TQi ADVANCED TUNING GUIDE

Recommendations

Info

TQi ADVANCED TUNING GUIDEMENU TREEThe menu tree below shows how to navigate throughthe TQi transmitter’s various settings and functions.Press and hold MENU to enter the menu tree, and usethe following commands to navigate through themenu and select options.MENU: When you enter a menu, you always start atthe top. Press MENU to move down the menutree. When you reach the bottom of the tree,pressing MENU again will return you to the top.SET:BACK:EXIT:ECHO:Press SET to move across the menu tree andselect options. When an option is committedto the transmitter’s memory, the status LED willrapidly blink green.Press both MENU and SET to go back one levelin the menu tree.Press and hold MENU to exit programming. Yourselected options will be saved.Press and hold SET to activate the “echo”function. Echo will “play back” your currentposition on the Menu Tree, should you lose yourplace. For example: If your current position isSteering Channel End Points, holding SET willcause the LED to blink green twice, green once,and then red three times. Echo will not alteryour adjustments or change your position inthe programming sequence.Below is an example of how to access a function in the menutree. In the example, the user is setting the Multi-Function knobto be a Steering % (Dual Rate) control.To set the Multi-Function knob to control STEERING % (DUAL RATE):1. Switch the transmitter on2. Press and hold MENU until the green LED lights. It will blink in singleintervals.3. Press SET. The red LED will blink in single intervals to indicate SteeringSensitivity (Expo) has been selected.4. Press MENU twice. The red LED will blink three times repeatedly toindicate Steering % (Dual Rate) has been selected.5. Press SET to select. The green LED will blink 8 times fast to indicatesuccessful selection.6. Press and hold MENU to return to driving mode.Enter ProgrammingPress and holdMENU for 3 seconds1PressMENU2PressMENU3PressMENU4Multi-Function KnobOne Blink GreenChannel SetupTwo Blinks GreenMode SelectionThree Blinks GreenTraxxas LinkFour Blinks Green*Torque Control is a feature designed only for use with the power system in the Traxxas Funny Car Race Replica (Model #6907).PressSETPressSETPressMENUPressSETPressSETPress MENU to move through options.Press SET to select an option.1 Steering Sensitivity (Expo)One Blink Red2345678123Steering (Channel 1)One Blink GreenPress SET to select an option.1 ElectricOne Blink RedPressMENU21PressMENU2Throttle Sensitivity (Expo)Two Blinks RedSteering % (Dual Rate)Three Blinks RedBraking %Four Blinks RedThrottle TrimFive Blinks RedKnob DisabledSix Blinks RedTorque Control*Seven Blinks RedTSMEight Blinks RedThrottle (Channel 2)Two Blinks GreenShift (Channel 3)Three Blinks GreenNitroTwo Blinks RedModel LockingOne Blink GreenDelete ModelTwo Blinks GreenPressSETPressSETPressSETPressSETPressSETNote: The transmitter is “live” during programmingso you can test the settings real time without havingto exit the menu tree.Press MENU to move through options.Press SET to select an option.1241211231Servo ReversingOne Blink RedSub-TrimTwo Blinks RedReset End PointsFour Blinks RedServo ReversingOne Blink RedSub-TrimTwo Blinks RedServo ReversingOne Blink RedUnlockOne Blink RedLockTwo Blinks RedUnlock AllThree Blinks RedConfirm DeletionOne Blink RedPress SET to reverseservo direction.Use knob to adjustsub-trim. Press SET to save.3 End Points Use steering wheel toThree Blinks Redadjust. Turn right to desiredend point, press set to save.Turn left to desired endpoint and press set to save.To reset max throw: Let go of controls and press SET.Press SET to restorefactory default endpoints.Press SET to reverseservo direction.Use knob to adjust subtrim.Press SET to save.3 End Points Use trigger to adjust. PullThree Blinks Redback to desired end point,press set to save. Pushforward to desired endpoint and press set to save.To reset max throw: Let go of controls and press SET.4 Reset End Points Press SET to restoreFour Blinks Red factory default endpoints.
Set Multi-Functionknob for STEERINGSENSITIVITY (Expo)Press/hold MENUgreen LED blinksPress SETred LED blinksx8Press SET to confirmgreen LED blinks (x8)Press/hold MENUreturns to driving modeSet Multi-Functionknob for THROTTLESENSITIVITY (Expo)Set Multi-Functionknob for STEERINGDUAL RATE (%)Set Multi-Functionknob for BRAKINGPERCENTAGE (%)Press/hold MENUgreen LED blinksPress/hold MENUgreen LED blinksPress/hold MENUgreen LED blinksPress SETred LED blinksPress SETred LED blinksPress SETred LED blinksx2Press MENU to confirmred LED blinks (x2)x3Press MENU twicered LED blinks (x3)x4Press MENU 3 timesred LED blinks (x4)x8Press SET to selectgreen LED blinks (x8)x8Press SET to selectgreen LED blinks (x8)x8Press SET to selectgreen LED blinks (x8)Press/hold MENUreturns