br />

B-55706<br />

Earth auger drill bit / Paper box<br />

It can drill into ground.<br />

It is suitable for building greenhouse<br />

Bit adapter / Clamshell<br />

For impact wrench<br />

1/4''Hex (NZ)<br />

1/4" HEX. Shank<br />

O-ring and Pin<br />

1/2" Square Drive<br />

Bit dia (mm)<br />

100<br />

150<br />

200<br />

Length (mm)<br />

800<br />

800<br />

800<br />

Working<br />

Length (mm)<br />

--<br />

--<br />

--<br />

Part No.<br />

E-07294<br />

E-07303<br />

E-07319<br />

Drive size Bit size Part No.<br />

SQ 1/2" 1/4" Hex (NZ) B-68476<br />

Extension Bar<br />

For Earth auger drill bit<br />

Earth auger drill bit / Pouch<br />

It can drill into ground.<br />

It is suitable for building greenhouse<br />

Length (mm)<br />

Part No.<br />

540 E-07325<br />

Pin<br />

For Earth auger drill bit<br />

Part No.<br />

E-07331<br />

Bit dia (mm)<br />

20<br />

25<br />

30<br />

35<br />

40<br />

Length (mm)<br />

600<br />

600<br />

600<br />

600<br />

600<br />

Working<br />

Length (mm)<br />

530<br />

530<br />

530<br />

530<br />

530<br />

Part No.<br />

B-54346<br />

B-54352<br />

B-54368<br />

B-54374<br />

B-57582


26<br />

ACCESSORIES<br />

Drill and Screw Bit Sets


Drill and Screw Bit Set<br />

17pcs. Combination set<br />

HSS-R drill bit x4pcs. Masonry drill bit x4pcs.<br />

Screw bit 25mm x12pcs. Magnetic bit holder<br />

HSS-R Drill Bit (4pcs.)<br />

3, 4, 5, 6mm<br />

Masonry Drill Bit (4pcs.)<br />

4, 5, 6, 8mm<br />

Screw Bit 25mm (8pcs.)<br />

Ph2, Ph3<br />

Pz2, Pz3<br />

T20, T25,<br />

SI0.8, SI1.2<br />

Magne c Bit Holder (1pc.)<br />

Part No.<br />

D-53693<br />

75pcs. Drill & Screw bit set<br />

metric size Type MZ<br />

HSS-TiN drill Bit x19pcs. Masonry drill bit x5pcs. Wood drill bit x4pcs. Screw bit25mm x20pcs.<br />

Screw bit 50mm x16pcs. Nutsetter x8pcs, Countersink bit, Center punch, Magnetic bit holder<br />

21pcs. Drill bit assortment set<br />

M-force HSS metal drill bit (for metal)<br />

Masonry drill bit (for masonry)<br />

Wood drill bit (for wood)<br />

Part No.<br />

B-44884<br />

48 pcs. HSS-G Screw & Socket Set<br />

Item Contents<br />

1/4" Hex Sleeve chuck Bit holder -<br />

Magnetic, 2 way rotation<br />

• 2xPH1, 2xPH2, 1xPH3<br />

• 2xPZ1, 2xPZ2, 1xPZ3<br />

• 1xT10, 2xT15, 2xT20, 2xT25,<br />

2xT30, 1xT40<br />

• 1xSL4.5, 2xSL5.5, 2xSL6.5<br />

• 1xH2, 1xH2.5, 1xH3, 1xH4,<br />

2xH5, 2xH6<br />

• Sockets:4, 5, 6, 8, 10mm<br />

• HSS-G (Metal Drill Bit): 1.5, 2, 2.5,<br />

3, 3.5, 4, 4.5, 5, 6mm<br />

27<br />

Part No.<br />

B-36192<br />

Part No.<br />

B-49373<br />

18pcs. Metal drill box set<br />

HSS-G Metal drill 3,4,5,6,8,10mm<br />

Wood 3,4,5,6,8,10mm<br />

Masonry drill for brick3,4,5,6,8,10mm<br />

Part No.<br />

D-46202


28<br />

Drill and Screw Bit Set<br />

Clear case Series<br />

Clear case Series<br />

29 pieces<br />

Clear cover makes it visible inside.<br />

Comparing to current items, clear case was<br />

designed to be able to stacked stabely.<br />

Clear case Series<br />

27 pieces<br />

Part No.<br />

E-07113<br />

Clear case Series<br />

32 pieces<br />

Part No.<br />

E-07098<br />

Clear case Series<br />

28 pieces<br />

Part No.<br />

E-07135<br />

Part No.<br />

E-07107


29<br />

ACCESSORIES<br />

Cutting<br />

Dia / Bore<br />

No. Teeth<br />

Kerf<br />

Thickness<br />

Rake<br />

Ring<br />

Rip cut<br />

Cross cut<br />

Tip embedded<br />

Silent<br />

M-Force<br />

Fast cut<br />

Clean cut<br />

Extra clean cut<br />

Coated<br />

Heavy duty<br />

Long life<br />

PCD tip<br />

Sharp


30<br />

Cutting<br />

Carbide-tipped saw blade<br />

Tooth shape<br />

ATB ATAF ATAFR<br />

M-FORCE FTG TCG<br />

Alternate top bevel<br />

For wood and aluminum.<br />

ATBR: Added at teeth to<br />

ATB for easy straight<br />

cutting<br />

Alternate top alternate<br />

face<br />

Enables to cut wood<br />

ber sharply.<br />

Added at teeth to ATAF<br />

for easy straight cutting.<br />

MATAFR: Modied ATAFR<br />

for less cutting resistance.<br />

Tooth front and top<br />

shapes symmetric V<br />

groove having features<br />

of ATB and FTG.<br />

Flat teeth, allows easy<br />

straight cutting and tips<br />

are rarely chipped. For<br />

cutting wood along the<br />

grain and cutting thin<br />

metal.<br />

Trapezoidal and at teeth<br />

are arranged alternatively<br />

and they divide debris by<br />

three. Allows easy straight<br />

cutting and tips are rarely<br />

chipped.<br />

MTCG<br />

SMTCG<br />

Hi-ATB<br />

Flat teeth with alternating<br />

bevel Less cutting<br />

resistance than at teeth.<br />

Tips are rarely chipped<br />

Contrast to MTCG,<br />

asymmetric two bevels on a<br />

tooth top producing sharp<br />

edges Allows easy bite to<br />

materials.<br />

Alternate top bevel (ATB)<br />

with a larger top bevel<br />

angle<br />

Special tooth design increased work amount per 1 battery<br />

charge<br />

Technical term<br />

Laser Slit Coated Tip Embedded P.C.D Tip<br />

Vibration dampening system<br />

Resinbond lled laser cut body<br />

slots for smoother and quieter<br />

cuts.<br />

PTFE (polytetra uoroethylene)<br />

coating plate to reduce pitch<br />

build-up and to lower resistance.<br />

Inserted tooth design will greatly<br />

increases the body-to-tip braze<br />

area for greater support and tip<br />

strength.<br />

PCD (Poly-Crystalline Diamond)<br />

tips has extreme hardness and<br />

wear resistance. PCD tipped saw<br />

blade is the best choice for long<br />

lasting performance when<br />

cutting ber cement board.<br />

Rake


Cutting 31<br />

This movie was lmed in Japan.<br />

Models and specs may vary by country.<br />

Feature of EFFICUTs<br />

EFFICIENT<br />

Sharp top angle<br />

Enable you to make a<br />

ne cut surface with<br />

only little effort.<br />

More cuts per charge<br />

EFFICIENT<br />

Curved body<br />

EFFICIENT<br />

Slimmed bottom<br />

Allows the excellent<br />

chip chute perfomance.<br />

Realizes long life battery<br />

by saving cutting<br />

resistance.<br />

Fast cutting<br />

165mm x 48T<br />

EFFICUT 165mm x 50T<br />

Plate: 1.6mm The amount of cutting per 1 charge<br />

Plate: 1.0mm<br />

100<br />

240<br />

0 100 200<br />

× 2.4<br />

more<br />

Longer life<br />

1. The test results depend to a great extent on the hardness of<br />

wood materials, etc.<br />

2. The cutting amount bar graphs are relative values when the<br />

capacity of current blade (Thickness : 1.6 mm) is indexed at 100.


32<br />

Cutting<br />

This movie was lmed in Japan.<br />

Models and specs may vary by country.<br />

Feature of EFFICUTs<br />

EFFICIENT<br />

Strong and least chipping<br />

More cuts per charge<br />

EFFICIENT<br />

Release swarf smoothly<br />

Fast cutting<br />

EFFICIENT<br />

Release swarf smoothly<br />

Longer life<br />

Plate: 1.2mm The amount of cutting per 1 charge<br />

100<br />

150mm x 32T<br />

Plate: 0.95mm<br />

EFFICUT 150mm x 33T<br />

160<br />

0 100 200<br />

x1.6<br />

more<br />

Model: DCS553 ( BL1860B )<br />

Material: Carbon steel pipe ( Dia: 31mm / Thickness: 3mm )


Cutting 33<br />

Specialized Circular Saw Blade<br />

for Metal<br />

Ideal for Cordless Metal Cutting Saw<br />

Outer dia.<br />

inches mm<br />

5-3/8" 136<br />

5-29/32" 150<br />

No. of<br />

teeth<br />

Bore<br />

(mm)<br />

Ring<br />

(mm)<br />

Kerf<br />

(mm)<br />

Rake<br />

Tooth<br />

shape<br />

Material / Compatibility<br />

45T 20 - 1.10 0° EFFICUT METAL<br />

Metal & SUS / DCS550 B-69434<br />

Note<br />

Part No.<br />

33T 20 - 1.10 0° EFFICUT METAL<br />

Metal / DCS553 B-69440<br />

48T 20 - 1.10 0° EFFICUT METAL<br />

Metal & SUS / DCS553 B-69456<br />

for Wood<br />

Ideal for Cordless Circular Saw<br />

Outer dia.<br />

inches mm<br />

6-1/4"<br />

7-1/4"<br />

8-1/2"<br />

165<br />

185<br />

216<br />

No. of<br />

teeth<br />

25T<br />

56T<br />

24T<br />

45T<br />

80T<br />

45T<br />

Bore<br />

(mm)<br />

20<br />

20<br />

20<br />

20<br />

25.4<br />

25.4<br />

Ring<br />

(mm)<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

Kerf<br />

(mm)<br />

1.40<br />

1.40<br />

1.45<br />

1.45<br />

2.00<br />

2.15<br />

Rake<br />

23°<br />

23°<br />

23°<br />

23°<br />

10°<br />

10°<br />

Tooth<br />

shape<br />

ATAFR<br />

ATAFR<br />

ATAFR<br />

ATAFR<br />

ATAFR<br />

ATAFR<br />

Material / Compatibility Note Part No.<br />

Wood<br />

B-63018<br />

Wood / MDF / Laminate<br />

B-57364<br />

Wood<br />

B-6<strong>2022</strong><br />

Wood<br />

B-68616<br />

Wood<br />

E-08975<br />

Wood<br />

B-64668<br />

10"<br />

260<br />

60T<br />

25.4<br />

-<br />

2.15<br />

10°<br />

ATAFR<br />

Wood<br />

B-67430<br />

80T<br />

25.4<br />

-<br />

2.15<br />

10°<br />

ATAFR<br />

Wood<br />

B-67446<br />

12"<br />

305<br />

60T<br />

80T<br />

100T<br />

25.4<br />

25.4<br />

25.4<br />

-<br />

-<br />

-<br />

2.15<br />

2.15<br />

2.15<br />

10°<br />

10°<br />

10°<br />

ATAFR<br />

ATAFR<br />

ATAFR<br />

Wood<br />

Wood<br />

Wood<br />

B-67452<br />

B-67468<br />

B-67474<br />

PCD Saw Blade for Fiber Cement Board<br />

•Polycrystalline diamond edges have been added to the tungsten carbide tips of this range of<br />

saw blades to produce long lasting product<br />

•Suitable for cutting all densities and thickness of Fibre Cement Sheeting<br />

•Low / Medium / High Density - All thickness, depending on the capacity of the saw being used.<br />

HOW IS PCD MADE:<br />

Polycrystalline Diamond (PCD): They are normally made by sintering many micro-size<br />

single diamond crystals at high temperature and high pressure. ... High-temperature brazed<br />

diamond tools: This tool is made by brazing a single layer of diamonds onto the tool via<br />

a solder at a temperature of over 900 °C.<br />

Outer dia.<br />

inches mm<br />

7-1/4" 185<br />

No. of<br />

teeth<br />

4T<br />

Bore<br />

(mm)<br />

20<br />

Ring<br />

(mm)<br />

-<br />

Kerf<br />

(mm)<br />

1.80<br />

Rake<br />

12°<br />

Tooth<br />

shape<br />

--<br />

Material / Compatibility<br />

Fiber Cement Board<br />

Note<br />

PCD<br />

Part No.<br />

D-72110<br />

10-1/4"<br />

260<br />

6T<br />

25.4<br />

-<br />

2.20<br />

12°<br />

--<br />

Fiber Cement Board<br />

PCD<br />

D-72126


34<br />

Circular Saw Blade<br />

Outer dia.<br />

inches mm<br />

3-3/8"<br />

4-3/8"<br />

5-3/8"<br />

5-29/32"<br />

6-1/4"<br />

7-1/4"<br />

8"<br />

8-1/2"<br />

9"<br />

10"<br />

12"<br />

13"<br />

14"<br />

85<br />

110<br />

136<br />

150<br />

165<br />

185<br />

203<br />

216<br />

235<br />

255<br />

260<br />

305<br />

335<br />

355<br />

No. of<br />

teeth<br />

Bore<br />

(mm)<br />

Ring<br />

(mm)<br />

Kerf<br />

(mm)<br />

Rake<br />

Tooth<br />

shape<br />

Material / Compatibility Note Part No.<br />

20T 15 - 1.00 10° ATB Wood / CC300D B-14607<br />

24T 20 - 1.70 10° ATB Wood / 100mm (4") Grinder D-15578<br />

30T 20 - 1.50 0° MTCG Metal / DCS550 B-07319<br />

45T 20 - 1.10 0° EFFICUT METAL<br />

Metal & SUS / DCS550 B-69434<br />

33T 20 - 1.10 0° EFFICUT METAL<br />

Metal / DCS553 B-69440<br />

48T 20 - 1.10 0° EFFICUT METAL<br />

Metal & SUS / DCS553 B-69456<br />

24T<br />

25T<br />

40T<br />

56T<br />

60T<br />

60T<br />

24T<br />

24T<br />

40T<br />

45T<br />

60T<br />

60T<br />

28T<br />

38T<br />

48T<br />

64T<br />

70T<br />

24T<br />

40T<br />

60T<br />

80T<br />

80T<br />

20T<br />

40T<br />

60T<br />

80T<br />

40T<br />

60T<br />

80T<br />

45T<br />

60T<br />

80T<br />

100T<br />

120T<br />

100T<br />

120T<br />

30T<br />

40T<br />

60T<br />

60T<br />

80T<br />

100T<br />

80T<br />

100T<br />

100T<br />

60T<br />

78T<br />

76T<br />

100T<br />

60T<br />

40T<br />

60T<br />

80T<br />

100T<br />

120T<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

20<br />

30<br />

20<br />

20<br />

20<br />

20<br />

20<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

30.0<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

30.0<br />

25.4<br />

30.0<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.00<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

