0712-0299ZX60USB-3 - Flannery Plant Hire
Clean Radiator and Oil Cooler Core --- every 500 hours MAINTENANCE CAUTION: Always wear safety glasses or goggles when using compressed air [less than 0.2 MPa (2 kgf/cm 2 , 29 psi)] to clean radiator core. IMPORTANT: • Cover air cleaner inlet opening to prevent entry of dust and water while cleaning the radiator. • High-pressure air [less than 0.2 MPa (2 kgf/cm 2 , 29 psi)] or water can damage radiator fins. Keep the pressure nozzle 500 mm (20 in) or more away from the core face. The radiator and the oil cooler are arranged in parallel. In case dust or dirt should become stuck to the radiator core, clean the radiator with compressed air and/or water to maintain the cooling ability of the cooling system. Clean Air Conditioner Condenser --- every 500 hours Clean Air Conditioner Front Screen --- every 500 hours 7-50
H. ELECTRICAL SYSTEM MAINTENANCE IMPORTANT: • Improper radio communication equipment and associated parts, and/or improper installation of radio communication equipment effects the machine’s electronic parts, causing involuntary movement of the machine. Also, improper installation of electrical equipment’s may cause machine failure and/or a fire on the machine. Be sure to consult your authorized dealer when installing s radio communication equipment or additional electrical parts, or when replacing electrical parts. • Never attempt to disassemble or modify the electrical/electronic components. If replacement is required, consult your authorized dealer. Battery WARNING: Battery generates explosive gas during operation or charge. Keep sparks and flames away from battery. Do not continue to use or charge the battery when the electrolyte level is lower than specified. Explosion of the battery may result. Charge battery in a well-ventilated area. Sulfuric acid in battery electrolyte is poisonous. It is strong enough to burn skin, eat holes in clothing, and cause blindness if splashed into eyes. IMPORTANT: If the battery is used with the electrolyte level lower than the specified low level, the battery may deteriorate quickly. IMPORTANT: Do not refill electrolyte more than the specified upper level. Electrolyte may spill, damaging the painted surfaces and/or corroding other machine parts. NOTE: In case electrolyte is refilled more than the specified upper level line or beyond the bottom end of the sleeve, remove the excess electrolyte until the electrolyte level is down to the bottom end of the sleeve using a pipette. After neutralizing the removed electrolyte with sodium bicarbonate (Baking powder), flush with plenty of water, otherwise, consult the battery manufacturer. 7-51 SA-032 SA-036
INDEX MACHINE NUMBERS SAFETY SAFETY
SWING MOTOR TYPE: MFG. NO.: HYDRAUL
Starting the Engine in Cold Weather
MEMO CONTENTS .....................
FOLLOW SAFETY INSTRUCTIONS SAFETY
TIDY UP INSIDE OPERATOR’S SPACE S
MOVE AND OPERATE MACHINE SAFELY SAF
PRECAUTIONS FOR OPERATIONS SAFETY
PROTECT AGAINST FALLING STONES AND
SAFETY • Traveling down a slope i
AVOID INJURY FROM BACK-OVER AND SWI
AVOID TIPPING SAFETY DO NOT ATTEMPT
PRECAUTIONS FOR LIGHTNING SAFETY
SAFETY TRANSPORTING SAFETY • The
SAFETY • Disconnect battery groun
STORE ATTACHMENTS SAFELY SAFETY •
PREVENT FIRES Check for Oil Leaks:
EVACUATING IN CASE OF FIRE SAFETY
REMOVE PAINT BEFORE WELDING OR HEAT
SAFETY SIGNS All safety signs and t
SAFETY SIGNS SS4604981 SS-1832 SS44
(2Way Multi Lever Equipped Machines
PEDALS, LEVERS AND MONITOR PANEL 1-
KEY SWITCH 1- OFF (Engine OFF) 2- O
OPERATOR’S STATION System Failure
LIQUID CRYSTAL DISPLAY (LCD), DISPL
OPERATOR’S STATION • Set Time C
AIR CONDITIONER OPERATION 1- Contro
TIPS FOR AIR CONDITIONER USAGE OPER
AM/FM RADIO OPERATION OPERATOR’S
OPERATOR’S STATION Clock Setting
ADJUSTING OPERATOR’S SEAT Seat Fo
SEAT BELT OPERATOR’S STATION WARN
MEMO BREAK-IN .....................
STARTING THE ENGINE OPERATING THE E
OPERATING THE ENGINE CHECK MACHINE
STOPPING THE ENGINE Stop the engine
• Pivot Turn Steer the machine by
TRAVELING ON SOFT GROUND DRIVING TH
DRIVING IN WATER OR ON SOFT GROUND
MEMO DRIVING THE MACHINE ..........
CONTROL LEVER (H-PATTERN: HITACHI E
BOOM-SWING PEDAL OPERATING THE MACH
BLADE LEVER OPERATING THE MACHINE U
PILOT CONTROL SHUT-OFF LEVER OPERAT
AUTO-IDLE CONTROL OPERATING THE MAC
GRADING OPERATION OPERATING THE MAC
BOOM CYLINDER MAY HIT BLADE OPERATI
USING RUBBER CRAWLER OPERATING THE
PIPING FOR BREAKER AND CRUSHER (OPT
OPERATING THE MACHINE 3. Do not ope
OPERATING THE MACHINE 10. Do not op
OPERATING THE MACHINE • When crus
OPERATING THE MACHINE EMERGENCY BOO
MEMO OPERATING THE MACHINE ........
LOADING TRANSPORTING WARNING: • A
UNLOADING TRANSPORTING WARNING: •
MEMO SPECIFICATIONS ...............
MEMO REFERENCE ....................
J Jump Starting ...................
MEMO INDEX ........................