OPENING/CLOSING ENGINE ACCESS COVERS MAINTENANCE WARNING: • Do not keep the engine access covers open when the machine is parked on a slope, or while the wind is blowing hard. The engine access covers may close accidentally, possibly resulting in personal injury. • When opening/closing the engine access covers, take care not to allow your fingers to be become pinched with the covers. Pull up latch (2) to open cover (1). The cover is raised by link mechanism (3). Be sure to fully raise the cover. After checking that stopper (4) provided on the left link is placed in LOCK position (5), remove your hand from the cover. Cover (1) will be locked in place. When closing cover (1), while raising cover (1), push stopper (4) at the arrowed position � to disengage the lock. While pushing stopper (4), lower the cover. When the cover is lowered by the 1/4 stroke, leave stopper (4). Then, lower cover (1) further to completely close it. Be sure to completely remove your hand, which is pushing stopper (4), out of cover (1) at this time. Failure to do so may cause your hand to be caught with cover (1), possibly resulting in severe injury. 7-4 3 4 5 1 Lock Position 4 5 2 M1M7-07-008 M1M7-07-009 M1M7-07-010 M1M7-07-069
OPENING/CLOSING TANK COVERS MAINTENANCE WARNING: • Do not keep the tank cover open when the machine is parked on a slope, or while the wind is blowing hard. The tank cover may close accidentally, possibly resulting in personal injury. • When opening/closing the tank cover, take care not to allow your fingers to be pinched with the cover. 1. Press button (2) and raise cover (1) to open cover (1). Cover (1) will be stopped opening with wire (3). 2. Take stopper (4) out of holder (5). Install stopper (4) into lock hollow (6). Cover (1) is held in position. 3. When closing cover (1), follow the reverse order of the above procedure. WARNING: After closing cover (1), check that it is locked securely. NOTE: Button (2) can be locked with key (7). 7-5 2 3 Unlock Position 7 2 6 1 Lock Position 5 4 M1M0-07-001 2 M1MF-07-030 1 M1M7-07-001 7
Launched in 1980, Construction Plant World Journal is published every two weeks, read by a worldwide audience of buyers and sellers of construction plant and equipment industries.
In conjuction with www.ConstructionPlantWorld.com, we offer sellers the most comprehensive, effective and easy to use solution to reach potential buyers globally.