25.4<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

15.88<br />

20/16/15.88<br />

-<br />

-<br />

-<br />

-<br />

-<br />

20.0<br />

25.0<br />

25.0<br />

20.0<br />

20.0<br />

25.0<br />

25.0<br />

25.0<br />

25.0<br />

25.0<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

16 / 20 / 25 / 25.4<br />

-<br />

-<br />

25.0<br />

25.0<br />

25.0<br />

-<br />

-<br />

-<br />

16 / 20 / 25 / 25.4<br />

-<br />

16 / 20 / 25 / 25.4<br />

-<br />

-<br />

-<br />

-<br />

-<br />

25.0<br />

25.0<br />

25.0<br />

25.0<br />

25.0<br />

2.00<br />

1.40<br />

2.00<br />

1.45<br />

2.00<br />

1.80<br />

2.20<br />

1.45<br />

2.20<br />

1.45<br />

2.20<br />

2.20<br />

2.00<br />

2.00<br />

2.00<br />

1.60<br />

1.70<br />

2.00<br />

2.00<br />

2.00<br />

2.00<br />

2.00<br />

2.50<br />

2.50<br />

2.50<br />

2.40<br />

2.80<br />

2.60<br />

2.60<br />

2.15<br />

2.15<br />

2.15<br />

2.60<br />

2.60<br />

2.60<br />

3.00<br />

3.40<br />

3.00<br />

2.80<br />

2.15<br />

2.15<br />

2.15<br />

2.80<br />

3.20<br />

2.80<br />

2.40<br />

2.30<br />

1.95<br />

2.00<br />

3.00<br />

3.20<br />

3.00<br />

3.00<br />

2.80<br />

3.30<br />

20°<br />

23°<br />

12°<br />

23°<br />

5°<br />

5°<br />

15°<br />

23°<br />

14°<br />

23°<br />

-5°<br />

5°<br />

10°<br />

0°<br />

0°<br />

0°<br />

-10°<br />

25°<br />

20°<br />

15°<br />

15°<br />

10°<br />

14°<br />

12°<br />

12°<br />

15°<br />

25°<br />

12°<br />

15°<br />

10°<br />

10°<br />

10°<br />

12°<br />

-5°<br />

5°<br />

5°<br />

25°<br />

25°<br />

20°<br />

10°<br />

10°<br />

10°<br />

5°<br />

15°<br />

5°<br />

0°<br />

0°<br />

-6°<br />

-3°<br />

20°<br />

25°<br />

20°<br />

20°<br />

0°<br />

0°<br />

ATB<br />

ATAFR<br />

ATB<br />

ATAFR<br />

TCG<br />

TCG<br />

ATB<br />

ATAFR<br />

ATB<br />

ATAFR<br />

TCG<br />

TCG<br />

ATAF<br />

MTCG<br />

MTCG<br />

SMTCG<br />

FTG<br />

ATB<br />

ATAF<br />

ATAF<br />

ATAF<br />

ATBR<br />

ATB<br />

ATB<br />

ATB<br />

ATAF<br />

ATB<br />

ATB<br />

ATB<br />

ATAFR<br />

ATAFR<br />

ATAFR<br />

ATB<br />

TCG<br />

TCG<br />

TCG<br />

ATB<br />

ATB<br />

ATAF<br />

ATAFR<br />

ATAFR<br />

ATAFR<br />

TCG<br />

ATB<br />

TCG<br />

TCG<br />

MTCG<br />

SMTCG<br />

ATB<br />

ATB<br />

ATAF<br />

ATAF<br />

ATAF<br />

ATB<br />

Wood<br />

Wood<br />

Wood<br />

Wood / MDF / Laminate<br />

MDF<br />

Aluminum<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

MDF<br />

Wood / Plastic / MDF / Aluminum / Laminated MDF<br />

Fiber Cement Board / 5057KB<br />

Mild steel / 4131<br />

Thin mild steel / 4131<br />

Stainless / Mild steel / 4131<br />

Corrugated steel plate / 4131<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood / Plastic / MDF / Alum / Laminated MDF<br />

Aluminum<br />

Aluminum<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Wood / Plastic / MDF / Alum / PVC<br />

Wood<br />

Wood / Plastic / MDF / Alum / PVC<br />

Mild steel / LC1230<br />

Thin mild steel / LC1230<br />

Metal & Stainless steel / LC1230<br />

Thin stainless steel / LC1230<br />

Wood<br />

Wood<br />

Wood<br />

Wood<br />

Aluminum / LS1440<br />

Aluminum / LS1440<br />

Laser slit<br />

Laser slit<br />

General purpose<br />

D-03333<br />

B-63018<br />

D-50500<br />

B-57364<br />

B-56677<br />

B-56530<br />

D-51493<br />

B-6<strong>2022</strong><br />

D-51502<br />

B-68616<br />

D-61466<br />

D-63622<br />

A-86088<br />

A-85438<br />

A-83967<br />

B-31697<br />

A-86446<br />

B-17099<br />

B-17120<br />

B-17142<br />

B-17158<br />

E-08975<br />

D-50544<br />

D-50550<br />

D-50566<br />

B-17223<br />

B-17267<br />

D-65420<br />

D-65436<br />

B-64668<br />

B-67430<br />

B-67446<br />

D-65442<br />

D-62240<br />

D-59162<br />

D-61058<br />

A-82068<br />

B-17354<br />

B-17376<br />

B-67452<br />

B-67468<br />

B-67474<br />

D-63579<br />

D-34403<br />

D-63585<br />

D-71364<br />

A-87127<br />

A-87579<br />

B-23151<br />

B-12603<br />

B-17435<br />

B-17457<br />

B-17463<br />

B-17398<br />

B-17407


35<br />

ACCESSORIES<br />

Jigsaw / Recipro sawing<br />

Tungsten carbide tipped<br />

Diamond grit<br />

Grit size<br />

Straight cutting<br />

Curved cutting<br />

Fine cut<br />

Coarse cut<br />

Thick material<br />

Thin material<br />

Ground teeth Number of teeth per inch Do not use orbital mode<br />

Use coolant, cool


36<br />

Jigsaw / Recipro sawing<br />

Accessories<br />

Jig Saw blade<br />

Teeth Type<br />

Milled and side set teeth<br />

Ground and side set teeth<br />

Milled and wavy set teeth<br />

Ground and taper ground teeth<br />

Teeth manufacture<br />

Milled teeth<br />

• Low cost type of<br />

manufacturing<br />

Ground teeth<br />

• Costly type of manufacturing<br />

• For general cutting<br />

• Soft to hard materials<br />

• Long blade life<br />

• Very sharp!<br />

• Accurate, clean cut<br />

• Soft to medium hard<br />

materials<br />

Production method<br />

• Side set: each individual tooth is alternately<br />

bent to the left and to the right. Raker setting<br />

Example: right, left, straight, etc.<br />

Side set<br />

Wavy set<br />

Ground<br />

• Wavy set:<br />

row of teeth receives a wave shape<br />

• Ground:<br />

blade body tapers to the rear (conical)<br />

Jig Saw Blade material<br />

• HCS (High Carbon Steel)<br />

• HSS (High Speed Steel)<br />

for cutting softer materials such as wood or plastics.<br />

for cutting harder materials such as metals.<br />

• BiM (Bi-metal, HCS base and HSS teeth)<br />

for cutting soft materials to hard materials such as wood, metal, plastics.<br />

• TC (Tungsten Carbide)<br />

for cutting glass ber reinforced plastic, cement-bonded berboards or plasterboard.


