Views
5 years ago

0712-0299ZX60USB-3 - Flannery Plant Hire

0712-0299ZX60USB-3 - Flannery Plant Hire

Check Water Separator

Check Water Separator --- daily When water is accumulated in water separator (2), Loosen drain plug (3) to drain water and sediment. If water is difficult to drain, loosen air bleed plug (4). Drain Fuel Tank Sump --- as required MAINTENANCE Park the machine on a solid level surface. Loosen bolts (5) to remove drain valve cover (6) from right-front cover (7). Rotate drain valve cover (6) to open the checking port. Open drain valve (1) on the bottom of the fuel tank and allow the water and sediments to drain from the fuel tank sump. 7-42 1 5 6 7 4 2 3 M1M0-07-009 M1M0-07-010 M1M0-07-011

Replace Fuel Filter --- every 500 hours MAINTENANCE 1. Close stop valve (1). 2. Remove fuel filter (2) with a fuel filter wrench. 3. Clean the mounting surface for fuel filter (2). 4. Install new fuel filter (2) while rotating the fuel filter clockwise until the fuel filter comes in contact with the mounting surface. Tighten the fuel filter about 1/2 turns more using the filter wrench. NOTE: Tightening torque: 12 to 16 N⋅m (1.2 to 1.6 kgf⋅m, 9 to 12 lbf⋅ft) 5. Open stop valve (1). 6. Turn the key switch ON and hold for 10 to 15 seconds. 7. Start the engine and check the fuel system for fuel leaks. IMPORTANT: Be sure to use only genuine fuel filter. Failure to use genuine parts or replace fuel filter, the engine may be damaged. 7-43 2 Loosen Tighten 1 M1M0-07-012 M1M0-00-003

colour - Green Design Plant Hire
Ridgway Rentals Plant Machinery Guide May 17
WARNING - Flannery Plant Hire
Untitled - Flannery Plant Hire
Untitled - Flannery Plant Hire
Untitled - Flannery Plant Hire
Untitled - Flannery Plant Hire
Untitled - Flannery Plant Hire
GP.SERVICES - Sonic Plant Hire
MINIMIX 150 - Rapid Plant and Tool Hire
EC13 - Plant Hire UK Limited
Ec13 - Plant Hire UK Limited
plant list - Belmont Engineering
8457 JS145HD Spec (UK) Issue 3