KC2784-R01-53097-3-Revo33-Owners

QUICK START: GETTING UP TO SPEED
The following guide is an overview of the procedures for getting your Revo running, from opening the box to breaking in and tuning your
engine. Refer to the pages indicated for details on each step. Look for the Quick Start logo on the bottom corners of Quick Start pages.
1. Read the safety precautions on page 4 9. Fill the fuel tank • See page 20
For your own safety, understand where carelessness and misuse could Use your fuel-dispensing bottle to fill the tank.
lead to personal injury.
2. Charge the EZ-Start battery pack • See page 23 10. Connect the EZ-Start to the model • See page 23
The EZ-Start requires a fully charged 7.2-volt battery pack (included). Learn the proper way to use the EZ-Start electric starting system.
The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your Revo.
3. Charge the RX Power Pack • See page 10 11. Start the engine • See page 24
The 5-cell receiver battery is already installed in the truck. Learn to use the correct starting procedure for your TRX 3.3.
4. Install batteries in the transmitter • See page 10 12. Break-in your engine • See page 24-25
Revo requires 4 AA alkaline batteries for the transmitter
(sold separately).
Follow the break-in instructions exactly to ensure the
best-performing, longest-lasting engine.
5. Install the EZ-Start battery • See page 23 13. Tune your engine • See page 26
Install and connect a charged 7.2-volt battery pack in
the EZ-Start controller.
Learn how to set the fuel mixture needles for optimum
engine performance.
6. Turn on the radio system • See page 11 14. Drive your Revo • See page 29
Make a habit of turning the transmitter on first, and off last.
Learn to use the two-speed function on your truck, along
with important driving precautions.
7. Check servo operation • See page 12 15. Maintain your Truck • See pages 36-37
Make sure the throttle, shifting, and steering servos are
working correctly.
Follow these critical steps to maintain the performance of your
Revo and keep it in excellent running condition.
8. Range test the radio system • See page 13
Follow this procedure to make sure your radio system works properly at
a distance and that there is no interference from outside sources.
Look for the Quick Start
logo at the bottom of
Quick Start pages.
REVO 3.3 • 7