Jigsaw / Recipro sawing 37<br />

<strong>Makita</strong> type Jig Saw blade<br />

For Model:<br />

4300BA/BV, 4326M, 4327M<br />

Shape<br />

No.<br />

Wood<br />

Plywood (mm)<br />

Plastic (mm)<br />

Aluminum (mm)<br />

Stainless Steel<br />

(mm)<br />

Mild Steel<br />

(mm)<br />

Features / Application<br />

Working<br />

Length (mm)<br />

Tooth Per Inch<br />

Material<br />

Type of<br />

cutting<br />

Per<br />

pkg.<br />

Part No.<br />

Wood/ Basic<br />

3<br />

3-50<br />

3-50<br />

-<br />

-<br />

-<br />

For general cutting<br />

60<br />

9<br />

HCS<br />

5<br />

A-85868<br />

100 B-07808<br />

3<br />

3-50<br />

3-50<br />

-<br />

-<br />

-<br />

For scroll cutting<br />

60<br />

9<br />

HCS<br />

5<br />

A-85830<br />

Wood/ Fast<br />

8<br />

4-50<br />

4-50<br />

-<br />

-<br />

-<br />

For fast cutting<br />

60<br />

8<br />

HCS<br />

5<br />

A-85911<br />

Wood/ Finish<br />

9<br />

4-50<br />

4-50<br />

-<br />

-<br />

-<br />

For fast nish work<br />

60<br />

8<br />

HCS<br />

5<br />

792327-9<br />

A-85927<br />

10<br />

4-50<br />

4-50<br />

-<br />

-<br />

-<br />

For fast nish work,<br />

especially suitable for<br />

plywood<br />

60<br />

9<br />

HCS<br />

5<br />

100<br />

A-85818<br />

B-07820<br />

BR-3<br />

4-50<br />

-<br />

-<br />

-<br />

-<br />

Splinter-free cuts in wood<br />

requiring no sanding<br />

60<br />

9<br />

HCS<br />

5<br />

A-85933<br />

Hardwood / Decorative veneers<br />

2<br />

4<br />

3-50<br />

3-50<br />

3-50<br />

3-50<br />

2-6<br />

3-6<br />

-<br />

-<br />

2-6<br />

3-6<br />

For decorative veneers.<br />

For hardwood, thick mild<br />

steel plate and tough<br />

plastics<br />

60<br />

60<br />

8<br />

9<br />

HSS<br />

HSS<br />

2<br />

5<br />

100<br />

5<br />

10<br />

A-86527<br />

A-85852<br />

B-07799<br />

A-85874<br />

792142-1<br />

17<br />

2-50<br />

2-50<br />

2-6<br />

-<br />

2-6<br />

- Ideal for scroll cutting of<br />

decorative veneer<br />

60<br />

9<br />

HSS<br />

5<br />

A-85846<br />

Finish for decorative veneers<br />

41<br />

3-50<br />

3-50<br />

-<br />

-<br />

-<br />

Reverse tooth for splinterfree<br />

cuts. For tough plastic<br />

and decorative veneers<br />

60<br />

12<br />

HSS<br />

5<br />

A-85880<br />

42<br />

2-50<br />

2-50<br />

-<br />

-<br />

-<br />

For decorative veneer<br />

60<br />

16<br />

HSS<br />

5<br />

A-85896<br />

Metal / Basic<br />

1<br />

-<br />

1-6<br />

1-3<br />

0.5-3<br />

1-3<br />

For mild steel. Also<br />

suitable for corrugated<br />

plastics and tough plastics<br />

63<br />

24<br />

HSS<br />

2<br />

5<br />

100<br />

A-86511<br />

A-85802<br />

B-07783<br />

5<br />

-<br />

2-50<br />

-<br />

-<br />

-<br />

For mild steel<br />

42<br />

24<br />

HSS<br />

5<br />

A-85905<br />

6<br />

3-55<br />

3-55<br />

-<br />

-<br />

-<br />

Ideal for<br />

scroll cutting<br />

60<br />

9<br />

HSS<br />

10<br />

792152-8


38<br />

Jigsaw / Recipro sawing<br />

Bayonet type Jig Saw blade<br />

For Model:<br />

DJV181, DJV182, DJV180, JV183D, JV143D, JV0600, JV100D, J V101D, JV102D, J V103D, JV141D, J V142D<br />

DJR185, JR102D, JR105D, 4326, 4327, 4328, 4329, 4350T/CT/FCT, 4351T/CT/FCT<br />

Shape<br />

No.<br />

Wood<br />

Plywood (mm)<br />

Plastic (mm)<br />

Aluminum (mm)<br />

Stainless Steel<br />

(mm)<br />

Mild Steel<br />

(mm)<br />

Features / Application<br />

Working<br />

Length (mm)<br />

Tooth Per Inch<br />

Material<br />

Type of<br />

cutting<br />

Per<br />

pkg.<br />

Part No.<br />

Wood/ Basic<br />

B-13<br />

4-65<br />

4-65<br />

-<br />

-<br />

-<br />

For general cutting<br />

70<br />

8<br />

HCS<br />

5<br />

A-85656<br />

B-18<br />

2-35<br />

2-35<br />

-<br />

-<br />

-<br />

For scroll cutting<br />

45<br />

14<br />

HCS<br />

5<br />

A-85709<br />

Wood/ Fast<br />

B-16L<br />

5-<br />

135<br />

5-<br />

135<br />

-<br />

-<br />

-<br />

For fast and rough cutting<br />

150<br />

6<br />

HCS<br />

5<br />

792726-5<br />

B-17<br />

5-60<br />

5-60<br />

-<br />

-<br />

-<br />

For fast and scroll cutting<br />

70<br />

6<br />

HCS<br />

5<br />

A-85690<br />

Wood/ Finish<br />

B-10<br />

3-65<br />

3-65<br />

-<br />

-<br />

-<br />

For fast nish work,<br />

especially suitable<br />

for plywood<br />

75<br />

9<br />

HCS<br />

5<br />

A-85628<br />

B-11<br />

3-60<br />

3-60<br />

-<br />

-<br />

-<br />

For fast and nish work<br />

in wood and<br />

plastics<br />

75<br />

8<br />

HCS<br />

5<br />

A-85634<br />

B-29<br />

2-35<br />

2-35<br />

-<br />

-<br />

-<br />

For scroll cutting<br />

42<br />

16<br />

HCS<br />

5<br />

A-80400<br />

BR-13<br />

5-65<br />

-<br />

-<br />

-<br />

-<br />

For splinter free cuts<br />

in wood, requiring<br />

no sanding<br />

64<br />

9<br />

HCS<br />

5<br />

A-85793<br />

Hardwood / Decorative veneers<br />

B-25<br />

3-60<br />

3-60<br />

3-6<br />

-<br />

3-6<br />

For hardwood, thick<br />

mild steel plate<br />

and hard plastics<br />

75<br />

9<br />

HSS<br />

5<br />

A-85765<br />

Finish for decorative veneers<br />

B-19<br />

3-50<br />

3-50<br />

-<br />

-<br />

-<br />

Reverse tooth for splinter-free<br />

cuts. For tough plastics and<br />

decorative veneers<br />

75<br />

8<br />

HCS<br />

5<br />

A-85715<br />

Metal/ Basic<br />

51<br />

-<br />

1.5-6<br />

1.5-6<br />

1-3<br />

1-3<br />

For mild steel<br />

65<br />

24<br />

HSS<br />

5<br />

A-86561<br />

B-22<br />

-<br />

1-6<br />

1-3<br />

1-3<br />

1-3<br />

For fast and nish work<br />

in wood and<br />

plastics<br />

50<br />

24<br />

HSS<br />

5<br />

A-85737<br />

B-24<br />

-<br />

1-6<br />

1-2<br />

0.5-2<br />

0.5-2<br />

For very thin metal plate<br />

50<br />

32<br />

HSS<br />

5<br />

A-85759<br />

B-27<br />

-<br />

1-6<br />

1-3<br />

1-3<br />

1-3<br />

For scroll cutting in<br />

mild steel<br />

50<br />

24<br />

HSS<br />

5<br />

A-85787<br />

B-34<br />

-<br />

1.5-6<br />

1.5-3<br />

1.5-3<br />

1.5-3<br />

For mild steel, tough plastic<br />

Especially for<br />

thin metal plate<br />

50<br />

18<br />

HSS<br />

5<br />

B-10453<br />

Super Express Jigsaw Blade<br />

B-51<br />

-<br />

-<br />

-<br />

1-3<br />

1-8<br />

Fast cut for<br />

mild steel<br />

77<br />

9.8-<br />

18.1<br />

HSS<br />

5<br />

B-06476


Jigsaw / Recipro sawing 39<br />

Economy type Jig Saw blade<br />

For Model:<br />

DJV181, DJV182, DJV180, JV183D, JV0600, JV100D, J V101D,JV102 D, JV103D, JV141D, J V142D<br />

DJR185, JR102D, JR105D, 4326, 4327, 4328, 4329, 4350T/CT/FCT, 4351T/CT/FCT<br />

Shape<br />

No.<br />

Wood<br />

Plywood (mm)<br />

Plastic (mm)<br />

Aluminum (mm)<br />

Stainless Steel<br />

(mm)<br />

Mild Steel<br />

(mm)<br />

Features / Application<br />

Working<br />

Length (mm)<br />

Tooth Per Inch<br />

Material<br />

Type of<br />

cutting<br />

Per<br />

pkg.<br />

Part No.<br />

T111C<br />

4-50<br />

-<br />

-<br />

-<br />

-<br />

Wood / Basic<br />

74<br />

8<br />

HCS<br />

5<br />

D-34877<br />

T144D<br />

4-50<br />

-<br />

-<br />

-<br />

-<br />

Wood / Fast<br />

74<br />

6<br />

HCS<br />

5<br />

D-34883<br />

T244D<br />

4-65<br />

4-50<br />

-<br />

-<br />

-<br />

Wood / Fast, Curve<br />

70<br />

8<br />

HCS<br />

5<br />

D-34899<br />

T118A<br />

-<br />

-<br />

-<br />

-<br />

1-3<br />

Metal / Basic<br />

51<br />

21<br />

HSS<br />

5<br />

D-34908<br />

T101B<br />

4-65<br />

4-50<br />

-<br />

-<br />

-<br />

Wood / Finish<br />

70<br />

9<br />

HCS<br />

5<br />

D-44214<br />

Jig Saw Blade 100pc/ pack<br />

Type<br />

No. Application Part No.<br />

1<br />

Metal<br />

B-07783<br />

2<br />

Wood<br />

B-07799<br />

3<br />

Wood<br />

B-07808<br />

<strong>Makita</strong> type<br />

10<br />

Wood<br />

B-07820<br />

Jig Saw Blade 5 pcs set<br />

Type<br />

No. Application Part No.<br />

1<br />

Metal<br />

2<br />

Wood<br />

3<br />

Wood<br />

A-86882<br />

<strong>Makita</strong> type<br />

8<br />

10S<br />

Wood<br />

Wood


40<br />

Jigsaw / Recipro sawing<br />

Recipro saw blade<br />

Type<br />

Super Express Recipro saw Blade<br />

Teeth<br />

per<br />

inch<br />

Overall<br />

length<br />

(mm)<br />

Blade<br />

thickness<br />

(mm)<br />

Application<br />

Tooth<br />

Material<br />

Per<br />

pkg.<br />

Part No.<br />

7-18<br />

152<br />

0.9<br />

Fast cut for metal<br />

(Iron/steel 1.5-8.0mm, Plastic 5-77mm)<br />

Bi-Metal<br />

5<br />

B-05038<br />

6-11<br />

152<br />

0.9<br />

Fast cut for non-ferrous metal, aluminum,<br />

plastics, wood with nail, steel (Iron/steel 5-<br />

8mm, Plastic 5-77mm, Wood 5-77mm)<br />

Bi-Metal<br />

5<br />

B-05044<br />

For Metal / Basic<br />

No.21<br />

24<br />

125<br />

1.0<br />

For steel plate 1.5mm-3.0 mm.<br />

For iron pipe 50 mm dia. or less.<br />

HSS<br />

2<br />

B-00804<br />

No.22<br />

18<br />

165<br />

1.0<br />

For steel plate, aluminum 3.0mm-5.0mm.<br />

For iron pipe 90 mm dia. or less.<br />

HSS<br />

2<br />

B-00810<br />

No.24<br />

24<br />

165<br />

1.0<br />

For steel plate 1.5mm-3.0 mm.<br />

For iron pipe 90 mm dia. or less.<br />

HSS<br />

2<br />

B-00832<br />

18<br />

152<br />

0.9<br />

For thin metal 1.5-4.0mm.<br />

For iron pipe 100mm dia or less.<br />

Bi-Metal<br />

5<br />

B-05169<br />

For Wood / Heavy / TC<br />

8<br />

225<br />

1.25<br />

thick sheet metal 4-12mm, pipe


Jigsaw / Recipro sawing 41<br />

Board Cutter Blade<br />

For Model:<br />

DSD140, DSD180, SD100D<br />

Blade Length<br />

(mm)<br />

Blade width<br />

(mm)<br />

Blade thickness<br />

(mm)<br />

Application Tooth Material Per pkg. Part No.<br />

55<br />

18<br />

0.55<br />

Plasterboard<br />

(


42<br />

ACCESSORIES<br />

Brushing


Brushing 43<br />

Nylon Brush Set for drill (6mm shank, ne #240)<br />

Ideal for surface nishing for metal,<br />

wood and PVC.<br />

Slit paper wheel 120-40<br />

(For rust and paint removal)<br />

For Model:<br />

9741<br />

Part No.<br />

Wire Brush<br />

50mm(2") x<br />

6mm (1/4")<br />

Cup Brush<br />

50mm (2") x<br />

6mm (1/4")<br />

End Brush<br />

24mm (1") x<br />

6mm (1/4")<br />

Part No.<br />

D-70758<br />

Cotton buff wheel 120<br />

(For polishing)<br />

For Model:<br />

9741<br />

794380-1<br />

Nylon Brush Set for drill (6mm shank, coarse #80)<br />

Ideal for light rust and paint removal<br />

for metal, wood and PVC.<br />

Part No.<br />

794381-9<br />

Wire Brush<br />

50mm(2") x<br />

6mm (1/4")<br />

Cup Brush<br />

50mm (2") x<br />

6mm (1/4")<br />

End Brush<br />

24mm (1") x<br />

6mm (1/4")<br />

Part No.<br />

D-70742<br />

Wire brush wheel 120<br />

(For rust removal)<br />

For Model:<br />

9741<br />

Part No.<br />

794382-7<br />

Wire brush set for Drill<br />

Nylon brush wheel<br />

For Model:<br />

9741<br />

3 pcs. 6mm Wire brush set<br />

Application<br />

Part No.<br />

120-80 Coarse<br />

794384-3<br />

120-100 Medium<br />

794379-6<br />

Wire Brush<br />

120-240 Fine<br />

794383-5<br />

Cup Brush<br />

End Brush<br />

Part No.<br />

D-66070<br />

4 pcs. 6mm Wire brush set<br />

WIRE BRUSH:<br />

• 75mm diameter<br />

• 100mm diameter<br />

CUP WIRE BRUSH:<br />

• 63mm diameter<br />

• 75mm diameter<br />

Part No.<br />

D-65729<br />

Wire Cup brush, Crimped wire<br />

0.3mm crimped steel wire<br />

(Ideal for light rust removal<br />

from at surfaces and edges.)<br />

For all 100mm (4") Angle Grinder except for model N9500N.<br />

Size Spindle thread Part No.<br />

75mm<br />

M10 × 1.5<br />

D-24088


44<br />

ACCESSORIES<br />

Bonded Abrasive<br />

Long life Flexible Always use back up pad


Bonded Abrasive 45<br />

Abrasive Disc<br />

Validity<br />

Part number<br />

Size<br />

Max operating speed<br />

Standard<br />

Pictograms for safety use<br />

Spec<br />

Application<br />

Color code<br />

Blue: Metal<br />

How to read the spec.<br />

Aluminum Oxide Group ( mainly for metal & INOX )<br />

Brown Fused Aluminum : A<br />

The most common abrasive material for metal.<br />

White Aluminum Oxide : WA<br />

High purity abrasive material, eliminated<br />

extraneous elements from A. Higher grinding<br />

and cutting performance than A.<br />

Ceramic :<br />

Extremely sharp and high resistant to shock/heat/wear.<br />

High grade abrasive material with excellent grinding performance and durability.<br />

Single Aluminum Oxide : SA<br />

Alumina Zirconium : Z<br />

Gold: INOX<br />

Single crystal abrasive material with high tenacity.<br />

Higher durability and grinding/cutting performance<br />

than A.<br />

Green: Masonry<br />

Extremely sharp and hard abrasive material. Higher<br />

durability and grinding/cutting performance than SA.<br />

Silver: Aluminum<br />

Silicon Oxide Group (mainly for non-metallic)<br />

Black Silicon Carbide :<br />

The most common abrasive material for<br />

non-metal.<br />

C<br />

Green Silicon Carbide : GC<br />

Higher purity than C, eliminated extraneous elements,<br />

thus having higher grinding and cutting performance<br />

than C, but a little lower durability than C.<br />

Grit Size<br />

24 36 60 80 120<br />

Coarse<br />

Fine<br />

Hardness of grinding wheel<br />

Closer to A, softer grinding wheel is<br />

Closer to Z, harder grinding wheel is<br />

Soft grinding wheel<br />

Hard grinding wheel<br />

Hard work piece<br />

Soft work piece<br />

Very Soft Soft Middle Hard Very Hard<br />

A - G H - K L-O P - S<br />

T - Z<br />

Type of Bond<br />

BF : Reinforced resinoid bond<br />

V : Vitri ed bond


46<br />

Bonded Abrasive<br />

Accessories<br />

Abrasive Cut-off wheel for Metal stud<br />

Feature<br />

1. Thinner blade & the optimum bonding<br />

2. Ideal for cordless tools<br />

The amount of cutting per 1charge<br />

2.5mm thickness blade for<br />

smooth and fast cutting.<br />

The optimum bonding for<br />

fast cutting and longer life.<br />

Current<br />

100<br />

30%<br />

UP<br />

2.5 mm<br />

NEW<br />

130<br />

* The test results depend to a great extent on the hardness of materials, etc.<br />

* The number in the bar graphs are relative values when the capacity of current wheel is indexed at 100.<br />

Abrasive Cut-off wheel for INOX<br />

Feature<br />

1. Thinner blade & the optimum bonding<br />

2. Long life<br />

Life<br />

Heat-resistance property<br />

provides long life.<br />

Current<br />

100<br />

150%<br />

UP<br />

NEW<br />

250<br />

* The test results depend to a great extent on the hardness of materials, etc.<br />

* The number in the bar graphs are relative values when the capacity of current wheel is indexed at 100.


