Views
5 years ago

0712-0299ZX60USB-3 - Flannery Plant Hire

0712-0299ZX60USB-3 - Flannery Plant Hire

Bucket and Link Pins ---

Bucket and Link Pins --- every 100 hours Grease all submerged pins after operating in water. Blade Pins --- every 500 hours or every year • Blade connecting pin • Blade cylinder rod end and bottom MAINTENANCE Precautions for Front Attachment and Blade Removal 1. When pins are removed to replace the front attachment or blade, do not attempt to clean the bore insides of the bushings. 2. Before installing the front attachment or the blade, apply grease sufficiently to the pin-boss ends or the dust seals of the cylinders. 3. Be sure to install at least one shim on both sides of front joint pins. 4. When the swing post is disassembled, coat the pins and the thrust plates with grease before reinstalling them. 7-18 M503-07-092 M1M0-07-037

Swing Bearing --- every 250 hours MAINTENANCE CAUTION: Before lubricating the swing bearing, lower the bucket and the blade to the ground, stop the engine, and place the pilot control shut-off lever to the LOCK position. Lubrication and rotation of the upperstructure must be done by one person only. Be sure to check that no personnel are present around the machine before starting to work. Grease via grease fitting. 1. Lower the bucket and the blade to the ground, stop the engine, and place the pilot control shut-off lever to the LOCK position. Add grease with a grease gun by two to three strokes. Lower the bucket and blade to the ground. 2. Raise the bucket approx. 200 mm (8 in) above the ground. While rotating the upperstructure, add grease in 8 places at approximately every 90° interval until the upperstructure is made two turns. 7-19 M1M7-07-025

Neuson Zero-Tail Swing Excavator 50Z3/6003 - Chase Plant Hire
Ridgway Rentals Plant Machinery Guide May 17
Get inspired by - Green Design Plant Hire
3. Fusarium mycotoxins in cereals - Plant Research International ...
4878 JS200W Spec (Iss2) (UK) - Flannery Plant Hire
Quick Coupler Safety Quick Coupler Safety - Flannery Plant Hire
s130 skid-steer loader specifications - Ringby Plant Hire Ltd
MINIMIX 150 - Rapid Plant and Tool Hire
New Copy of Stock List Hire Rates - Baileys Plant Hire Ltd
ALR 900 | AVR 1100 - PSM PLANT & TOOL HIRE CENTRES LTD
Pacific Coast Canola Begins Hiring for New Plant - Legumex Walker ...
Hiring cell gatekeepers - ABC transporters in plant ... - BioTechnologia
15. LOADERS - CPHA - Contractors Plant Hire Association
JCB TRACKED EXCAVATOR | JS130 L T.A.B. - Exuma Plant Hire
Atlas Copco Portable air compressors Series 7, - Plant Hire UK Limited
CES 3 2011 Hire of Plant SCHEDULES - Drakenstein municipality
Hilti - TE15-C - Light Duty Electric Breaker - Exsel Plant & Tool Hire Ltd
Forms 3 More Form Controls - Portia Plante