Views
5 years ago

0712-0299ZX60USB-3 - Flannery Plant Hire

0712-0299ZX60USB-3 - Flannery Plant Hire

C. TRANSMISSION Travel

C. TRANSMISSION Travel Reduction Gear MAINTENANCE WARNING: • Each component of the travel reduction gear may be hot just after operation. Allow components to cool before starting work. • The travel reduction gear may be pressurized. Be sure to release the internal pressure by slowly loosen the air bleed plug two to three turns before removing the plug. Failure to do so may cause the plug and/or gear oil to fly out, possibly resulting in personal injury. Keep body and face away from the air bleed plug. Check Oil Level --- every 250 hours 1. Park the machine on a level surface. 2. Rotate the travel motor until plugs are positioned as illustrated on the right. Stop the engine. 3. Slowly loosen plug (1) to release pressure. 4. Remove plugs (1 and 2). Check that oil flows out of the thread hole for plug (2). If no oil flows out, add oil until oil flows out of the plughole. 5. After cleaning plugs (1 and 2), install the plugs (1 and 2). Tightening torque: 22 to 24 N⋅m (2.2 to 2.4 kgf⋅m, 16 to 18 lbf⋅ft). 7-24 1 2 M503-07-015 1 2 M585-07-080

MAINTENANCE Change Gear Oil --- every 1000 hours (first time after 250 hours) 1. Park the machine on a level surface. 2. Rotate the travel motor until plugs are positioned as illustrated on the right. Stop the engine. 3. Slowly loosen plug (1) to release pressure. 4. Remove drain plug (3) and plug (1) to drain oil. 5. After draining oil completely, clean plug (3). Install plug (3). Tightening torque: 22 to 24 N⋅m (2.2 to 2.4 kgf⋅m, 16 to 18 lbf⋅ft). 6. Supply oil through the thread hole for plug (1). NOTE: Refer to the recommended oil and grease chart on page 7-10 for the brand names of oils. 7. Remove plug (2). Add oil until oil flows out of the tread hole for plug (2). Oil Quantity: 0.9 L (0.95 US qt) 8. After cleaning plugs (1 and 2), reinstall the plugs. Tightening torque: 22 to 24 N⋅m (2.2 to 2.4 kgf⋅m, 16 to 18 lbf⋅ft). 7-25 1 2 3 M585-07-080

Neuson Zero-Tail Swing Excavator 50Z3/6003 - Chase Plant Hire
Get inspired by - Green Design Plant Hire
Ridgway Rentals Plant Machinery Guide May 17
3. Fusarium mycotoxins in cereals - Plant Research International ...
Quick Coupler Safety Quick Coupler Safety - Flannery Plant Hire
4878 JS200W Spec (Iss2) (UK) - Flannery Plant Hire
s130 skid-steer loader specifications - Ringby Plant Hire Ltd
MINIMIX 150 - Rapid Plant and Tool Hire
ALR 900 | AVR 1100 - PSM PLANT & TOOL HIRE CENTRES LTD
Hiring cell gatekeepers - ABC transporters in plant ... - BioTechnologia
15. LOADERS - CPHA - Contractors Plant Hire Association
New Copy of Stock List Hire Rates - Baileys Plant Hire Ltd
Pacific Coast Canola Begins Hiring for New Plant - Legumex Walker ...
JCB TRACKED EXCAVATOR | JS130 L T.A.B. - Exuma Plant Hire
CES 3 2011 Hire of Plant SCHEDULES - Drakenstein municipality
Hilti - TE15-C - Light Duty Electric Breaker - Exsel Plant & Tool Hire Ltd
Atlas Copco Portable air compressors Series 7, - Plant Hire UK Limited