Bonded Abrasive 47<br />

Grinding wheel (Depressed Center Wheel) for Angle Grinder<br />

Diameter<br />

mm<br />

inches<br />

Thickness<br />

mm<br />

mm<br />

Bore<br />

inches<br />

Application<br />

Color<br />

Grit<br />

Part No.<br />

Selling<br />

UOM<br />

Packing<br />

100<br />

4<br />

6<br />

16<br />

5/8<br />

Metal<br />

Black<br />

A24P-BF<br />

D-72241<br />

per piece<br />

5/pack, 25/box<br />

200/master carton<br />

100<br />

4<br />

6<br />

16<br />

5/8<br />

Inox<br />

Stainless Steel<br />

Red<br />

WA36N<br />

A-80852<br />

per piece<br />

5/pack, 25/box<br />

200/master carton<br />

115<br />

4-1/2<br />

6<br />

22.23<br />

7/8<br />

Inox<br />

Stainless Steel<br />

Red<br />

WA36-BF<br />

A-80868<br />

per piece<br />

25/box<br />

100/master carton<br />

125<br />

5<br />

6<br />

22.23<br />

7/8<br />

Metal<br />

Black<br />

A24R<br />

D-18465<br />

per piece<br />

5/pack, 25/box<br />

100/master carton<br />

125<br />

5<br />

6<br />

22.23<br />

7/8<br />

Inox<br />

Stainless Steel<br />

Red<br />

WA36N<br />

A-80656<br />

per piece<br />

25/box<br />

100/master carton<br />

150<br />

6<br />

6<br />

22.23<br />

7/8<br />

Metal<br />

Black<br />

A24R<br />

D-26163<br />

per piece<br />

5/pack, 25/box<br />

100/master carton<br />

180<br />

7<br />

6<br />

22.23<br />

7/8<br />

Metal<br />

Black<br />

A24P-BF<br />

D-72257<br />

per piece<br />

5/pack, 25/box<br />

50/master carton<br />

180<br />

7<br />

6<br />

22.23<br />

7/8<br />

Inox<br />

Stainless Steel<br />

Red<br />

WA36O<br />

A-80880<br />

per piece<br />

10/pack, 5/box<br />

50/master carton<br />

230<br />

9<br />

6<br />

22.23<br />

7/8<br />

Metal<br />

Black<br />

A24R<br />

D-18487<br />

per piece<br />

5/pack, 25/box<br />

50/master carton<br />

Cut-off wheel ideal for cordless angle grinder / Portable Cut Off<br />

Diameter<br />

mm<br />

inches<br />

Thickness<br />

mm<br />

mm<br />

Bore<br />

inches<br />

Application<br />

Grit<br />

Part No.<br />

Selling<br />

UOM<br />

Packing<br />

100<br />

4<br />

0.80<br />

16<br />

5/8<br />

HD • Inox<br />

Stainless Steel<br />

Z60T<br />

B-45711<br />

per piece<br />

10/pack, 50/box<br />

400/master carton<br />

100<br />

4<br />

1.00<br />

16<br />

5/8<br />

HD • Inox<br />

Stainless Steel<br />

A60U<br />

E-03028<br />

per piece<br />

10/pack, 50/box<br />

400/master carton<br />

100<br />

4<br />

1.00<br />

16<br />

5/8<br />

Inox<br />

Stainless Steel<br />

WA46R-BF<br />

D-60997<br />

per piece<br />

10/pack, 50/box<br />

400/master carton<br />

100<br />

4<br />

1.20<br />

16<br />

5/8<br />

Inox<br />

Stainless Steel<br />

WA46R-BF<br />

D-65947<br />

per piece<br />

10/pack, 50/box<br />

400/master carton<br />

125<br />

5<br />

1.20<br />

22.23<br />

7/8<br />

Inox<br />

Stainless Steel<br />

WA60T<br />

D-18770-10<br />

per TIN<br />

10/Tin, 50/box<br />

200/master carton<br />

150<br />

6<br />

2.50<br />

22.23<br />

7/8<br />

Metal<br />

A30S<br />

D-29402<br />

per piece<br />

10/pack, 50/box<br />

200/master carton<br />

185<br />

7<br />

2.50<br />

22.23<br />

7/8<br />

Inox<br />

Stainless Steel<br />

A30S<br />

B-12267<br />

per piece<br />

10/pack, 50/box<br />

200/master carton<br />

185<br />

7<br />

2.00<br />

22.23<br />

7/8<br />

Metal<br />

A30S-BF<br />

D-18683<br />

per piece<br />

10/pack, 50/box<br />

100/master carton<br />

230<br />

9<br />

2.50<br />

22.23<br />

7/8<br />

Metal<br />

A30S<br />

D-18699<br />

per piece<br />

25/pack,<br />

50/master carton<br />

355<br />

14<br />

2.80<br />

25.4<br />

1<br />

Inox<br />

Stainless Steel<br />

A30P - 2.0G/LF<br />

B-64565<br />

per piece<br />

25 piece/box<br />

355<br />

14<br />

2.50<br />

25.4<br />

1<br />

Metal<br />

A36P - 2.0G/DC<br />

B-64696<br />

per piece<br />

5 piece/box<br />

355<br />

14<br />

2.50<br />

25.4<br />

1<br />

Metal<br />

A36P - 2.0G<br />

B-49448<br />

per piece<br />

25 piece/box,<br />

50 pieces / master carton<br />

355<br />

14<br />

3.00<br />

25.4<br />

1<br />

Metal<br />

A36P - 1.0G<br />

B-10730<br />

per piece<br />

25/pack,<br />

50/master carton<br />

355<br />

14<br />

2.40<br />

25.4<br />

1<br />

Metal<br />

A30Q - 1.0G<br />

B-20769-25<br />

per box<br />

25 piece/box<br />

355<br />

14<br />

3.00<br />

25.4<br />

1<br />

Metal<br />

A30Q - 1.0G<br />

B-20775-25<br />

per box<br />

25 piece/box


48<br />

Bonded Abrasive<br />

Grinding wheel for Bench grinder<br />

A Type<br />

B Type<br />

Diameter<br />

mm<br />

inches<br />

Thickness<br />

mm<br />

inches<br />

mm<br />

Bore<br />

inches<br />

For model<br />

Color<br />

Grit<br />

Part No.<br />

150<br />

6<br />

16<br />

5/8<br />

12.7<br />

1/2<br />

9306S, 9306<br />

Gb600, GB602W<br />

Grey<br />

A36M<br />

A-47173<br />

150<br />

6<br />

16<br />

5/8<br />

12.7<br />

1/2<br />

9306S, 9306<br />

Gb600, GB602W<br />

Grey<br />

A60M<br />

B-51910<br />

205<br />

8<br />

19<br />

3/4<br />

15.88<br />

5/8<br />

9308, GB801<br />

Grey<br />

A36M<br />

B-51948<br />

205<br />

8<br />

19<br />

3/4<br />

15.88<br />

5/8<br />

9308, GB801<br />

Grey<br />

A60M<br />

B-51954<br />

205<br />

8<br />

19<br />

3/4<br />

15.88<br />

5/8<br />

9308, GB801<br />

Grey<br />

GC120<br />

A-47254<br />

205<br />

8<br />

19<br />

3/4<br />

15.88<br />

5/8<br />

9308, GB801<br />

Grey<br />

GC120H<br />

B-51976<br />

Grinding wheel for Straight Grinder<br />

Diameter<br />

mm<br />

inches<br />

Thickness<br />

mm<br />

inches<br />

mm<br />

Bore<br />

inches<br />

For model<br />

Color<br />

Grit<br />

Part No.<br />

125 5 19 3/4<br />

12.7<br />

1/2<br />

9105, GS5000<br />

Grey<br />

24P<br />

741015-5<br />

125 5 19 3/4<br />

12.7<br />

1/2<br />

9105, GS5000<br />

Grey<br />

36P<br />

741016-3<br />

Flexible grinding wheel<br />

Wheel point<br />

Application:<br />

A: Mild steel, carbon steel, etc.<br />

WA: Hardened and special steels.<br />

Always use back-up pad<br />

Three-star range<br />

Size (mm) Grit # Part No.<br />

100 x 3 x 16 60 794229-5<br />

100 x 3 x 16 80 794231-8<br />

For Model:<br />

903, 906, GD0800C, GD0810C, GD0600, BGD800, BGD801<br />

No.<br />

Wheel dia.<br />

(mm)<br />

Shank<br />

size (mm)<br />

Type<br />

3<br />

10<br />

3<br />

A<br />

For Model:<br />

906, GD0800C, GD0810C, GD0600, BGD800, BGD801<br />

Part No.<br />

1 5 3 A 794050-2<br />

1 8 3 A 794053-6<br />

1 10 3 A 794053-6<br />

2 5 3 WA 794054-4<br />

2<br />

1<br />

4<br />

6<br />

19<br />

19<br />

3<br />

6<br />

1/4"<br />

WA<br />

WA<br />

WA<br />

794055-2<br />

794059-4<br />

741617-7<br />

741616-9


49<br />

Tungsten carbide burrs<br />

Cut and application - Standard cut<br />

For rough cut<br />

High efficiency<br />

Rough<br />

Metal, Stainless<br />

For Smooth cut - Diamond cut<br />

Less vibration<br />

Smooth<br />

Metal, Stainless<br />

For Non-farrous cut - Non-ferrous cut<br />

Less clogging up<br />

Rough<br />

Non-ferrous, Plastic<br />

Shape and application<br />

Shape : A<br />

Shape : C<br />

Shape : F<br />

Shape : L<br />

Shape : M<br />

Clean the burrs on inox<br />

Deburr of aluminium<br />

Wipe the welding line<br />

between steel piate<br />

Head Shape Suitable workplace Size ( d1 x L x l2) Cut type Application Part No.<br />

