5 years ago

0712-0299ZX60USB-3 - Flannery Plant Hire

0712-0299ZX60USB-3 - Flannery Plant Hire

Clean and Replace Air

Clean and Replace Air Conditioner Filter Clean Filter Circulating Air Filter --- every 500 hours Fresh Air Filter --- every 500 hours MAINTENANCE Replace Filter Circulating Air Filter --- After cleaning 6 times or so Fresh Air Filter --- After cleaning 6 times or so Removing Fresh Air Filter 1. Open left cover (2) after removing bolts (1) (2 used) and lock stay (3) securely to hold left cover (2). 2. Pull out fresh air filter (5) from filter case (4) inclining it a little forward. Removing Recirculation Air Filter 1. Recirculation air filter (7) is located in operator’s seat base (6). 2. Remove cover (9) after unlock knob (8). 3. Holding grips, pull recirculation air filter (7) toward you to remove. NOTE: Circulation air filter (7) is possible to be bent at the center. Pull out circulation air filter (7) bending it at the center not to interfere with the pedals. 7-66 4 1 2 5 6 8 9 7 3 M1M0-07-025 M1M0-07-026 M1M0-07-027 M1M0-07-028

MAINTENANCE CAUTION: Use reduced compressed air pressure (less than 0.2 MPa, 2 kgf/cm 2 ) for cleaning purposes. Clear the area of bystanders, guard against flying chips, and wear personal protection equipment including eye protection. Cleaning Clean both the fresh and recirculation air filters by blowing compressed air or washing with water. When washing the filters with water, follow the procedures below: 1. Wash with tap water. 2. Soak the filters in neutral detergent-mixed water for approx. 5 minutes. 3. Wash the filters with water again. 4. Dry the filters. Installation When installing the cleaned the circulation and/or fresh air filter or new filters, follow the reverse order of the Removing Filter procedures described on the front page. • Fresh Air Filter Insert fresh air filter (5) into filter case (4) inclining it a little forward. Unlock inside stay (3), close left cover (2) and retighten bolts (1) (2 used). • Circulation Air Filter Insert circulation air filter (7) into operator’s seat base (6) bending it at the center not to interfere with the pedals. Install cover (9) and lock knob (8). 7-67 5 4 M1M0-07-029 4 1 2 7 6 8 9 M1M0-07-026 M1M0-07-025 M1M0-07-028 M1M0-07-027

Neuson Zero-Tail Swing Excavator 50Z3/6003 - Chase Plant Hire
Get inspired by - Green Design Plant Hire
Ridgway Rentals Plant Machinery Guide May 17
3. Fusarium mycotoxins in cereals - Plant Research International ...
Quick Coupler Safety Quick Coupler Safety - Flannery Plant Hire
4878 JS200W Spec (Iss2) (UK) - Flannery Plant Hire
s130 skid-steer loader specifications - Ringby Plant Hire Ltd
MINIMIX 150 - Rapid Plant and Tool Hire
Hiring cell gatekeepers - ABC transporters in plant ... - BioTechnologia
15. LOADERS - CPHA - Contractors Plant Hire Association
New Copy of Stock List Hire Rates - Baileys Plant Hire Ltd
Pacific Coast Canola Begins Hiring for New Plant - Legumex Walker ...
JCB TRACKED EXCAVATOR | JS130 L T.A.B. - Exuma Plant Hire
Hilti - TE15-C - Light Duty Electric Breaker - Exsel Plant & Tool Hire Ltd
CES 3 2011 Hire of Plant SCHEDULES - Drakenstein municipality
Construction Plant World - 28th June 2018
Atlas Copco Portable air compressors Series 7, - Plant Hire UK Limited