to driving modePress/hold MENUreturns to driving modePress/hold MENUreturns to driving modeMENU TREE FORMULASTo select functions and make adjustments to the TQi transmitter withoutreferencing the menu tree, turn your transmitter on, find the function in theleft column you wish to adjust, and simply follow the corresponding steps.1Set Multi-Functionknob forTHROTTLE TRIMTo LOCK theMulti-Function knobPress/hold MENUgreen LED blinksPress/hold MENUgreen LED blinksPress SETred LED blinksPress SETred LED blinksx5Press MENU 4 timesred LED blinks (x5)x6Press MENU 5 timesred LED blinks (x6)x8Press SET to selectgreen LED blinks (x8)x8Press SET to lockgreen LED blinks (x8)Press/hold MENUreturns to driving modePress/hold MENUreturns to driving modeAdjust the Multi-Function knob until theLED turns solid green.Always turn yourtransmitter on first.To REVERSE thedirection ofSTEERING servoPress/hold MENUgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETgreen LED blinksPress SETred LED blinksx8Press SET to reverseservo directionPress/hold MENUreturns to driving modeTo set the SUB TRIMof the STEERINGservoPress/hold MENUgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETgreen LED blinksPress SETred LED blinksx2Press MENUred LED blinks (x2)Use Multi-Functionknob to set neutralx8Press SETto save positionPress/hold MENUreturns to driving modeTo set the ENDPOINTS of theSTEERING servoPress/hold MENUgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETgreen LED blinksPress SETred LED blinksx3Press MENU twicered LED blinks (x3)Turn steeringwheel to desired maxleft and right travelx8Press SETto save each positionTurn steering wheelto test settingsIF END POINTSARE OK:Press/hold MENUreturns to driving modeIF END POINTSNEED TO BECHANGED:Press SETand repeat steps 6-8To reset the ENDPOINTS of STEERINGservo to defaultsPress/hold MENUgreen LED blinksx2Press MENUred LED blinks (x2)Press SETgreen LED blinksPress SETred LED blinksx4Press MENU 3 timesred LED blinks (x4)x8Press SETto reset end pointsPress/hold MENUreturns to driving modeTo REVERSE thedirection ofTHROTTLE servoPress/hold MENUgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETred LED blinksx8Press SET to reverseservo directionPress/hold MENUreturns to driving modeTo set the SUB TRIMof the THROTTLEservoPress/hold MENUgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETred LED blinksx2Press MENUred LED blinks (x2)Use Multi-Functionknob to set neutralx8Press SETto save positionPress/hold MENUreturns to driving modeTo set the ENDPOINTS of theTHROTTLE servoPress/hold MENUgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETred LED blinksx3Press MENU twicered LED blinks (x3)Use throttletrigger to set desiredmax throttle or brakePress SET to saveUse trigger to testIF END POINTSARE OK:Press/hold MENUreturns to driving modeIF END POINTSNEED TO BECHANGED:Press SETand repeat steps 7-9To reset the ENDPOINTS of THROTTLEservo to defaultsPress/hold MENUgreen LED blinksx2Press MENUred LED blinks (x2)Press SETgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETred LED blinksx4Press MENU 3 timesred LED blinks (x4)x8Press SETgreen LED blinks (x8)Press/hold MENUreturns to driving modeTo REVERSE thedirection of SHIFTservoPress/hold MENUgreen LED blinksx2Press MENUgreen LED blinks (x2)Press SETgreen LED blinksx3Press MENU twicegreen LED blinks (x3)Press SETred LED blinksx8Press SET to reverseservo directionPress/hold MENUreturns to driving modeREVO 3.3 • 47
Page 1 and 2: owner ’ s manualMODEL 53097-3
Page 3 and 4: BEFORE YOU PROCEEDCarefully read an
Page 5 and 6: Made in ChinaSP 1361-R 0TOOLS, SUPP
Page 7 and 8: QUICK START: GETTING UP TO SPEEDThe
Page 9 and 10: TRAXXAS TQi RADIO SYSTEMYour Revo i
Page 11 and 12: BATTERY CARESome precautions should
Page 13 and 14: TRAXXAS TQi RADIO SYSTEM3. Walk awa
Page 15 and 16: THE TRX 3.3 RACING ENGINE INTRODUCT
Page 17 and 18: THE TRX 3.3 RACING ENGINETERMS TO K
Page 19 and 20: THE TRX 3.3 RACING ENGINETHE FUELUs
Page 21 and 22: THE TRX 3.3 RACING ENGINETHE CARBUR
Page 23 and 24: THE TRX 3.3 RACING ENGINEInstalling
Page 25 and 26: THE TRX 3.3 RACING ENGINETank 11. D
Page 27 and 28: THE TRX 3.3 RACING ENGINEBefore you
Page 29 and 30: DRIVING YOUR REVOINTRODUCTIONYour T
Page 31 and 32: BASIC TUNING ADJUSTMENTSpush rod co
Page 33 and 34: BASIC TUNING ADJUSTMENTSMaximum Ali
Page 35 and 36: BASIC TUNING ADJUSTMENTS2. Adjust b
Page 37 and 38: MAINTAINING AND STORING YOUR REVO3.
Page 39 and 40: ADVANCED TUNING ADJUSTMENTSRocker A
Page 41 and 42: ADVANCED TUNING ADJUSTMENTSThe foll
Page 43 and 44: TQi ADVANCED TUNING GUIDEAvailable
Page 45: TQi ADVANCED TUNING GUIDETRAXXAS LI

KC2784-R01-53097-3-Revo33-Owners

Transform your PDFs into Flipbooks and boost your revenue!

KC2784-R01-53097-3-Revo33-Owners

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?