SA<br />

3/8" × 3/4" × 1/4" Standard Cut<br />

3/8" × 3/4" × 1/4"<br />

Diamond Cut<br />

3/8" × 3/4" × 1/4" Non-Ferrous Cut<br />

Metal & Inox<br />

Non-Ferrous<br />

B-52962<br />

B-52978<br />

B-52984<br />

SC<br />

3/8" × 3/4" × 1/4"<br />

3/8" × 3/4" × 1/4"<br />

3/8" × 3/4" × 1/4"<br />

Standard Cut<br />

Diamond Cut<br />

Non-Ferrous Cut<br />

Metal & Inox<br />

Non-Ferrous<br />

B-52990<br />

B-53001<br />

B-53017<br />

SF<br />

3/8" × 3/4" × 1/4"<br />

3/8" × 3/4" × 1/4"<br />

3/8" × 3/4" × 1/4"<br />

Standard Cut<br />

Diamond Cut<br />

Non-Ferrous Cut<br />

Metal & Inox<br />

Non-Ferrous<br />

B-53023<br />

B-53039<br />

B-53045<br />

SL<br />

3/8" × 1" × 1/4" Standard Cut<br />

3/8" × 1" × 1/4"<br />

Diamond Cut<br />

3/8" × 1 "× 1/4"<br />

Non-Ferrous Cut<br />

Metal & Inox<br />

Non-Ferrous<br />

B-53051<br />

B-53067<br />

B-53073<br />

SM<br />

3/8" × 3/4" × 1/4"<br />

3/8" × 3/4" × 1/4"<br />

3/8" × 3/4" × 1/4"<br />

Standard Cut<br />

Diamond Cut<br />

Non-Ferrous Cut<br />

Metal & Inox<br />

Non-Ferrous<br />

B-53089<br />

B-53095<br />

B-53104


50<br />

ACCESSORIES<br />

Coated Abrasive<br />

Hook & Loop backing<br />

Grit size<br />

Sanding wood<br />

Sanding wood<br />

Sanding wood<br />

Sanding wood, large<br />

surfaces<br />

Sanding paint<br />

Sanding paint<br />

Sanding plastic<br />

Removing paint<br />

Removing paint from<br />

metal or polishing<br />

Sanding metal<br />

Polishing<br />

Wood, hard and soft<br />

Ceramic


Coated Abrasive 51<br />

Accessories<br />

Flap disc<br />

Size<br />

Part number<br />

Pictograms for<br />

safety use<br />

Standard<br />

Application<br />

Large pictogram indicates<br />

recommended application<br />

Grain type/ Grit size<br />

Max operating speed<br />

Flap Disc<br />

Material: Aluminum oxide<br />

Fiber Glass<br />

Backing type<br />

Flap Disc<br />

Material: Zirconia aluminum<br />

Fiber Glass<br />

Backing type<br />

Application<br />

Best<br />

Application<br />

Best<br />

Better<br />

Angled<br />

Backing Shape<br />

Better<br />

Angled<br />

Backing Shape<br />

Industrial Flap Disc for Heavy Duty<br />

Dia.<br />

(mm)<br />

Economy type<br />

Dia.<br />

(mm)<br />

100<br />

(4")<br />

Hole dia.<br />

(mm)<br />

Hole dia.<br />

(mm)<br />

16<br />

(5/8")<br />

Grit #<br />

Grit #<br />

A 40<br />

A 60<br />

A 80<br />

A 120<br />

Part No.<br />

100 (4") 16 (5/8") A 60 D-26995<br />

Part No.<br />

D-63395<br />

D-63404<br />

D-63410<br />

D-63426<br />

Industrial Flap Disc for Heavy Duty<br />

Dia.<br />

(mm)<br />

100<br />

(4")<br />

Economy type<br />

Dia.<br />

(mm)<br />

100<br />

(4")<br />

Hole dia.<br />

(mm)<br />

16<br />

(5/8")<br />

Hole dia.<br />

(mm)<br />

16<br />

(5/8")<br />

Grit #<br />

A 36<br />

A 40<br />

A 60<br />

A 80<br />

A 120<br />

Grit #<br />

A 40<br />

A 60<br />

A 80<br />

A 120<br />

Part No.<br />

D-27377<br />

D-27383<br />

D-27399<br />

D-27408<br />

D-27414<br />

Part No.<br />

D-63703<br />

D-63719<br />

D-63725<br />

D-63731


52<br />

Coated Abrasive<br />

Abrasive Disc<br />

(Hook and Loop type)<br />

Abrasive Belt<br />

Pre-punched (8 hole) for Paint<br />

For Model: BO5030, BO5031, BO5040, BO5041, M9202M<br />

Disc<br />

Per<br />

Part<br />

Grit #<br />

dia.<br />

pkg.<br />

No.<br />

125 mm<br />

(5")<br />

Coarse<br />

Medium<br />

Fine<br />

40<br />

60<br />

80<br />

100<br />

120<br />

150<br />

180<br />

240<br />

320<br />

400<br />

10<br />

1<br />

10<br />

10<br />

10<br />

10<br />

50<br />

10<br />

1<br />

10<br />

10<br />

10<br />

10<br />

D-65816<br />

794542-1<br />

D-65822<br />

D-65838<br />

D-65844<br />

D-65850<br />

D-54710<br />

D-65866<br />

794545-5<br />

D-65872<br />

D-65888<br />

D-65894<br />

D-65903<br />

For Model: 9902, 9903<br />

Size<br />

76 x 533 mm<br />

(3" x 21")<br />

For Model: 9404, MT940, M9400M<br />

Size<br />

Grit #<br />

40<br />

60<br />

80<br />

100<br />

Grit #<br />

40<br />

60<br />

Part No.<br />

D-59265<br />

D-59271<br />

D-59287<br />

D-59293<br />

Part No.<br />

D-59346<br />

D-59352<br />

Per<br />

pkg.<br />

3<br />

3<br />

3<br />

3<br />

Per<br />

pkg.<br />

3<br />

3<br />

Abrasive Disc<br />

Pre-punched (9 hole) for Dry wall<br />

For Model: DSL800<br />

*Additional coat: Prevents clogging<br />

New Ceramic Abrasive Grain<br />

100 x 610 mm<br />

(4" x 24")<br />

80<br />

100<br />

120<br />

150<br />

180<br />

240<br />

D-59368<br />

D-59374<br />

D-59380<br />

D-59396<br />

D-59405<br />

D-59411<br />

3<br />

3<br />

3<br />

3<br />

3<br />

3<br />

Size Grit Part No.<br />

255mm<br />

(10")<br />

*A40<br />

*A150<br />

*A80<br />

*A120<br />

B-68389<br />

E-02375<br />

B-68395<br />

B-68404<br />

*A180 B-68410<br />

*A220 E-02381<br />

*A320 B-68426<br />

Backing pad for Angle grinders<br />

For use with Fiber Sanding Disc (Abrasive Disc)<br />

Spindle<br />

thread<br />

Wheel<br />

size<br />

100mm (4")<br />

Sanding Lock Nut<br />

Size<br />

(mm)<br />

Pad size<br />

(mm)<br />

Part<br />

No.<br />

For model: N9500N<br />

M10x1.25 30 224501-6<br />

For all 100mm (4") Grinder (Except N9500N)<br />

M10x1.50 30 224502-4<br />

Rubber Pad<br />

Max.<br />

rpm<br />

Part No.<br />

76 13,700 743009-6<br />

Spindle<br />

thread<br />

Sanding Lock Nut<br />

Size<br />

(mm)<br />

Part<br />

No.<br />

For model: 9005N, 9006N, GA7001L, GA7001,<br />

9227C, 9237CB<br />

M16x2.0 48 224523-6<br />

For model: GA5020, GA6020, GA7020, GA7050<br />

GA9020, 9218SB, 9207SPB, 9218PB<br />

9218PBL.<br />

M14x2.0 48 224515-5<br />

Wheel<br />

size<br />

125mm (5")<br />

100mm (4")<br />

Pad size<br />

(mm)<br />

115<br />

170<br />

Rubber Pad<br />

Max.<br />

rpm<br />

12,000<br />

8,500<br />

Part No.<br />

743015-1<br />

743012-7


Coated Abrasive 53<br />

Abrasive paper 230mm x 280mm (9" x 11")<br />

How to use<br />

Wool Pad<br />

(hook & loop type)<br />

(For high gloss polishing)<br />

1/2 sheet 1/3 sheet 1/4 sheet<br />

*When use 100mm size wool pad, use suitable pad for PO5000C<br />

Model No.<br />

DPV300, PV301D<br />

PO5000C<br />

(Use with Backing pad and Sleeve18)<br />

Disc dia.<br />

(mm)<br />

80<br />

100<br />

Part No.<br />

191N92-5<br />

D-67000<br />

BO5031, BO5041, PO5000C, DPO500, DBO180 125 D-70867<br />

DPO600 150 D-65735<br />

9227C, 9237CB 180 192629-7<br />

BO4900 etc BO3700, M9201M BO4555 etc<br />

Wool bonnet<br />

Abrasive paper 230mm x 280mm (9" x 11")<br />

One-star range<br />

for Wood<br />

For Model:<br />

All Finishing Sander, Handsanding<br />

Size<br />

230 x 280 mm<br />

(9" x 11")<br />

Grit<br />

No.<br />

40<br />

60<br />

per<br />

pkg.<br />

50<br />

50<br />

Part<br />

No.<br />

D-51683<br />

D-51699<br />

80 50 D-51708<br />

100 50 D-51714<br />

120 50 D-51720<br />

150 50 D-51736<br />

180 50 D-51742<br />

240 50 D-51758<br />

Model No.<br />

Disc dia.<br />

(mm)<br />

Part No.<br />

Use with Backing pad (Rubber Pad - 743009-6 & Sanding Lock Nut - 224502-4)<br />

GA4040C, GA024G, GA026G, GA030G,<br />

100 794172-8<br />

GA032G, DGA418<br />

Use with Backing pad (Rubber Pad & Sanding Lock Nut )<br />

9218PB, 9218PBL<br />

9207SPB, 9227C, 9237CB<br />

Wool bonnet double side<br />

180<br />

794176-0<br />

Abrasive paper 230mm x 280mm (9" x 11")<br />

One-star range<br />

For Model:<br />

All Finishing Sander, Handsanding<br />

In case of these items are used with power tools, dry use only.<br />

Size<br />

230 x 280 mm<br />

(9" x 11")<br />

Grit<br />

No.<br />

100<br />

120<br />

150<br />

180<br />

220<br />

280<br />

320<br />

400<br />

600<br />

800<br />

1000<br />

1200<br />

1500<br />

2000<br />

100<br />

120<br />

150<br />

per<br />

pkg.<br />

50<br />

50<br />

50<br />

50<br />

50<br />

50<br />

50<br />

50<br />

50<br />

50<br />

50<br />

50<br />

50<br />

50<br />

10<br />

10<br />

10<br />

Part<br />

No.<br />

D-58958<br />

D-58964<br />

D-58970<br />

D-58986<br />

D-58992<br />

D-59003<br />

D-59019<br />

D-59025<br />

D-59031<br />

D-59047<br />

D-59053<br />

D-56867<br />

D-59069<br />

D-59075<br />

D-66173<br />

D-66189<br />

D-66195<br />

Use with Adapter<br />

Model No.<br />

9218PB, 9218PBL<br />

9207SPB, 9227C, 9237CB<br />

9218PB, 9218PBL<br />

9207SPB, 9227C, 9237CB<br />

9218PB, 9218PBL<br />

9207SPB, 9227C, 9237CB<br />

Application<br />

General Purpose<br />

For Rough Finishing<br />

For Bright Finishing<br />

Adapter for Wool Bonnet Double Side<br />

Model No.<br />

9218SB, 9207SPB, 9218PB, 9218PBL, SA7000C<br />

9227C, 9237CB<br />

Disc dia.<br />

(mm)<br />

230<br />

230<br />

230<br />

Shank size<br />

(mm)<br />

M14<br />

M16<br />

Part No.<br />

D-56954<br />

D-70873<br />

D-70889<br />

Part No.<br />

D-56960<br />

D-57043


54<br />

Coated Abrasive<br />

Felt Pad<br />

(hook & loop type)<br />

(For removing wax)<br />

100mm (4") Diamond polishing pad<br />

(Hook & loop type)<br />

8 pads assortment (1 each) D-15805<br />

Model No.<br />

DBO180, BO5031, BO5041, DPO500, PO5000C<br />

Pad dia.<br />

(mm)<br />

125<br />

Part No.<br />

196152-4<br />

For Model:<br />

PW5000C, PW5001C<br />

Color Grit Part No.<br />

DPO600, PO6000C<br />

150<br />

193288-0<br />

Blue<br />

50<br />

D-37035<br />

Sponge pad<br />

(hook & loop type)<br />

Yellow<br />

Orange<br />

Red<br />

100<br />

200<br />

400<br />

D-37041<br />

D-37057<br />

D-37063<br />

Dark Green<br />

800<br />

D-37079<br />

Light Green<br />

1500<br />

D-37085<br />

Brown<br />

3000<br />

D-37091<br />

*When use 100mm size wool pad, use suitable pad for PO5000C<br />

Green<br />

Buff (Finishing)<br />

D-15659<br />

Model No.<br />

Disc dia.<br />

(mm)<br />

Part No.<br />

DPV300, PV301D (Yellow - Course)<br />

80<br />

191N90-9<br />

PO5000C<br />

100<br />

197912-7<br />

BO5031, BO5041, PO5000C, DPO500, DBO180<br />

150<br />

197914-3<br />

9227C, 9237CB (Yellow-Coarse)<br />

190<br />

D-70786<br />

9227C, 9237CB (White - Medium)<br />

190<br />

D-70792<br />

Rubber pad<br />

Use with pre-punched abrasive disc.<br />

Model No.<br />

DPO500, DPO600, PO5000C<br />

DPO500, DPO600, PO5000C<br />

Disc dia.<br />

(mm)<br />

125<br />

150<br />

Part No.<br />

197923-2<br />

197929-0<br />

Backing pad<br />

(Hook & loop type)<br />

(Use with Wool pad and Sleeve18 or Sponge pad)<br />

743125-4 Roloc Disc (Sample image) 743124-6<br />

743054-1<br />

Model No.<br />

DPV300, PV301D<br />

DPV300, PV301D (for ROLOC Disc)<br />

9227C, 9237CB<br />

Disc dia.<br />

(mm)<br />

75<br />

50<br />

165<br />

Part No.<br />

743125-4<br />

743124-6<br />

743054-1


55<br />

ACCESSORIES<br />

Multi Tool<br />

Tungsten carbide grit, #30<br />

Tungsten carbide grit, #30<br />

40<br />

Diamond grit, #40 #30<br />

Serrated edge<br />

Sharp blade<br />

Sharp blade<br />

Delta plate<br />

Sanding plate<br />

Pointed teeth<br />

Japan teeth


56<br />

Multi-tool<br />

For model DTM50 only<br />

Sawing<br />

For Model:<br />

DTM51, DTM50, DTM41, DTM40, TM3010C, TM3000C<br />

Size: W= width (mm), L=length (mm)<br />

General Joint Cutter<br />

TMA022<br />

Application/ Recommended Use<br />

Removing grout or mortar.<br />

Routing joints on oor tiles<br />

Size (mm) Type Part No.<br />

70 HM grit #40 B-21484<br />

Segment saw blade 65<br />

TMA002<br />

Application / Recommended Use<br />

Non-ferrous metal, FRP, PVC, suitable for corners.<br />

Dia. (mm) Type Part No.<br />

65 BiM-TiN B-21288<br />

HM Sanding Plate 78<br />

TMA025<br />

Application/ Recommended Use<br />

Removing motar or tile adhesive<br />

Removing carpet adhesive residues from a mineral surface<br />

Size (mm) Type Part No.<br />

78 HM grit # 30 B-21515<br />

Round saw blade 85<br />

TMA003<br />

Application / Recommended Use<br />

Non-ferrous metal, FRP, PVC.<br />

Dia. (mm) Type Part No.<br />

85 BiM-TiN B-21294<br />

Plunge cut saw blade 10<br />

TMA017<br />

Application / Recommended Use<br />

Metal<br />

Size (mm) Type Part No.<br />

10 x 20 BiM, Metal B-21434<br />

DTM52 / DTM50<br />

Scraper 52 Rigid<br />

TMA018 / TM065<br />

Application / Recommended Use<br />

Removing mortar or tile adhesive.<br />

Size (mm) Type Part No.<br />

52 x 26 HCS B-21440<br />

B-21440 (TM018)<br />

Segment saw blade 100 (Starlock)<br />

TMA005<br />

TMA046<br />

Application / Recommended Use<br />

Wood and metal, suitable for deep cutting.<br />

Dia. (mm) Type Part No.<br />

100 x 1.7 x15 TPI<br />

BiM, Wood & Metal B-64808<br />

Scraper 52 Flexible<br />

TMA019 / TMA066<br />

Application / Recommended Use<br />

Removing mortar or tile adhesive.<br />

Size (mm) Type Part No.<br />

52 x 45 HCS B-21456<br />

General Joint Cutter<br />

TMA021<br />

Application/ Recommended Use<br />

Cutting soft expansion joints<br />

Cutting window putty<br />

Cutting insulation materials<br />

Size (mm) Type Part No.<br />

28 x 50 HCS B-21478<br />

B-21456 (TM019)<br />

Plunge cutting saw blades<br />

Bow Shape plunge cut saw blade 32<br />

TMA047<br />

Application/ Recommended Use<br />

Wood and Metal / Suitable for Precisely plunge cut<br />

Plunge cut in hardwood<br />

Size (mm)<br />

32 x 50 x 1.3 x 20 TPI<br />

Bow Shape plunge cut saw blade 32<br />

TMA053<br />

Application/ Recommended Use<br />

Hard Wood/ Suitable for Precisely plunge cut<br />

Plunge cut in hardwood<br />

Cutting a recess in furniture components<br />

Plunge cut in laminate panels<br />

Size (mm)<br />

Type<br />

BiM, Wood & metal<br />

Type<br />

Part No.<br />

B-64814<br />

Part No.<br />

32 x 50 x 1.8 x14 TPI<br />

BiM, Wood<br />

B-64870


Multi-tool 57<br />

Plunge cut saw blade 20<br />

TMA058<br />

Application/ Recommended Use<br />

Metal/ Suitable for ush cutting in nails or copper pipe<br />

Plunge cuts in plasterboard<br />

Size (mm) Type Part No.<br />

20 x 30 BiM, Metal B-64923<br />

General Joint Cutter<br />

TMA024<br />

Application/ Recommended Use<br />

Routing joints on wall and oor tiles<br />

Smaller cutouts in soft wall tiles<br />

Routing grooves in porous concrete, for laying concealed cables and pipes<br />

Size (mm) Type Part No.<br />

65 HM grit #50 B-21509<br />

Plunge cut saw blade 32<br />

TMA059<br />

Application/ Recommended Use<br />

Metal/ Suitable for ush cutting in nails or copper pipe<br />

Plunge cuts in plasterboard<br />

Size (mm) Type Part No.<br />

Diamond Seg Saw blade<br />

32 x 50 BiM, Metal B-64939<br />

Scraping<br />

Scraper 52 Rigid<br />

TMA018 / TM065<br />

Application / Recommended Use<br />

Removing mortar or tile adhesive.<br />

Size (mm) Type Part No.<br />

52 x 26 HCS B-64989<br />

Scraper 52 Flexible<br />

TMA019 / TMA066<br />

B-64989 (TM065)<br />

Diamond Seg Saw blade 65<br />

TMA026<br />

Application/ Recommended Use<br />

Cutout of soft wall tiles and FRP<br />

Routing recesses in epoxy/glass ber reinforced plastic<br />

Routing joints on wall tiles<br />

Size (mm) Type Part No.<br />

65 Diamond grit #40 B-21521<br />

Diamond Seg Saw blade 85<br />

TMA070<br />

Application/ Recommended Use<br />

Cutout of soft wall tiles and FRP<br />

Routing recesses in epoxy/glass ber reinforced plastic<br />

Routing joints on wall tiles<br />

Size (mm) Type Part No.<br />

85 Diamond grit #40 B-65034<br />

Application / Recommended Use<br />

Removing mortar or tile adhesive.<br />

Size (mm) Type Part No.<br />

B-64995 (TM066)<br />

Riff sanding<br />

52 x 40 HCS B-64995<br />

Routing and Rasping<br />

TC Sanding Plate 78<br />

TMA073<br />

TC Seg Saw Blade 70<br />

TMA071<br />

Application/ Recommended Use<br />

Routing extra-thin 1/16'' joints on wall tiles<br />

Routing recesses in epoxy/glass ber reinforced plastic<br />

Routing grooves in porous concrete, for laying concealed cables and pipes<br />

Size (mm) Type Part No.<br />

Application/ Recommended Use<br />

Removing motar or tile adhesive<br />

Removing carpet adhesive residues from a mineral surface<br />

Size (mm) Type Part No.<br />

78 TC/HM grit # 20 B-65062<br />

70 TC / HM grit #40 B-65040


58<br />

Multi-tool<br />

Sanding pad<br />

TMA078<br />

Multi tool Starlock blade sets<br />

Tile Set<br />

TMA058 Plunge cut saw blade 20<br />

TMA065 Scraper 52 rigid<br />

TMA069 HM Seg saw blade 85<br />

TMA073 HM Sanding plate 78<br />

Paper size<br />

(mm)<br />

93<br />

Type<br />

hook & loop<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

1 B-65115<br />

Part No.<br />

B-67496<br />

Abrasive delta paper<br />

Use with Sanding pad (B-65115)<br />

(hook & loop type)<br />

Wood / long-life<br />

Suitable for sanding wood, hard wood, chipboard, construction boards and metal<br />

Paper size<br />

(mm)<br />

94<br />

Grit #<br />

60<br />

Per<br />

pkg.<br />

Part<br />

No.<br />

10 B-21565<br />

80 10 B-21571<br />

100 10 B-21587<br />

120 10 B-21593<br />

180 10 B-21602<br />

240 10 B-22931<br />

Floor Set<br />

TMA045 Segment saw blade 85<br />

TMA048 Plunge cut saw blade 65<br />

TMA051 Plunge cut saw blade 32<br />

TMA066 Scraper 52 Flexible<br />

Part No.<br />

B-67505<br />

Plunge Cut Set<br />

TMA045 Segment saw blade 85<br />

TMA047 Plunge cut saw blade 32<br />

TMA053 Bow plunge cut saw blade 32<br />

TMA058 Plunge cut saw blade 20<br />

Part No.<br />

B-67480<br />

Polishing eece<br />

Suitable for removing the rust of metal and the dirt of wood<br />

Paper size<br />

(mm)<br />

94<br />

94<br />

Grit #<br />

Coarse / 100<br />

Medium / 280<br />

Per<br />

pkg.<br />

1<br />

1<br />

Part<br />

No.<br />

B-21808<br />

B-21799<br />

Carpentry Set<br />

TMA045 Segment saw blade 85<br />

TMA047 Plunge cut saw blade 32<br />

TMA053 Bow plunge cut saw blade 32<br />

Sanding Pad x 2pcs<br />

Part No.<br />

B-67511


59<br />

ACCESSORIES<br />

Diamond<br />

Thread / Dia<br />

Dia / Bore<br />

Max speed<br />

Wet<br />

Dry<br />

Not permitted for face<br />

grinding


60<br />

Diamond<br />

Diamond Wheels<br />

Segmented Type:<br />

Most commonly used. Blade has slits and<br />

layers of diamond are sintered on edges.<br />

Cut faster than continuous rim type<br />

and attain average cutting surface.<br />

Segmented Wave Type:<br />

This wheel has slits like segmented wheel.<br />

Each segment has many notches (Wave).<br />

These notches assure;<br />

• Fast cutting with less resistance.<br />

• Smooth debris removal.<br />

• Less loading on wheel.<br />

Corrugated Type:<br />

This wheel has notches around the Rim.<br />

Has a characteristic between Continuous Rim<br />

and Segmented Type. Has faster cutting<br />

like Segmented Type. At the same time,<br />

can attain cleaner surface like continuous<br />

rim without broken edges.<br />

Continuous Rim Type:<br />

Has layer of diamond with uniform<br />

thickness around the entire rim.<br />

Can attain clean surface even on crusty,<br />

brittle materials. Cut with accuracy but not<br />

as fast as segmented type wheel.<br />

SPECIALIZED<br />

Electrodeposited Type:<br />

Diamonds are electrodeposited and has more<br />

exposure than bonded type.<br />

Cuts faster and more efficient.<br />

Vacuum brazed Type:<br />

Diamonds are vacuum brazed and has more<br />

exposure than bonded type.<br />

Able to cut harder material.<br />

It is longer life than electrodeposited type<br />

because diamonds are held tightly.<br />

Crack Chaser:<br />

Blade is thicker than regular blades.<br />

Designed for repair the wall easily.


Diamond 61<br />

Diamond Wheel<br />

(EN) : EN13236<br />

AA: Specially suitable, A: Suitable<br />

Ring<br />

(10 pcs./set)<br />

(mm)<br />

Description (H)Outer Dia (D)Hole Dia Part No.<br />

Ring 20 22.23 20 A-85248<br />

Ring 16 20 16 A-86860<br />

Material<br />

Material No. 1<br />

Hard concrete Granite Gneiss<br />

Smoothable<br />

Engineering<br />

Carbonaceous Shale<br />

Sidewalk Slate<br />

Engineering Block/<br />

Engineering Block<br />

Class 2<br />

Material No. 2 Material No. 3<br />

Concrete Block U-shaped Groove Sidewalk Block Cemented Tile Marble Unglazed Tile<br />

Material No. 4 Material No. 5 Material No. 6 Material No. 7<br />

Brick Aggregate Block French Tile Asphalt Tile Glass<br />

Packaging<br />

Plastic pouch Paper box Paper blister Clamp shell


62<br />

Diamond<br />

Continuous rim<br />

< Wet type><br />

Grade Type<br />

Wet<br />

Wet<br />

Wet<br />

Wet<br />

Wet<br />

Diameter<br />

mm inches<br />

80 3<br />

110 4<br />

110<br />

180<br />

4<br />

7<br />

180 7<br />

T X H d Color<br />

0.9 4.0 15 - Silver<br />

1.6 5.0 20 - Gold<br />

1.2<br />

2.2<br />

5.0<br />

5.0<br />

20<br />

25.4<br />

-<br />

-<br />

Violet<br />

Violet<br />

1.85 4.0 25.4 - Gold<br />

For material<br />

1 2 3 4 5 6 7<br />

- - - - - AA -<br />

- AA AA A - A -<br />

Ideal for bulletproof glass AA<br />

- AA A A - AA -<br />

A AA AA A A AA -<br />

For model Packaging Part No.<br />

CC330D Paper box B-21082<br />

110mm Cutter Paper blister D-05212<br />

110mm Cutter Paper blister D-40705<br />

180mm Cutter Paper box D-44264<br />

180mm Cutter Clamp shell A-87161<br />

Segmented<br />

< Dry type><br />

Grade<br />

Type<br />

Dry<br />

Dry<br />

Dry<br />

Dry<br />

Dry<br />

Dry<br />

Dry<br />

Dry<br />

Corrugated<br />

Diameter<br />

mm<br />

105<br />

105<br />

105<br />

125<br />

180<br />

180<br />

255<br />

350<br />

inches<br />

4<br />

4<br />

4<br />

5<br />

7<br />

7<br />

10<br />

14<br />

T X H d Color<br />

2.0<br />

2<br />

1.8<br />

1.8<br />

2.2<br />

2.3<br />

2.6<br />

ND<br />

7.0<br />

7.0<br />

7.0<br />

7.0<br />

7.0<br />

7.0<br />

7.8<br />

ND<br />

20.00<br />

20.00<br />

20.00<br />

22.23<br />

22.23<br />

25.40<br />

25.40<br />

25.40<br />

16.00<br />

16.00<br />

16.00<br />

-<br />

-<br />

22.23<br />

-<br />

20.00<br />

Gold<br />

Gold<br />

Silver<br />

White<br />

Gold<br />

Gold<br />

Gold<br />

Gold<br />

For material<br />

1 2 3 4 5 6 7<br />

A<br />

-<br />

AA<br />

-<br />

A<br />

-<br />

-<br />

-<br />

AA<br />

AA<br />

AA<br />

AA<br />

AA<br />

AA<br />

AA<br />

AA<br />

A<br />

AA<br />

A<br />

AA<br />

A<br />

AA<br />

AA<br />

AA<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

-<br />

A<br />

-<br />

-<br />

-<br />

A<br />

A<br />

A<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

-<br />

For model Packaging Part No.<br />

110mm Cutter<br />

110mm Cutter<br />

110mm Cutter<br />

125mm Grinder<br />

180mm Cutter<br />

180mm Cutter<br />

255mm Cutter<br />

350mm Cutter<br />

Paper box<br />

Paper blister<br />

Clamp shell<br />

Paper box<br />

Paper box<br />

Clamp shell<br />

Clamp shell<br />

Clamp shell<br />

D-42531<br />

D-05197<br />

D-42656<br />

Dry 105 4 2.0 8.0 20.00 16.00 White AA A AA A - - - 100mm Grinder Plastic pouch D-63688<br />

D-52766<br />

D-44286<br />

A-84121<br />

A-80444<br />

D-56998<br />

< Dry type><br />

Grade Type<br />

Dry<br />

Dry<br />

Dry<br />

Dry<br />

Dry<br />

Diameter<br />

mm inches<br />

105 4<br />

105 4<br />

110<br />

125<br />

4-3/8<br />

5<br />

180 7<br />

T X H d Color<br />

2.2 7.0 20.00 16.00 Silver<br />

2.0 7.0 20.00 16.00 Gold<br />

1.3 7.0 20.00 16.00 Violet<br />

2.2 7.0 22.23 - White<br />

2.6 7.0 22.23 - Silver<br />

For material<br />

1 2 3 4 5 6 7<br />

AA A AA A - - -<br />

- AA AA A A - -<br />

- AA AA A - - -<br />

- AA AA A - - -<br />

AA A AA A - - -<br />

For model Packaging Part No.<br />

110mm Cutter Paper box D-42553<br />

110mm Cutter Paper blister D-05206<br />

110mm Cutter Paper blister D-51057<br />

125mm Grinder Paper box D-52803<br />

180mm Cutter Paper box D-44317<br />

Vacuum Brazed Diamond Blade / Metal<br />

Grade<br />

Diameter<br />

mm<br />

100<br />

355<br />

inches<br />

4<br />

14<br />

T X H d Color<br />

1.3<br />

3.3<br />

1.5<br />

4.0<br />

16.00<br />

25.40<br />

-<br />

-<br />

Violet<br />

Violet<br />

For material<br />

1 2 3 4 5 6 7<br />

For Metal<br />

For model Packaging Part No.<br />

230 9 1.3 1.5 22.23 - Violet For Metal<br />

230mm Grinder Clamp shell B-53718<br />

For Metal<br />

100mm Grinder<br />

14" Portable<br />

Cut-off<br />

Clamp shell<br />

Paper box<br />

B-53671<br />

D-41414<br />

Segmented Corrugated<br />

< Dry type><br />

Grade<br />

Type<br />

Diameter<br />

mm<br />

inches<br />

T X H d Color<br />

For material<br />

1 2 3 4 5 6 7<br />

For model Packaging Part No.<br />

Dry 180 7 2.60 7.0 22.23 - Blue AA AA A A - - - 180mm Grinder Paper box D-44339<br />

Specialized / Vacuum brazed Rescue Diamond Wheel<br />

Multi cut<br />

< Dry type><br />

Grade<br />

Type<br />

Dry<br />

Dry<br />

Dry<br />

Diameter<br />

mm<br />

100<br />

350<br />

405<br />

inches<br />

4<br />

14<br />

16<br />

T X H d Color<br />

2.70<br />

2.80<br />

3.60<br />

4.0<br />

4.0<br />

4.0<br />

16.00<br />

25.40<br />

25.40<br />

-<br />

20.00<br />

-<br />

Red<br />

Red<br />

Red<br />

For material<br />

1 2 3 4 5 6 7<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

A<br />

For model Packaging Part No.<br />

100mm Grinder<br />

350mm Power<br />

cutter<br />

405mm Power<br />

cutter<br />

Clamp shell<br />

Clamp shell<br />

B-66933<br />

Dry 230 9 3.10 4.0 22.23 - Red A A A A A A A 230mm Grinder Clamp shell B-55326<br />

Clamp shell<br />

B-55348<br />

B-66955


Diamond 63<br />

Accessories<br />

Offset Diamond Wheels<br />

Single<br />

Rough work<br />

This wheel grind more efficiency.<br />

Faster than the wheel for standard work.<br />

Double<br />

Segmented<br />

Fan<br />

Standard work<br />

This wheel has a characteristic between Rough work<br />

offset diamond wheels and Fine work offset diamond<br />

wheels.<br />

Turbo<br />

Rim<br />

Fine work<br />

This wheel is suitable for cleanup and nish work<br />

and chamfering works.<br />

SPECIALIZED<br />

PCD<br />

Removal of paint<br />

This wheel is suitable for removal of<br />

polyurethane, adhesive, paint, epoxy and<br />

acrylic coating.<br />

PCD is an abbreviations of "Polycrystalline<br />

Diamond". It is a kind of an arti cial diamond<br />

and superior in hardness and durability.<br />

Vacuum brazed<br />

For hard materials<br />

This wheel is suitable for hard materials.<br />

Diamonds are held tightly.<br />

Low Vibration Offset Diamond Wheel<br />

Low Vibration<br />

The vibration is not conducted to the worker's hand and able to ease the load a lot!!<br />

Less Tapping<br />

Clinging to the material and able to cut smoothly, faster and more efficient.<br />

Low Vibration Type<br />

Normal<br />

Low<br />

Vibration<br />

Type


64<br />

Diamond<br />

Specialized/PCD Offset Diamond Wheel<br />

Application<br />

D H Color For model Part No.<br />

For removal of<br />

polyurethane,<br />

adhesive, paint,<br />

epoxy and acrylic<br />

coatings<br />

125 22.23 Black<br />

PC5000,<br />

PC5001C,<br />

125mm<br />

Grinder<br />

B-53160<br />

Clamp shell<br />

Offset Diamond Wheel<br />

Application<br />

D H Color Type For model Part No.<br />

Concrete<br />

(Rough)<br />

100<br />

22.23 mm<br />

with<br />

16.00 mm<br />

Ring<br />

Silver<br />

Single<br />

100mm<br />

&<br />

125mm<br />

Grinder<br />

D-62284<br />

Single<br />

Concrete<br />

(Standard<br />

work)<br />

100<br />

22.23 mm<br />

with<br />

16.00 mm<br />

Ring<br />

Silver<br />

Double<br />

100mm<br />

&<br />

125mm<br />

Grinder<br />

D-62309<br />

Paper Box<br />

Double<br />

Vacuum Brazed diamond core bit<br />

Diamond core bit (Dry Type)<br />

When drilling with diamond core bit, always use ''rotation only''.<br />

Center bit (A-80503), Core bit shank (A-80519)<br />

For Model:<br />

8406, 8406C<br />

Spindle thread: M10 x 1.50<br />

Material : Granite/Marble/Porcelain Tile<br />

For 100mm Angle Grinder<br />

Not compatible with model N9500N<br />

Core Bit Shank<br />

A-80519<br />

Php 1,600.00<br />

Center Bit<br />

A-80503<br />

Php 1,100.00<br />

Size (mm)<br />

5<br />

6<br />

8<br />

10<br />

12<br />

14<br />

16<br />

Part No.<br />

D-63264<br />

D-63270<br />

D-63286<br />

D-63292<br />

D-63301<br />

D-63317<br />

D-63323<br />

Spindle thread M18<br />

13mm straight shank (three at)<br />

Capacity (Diameter x Depth)<br />

38 x 165mm<br />

54 x 165mm<br />

65 x 165mm<br />

70 x 165mm<br />

80 x 165mm<br />

105 x 165mm<br />

Part No.<br />

A-85042<br />

A-85058<br />

A-85064<br />

A-85070<br />

A-80472<br />

A-80488<br />

20<br />

D-63339<br />

25<br />

D-63345<br />

32<br />

D-63351<br />

37<br />

40<br />

50<br />

D-63367<br />

D-63373<br />

D-63389<br />

Vacuum Brazed diamond pin drill<br />

For: 13mm Driver Drill<br />

Material : Granite/Marble/Porcelain Tile<br />

Size (mm) Spindle thread Part No.<br />

6<br />

8<br />

10<br />

6mm x 12.5mm<br />

8mm x 12.5mm<br />

10mm x 12.5mm<br />

B-51823<br />

B-51839<br />

B-51845


65<br />

ACCESSORIES<br />

Planing / Routering


66<br />

Planing / Routering<br />

Planer blade<br />

HSS(High Speed Steel): Fine cutting surface.<br />

TC(Tungsten Carbide): Higher durability.<br />

Suitable for hard wood.<br />

Cutter blade<br />

Carbide-tipped plate joiner blade<br />

For model Size Material Per pkg. Part No.<br />

1600 80mm (3-1/8") HSS 1 A-07397<br />

1100, DKP180<br />

DKP181, N1900B<br />

N1923B, KP0800<br />

M1902M, MT190<br />

1911B<br />

1804N<br />

1805N<br />

1806B<br />

2012NB<br />

2030<br />

2040<br />

82mm (3-1/4") HSS 1 D-16346<br />

82mm (3-1/4") HSS 5 D-67234<br />

82mm (3-1/4") TC 1 D-07967<br />

110mm (4-3/8")<br />

136mm (5-3/8")<br />

155mm (6-1/8")<br />

170mm (6-3/4")<br />

306mm (12")<br />

306mm (12")<br />

400mm (15-3/4")<br />

HSS<br />

HSS<br />

HSS<br />

HSS<br />

HSS<br />

HSS<br />

HSS<br />

Mini planer blade<br />

(2 blades per pkg.)<br />

The blade has edges on both sides for long life.<br />

HSS(High Speed Steel): Fine cutting surface.<br />

TC(Tungsten Carbide): Higher durability.<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

1<br />

D-71211<br />

A-07428<br />

793013-5<br />

793186-4<br />

793350-7<br />

793018-5<br />

793019-3<br />

For Model:<br />

3901,PJ7000, DPJ180, DPJ140<br />

*North American Package<br />

Blade dia.<br />

(mm)<br />

Hole dia.<br />

(mm)<br />

Tip Thickness<br />

(mm)<br />

Part<br />

No.<br />

100 22 4 793382-4<br />

Cutter blade<br />

Dia. 120mm<br />

For Model:<br />

3501N<br />

Blade width<br />

(mm)<br />

3.0 (1/8")<br />

3.9 (5/32")<br />

Dry wall guide bit<br />

For Cut Out Tool<br />

Model: 3706, DCO180, DCO181<br />

Part<br />

No.<br />

793022-4<br />

793024-0<br />

For model Size Material Per pkg. Part No.<br />

1100, DKP180<br />

DKP181, N1900B<br />

N1923B, KP0800<br />

M1902M, MT190<br />

2012NB<br />

82mm (3-1/4") TC 1 A-82921<br />

306mm (12")<br />

Router bit set<br />

(12 pc/ set)<br />

Range: Three-star<br />

★★★<br />

Size: 1/4"<br />

Material: TC (Tungsten Carbide)<br />

HSS<br />

1<br />

793346-8<br />

Size<br />

3.18mm(1/8'')<br />

6.35mm(1/4'')<br />

Part<br />

No.<br />

191G69-8<br />

193447-6<br />

#1<br />

#2<br />

#3<br />

#4<br />

#5<br />

#6<br />

#7<br />

#8<br />

#9<br />

#10<br />

#11<br />

#12<br />

Part No.<br />

D:12.7<br />

R:6.35<br />

B:8.8<br />

L:29.0<br />

D:16.0<br />

B:20.0<br />

L:28.0<br />

D:6.0<br />

B:20.0<br />

L:25.0<br />

D:28.6<br />

R:9.5<br />

B:17.0<br />

L:25.5<br />

D:12.7<br />

B:9.1<br />

A:90°<br />

L:29.0<br />

D:25.0<br />

R:4.0<br />

B:16.0<br />

L:26.5<br />

D:22.2<br />

R:6.3<br />

B:13.5<br />

L:25.0<br />

D:22.0<br />

R:6.3<br />

B:12.7<br />

L:26.5<br />

D:12.7<br />

B:12.7<br />

A:14°<br />

L:29.0<br />

D:32.0<br />

B:12.2<br />

A:45°<br />

L:30.0<br />

D:12.7<br />

B:13.0<br />

L:29.0<br />

D:12.0<br />

B:20.0<br />

L:28.0<br />

A-91051<br />

Straight Bit<br />

Material: TC (Tungsten Carbide)<br />

(Inch)<br />

(Inch)<br />

D<br />

A1 L1 L2 Part No.<br />

1/4" 6mm 50mm 15mm D-09173<br />

1/4" 8mm 50mm 18mm D-15388<br />

1/2" 10mm 60mm 25mm D-15512<br />

1/2" 12mm 60mm 30mm D-07901<br />

Ball Bearing Flush Trimming Bit<br />

Material: TC (Tungsten Carbide)<br />

D<br />

A1 L1 L2 Part No.<br />

1/4" 1/4" 50mm 15mm D-58528<br />

1/4" 10mm (3/8") 50mm 20mm D-04313


Planing / Routering 67<br />

Straight Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

1/4"<br />

Part No.<br />

RBIT 113411<br />

5/16"<br />

RBIT 113421<br />

3/8"<br />

RBIT 113431<br />

1/2"<br />

1/2"<br />

5/8"<br />

RBIT 113453<br />

RBIT 113473<br />

3/4"<br />

RBIT 113485<br />

1"<br />

RBIT 113413<br />

1/2" L (Long)<br />

RBIT 113457<br />

3/16"<br />

RBIT 110031<br />

1/4"<br />

RBIT 112011<br />

1/4"<br />

5/16"<br />

RBIT 112023<br />

1/2"<br />

RBIT 112053<br />

3/8"<br />

RBIT 112033<br />

“U” Grooving Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

3/8"<br />

RBIT 208411<br />

1/2"<br />

RBIT 208421<br />

1/2"<br />

3/4"<br />

RBIT 208441<br />

1"<br />

RBIT 208451<br />

5/8"<br />

RBIT UGB5812<br />

1/4"<br />

RBIT 208031<br />

1/4"<br />

3/8"<br />

1/2"<br />

RBIT 208041<br />

RBIT 208051<br />

3/4"<br />

RBIT 208071<br />

“V” Grooving Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

3/8"<br />

RBIT 202411<br />

1/2"<br />

RBIT 202421<br />

1/2"<br />

5/8"<br />

RBIT 202431<br />

3/4"<br />

RBIT 202441<br />

7/8"<br />

RBIT 202451<br />

1/4"<br />

3/8"<br />

1/2"<br />

RBIT 202011<br />

RBIT 202021<br />

Ball Bearing Flush Trimming Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/2"<br />

3/8"<br />

1/2"L (Long)<br />

RBIT 120021<br />

RBIT 120461


68<br />

Planing / Routering<br />

Beading Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/8"<br />

RBIT 302411<br />

3/16"<br />

RBIT 302421<br />

1/2"<br />

1/4"<br />

5/16"<br />

RBIT 302431<br />

RBIT 302441<br />

3/8"<br />

RBIT 302451<br />

1/2"<br />

RBIT 302461<br />

1/8"<br />

RBIT 302011<br />

3/16"<br />

RBIT 302021<br />

1/4"<br />

1/4"<br />

5/16"<br />

RBIT 302031<br />

RBIT 302041<br />

3/8"<br />

RBIT 302051<br />

1/2"<br />

RBIT 302061<br />

Ogee Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/2"<br />

3/16"<br />

9/32"<br />

RBIT 316411<br />

RBIT 316421<br />

1/4"<br />

3/16"<br />

9/32"<br />

RBIT 316011<br />

RBIT 316021<br />

Corner Rouding Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

1/4"<br />

Part No.<br />

RBIT 301431<br />

5/16"<br />

RBIT 301441<br />

3/8"<br />

RBIT 301451<br />

1/2"<br />

1/2"<br />

RBIT 301461<br />

5/8"<br />

RBIT 301471<br />

3/4"<br />

RBIT 301481<br />

1"<br />

RBIT 301501<br />

1/8"<br />

RBIT 301011<br />

3/16"<br />

RBIT 301021<br />

1/4"<br />

1/4"<br />

5/16"<br />

RBIT 301031<br />

RBIT 301041<br />

3/8"<br />

RBIT 301051<br />

1/2"<br />

RBIT 301061<br />

Cove Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/4"<br />

RBIT 308421<br />

1/2"<br />

3/8"<br />

RBIT 308431<br />

1/2"<br />

RBIT 308441<br />

1/8"<br />

RBIT 308011<br />

3/16"<br />

RBIT 305012<br />

1/4"<br />

1/4"<br />

RBIT 308021<br />

3/8"<br />

RBIT 308031<br />

1/2"<br />

RBIT 308041


Planing / Routering 69<br />

Dove Tail Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

1/2"<br />

Blade size<br />

(A1)<br />

3/8"<br />

1/2"<br />

Part No.<br />

RBIT 206411<br />

RBIT 212421<br />

5/8"<br />

RBIT 212041<br />

1/4"<br />

3/8"<br />

RBIT 212011<br />

1/2"<br />

RBIT 212221<br />

Core Box Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/4"<br />

RBIT 206008<br />

3/8"<br />

RBIT 212421<br />

1/4"<br />

1/2"<br />

RBIT 212041<br />

5/8"<br />

RBIT 212011<br />

3/4"<br />

RBIT 212221<br />

Slotted Cutter Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

1/2"<br />

Blade size<br />

(A1)<br />

1/8"<br />

Part No.<br />

RBIT 312011<br />

1/4" RBIT 312431<br />

1/4"<br />

1/4"<br />

RBIT 312031<br />

Rubbeting Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

1/2"<br />

Blade size<br />

(A1)<br />

1/2"<br />

Part No.<br />

RBIT 312551B<br />

5/8" RBIT 307153<br />

1/4"<br />

3/8"<br />

1/2"<br />

5/8"<br />

RBIT 312051<br />

RBIT 312151<br />

RBIT 312551A<br />

Chamfering Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

1/2"<br />

Blade size<br />

(A1)<br />

Part No.<br />

5/8" RBIT 310431


70<br />

Planing / Routering<br />

Board Jointing Bit (A & B)<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/2"<br />

1/4"<br />

RBIT 540411<br />

1/4"<br />

1/4"<br />

RBIT 540011<br />

Ogee with Fillet Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/2"<br />

3/16"<br />

1/4"<br />

RBIT 318411<br />

RBIT 318421<br />

1/4"<br />

3/16"<br />

1/4"<br />

RBIT 318011<br />

RBIT 318021<br />

Ball Bearing Classical Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/8"<br />

RBIT 322411<br />

1/2"<br />

3/16"<br />

1/4"<br />

RBIT 322421<br />

RBIT 322431<br />

5/16"<br />

RBIT 322441<br />

1/8"<br />

RBIT 322011<br />

1/4"<br />

3/16"<br />

RBIT 322021<br />

1/4"<br />

RBIT 322031<br />

Ball Bearing Cove Beading Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

3/16"<br />

RBIT 324411<br />

1/2"<br />

1/4"<br />

RBIT 324421<br />

5/16"<br />

RBIT 324431<br />

3/16"<br />

RBIT 324011<br />

1/4"<br />

1/4"<br />

5/16"<br />

RBIT 324021<br />

RBIT 324031<br />

3/8"<br />

RBIT 324031-1<br />

Half Round Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/2"<br />

RBIT 372431<br />

5/8"<br />

RBIT 372441<br />

3/4"<br />

RBIT 372451<br />

1/2"<br />

7/8"<br />

RBIT 372461<br />

1"<br />

RBIT 372471<br />

1-1/4"<br />

RBIT 372481<br />

1-1/2"<br />

RBIT 372491


Planing / Routering 71<br />

Hinge Boring Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

3/8"<br />

Blade size<br />

(A1)<br />

Part No.<br />

1-3/8" RBIT 56046<br />

Hinge Mortizing Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

1/4"<br />

Blade size<br />

(A1)<br />

Part No.<br />

1/2" RBIT 117011<br />

5/8" RBIT 117021<br />

Router bit set (3 pcs. set)<br />

• Straight bit - 1 Flute(D-49030),<br />

• Flush Trim bit - 2 Flutes(D-49270),<br />

• Roundover bit with Bearing(D-49769)<br />

Part No.<br />

D-53344<br />

Panel Raising Bit<br />

Material: TC (Tungsten Carbide)<br />

Packaging: Green plastic tube<br />

Shank size<br />

(D)<br />

Blade<br />

Part<br />

No.<br />

1/2" DC-903 406451<br />

Panel Raising Bit<br />

Shank size<br />

(D)<br />

Blade<br />

Part<br />

No.<br />

1/2" DC-901 406441<br />

Shank size<br />

(D)<br />

Blade<br />

Part<br />

No.<br />

1/2" DC-904 406461<br />

Shank size<br />

(D)<br />

Blade<br />

Part<br />

No.<br />

1/2" DC-902 406471<br />

Shank size<br />

(D)<br />

Blade<br />

Part<br />

No.<br />

1/2" DC-905 406421


72<br />

Planing / Routering<br />

HSS (High Speed Steel) Router Bit<br />

Material: HSS (Hidh Speed Steel)<br />

Packaging: Plastic Pouch<br />

Straight Bit<br />

Material: HSS (Hidh Speed Steel)<br />

Packaging: Plastic Pouch<br />

Roman Ogee Bit<br />

Material: HSS (Hidh Speed Steel)<br />

Packaging: Plastic Pouch<br />

Shank size<br />

(D)<br />

1/4"<br />

Blade size<br />

(A1)<br />

1/2"<br />

5/8"<br />

Part<br />

No.<br />

733234-2A<br />

733234-6A<br />

Shank size<br />

(D)<br />

1/4"<br />

Blade size<br />

(A1)<br />

1/4"<br />

Part<br />

No.<br />

733243-4A<br />

Core Box Bit<br />

Material: HSS (Hidh Speed Steel)<br />

Packaging: Plastic Pouch<br />

3/4"<br />

733234-8A<br />

Chamfering Bit<br />

Material: HSS (Hidh Speed Steel)<br />

Packaging: Plastic Pouch<br />

Shank size<br />

(D)<br />

1/4"<br />

Blade size<br />

(A1)<br />

1/4"<br />

Part<br />

No.<br />

733238-2A<br />

Shank size<br />

(D)<br />

1/4"<br />

Blade size<br />

(A1)<br />

1/4"<br />

Part<br />

No.<br />

733244-4A<br />

Corner Rounding Bit<br />

Material: HSS (Hidh Speed Steel)<br />

Packaging: Plastic Pouch<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part<br />

No.<br />

Straight guide assembly<br />

Straight guide with micro adjustment<br />

1/4"<br />

1/4"<br />

733240-2A<br />

Beading Bit<br />

Material: HSS (Hidh Speed Steel)<br />

Packaging: Plastic Pouch<br />

Shank size<br />

(D)<br />

1/4"<br />

Blade size<br />

(A1)<br />

1/8"<br />

3/8"<br />

Part<br />

No.<br />

733241-2A<br />

733242-0A<br />

Model No. Material Part No.<br />

3612BR, RP0900, RP0910, RP1110C,<br />

RF1100, RF1101, RD1100, RD110,<br />

RP1100, RP1101, RP1800/F, RP1801/F,<br />

RP2300FC, RP2301FC, ∗RT0700C<br />

∗DRT50, RP1800/F, RP181/F,<br />

RP2300FC, RP2301FC, RP0900,<br />

RP0910, RP1110C, ∗RT0700C<br />

Steel 193312-9<br />

Alumi<br />

w/o mark of<br />

origin<br />

195136-9<br />

Beading Bit<br />

Material: HSS (Hidh Speed Steel)<br />

Packaging: Plastic Pouch<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part<br />

No.<br />

1/4"<br />

1/8"<br />

3/8"<br />

733241-2A<br />

733242-0A<br />

Aluminum<br />

Steel<br />

Cove Bit<br />

Material: HSS (Hidh Speed Steel)<br />

Packaging: Plastic Pouch<br />

Shank size<br />

(D)<br />

Blade size<br />

(A1)<br />

Part<br />

No.<br />

1/4"<br />

733242-6A<br />

1/4"<br />

3/8"<br />

733242-8A<br />

1/2"<br />

733243-0A


Dust Extraction Attachment<br />

Impact drilling / Demolition<br />

Vacuum attachment<br />

Hammering only<br />

ø28mm hose can be directly connected.<br />

Dust extraction system set<br />

This system is designed to collect dust effectively with on-off operation of the tool’s<br />

on-off trigger switch interlocked with this system.<br />

73<br />

Model No.<br />

DHR242<br />

HR3011F<br />

HR001G, HR003G<br />

HR007G<br />

Dust extraction<br />

system set<br />

DX06<br />

DX10<br />

DX12<br />

DX15<br />

Part No.<br />

199561-6<br />

191F49-8<br />

191E52-3<br />

191X39-9<br />

Model No.<br />

DHR400, HM001G, HM002G,<br />

HR005G, HR006G, HM0871C,<br />

HM1111C, HM1201, HM1213C,<br />

HM1214C, HR4002, HR4013C,<br />

HR4030C,HR4511C, HR5212C, HR5202C<br />

With Vacuum<br />

hose set<br />

Without Vacuum<br />

hose set<br />

Without Vacuum<br />

hose set<br />

Part No.<br />

196571-4<br />

196568-3<br />

199143-4<br />

Dust cup set item<br />

+<br />

198362-9 194582-3<br />

Front cuffs 22<br />

P/N: 195547-8<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

195173-3<br />

Model No.<br />

Part No.<br />

DHR165, DHR171, HR140D, HR166D, HR1841F,<br />

HR2810, HR2460, HR2470, DHR241<br />

198362-9<br />

+<br />

194582-3<br />

DHR242, HR2651, HR002G, HR004G, HR3012FC<br />

195173-3<br />

Dust extractor attachment<br />

Model No.<br />

HM1306, HM1317C, HM1400,<br />

HM1801, HM1802,<br />

HM1810, HM1812<br />

With Vacuum<br />

hose set<br />

Without Vacuum<br />

hose set<br />

Part No.<br />

197148-8<br />

197168-2<br />

+<br />

Model No.<br />

Front cuffs 22<br />

P/N: 195547-8<br />

@ 168.00<br />

Part No.<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

Dust extractor attachment set<br />

SDS-max 40/45mm class vacuum attachment<br />

HR144D, HR166D, DHR165, DHR171,<br />

HR2020, HR2470, HR2810<br />

193472-7<br />

Dust collection wheel guard<br />

Drilling mode<br />

Hammering mode<br />

Model No.<br />

+<br />

Front cuffs 38<br />

P/N: 195545-2<br />

@ 480.00<br />

Part No.<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

TRIPLE NOTCH: DGA406, DGA418, GA4040C<br />

199294-3<br />

Model No.<br />

Part No.<br />

SINGLE NOTCH: 9553B. 9556HN, 9556HP, DGA402<br />

199295-1<br />

DHR400, HR005G, HR006G, HR4013C<br />

199014-5<br />

HR4002, HR4511C<br />

196074-8<br />

+<br />

Rubber sleeve<br />

P/N: 192202-3<br />

@ 168.00<br />

+<br />

Front cuffs 38<br />

P/N: 195545-2<br />

@ 480.00<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

Model No.<br />

Part No.<br />

N9500N, 9500NB<br />

192475-8


74<br />

Dust Extraction Attachment<br />

Planing / Routering<br />

Nozzle assembly<br />

Suction system and part no.<br />

(Non-clogging chip de ection in desired direction)<br />

Sawing<br />

Dust nozzle set<br />

Suction system and part no.<br />

Model No.<br />

Item<br />

+<br />

Front cuffs 22<br />

P/N: 195547-8<br />

@ 168.00<br />

Image<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

Part No.<br />

Model No.<br />

DKP180, KP0800<br />

Item<br />

Nozzle<br />

+<br />

Elbow<br />

(use with Nozzle)<br />

Front cuffs 38<br />

P/N: 195545-2<br />

@ 480.00<br />

Image<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

Part No.<br />

451329-1<br />

416368-8<br />

DSS611<br />

Model No.<br />

DHS710, DHS783<br />

Dust nozzle set<br />

Item<br />

+<br />

Dust nozzle set<br />

419283-5<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

Front cuffs 24 DVC665, DVC750L,<br />

P/N: 195546-0 / 424379-9 DVC155L, DVC157L<br />

@ 200.00 DVC860L, DVC864L<br />

Image<br />

Part No.<br />

196520-1<br />

DKP181<br />

1804N<br />

1805N<br />

Elbow<br />

Nozzle<br />

Nozzle<br />

416368-8<br />

STEX122198<br />

JPA122197<br />

Model No.<br />

Item<br />

+<br />

Front cuffs 38<br />

P/N: 195545-2<br />

@ 480.00<br />

Image<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

Part No.<br />

N1900B, N1923B<br />

1911B<br />

Hood set<br />

Outer dia. 76 mm<br />

Nozzle<br />

+<br />

Joint 55<br />

Nozzle<br />

+<br />

191569-5<br />

+<br />

JPA122275<br />

192082-7<br />

For inner dia. 76 mm<br />

Hose Vacuum Cleaner<br />

5008MG<br />

Model No.<br />

5008MG<br />

Dust nozzle set<br />

Item<br />

+<br />

Dust nozzle set<br />

Front cuffs 38<br />

P/N: 195545-2<br />

@ 480.00<br />

Image<br />

450079-5<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

Part No.<br />

450079-5<br />

Dust nozzle<br />

Image: DKP181<br />

Suction system and part no.<br />

Model No.<br />

Item<br />

+<br />

Model No.<br />

2012NB<br />

Front cuffs 38<br />

P/N: 195545-2<br />

@ 480.00<br />

Image<br />

Part No.<br />

193036-7<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

Part No.<br />

DJV182<br />

4350CT<br />

Model No.<br />

Item<br />

+<br />

Dust nozzle set<br />

Dust nozzle set<br />

Front cuffs 38<br />

P/N: 195545-2<br />

@ 480.00<br />

Image<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

Part No.<br />

126331-0<br />

417853-4<br />

RP0900<br />

** RT0700, DRT50<br />

use with Plunge<br />

base assembly<br />

RP0900<br />

** RT0700, DRT50<br />

use with Plunge<br />

base assembly<br />

Dust nozzle<br />

Dust nozzle<br />

194733-8<br />

194733-8<br />

Multi-tool<br />

Dust attachment set<br />

Suction system and part no.<br />

Model No.<br />

Item<br />

+<br />

Front cuffs 22<br />

P/N: 195547-8<br />

@ 168.00<br />

Image<br />

VC3210L, VC1310L<br />

DVC260, DVC261,<br />

DVC265, DVC660,<br />

DVC665, DVC750L,<br />

DVC155L, DVC157L<br />

DVC860L, DVC864L<br />

Part No.<br />

RP2301FC<br />

Dust nozzle<br />

194934-8<br />

DTM50<br />

Dust<br />

attachment<br />

set<br />

199621-4<br />

3612BR<br />

Dust nozzle<br />

192035-6<br />

TM3000C<br />

Dust<br />

attachment<br />

set<br />

199618-3


75<br />

ACCESSORIES<br />

Outdoor Power Equipment


76<br />

Outdoor Power Equipment<br />

Blade selection guide<br />

For short grass For tall grass For bush<br />

2-tooth, 3-tooth, 4-tooth, 8-tooth<br />

*For cutting thick grass,<br />

*Suitable for cutting wide space<br />

80-tooth<br />

*For trimming bush, thick grass and etc.<br />

TCT<br />

*Adopted TCT tips. *For thick grass<br />

Brushcutter blades<br />

Hole Dia.: 25.4mm<br />

Packaging: Clamp shell<br />

230 x 25.4 x 2T<br />

Blade dia./<br />

No. of teeth<br />

Thickness For model no. Part No.<br />

230mm / 2 2.0mm<br />

RBC411U, EBH340U,<br />

EM3400U<br />

UR101C / UR201C<br />

DUR361U, DUR182U<br />

BC231UD<br />

D-66064<br />

255 x 25.4 x 4T<br />

Blade dia./<br />

No. of teeth<br />

Thickness For model no. Part No.<br />

255mm / 4 2.0mm<br />

RBC411U, EBH340U,<br />

EM3400U<br />

UR101C / UR201C<br />

DUR361U, DUR182U<br />

DUR191U, BC231UD<br />

D-66014<br />

257 x 25.4 x 3T<br />

Blade dia./<br />

No. of teeth<br />

Thickness For model no. Part No.<br />

257mm / 3 2.0mm<br />

RBC411U, EBH340U,<br />

EM3400U<br />

UR101C / UR201C<br />

DUR361U, DUR182U<br />

DUR191U, BC231UD<br />

D-66036<br />

250 x 25.4 x 3T<br />

Blade dia./<br />

No. of teeth<br />

Thickness For model no. Part No.<br />

250mm / 40 2.0mm<br />

RBC411U, EBH340U,<br />

EM3400U<br />

UR101C / UR201C<br />

DUR361U, DUR182U<br />

DUR191U, BC231UD<br />

A-56932<br />

String trimmer head / Nylon cord set / Nylon cutting head<br />

(for grass, light weeds)<br />

Packaging: Poly bag with headers<br />

Bump and Feed<br />

Arbore<br />

size<br />

Size For model no. Part No.<br />

EM2500U<br />

M8 x 1.25LH<br />

4"<br />

DUR182U<br />

DUR187U<br />

(2.0mm x 4m)<br />

DUR191U<br />

DUR361U<br />

191D91-7<br />

Bump and Feed<br />

Arbore<br />

size<br />

M10 x 1.25LH<br />

Size<br />

4"<br />

(2.4mm x 3m)<br />

For model no.<br />

BC231UD<br />

UR101C, UR201C<br />

RBC411U, EBH340U<br />

EM3400U, EM403MP<br />

Part No.<br />

191D90-9<br />

Bump and Feed<br />

Arbore<br />

size<br />

M8 x 1.25LH<br />

Size<br />

4" Low<br />

Pro le<br />

(2.0mm x 3m)<br />

For model no.<br />

EM2500U<br />

DUR182U<br />

DUR187U<br />

DUR191U<br />

DUR361U<br />

Part No.<br />

196589-5<br />

Bump and Feed<br />

Arbore<br />

size<br />

Size For model no. Part No.<br />

BC231UD<br />

4"<br />

UR101C, UR201C<br />

M10 x 1.25LH 197804-0<br />

(2.4mm x 3m) RBC411U, EBH340U<br />

EM3400U, EM403MP


Accessories<br />

Nylon cutting head (Fixed)<br />

Packaging: Paper box<br />

Pole hedge trimmer<br />

Overall length: 1,624mm (62")<br />

77<br />

Fixed<br />

Size For model no. Part No.<br />

5"<br />

All model<br />

B-02951<br />

Four-leaf clover-like cross section<br />

(2.0mm x 15 meters - single layer)<br />

Model No.<br />

EN401MP<br />

Shaft extension attachment<br />

For Pole saw, Pole hedge trimmer<br />

and Coffee harvester<br />

Length: 1,066mm (42")<br />

Part No.<br />

196341-1<br />

Color & shape<br />

Spiral cord body<br />

Size Color Part No.<br />

5" Green E-01769<br />

Model No.<br />

LE400MP<br />

Part No.<br />

191E23-0<br />

Multi Function Power Head Attachments<br />

For UX01G / DUX60 / DUX18<br />

Blower attachment<br />

Blowing force: 0 - 13.1N<br />

Model No.<br />

UB400MP<br />

Part No.<br />

191F68-4<br />

UX01G DUX60 DUX18<br />

Model No.<br />

UB401MP<br />

Part No.<br />

191P75-7<br />

Rotary scissors<br />

Cutting width 230 mm (9")<br />

Cultivator<br />

Cultivating width: 160mm<br />

Model No.<br />

EM407MP<br />

Part No.<br />

191M57-1<br />

Model No.<br />

KR401MP<br />

Part No.<br />

199185-8<br />

Brushcutter<br />

Cutting width: 450mm<br />

Spindle size: M10 x 1.25LH<br />

PARTS needed for<br />

attaching metal blade:<br />

1 pc. Cup PN: 346406-1<br />

1 pc. Nut M10 PN: 264052-7<br />

Power brush<br />

String timmer<br />

Cutting width: 410mm<br />

Spindle size: M8 x 1.25RH<br />

Model No.<br />

EM403MP<br />

UX01G / DUX60 ONLY<br />

EM408MP<br />

EM409MP<br />

(Nylon Head Only)<br />

Part No.<br />

198767-3<br />

191N34-9<br />

191N46-2<br />

Power sweep<br />

Model No.<br />

BR400MP<br />

Part No.<br />

199323-2<br />

NOT RECOMMENDED FOR USE<br />

WITH METAL BLADE<br />

Model No.<br />

ER400MP<br />

Part No.<br />

195528-2<br />

Model No.<br />

SW400MP<br />

Part No.<br />

199344-4<br />

Pole saw<br />

Cutting length: 1,145 mm (45")<br />

Rotary scissors set E<br />

Cutting width 230 mm (9")<br />

Chain speed:<br />

High: 1,200m/min.<br />

Medium: 1,020m/min.<br />

Low: 720m/min.<br />

Model No.<br />

EY401MP (10")<br />

EY403MP (12")<br />

Part No.<br />

199925-4<br />

191T39-5<br />

For Model<br />

UR006G<br />

UR101C<br />

UR201C<br />

Part No.<br />

191M75-9


78<br />

Accessories<br />

Conversion from Grass Shear to Hedge Trimmer<br />

Shape<br />

Part No.<br />

Variospray lance set<br />

197876-5<br />

Cyclone jet nozzle set<br />

Hedge Trimmer Blade<br />

DUM604, UM600D<br />

Shape<br />

Part No.<br />

197824-4<br />

198408-1<br />

Under body spray lance set<br />

Blade Cover for (198408-1)<br />

DUM604, UM600D<br />

198909-9 /<br />

197859-5<br />

451816-0<br />

Extension pipe set<br />

(0.9m / 1.3m / 1.7m)<br />

197870-7<br />

Chip Receiver for (198408-1 & 191N24-2)<br />

DUM604, UM600D, UM110D<br />

198401-5<br />

Rotating brush set<br />

197831-7<br />

Hedge Trimmer Blade<br />

UM110D<br />

191N24-2<br />

Foam nozzle set<br />

197886-2<br />

Long Handle Attachment<br />

DUM604, UM600D, UM110D<br />

198486-1<br />

High pressure extension hose<br />

5m<br />

197845-6<br />

8m<br />

197847-2<br />

Shear Blade Assembly 200 Set<br />

DUM604, UM600D<br />

Twist prevention joint set<br />

10m<br />

197850-3<br />

195267-4<br />

197867-6<br />

Shear Blade Assembly 110 Set<br />

UM110D<br />

191N23-4<br />

Self-suction hose set<br />

197873-1<br />

<strong>Accessory</strong> joint set<br />

Power washer accessories for<br />

DHW080, HW1200, & HW1300<br />

197853-7<br />

Trigger gun set<br />

Shape<br />

Part No.<br />

Absorption connector set<br />

197842-2<br />

197881-2<br />

Variable nozzle set<br />

Connector set<br />

197822-8<br />

197935-5


<strong>Makita</strong> - A Global Brand<br />

<strong>Makita</strong> have established directly operated business bases in about 50 countries around the world, and have upgraded<br />

our sales network in over 170 countries and after-sales service capabilities to become one of the leading companies in<br />

our industry. In addition, <strong>Makita</strong> is producing power tools in plants in China, U.S.A., U.K., Germany, Brazil, Romania and<br />

Thailand. Currently, about 90% of our group’s manufacturing work in terms of production volume is carried out overseas.<br />

<strong>Makita</strong>’s worldwide sales and service network, as well as the stable, high production quality ensured at its plants<br />

worldwide, are the embodiment of the <strong>Makita</strong> brand.<br />

NORTH<br />

AMERICA<br />

4 companies<br />

EUROPE<br />

27 companies<br />

The Middle East<br />

and Africa<br />

2 companies<br />

No. of Sales and Service Bases<br />

308 bases<br />

ASIA<br />

10 companies<br />

JAPAN<br />

19 companies<br />

116 sales office<br />

Sales Office opened in April 2019.<br />

Sales and Service Bases<br />

Production Bases<br />

Central and<br />

South America<br />

6 companies<br />

Oceania<br />

2 companies<br />

JAPAN<br />

JAPAN U.S.A. UNITED KINGDOM<br />

Okazaki Plant<br />

<strong>Makita</strong> Corporation Headquarters <strong>Makita</strong> Corporation of America <strong>Makita</strong> Manufacturing Europe Ltd.<br />

ROMANIA<br />

SC <strong>Makita</strong> EU SRL<br />

GERMANY<br />

<strong>Makita</strong> Engineering Germany<br />

BRAZIL<br />

<strong>Makita</strong> do Brasil Ferramentas<br />

Elétricas Ltda.<br />

CHINA<br />

<strong>Makita</strong> (China) Co., Ltd.<br />

CHINA<br />

<strong>Makita</strong> (Kunshan) Co., Ltd.<br />

THAILAND<br />

<strong>Makita</strong> Manufacturing<br />

(Thailand) Co., Ltd.


A c c e s s o r y C a t a l o g u e<br />

www.makita.com<br />

PRINTED IN JAPAN Z11211-2 TSFHAA-201912

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!